DESCRIPTION
Catalog #
Project
Type
Date
An adjustable Multi-lamp Recessed fixture with a 0.75” trim flange suitable
for downlighting and accent applications. Utilizes SIX (6) PAR20 Metal Halide
lamps.
Comments
Prepared by
For new construction applications. Insulation must be kept 3” from all sides
and at least 1” above the housing.
SPECIFICATION FEATURES
A... Housing
is also UL listed as ‘access above ceiling is secured with threadless, bayonet ac-
Housing, junction box & trim assembly
are all steel construction. Fixture utilizes
a removable trim sleeve to provide a
0.75” flange around the ceiling opening
and to help conceal the inner hardware
of the fixture from sight below the ceiling.
Can accommodate 0.50” to 1.25” ceiling
thickness. Optional Chicago Plenum
configuration available.
not required’.
tion. Optional retractable arm is available
for lamp pulldown and extreme aiming.
Includes Med. base sockets.
COMBOLIGHT®
Next Generation
Recessed
D... Electrical
Electrical accessible through ceiling
opening. J-Box located on the side wall
F ... Mounting
of the housing behind removable access Butterfly Brackets accept 1/2” EMT,
Multi-Lamp Fixture
doors. Integral electronic metal halide
C Channel, Tbar fasteners, and bar
ballasts on individually removable “trays” hangers. Four tabs on housing for
for easy maintenance. May also be con-
figured for remote power.
securing to structure.
Six (6) Light
PAR20 Metal Halide
G... Labels
B... System Protection:
cULus listed for non-type IC
applications, suitable for use in damp
locations.
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture. Vent
E ... Lamps
Six (6) PAR20 Metal Halide lamps mounted
in adjustable double gimbals. Lamp holders
holes in housing provide cooler operation. are individually removable and may be re-
gressed 1” for additional cut-off. Lamp can
New Construction
Housing
w/ 0.75” Trim Flange
Ceiling Cut-Out: 5.44” x 28.67”
C... Junction Box
accept up to three optical accessories (i.e.
lens + hex louver + snoot). 45º x 45º locking
lamp adjustment. Beveled-edge lamp ring
Junction Box is UL listed for through
branch wiring, 6 #12 90º C supply con-
ductors or 60º C for end of run. The fixture
44.59”
15.01”
7.45”
6.14”
29.37”
40.46”
27.87”
Double
Gimbal
4.64”
45º x 45º
Adjust
4.65”
Thermal
Protector
Integral Electronic
Metal Halide Ballasts
For use with 20W or 39W PAR20MH lamps.
ORDERING INFORMATION
C6
E
T
Configuration
Lamp Type / Wattage Label
Power Supply
Lamp Mechanism
Trim Finish
C6 = COMBOLIGHT
Recessed Six (6) Light
020M20 = 20 Watt PAR20 Metal Halide
Voltage
G = Double Gimbal
W = White
039M20 = 39 Watt PAR20 Metal Halide
1
2
= 120V
= 277V
= Retractable Double Gimbal
B
S
= Black
R
= Industrial Silver
Housing
Power Supply
Trim Flange
T = 0.75” Trim Flange
Housing Interior/Electrical Door/Sleeve
N = New Construction
E = Electronic Metal Halide
Finish
C = Chicago Plenum
Ballast
W = White
B
S
= Black
= Industrial Silver
rev 022408
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031
Download from Www.Somanuals.com. All Manuals Search And Download.
|