VCR
User’s Guide
Changing Entertainment. Again.
VR708HF
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Introduction
Key Features Overview
Your VCR is equipped with features that will add to your recording and viewing experience.
The following information summarizes a few of these features. Chapter 4 provides more
information about the rest of the VCR’s features and how to use them.
VCR Plus+® GOLD System
The VCR Plus+ GOLD system makes VCR set up automatic by setting and
updating the clock and channel list for you. Once set up, entering a PlusCode®
programming number will automatically record specific programming.
Requirements: Make sure the VCR Plus+ GOLD system is active, and that Auto
Channel Search and time set features are correct.
®
This feature uses patented technology that detects and marks most commercials
on your recordings. The VCR determines where commercials are located, marks
the beginnings and ends of detected commercial segments, then easily skips
over them during playback. This feature does not erase commercials from
the tape.
®
This feature helps locate the beginning of a purchased or rented movie as well
as skip thorugh previews. You can go to the beginning of the movie, or, skip
from one preview/long commercial to the next.
VCR1
ON
•
OFF
TV
Universal Back-Lit Remote Control
DVD VCR2 AUX SAT CABLE
•
MUTE
SEARCH
CH
CH
+
-
Description: The VCR’s remote control can operate most RCA, GE, and Proscan
TVs with no additional steps. It can be programmed to operate many other
brands of TVs, VCRs, cable boxes, and satellite receivers. Back-lit buttons offer
easier control in the dark.
SPEED
GUIDE
GO BACK
INFO
OK
MENU
CLEAR
1
4
7
2
5
8
0
3
6
9
INPUT
ANTENNA
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUSE
-
TRACKING
+
EDIT FR.ADV
Requirements: Point the remote control at the active component and press the
ON•OFF button to see if it can be operated.
Auto Clock Set
Rec
Ch 36
Record Length 1:30
Description: The VCR automatically looks for time and date information after
most power outages as well as each time the machine is turned off. Using time
information broadcast in TV signals (if available), the VCR’s clock sets itself.
Requirements: Start Auto Clock Set using the VCR’s on-screen menus.
Press REC to set length
VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
COMMERCIAL ADVANCE and MOVIE ADVANCE are registered trademarks of SRT, Inc.; a Jerry Iggulden invention licensed in association with Arthur D. Little Enterprises.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Express Recording (XPR)
TIMER RECORDINGS
Description: XPR quickly records the remaining portion of a program already
in progress. XPR is a great way to capture the end of a sporting event that has
run into overtime or a live broadcast that runs long.
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
Requirements: Repeatedly press the Record button on the VCR front panel or
remote control to set the desired duration of time to record.
0 Exit
Pro-Tect Plus™ Locking
Description: Locks the VCR so that buttons on the front panel and remote
control won’t operate the VCR. This feature protects timer programs from
frustrating accidents such as being left on at the time of recording.
Requirements: Lock the VCR by pressing and holding the POWER button on
the remote control for six seconds. The front panel display will blink for several
seconds. The VCR unlocks by pressing and holding the POWER button on the
remote control, again for six seconds. The front panel display will blink again
and release the lock on the system.
VIDEO
AUDIO
RIGHT
Front Audio/Video Input Jacks
INPUT
LEFT/MONO
Description: The VCR has Audio/Video (A/V) input jacks on both the front and
rear of the unit (there are output jacks on the rear panel only). The front A/V
jacks make it easy to plug in an external A/V device, such as a camcorder.
Requirements: Make sure that all A/V connections are snug. To see a
connected device’s image, turn the VCR to its Video Line Input by pressing the
remote control’s INPUT button.
Hi-Fi Quality Sound
Description: When using the VCR’s A/V jacks, you can feed stereo quality
sound from your VCR to your TV or stereo. Stereo quality sound allows for two
separate channels of sound (Left and Right) to be heard.
Requirements: Using A/V jacks and cables to connect the VCR to the TV or
stereo (see page 60 for an advanced connection setup diagram).
SQPB S-VHS Quasi Playback
Description: Your VCR will be able to play back tapes recorded in S-VHS or
S-VHS-ET mode (in VHS quality).
Requirements: Insert a tape recorded in S-VHS or S-VHS-ET mode and pressing
the PLAY button on the remote control or PLAY•PAUSE on the VCR.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Product Registration............................................................................................................. i
Introduction ............................................................................................................................ 1
Key Features Overview ......................................................................................................... 1
Connections & Setup ........................................................................................................... 5
Things to Consider Before Connecting Components .......................................................... 6
Cable Considerations ............................................................................................................ 6
Choose Your Connection ...................................................................................................... 7
Using the RF Coaxial Cable to Connect the VCR to a TV .............................................. 7
TV + VCR .......................................................................................................................... 8
TV + VCR + Satellite Receiver ......................................................................................... 9
TV + VCR + Cable Box ................................................................................................... 10
Set the VCR’s CH 3/4 Switch ................................................................................................ 11
Plug in the VCR.................................................................................................................... 11
Put Batteries in the Remote Control .................................................................................. 11
Turn on the TV and VCR...................................................................................................... 11
Tune the TV.......................................................................................................................... 11
Using the Remote Control to Navigate On-Screen Menus ............................................... 12
Complete the QuickSet Guide...................................................................................... 12
Accessing Menus ........................................................................................................... 12
VCR Basics ............................................................................................................................ 13
Playing a Tape ............................................................................................................... 13
Automatic Rewind ........................................................................................................ 13
Tape Eject ...................................................................................................................... 13
Recording............................................................................................................................. 13
Check the Safety Tab .................................................................................................... 13
Using the VCR’s Menu System ....................................................................................... 15
Using On-Screen Menus to Set Up Features ...................................................................... 16
Language....................................................................................................................... 16
Setup for a Digital Satellite Receiver ........................................................................... 16
Cable Box Setup ............................................................................................................ 18
Cable Box Codes .................................................................................................... 19
VCR Channels List.......................................................................................................... 20
Auto Channel Searching ....................................................................................... 20
Changing the Signal Type ..................................................................................... 20
Adding or Removing Channels .................................................................................... 21
Time and Date............................................................................................................... 21
Auto Clock Set Feature.......................................................................................... 21
To Turn Auto Clock Set ON .............................................................................. 22
Setting the Time Zone ..................................................................................... 22
Setting Daylight-Saving Time .......................................................................... 22
Setting Time and Date Manually .......................................................................... 23
Additional Set Up Features in the Preferences Menu....................................................... 23
Remote VCR1/VCR2 Option .......................................................................................... 23
Auto Play ....................................................................................................................... 24
Auto TV/VCR.................................................................................................................. 24
EnergySaver................................................................................................................... 25
Front Panel Brightness (VCR Display) .......................................................................... 25
Tape Speed .................................................................................................................... 25
Set Auto Repeat ............................................................................................................ 26
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Using the Remote Control ............................................................................................... 27
Remote Buttons................................................................................................................... 28
Using the INPUT Button ............................................................................................... 30
Operating a TV with the VCR’s Remote Control ............................................................... 31
Do You Need to Program the Remote?....................................................................... 31
Operating the TV................................................................................................... 31
Using the VCR’s Features.................................................................................................. 33
Recording Features ............................................................................................................. 34
Express Recording (XPR) ............................................................................................... 34
Timer Recording............................................................................................................ 35
Stopping a Timer Recording ................................................................................. 35
Reviewing and Clearing Programs ....................................................................... 35
VCR Plus+ GOLD Programming System.............................................................................. 36
Mapping VCR Plus+ Programming System Channels Manually........................................ 37
VCR Plus+ System Worksheet ....................................................................................... 39
Recording Broadcast Stereo TV or SAP (Second Audio Program) .................................... 40
Copying and Editing Tapes Using Two VCRs...................................................................... 40
Picture Search Options ........................................................................................................ 41
Forward and Reverse Search ........................................................................................ 41
Slow Motion .................................................................................................................. 41
Frame Advance ............................................................................................................. 41
Index Search .................................................................................................................. 42
Go-To Search ................................................................................................................. 42
Commercial Advance .......................................................................................................... 43
Movie Advance .................................................................................................................... 45
Pro-Tect Plus™ Locking Feature ......................................................................................... 46
Tracking................................................................................................................................ 46
Time Counter ....................................................................................................................... 46
On-Screen Displays .............................................................................................................. 47
Audio Set-Up Features ........................................................................................................ 48
Reception ...................................................................................................................... 48
Tape Playback ...................................................................................................................... 48
Other Information .............................................................................................................. 49
Troubleshooting Tips........................................................................................................... 50
General VCR Problems .................................................................................................. 50
Recording Problems ...................................................................................................... 51
Playback Problems ........................................................................................................ 51
Questions and Answers About Commercial Advance ....................................................... 53
Front Panel .......................................................................................................................... 54
Display Panel ....................................................................................................................... 55
Back Panel............................................................................................................................ 56
Specifications ....................................................................................................................... 57
Cleaning the VCR ................................................................................................................ 57
RCA VCR Limited Warranty................................................................................................. 58
Finding the TV’s Video Line Input ...................................................................................... 59
Advanced Connection ......................................................................................................... 60
Glossary ................................................................................................................................ 61
Index .................................................................................................................................... 62
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Connections & Setup
Chapter Overview:
• Things to Consider Before Connecting
• Choosing Your Connection
• Making Connections
• Navigating On-Screen Menus
• Completing the QuickSet™ Guide
• Basic Recording
Changing Entertainment. Again.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Things to Consider Before Connecting
Components
Protect Components From Power Surges
•
Connect all components before plugging any power cords into the wall outlet.
•
Always turn off the TV and other components before you connect or disconnect any cables.
Position Cables to Avoid Audio Hum or Interference
•
Insert all cable plugs firmly into their jacks.
•
Place any Audio/Video (A/V) cables to the side(s) of the TV’s back panel instead of straight
down the back after connecting components.
•
•
Try not to coil any twin-lead cables and keep them away from all A/V cables as much as
possible.
Make sure all antennas and cables are properly grounded. Refer to the Safety Tips sheet
packed with your unit for detailed information.
Protect Components From Overheating
•
Never block ventilation slots in any component. Arrange the components so that air can
circulate freely.
•
•
•
Do not stack components.
Allow adequate ventilation when placing components in a stand.
Place an amplifier or satellite receiver on the top shelf of a stand so heated air rising from it
will not flow around other components.
Cable Considerations
The RF coaxial cable supplied with your VCR carries both sound and picture information. This is
the cable used in all connection diagrams illustrated in this chapter.
If your TV has A/V input jacks, you should use A/V cables (not supplied) to connect the VCR to
the TV. A/V cables provide better picture and sound quality than an RF coaxial cable. If you
would like to hook up your VCR using A/V cables, refer to the Advanced Connection
information on page 60 in the Other Information chapter of the manual.
6
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Using the RF Coaxial Cable to Connect the
VCR to a TV
This graphic shows the RF coaxial cable supplied with your VCR. This will be
the cable used for the basic connections represented in this chapter.
Notes: To hear stereo sound, you will need to purchase Audio/Video (A/V)
cables (not provided) and connect the VCR to the TV. A/V jacks and cables
also provide a superior image and sound quality. For details about using
this advanced setup, see the instructions on page 60.
RF Coaxial Cable
Using A/V jacks to connect the VCR to the TV requires tuning to the TV’s
Video Line Input to see the VCR’s picture. For more information about
finding your TV’s Video Line Input, see page 59.
If you prefer, we can provide you with the name of an Authorized Service
Representative who will visit your home for a fee to install your electronic
entertainment system and to instruct you in its operation. For details about
this service, call 1-888-206-3359.
Choose Your Connection
There are several ways to hook up your VCR depending on the components connected. Please use
the following chart to determine which connection is best for you and proceed to the appropriate
page.
Connection
Title
Go To
Components
TV + VCR
page 8
TV + VCR +
Satellite Receiver
page 9
TV + VCR +
Cable Box
page 10
Chapter 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
From Cable
or Antenna
VCR
2
ANT. IN
AUDIO
R
L
RF OUT
IN
OUT
CH.
3
4
VIDEO
TV (back panel)
1
AUDIO
VIDEO
L / MONO
L
R
IN
OUT
CABLE/
ANTENNA
S-VIDEO
TV + VCR
Need Some Help?
Note: Your television back panel may not look exactly like the model
shown here.
If you prefer, we can
provide you with the
name of an Authorized
Service Representative
who will visit your home
for a fee to install your
electronic entertainment
system and to instruct you
in its operation. For
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on
the back of the VCR and the other end to the TV’s antenna input jack.
2. Connect the antenna/cable feed to the VCR
Connect your TV antenna/cable feed’s RF coaxial cable to the ANT. IN jack
details about this service,
call 1-888-206-3359.
on the VCR.
Note: Flip the CH 3/4 switch on the back of the VCR to the channel that is
not used in your area. This will be the channel that the TV must be tuned
to in order to see the VCR’s picture.
Go To Page 11
8
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
From Cable
or TV Antenna
From
Satellite
SATELLITE
RECEIVER
Position Remote-Controllable
Satellite Receiver
3
IN FROM ANT
OUT TO TV
CH3
CH4
OUT
R
4
SATELLITE
IN
VCR
VIDEO
L
S-VIDEO
Satellite
Receiver
2
VCR
VCR's
Signal
ANT. IN
RF OUT
AUDIO
R
L
Transmitter
IN
OUT
CH.
3
4
VIDEO
Controlling the Satellite Receiver
Your VCR has a built in infra-red
transmitter that can send commands
to certain remote-controllable devices
(like satellite receivers). This is helpful
for timer recordings, changing
channels, etc.
TV
1
AUDIO
VIDEO
L / MONO
R
IN
L
OUT
Place the satellite receiver on top of
the VCR as shown in the diagram.
CABLE/
ANTENNA
S-VIDEO
TV + VCR + Satellite Receiver
Note: Your television and/or satellite receiver back panels may not look exactly like
the models shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of
the VCR and the other end to the TV’s antenna input jack.
2. Connect satellite receiver to the VCR
Connect one end of an RF coaxial cable (not included) to the antenna output jack on
the satellite receiver and the other end to the ANT. IN jack on the VCR.
3. Connect the antenna to your satellite receiver
If necessary, connect an antenna or cable box RF coaxial cable (not included) to the
antenna input jack on the satellite receiver.
4. Connect the satellite feed to the satellite receiver
Connect the satellite receiver’s RF coaxial cable feed (not included) to the satellite
input jack on the satellite receiver.
Go To Page 11
Chapter 1
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
From Cable
Line Feed
CABLE BOX
Position Remote-Controllable
Cable Box
3
IN FROM ANT
OUT TO TV
VCR
CH3
CH4
Cable Box
2
Transmitter
VCR's
VCR
Signal
ANT. IN
AUDIO
R
L
Controlling the Cable Box
RF OUT
IN
OUT
CH.
Your VCR has a built in infra-red
transmitter that can send commands
to certain remote-controllable devices
(like cable boxes). This is helpful for
timer recordings, changing channels,
etc.
3
4
VIDEO
TV
1
AUDIO
VIDEO
L / MONO
R
IN
Place the satellite receiver on top of
the VCR as shown in the diagram.
L
OUT
CABLE/
ANTENNA
S-VIDEO
TV + VCR + Cable Box
Note: Your television and/or cable box back panels may not look exactly like the
models shown here.
1. Connect the VCR to the TV
Connect one end of the supplied RF coaxial cable to the RF OUT jack on the
back of the VCR and the other end to the TV’s antenna input jack.
2. Connect the cable box to the VCR
Connect one end of a second RF coaxial cable (not included) to the cable box’s
TV output jack and the other end to the ANT. IN jack on the VCR.
3. Connect the cable feed to your cable box
Connect the RF coaxial cable feed (not included) to the antenna input jack on the
cable box.
Go To Page 11
10
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Set the VCR’s CH 3/4 Switch
The CH 3/4 switch on back of the VCR determines what channel the TV must be tuned to see
the VCR’s image. Choose whichever channel is not used locally in your area.
Note: If you connected components using A/V jacks and cables, the VCR’s signal must be
viewed using the TV’s Video Line Input. To find the Video Line Input, refer to the manual
that came with the TV or see How to Find Your TV’s Video Line Input on page 59 in the
Other Information section of this manual.
Plug in the VCR
Your VCR’s power cord has a plastic band strung through the blades. Remove the plastic band
before plugging the cord into the power outlet. To remove the band, cut with a pair of
scissors and pull it free of the blades. Once the plastic is removed, match the wide blade of the
power cord to the wide slot in the AC outlet. Be sure to insert the plug completely.
Put Batteries in the Remote Control
1. Remove the battery compartment cover on the remote control.
2. Insert new batteries matching the polarities (+ and –) on the batteries with
the diagram in the battery compartment.
3. Put the battery compartment cover back on the remote.
Turn on the TV and VCR
Turn on the TV and press the VCR button on the remote control to turn it on.
Note: If you have an RCA, GE, or Proscan TV, your VCR’s remote control
may be able to operate it without being programmed. Press the TV button
on the remote control and then the ON•OFF button. If neither one turns on
the TV, see Using the Remote Control starting on page 27 for details about
programming the remote control to operate other brands of TVs.
Tune the TV
Tune the TV to the VCR-viewing channel. The VCR viewing channel is channel
3, 4, or the TV’s video line input.
•
If you connect your VCR using RF coaxial cable only, turn the TV to
channel 3 or 4 (whichever was set on the CH 3/4 switch).
•
If you connected the VCR using A/V jacks and cables, select the TV’s video
line input. For more information see How to Find the TV’s Video Line Input
on page 59 in the Other Information section of this manual.
Chapter 1
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Using the Remote Control to
Navigate On-Screen Menus
The technical term is “Navigation” – how you move through the on-screen menus. The theory is
the same for all the menu screens: highlight your choice and select it.
To highlight a menu item, press the remote control’s arrow buttons to move the highlight cursor
to a desired menu item. Use the up or down arrow button to move up or down, and right or left
arrow buttons to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Selecting a menu item can take you to another menu, activate a choice, or activate a
data entry area (such as the hour field in the Set Time menu).
Complete the QuickSet Guide
The menu system in your VCR allows you to customize your preferences as
well as use all the VCR’s features. To help you use the VCR as quickly as
possible, there is an initial QuickSet Guide that walks you through several
important setup steps at one time.
Select a language.
Seleccione un idioma.
Choisissez une langue.
1 English
2 Español
3 Français
The first time you turn on the VCR, you will be able to set up available
channels, time and date information, and more. The first menu you will see
asks which language you prefer to have the on-screen menus appear in.
Note: With numbered menu choices, press the corresponding number
button on the remote control to automatically select it. In the case of the
language menu, press 1 for English, 2 for Español (Spanish), or 3 for
Français (French).
The remaining menus throughout the setup will appear in the language chosen.
Just follow the step-by-step procedures until the QuickSet Guide is complete.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Setup
Accessing Menus
The series of preferences that are set in the QuickSet Guide can also be
handled individually using the VCR’s on-screen menu system. There are other
settings not covered in the initial setup that are also handled using the on-
screen menus.
6 Preferences
7 Audio
8 Language
0 Exit
For example, if you decide to run the QuickSet Guide again, you can access the
Setup menu by pressing the remote control’s MENU button, then the 5 button to
choose Setup. From there, you can start the QuickSet Guide from the beginning.
All of the VCR’s menus are
accessed through the Main
Menu. Press the remote
control’s MENU button to
start.
All on-screen menus are accessed the same way, starting in the Main Menu
which is displayed by pressing the remote control’s MENU button.
Note: See chapter two, Using On-Screen Menus, for details about changing
the VCR’s individual settings.
12
Chapter 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
VCR Basics
Once your initial settings are complete, you can begin using your VCR. In order to begin, you
must first understand some basic concepts.
Playing a Tape
1. Tune the TV to your VCR viewing channel (03, 04, or the video line input).
2. Insert a tape in the VCR.
If the Auto Play feature is set to ON, the tape automatically begins playback
(if the safety tab on the tape is removed).
STOP•EJECT
RECORD
TV•VCR
POWER
VIDEO
INPUT
AUDIO
LEFT/MONO RIGHT
TAPE SPEED
INPUT
REV
FWD
CHANNEL
TRACKING
•
Press FWD or REV (FORWARD or REVERSE on the remote control) to
cue the tape at the desired starting position.
•
•
•
Press PLAY (if necessary) to begin tape play.
Press PAUSE for stop action.
Press TRACKING up or down (TRACKING + or – on the remote
Automatic Tracking
control) to remove any streaks from the picture, if necessary.
The VCR has automatic tracking
which adjusts the picture when
playing back a tape recorded on
another VCR. To adjust tracking
manually, use the TRACKING -/+
buttons on the remote control.
•
Press STOP to stop playback.
Automatic Rewind
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback. While rewinding, you can press the ON•OFF button and the VCR will
turn off after finishing. If the tape has no safety tab, it will be ejected.
Tape Eject
Press the EJECT button on the VCR when stopped to eject the tape. You can
also press and hold the remote control’s STOP button for three seconds.
Recording
To Capture Programming with Basic Recording Methods:
1. Set the tape speed by pressing the SPEED button on the remote control
(see Tape Speed on page 25 for information about recording speeds).
2. Press the RECORD button to begin recording.
3. Press the STOP button to halt recording.
If you just want to pause the recording for a short time (like during a
commercial), press PAUSE instead of STOP.
Check the Safety Tab
No matter which recording option you use, make sure there is a tape in the
VCR with its safety tab in place. You cannot record on a tape when the safety
tab is removed. If the safety tab is removed and you want to record, simply
cover the hole with adhesive tape.
Safety Tab
Chapter 1
13
Download from Www.Somanuals.com. All Manuals Search And Download.
This page left blank intentionally
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the VCR’s
Menu System
Chapter Overview:
• Using On-Screen Menus
• Satellite Receiver Setup
• Cable Box Setup
• Setting Time and Date
• Setting VCR Preferences
Changing Entertainment. Again.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Using On-Screen Menus to Set Up Features
You set up many of the VCR’s features by using the menu system as discussed in the previous
chapter. Each feature that appears in the QuickSet Guide is explained in this section as well as a
few other features you should set up to get the most out of your VCR.
Note: Not all the VCR screens are shown in this manual when explaining how to access
features.
Language
Selecting your preferred language determines how the on-screen displays will
appear. To change the language:
1. Press MENU to display the VCR MAIN MENU.
2. Press the 8 button to select LANGUAGE.
3. Select English, Spanish (Español), or French (Français).
LANGUAGE
Note: You can also use the up and down arrow buttons and the OK button
on the remote control to navigate through on-screen menus.
Select a language.
1>English
2 Español
3 Français
Press MENU to continue
Is Something Missing?
Setup for a Digital
Satellite Receiver
With this setup, the VCR turns on an RCA, ProScan, or GE satellite receiver
antenna and tunes it to the desired channel at the start time of a timer
recording. For other brands, the VCR tunes the receiver to the desired channel
only if the receiver is turned on. Position the satellite receiver above the VCR as
shown in the Connections section.
These instructions will not
show all of the step-by-step
On-Screen Menus. Make sure
to follow the instructions
completely to get to the
menus being discussed.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display CHANNELS menu.
3. Press 6 to select SAT Setup.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
CABLE
0 Exit
16
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
4. Enter the output channel of your satellite receiver, usually 03, 04, or video
line input and press MENU. The VCR confirms that it receives all DBS
signals on the specified channel.
SAT SETUP
On what channel does
the VCR receive signals
from the SAT receiver?
--
Enter 01-13 or INPUT
Press MENU to cancel
5. Press MENU and enter the code for your digital satellite receiver from the
Satellite Receiver Codes list (shown below).
SAT SETUP
Enter the code for your
SAT receiver from the
list in your User's
Manual.
Note: RCA and Proscan satellite receivers operate with either 3-digit or
4-digit channel numbers depending on the model. Please note how many
numbers are entered on your RCA or Proscan satellite receiver before
entering a code number into the VCR’s SAT Setup menu.
--
Press MENU to cancel
6. Turn on your satellite receiver and tune it to channel 100 and then press the
MENU button. Follow the on-screen directions.
Please turn on your
SAT Receiver and tune
it to channel 100.
Press MENU to continue
Once you have completed the setup, the VCR confirms the satellite receiver
setup is completed.
Satellite Receiver Codes
Dishnet (Echo)
GE
07
00, 01
06
Hughes Network
Panasonic
Philips
02
08
Primestar
05
ProScan (using 3-digit channels) 00, 01
ProScan (using 4-digit channels) 10, 11
RCA (using 3-digit channels)
RCA (using 4-digit channels)
Sony
00, 01
10, 11
04
Toshiba
03
Note: This VCR may not control all
models of the brands shown.
Chapter 2
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Cable Box Setup
This setup applies only when all channels are received through a cable box. In this case, the
VCR will automatically enter the channel used to view cable box programming. Your VCR will
use this channel for all future timer recordings.
1. Press MENU to display the VCR MAIN MENU.
2. Press 4 to display the CHANNELS menu.
3. Press 5 to display the CABLE BOX SETUP menu.
4. Select one of the three choices. If ALL Channels is selected, enter the output
CABLE BOX SETUP
channel of the cable box (usually 03 or 04), or if A/V jacks connect the VCR
to the TV, press the INPUT button on the VCR’s remote control.
Do you use your cable
box to receive ALL
channels or only SOME
channels?
1 ALL channels
2 Only SOME channels
3 Cancel setup
5. Select whether your cable box is remote controllable.
CABLE BOX SETUP
Can your cable box be
operated with a remote
control?
1 Yes
2 No
6. If your cable box is remote-controllable, turn it on and tune it to channel 2.
Press MENU to continue.
CABLE BOX SETUP
Please turn on your
Cable Box and tune
it to channel 2.
Press MENU to continue
7. Enter the code for your cable box from the Cable Box Codes list (see the
next page), then press the MENU button to continue.
8. Select one of the choices and follow the on-screen instructions.
CABLE BOX SETUP
Once you have completed the setup, the VCR confirms the outcome– either
complete or canceled.
Did the cable box
tune to channel 9?
1 Yes, setup is complete
2 No, try again
3 No, cancel setup
18
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Cable Box Codes
ABC ..............................................................002, 003, 004, 005, 006, 007, 053
Antronix ................................................................................................. 008, 009
Archer ....................................................................................008, 009, 010, 011
Cabletenna ......................................................................................................008
Cableview ........................................................................................................008
Century............................................................................................................011
Citizen ..............................................................................................................011
ColourVoice .......................................................................................... 012, 013
Comtronics ............................................................................................ 014, 015
Contec .............................................................................................................016
Eastern .............................................................................................................017
Garrard ............................................................................................................011
GC Electronics ...............................................................................................009
Gemini..................................................................................................... 018, 019
General Instrument..................................................................... 003, 042, 043
Hamlin ........................................................................... 020, 021, 022, 035, 045
Hitachi ..............................................................................................................003
Hytex................................................................................................................002
Jasco..................................................................................................................011
Jerrold ........................................................................... 003, 005, 007,018, 023,
024, 046, 053, 042, 043
Magnavox.........................................................................................................025
Memorex .........................................................................................................026
MovieTime.................................................................................... 002, 027, 028
NSC ................................................................................................ 002, 027, 028
Oak ................................................................................................. 002, 016, 029
Panasonic ................................................................................................ 048, 052
Paragon ............................................................................................................026
Philips .................................................. 011, 012, 013, 019, 025, 030, 031, 032
Pioneer.................................................................................................... 033, 034
Pulsar ................................................................................................................026
RCA ................................................................................................ 047, 049, 052
Realistic ............................................................................................................009
Regal ........................................................................................................ 022, 035
Regency............................................................................................................017
Rembrandt ......................................................................................................003
Runco ...............................................................................................................026
Samsung .................................................................................................. 014, 034
Scientific Atlanta...................................................................006, 036, 037, 038
Signal........................................................................................................ 014, 018
Signature ..........................................................................................................003
SL Marx ............................................................................................................014
Sprucer.............................................................................................................052
Starcom.......................................................................................... 007, 018, 053
Stargate ................................................................................................... 014, 018
Starquest..........................................................................................................018
Tandy ................................................................................................................040
Teleview ...........................................................................................................014
Tocom ............................................................................................ 004, 023, 041
Toshiba .............................................................................................................026
Tusa ...................................................................................................................018
TV86 .................................................................................................................027
Unika .............................................................................................. 008, 009, 011
United Artists .................................................................................................002
United Cable...................................................................................................053
Universal ................................................................................008, 009, 010, 011
Videoway .........................................................................................................044
Viewstar .................................................................................015, 025, 027, 040
Zenith ............................................................................................. 026, 050, 051
This VCR may not control all models of the brands that are shown.
Chapter 2
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
VCR Channels List
Your VCR may come with a list of channels preset at the factory. Even though it may come with
such a list, you might want to add or delete certain channels.
Note: If you use a cable box to view all channels, this step is not necessary.
Auto Channel Searching
Notes: Use Auto Channel Search to place all available channels in memory.
If you ever change cable or antenna signals, you may need to run the Auto Channel Search
feature again.
1. Press the MENU button to display the VCR MAIN MENU.
2. Press 4 to select CHANNELS.
3. Press 1 to select AUTO CHANNEL SEARCH.
4. Select one of the three options:
AUTO CHANNEL SEARCH
Cable TV searches for cable stations.
What type of signal
are you using?
Antenna searches for local broadcast stations.
1 Cable TV
2 Antenna
Detect Automatically decides which input to use for you.
3 Detect Automatically
Note: With Detect Automatically, a strong cable or antenna signal in your
area may cause channels to be detected inaccurately. If this should happen,
manually select the input signal for the system you have.
0 Cancel
The VCR begins scanning for channels available in the area (taking about
one-to two minutes). When scanning is complete, the VCR tunes to the
lowest channel available. After completing Auto Channel Search, pressing
the remote control’s CHAN + or - buttons should select only active
channels.
Changing the Signal Type
This feature is useful if your cable signal goes out; it allows you to switch to a
regular antenna for alternate television reception.
1. Press the MENU button to display the VCR MAIN MENU.
2. Press the 4 button to choose CHANNELS.
3. Press 3 to choose between Signal Type: Cable and Antenna. When finished,
CHANNELS
press 0 to exit back to the Main Menu and 0 again to return to normal
1 Auto Channel Search
2 Add/Remove Channels
viewing.
3 Signal Type:
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
CABLE
0 Exit
20
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Adding or Removing Channels
You might want to add or remove channels after using Auto Channel Search, especially if there
are weak signals or channels with content you don’t care for.
1. Press the MENU button to display the VCR MAIN MENU.
2. Press 4 to choose CHANNELS.
3. Press 2 to choose ADD/REMOVE CHANNELS. To go to the channel you want to add or
remove, use the remote control’s CHANNEL + or – buttons or enter a specific channel
number using the number buttons.
Once the desired channel is displayed, the on-screen menu will tell you if the channel is
currently in the VCR’s viewing list. Press the CLEAR button to remove a channel from the
available channels list or press the INFO button to add it.
4. Press the MENU button to exit out of the menus.
Note: To view active channels, use the remote control’s CHANNEL + and – buttons. You can
also access channels not available in the active channel list by using the remote control’s
number buttons to enter a specific channel number.
Time and Date
Your VCR gives you two ways to set the time and date; manually or by using the Auto Clock Set
feature. Using Auto Clock Set enables the time to be updated each time the VCR is turned off by
using time and date information carried in certain broadcast signals (not available in all areas).
Auto Clock Set Feature
The Auto Clock Set feature is set to ON by default at the factory. In the ON setting, the VCR
looks for a channel carrying time data and updates the clock automatically. In order for Auto
Clock Set to work properly though, you should complete the interactive Setup (Number 5 in the
VCR Main Menu), including entering your Zip Code.
To Complete the Interactive Setup:
1. Press the MENU button to display the VCR MAIN MENU.
2. Press 5 to choose Setup.
3. Follow the on-screen instructions until the setup process is complete.
Notes: Auto Clock Set is available only in limited areas.
You must set available channels for Auto Clock Set to work.
If the time does not automatically set after trying for ten minutes, manually set the time
and date information using the TIME menu (see the next page for information on manually
setting time and date information).
Chapter 2
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
To Turn Auto Clock Set ON
Note: make sure that you complete the Interactive Setup (Number 5 in the
VCR MAIN MENU) before using Auto Clock Set.
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to choose TIME.
3. Press the 2 button repeatedly to toggle between Auto Clock Set ON and OFF.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
ON
4 Set Daylight Saving
Time Data was found
on channel 20.
0 Exit
Setting the Time Zone
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to choose TIME.
3. Press 3 to chose SET TIME ZONE.
4. Select your time zone by pressing the corresponding number button.
SET TIME ZONE
What is your Time Zone?
1 Eastern
2 Central
3 Mountain
If you select Automatic for your time zone, the VCR sets the clock using the
first time information it finds. If the time set is not correct, select another
time zone or set the time and date through the menu system.
4 Pacific
5 Alaska
6 Hawaii
7>Automatic
Press MENU to continue
Setting Daylight-Saving Time
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to choose TIME.
3. Press 4 to choose SET DAYLIGHT SAVING.
TIME
1 Set Time and Date
2 Auto Clock Set:
3 Set Time Zone
ON
4 Set Daylight Saving
Time Data was found
on channel 20.
0 Exit
4. Select the appropriate option.
SET DAYLIGHT SAVING
Notes: DST stands for Daylight–Saving Time.
Does your area observe
Daylight Saving Time
from April to October?
If you choose Automatic for the time zone, the VCR sets the clock using any
DST information broadcast in the channel’s signal.
1 Yes, DST is observed
2 No
3>Automatic
Press MENU to continue
22
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Displaying Time and Date
Setting Time and Date Manually
Pressing the INFO button on
the remote control or VCR
displays the time and date
on screen temporarily.
If Auto Clock Set was unsuccessful, set the time and date manually in the TIME
menu. Auto Clock Set is automatically turned off when time and date
information is set this way.
1. Press MENU to display the VCR MAIN MENU.
2. Press 3 to choose TIME.
3. Press 1 to choose SET TIME AND DATE.
4. Enter the data using the number buttons. Press 0 before single-digit
numbers and follow the on-screen directions to exit the menus.
SET TIME AND DATE
Time --:--
(hh:mm)
Date --/--/--
Press MENU to cancel
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
Additional Set Up Features in the
Preferences Menu
ON
ON
2:00
AUTO
SLP
Note: The features described on the following pages are all accessed
through the PREFERENCES menu.
To Access the PREFERENCES menu:
8 COMMERCIAL ADVANCEE
0 Exit
1. Press MENU to display the VCR MAIN MENU.
2. Press 6 to select PREFERENCES.
You are now ready to select an item from the PREFERENCES menu to set up.
Remote VCR1/VCR2 Option
Your VCR’s remote control unit can operate up to two compatible RCA, GE, or
Proscan VCRs. Most compatible VCRs automatically respond to the VCR1 button
without the remote control being programmed. If you own two compatible
VCRs, test them to see if the VCR1 button turns on both. If it does, then you
may want to program this VCR to respond to the VCR2 button on the remote
control.
To Set the VCR1/VCR2 Option:
In the PREFERENCES menu of the desired VCR, press 1 to select Remote Control.
Then press the VCR2 button on the remote control to change the setting.
The VCR will now only respond to the remote control’s VCR2 button. To change
the remote control setting back to VCR1, display the PREFERENCES menu, press 1,
and then press the VCR1 button on the remote control.
Note: Remember you must press VCR1 or VCR2 on the remote control—
whichever is selected in the PREFERENCES menu— before the remote
control will operate that VCR.
Chapter 2
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Auto Play
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
ON
2:00
AUTO
SLP
With Auto Play turned ON (the factory default setting), the VCR automatically
starts playback when you insert a tape with the safety tab removed.
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
To Access Auto Play:
1. In the PREFERENCES menu, press 2 repeatedly to switch between Auto
8 COMMERCIAL ADVANCEE
0 Exit
Play: ON and OFF.
The PREFERENCES menu
allows changes to be made
to a variety of different VCR
features.
•
•
Select ON if you want a tape with its safety tab removed to start playing
automatically when inserted.
Select OFF if you do not want a tape with its safety tab removed to start
playing automatically.
Auto TV/VCR
To control whether the VCR’s TV/VCR setting changes automatically to VCR-
viewing mode when turned on, use the Auto TV/VCR setting.
To Access Auto TV/VCR:
In the PREFERENCES menu, press 3 repeatedly to toggle between Auto TV/VCR:
ON and OFF.
Note: Pressing the TV•VCR button on the remote control will switch
between VCR and TV-viewing modes. When in VCR-viewing mode, VCR is
displayed on the front panel. The VCR indicator turns off when in TV-
viewing mode.
•
•
Select ON to switch VCR-viewing mode on automatically when the VCR’s
power is turned on. The VCR must be connected to the TV using the
supplied RF coaxial cable for this feature to work.
Select OFF to remain in the TV-viewing mode when the VCR is initially
turned on. Leaving Auto TV/VCR off is useful if you use A/V cables to
connect the VCR to the TV and you watch the VCR’s picture using the TV’s
Video Line Input. This way, the antenna/cable signal will not be interrupted
by the VCR.
24
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
EnergySaver
By default, the VCR automatically turns off after two hours of inactivity. This can be changed in
the PREFERENCES menu by pressing the 4 button repeatedly to change the time delay or to
disable the feature altogether.
•
•
Select OFF and the VCR will stay on until you shut it off.
Select 1:00, 2:00, or 3:00, and the VCR will turn off after one, two, or three hours of
inactivity.
Thirty seconds before automatically shutting off, the VCR displays an on-screen message
reading, The VCR will turn off in 30 seconds. Press any key to cancel. Pressing any remote
control or VCR front panel button will halt the countdown.
If you use the VCR’s tuner instead of your TV to view channels, you may want to turn off this
feature.
Front Panel Brightness (VCR Display)
You can change the brightness level of the VCR’s front panel display. In the PREFERENCES
menu, press the 5 button repeatedly to toggle between options:
•
•
•
AUTO the display brightens when the VCR is on and dims when the VCR is off.
BRIGHT the display is bright whether the VCR is on or off.
DIM the display is dimmed whether the VCR is on or off.
Tape Speeds
You can choose as the preferred recording speed either Standard Play (SP) or
Super Long Play (SLP). The speed selected appears in the VCR’s front display
panel and in timer and VCR Plus+ system recording menus.
Recording Speeds
SP (Standard Play)
Gives the best quality recording,
but fewer programs can be
recorded on the tape.
To Select a Preferred Tape Speed:
•
In the PREFERENCES menu, press the 6 button repeatedly to switch between
SP and SLP settings.
SLP (Super Long Play)
Gives three times the recording
time of tapes recorded in SP
mode.
Note: For an explanation of recording speeds, see the note to the left.
To Override the Preferred Tape Speed:
Recording Times
•
•
Press the SPEED button on the remote control.
Cassette
T-120
SP
SLP
Set the tape speed in the timer or VCR Plus+ system recording menus.
2 Hr
6 Hr
When you turn off the VCR, the tape speed reverts to the one selected as the
default.
T-160
2 Hr/40 Min 8 Hr
Chapter 2
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using On-Screen Menus
Set Auto Repeat
A tape can be set to play the same segment over and over in a repeating loop
with the Set Auto Repeat feature. Set Auto Repeat uses the VCR’s memory
counter to determine the duration of the loop.
In the PREFERENCES menu, press the 7 button to choose Set Auto Repeat. The
SET AUTO REPEAT menu will ask for an ending time for the loop to be
specified:
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
•
•
•
The CLEAR button will erase all three numbers entered and move the cursor
back to the first position (hours).
Loop from 0:00 to 2:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
The Press CLEAR to turn off message will appear only after the first number
has been entered into the end time.
Auto Repeat is set back to -:-- by resetting the dialog box, ejecting a tape,
powering off the VCR, power interruption, or by recording start.
When a duration time has been set:
•
•
•
The VCR will automatically switch to rewind if the counter meets or goes
past the set Auto Repeat duration.
The VCR will automatically switch to playback during rewind if the counter
equals or is less than 0:00.
The Auto Repeat may be adjusted by setting the counter to 00:00. This can
be done by pressing the CLEAR button while the tape counter is on screen
or on the front panel display.
• The counter will not reset while rewinding in an Auto Repeat loop.
26
Chapter 2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Using the
Remote Control
Chapter Overview:
• Buttons on the Remote Control
• Programming the Remote Control
• Operating Other Components
Changing Entertainment. Again.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Remote Control Buttons
Your backlit remote control has a light button (
) that glows in the dark.
Press this button to light up several key buttons. These buttons remain lit when
pressed within a few seconds of each other, or will go dark if no buttons are
pressed within seven seconds in order to conserve battery power.
ON • OFF
VCR1
TV
The VCR’s remote control is capable of controlling more than just your VCR. If
you have a compatible RCA, GE, or Proscan component, you may be able to
operate it without programming the remote control.
DVD VCR2 AUX SAT
CABLE
•
SEARCH
MUTE
You can also operate manjy brands of remotew controllable devices such as
other VCRs, TVs, Satellite or Cable Boxes, etc. Just follow the directions for
programming the remote control starting on page 30.
CH +
CH -
Component Buttons
SPEED
GUIDE
GO BACK
INFO
Note: Component buttons determine which device the remote control is set
to operate. If the VCR1 button was the last component button pressed,
then the remote control will operate the VCR. You will press the TV button
to control TV functions, the DVD button to control a DVD player, etc.
OK
AUX Turns on a compatible RCA, GE, or Proscan amplifier/receiver or
audio/video receiver. This button can be programmed to control an
RCA, GE, or Proscan auxiliary component.
MENU
CLEAR
3
6
9
1
4
7
2
5
8
0
DVD Controls a compatible RCA, GE, or Proscan DVD player. Use the
arrow and OK buttons to move around and select items in the DVD
player’s menu system.
ON•OFF Turns the VCR on or off when the remote control is set to
operate the VCR. Also turns other compatible components on or off.
INPUT
ANTENNA
SAT•CABLE Turns on a compatible RCA, GE, or Proscan satellite
receiver and can be programmed to operate different brands of
receivers.
REVERSE
PLAY
STOP
FORWARD
RECORD
PAUSE
TV Turns on a compatible RCA, GE, or Proscan TV and puts the
remote control in TV-operating mode. Also used with the ON•OFF
button to turn on a different brand of TV (if programmed).
- TRACKING +
FR.ADV
EDIT
VCR1 Turns on a compatible RCA, GE, or Proscan VCR and sets the
remote control the VCR-operating mode.
VCR2 Turns on a compatible RCA, GE, or Proscan VCR and sets the
remote control to secondary VCR-operating mode. This button can also
be programmed to operate a compatible RCA, GE, or Proscan Laserdisc
player.
28
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
VCR Function Buttons
ANTENNA Toggles the picture signal between the VCR’s receiver and the standard
antenna/cable system. The VCR indicator in the front panel display turns on when
viewing the VCR receiver’s image.
Arrow Buttons (
)
Moves the on-screen menu highlight, and enters data such as
letters or numbers in certain menus.
CH + and – Selects next higher or lower channel in the VCR’s channel list.
CLEAR Resets the time counter to 0:00:00. Also clears on-screen menu item entries
when setting the time and date or timer recordings.
EDIT Simultaneously pauses and unpauses two connected VCRs when copying a
tape from one VCR to another.
FORWARD Fast forwards the tape when the VCR is stop in stop mode. This button
also searches forward if pressed during playback. During play-pause mode, this
button starts slow-motion advance and each press of the button during slow-motion
advance increases the speed incrementally.
FR. ADV (Frame Advance) Advances a tape one frame at a time during play-
pause mode.
GO BACK Switches between the current and previous channels.
INFO Shows the status displays on screen of the VCR, TV, DVD player, etc.
(whichever component is set as the remote control’s active device).
INPUT Selects between the Video Line Inputs and the VCR’s tuner. Video Line Input
refers to the signal coming from the component connected to audio/video input jacks
on the back or front of the VCR (L1 designates the back panel A/V jacks and L2
designates the front panel A/V jacks).
MENU Displays the VCR’s on-screen menu system.
Number buttons (0 through 9) Selects channels up to 99 by pressing two number
buttons. Selects 3-digit channels by pressing and holding 1 until 1 – – appears on
screen. Then press the other two numbers.
OK In on-screen menus, this button acts as an Enter button (used in conjunction
with the remote control’s arrow buttons). This button selects the highlighted on-
screen menu choice.
ON•OFF When the remote control is set to operate the VCR, this button turns on or
off the unit’s power. To be in VCR-control mode, press the proper component button
on the remote control first (either VCR1 or VCR2).
PAUSE Pauses playback or recording modes. Press PAUSE again to return to active
playback or recording.
PLAY Plays a tape.
RECORD Starts record mode on tapes with the safety tab intact. Pressed repeatedly
to set a recording duration for the Express Recording feature.
REVERSE Rewinds the tape when the VCR is in stop mode. Searches backward
through a tape during playback mode. Starts slow motion playback during play-
pause mode with each press of the button decreasing the slow-motion speed.
Chapter 3
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
SEARCH Displays the MOVIE ADVANCE screen for prerecorded movies. When
pressed repeatedly, this button also displays Index and Zero Search menus on screen.
During playback mode, pressing SEARCH starts COMMERCIAL ADVANCE skipping.
SPEED Overrides the default recording speed (either SP or SLP).
STOP Stops the current VCR function (record, playback, rewind, etc).
TRACKING – and + Allows for manual reduction of streaks that may appear in the
picture during playback mode. Reduces picture “jitter” during play-pause mode.
TV Function Buttons
CH + and – Selects next higher or lower channel in the VCR’s channel list.
CLEAR Removes menus or status displays from the TV screen.
GO BACK Switches between the current and previous channels.
GUIDE Displays channel guide on some RCA, GE, and Proscan TV’s.
INFO Shows the TV’s status displays on screen.
MUTE Reduces the TV’s volume to a minimum level.
Number buttons (0 through 9) Selects channels up to 99 by pressing two number
buttons. Selects 3-digit channels by pressing and holding 1 until 1 – – appears on
screen. Then press the other two numbers.
ON•OFF Turns the TV on and off if the remote control’s TV button has been pressed
first.
VOL < and > Raises and lowers your television’s volume.
Using the INPUT Button
Use the INPUT button to toggle through the available Video Line Input sources (L1, L2) and
regular broadcast signals. Video Line Input allows you to view the image from an external
device (like a camcorder) connected to the VCR using A/V jacks and cables.
1. Press the remote control’s VCR1 or VCR2 button (whichever is set to operate your VCR) to
enter VCR-operating mode. Make sure that the VCR is turned ON.
2. Press the remote control’s INPUT button to tune to the Video Line Input source (L1
designates the rear A/V jacks and L2 the front A/V jacks).
3. To tune back to the broadcast signal you were previously watching through the VCR, press
the INPUT button again.
30
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Operating a TV with the VCR’s Remote Control
The remote control that came with your VCR can be programmed to operate most brands of
remote-controllable TVs, VCRs, satellite receivers, cable boxes, and DVD Players. This remote
control should already control most RCA, GE, and Proscan TVs without any programming.
Do You Need to Program the Remote Control?
To determine whether the remote control needs to be programmed to operate your TV, turn the
TV on, point the VCR’s remote control at it, then press the remote control’s TV button (this puts
the remote control into TV-operating mode and should automatically turn off most RCA, GE,
and Proscan TVs). Press the remote control’s ON•OFF button to see if the TV responds to the
command. If not, the remote control needs to be programmed to operate that model TV.
Programming the Remote Control
To program your remote control, you must use the TV Codes list on the next page. Look up the
brand name of your TV and the code(s) that brand uses.
Notes: This remote control may not operate all models of the brands shown in the code list.
Note the difference between the TV and VCR on-screen displays to know which component
the remote control is operating.
1. Turn on the TV.
2. Find your TV brand and code number(s) in the code list on the next page.
3. Press and hold the TV button on the remote control.
4. Enter the code number from the code list using the remote control’s number buttons.
5. Release the TV button, then press the CHAN up or down button.
•
•
If the TV responds to the remote control’s command, the remote is programmed.
If the TV does not respond to the command, repeat these steps using the next code
listed for your TV’s brand.
Operating the TV
After you set up the remote control, see which buttons operate your TV:
1. Point the remote control at the TV, and press the TV button. If the TV does not turn on/off,
press the TV button and then press the ON •OFF button.
2. You may want to experiment to see which buttons operate your TV. Try pressing buttons,
such as VOL and MUTE. See the button descriptions in this chapter for details about what
each remote control button does.
Chapter 3
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
Midland ..................................... 1054, 1151, 1171, 1172, 1181
Archer .................................................. 5008, 5009, 5010, 5011
Cabletenna ........................................................................... 5008
Cableview ............................................................................. 5008
Century ................................................................................ 5011
Citizen ................................................................................... 5011
ColourVoice ............................................................. 5012, 5013
Comtronics ............................................................... 5014, 5015
Contec .................................................................................. 5016
Eastern .................................................................................. 5017
Garrard ................................................................................. 5011
GC Electronics .................................................................... 5009
Gemini ............................................................ 5018, 5019, 5049
General Instrument ........................................................... 5003
Hamlin ....................................... 5020, 5021, 5022, 5035, 5045
Hitachi ................................................................................... 5003
Hytex..................................................................................... 5002
Jasco ...................................................................................... 5011
Jerrold ....... 5003, 5005, 5007,5018, 5023, 5024, 5046, 5053
Magnavox .............................................................................. 5025
Memorex .............................................................................. 5026
Movie Time .................................................... 5002, 5027, 5028
NSC ................................................................. 5002, 5027, 5028
Oak ................................................................... 5002,5016, 5029
Panasonic ................................................................... 5048, 5052
Paragon ................................................................................. 5026
Philips ....... 5011, 5012, 5013, 5019, 5025, 5030, 5031, 5032
Pioneer....................................................................... 5033, 5034
Pulsar ..................................................................................... 5026
RCA ................................................................. 5047, 5049, 5052
Realistic ...................................................................... 5009, 5049
Regal ........................................................................... 5022, 5035
Regency ................................................................................ 5017
Rembrandt ........................................................................... 5003
Runco .................................................................................... 5026
Samsung ..................................................................... 5014, 5034
Scientific Atlanta................................. 5006, 5036, 5037, 5038
Signal........................................................................... 5014, 5018
Signature ............................................................................... 5003
SL Marx ................................................................................. 5014
Sprucer ................................................................................. 5052
Starcom........................................................... 5007, 5018, 5053
Stargate ...................................................................... 5014, 5018
Starquest............................................................................... 5018
Tandy ..................................................................................... 5040
Teleview ................................................................................ 5014
Tocom ............................................................. 5004, 5023, 5041
Toshiba .................................................................................. 5026
Tusa ........................................................................................ 5018
TV86 ...................................................................................... 5027
Unika ............................................................... 5008, 5009, 5011
United Artists ...................................................................... 5002
United Cable ....................................................................... 5053
Universal .............................................. 5008, 5009, 5010, 5011
Videoway .............................................................................. 5044
Viewstar ............................................... 5015, 5025, 5027, 5040
Zenith .............................................................. 5026, 5050, 5051
TV
Minutz ................................................................................... 1052
Mitsubishi ..................... 1004, 1005, 1006, 1019, 1022, 1051,
1079, 1080, 1081, 1082, 1082, 1125
ABEX ..................................................................................... 1172
Admiral ...................................................................... 1001, 1173
Adventura............................................................................. 1174
Aiko ....................................................................................... 1016
Alleron .................................................................................. 1046
Amtron ................................................................................. 1038
Akai ........................................................................................ 1002
Anam National ......................................................... 1003, 1038
AOC ............................... 1004, 1005, 1006, 1007, 1175, 1176
Audiovox .............................................................................. 1038
Belcor .................................................................................... 1004
Bell & Howell................................................. 1001, 1083, 1162
Bradford................................................................................ 1038
Brokwood ............................................................................ 1004
Candle .................................................. 1004, 1006, 1008, 1174
Capehart............................................................................... 1175
Celebrity ............................................................................... 1002
Centurio ............................................................................... 1009
Citizen ................................................. 1004, 1006, 1008, 1016,
1038, 1105, 1171, 1174, 1177
Clairton ................................................................................ 1176
Colortyme ................................................................ 1004, 1006
Concerto ................................................................... 1004, 1006
Contec/Cony ........................... 1012, 1013, 1014, 1038, 1176
Craig ...................................................................................... 1038
Crown ........................................................................ 1038, 1171
Curtis-Mathes .............................................. 1000, 1004, 1006,
1015, 1105, 1162, 1171
MontgomeryWard ............................................................. 1083
Motorola.................................................................... 1003, 1173
MTC ............................... 1004, 1005, 1006, 1105, 1176, 1178
Multitech ................................................................... 1038, 1178
Multivision ............................................................................ 1084
NAD ..................................................... 1006, 1071, 1072, 1185
NEC ........................................... 1003, 1004, 1005, 1006, 1089
NIKKO ....................................................................... 1006, 1016
NTC ...................................................................................... 1016
Onwa..................................................................................... 1038
Optimus ................................................................................ 1185
Optonica.................................................................... 1095, 1173
Orion ......................................................................... 1035, 1191
Panasonic ............................................. 1003, 1054, 1062, 1170
Philco .................. 1003, 1004, 1005, 1006, 1008, 1012, 1019,
1062, 1068, 1069,1074, 1075, 1077, 1183, 1184
Philips .......1003, 1004, 1008, 1012, 1019, 1062, 1068, 1069,
1074, 1075, 1076, 1086, 1087, 1088, 089
Pilot ............................................................................ 1004, 1171
Pioneer................ 1004, 1006, 1090, 1091, 1092, 1179, 1185
Portland .................................... 1004, 1005, 1006, 1016, 1171
Price Club ............................................................................ 1105
Prism ..................................................................................... 1054
ProScan ...................................................................... 1000, 1181
Proton ....................................... 1004, 1006, 1012, 1093, 1175
Pulsar ..................................................................................... 1151
Pulser .................................................................................... 1004
Quasar ................................................. 1003, 1054, 1070, 1094
Radio Shack/Realistic ............. 1000, 1004, 1006, 1012,1038,
1049, 1095, 1162, 1171, 1172
CXC ...................................................................................... 1038
Daewoo ......................................................... 1004, 1005, 1006,
1016, 1017, 1018, 1127, 1171
Daytron ........................................................... 1004, 1006, 1171
Dimensia ............................................................................... 1000
Dumont ..................................................................... 1004, 1151
Dynatech .............................................................................. 1178
Electronband............................................................. 1002, 1176
Electrohome ............................ 1003, 1004, 1006, 1019, 1022
Emerson ............ 1004, 1006, 1012, 1014, 1023, 1024, 1025,
1026, 1027, 1028, 1029,1030, 1031, 1032, 1033,
RCA .................... 1000, 1003, 1004, 1005, 1006, 1007, 1019,
1096, 1098, 1099, 1100, 1101,1102, 1103,
1129, 1179, 1181, 1187, 1188, 1190
Rhapsody .............................................................................. 1176
Runco .................................................................................... 1151
Sampo ....................................... 1004, 1006, 1171, 1172, 1175
Samsung .............................................. 1004, 1005, 1006, 1012,
1015, 1019, 1104, 1105, 1106, 1171, 1172
1034, 1035, 1036, 1037, 1038, 1039, 1041, 1042,
1043, 1044, 1046, 1047, 1123, 1124, 1162, 1171,
Samsux .................................................................................. 1171
Sansui .................................................................................... 1191
Sanyo ................................................... 1004, 1048, 1049, 1050,
1080, 1107, 1108, 1162, 1169, 1180
Scotch ................................................................................... 1006
Scott .................... 1004, 1006, 1012, 1024, 1035, 1038, 1046
Sears .................. 1000, 1004, 1006, 1013, 1019, 1046, 1048,
1049, 1050, 1051, 1066, 1071, 1072, 1109,
1110, 1162, 1180, 1181, 1189
Sharp ................... 1004, 1006, 1012, 1029,1095, 1111, 1112,
1113, 1122, 1171, 1173
Shogun .................................................................................. 1004
Signature ......................................................... 1001, 1083, 1115
Simpson ................................................................................ 1008
Sonic ...................................................................................... 1176
Sony ....................................................................................... 1002
Soundesign ............................... 1004, 1006, 1008, 1038, 1046
Squareview ........................................................................... 1189
SSS............................................................................... 1004, 1038
Starlite ................................................................................... 1038
Supre-macy .......................................................................... 1174
Supreme................................................................................ 1002
Sylvania..... 1004, 1006, 1008, 1019, 1062, 1068, 1069, 1074,
1075, 1076, 1077, 1088, 1116, 1161, 1183, 1184
Symphonic ...................................................... 1033, 1038, 1189
Tandy ..................................................................................... 1173
Tatung ......................................................................... 1003, 1178
Technics ................................................................................ 1054
Techwood ....................................................... 1004, 1006, 1054
Teknika ............... 1004, 1005, 1006, 1008, 1012, 1013, 1016,
1038, 1046, 1076, 1082, 1083, 1105, 1170, 1171
Telecaption ........................................................................... 1117
TMK............................................................................ 1004, 1006
Toshiba ............... 1049, 1071, 1072, 1089, 1105, 1109, 1117,
1118, 1160, 1162
1176, 1177, 1179, 1191
Envision ...................................................................... 1004, 1006
Fisher .............................. 1048, 1049, 1050, 1051, 1162, 1180
Fujitso.................................................................................... 1046
Funai ........................................................................... 1038, 1046
Futuretec .............................................................................. 1038
GE ...................... 1000, 1003, 1004, 1006, 1022, 1052, 1054,
1055, 1087, 1164, 1165, 1166, 1167, 1168, 1181
Gibralter .................................................................... 1004, 1151
Goldstar............................................... 1004, 1005, 1006, 1012
1019, 1056, 1057, 1058, 1155, 1156, 1171, 1172
Grundy ............................................................ 1038, 1046, 1171
Hallmark .................................................................... 1004, 1006
Harvard ................................................................................. 1038
Hitachi ............................ 1004, 1006, 1012, 1013,1059, 1060,
1061, 1135, 1136, 1137, 1138, 11391140, 1141,
Satellite Antenna Receiver
Chapparal .................................................................. 5056, 5057
Drake ......................................................................... 5058, 5059
GE ............................................................................... 5000, 5001
General Instuments...................................... 5060, 5061, 5062
Panasonic .............................................................................. 5075
Primestar .............................................................................. 5076
Proscan ...................................................................... 5000, 5001
RCA ............................................................................ 5000, 5001
Realistic ................................................................................. 5063
Sony ....................................................................................... 5072
STS1 ....................................................................................... 5064
STS2 ....................................................................................... 5065
STS3 ....................................................................................... 5066
STS4 ....................................................................................... 5067
Toshiba ....................................................................... 5068, 5073
Uniden SAT .......................................................................... 5069
1142, 1143, 1144, 1145, 1146, 1148, 1150, 1179
IMA ........................................................................................ 1038
Infinity ................................................................................... 1062
Janeil ...................................................................................... 1174
JBL .......................................................................................... 1062
JCB ......................................................................................... 1002
JC Penney .......... 1000, 1004, 1005, 1006, 1008, 1022, 1052,
1054, 1058, 1063, 1064, 1072, 1087, 1105,
1128, 1171,1172,1181
Jensen ......................................................................... 1004, 1006
JVC ....................................................... 1012, 1013, 1054, 1060,
................... 1065, 1066, 1067, 1089, 1157, 1158, 1159, 1182
Kawasho ......................................................... 1002, 1004, 1006
Kaypani.................................................................................. 1175
Kenwood ........................................................ 1004, 1006, 1019
Kloss Novabeam ................................ 1068, 1069, 1174, 1183
KTV ........................................... 1038, 1070, 1171, 1176, 1177
Loewe.................................................................................... 1062
Logik ...................................................................................... 1083
Luxman ...................................................................... 1004, 1006
LXI .................................................................. 1000, 1006, 1049,
1062, 1071, 1072, 1073, 1162, 1181
Auxiliary
Totevision ............................................................................. 1171
UniversalL ................................................................. 1052, 1087
Victor ......................................................................... 1066, 1182
Vidtech ............................................................ 1004, 1005, 1006
Viking ..................................................................................... 1174
Wards ................. 1000, 1001, 1004, 1005, 1006, 1019, 1024,
1033, 1046, 1052, 1062, 1068, 1069, 1074, 1075,
1076, 1083, 1087, 1088, 1095, 1119, 1120, 1184
Yamaha ................................................. 1004, 1005, 1006, 1019
Zenith ........................................ 1004, 1151, 1152, 1153, 1154
(For some RCA, GE, Proscan and Dimensia brands only)
AM/FM .................................................................................. 0003
Auxiliary Component ........................................................ 0004
CD ......................................................................................... 0007
SAT1 ...................................................................................... 0008
SAT2 ...................................................................................... 0011
DVD ...................................................................................... 0010
Phono .................................................................................... 0005
Megatron ................................................................... 1006, 1059
Magnavox ........... 1004, 1006, 1008, 1019, 1062, 1068, 1069,
1074, 1075, 1076, 1077, 1088, 1089, 1130,
1131, 1132, 1133, 1134, 1183, 1184
Majestic ................................................................................. 1083
Marants ................................................................................. 1062
Marantz ................................................ 1004, 1006, 1062, 1078
MEI ......................................................................................... 1176
Memorex .................................. 1001, 1006, 1082, 1083, 1162
MGA ................... 1004, 1005, 1006, 1019, 1022, 1051, 1079,
1080, 1082
Cable Box
ABC ..................... 5002, 5003, 5004, 5005, 5006, 5007, 5053
Antronix .................................................................... 5008, 5009
32
Chapter 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Using the VCR’s Features
Chapter Overview:
• Recording
• Express Recording (XPR)
• Timer Recordings
• Using the VCR Plus+ System
• Copying and Editing Tapes
Changing Entertainment. Again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Recording Features
Your VCR provides many ways to capture programming:
1. Recording Press one button to record a program from the current VCR channel.
2. Express Recording (XPR) Allows recording to start while a program is being watched.
This feature automatically stops recording after a designated period of time.
3. Timer Recording Program the VCR for a daily, weekly, or one-time recording which will
automatically start and stop at the times you set.
4. Timer Recording with the VCR Plus+® System Program the VCR by entering a
PlusCode® programming number found in most TV program listings.
Express Recording (XPR)
Use XPR to quickly record the remaining portion of a program being watched. XPR is a great
way to capture the end of a sporting event that has run into overtime or a live broadcast that
runs long.
XPR works in 30-minute increments. You can capture the last 30, 60, 90, etc. minutes of
programming (depending on tape length), up to four hours total.
To Activate XPR:
Rec
Ch 36
Record Length 0:00
1. If necessary, turn on the VCR and tune it to the channel with the desired
programming.
2. If necessary, insert a tape with its safety tab in place into the VCR. Make
sure the tape is cued to record at the proper starting point.
Rec
Ch 36
Record Length 1:30
Note: To override the set recording speed, press the remote control’s SPEED
button repeatedly to toggle between SP and SLP choices.
Pr
3. Press the RECORD button on the remote control (REC on the VCR front
panel) to start record mode.
Press REC to set length
4. Repeatedly press the RECORD button to set up the recording duration.
•
•
•
Each press of the RECORD button adds 30 minutes of recording time.
The VCR automatically turns off after recording for the set duration.
To stop an XPR recording, press and hold the STOP button on the
remote control or VCR front panel for several seconds until STOP
appears on the VCR on-screen display.
VCR Plus+ and PlusCode are registered trademarks of the Gemstar Development Corporation.
The VCR Plus+ system is manufactured under the license from Gemstar Development Corporation.
34
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Timer Recording
You can program up to eight different broadcasts to be recorded.
Notes– In order for a timer recording to work:
•
•
The VCR’s clock must be set correctly.
Insert a tape with its safety tab in place and enough tape to record
the program.
TIMER RECORDINGS
•
If you’ve set up the VCR with a cable box for all channels, the output of
your cable box appears in the channel item of the Timer Recording
menu.
1 Create a New Program
2 Review Existing Progs.
3 Use VCR Plus+ Code
•
•
PROGRAMS OVERLAP appears if two programs whose times overlap
are entered.
appears in the display when you turn off the VCR and a timer
How often should this
program record?
0
recording has been set.
flashes if there is no tape in the VCR when
a timer recording has been set and the unit is turned off.
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
•
For a cable box or satellite receiver, turn it on and tune it to the
channel you want to record before the recording is to begin.
To Set Up to as Many as Eight Timer Recording Programs:
1. Press the MENU button to display the VCR MAIN MENU.
2. Press the 2 button to choose TIMER RECORDINGS.
3. Press the 1 button to choose Create a New Program.
4. Select how often you want the program to record.
5. Enter the data for the program with the number buttons.
Program 1 has been saved
0
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
Data entered includes the channel number (if using A/V jacks to connect the
VCR to the TV, press INPUT to select the Video Line Input), and start and end
times (including AM or PM). The start date is automatically entered based on
the VCR clock. Both the recording date and speed can be changed.
6. Review the information to make sure it is correct.
7. Press the MENU button to save.
Stopping a Timer Recording
To stop or Cancel a Timer Recording in Progress (Even an Express
Recording):
Press and hold the STOP button for several seconds until STOP appears in the
on-screen display.
Program 1 (One time)
Reviewing and Clearing Programs
To review programs that you have already set up:
Channel
Start Time 12:00 AM
End Time 01:30 AM
Start Date 11/16/01 Fri
Tape Speed SLP
Press INFO to edit
Press CLEAR to erase
Press MENU for next prog
104 Cable
1. Press the MENU button to display the VCR Main Menu.
2. Press the 2 button to choose TIMER RECORDINGS.
3. Press the 2 button to choose Review Existing Progs.
4. Press INFO to edit, CLEAR to erase, or MENU to see the next saved timer
recording program.
Chapter 4
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
VCR Plus+ GOLD Programming System
The VCR Plus+ GOLD programming system makes timer recordings easier by automatically
setting and updating the clock and channel list for you. During the one-time QuickSet Guide
setup, the VCR prompts you to enter your zip code. Soon after, the VCR clock will set itself and
overnight, your VCR Plus+ programming system channel list should be input for you.
Time, date, and VCR Plus+ system information are downloaded from participating TV stations
over your antenna or cable system. The time and date are updated each time the VCR is turned
off (and after every power interruption). So, when your TV stations or cable company update
channel lineups, your VCR will get the most current channel list automatically, freeing you from
having to manually change the channel list.
If your VCR Plus+ GOLD system fails to download the proper information for any reason, you
can always manually map the channels. If you keep getting prompts about multiple cable
services in your area, you can turn off AUTO VCR Plus+ download by choosing 2 in the VCR
Plus+ SETUP menu.
To Turn Off the Automatic VCR Plus+ Download:
1. Press the MENU button on the remote control to display the VCR MAIN
MENU.
2. Press 4 to select CHANNELS.
3. Press 4 to select VCR Plus+ Setup.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
4 VCR Plus+ Setup
5 Cable Box Setup
6 SAT Setup
CABLE
0 Exit
4. Pressing 1 will take you to a screen to manually map VCR Plus+ system
VCR PLUS+ SETUP
channels. Pressing 2 will toggle between Auto VCR Plus+: ON and OFF.
1 Set channel lists
2 Auto VCR Plus+:
Make sure this feature is turned off if you continually get fail to download
ON
prompts and map the channels manually.
VCR Plus+ data was not
found.
0 Exit
36
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Mapping VCR Plus+ System Channels Manually
Using the VCR Plus+ GOLD programming system can make setting up timer recordings for cable or
standard TV easier. If your VCR Plus+ GOLD system setup failed during the interactive Setup, then
you will see a prompt on the screen.
If the automatic download continuously fails, you will need to map the channels for
VCR PLUS+ SETUP
your local service manually. A worksheet and abbreviated codes for typical cable
services in the U.S. and Canada are provided on the following pages.
Last automatic setup
was unsuccessful.
Would you like to:
1 Try again
2 Finish setup manually
3 Cancel the auto setup
To Manually Map VCR Plus+ System Channels:
1. Press the MENU button to display the VCR MAIN MENU.
2. Press the 4 button to choose CHANNELS.
3. Press the 4 button to choose VCR Plus+ Setup.
4. Press 1 to display the Set channel lists menu.
VCR PLUS+ SETUP
1 Set channel lists
2 Auto VCR Plus+:
ON
VCR Plus+ data was not
found.
0 Exit
5. Enter the data following the on-screen directions using
your worksheet.
VCR+ Channel My Channel
5
4
--
--
3 -> -> -> --
2
1
--
--
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR+ Channel My Channel
5
4
46
--
3 -> -> -> 23
2
1
--
--
Use CH+/- to select
Press 0-9 to change
Press MENU to save
(Screen shown is only an example.)
Chapter 4
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
VCR Plus+ Cable TV Codes
Two-Digit VCR Plus+ System
Two-Digit VCR Plus+ System
Channel Numbers for
Channel Numbers for
Cable TV (USA List)
Cable TV (Canadian List)
35 ................... American Movie Classics
39 ........................ Arts &-Entertainment
57 ......................... Black Entertainment
54 .................................................. Bravo
42 ......................... Cable News Network
45 .............................................Cinemax
98 ..........................................Cinemax 2
37 .....................The Discovery Channel
53 ..........................The Disney Channel
63 ..................Entertainment Television
34 ........................ESPN Sports Network
47 ..........................The Family Channel
33 .............................. Home Box Office
95 ........................... Home Box Office 2
96 ........................... Home Box Office 3
51 ..................... The Learning Channel
46 ..............................................Lifetime
58 ...........................The Movie Channel
48 ................................ Music Television
49 ......................The Nashville Network
38 ...................................... Nickelodeon
64 ...........................Nostalgia Television
99 ........................... Quality Value Cable
41 ........................................... Showtime
97 ........................................ Showtime 2
59 .................................. Sports Channel
52 ............... Turner Network Television
44 ..................................... USA-Network
62 ....................................... Video Hits 1
93 .............................. Viewer’s Choice 1
94 .............................. Viewer’s Choice 2
55 .................................... WGN Chicago
43 .................................... WTBS Atlanta
60 .............................. WWOR-New York
67 .................. Allarcom Pay Television/
Superchannel
44 ........................Arts & Entertainment
72 ........................ Cable News Network-
Headline News
61 ......................... Cable News Network
70 ............... Canadian Home Shopping
Network
56 ..................................... Canal Famille
69 ......................... Cathay International
Television Inc.
68 ................. Chinavision Canada Corp
60 ..................Country Music Television
63 ................................. Family Channel
62 ........................................First Choice
96 ................................ First Choice Two
97 ............................ First Choice Three
99 ...............................First Choice Four
90 .......................... House of Commons
91 .......................... La Chaine Francaise
51 ..................... The Learning Channel
65 ............... MeteoMedia/The Weather
Network
48 ......................... MuchMusic Network
55 .......................................MusiquePlus
52 ............................. Nashville Network
73 ................................ Newsworld/CBC
53 .........................Le Reseau des Sports
43 .......................... The Sports Network
64 ....................................... Super Ecran
37 ....................................Super Ecran B
98 ................................... Super Ecran C
66 ............................... Telatino Network
46 .................................... TV5 Montreal
92 .............................. Viewer’s Choice 1
93 .............................. Viewer’s Choice 2
94 .............................. Viewer’s Choice 3
95 .............................. Viewer’s Choice 4
71 .......................... Vision TV: Canada’s
Faith Network
38 ...................... Youth TV, Canada Inc.
Note: Refer to your local TV program listings for a complete VCR Plus+ channel list for your
viewing area or contact your cable company. Using the list may save you some time.
38
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
VCR Plus+ System Worksheet
Broadcast or
Cable-TV
Station Name
Channel Number
You Receive the
Station On*
VCR Plus+ System
Channel Number**
HBO
33
34
ESPN
*Check your local or cable listings for the channel number you receive this station on.
**Check your local listings for broadcast or VCR Plus+ channel number assigned.
Chapter 4
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Recording Broadcast Stereo TV or SAP
(Second Audio Program)
Some TV programs are broadcast with stereo audio or SAP (Second Audio Program). For details
about turning on broadcast stereo or SAP, see page 48.
1. Turn on the TV and tune it to the VCR viewing channel (either 3, 4, or the TV’s Video Line
Input).
2. Insert a tape with its safety tab in place.
3. If your VCR viewing channel is 3 or 4, make sure the VCR indicator appears in the front
display. If not, press the TV•VCR button on the remote control to turn it on.
4. Press the SPEED button on the remote control if you want to override the preferred tape
speed setting. The tape speed indicator appears on the TV screen.
5. Select the channel or Video Line Input to be recorded.
6. Set the Reception: STEREO/MONO/SAP feature for the type of audio you want to record.
7. Press RECORD to start recording.
8. Press STOP when finished.
Copying and Editing Tapes Using Two VCRs
Use one VCR as the playback VCR and the other as the recording VCR.
CABLE BOX or ANTENNA
IN
OUT
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel (either 3, 4, or the TV’s Video
PLAYBACK
VCR
Line Input).
3. If you connected your VCR using coaxial cables, tune the recording VCR to
channel 3 or 4—whichever is selected on the back of the VCR.
AUDIO
OUT IN
ANT. IN
RF OUT
R
L
If you have connected the VCR using A/V jacks and cables, press INPUT on
the recording VCR’s remote control to select the Video Line Input. Select L1
for the jacks on the back of the VCR or L2 for the jacks on the front.
CH
3
4
VIDEO
RECORDING
VCR
4. Insert the tape you want copied into the playback VCR. Insert a tape with
its safety tab in place into the recording VCR.
5. Press PLAY on the playback VCR to begin playback. When you reach the
point on the tape or program where you want to begin copying, press the
PAUSE button. You may need to adjust the tracking.
AUDIO
ANT. IN
RF OUT
OUT
IN
R
L
CH
3
4
VIDEO
6. Press the RECORD button, then press PAUSE on the recording VCR.
7. Press the PAUSE buttons on both VCRs at the same time to begin copying
TO TV
the tape.
8. To edit segments that you do not want to copy:
Caution:
The unauthorized recording of
satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
•
•
Press PAUSE on recording VCR to pause copying.
Locate the next segment you want to copy on the playback VCR by
using FWD, REV, and PLAY, and then press PAUSE.
•
Press PAUSE on both VCRs at the same time to resume copying.
9. Press STOP on both VCRs when finished.
40
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Picture Search Options
The basic way to search during playback is using the remote control’s FORWARD or REVERSE
buttons (FWD and REV on the VCR front display panel). This section contains several other
options available for searching a tape.
Insert Tape:
Forward and Reverse Search
You can search a tape during playback either forward or reverse in direction.
Don’t forget to insert a recorded
tape when using the search
features.
Note: Sound is turned off during picture search.
1. Press the FORWARD button to search forward or the REVERSE button to
search backwards.
2. Press the FORWARD, REVERSE, or PLAY button to return to normal
playback.
Slow Motion
You can view a tape during play or play-pause mode using Slow Motion search.
1. In pause mode, press the FORWARD (FWD) or REVERSE (REV) button to
start slow-motion playback.
2. Press the FORWARD button to increase or the REVERSE button to decrease
the search speed.
3. Use the TRACKING + or – buttons to remove any streaks from the picture.
4. Press the PLAY button to return to normal playback.
The VCR switches automatically from slow-motion playback to stop mode
after a few uninterrupted minutes.
Frame Advance
Frame Advance lets you view single-frame action during playback.
1. While playback is in progress, press the remote control’s PAUSE button
(PLAY/PAUSE on the VCR) to freeze the action.
2. Press the F. ADV button on the remote control each time you want to view
the next frame of the recording.
3. Press the PAUSE or PLAY button on the remote control (PLAY/PAUSE on the
VCR) to return to normal playback.
Chapter 4
41
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Index Search
The VCR has a VHS Index Search System that automatically records index marks on the tape
every time you start a recording. During playback you can locate the program you want to play
by the number of index marks or by scanning. The VCR will search forward or reverse from the
location you are at on the tape.
To Activate Index Search:
1. While in playback mode, press the STOP button to halt the action.
2. Press the SEARCH button on the remote control to display the INDEX
INDEX SEARCH
SEARCH screen on the TV screen.
Press REV or FWD
to begin scanning
OR
enter a specific
index number
--
Press SEARCH to exit
3. If you want to search through a certain number of index marks, press two
number buttons to enter the number of marks you want to search. Press the
CLEAR button on the remote control to correct an entry.
4. Press the FORWARD button to search forward or the REVERSE button to
search in reverse. The VCR will locate your index mark and begin playback.
If you did not enter a specific index number, the VCR will locate the next
index mark and begin playback.
5. Press STOP to stop Index Search.
Notes– Certain index marks may be missed by the VCR including:
•
•
•
Marks too close to the current location of the tape.
Those at the beginning of a recording lasting five minutes or less.
Index marks that start at the beginning of the tape.
Go-To Search
GO-TO SEARCH
Current tape counter is
2:17:25
The Go-To Search feature enables the VCR to quickly locate a counter reading
anywhere on the tape. When the VCR locates the counter reading, it will begin
playback.
Press REV or FWD
to go to -:--:00
1. Press the STOP button.
Press SEARCH to exit
2. Repeatedly press the SEARCH button on the remote control until the
GO-TO SEARCH menu appears on the screen.
3. Use the number buttons to enter the hour and/or minute of the counter
reading to which you want the VCR to go. If necessary, press the CLEAR
button on the remote control to correct an entry.
4. Press the FORWARD button to search ahead or the REVERSE button to
search behind.
5. Press the STOP button to end a Go-To search.
42
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
COMMERCIAL ADVANCE
®
This feature uses patented technology to detect and mark most commercials on your tape for
any recording that is more than 15 minutes long. Once recording is finished, the VCR rewinds
the tape to the beginning of the recording and determines where the commercials are located. It
then marks the beginning and end of the detected commercial segments, and when finished,
returns the tape to the end of the recording. It does not erase commercials from the tape.
During playback, the VCR automatically skips the detected commercial segments, or you can
chose to manually skip them. This feature reduces three minutes of commercials to
approximately 8-12 seconds of fast forwarding in the SLP speed. You can select a background
display of blue or see the video as the commercials are skipped.
Because television signals do not indicate where commercials are located, this feature finds and
marks them through a set of formulas based on how television is broadcast today. Since
television stations broadcast differently and insert their own commercials, you may experience
some variations in this feature’s effectiveness. Station promotions, identifications, and
announcements are not considered commercials, but might be skipped. For more information,
see “Questions and Answers About COMMERCIAL ADVANCE ” in the Reference section.
1. Press MENU to display the VCR MAIN MENU.
2. Press 6 to display the PREFERENCES menu.
3. Press 8 to display the COMMERCIAL ADVANCE menu.
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
ON
3 Auto TV/VCR:
4 EnergySaver:
5 Front Panel:
6 Tape Speed:
7 Set Auto Repeat
ON
2:00
AUTO
SLP
8 COMMERCIAL ADVANCEE
0 Exit
Now you can select one of the COMMERCIAL ADVANCE features.
COMMERCIAL ADVANCE
COMMERCIAL ADVANCE Marking
Press 1 to turn commercial Marking ON or OFF.
1 Marking:
2 Playback:
3 Display:
ON
AUTO
Blue
•
Select ON, and the VCR will mark commercials within approximately 30
seconds for the following types of recording:
— Timer, Timer with VCR Plus+, or Express Recording The VCR
0 Exit
automatically marks commercials after the power is turned off.
— Recording The VCR prompts you to mark the commercials when
the recording is stopped.
The VCR is waiting to
mark commercials in the
program you recorded.
•
Select OFF and the VCR will not mark the commercials.
1 Mark them now
2 Mark them later
3 Don't mark commercials
The VCR will begin
marking in 30 seconds...
Chapter 4
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
COMMERCIAL ADVANCE Playback
Press 2 to switch between Playback: AUTO and MANUAL.
COMMERCIAL ADVANCE
1 Marking:
2 Playback:
3 Display:
ON
AUTO
Blue
•
Select AUTO to have the VCR automatically advance through the blocks of
marked commercials.
It works with most 30, 45, and 60-second commercials.
0 Exit
A commercial group starting with the first two minutes or last two minutes
of a recording will not automatically be skipped.
A commercial will not be skipped if a recording starts in the middle of a
commercial segment, one isolated commercial is shown without others, or a
commercial is longer than one minute. Press FWD on the VCR (FORWARD
on remote) to scan through the commercial.
Part of a recorded program may be skipped if the program segment is
between commercials and less than one minute or there are frequent dark
and quiet scenes.
•
Select MANUAL and the VCR won’t advance through the blocks of marked
commercials until you press SEARCH.
To Override Automatic Skipping
If part of the program you’ve recorded is passed over, you can temporarily
override the automatic skipping feature of COMMERCIAL ADVANCE.
1. While the desired portion of the program is being skipped, press the PLAY
or STOP button on the remote control or VCR front panel.
2. To view the portion of the tape that was skipped, rewind the tape back to a
position before the skipping started using the REVERSE (REV) button.
3. Press the PLAY button to start playback. The portion of the tape will no
longer be skipped.
Automatic skipping will be enabled again after the VCR detects the end of
the commercial group.
Notes: If you press SEARCH during playback of material other than
commercials, the VCR advances to the end of the next “marked”
commercial block and resumes playback.
The VCR resumes playback when it reaches the end of the marked
commercials.
COMMERCIAL ADVANCE Display
Press 3 to switch between Display: BLUE or VIDEO.
•
•
Select BLUE to display a blue background when the VCR advances through
the block of marked commercials.
Select VIDEO to display the recorded video when the VCR advances
through the block of marked commercials.
44
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
MOVIE ADVANCE
®
MOVIE ADVANCE helps you locate certain parts of prerecorded movies (rented or purchased).
This feature works two ways: 1) you can go to the beginning of the movie, or, 2) you can skip
from one preview to the next. MOVIE ADVANCE works only on tapes with the safety tab
removed recorded in SP speed.
1. To select MOVIE ADVANCE, insert a tape with its safety tab removed and
press the SEARCH button on the remote control.
2. Press 1 if the tape is a purchased or rented movie, press 2 if it’s a
recording made at home, or press 3 if it’s something else, you don’t know,
or you do not want to select MOVIE ADVANCE.
MOVIE ADVANCE
What type of tape
is this?
1 Purchased/Rented Movie
2 Home Recording
3 Other
Pressing 2 or 3 gives the same response and takes you to a different search
feature. If you accidentally make a wrong selection, press STOP•EJECT on
the VCR (STOP on remote) and reinsert the tape. Press SEARCH.
Press CLEAR to cancel
If you press 1, the MOVIE ADVANCE menu appears.
3. Press 1 to advance directly to the beginning of the movie or press 2 to view
the first (next) preview.
MOVIE ADVANCE
Would you like to go to
the start of the movie
or to the next preview?
•
Press 1 to Go To Movie. The following screen appears with a blue
background.
1 Go to movie
2 Go to preview
When the movie is found, you will see a message reading The movie is
ready. Press PLAY to start.
Press CLEAR to cancel
Note: You can press the STOP button to cancel the MOVIE ADVANCE
search.
•
Press 2 to Go To Preview. The on-screen display will tell you that the
VCR is looking for the start of the next preview.
MOVIE ADVANCE
The movie is ready.
Press PLAY to start.
When a preview is detected, the VCR cues it and begins playing.
To Override the Show Previews Mode:
Press STOP to cancel
Press the SEARCH button while a tape is being searched.
Pressing the SEARCH button while:
•
•
•
The tape is reversing will begin searching for the start of the next preview
or long commercial.
Searching for preview
The tape is searching forward for the next preview will reverse the tape
back to the start current preview.
Press SEARCH to reverse
Press STOP to cancel
The VCR is playing will advance the tape to the start of the next preview,
long commercial, or the start of the movie (whichever comes first).
Chapter 4
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
Pro-Tect Plus™ Locking Feature
To protect set timer recordings and to disable the VCR for use, the unit can be locked so that the
buttons on the front panel or remote control won’t work.
•
To Lock: Press and hold either the remote control’s ON•OFF or VCR button until the front
panel display flashes.
•
To Unlock: Press and hold either the remote control’s ON•OFF or VCR button until the
front panel display flashes for several seconds. Unlocking is the only way to turn on and use
the VCR.
Tracking
Your VCR has automatic tracking which removes streaks and noise from the picture. Automatic
tracking is activated when you insert a tape or turn on the VCR. Occasionally you may need to
manually adjust tracking, especially if the tape was recorded on a different VCR. Use the
–
TRACKING /+ buttons on the VCR front panel or remote control to remove streaks and noise.
You can also use tracking when pausing a tape to reduce the noise of the stilled picture.
When manually adjusting the picture, automatic tracking is turned off. To turn automatic tracking
back on, eject the tape and reinsert it.
Note: Tracking has no effect when recording– only during playback.
Hours
0:30:00
Minutes
Time Counter
The time counter shows the actual time used when recording or playing back a
tape. The time counter helps locate the beginning or end of recorded events. It
resets to 0:00:00 whenever a tape is ejected from the VCR.
Seconds
For example, if you record a 30–minute program at the beginning of a tape,
rewind it, and then want to go to the end of the first program to start another
recording:
1. Press the INFO button twice to display only the time counter.
2. Press the CLEAR button to reset the time counter to 0:00:00.
3. Press the remote control’s FORWARD button (FWD on the VCR) to advance
a tape until the time counter reads 0:30:00.
4. Press the STOP button. This is the approximate end of a 30-minute program
(you may want to press the PLAY button to verify). When the tape is cued
correctly, you can begin recording.
5. Press the INFO button to remove the time counter from the screen and
return to the normal display mode.
46
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
On-Screen Displays
Pressing the INFO button displays the status of the VCR (Stop, Play Record,
etc.) as well as the channel number, time counter position, date, time, and tape
speed on the TV screen.
Note: The date and time must be set before they can be displayed.
1. Press the INFO button to show the on-screen displays. The current time is
1
2
Stop
Ch 05
0:30:00
displayed in the VCR’s front panel.
11/18/01 Sun 1:30PM SLP
On-screen display (times
out)
2. Press INFO again to have only the time counter remain on the screen. The
0:30:00
time counter is also displayed in the VCR’s front panel.
Time counter only (does
not time out)
3. Press INFO again to have no displays appear on the TV screen. The time
counter remains in the VCR’s display panel. This is useful for dubbing
tapes.
3
No displays will appear
(useful for dubbing)
4. Press the INFO button again to return to the normal display. The current
time is displayed in the VCR’s display panel.
Note: Turning off the VCR also resets the displays.
Chapter 4
47
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Features
AUDIO
Audio Set-Up Features
Your VCR’s audio setup features affect both tape playback and recordings. The
1 Reception:
2 Tape Playback: HI-FI
STEREO
features in this section are accessed through the AUDIO menu.
To Display the Audio Menu:
1. Press the MENU button to bring up the VCR MAIN MENU.
2. Press 7 to choose AUDIO.
0 Exit
With the AUDIO menu displayed, you are ready to select an item from the
menu to set up.
Reception
Some TV programs are broadcast with stereo audio or a Second Audio Program
(SAP) which offers a second language. The Reception feature lets you select the
type of audio you want to record. Press 1 repeatedly to switch between
Reception: STEREO, MONO, or SAP.
•
STEREO– used for normal or stereo broadcast TV recording. The HI-FI
indicator lights on the VCR front panel when the VCR’s tuned station is
broadcasting in stereo.
•
•
MONO– used if the stereo signal is weak or the sound is too noisy.
SAP– used to hear/record a Second Audio Program instead of the normal
audio on both the Hi-Fi and linear tracks.
Tape Playback
The VCR records the same audio on both the Hi-Fi stereo and linear tracks on
the tape. Hi-Fi sound is recorded on separate left and right stereo channels.
Monaural sound is recorded on the linear track. In the AUDIO menu, press the
2 button repeatedly to switch between Tape Playback: Hi-Fi, LINEAR, and MIX.
To enjoy Hi-Fi sound, connect your VCR to a stereo television or amplifier/
receiver using the audio jacks. The Tape Playback feature lets you select which
audio you play back.
•
•
•
Hi-Fi Used to play back sound recorded on the Hi-Fi tracks and for
normal use.
LINEAR Used to play back the sound recorded on the linear monaural
track, such as a Second Audio Program, or a dubbed voice-over.
MIX Used to play back the sound recorded on both the linear track and
the Hi-Fi track, sound-on-sound. The Hi-Fi indicator lights when MIX is
active.
48
Chapter 4
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Other Information
Chapter Overview:
• Troubleshooting
• Commercial Advance Q&A
• Front, Rear, and Display Panel Diagrams
• Specifications
• Care and Cleaning
• Warranty Information
• Finding the TV’s Video Line Input
• Advanced Connection Diagram
• Glossary
• Index
Changing Entertainment. Again.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting Tips
In this section, you will find answers to common recording, playback, and general VCR questions.
Consulting with this section first when there is problem may help you answer common questions.
General VCR Problems
No power
•
•
Check to make sure it is plugged into an operating outlet.
Check to make sure your connections are correct.
VCR does not respond to the remote control
•
•
•
Check to make sure there are no objects between the VCR and the remote control.
The remote control’s batteries may need changing.
You are not in VCR-controlling mode. Press the remote control’s VCR button to control it.
There’s poor or no picture for normal TV viewing
•
•
•
Make sure the VCR indicator is off.
Make sure the TV is switched to an active channel.
Make sure the antenna connections are secure and correct.
Rewind does not operate
•
Check to make sure the tape is not already rewound.
The clock shows an incorrect time or date
•
•
•
•
•
There may have been a power interruption. Reset the VCR’s time and date.
Make sure the clock is set accurately (check AM/PM and date).
Check the Daylight-Saving setting. The clock may have adjusted for Daylight-Saving Time.
Time did not adjust for Daylight-Saving time.
Check to make sure the Daylight-Saving Time feature is set correctly.
The VCR makes noise when stopped
•
The VCR is removing the tape from the playheads. This is normal. The head cylinder inside the VCR will
continue to rotate for a few minutes after you put the VCR in the stop mode.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type: CABLE/ANTENNA feature is set to CABLE.
TIMER flashes on the VCR front panel display
•
•
The clock is not set.
Check to make sure there is a cassette in the VCR when a timer recording is set ad the power is turned
off.
On-screen menus appear in English, French, or Spanish
•
Check the LANGUAGE feature for the preferred on-screen language.
50
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Recording Problems
Will not record
•
•
•
•
•
Make sure there is a recordable tape in the VCR.
Eject then reinsert the tape.
Make sure the tape is not broken.
Make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback.
Make sure the Pro-Tect Plus feature is not active.
A VCR Plus+ system or timer recording was not made or the wrong program recorded
•
•
•
•
•
•
•
•
•
•
Make sure the correct PlusCode programming number is entered.
Make sure the program was entered correctly (the wrong channel or times may be entered).
Make sure the cable box or satellite receiver was turned on when recording was to begin.
There may have been a power interruption. Reset the time and date.
Check to see if time and date are correct – including AM/PM.
Make sure the program did not exceed the tape’s length or that the tape was not rewound beforehand.
Make sure the VCR was turned off at the time recording started.
Make sure there was a tape in the VCR with its safety tab intact.
The VCR ejects tapes when the end is reached during a timer recording.
Make sure the VCR Plus+ system setup was completed correctly.
Will not record
•
•
Make sure the tape’s safety tab is intact.
Make sure the VCR is not in Video Line Input mode. Press INPUT on the remote control to return to
normal viewing.
Playback Problems
Snowy or no picture during playback
•
•
Press the remote control’s TV•VCR button to activate VCR-controlling mode. VCR appears in the front
panel display when active.
Check the TV channel selected (3 or 4) to make sure it matches the channel selected with CH. 3/4
switch on the back of the VCR.
•
•
Check to make sure the TV’s fine tuning is correct for the channel selected.
If you use A/V cables and jacks to connect the VCR to the TV, check all connections for snug and
correct connections.
•
Check to make sure the TV monitor is set to Video Line Input (see How to Find Your TV’s Video Line
Input in this section of the manual for detailed information).
•
•
Try another tape.
Some snow/streaks are normal during search, stop action, frame advance, and slow-motion playback.
Chapter 5
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Streaks in picture during normal playback
•
•
Press one of the TRACKING buttons to move streaks up or down for the best picture.
Check to make sure the tape is of good quality and not worn out.
Time counter not working or time counter not working in search modes
•
The time counter does not advance during unrecorded portions of tape. When an unrecorded segment of tape is
encountered, the time counter will hold its count until recorded material is detected again.
•
•
A minus (–) will appear in front of the time if you rewind the tape farther back than a counter reading of 0:00:00.
The time counter disappears during search; this is normal.
Will not play
•
•
•
•
•
Check to make sure there is a tape in the VCR.
Try ejecting and reinserting the cassette.
Check to make sure the tape is not broken.
Check to make sure the VCR is not in pause mode. Press PAUSE or PLAY to return to normal playback.
Check the Pro-Tect Plus™ feature.
Will not Auto Channel Search active channels correctly
•
•
•
Check to make sure the antenna connections are secure and correct.
Check to make sure the Signal Type: CABLE/ANTENNA feature is set correctly.
If Detect Automatically was selected for the Signal Type in the AUTO CHANNEL SEARCH menu, try using either
CABLE TV or ANTENNA instead.
•
May not be necessary if using a cable box for all channels. Contact your local cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cassette with safety tab removed does not start to play automatically
•
Check to make sure the AUTO PLAY ON/OFF feature is set to ON.
Time counter disappears during searching
•
This is normal.
There is no stereo sound during playback
•
•
Make sure the Tape Playback feature is set to Hi-Fi to hear stereo sound during playback.
You must use A/V cables (not provided) and jacks to connect the VCR to the TV (or stereo) to hear true stereo
sound during playback.
The stereo Audio is too noisy
•
•
The stereo signal is weak. Set the Reception: STEREO/SAP/MONO to MONO.
Press either the TRACKING – or + button to minimize picture noise.
52
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Questions and Answers About
®
Will commercials be scanned through only on playback of recordings?
Yes. The VCR rewinds and marks commercial segments after a recording is finished.
How fast does this feature scan through commercial breaks?
In SLP tape speed, a 3-minute commercial break is scanned through in approximately 8-12
seconds. In SP, it takes about 25-35 seconds.
Are commercials still recorded if I want to watch them?
Yes. The recorded program, including commercials, can be viewed by setting the Playback
feature to MANUAL.
What if the VCR scans forward through part of my program?
Press PLAY or STOP while the tape is being automatically skipped. Rewind the tape back to a
position before skipping started, then press PLAY. Automatic skipping will start again after the
end of the commercial group is detected by the VCR.
Once a recording has been marked, does COMMERCIAL ADVANCE work each time
the tape is played?
Yes. If the Playback feature is set to AUTO, the marked commercials should be skipped each
time the tape is played in a VCR that has the feature.
After marking commercials, is the tape left at the beginning or end of the
recording?
The tape is left at the end of the recording so it is in position to begin additional programmed
recordings.
Does the marking process interfere with other programmed recordings?
No. If two or more recordings are programmed together without sufficient time to mark the
first recording, marking will take place after all recordings are completed.
What happens if the marking process is interrupted?
Marking can be interrupted to allow use of the VCR. Marking will resume again when the
VCR’s power is turned off as long as the tape has not been ejected from the VCR.
Does COMMERCIAL ADVANCE work in all recording speeds?
Yes, the feature works in SP and SLP.
Will COMMERCIAL ADVANCE marked recordings work in non-Commercial Advance
VCRs?
A marked recording will play in a VCR that does not have the feature, but commercials will
not automatically be skipped.
Chapter 5
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
STOP•EJECT
RECORD
TV•VCR
POWER
TAPE SPEED
INPUT
VIDEO
VIDEO
RIGHT
REV
FWD
INPUT
LEFTMONO
CHANNEL
TRACKING
Front Panel
AUDIO (LEFT/MONO and RIGHT) and VIDEO Input Jacks Receives signals from another
component (like another VCR or camcorder) when connected to the VCR using A/V jacks. Use the
INPUT button to select L2 to record from these jacks (L1 indicates the rear panel A/V jacks being
active).
CHANNEL TRACKING Up and Down Adjusts the image quality by removing picture “noise”
and distortion.
FWD Forwards the tape when the VCR is stopped. Searches the picture forward during playback.
Starts slow motion during play-pause and increases slow-motion speed.
PLAY•PAUSE Plays a tape. Pauses action for viewing during playback. Pauses recording to
prevent recording of unwanted scenes.
POWER Turns the VCR on or off.
RECORD Starts VCR recording. Also used for Express Recording (XPR).
REV Rewinds the tape when the VCR is stopped. Searches the picture in reverse during
playback. Starts slow motion during play-pause and decreases slow-motion speed.
STOP/EJECT A single press of this button stops normal VCR functions such as record, playback,
rewind, fast-forward, or pause. If pressed a second time, this button ejects an inserted tape.
TV•VCR Switches the picture signal so that it either comes from the VCR or the TV cable/
antenna signal.
54
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
AM
VCR
Display Panel
Time, Channel Number, Line Input Indicator (L1 or L2), Tape Speed Indicator, or Status
Indicator
Channel Number or Line Input Indicator The channel number appears when the VCR is tuned
to a channel. The line indicator (L1 or L2) appears when the VCR’s line input is selected. Select L1
to record from the back jacks or L2 to record from the front jacks.
Time The current time appears. Only an AM indicator appears with the time. There is no indicator
for PM.
Status Indicators Show what the VCR is doing.
•
dn & Ld (Down and Load) Front panel display alternates between these two words when
time data is being downloaded.
•
•
•
•
•
•
•
•
•
•
•
EJCT (Eject) Cassette ejected
FF Fast forwarding
HI VCR turned on and BYE VCR turned off
PLAY In playback (flashes during play-pause and slow)
REW Rewinding
R0:30 Express recording in progress
SAFE Pro-Tect Plus feature turned on
SCH and SCH – Forward or reverse search
SP and SLP Tape speed
STILL Play-pause
STOP Tape is stopped
Timer Indicator ( ) Lights during an express or timer recording or when the VCR is set for a
timer recording and turned off. Flashes when a timer recording is set and there is no tape in the
VCR.
VCR Indicator (Applies only if the VCR Viewing Channel is 3 or 4). Press the TV•VCR button to
turn on or off.
•
•
VCR indicator on: Picture from VCR.
VCR indicator off: Picture from TV channel.
Chapter 5
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
ANT. IN
RF OUT
AUDIO
R
L
IN
OUT
CH.
3
4
VIDEO
Back Panel
ANT. IN jack Receives a signal from an antenna or cable system when the VCR is attached with
RF cables.
AUDIO (LEFT and RIGHT) and VIDEO IN jacks Receives signals from another component,
such as another VCR or camcorder, when connected to these jacks. Use the INPUT button on the
VCR or remote control to select the rear video line input A/V jacks (L1) to record from these jacks.
AUDIO (Right and Left) and VIDEO OUT jacks Sends signals from the VCR to another
component, like a TV or another VCR, when the other component is connected to these jacks.
CH. 3/4 switch Determines the channel to which the TV must be tuned in order to see the
VCR’s picture. Not used when connecting the VCR to the TV using A/V cables.
RF OUT jack Passes the VCR’s signal to a TV using the supplied RF cable.
56
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Format:
VHS
Record/Playback
System:
Video: 4-head
Audio: VHS Hi-Fi record/playback system
Video Signal System: EIA standard: NTSC color
Antenna:
75-ohm external VHF/UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada:
178 channels capability*
(122 cable channels)
Type:
AutoProgramming frequency synthesis
Power Requirement: 120V AC, 60 Hz
Power Consumption: 17 watts (standby < 3 watts)
Dimensions:
3.58 inches high (91 mm)
16.92 inches wide (430 mm)
9.57 inches deep (243 mm)
Weight:
Other:
7.1 pounds (3.2 kg)
Automatic head cleaner
Storage Temperature - 22˚F to +149˚F
Range:
(-30˚C to +65˚C)
Operating
+41˚F to +104˚F
Temperature Range:
(+5˚C to +40˚C)
*Check your cable company‘s compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your VCR. Remove dust from
the ventilation holes on the top, back, sides, and bottom of the VCR and all connected components.
Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid
excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate
more dust. We recommend using a nonabrasive, antistatic cleaner and polisher.
Chapter 5
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
RCA VCR Limited Warranty
What your warranty covers:
•
Any defect in materials or workmanship.
For how long after your purchase:
•
•
90 days for labor charges.
One year for parts.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
•
•
Pay any Authorized RCA VCR Service Center the labor charges to repair your VCR.
Pay any Authorized RCA VCR Service Center for the new or, at our option, refurbished replacement parts required to
repair your VCR.
How you get service:
•
Take your VCR to any Authorized RCA VCR Service Center. To identify your nearest Authorized RCA VCR Service
Center, ask your dealer, look in the Yellow Pages, or call 1-800-336-1900.
•
•
Show the Authorized Service Center Representative your evidence of purchase date or first rental.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual clearly describes how to install, adjust, and operate your VCR. Any
additional information should be obtained from your dealer.)
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Batteries.
A VCR that has been modified or incorporated into other products or is used for institutional or other commercial
purposes.
•
•
A VCR purchased or serviced outside the U.S.A.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your VCR. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
How State Law relates to warranty:
•
This warranty gives you specific legal rights and you also may have other rights that vary from state to state.
If you purchased your VCR unit outside the United States:
•
This warranty does not apply. Contact your dealer for warranty information.
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs
of such service calls are the sole responsibility of the purchaser.
58
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Finding the TV’s Video Line Input
TV Button
You need to tune your TV to the video line input if you are using the
VCR’s Audio/Video (A/V) OUT jacks to connect to the TV’s A/V input
jacks. You must select the TV’s video line input before you can see the
VCR’s menus, the cable/antenna reception, and the content that’s on a
tape.
ON • OFF
VCR1
TV
DVD VCR2 AUX SAT
CABLE
•
The video line input for TVs varies by brand and model. Below are some
steps to try to find your TV’s video line input:
SEARCH
MUTE
•
If your TV brand is RCA, GE, or Proscan, press the TV button on the
VCR’s remote control, then press the INPUT button.
CH +
CH -
•
If you have another brand of TV, see the chapter Using the Remote
Control to see if the VCR’s remote can be programmed to control your
TV. If so, once completed, follow the step above.
SPEED
GUIDE
GO BACK
INFO
If those options do not work, try the following ideas. You might access the
video line input by:
OK
•
•
Pressing a button on the TV’s remote control (see the table below).
Selecting a specific channel from the TV’s on-screen menu system (see
the table below).
MENU
CLEAR
•
•
Tuning directly to the video line input by selecting a specific channel
number (see the table below)
3
6
9
1
4
7
2
5
8
0
Going through all available channels by pressing the channel up or
down buttons on the TV or its remote control.
INPUT
ANTENNA
Common Video Line Input scenarios:
REVERSE
PLAY
STOP
FORWARD
INPUT
Button
RECORD
PAUSE
Video Input Channel Variations
Button/Switch
on the TV
Button on the
TV Remote
Channel
Number
- TRACKING +
FR.ADV
EDIT
VIDEO
SIGNAL
VID 1
VID 1
LINE
VID
00
90
91
VID 2
S-VID
S-VIDEO
VIDEO
S-VID
INPUT
S-VIDEO
SOURCE
AUX
92
93
VID 1
VID 2
Chapter 5
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Advanced Connection
TV + VCR + Satellite Receiver
• Using A/V and RF Coaxial Cables
Note: Your satellite receiver and television back panels may not look exactly like the models
shown here.
This connection can also be used for a cable box.
1. Connect the VCR to the TV
TV
A. Connect one end of the supplied RF
AUDIO
VIDEO
R
L / MONO
L
coaxial cable to the RF OUT jack on
the back of the VCR and the other end
to the TV’s antenna input jack.
IN
OUT
CABLE/
ANTENNA
S-VIDEO
B. Connect the A/V cables. Connect audio
cables to the VCR’s R and L Audio OUT
1A
1B
jacks and the other ends to the TV’s
corresponding audio input jacks (if your
TV only has one audio input jack, use
the VCR’s L audio jack to connect).
Connect one end of the video cable to
the VCR’s VIDEO OUT jack, and the
other end to the TV’s video input jack.
VCR
AUDIO
ANT. IN
R
VCR
L
RF OUT
OUT
IN
CH
3
4
VIDEO
2. Connect the satellite receiver to the VCR
2B
SATELLITE
RECEIVER
2A
A. Connect one end of a second RF coaxial
cable (not included) to the VCR’s ANT.
IN jack. Connect the other end to the
satellite receiver’s antenna output jack.
IN FROM ANT
OUT TO TV
CH3
CH4
OUT
L
SATELLITE
IN
VIDEO
R
S-VIDEO
3
4
B. Connect the A/V cables. Connect audio
cables to the VCR’s R and L audio IN
jacks and the other ends to the satellite
receiver’s audio output jacks. Connect
one end of the video cable to the VCR’s
VIDEO IN jack, and the other end to
the satellite receiver’s video output
jack.
From Cable
or TV Antenna
From
Satellite
3. Connect a TV antenna or cable feed to the satellite receiver
If you have cable or a standard TV antenna, connect its RF coaxial cable (not included) to the
antenna input jack on the satellite receiver.
4. Connect the satellite antenna’s cable to the satellite receiver
Connect the satellite antenna’s RF coaxial cable feed (not included) to the receiver’s satellite
input jack.
Note: To hear stereo output from the satellite receiver, you must use the video line input
“channel.” RF coaxial cable only carries mono sound.
60
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Glossary
A/V Jacks & Cables Commonly called “RCA-type” cables. Improves
picture and sound quality over RF Coaxial cables. A/V cables are required
for stereo audio.
EnergySaver Automatically turns the VCR off after a user-defined
period of inactivity.
Express Recording (XPR) A method of timer recording which tapes
for a set period of time using 30-minute increments.
Pro-Tect Plus™ Allows the VCR to be disabled so that the front panel
and remote control buttons don’t work. Useful for protecting timer
recordings.
QuickSet Guide An first-time use, interactive, menu-based system that
walks you through several setup steps in a series of questions. The
QuickSet Guide is also available in the VCR’s Main Menu.
SAP (Second Audio Program) A second sound track that may be
included with a stereo broadcast. Usually used for foreign language dubs
of programs.
VCR Channels List The active list of channels available to the VCR
using the CHANNEL +/- buttons.
XPR See Express Recording above.
Chapter 5
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Index
A
D
M
ADD/REMOVE CHANNELS screen
21
Date and time setting 21
Design specifications 57
Digital satellite receiver setup 16
Display panel 55
Mapping VCR Plus+ Programming
System Channels Manu 37
MENU button 16, 35, 37, 43, 48
MUTE button 30
Arrow buttons 28, 29
Audio
playback type 48
selecting 48
Displays, on screen 47
DVD button 28
Audio features, set up 48
AUDIO IN jacks 60
AUDIO menu 48
N
Number buttons 23, 29
E
Audio/Video (A/V) jacks 18, 54, 56
Auto channel search 20
Auto clock feature 21
Auto play feature 13, 23
Auto TV/VCR feature 24
Automatic rewind 13
Automatic tracking 13, 46
AUX button 28
EDIT button 29
EJECT button 13
EnergySaver feature 25
Express Recording (XPR) 2, 34
O
OK button 28
ON•OFF button 28, 46
On-screen displays 47
Overheating 6
F
FR. ADV button 29
FR. ADV button 41
FORWARD button 13, 29, 41
Frame advance 41
P
B
PAUSE button 13, 29, 40
Picture search options 41
PLAY button 13, 29, 40
PLAY/PAUSE button 41
POWER button 13
Power surges 6
PREFERENCES menu 23, 43
Pro-Tect Plus locking feature 46
Back panel jacks 56
Front panel controls 54
FWD button 40, 41, 46
Back-lit remote 28
Basic recording 13
Batteries (remote control) 11
Broadcast stereo TV recording 40
G
Glossary 61
C
GO BACK button 29, 30
GUIDE button 30
Cable box codes 19
Cable box setup 16
Cables
Q
QuickSet guide 16
positioning 6
I
CH + and - buttons 29, 30
CHANNEL buttons 20
Channels, adding/removing 21
CHANNELS menu 16, 18, 20, 37
CLEAR button 29, 30, 42
Clock display 55
Index search 42
Indicators in display panel 55
INFO button 29, 46
INPUT button 29, 35, 40, 59
R
REC display 55
Reception: STEREO/MONO/SAP
feature 40, 48
COMMERCIAL ADVANCE 43
questions and answers 53
Component buttons 28
Connections 8
RECORD button 13, 29, 34, 40, 54
L
L1 indicator 40
L2 indicator 40
Controls
LANGUAGE menu 16
Light button 28
back panel 56
front panel 54
Locking feature 46
Copying tapes 40
62
Chapter 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Recording
basic 13
Slow motion 41
Specifications 57
Speed
VCR Plus+
channel lists 38
channel worksheet 39
channels 37
VCR Plus+ GOLD Programming
System 36
broadcast stereo TV 40
copying /editing tapes 40
Express (XPR) 2, 34
SAP 40
speeds 25
timer 35
SLP 25
SP 25
SPEED button 13, 25, 34
Speeds, recording 25
STOP button 13, 30, 34, 40, 54
VCR viewing channel 11, 13
VCR2 button 28
Remote
Video Input Channel 59
VOL buttons 30
buttons 28
Remote, batteries 11
Removing/adding channels 21
REV button 40, 54
REVERSE button 13, 29, 41
Reviewing timer programs 35
Rewind, automatic 13
RF OUT jack 56
T
Tab, safety 13
Tape eject 13
Tape playback feature 48
Tape playback: HI-FI/LINEAR/MIX
48
Tape speeds 25
Time and date 21
Time counter 46
Time counter display 47
Time display on TV 47
TIME menu 22
S
Safety tab 13, 24
SAP 40
SAT•CABLE button 28
Satellite receiver codes 17
Search
Time setting
Daylight-saving 22
set time zone 22
forward 41
Timer programs
reverse 41
clearing 35
SEARCH button 29, 42
Set up
reviewing 35
Timer recording 35
stopping 35
auto play feature 23
auto TV/VCR feature 24
cable box 16
Daylight-Saving 22
digital satellite system 16
front panel 25
language feature 16
PREFERENCES menu 23
tape speed feature 25
time and date 21
time zone 22
Tracking 46
TRACKING buttons 13, 30, 41, 46
Troubleshooting 50
TV button 28, 59
TV function buttons 30
TV•VCR button 24, 40
V
VCR
using menu system 16
VCR Plus+ channels 37
Signal type
connecting 8
VCR function buttons 28–30
VCR indicator 40, 55
VCR MAIN MENU 16, 22, 48
changing 20
selecting 20
Chapter 5
63
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the
Indianapolis address listed in this manual or on
the carton. This will only add delays in service
for your product.
Thomson multimedia Inc.
10330 North Meridian Street
Indianapolis, IN 46290
©2001 Thomson multimedia Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Mexico
TOCOM 15708290
Download from Www.Somanuals.com. All Manuals Search And Download.
|