DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture for trimless installation suitable for
downlighting and accent applications. Utilizes FIVE (5) PAR20 120V lamps.
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
Comments
Prepared by
SPECIFICATION FEATURES
A... Housing
branch wiring, 6 #12 90º C supply
is secured with threadless, bayonet ac-
tion. Optional retractable arm is available
Housing, junction box & trimless
meshplate assembly are all steel
conductors or 60º C for end of run. The
COMBOLIGHT®
Next Generation
Recessed
fixture is also UL listed as ‘access above for lamp pulldown and extreme aiming.
construction. Perforated meshplate allows ceiling not required’.
for trimless installation in drywall/plaster
Includes Med. base sockets.
ceilings by allowing the ceiling’s mudding
compound to be applied right up to the
edge of the fixture opening. Includes
a beveled “knife-edge” lips to ensure a
clean edge. Can accommodate 0.50” to
1.25” ceiling thickness. Optional Chicago
Plenum configuration available.
D... Electrical
F ... Mounting
Electrical accessible through ceiling
opening. J-Box located on the side
wall of the housing behind removable
access doors. Electrical components on
individually removable “trays” for easy
maintenance.
Butterfly Brackets accept 1/2” EMT,
C Channel, Tbar fasteners, and bar
hangers. Four tabs on housing for
securing to structure. Perforated flaps
along housing sides for securing trimless
insert to fixture and drywall.
Multi-Lamp Fixture
Five (5) Light
PAR20 120V
G... Labels
B... System Protection:
E ... Lamps
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
Five (5) PAR20 120V lamps mounted in
adjustable double gimbals. Lamp holders
are individually removable and may be re-
New Construction
Housing
holes in housing provide cooler operation. gressed 1” for additional cut-off. Lamp can
Ceiling Cut-Out: 5.44” x 24.02”
accept up to three optical accessories (i.e.
Trimless
C... Junction Box
Junction Box is UL listed for through
lens + hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp ring
38.90”
15.01”
7.45”
10.96”
34.77”
23.23”
Double
Gimbal
4.64”
45º x 45º
Adjust
4.65”
Perforated
Meshplate
Thermal
Protector
Integral Electronic
Metal Halide Ballasts
For use with PAR20 120V lamps 50W max.
ORDERING INFORMATION
C5
N
120
N
N
Configuration
Lamp Type / Wattage Label
050P20 = 50 Watt max. PAR20 120V
Primary Voltage
1
Lamp Mechanism
Trim Insert Finish
C5 = COMBOLIGHT
Recessed Five (5) Light
= 120V
G = Double Gimbal
N = Trimless
R
= Retractable Double Gimbal
Housing
Power Supply
Trim Insert
Housing Interior/Electrical Door/Sleeve
N = New Construction
N = None - Line Voltage Lamp
N = Trimless
Finish
C = Chicago Plenum
W = White
B
S
= Black
= Industrial Silver
rev 022408
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|