flat panel solutions
LCD TV Wall Mount
Installation Manual
MAF121BKR
Tools Required
Phillips Head Screw Driver
Ratchet or Driver with 1/2” (13 mm) Socket
Electric Drill
1/4” (6 mm) Drill Bit and Stud Finder for Drywall Installation
7/16” (11 mm) Masonry Bit for Concrete Installation
Warnings
1. Make sure these instructions are read and thoroughly understood before
attempting installation. If you are unsure of any part of this installation, contact a
professional installer for assistance.
2. The wall or mounting surface must be capable of supporting the combined
weight of the mount and the display; otherwise the structure must be reinforced.
3. Safety gear and proper tools must be used. Failure to do so can result in
property damage and/or serious injury.
4. A minimum of two people are required for this installation. Do not attempt to
install this mount alone under any circumstance.
5. Follow all instructions and recommendations regarding adequate ventilation and
suitable locations for mounting your display. Consult the owner‘s manual for your
display for more information.
CAUTION:
This wall mount is intended for use only with the maximum weight of
36 kg/80 lbs. Use with heavier than the maximum weights indicated may result in
instability causing possible injury. Follow the installation and operation instructions
carefully.
Hardware Kit
Bag#
(Ref) Item (Qty)
(A) M4x12 Bolt (x4)
(B) M4x30 Bolt (x4)
1
(C) M4 Lock Washer (x4)
(D) M5x12 Bolt (x4)
(E) M5x30 Bolt (x4)
2
3
(F) M5 Lock Washer (x4)
(G) M6x12 Bolt (x4)
(H) M6x35 Bolt (x4)
(I) M6 Lock Washer (x4)
(J) M8x16 Bolt (x4)
(K) M8x40 Bolt (x4)
4
(L) M8 Lock Washer (x4)
Download from Www.Somanuals.com. All Manuals Search And Download.
Part 2 - Attaching the Arms to the
Display
Important! Use extra care during the part of the installation. If possible, avoid
placing your display facedown as it may damage the viewing surface.
Note: Your mount comes with a selection of bolt diameters and lengths to
accommodate a wide variety of display models. Not all of the hardware
in the kit will be used.
1. Determine the correct length of bolt to use with your display by first
examining the back of your display.
A. If your display has a flat back, you will use one of the shorter bolts (A, D,
G, or J) from the hardware kit.
B. If your display has a curved or recessed back, you will use one of the
longer bolts (B, E, H, or K) along with a spacer (M or N).
2. Determine the correct diameter of bolt to use by
Fig. 2
carefully trying one bolt each from Bags 1 - 4 of
the hardware kit. Do not force any of the bolts –
if you feel resistance stop immediately and try a
smaller diameter bolt.
3. Attach the arms to the back of your display
using the bolts identified in Steps 1 and 2 along
with the corresponding Lock Washer (C, F, I, or
L) (see Fig. 2 and 3).
A. If you are using the M4, M5, or M6 bolts
(Bags 1, 2, and 3 respectively), you will also
need to use the M6 Washers (O).
B. If you are using one of the longer bolts on
a display with a curved or recessed back, you
will also use a Spacer (M or N). Use the Smaller
Spacer (M) for M4 and M5 bolts and the Large
Spacer (N) for M6 and M8 bolts.
4. Make sure all screws are secure, but
do not over-tighten them.
Fig. 3
For displays with curved or
recessed backs
For displays with flat backs...
Part 3 - Final Installation and Adjustment
1. With the help of another
person, carefully lift your
display and place it on mount
Fig. 4
(see Fig. 4). Place the display
in the middle of the mount,
and do not release the display
until the mounting arms have
securely hooked onto the
crossbars.
2. Important! Move the safety
tab located on each arm into
position to avoid having the
display accidentally lifted from
Fig. 5
Fig. 6
the mount. A padlock can be
inserted into one of the tabs
to help prevent theft of your
display (see Fig. 5).
3. Use the cable management
hooks to help keep your power
cord and other cables in order.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Side-to-side and front-to-back
adjustments can be made by
firmly grasping your display
and carefully moving it to the
desired position.
Fig. 7
5. If any of the arms become
too lose to hold their position,
they can be tightened using
the Alley Key provided in your
hardware kit (see Fig. 6).
6. To adjust the tilt position of your display, have one person hold the display
in place while another person loosens the two tilt adjustment knobs located
on either side of the mount (see Fig. 7). Once the knobs are loose, move the
display to the desired angle. Tighten the knobs securely before releasing the
display. NOTE: The tilt adjustment knobs have a ratchet feature. If you need
to change the position of the knob without tightening or loosening the screw,
simply pull the knob out before moving it.
Limited Lifetime Warranty
Audiovox Electronics Corporation (the “Company”) warrants to you the original
retail purchaser of this product that should it, under normal use and conditions,
be proven defective in material or workmanship during its lifetime while you own
it, such defect(s) will be repaired or replaced (at the Company’s option) without
charge for parts and repair labor. To obtain repair or replacement within the terms
of this Warranty, the product is to be delivered with proof of warranty coverage
(e.g. dated bill of sale), specification of defect(s), transportation prepaid, to the
Company at the address shown below. Do not return this product to the Retailer.
This Warranty does not cover product purchased, serviced or used outside the
United States or Canada.
This Warranty is not transferable and does not extend to costs incurred for
installation, removal or reinstallation of the product. This Warranty does not apply
if in the Company’s opinion, the product has been damaged through alteration,
improper installation, mishandling, misuse, neglect, or accident. THE EXTENT
OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE
REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE
COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER
FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION
OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY BE LIABLE FOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. No person
or representative is authorized to assume for the Company any liability other
than expressed herein in connection with the sale of this product. Some states/
provinces do not allow limitations on how long an implied warranty lasts or
the exclusion or limitation of incidental or consequential damage so the above
limitations or exclusions may not apply to you. This Warranty gives you specific
legal rights and you may also have other rights which vary from state/province to
state/province.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd.,
Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door
16, Mississauga, Ontario L5T 3A5
Trademark(s) Registered
All other brands and product names are trademarks or registered trademarks of
their respective owners.
© 2011 Audiovox Accessories Corporation
MAF121BKR_US_IB_00
Download from Www.Somanuals.com. All Manuals Search And Download.
|