RCA Telephone 27600 User Guide

27600  
WALL MOUNT INSTALLATION  
INTRODUCTION  
MUTE  
STORING A PAUSE IN MEMORY  
TROUBLESHOOTING GUIDE  
LIMITED WARRANTY  
ACCESSORY ORDER FORM  
40-Channel 2.4GHz  
CordlessTelephone  
User’s Guide  
Because it is necessary to charge the handset for  
12 hours prior to connecting the phone for use the  
first time, it is better to leave the unit on a flat  
surface during initial charge before attempting to  
hang it on the wall.  
Use the MUTE button to interrupt a phone conversation to talk privately with someone  
else in the room.  
Use the RE/PA button to insert a pause when a delay is needed in the dialing sequence  
(for example, when you must dial a 9 to get an outside line or when you must enter  
codes to access your bank’s information line). Each pause counts toward the 16-digit  
limit.  
Your Cordless Telephone is designed to give you flexibility in use and high quality  
performance. To get the most from your new cordless telephone, we suggest that you  
take a few minutes right now to read through this instruction manual.  
What your warranty covers:  
7
In case of difficulty, please check the following Troubleshooting Guide before seeking  
service.  
CATALOG NUMBER  
PRICE*  
DESCRIPTION  
QUANTITY TOTAL  
8
Defects in materials or workmanship.  
White  
5-2514  
5-2518  
Black  
9
1. Press MUTE to activate mute feature (the BAT LOW/MUTE indicator blinks).  
2. Press MUTE again to turn it off.  
For how long after your purchase:  
AC power supply  
Belt Clip  
5-2501  
5-2519  
$19.95  
$10.85  
$21.35  
Problem  
Solution  
One year, from date of purchase.  
IMPORTANT: Because cordless phones operate on electricity, you should have at least one  
phone in your home that is not cordless, in case the power in your home goes out.  
If you need to dial 9 to get an outside line and want to store a number in memory  
without having to dial 9 each time, you would:  
(The warranty period for rental units begins with the first rental or 45 days  
from date of shipment to the rental firm, whichever comes first.)  
What we will do:  
No dial tone  
• Check installation:  
1. Make sure the mounting bracket is securely  
fastened.  
Replacement battery  
5-2505  
— Is the base power cord connected to a  
working outlet?  
5
4
TONE/PULSE DIALING  
This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing.  
The phone is automatically set for touch-tone use.  
1. Make sure the phone is OFF.  
BEFORE YOU BEGIN  
— Is CHARGE/IN USE indicator on?  
— Is the telephone line cord connected to  
the base unit and the wall jack?  
2. Set the RINGER switch to ON.  
3. Place the handset in the base.  
Provide you with a new or, at our option, a refurbished unit.The exchange unit  
is under warranty for the remainder of the original products warranty period.  
2. Press MEM.  
To order, call 1-800-338-0376 (for accessories only) or complete this order form.  
6
3. Press 9.  
How you get service:  
4. Plug the power supply into the power jack on the back of the  
base and the other end into an AC outlet. The CHARGE/IN  
USE indicator comes on, indicating the battery is charging.  
• Disconnect the base from the wall jack  
and connect another phone to the same  
jack. If there is no dial tone in the second  
phone, the problem might be your wiring  
or local service.  
• Is the handset out of the base units  
range? Move closer to the base unit.  
• Make sure the battery is properly charged  
(12 hours).  
• Is the battery pack installed correctly?  
• If the phone still does not work, discon-  
nect the power cord and remove the  
battery pack.Then reconnect the power  
cord and reinstall the battery pack. Place  
handset in the base for 10 seconds to  
allow it to reinitialize.  
PARTS CHECKLIST  
Make sure your package includes the items shown here.  
TONE  
4. Press RE/PA.  
For credit card purchases  
Properly pack your unit. Include any cables, etc., which were originally  
provided with the product. We recommend using the original carton and  
packing materials.  
1. Make sure the phone is OFF.  
5. Dial the phone number you want to store in memory.  
6. Press MEM.  
Your complete charge card number, its expiration date and your signature  
are necessary to process all charge card orders.  
2. Press and hold the CHAN button for 2 seconds until the phone beeps.  
3. Press TONE*.  
Allow the phone to charge for 12 hours before using the first  
time. If you don't charge the phone properly when you first  
set up the phone, perfomance of the battery will be  
compromised.  
”Proof of purchase in the form of a bill of sale or receipted invoice which is  
evidence that the product is within the warranty period, must be presented to  
obtain warranty service.” For rental firms, proof of first rental is also required.  
Also print your name and address and a description of the defect. Send via  
standard UPS or its equivalent to:  
T
ALK  
CHAN  
IN USE BA  
MUTE  
T
L
O
W
7. Press any number key (0-9) to store the phone number in that memory location.  
Copy your complete account number from your VISA card.  
RE/P  
A
FLASH  
MUTE  
3
I
ABC  
JKL  
DEF  
3
1
4
2
5
8
0
PAGE  
GHI  
MNO  
6
Telephone line cord  
PQRS  
TUV  
WXYZ  
9
PULSE  
7
CHARGE/  
IN USE  
T
ONE  
OPER  
TIP: If you need a longer pause, press RE/PA button more times.  
#
*
PAGE  
OFF  
ON  
T
ALK  
CHAN  
MUTE  
V
OL  
MEM  
IN  
U
S
E
B
M
A
U
T
T
L
E
O
W
1. Make sure the phone is OFF.  
5. Remove the mounting bracket. Rotate it so that the bottom of  
the phone is flat. Reattach the mounting bracket by inserting  
the tabs into the slots on the top of the unit first, and then  
snapping the bottom tabs into place.  
RINGER  
RE/P  
A
FLASH  
My card expires:  
ABC  
DEF  
3
1
4
2
5
8
GHI  
JKL  
MNO  
6
2. Press and hold the CHAN button for 2 seconds until the phone beeps.  
3. Press #.  
ATLINKS USA, Inc.  
PQRS  
TUV  
WXYZ  
9
7
T
ONE  
OPER  
0
#
DIALING A STORED NUMBER  
1. Make sure the phone is ON by pressing the TALK button.  
*
c/oThomson multimedia Inc.  
11721 B Alameda Ave.  
Socorro,Texas 79927  
OFF  
ON  
VOL  
MEM  
RINGER  
Copy your complete account number from your  
Master Card or Discover.  
AC power  
supply  
Mounting  
bracket  
Belt clip  
6. Plug the telephone line cord into the TEL LINE jack on the back of the base and into  
a modular phone jack. Then stuff the excess line cord into the mounting bracket.  
2. Press MEM.  
TEMPORARY TONE  
This feature enables pulse (rotary) service phone users to access touch-tone services  
offered by banks, credit card companies, etc., by pressing the TONE button to  
temporarily make the phone touch-tone compatible. To get information about your bank  
account, for example, you would:  
Base  
Handset  
Pay any charges billed to you by the Exchange Center for service not covered by the warranty.  
3. Press the number (0-9) for the desired memory location. The number dials  
automatically.  
Insure your shipment for loss or damage. Atlinks accepts no liability in case of  
damage or loss.  
7. Slip the mounting holes over the wall plate posts and slide the unit down firmly into  
place. (Wall plate not included.)  
MODULAR JACK REQUIREMENTS  
Copy the number above your name on  
the Master Card.  
A new or refurbished unit will be shipped to you freight prepaid.  
Dial tone is OK, but  
can’t dial out  
• Make sure the tone/pulse setting is  
programmed correctly.  
You need an RJ11 type modular jack, which is the most common type of phone  
jack and might look like the one pictured here. If you don’t have a modular  
jack, call your local phone company to find out how to get one installed.  
8. Remove the handset hook; turn it upside down, and put it back in the slot. You need  
to do this so the handset doesn’t fall out of the base.  
IMPORTANT: If you make test calls to emergency numbers stored in memory, remain  
on the line and briefly explain the reason for the call to the dispatcher. Also, it’s a good  
idea to make these calls in off-peak hours, such as early morning or late evening.  
What your warranty does not cover:  
Customer instruction. (Your Owners Manual provides information regarding  
operating instructions and user controls. Any additional information, should be  
obtained from your dealer.)  
1. Press the TALK button.  
9. Raise the base antenna.  
Handset does not ring  
• Make sure the RINGER switch on the  
handset is turned to ON.  
2. Call the bank’s information line.  
DIGITAL SECURITY SYSTEM  
My card expires:  
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse  
(rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you  
have, check with the phone company.  
3. Press the TONE button after your call is answered.  
4. Follow the voice instructions to complete your transaction.  
5. Hang up when finished. The phone returns to pulse (rotary) service.  
You may have too many extension phones  
on your line.Try unplugging some  
phones.  
BELT CLIP OPERATION  
Installation and setup service adjustments.  
Batteries.  
Damage from misuse or neglect.  
Products which have been modified or incorporated into other products.  
Products purchased or serviced outside the USA.  
Acts of nature, such as but not limited to lightning damage.  
Your cordless phone uses a digital security system to provide protection against false  
ringing, unauthorized access, and charges to your phone line.  
When you place the handset in the base, the unit verifies its security code. After a  
power outage or battery replacement, you should place the handset in the base for  
about 20 seconds to reset the code.  
• See solutions for “No dial tone.”  
CONNECTING THE  
BELT CLIP  
There are two slots, one on each side of  
the handset.  
CAUTION: Use only the ATLINKS USA 5-2501(black) or 5-2514( white) power  
supply that came with this unit. Using other adapters may damage the unit.  
Cannot hear phone  
conversation  
• Press the VOL button to adjust the  
volume to the desired listening level.  
PAGING THE HANDSET  
____________________________________________________________________  
INSTALLATION NOTE: Some cordless telephones operate at frequencies that may  
cause interference to nearby TVs and VCRs. To minimize or prevent such interference,  
the base of the cordless telephone should not be placed near or on top of a TV or VCR.  
If interference continues, moving the cordless telephone farther away from the TV or  
VCR will often reduce or eliminate the interference.  
Authorized Signature  
Press the PAGE button on the base to locate a misplaced  
Product Registration:  
CHARGE/  
IN USE  
handset. When you press the PAGE button, the handset  
CORDLESS PHONE BASICS  
MAKING A CALL  
After initial set up, put handset in the base for 12 hours to charge the battery.  
The only two things you need to know to make a call are:  
Please complete and mail the Product Registration Card packed with your  
unit. It will make it easier to contact you should it ever be necessary.The  
return of the card is not required for warranty coverage.  
PAGE  
beeps. Press the TALK button when you locate the  
PAGE  
You experience static,  
• Change channels.  
Attach the belt clip by inserting the  
sides of the belt clip into the slots. Snap  
the ends of the belt clip into place.  
noise, or fading in and out • Is handset out of range? Move closer to  
the base.  
Slot for  
belt clip  
Slot for  
belt clip  
handset.  
*Prices are subject to change without notice.  
We bring good things to life.  
button  
NOTE: You can still page the handset with the  
ringer off.  
Total Merchandise.........................................$_______________  
Sales Tax........................................................$_______________  
• Does the base need to be relocated?  
• Charge handset battery.  
• Make sure base is not plugged into an  
outlet with another household appliance.  
Limitation of Warranty:  
THE WARRANTY STATED ABOVE ISTHE ONLY WARRANTY APPLICABLETO  
THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED  
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO  
VERBAL OR WRITTEN INFORMATION GIVEN BY ATLINKS USA, INC., ITS  
AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY  
INCREASETHE SCOPE OFTHIS WARRANTY.  
REPAIR OR REPLACEMENT AS PROVIDED UNDERTHIS WARRANTY ISTHE  
EXCLUSIVE REMEDY OFTHE CONSUMER. ATLINKS USA, INC. SHALL NOT  
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING  
FROMTHE USE OFTHIS PRODUCT OR ARISING OUT OF ANY BREACH OF  
ANY EXPRESS OR IMPLIED WARRANTY ONTHIS PRODUCT.THIS DIS-  
CLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY  
THE LAWS OFTHE STATE OF INDIANA. EXCEPTTOTHE EXTENT PROHIBITED  
BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR  
FITNESS FOR A PARTICULAR PURPOSE ONTHIS PRODUCT IS LIMITEDTO  
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.  
FCC REGISTRATION INFORMATION  
We are required by law to collect the appropriate sales tax for each individual state,  
county, and locality to which the merchandise is being sent.  
CHANGING THE  
BATTERY  
Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and  
CHANNEL BUTTON  
If you ever experience any interference or don’t have clear voice quality, press the  
CHAN button on the handset to advance to another channel.  
68, FCC Rules and Regulations.  
Notification to the Local Telephone Company  
Press the TALK button before you dial.  
Use VISA or Master Card or Discover preferably. Money order or check must be in U.S.  
currency only. No COD or Cash. All accessories are subject to availability. Where  
applicable, we will ship a superseding model.  
Range is shorter  
than normal  
• Press the CHAN button during the  
conversation to select a new channel.  
• Position the base antenna upward.  
1
Press TALK or place the handset in the base to hang up.  
On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer  
Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone  
company.  
The REN is useful in determining the number of devices you may connect to your telephone line and still have all of these  
devices ring when your telephone number is called. In most (but not all) areas, the sum of the RENs of all devices  
connected to one line should not exceed 5. To be certain of the number of devices you may connect to your line as  
determined by the REN, you should contact your local telephone company.  
Make sure the telephone is OFF before you replace battery.  
IN USE INDICATOR  
$5.00  
Shipping/Handling....................................... $_______________  
TALK  
button  
1. Remove the battery compartment door.  
You know the phone is on when you see the IN USE  
indicator on the handset light.  
MEMORY  
Battery will not hold a  
charge or is fully charged  
and the BAT LOW lights  
• Be sure you are sufficiently charging the  
battery. When the battery has been  
charged for 12 hours, you can expect  
approximately 4 hours of talk time.  
• Check to be sure battery contacts on both  
the handset and the base are making  
contact and are clean; free of dirt or lint.  
• When the handset is placed in the base,  
check that the base CHARGE/IN USE  
indicator is on.  
Total Amount Enclosed.................................$_______________  
INSTALLATION  
TALK  
CHAN  
MUTE  
2. Disconnect the cord attached to the battery pack and  
remove the battery pack from the handset.  
IN USE BA OW  
MUTE  
T
L
Mail order form and money order or check (in U.S. currency) made payable  
to Thomson multimedia Inc. to:  
RE/PA  
FLASH  
Store up to 10 numbers in memory for quick dialing.  
Notes  
ABC  
JKL  
DEF  
1
4
2
5
8
0
3
2
REDIAL  
CHAN button  
This equipment may not be used on coin service provided by the telephone company.  
5
6
3. Insert the new battery pack and connect the cord into the  
jack inside the handset.  
GHI  
MNO  
6
Party lines are subject to state tariffs, and therefore, you may not be able to use your own telephone equipment if you  
Thomson multimedia Inc.  
Mail Order Department  
P.O. Box 8419  
Press the TALK button, then press the RE/PA (redial/pause)  
button to redial the last number you called (up to 32 digits).  
PQRS  
TUV  
WXYZ  
RE/PA  
button  
7
9
STORING A NUMBER IN  
MEMORY  
1. Make sure the phone is OFF.  
2. Press the MEM button.  
are on a party line. Check with your local telephone company.  
4
TONE  
OPER  
#
*
Notice must be given to the telephone company upon permanent disconnection of your telephone from your line.  
Rights of the Telephone Company  
4. Put the battery compartment door back on.  
OFF  
ON  
VOL  
MEM  
2
RINGER  
3
5. Place handset in the base to charge. If you don’t charge  
the handset battery properly (for 12 hours) when you first  
set up the phone and/or when you install a new battery  
pack, the battery’s long-term performance will be  
compromised.  
Should your equipment cause trouble on your line which may harm the telephone network, the telephone company shall,  
where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not  
practicable and the circumstances warrant such action, the telephone company may temporarily discontinue service  
immediately. In case of such temporary discontinuance, the telephone company must: (1) promptly notify you of such  
temporary discontinuance; (2) afford you the opportunity to correct the situation; and (3) inform you of your right to bring a  
complaint to the Commission pursuant to procedures set forth in Subpart E of Part 68, FCC Rules and Regulations.  
The telephone company may make changes in its communications facilities, equipment, operations or procedures where  
such action is required in the operation of its business and not inconsistent with FCC Rules and Regulations. If these  
changes are expected to affect the use or performance of your telephone equipment, the telephone company must give  
you adequate notice, in writing, to allow you to maintain uninterrupted service.  
Ronks, PA 17573-8419  
RECEIVING A CALL  
To answer a call, you must press the TALK button before  
you can talk.  
How state law relates to this warranty:  
Name_______________________________________________________  
Address_____________________________________ Apt.____________  
City ________________________State________ ZIP_________________  
Some states do not allow the exclusion nor limitation of incidental or  
consequential damages, or limitations on how long an implied warranty  
lasts so the above limitations or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you also may have other  
rights that vary from state to state.  
BAT LOW indicator  
stays on  
• Place handset in base for 10 seconds to  
reset the phone. If that doesn’t work,  
charge battery for 12 hours.  
3. Dial the number (up to 20 digits).  
TALK  
CHAN  
MUTE  
IN USE BA OW  
MUTE  
T
L
FLASH MUTE  
button button  
1
4. Press MEM.  
RE/PA  
FLASH  
ABC  
JKL  
DEF  
1
4
2
5
8
0
3
FLASH  
5. Press any number key (0-9) to store the phone number  
in that memory location.  
GHI  
MNO  
BATTERY SAFETY PRECAUTIONS  
6
Daytime Phone Number (  
)_______________________________  
PQRS  
TUV  
WXYZ  
Memory Dialing  
doesn’t work  
• Did you program the memory location keys  
correctly?  
• Did you follow proper dialing sequence?  
7
9
Use the FLASH button to activate custom calling services such  
as Call Waiting or call transfer, which are available through  
your local phone company.  
If you purchased your product outside the USA:  
• This warranty does not apply. Contact your dealer for warranty information.  
TONE  
OPER  
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type,  
toxic materials could be released which can cause injury.  
#
INTERFERENCE INFORMATION  
*
OFF  
ON  
DESKTOP INSTALLATION  
VOL  
MEM  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not  
cause harmful interference; and (2) This device must accept any interference received, including interference that may cause  
undesired operation.  
RINGER  
CHANGING A STORED NUMBER  
Use the same procedure to change a stored number as  
you do to store a number— you’re just replacing the  
phone number with a different number.  
• Make sure the tone/pulse setting is  
To reduce the risk of fire or personal injury, use only the battery listed in the User’s  
Guide.  
1. Make sure the mounting bracket is securely fastened.  
2. Set the RINGER switch (on the handset) to ON.  
programmed correctly.  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC  
SERVICE  
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
TIP: If you press the TALK button to activate custom calling  
services such as call waiting, you’ll hang up the phone. Press  
FLASH instead.  
Keep batteries out of the reach of children.  
Remove batteries if storing over 30 days.  
Please make sure that this form has been filled out complet ely.  
RE/PA  
button  
MEM button  
Unit locks up and  
no communication  
between the base  
and the handset  
• If the phone still does not work,  
disconnect the power cord and remove  
the battery pack.Then reconnect the  
power cord and reinstall the battery pack.  
Place handset in the base for 10 seconds  
to allow it to reinitialize.  
• If a power outage occurs while the  
handset is away from the base, the  
handset must be returned to the base  
when the power returns.  
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will  
not occur in a particular installation.  
3. Plug the power supply into the power jack on the back of base and the other end  
into an AC outlet.  
The FCC requires this product to be serviced only by the manufacturer or  
its authorized service agents. In accordance with FCC requirements,  
changes or modifications not expressly approved by ATLINKS USA, Inc.  
could void the users authority to operate this product. For instructions on  
how to obtain service, refer to the warranty included in this Guide or call  
Consumer Information, 1-800-448-0329.  
TALK  
CHAN  
IN USE BA LOW  
T
MUTE  
RE/PA  
FLASH  
MUTE  
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the  
4. Place handset in the base to charge for 12 hours. The CHARGE/IN USE indicator (on  
the base) comes on to indicate that the battery is charging. If you don’t charge the  
handset battery properly (for 12 hours) when you first set up the phone, perfor-  
mance of the battery will be compromised.  
ABC  
JKL  
DEF  
STORING A REDIAL NUMBER  
1. Make sure the phone is OFF.  
2. Press MEM.  
1
4
2
5
8
0
3
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
GHI  
MNO  
6
Reorient or relocate the receiving antenna (that is, the antenna for radio or television that is “receiving” the interference).  
Reorient or relocate and increase the separation between the telecommunications equipment and receiving antenna.  
NOTE: The RBRC seal on the battery used in your ATLINKS  
USA product indicates that we are participating in a program to  
collect and recycle Nickel Cadmium batteries throughout the  
United States. Please call 1-800-8-BATTERY for information or  
contact your local recycling center.  
VOLUME  
The VOL button controls the volume of the handset's  
earpiece.  
PQRS  
TUV  
WXYZ  
7
9
TONE  
OPER  
#
Connect the telecommunications equipment into an outlet on a circuit different from that to which the receiving antenna is  
*
OFF  
ON  
connected.  
VOL  
MEM  
RINGER  
5. Plug the telephone line cord into the TEL LINE jack on the back of the base and into  
a modular phone jack.  
3. Press RE/PA.  
Or refer inquiries to:  
ATLINKS USA, Inc.  
Manager, Consumer Relations  
P O Box 1976  
Indianapolis, IN 46206  
Consult the dealer or an experienced radio/TV technician for help.  
If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician  
for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and  
Resolve Radio/TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, D.C.  
20402. Please specify stock number 004-000-00345-4 when ordering copies.  
4. Press MEM.  
6. Raise the base antenna.  
RINGER SWITCH  
The handset ringer switch can be set to ON or OFF. If the  
switch is off, the unit will not ring.  
5. Press any number key (0-9) to store the phone number in that memory location.  
VOL button  
RINGER–  
ON OFF  
switch  
NOTE: The phone automatically defaults to touch-tone dialing. To change to pulse  
(rotary) dialing, see “Tone/Pulse Dialing.” If you don’t know which type of service you  
have, check with the phone company.  
HEARING AID COMPATIBILITY  
Attach your sales receipt to the booklet for future reference or jot down  
the date this product was purchased or received as a gift.This information  
will be valuable if service should be required during the warranty period.  
This telephone system meets FCC standards for Hearing Aid Compatibility.  
FCC NUMBER IS LOCATED ON THE CABINET BOTTOM  
REN NUMBER IS LOCATED ON THE CABINET BOTTOM  
CAUTION: Use only the ATLINKS USA 5-2501(black) or 5-2514( white) power  
supply that came with this unit. Using other adapters may damage the unit.  
Purchase date ____________________________  
Name of store____________________________  
ATLINKS USA, Inc.  
Model 27600A  
10330 North Meridian Street  
15644590 (Rev. 2 E/S)  
Indianapolis, IN 46290  
01-21  
© 2001 ATLINKS USA, Inc.  
Printed in China  
Trademark(s) ® Registered  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marca(s) Registrada(s)  

Q Logic Switch 5000 9000 User Guide
Radio Shack Cordless Telephone ET 542 User Guide
RCA Portable DVD Player DRC97383 User Guide
Redring Water Dispenser CD RW901SL User Guide
Remington Electric Shaver R 9190 User Guide
RIDGID Saw R3203 1 User Guide
Saeco Coffee Makers Coffeemaker HD8836 User Guide
Sakar Binoculars VIV CS 735 User Guide
Sanyo Air Conditioner C3032 User Guide
Sanyo Projector PLC XF47A User Guide