RCA TV Cables EZ300HD User Guide

v2.0 (EN)  
Viewing videos on TV  
Recording quality  
Turn on/off  
Play  
Setting date and time  
1. Press or to shift among month, date, hour and minute and press + or to set the  
date/time values.  
2. Press or to select DONE and then press the red RECORD button to save settings. Or  
press DELETE to exit without saving.  
LCD screen  
For self recordings, the lens can be  
rotated 180o.  
1. Plug in the AV cable (provided) – Insert the single connector  
end into the camcorder (AV jack) and connect the double  
connector ends to the corresponding video (yellow) and audio  
(white) input jacks on the TV. (TV output standard: NTSC)  
1. Press ON/OFF to turn on.  
2. Press and hold ON/OFF to turn off.  
1. Press PLAY/PAUSE to start playback of the most recent recording or the selected video.  
To select another video, refer to Selecting videos.  
2. Press and hold PLAY/PAUSE for three seconds to play all videos.  
Settings  
Quality  
HD  
Approx. recording duration*  
60 minutes  
QuickStartGuide  
EZ300HD RCA Small Wonder Camcorder  
Camcorder will automatically turn off after 2 minutes if not in use.  
HD (High Definition mode)  
HQ (High Quality mode)  
webQ (Web Quality mode)  
If no video is selected after playback has finished, recording mode will resume after 5 seconds.  
DVD  
120 minutes  
Video quality selector  
For best output quality, use the HDMI connector at the  
bottom of the camcorder with an HDMI cable (not included).  
Date and time setting can be accessed by pressing and holding PLAY/PAUSE and ON/OFF  
together while the camcorder is turned off.  
Refer to Recording Quality for more information.  
Search forward/backward:  
Good  
360 minutes  
Congratulations on purchasing your new RCA High Definition Small Wonder Camcorder.  
Please read these instructions for quick tips on using the product.  
Hold down to fast forward the selected video during playback.  
Hold down to fast rewind the selected video during playback.  
2. Turn on the TV and the camcorder.  
3. Switch the TV to the selected video input (refer to your TV manual for instructions).  
4. You may play and delete videos viewed on the TV by using the camcorder buttons.  
The selected setting (HD, HQ or webQ) appears on the display screen during recording.  
The HD setting is recommended when planning to view video on a TV directly from the  
camcorder.  
Record  
Using your camcorder  
Press and release the red RECORD button (after  
“READYappears on the screen) to begin recording.  
Getting started  
Pausing video playback:  
Microphone  
Charging the battery  
* Recording duration is based on 2 GB internal memory. Actual recording capacity depends on type of video content being recorded.  
Press PLAY/PAUSE to pause playback (a pause indicator II and the remaining playback  
time flash at the top left corner of the screen).  
Please charge the battery for at least 3 hours before first use. The battery can only be charged  
with the supplied battery charger. Refer to Battery charger on the back of this guide for more  
information.  
Recording videos to VHS tape or DVD  
While recording:  
1. Plug in the AV cable (provided) – Insert the single connector end into the camcorder and  
connect the double connector ends to corresponding video (yellow) and audio (white)  
inputs of the recording device (VHS or DVD recorder).  
A red and the elapsed time appears at the top  
left corner of the screen.  
Press PLAY/PAUSE again to resume playback.  
USB Connector ARM  
Recording  
indicator  
Extending the USB Connector ARM:  
1. Press down on the USB Connector ARM  
button.  
The red recording light on the camcorder front  
turns on.  
Selecting videos:  
Battery and memory card installation  
1. Slide the cover down and then lift up to open.  
2. Install the rechargeable lithium battery.  
For best output quality, use the HDMI connector at the bottom of the camcorder with an  
HDMI cable (not included).  
Bottom view  
Press and release to cue the next video.  
Press and release to cue the previous video.  
2. Slide out to extend the Connector ARM.  
2. Turn on the camcorder and the recording device.  
3. Switch recording device to the video input connected to the camcorder. (Refer to your  
user manual of the recording device for instructions).  
Pausing a recording:  
Refer to “Connecting to a PC” for more information.  
Use USB Extension Cable (provided) if USB Connector ARM is  
obstructed or space does not permit connection to PC.  
To retreat the ARM, press down on the USB Connector ARM  
button and slide in.  
Lens  
2
Make sure you insert the battery correctly as indicated.  
1
Press PLAY/PAUSE.  
Delete  
In the case of low battery, a low battery icon (  
flashing.  
) will flash on the screen. Please recharge the battery when battery icon is  
A pause indicator II replaces the red at the top  
left corner and “Recording Paused” flashes in the  
middle of the screen.  
1. Press DELETE and the last recording and “DELETE VIDEO ?” appear on the screen.  
4. Start recording of your recording device and press and hold PLAY/PAUSE on the  
To select another video, refer to Selecting videos.  
3. Your camcorder has 2 GB internal memory. To boost the memory, install an SD memory  
card. Align card with Card Symbol on camcorder and slide in until a click is heard. The card  
icon ( ) appears on the screen with memory card inserted.  
camcorder for 3 seconds to play all videos on the camcorder.  
2. Press and hold DELETE until the selected video is deleted.  
Macro mode  
To resume recording, press and release PLAY/  
PAUSE again.  
3. To delete all videos, press & hold DELETE for 3 seconds and then repeat step 2.  
Select the flower icon to  
take close-up shots  
AV output  
When the internal memory is full, recording will stop. Press the record button again to begin recording to the SD card.  
To remove card, push card in until a click is heard and the card will pop out slightly, then remove the card.  
HDMI video output  
Lift up the cover to show the  
connector.  
Tripod screw  
mount  
Audio/Video output for connecting to TV or  
other AV equipment with the included AV cable.  
Take photo  
4. Push the cover down and slide up to close.  
Stop  
Press and release PHOTO to take photo (photo resolution: 5.0 mega pixels).  
Refer to “Viewing videos on TV” and “Recording videos to VHS  
tape or DVD” for more information.  
While playing or recording, press and release the red  
RECORD button to stop the playing or recording.  
Right view  
2
1
3
4
Back view  
Zoom  
Volume  
During playback:  
Battery and memory card cover  
Before or during recording:  
Front view  
Audio speaker  
Hand strap hole  
Press + to zoom in.  
Press to zoom out.  
Press + to increase volume.  
Press to decrease volume.  
Back view of  
the battery  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radica Games Games I6002 User Guide
Reliable Sewing Machine MSK 755H User Guide
Renesas Network Card M30620T CPE User Guide
Ricoh Printer 1764 User Guide
Roadmaster Car Stereo System VR500CS BT User Guide
Ruby Tech Switch FGS 2824 User Guide
Samsung Washer Dryer BFW36W User Guide
Sanyo Projector PLC XW56 User Guide
Sennheiser Air Cleaner 300 IEM G2 User Guide
Sennheiser Corded Headset CC540 User Guide