RCA Projection Television HDTV DVD Monitor User Guide
HDTV/DVD Monitor User’s Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Information  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A  
grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided  
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the  
apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
If an outside antenna is connected to the TV receiver, be sure the antenna system is  
grounded so as to provide some protection against voltage surges and built up static  
charges. In the U.S. Section 810-21 of the National Electrical Code and in Canada, Part  
Example of Antenna Grounding as per  
(NEC) National Electrical Code  
ANTENNA  
LEAD IN  
WIRE  
1 of the Canadian Electrical Code provides information with respect to proper  
GROUND CLAMP  
grounding of the antenna system. See the figure on the right for details.  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
ELECTRIC SERVICE  
POWER SERVICE GROUNDING  
EQUIPMENT  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
To assure adequate ventilation for this product, maintain  
a spacing of 4 inches from the top and sides of the TV  
receiver and 2 inches from the rear of the TV receiver  
and other surfaces.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Key Features Overview  
Your TV is equipped with features that will add to your TV viewing experience. The following information  
summarizes a few of these features. Chapter 4 provides more information about the rest of the TV’s features and  
how to use them.  
DVI-HDTV Input  
Lets you connect an HD receiver with a DVI output.  
L/MONO  
•
DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for high-  
DVI-HDTV  
bandwidth digital connection. It supports the overlay of high-resolution graphics needed by some  
electronic program guide navigation and other interactive services. DVI, when combined with HDCP (High  
bandwidth Digital Content Protection) technology, creates a protected digital connection. The signal  
speed of the DVI connection is 1080i for HDTV at a rate of 1.78 Gigabits per second.  
R
Dolby* Virtual  
Available only for stereo signals. Creates a virtualized surround sound experience from two speakers using  
the Dolby Pro Logic decoding. It provides the sensation of being surrounded by additional speakers.  
PIP (Picture-In-Picture) and POP (Picture-Outside-Picture)  
Description: PIP lets you watch two channels at one time — one channel on the main screen and the other  
in a smaller window. POP also lets you watch two channels at one time- one channel on the left side of the  
screen (the main picture) and the other on the right.  
Requirements: Press the PIP button to bring up the PIP window. Press again to bring up POP. Chapter 4 has  
detailed instructions on how to use the PIP and POP features.  
PIP example  
POP example  
MP3 Audio Disc Playback  
Description: Your DVD player can play back compatible MP3 audio files recorded on CD-R discs.  
Requirements: The discs must be recorded on compatible equipment (Chapter 3 has details) and the DVD  
player must be on.  
The On-Screen DVD Information Display  
Description: The Info Display is a menu bar that you can bring up to access certain features while discs are  
playing. Icons represent the different features supported by your TV/DVD when in DVD mode. By selecting  
different Info Display icons, you can access features including Repeat, Audio, Subtitles, Bookmarks and  
Camera Angle.  
Requirements: Put your TV/DVD in DVD mode and insert a disc into the disc tray. Wait for the disc to play,  
then press INFO to view the Info Display menu.  
V-Chip: Parental Controls  
Description: You can block programs and movies by content, age-based ratings, and/or movie ratings.  
Requirements:  
•
•
Set up the Parental Control menu in the TV’s main menu (Chapter 4 has details).  
The broadcasters must use the rating system when they send the program to your TV in order for your TV  
to block the program.  
•
Parental controls must be locked for these settings to take affect.  
* Dolby is a trademark of Dolby Laboratories  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
IMPORTANT SAFETY INSTRUCTIONS................1  
How to Use the Remote After You’ve  
Programmed It ..............................................16  
Introduction  
Remote Control Codes ............................................. 16  
Chapter 3: Playing DVDs  
Key Features Overview............................................... 2  
DVI-HDTV Input .............................................2  
Dolby* Virtual ...................................................2  
PIP (Picture-In-Picture) and POP  
Regional Coding ....................................................... 18  
Using Different Menus ............................................ 18  
Loading and Playing Discs ....................................... 18  
To Load and Play a Disc ..................................18  
Using a Disc Menu ................................................... 18  
(Picture-Outside-Picture) ................................2  
MP3 Audio Disc Playback .................................2  
The On-Screen DVD Information Display ........2  
V-Chip: Parental Controls .................................2  
Using the On-Screen Info Display .......................... 18  
Time Display ....................................................19  
Selecting a Title ...............................................19  
Selecting a Chapter.........................................19  
Selecting Subtitles...........................................19  
Changing the Audio Language......................20  
Using the Repeat Feature...............................20  
Using Bookmarks ............................................21  
Changing the Camera Angle..........................21  
Chapter 1: Connections & Setup  
Things to Consider Before You Connect .................. 5  
Protect Against Power Surges ..........................5  
Protect Components from Overheating ..........5  
Position Cables Properly to Avoid Audio  
Interference.....................................................5  
Important Stand and Base Safety  
Information .....................................................5  
Use Indirect Light ..............................................5  
Cables Needed to Connect Components to  
Your TV ............................................................5  
Chapter 4: Using the TV’s Features  
Channel Banner ........................................................ 22  
Choose Your Connection............................................ 6 Why You Should Use the Autotuning Feature ...... 22  
How to Set Up the Autotuning Feature ........22  
Parental Controls and V-Chip ................................. 23  
How V-Chip Works ..........................................23  
V-Chip TV Rating .............................................23  
Blocking Specific Content Themes .................24  
Viewing Specific Content Themes..................25  
V-Chip Movie Rating Limit .............................25  
V-Chip Unrated Program Block ......................25  
Lock/Unlock Parental Controls .......................25  
Front Panel Block ............................................25  
PIP (Picture-in-Picture) and POP  
TV/DVD + HD Receiver + VCR................................... 7  
TV/DVD + Satellite Receiver + VCR.......................... 8  
TV/DVD + VCR ............................................................ 9  
TV/DVD+ A/V Receiver or Speakers........................ 10  
Explanation of Jacks.................................................11  
The Front of Your TV/DVD....................................... 12  
Front Inputs .....................................................12  
Front Panel Buttons ........................................12  
Put batteries in the remote..................................... 12  
Turn on the TV/DVD ................................................. 12  
(Picture-outside-Picture) Operation ................... 26  
PIP and POP Buttons .......................................26  
Complete the Initial Setup ...................................... 12  
Set the Menu Language .................................13  
Complete Auto Channel Search .....................13  
Changing Lists and Labels ..............................13  
Auto Convergence ..........................................13  
Chapter 5: Using the DVD Menu  
The DVD’s Menu System.......................................... 27  
The Play/Resume Play Option.................................. 27  
Chapter 2: Using the Remote Control  
The Play Mode Menu ............................................... 27  
Selecting a Play Mode ....................................27  
How to Create a Program ..............................27  
Editing a Program ...........................................28  
Deleting Chapters ...........................................28  
AutoPlay ..........................................................28  
Dub Assist ........................................................28  
IntroScan .........................................................28  
The Buttons on the Remote Control ...................... 14  
Using the INPUT Button .................................15  
Programming the Remote to Operate Other  
Components............................................................ 15  
Find Out If You Need to Program the  
Remote ..........................................................15  
Programming the Remote..............................15  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
The Lock Menu ......................................................... 28  
Locking Your DVD ...........................................29  
Unlocking Your DVD .......................................29  
Changing Your Password................................29  
Setting the Ratings Limits ..............................29  
Unrated Titles ..................................................30  
System Test ......................................................30  
The Display Menu ..................................................... 30  
TV Image .........................................................30  
On-Screen Displays..........................................30  
Chapter 8: Other Information  
Troubleshooting........................................................ 40  
Care and Cleaning .................................................... 43  
Handling Cautions ..........................................43  
Formation of Condensation ...........................43  
Limited Warranty ..................................................... 44  
Accessories................................................................ 45  
The Sound Menu ...................................................... 31  
Digital Output .................................................31  
Sound Logic .....................................................31  
The Languages Menu ............................................... 31  
Changing the Player Menus, Disc Menus,  
Audio or Subtitles Language Preferences ...31  
Glossary ..................................................................... 32  
Code List ................................................................... 32  
Chapter 6: Using the TV’s Menu System  
Sound Menu.............................................................. 33  
Picture Menu ............................................................ 33  
Channel Guide Menu ............................................... 34  
Time Menu ................................................................ 34  
Parental Control Menu ............................................ 34  
PIP Menu ................................................................... 34  
Setup Menu .............................................................. 35  
Chapter 7: Information Displays  
Using the Info Display.............................................. 36  
Audio CD Info Display.....................................36  
MP3 Info Display .............................................36  
Video CD Info Display .....................................36  
Using the Time Display ...................................36  
Selecting a Specific Track ................................36  
Selecting a Specific Index ...............................37  
Selecting a Play Mode ....................................37  
Using the Program Play Feature ....................37  
Editing a Playlist..............................................38  
Using the Repeat Feature...............................38  
A•B Repeat ......................................................38  
Changing the Audio Channel Output ...........38  
Using IntroScan ...............................................39  
Using Bookmarks ............................................39  
Dub Assist ........................................................39  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1: Connections & Setup  
Things to Consider Before You Connect  
Protect Against Power Surges  
•
•
•
Connect all components before you plug any of their power cords into the wall outlet.  
Turn off the TV and/or component before you connect or disconnect any cables.  
Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions on page 1.  
Protect Components from Overheating  
•
•
•
•
Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.  
Don’t stack components.  
When you place components in a stand, make sure you allow adequate ventilation.  
If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow around  
other components.  
Position Cables Properly to Avoid Audio Interference  
•
Insert each cable firmly into the designated jack.  
•
If you place components above the TV, route all cables down the side of the back of the TV instead of straight  
down the middle of the TV.  
•
If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables away from  
audio/video cables.  
Important Stand and Base Safety Information  
Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to  
prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or  
damage the TV. Refer to the Important Safety Instructions on page 1.  
Use Indirect Light  
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting.  
Cables Needed to Connect Components to Your TV  
The pictures below show the cables needed for the connections represented in this book.  
Audio/Video cables  
Component Video (Y•Pb•Pr)  
cables  
Coaxial cable  
S-Video cable  
Chapter 1  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Choose Your Connection  
There are several ways to connect your TV/DVD. Please use the following chart to determine which connection is  
best for you. Proceed to the appropriate page and connect your TV/DVD.  
Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to  
install your electronic entertainment system and to instruct you in its operation. For details about this service, call 1-888-206-3359  
or visit rcascenium.com.  
Components  
Cables  
Needed  
Connection  
Title  
Go to...  
Coaxial  
page 7  
TV/DVD +  
HD Receiver + VCR  
Audio/video  
Component video  
Coaxial  
TV/DVD + Satellite page 8  
Receiver + VCR  
Audio/video  
S-Video  
TV/DVD + VCR  
Coaxial  
page 9  
Audio/video  
Component video  
For general information on connecting an A/V receiver or speakers to your TV/DVD, go to page 10.  
6
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
CABLE  
O
R
OFF-AIR ANTENNA  
1A  
HD RECEIVER  
S-VIDEO  
VIDEO  
PB  
PR  
L
R
Y
AUDIO  
L
R
ANT OUT  
ANT IN  
SAT IN  
PB  
P
R
L
R
Y
2A  
1B  
2B  
3B  
Satellite Receiver  
P
B
PR  
MON
R
Y
DIGITAL  
TV/DVD  
AUDIO  
OUTPUT  
LMONO  
DVIHDTV  
R
EXT/INT  
+
+
P
B
PR  
L/MONO  
R
Y
COMPONENT INPUTS  
LEFT  
RIGHT  
EXTERNAL SPEAKERS  
3A  
COMPOSITE INPUTS  
AUDIO/VIDEO OUTPUT  
FIXED AUDIO  
V
V
L/MONO  
R
R
3C  
V
L
R
ANTEN/  
CAB
VARIABLE  
AUDIO  
SUBWOOFER  
L
R
L/MNO  
4A  
4C  
DEO  
L
AUD
R
VCR  
IN  
4B  
OUT  
L
UDIO  
VIE
ANTENNA IN  
NA OUT  
TV/DVD + HD Receiver + VCR  
1. Make sure cable or antenna and/or satellite is connected to your VCR.  
A. Connect the coaxial cable from your cable outlet or antenna to the antenna input on the HD Receiver.  
B. Connect the satellite dish antenna to the satellite input on the HD Receiver.  
2. Connect your HD Receiver to your TV/DVD.  
A. Connect the audio (white and red) cables to the CMP1 L/MONO and R audio jacks on the back of the TV/DVD and to the Audio Output jacks on  
the HD Receiver.  
B. Connect three video grade cables to the CMP1 Y, PB, PR jacks on the back of the TV/DVD and to the Y, PB, PR jacks on the HD Receiver.  
Notes: The Y, PB, PR jacks are sending the digital cable signal to the TV/DVD.  
If your HD Receiver has a DVI output, connect the HD Receiver to your TV /DVD using a DVI cable. Make sure to connect the left and right audio cables to the DVI L/MONO and R  
jacks on the TV/DVD.  
3. Connect your HD Receiver to your VCR.  
A. Connect a coaxial cable to the HD Receiver’s antenna output and to VCR’s antenna input.  
B. Connect the audio (white and red) cables to the Audio Output jacks on the HD Receiver and to the Audio Input jacks on the VCR.  
C. Connect the video cable to the Video Output jack on the HD Receiver and to the Video Input jack on the VCR.  
4. Connect your VCR to your TV/DVD.  
A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV/DVD.  
B. Connect the audio (white and red) cables to the VID2 L/MONO and R audio jacks on the back of the TV/DVD and to the Audio Output jacks on  
the VCR.  
C. Connect the video cable to the VID2 V (video) jack on the back of the TV/DVD and to the Video Output jack on the VCR.  
Go to page 13  
Chapter 1  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
SATELLITE  
RECEIVER  
VIDEO  
L
AUDIO  
R
S-VIDEO  
3A  
3C  
P
B
P
R
L/MONO  
R
Y
DIGITAL  
AUDIO  
OUTPUT  
TV/DVD  
L/MONO  
DVI-HDTV  
R
EXT/INT  
+
+
P
/MONO  
R
Y
3B  
COMPUTS  
LEFT  
RIGHT  
EXTERNAL SPEAKERS  
COMPOSE INTS  
AUDIO/VIDEO OUTPUT  
FIXED AUDIO  
V
L/MONO  
R
R
V
L
R
ANTEN
CABLE  
VARIABLE  
AUDIO  
L/MNO  
SUBWER  
L
R
V
1A  
1B  
1C  
VIDEO  
L
AUDIO  
R
VCR  
IN  
CABLE  
OUT  
O
R
L
R
AUDIO  
VIDEO  
ANTENNA IN  
ANTENNA OUT  
OFF-AIR ANTENNA  
2
TV/DVD + Satellite Receiver + VCR  
1. Connect your VCR to your TV/DVD.  
A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV/DVD.  
B. Connect the audio (white and red) cables to the VID2 L/MONO and R Audio jacks on the back of the TV/DVD and to the Audio Output jacks on  
the VCR.  
C. Connect the video cable to the VID2 V (Video) jack on the back of the TV/DVD and to the Video Output jack on the VCR.  
2. Make sure cable or antenna is connected to your VCR.  
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.  
3. Connect your Satellite Receiver to your TV/DVD.  
A. Connect the audio (white and red) cables to the VID1 L/MONO and R Audio jacks on the back of the TV/DVD and to the Audio Output jacks on  
the Satellite Receiver.  
B. Connect the video cable to the VID1 V (Video) jack on the back of the TV/DVD and to the Video Output jack on the Satellite Receiver.  
C. If your Satellite Receiver has an S-Video jack, connect an S-Video cable (instead of the video cable in step B) to the S-VIDEO jack on the  
TV/DVD and to the S-VIDEO jack on the satellite receiver.  
Go to page 13  
8
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
P
B
P
R
L/MONO  
L/MONO  
R
Y
DIGITAL  
AUDIO  
OUTPUT  
TV/DVD  
L/MONO  
R
DVI-HDTV  
EXT/INT  
+
+
PB  
PR  
R
Y
COMPONENT INPUTS  
LEFT  
RIGHT  
EXTERNAL SPEAKERS  
COMPOSITE INPUTS  
AUDIO/VIDEO OUTPUT  
FIXED AUDIO  
V
V
L/MONO  
L/MO  
R
R
R
V
L
ANTEN
CABLE  
VARIABLE  
AUDIO  
R
SUBWR  
L
1A  
1B  
1C  
VIDEO  
L
AUDIO  
R
VCR  
IN  
CABLE  
OUT  
O
R
L
R
AUDIO  
VIDEO  
ANTENNA IN  
ANTENNA OUT  
OFF-AIR ANTENNA  
2
TV/DVD + VCR  
1. Connect your VCR to your TV/DVD.  
A. Connect a coaxial cable to the VCR’s antenna output and to the ANTENNA/CABLE Input jack on the TV/DVD.  
B. Connect the audio (white and red) cables to the VID2 L/MONO and R Audio jacks on the back of the TV/DVD and to the Audio Output jacks on  
the VCR.  
C. Connect the video cable to the VID2 V (Video) jack on the back of the TV/DVD and to the Video Output jack on the VCR.  
2. Make sure cable or antenna is connected to your VCR.  
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.  
Go to page 13  
Chapter 1  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
TV/DVD+ A/V Receiver or Speakers  
These are two different ways your TV/DVD uses a component to hear audio.  
1. Connect audio cables to either the FIXED or VARIABLE AUDIO L and R OUTPUT jacks and to the Audio Inputs on the A/V receiver.  
•
FIXED provides fixed-level audio output from the TV/DVD. This audio output is ideal for connecting to an A/V receiver that has its own  
volume control.  
•
VARIABLE provides variable-level audio output. Volume levels can be controlled by the volume controls on the TV/DVD and TV remote  
control.  
-OR-  
2. Use speaker wire to connect the TV/DVD to external speakers.  
•
The EXT/INT switch beside the jacks let you turn the TV/DVD’s internal speakers on or off. If you connect external speakers, slide the  
switch to EXT so the audio is sent to the external speakers only. Choosing INT sends the audio to the TV/DVD’s speakers only.  
Note: The external speaker rating is 8 ohms with 15 watts power handling capabilities.  
A/V RECEIVER  
VCR  
CD  
IN  
TAPE  
TV  
IN  
IN  
OUT  
IN  
OUT  
R
L
Connect to either FIXED or  
VARIABLE Output  
1
P
B
P
R
L/MONO  
L/MONO  
R
Y
DIGITAL  
AUDIO  
OUTPUT  
TV/DVD  
L/MONO  
R
DVI-HDTV  
EXT/INT  
+
+
P
B
PR  
R
Y
COMPONENT INPUTS  
LEFT  
RIGHT  
EXTERAL SPAKERS  
COMPOSITE INPUTS  
AUDIO/VIDEO OUTPU
FIXED AO  
V
V
L/MONO  
L/MONO  
R
R
V
L
ANTENNA/  
CABLE  
VARIABLE  
AUDIO  
SUBWOOFER  
L
R
2
10  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Explanation of Jacks  
This section describes the jacks you can use to make connections. There are several ways to connect components to your TV/DVD.  
DIGITAL AUDIO OUTPUT Lets you connect a Dolby Digital receiver to your TV/DVD, if your receiver has an  
optical input. Use an optical cable (or SPDIF cable) to connect your TV/DVD to the receiver for theatre-quality  
sound. Go to page 30 for more information on digital audio.  
Note: This TV/DVD’s OPTICAL DIGITAL OUT jack fully complies with the international standard governing this type of jack  
(IEC958), and is designed for connection to a Dolby Digital (AC-3® or PCM) receiver or Dolby Digital (AC-3 or PCM) decoder. Older  
equipment, some of which is not fully compliant with IEC958, may not be compatible with the Dolby Digital bitstream. Such a  
connection using anything other than Dolby Digital AC-3 or PCM receiver or decoder could create a high noise level, causing  
damage to headphones or speakers.  
DVI-HDTV Input Lets you connect an HD receiver with a DVI output.  
•
DVI (Digital Visual Interface) Provides an uncompressed, digital video interface developed for high-  
bandwidth digital connection. It supports the overlay of high-resolution graphics needed by some  
electronic program guide navigation and other interactive services. DVI, when combined with HDCP (High  
bandwidth Digital Content Protection) technology, creates a protected digital connection. The signal speed  
of the DVI connection is 1080i for HDTV at a rate of 1.78 Gigabits per second.  
L/MONO  
R
DVI-HDTV  
•
•
L/MONO (Audio) Provides left audio connection when using the DVI jack. The left audio connector is  
usually white.  
R (Audio) Provides right audio connection when using the DVI jack. The right audio connector is usually  
red.  
Note: Remember to connect the left and right audio cables because the DVI cable carries only the picture signal, not the sound.  
COMPONENT INPUTS Lets you connect a component video source, such as a DVD player.  
PB  
P
R
L/MONO  
R
Y
•
CMP1 Y, PB, PR (Component Video) Provides optimum picture quality because the video is separated into  
three signals. Use three video-grade cables for the connection. When using CMP1 Y, PB, PR, make sure to  
connect left and right audio cables to the CMP1 L/MONO and R Audio Input jacks.  
•
•
•
CMP1 L/MONO (Audio) Provides left audio connection. The left audio connector is usually white.  
P
B
P
R
L/MONO  
R
Y
CMP1 R (Audio) Provides right audio connection. The right audio connector is usually red.  
COMPONENT INPUTS  
CMP2 Y, PB, PR, and L/MONO and R Audio Allows you to connect a second component video source.  
Their description is the same as CMP1 above. When using CMP2 Y, PB, PR, make sure you connect the left  
and right audio cables to the CMP2 Audio jacks.  
COMPOSITE INPUTS Lets you connect another component such as a VCR, DVD player, or laserdisc player. Its  
COMPOSITE INPUTS  
AUDIO jacks are the same as described for CMP1 above.  
L/MONO  
L/MONO  
V
V
R
R
•
VID1 S-VIDEO Provides better picture quality than the video jacks (VID1 and 2 Video) because the color  
part of the signal is separated from the black and white part of the picture. When using VID1 S-VIDEO,  
make sure to connect left and right audio cables to the VID1 L/MONO and R Audio Input jacks.  
•
•
VID1 V (Video) Provides composite video connection. The video connector is usually yellow.  
VID2 S-VIDEO, V and L/MONO and R Audio Allows you to connect a component such as a VCR, DVD  
player, or laserdisc player. Their description is the same as VID1 above.  
Note: Do not connect an S-Video and Video cable at the same time in either VID1 or VID2 jacks.  
AUDIO/VIDEO OUTPUTS Lets you connect an amplifier or audio receiver for improved sound quality or an  
AUDIO/VIDEO OUTPUT  
external video monitor.  
FIXED AUDIO  
R
L
V
•
•
•
FIXED AUDIO L/R Provides fixed-level audio output from the TV/DVD. This audio output is ideal for  
connecting to an A/V receiver when you want to control the volume through the A/V receiver.  
VARIABLE  
AUDIO  
VARIABLE AUDIO Provides variable-level audio output. Volume levels are controlled by the volume  
controls on the TV/DVD and remote control.  
R
L
SUBWOOFER  
SUBWOOFER Provides lower bass audio frequencies out from the TV/DVD and to a subwoofer.  
Note: If you’ve connected a subwoofer, make sure you set the External Subwoofer option in the Sound menu. Go to page 33 for  
instructions.  
EXTERNAL SPEAKERS  
•
Right and Left Speaker Terminals Let you connect external left and right speakers to the TV/DVD to  
receive left and right sound.  
•
EXT/INT (switch) Lets you turn the TV/DVD’s internal speakers on or off. EXT sends audio to external  
speakers only. INT sends audio to the TV/DVD’s internal speakers only.  
EXT/INT  
+
+
ANTENNA/CABLE Lets you connect a coaxial cable to receive the signal from the antenna, cable, cable box, or  
if using the examples on pages 7-9, a VCR.  
LEFT  
RIGHT  
EXTERNAL SPEAKERS  
Chapter 1  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
The Front of Your TV/DVD  
Front Inputs  
The TV/DVD has front inputs for convenience: one set of audio/video inputs, an S-Video and a headphone jack. Locate the jacks either on the front of  
the TV/DVD or on one of the sides. You can access the component you connected to the front of the TV/DVD by pressing the INPUT button on your  
remote until FRNT appears on the screen. The jacks are ideal for using a video game console or a camcorder.  
Note: When connecting a device that uses a monaural cable, such as some camcorders, use the Left (mono) input jack to get sound from both speakers.  
PHONES Allows you to connect headphones to listen to the sound coming from the TV/DVD. To adjust volume control of the headphones, press the  
VOL > or VOL < button (the volume display appears). Press the arrow up or down button (the headphone volume display appears), then press the right  
or left arrow button to adjust the headphone volume.  
L/MONO and R AUDIO IN Receives audio from another component such as a VCR, camcorder or video game console.  
VIDEO IN Receives video from another component such as a VCR, camcorder or video game console.  
S-VIDEO IN Allows you to connect an S-Video cable from another component. Make sure you also connect audio cables from the component to the  
TV/DVD.  
Front Panel Buttons  
If you cannot locate your remote, you can use the front panel buttons of your TV/DVD to operate many of the TV/DVD’s features.  
OPEN/CLOSE Press to open and close disc tray.  
STOP Stops disc play.  
PLAY Begins disc play.  
MENU/OK Brings up the TV Main menu. When in the menu system, selects highlighted items.  
CH v Scans down through the current channel list. In the TV menu system, acts like down arrow button on the remote control and adjusts menu  
controls.  
v
CH  
Scans up through the channel list. In the TV menu system, acts like up arrow button on the remote control and adjusts menu controls.  
VOL < Decreases the volume. In the TV menu system, acts like left arrow button on the remote control and adjusts menu controls.  
VOL > Increases the volume. In the TV menu system, acts like right arrow button on the remote control and adjusts menu controls.  
POWER Turns the TV/DVD on and off.  
Put batteries in the remote  
•
•
•
Remove the battery compartment cover from the back of the remote by pushing down on and sliding off the cover.  
Insert 2 “AA” fresh batteries. Make sure the polarities (+ and -) are aligned correctly.  
Replace the cover.  
Turn on the TV/DVD  
Press TV on the remote, or press POWER on the TV/DVD’s front panel.  
Note: Pressing the TV button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.  
Complete the Initial Setup  
Tip  
The menu system in your TV allows the TV’s features to work properly. The first time you turn on your TV/DVD,  
To access the setup menus manually,  
the setup screens appear.  
press MENU and choose SETUP.  
12  
Chapter 1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections & Setup  
Set the Menu Language  
The first part of the setup allows you to select your preferred language for the menu system.  
1. Highlight your preferred language for the menu system using the arrow buttons.  
2. Press OK to select that language (the Channel Setup screen appears with Auto channel search  
highlighted).  
Complete Auto Channel Search  
This part of the setup allows the TV to search for all channels viewable through your antenna or  
cable TV system. This is sometimes called auto programming. Press OK to begin auto channel  
search. When the channel search is complete, press OK to access the List & Labels screen.  
Changing Lists and Labels  
The List & Labels part of the setup lets you edit your channel list and choose or create a personal  
six-character label for each channel.  
Note: Changing List and Labels can be time consuming. You can change these at a later time by accessing the  
Setup menu.  
1. Press the left or right arrow to scroll through the available channels and choose the channel  
you want to edit.  
2. Press the down arrow to highlight the In channel list option. Press the left or right arrow  
button to add (the box is checked) or remove (the box is unchecked) the channel from the list.  
3. Press the down arrow to highlight the Channel label option. Press the left or right arrow  
button to scroll through the available list of 25 most common labels. The last option in the list  
allows you to create your own six-character label for the channel (the first letter of the label  
is highlighted).  
4. Press the 1 or 2 number button to change the first letter of the label.  
5. Press the right arrow to highlight the second letter, then press the 1 or 2 number button to  
change the second letter, etc...  
6. When you are finished creating your label, select Go back (the Auto Convergence menu  
appears).  
Auto Convergence  
Your TV/DVD’s picture tubes might have been disturbed during delivery or after you moved the  
TV/DVD, causing the color in your TV/DVD to be out of alignment. The colors adjust by starting  
auto convergence.  
1. Press OK to begin auto convergence.  
2. When the auto convergence is complete, the Red center convergence menu appears. The cross  
in the middle of the screen should be yellow. If it is not, use the arrow buttons to move the  
red cross to overlap the green cross. Press OK when adjustments are complete.  
3. The Blue center convergence menu appears with a cyan cross in the middle of the screen. If it  
is not, use the arrow buttons to move the blue cross to overlap the green cross. Press OK (the  
TV tunes to the last available channel in the channel list).  
Chapter 1  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2: Using the Remote Control  
The Buttons on the Remote Control  
Indicator  
(0-9) Number Buttons Enter channel numbers and time settings directly through the remote control.  
To enter a one-digit channel, enter a zero first. To enter a two-digit channel, press the two digits. To enter  
a three-digit channel, press and hold the “1” button until “1” and two dashes (– –) appear, then add the  
second two digits. Example: to tune to channel 123, press and hold 1 until “1– –” appears, release the 1  
button and then press 2 and 3.  
ON OFF  
VCR1  
TV  
CABLE  
DVD VCR2 AUX SAT  
Arrows Used to point to different items in the TV or DVD menu and to adjust the menu controls. Moves  
the PIP window when no menus are on the screen. Also switches the two POP windows when no menus  
are on the screen. For Zoom use, go to next page.  
MUTE  
SKIP  
AUX Puts the remote in AUX mode. Can also be programmed to operate most brands of an additional  
remote-controllable component.  
Backlight Lights up some of the buttons in the dark.  
CH + or CH - In TV mode, scans up or down through the current channel list. Press once to change the  
channel up or down; press and hold to continue changing channels. In DVD mode while a disc is playing,  
CH+ advances to the next chapter; CH- goes to the preceding chapter.  
GUIDE  
GO BACK  
INFO  
CH+ or CH- PIP When using PIP or POP, changes the channel in the picture window.  
CLEAR Removes any menu or display from the screen and returns you to normal viewing.  
DISC MENU In DVD mode while a disc is playing, brings up the DVD Disc menu.  
DVD Turns on the DVD and puts the remote in DVD mode. Also displays current DVD status.  
FORWARD In DVD mode, advances the disc forward.  
DISC MENU  
ZOOM+  
OK  
ZOOM-  
FREEZE When watching TV, freezes the picture until you press another button to resume normal TV  
viewing.  
MENU  
CLEAR  
3
6
9
1
2
5
8
0
Note: Do not use the Freeze feature for an extended period of time. This can cause the image to be permanently imprinted  
on the picture tube. Such damage is not covered by your warranty. Press any button to unfreeze the picture at any time.  
4
GO BACK In TV mode, returns you to the previous channel. In DVD mode, returns to the previous screen.  
GUIDE In TV mode, brings up the Channel Guide menu. In DVD mode, brings up DVD guide, if available.  
INDICATOR Indicates the programming mode when programming the remote to control components.  
7
INPUT  
SOUND ANT  
INFO In TV mode, brings up TV status display; press again to clear the screen. In DVD mode, brings up  
the Info Display.  
REVERSE  
PLAY FORWARD  
INPUT Press to toggle through the available input sources (VID1, VID2, FRNT, CMP1, CMP2 and DVI. Press  
the CH+ or CH- button to resume TV viewing).  
RECORD  
PIP  
STOP  
PAUSE  
MENU In TV mode, brings up the TV Main menu. In DVD mode, brings up a reduced TV Menu.  
MUTE Reduces the TV’s volume to its minimum level. Press again to restore the volume.  
SWAP CH - CH +  
OK/FREEZE When in the menu system, selects highlighted items. When watching TV, freezes the picture  
until you press another button to resume normal TV viewing.  
PIP  
ON•OFF When in TV mode, turns the TV on and off. If in another device mode (VCR, DVD, SAT•CABLE,  
etc.) and programmed, will turn the device on and off.  
PAUSE In DVD mode, pauses the disc.  
PIP Press once to bring up the small picture-in-picture window. Press again to bring up the picture-  
outside-picture (POP) windows. Press to remove POP. (See Chapter 4 for more information about using  
PIP.)  
PLAY In DVD mode, plays the disc.  
Note: The VCR1, DVD, VCR2, and  
SAT•CABLE buttons also turn on most  
RCA, GE, and Proscan products.  
RECORD If your TV/DVD is connected to a VCR, records TV programs .  
REVERSE In DVD mode, goes backward on a disc.  
SAT•CABLE Puts the remote in SAT•CABLE mode and, if Autotuning is enabled, will turn on the TV and  
tune to the correct input channel.  
Tip  
To turn off all the RCA, GE, and Proscan  
components that are connected to the TV,  
press ON•OFF twice within two seconds.  
SKIP Press once before changing channels and the TV will wait 30 seconds before returning you to the  
original channel. Press repeatedly to add more time.  
SOUND•ANT In TV mode, displays the Picture and Sound preset settings at the bottom of the TV. In DVD  
mode while a disc is playing, displays the DVD Info Display with the Audio icon highlighted.  
This feature only works with most RCA,  
GE, and Proscan products.  
STOP In DVD mode, stops playing the disc. Press and hold for 3 seconds to open the disc tray.  
SWAP When using PIP, swaps the main picture with the PIP window. When using POP, swaps the left  
and right pictures.  
14  
Chapter 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
TV Turns on the TV and puts the remote in TV mode. Also displays current status.  
VCR1 Puts the remote in VCR1 mode and, if Autotuning is enabled, will turn on the TV and tune to the correct  
input channel.  
VCR2 Puts the remote in VCR2 mode and, if Autotuning is enabled, will turn on the TV and tune to the correct  
input channel.  
VOL – or VOL + Decreases or increases the TV’s volume.  
ZOOM+ or ZOOM- When watching TV, changes the current format of the screen (4x3, Zoom 14/9, Zoom 16/9,  
Zoom 16/9 ^/v, Cinerama, regular mode 16/9). In DVD mode while playing a 4:3 disc, use the Zoom buttons in the  
reduced TV menu to change the Zoom mode.  
Using the INPUT Button  
Use the INPUT button to scroll through the available input channels and view components you have connected  
to the TV.  
1. Press TV to place the remote in TV mode. Make sure the component you want to view is turned ON.  
2. Press INPUT to tune to an available input channel.  
3. To return to the channel you were previously watching on TV, press CH+ or CH- button.  
Programming the Remote to Operate Other Components  
VCR1  
ON • OFF  
TV  
The universal remote can be programmed to operate most brands of remote controllable components. The  
remote is already programmed to operate most RCA, GE, and Proscan components.  
DVD  
AUX SAT•CABLE  
VCR2  
Also, the AUX button can be programmed to operate most brands of an additional remote-controllable  
component.  
Note: The TV button can’t be programmed on this remote.  
Indicator  
Find Out If You Need to Program the Remote  
To determine whether the universal remote needs to be programmed for your component, turn the  
component ON. For example, to program the remote for a VCR, turn on the VCR. Point the remote at the  
VCR, and press the VCR1 button. Then press ON•OFF or CH + (channel up) or CH – (channel down) to see if  
the VCR responds to the remote commands. If the component does not respond, the remote needs to be  
programmed.  
Programming the Remote  
There are two ways to program the remote control:  
•
•
automatic code search  
direct entry  
Using Automatic Code Search  
The following instructions can be used to program the remote to operate each of your components. If you  
want to stop the automatic code search without programming any of your components, press CLEAR until  
the indicator on the remote turns off.  
REVERSE  
PLAY  
1. Turn on the component you want to operate (VCR, DVD player, etc.)  
STOP  
2. Press and hold the component button you want to program (VCR1, DVD, etc.). While holding the  
component button, press and hold ON•OFF until the indicator on the remote turns on, then release both  
buttons.  
3. Point the remote at the component. Press and release PLAY, then wait 5 seconds or until the indicator on  
the remote stops flashing.  
You’ll use these buttons when you  
program the remote.  
At this point the remote is searching for the correct code to program. If, after 5 seconds, the component  
you want to operate does not turn off, press PLAY again to tell the remote to search the next set of  
codes.  
Important: The remote may not be  
compatible with all models of all brands of  
components. It also may not operate all  
functions of the remote that came with your  
component.  
Continue pressing PLAY until the component turns off or you have searched through all of the codes.  
There are 20 total sets of codes. If the component does not turn off after pressing PLAY 20 times, then  
the remote can’t be programmed to operate that component.  
If the component you want to control does turn off:  
Tip  
1. Press and release REVERSE, then wait 2 seconds. Repeat this step until the device turns back ON.  
2. To finish, press and hold STOP until the indicator on the remote turns off.  
To stop the automatic code search without  
programming any components, press and  
hold CLEAR until the indicator on the remote  
turns off.  
Chapter 2  
15  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Using Direct Entry  
1. Turn on the component to be programmed.  
Important  
You must continue pressing the component  
button while you enter the code.  
2. Look up the brand and code number(s) for the component on the code list in this section.  
3. Point the remote at the component.  
Let’s say you have a Zenith VCR. To program  
the universal remote to operate the VCR, you  
would:  
4. Press and hold the component button you want to program on the remote.  
5. Enter the 4-digit code from the remote control code list on the following pages. If the indicator  
flashes, you have either entered an invalid code or the button isn’t programmable.  
Press and hold the VCR1 button while you  
enter the first code listed for Zenith in the VCR  
Codes column.  
6. Release the component button, and then press ON•OFF to see if the component responds to the  
command. If it doesn’t, try pressing the component button and then ON•OFF again.  
Release the VCR1 button. Press ON•OFF to see  
if the VCR responds. If it doesn’t, follow the  
same steps, but enter the second code for  
Zenith VCRs instead of the first.  
•
•
If you get no response, repeat these steps using the next code listed for your brand, until the  
component responds to the remote commands.  
If you try all the codes for your component brand and none work, try the automatic code search  
method. If automatic code search doesn’t find the code, the remote is not compatible with your  
component.  
Note  
How to Use the Remote After You’ve Programmed It  
Some of the remote’s buttons might operate  
differently for other components, especially  
when you’re using another component’s menu  
system.  
Because this universal remote can control several different components (TV, DVD, VCR, satellite receiver,  
etc.) it uses operational modes triggered by the component buttons. For example, if you want the  
remote to control the TV, you would press the TV button to put the remote into TV mode before you  
could control the TV.  
1. Press the appropriate component button (DVD, TV, VCR1, VCR2, SAT•CABLE, AUX) to set the remote  
to control the component.  
2. Press ON•OFF to turn the component ON or OFF.  
3. Use the remote buttons that apply to that component.  
Notes: The remote may not be compatible with all brands and models of components. It also may not operate all  
functions of the remote that came with your component.  
If you keep pressing buttons and nothing happens, the remote is probably in the wrong mode. You must press the  
component button that matches the component you want to operate (i.e., if you want to operate the VCR, press VCR1  
on the remote control to put the remote in VCR mode.)  
LXI................................................................................ 2014  
Magnavox ............................................. 2021, 2022, 2062,  
............................................ 2063, 2104, 2105, 2108, 2124  
Magnin......................................................................... 2013  
Marantz........ 2009, 2010, 2011, 2016, 2018, 2021, 2062,  
2064  
Marta............................................................................ 2014  
Masushita .................................................................... 2021  
Mei ............................................................................... 2021  
Memorex...... 2011, 2013, 2014, 2021, 2023, 2026, 2104,  
2132  
MGA ........................................................ 2029, 2065, 2113  
MGN Technology ........................................................ 2013  
Midland........................................................................ 2053  
Minolta ................................................... 2055, 2056, 2107  
Mitsubishi .. 2029, 2055, 2056, 2065, 2066, 2067, 2068,  
. 2068, 2070, 2071, 2072, 2073, 2074, 2106, 2113, 2123  
Montgomery Ward ........................................... 2075, 2132  
Motorola ............................................................ 2021, 2132  
MTC .................................................................... 2013, 2126  
Multitech ...........................2013, 2016, 2026, 2053, 2061  
NEC...................................... 2009, 2010, 2011,2016, 2018,  
.................................. 2064, 2076, 2078, 2079, 2111, 2123  
Nikko ............................................................................ 2014  
Noblex.......................................................................... 2013  
Olympus ....................................................................... 2021  
Optimus.............................................................. 2014, 2132  
Optonica ...................................................................... 2096  
Panasonic ............... 2021, 2022, 2109, 2125, 2126, 2127  
Pentax ................................ 2016, 2055, 2056, 2107, 2120  
Pentex Research.......................................................... 2018  
Philco ........................................... 2021, 2022, 2062, 2063  
Philips .......................................... 2021, 2062, 2096, 2124  
Pilot .............................................................................. 2014  
Pioneer ............................... 2010, 2055, 2080, 2081, 2123  
Portland ........................................ 2016, 2017, 2019, 2110  
Proscan ................................................... 2000, 2001, 2131  
DBX ............................................................................2009, 2010  
Dimensia ....................................................................2000, 2131  
Dynatech.............................................................................. 2026  
Electrohome ............................................................. 2014, 2029  
Electrophonic ...................................................................... 2014  
Emerson ......................... 2012, 2014, 2015, 2021, 2024, 2025,  
..........2026, 2029, 2030, 2031, 2032, 2033, 2034,2035,  
2036, ..........2037, 2038, 2039, 2040, 2041, 2042,2044,  
2045, 2046, ............................................2047, 2065, 2113,  
2116, 2117, 2130  
Remote Control Codes  
VCR Codes  
Programmable for VCR1, VCR2, and AUX  
buttons.  
Admiral .............................................................................. 2132  
Adventura .......................................................................... 2026  
Aiko .................................................................................... 2027  
Aiwa ................................................................................... 2026  
Akai ........... 2003, 2004, 2005, 2007, 2008, 2111, 2112, 2113  
American High.................................................................. 2021  
Asha ................................................................................... 2013  
Audio Dynamics .................................................... 2009, 2010  
Audiovox ........................................................................... 2014  
Bell & Howell .....................................................................2011  
Beaumark........................................................................... 2013  
Broksonic ................................................................ 2012, 2025  
Calix ................................................................................... 2014  
Candle ............................................... 2013, 2014, 2015, 2016,  
....................................................................... 2017, 2018, 2019  
Canon ............................................................ 2021, 2022, 2114  
Capehart................................................................... 2020, 2110  
Carver................................................................................. 2062  
CCE .......................................................................... 2027, 2061  
Citizen .................................................................... 2013, 2014,  
....................................... 2015, 2016, 2017, 2018, 2019, 2027  
Colortyme .......................................................................... 2009  
Colt ..................................................................................... 2061  
Craig ................................................... 2013, 2014, 2023, 2061  
Curtis-Mathes............................................. 2000, 2009, 2013,  
............................. 2016, 2018, 2021, 2022, 2024, 2115, 2131  
Cybernex ........................................................................... 2013  
Daewoo ....2015, 2017, 2019, 2025, 2026, 2027, 2028, 2110  
Daytron ............................................................................... 2110  
Fisher .........2011, 2023, 2048, 2049, 2050, 2051, 2052, 2118  
Fuji ............................................................................. 2021, 2119  
Funai .................................................................................... 2026  
Garrard................................................................................. 2026  
GE ................................................................... 2000, 2001, 2013,  
......................................... 2021, 2022, 2053, 2115, 2120, 2131  
Goldstar ............................................... 2009, 2014, 2018, 2054  
Gradiente ............................................................................. 2026  
Harley Davidson ................................................................. 2026  
Harman Kardon .................................................................. 2009  
Harwood .............................................................................. 2061  
Headquarter.......................................................................... 2011  
Hitachi ..................................................................... 2055, 2056,  
..................................................... 2057, 2107, 2111, 2120, 2122  
Hi-Q ...................................................................................... 2023  
Instant Replay ..................................................................... 2021  
JCL ........................................................................................ 2021  
JC Penney ............................................ 2009, 2010, 2011, 2013,  
.................................................. 2014, 2021, 2022, 2055, 2056,  
.................................................... 2058, 2059, 2060, 2107, 2118  
Jensen ............................................................. 2055, 2056, 2111  
JVC ................................... 2009, 2010, 2011, 2018, 2111, 2123  
Kenwood ................ 2009, 2010, 2011, 2016, 2018, 2111, 2123  
KLH....................................................................................... 2061  
Kodak .........................................................................2014, 2021  
Lloyd .................................................................................... 2026  
Logik .................................................................................... 2061  
16  
Chapter 2  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Remote Control  
Audio Codes  
VCR Codes continued  
Cable Box Codes  
Protec .......................................................................... 2061  
Pulsar .......................................................................... 2104  
Quarter ........................................................................ 2011  
Quartz ......................................................................... 2011  
Quasar ................................................... 2021, 2022, 2125  
RCA ........... 2000, 2001, 2003, 2013, 2021, 2055, 2056,  
....... 2082, 2083, 2084, 2085, 2086, 2087, 2088, 2089,  
............ 2090, 2091, 2107, 2115, 2120, 2125, 2131, 2133  
Radioshack/Realistic ................. 2011, 2013, 2014, 2021,  
......... 2022, 2023, 2026, 2029, 2049, 2050, 2096, 2132  
Radix ........................................................................... 2014  
Randex ........................................................................ 2014  
Ricoh ........................................................................... 2128  
Runco .......................................................................... 2104  
Samsung ................ 2005, 2013, 2015, 2033, 2053, 2112  
Sanky ................................................................2104, 2132  
Sansui .......................................... 2010, 2092, 2111, 2123  
Sanyo ..................................................... 2011, 2013, 2023  
Scott . 2012, 2015, 2025, 2032, 2038, 2065, 2093, 2116  
Sears .................................2011, 2014, 2021, 2023, 2048,  
.................... 2049, 2050, 2051, 2055, 2056, 2107, 2118  
Sharp .......... 2017, 2029, 2094, 2095, 2096, 2097, 2132  
Shintom ..................................... 2004, 2056, 2061, 2098  
Shogun........................................................................ 2013  
Signature .................................................................... 2132  
Singer ..................................................... 2021, 2061, 2128  
Sony ............................................ 2004, 2098, 2099, 2119  
STS .................................................................... 2021, 2107  
Sylvania ..... 2021, 2022, 2026, 2062, 2063, 2065, 2124  
Symphonic ................................................................. 2026  
Tandy .......................................................................... 2011  
Tashiko ........................................................................ 2014  
Tatung .......................................................................... 2111  
TEAC ...................................................... 2026, 2085, 2111  
Technics ............................................................2021, 2109  
Teknika .............................2014, 2021, 2026, 2100, 2129  
TMK ....................................................... 2013, 2024, 2047  
Toshiba........ 2015, 2049, 2051, 2055, 2065, 2093, 2116  
Totevsion ......................................................... 2013, 2014  
Unitech........................................................................ 2013  
Vector Research ......................... 2009, 2010, 2015, 2016  
Victor .......................................................................... 2010  
Video Concepts ................ 2009, 2010, 2015, 2016, 2113  
Videosonic .................................................................. 2013  
Wards ......................................... 2013, 2014, 2015, 2021,  
............................. 2023, 2026, 2029, 2055, 2056, 2061,  
...................... 2096, 2101, 2102, 2103, 2107, 2116, 2132  
XR-1000 ............................................... 2021, 2026, 2061  
Yamaha .............................. 2009, 2010, 2011, 2018, 2111  
Zenith ................................ 2004, 2098, 2104, 2119, 2128  
Programmable for the AUX button only.  
Programmable for SAT•CABLE and AUX buttons.  
ABC ...........................................5002, 5003, 5004, 5006, 5053  
Antronix ................................................................... 5008, 5009  
Archer ............................................................. 5008, 5009, 5010  
Cabletenna ........................................................................... 5008  
Cableview ............................................................................ 5008  
Colour Voice ..............................................................5012, 5013  
Comtronics .......................................................................... 5014  
Contec .................................................................................. 5016  
Eastern ................................................................................. 5017  
GC Electronics..................................................................... 5009  
GE .............................................................................. 5000, 5001  
Gemini .......................................................................5018, 5019  
General Instrument ............................................................ 5003  
Hamlin ........................... 5020, 5021, 5022, 5028, 5035, 5045  
Hitachi ................................................................................. 5003  
Jerrold ............................ 5003, 5018, 5023, 5024, 5046, 5053  
Magnavox ........................................................................... 5025  
Memorex.............................................................................. 5026  
Movie Time ......................................................................... 5027  
NEC....................................................................................... 5005  
NSC....................................................................................... 5027  
Oak ............................................................................ 5016, 5029  
Panasonic ................................................................ 5048, 5052  
Philips ........................................ 5011, 5012, 5013,5015, 5019,  
.....................................................5025, 5030, 5031, 5032  
Pioneer ...................................................................... 5033, 5034  
Proscan ..................................................................... 5000, 5001  
RCA ......................................................5007, 5047, 5049, 5052  
Realistic ............................................................................... 5009  
Regal ......................................................................... 5022, 5035  
Regency ............................................................................... 5017  
Rembrandt ........................................................................... 5003  
Samsung .............................................................................. 5034  
Scientific Atlanta............................... 5006, 5036, 5037, 5038  
Signal ................................................................................... 5018  
Signature ............................................................................. 5003  
Sprucer ................................................................................. 5052  
Standard Components............................................. 5039, 5044  
Starcom..................................................................... 5018, 5053  
Stargate................................................................................ 5018  
Starquest .............................................................................. 5018  
Tocom ....................................................................... 5004, 5023  
Tusa ...................................................................................... 5018  
TV86 ..................................................................................... 5027  
Unika ......................................................................... 5008, 5009  
United Cable ........................................................................ 5053  
Universal......................................................... 5008, 5009, 5010  
Viewstar .................................................................... 5025, 5027  
Zenith ........................................................................ 5050, 5051  
RCA and Dimensia  
AM/FM .......................................................... 4003, 4270  
AUX .......................................................................... 4004  
Phono ....................................................................... 4005  
Tape........................................................................... 4006  
CD......................................................... 4007, 4190, 4211  
Receivers  
Aiwa ............................................ 4261, 4262, 4263, 4264,  
....................................................... 4265, 4266, 4267, 4277  
Denon............................................................................. 4283  
Harman Kardon ............................................................ 4276  
JVC ................................................................................. 4268  
JVL ................................................................................. 4276  
Kenwood ........................................................................ 4269  
Onkyo............................................................................. 4278  
Optimus.......................................................................... 4284  
Panasonic ........................................................... 4279, 4280  
Pioneer ........................................................................... 4275  
RCA ................................................................................ 4270  
Sherwood....................................................................... 4282  
Sony .......................................................... 4271, 4272, 4281  
Technics .............................................................. 4279, 4280  
Wards ............................................................................. 4275  
Yamaha ............................................................... 4274, 4275  
CD Players  
ADC .......................................................... 4200, 4201, 4220  
Aiwa .................................................................... 4175, 4203  
Akai ................................................................................ 4205  
Denon............................................................................. 4208  
Dynatech........................................................................ 4177  
Emerson ......................................................................... 4178  
Fisher ........................................................ 4179, 4212, 4213  
GE ................................................................................... 4216  
Hitachi ........................................................................... 4180  
JVC .......................................................................4181, 4221  
Kenwood .................................................. 4183, 4222, 4224  
Luxman.......................................................................... 4225  
Marantz............................................................... 4185, 4226  
Mitsubishi ........................................................... 4229, 4230  
MCS ................................................................................ 4228  
Nakamichi .......................................................... 4232, 4233  
NEC................................................................................. 4184  
Onkyo....................................................... 4186, 4234, 4235  
Optimus.................................................... 4237, 4238, 4239  
Panasonic ...................................................................... 4188  
Pioneer ................................................................ 4189, 4240  
RCA ...................................................................... 4190, 4211  
Sanyo ............................................................................. 4250  
Sears ............................................................................... 4207  
Sherwood....................................................................... 4243  
Sony ......................................................... 4195, 4209, 4244  
Teac .......................................................... 4245, 4246, 4247  
Technics ......................................................................... 4197  
Toshiba........................................................................... 4231  
Yamaha .................................................... 4198, 4199, 4248  
Satellite Receiver Codes  
DVD codes  
Programmable for SAT•CABLE and AUX  
buttons.  
Programmable for the AUX button.  
Alphastar .................................................................... 5079  
Chapparal ........................................................ 5056, 5057  
Dishnet ........................................................................ 5078  
Drake ................................................................ 5058, 5059  
Echostar ...................................................................... 5089  
GE ..................................................................... 5000, 5001  
General Instruments ............................ 5060, 5061, 5062  
Hitachi ............................................................. 5083, 5084  
Hughes ............................................................. 5077, 5090  
JVC .............................................................................. 5082  
Panasonic ................................................................... 5075  
Philips ......................................................................... 5085  
Primestar .................................................................... 5076  
Proscan ............................................................ 5000, 5001  
RCA .................................. 5000, 5001, 5071, 5080, 5081  
Realistic ...................................................................... 5063  
Sony ............................................................................ 5072  
STS1 ............................................................................ 5064  
STS2 ............................................................................ 5065  
STS3 ............................................................................ 5066  
STS4 ............................................................................ 5067  
Toshiba............................................................. 5068, 5073  
Uniden ............................................................. 5069, 5086  
Aiwa ..................................................................................... 3009  
GE ......................................................................................... 3000  
Hitachi ................................................................................. 3008  
JVC .............................................................................3002, 3010  
Konka ......................................................................... 3011, 3012  
Magnavox ........................................................................... 3003  
Mitsubishi ............................................................................ 3004  
Panasonic ............................................................................ 3013  
Philips .................................................. 3003, 3019, 3021, 3022  
Pioneer ................................................................................. 3005  
Proscan ................................................................................ 3000  
RCA ........................................................................... 3000, 3001  
Sanyo ................................................................................... 3014  
Sony ................................................................ 3006, 3015, 3016  
Toshiba............................................................ 3007, 3017, 3020  
Zenith ................................................................................... 3018  
Chapter 2  
17  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3: Playing DVDs  
Regional Coding  
Both the TV/DVD unit and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the  
disc won’t play. This unit’s code is region 1.  
Using Different Menus  
Each disc is programmed with different features. There are three separate menu paths that you can use to access features:  
•
The Disc menu – The disc menu is part of each disc and is separate from the DVD’s menu system. The contents of each disc menu vary according  
to how the disc was authored and what features are included. The disc menu is turned on and off (while the disc is playing) with the DISC MENU  
button on the remote.  
•
•
The DVD’s Info Display – The Info Display appears as icons across the top of the screen when a disc is playing. It can only be accessed while you  
are playing a disc. It’s turned on and off with the INFO button on the remote.  
The DVD’s menu system – The DVD’s menu system is accessed only when a disc isn’t playing. It appears when the STOP button is pressed.  
A feature only works if the disc was programmed with that feature. If a menu item is “grayed out” it means that item isn’t available.  
Loading and Playing Discs  
Your TV/DVD unit plays DVD discs, Video CD discs, Audio CD discs, MP3 discs and CD-R discs. Before you load a disc, make sure that it is compatible  
with the player. The following discs CANNOT be used with this player:  
•
Laserdiscs, CD-I, CD-ROM (computer-only discs), CD-RW, DVD-ROM, Discs recorded using other broadcast standards (i.e. PAL or SECAM)  
a
t
c
a
t
c
h
To Load and Play a Disc  
h
n
U
U
p
p
C
C
To put the TV/DVD in DVD mode and play a disc, press the DVD button on the remote control.  
1. Press the OPEN•CLOSE button on the front of the TV/DVD. The disc tray opens.  
2. Place a disc gently into the tray with the disc’s label facing up (double-sided discs have content on both  
This is an example of  
a one-sided disc.  
sides, so you can place either side up).  
3. Press the OPEN•CLOSE or PLAY button. The disc tray closes.  
The TV/DVD reads the disc’s table of contents, and then one of three things happens depending on how  
the disc was programmed:  
e
U
h
C
n
•
•
The disc starts playing.  
The disc menu appears on the screen. One of the options will start disc play. Highlight that option  
and press OK on the remote.  
This is an example of  
a 2-sided disc. The  
title is in the center.  
•
The DVD’s main menu appears on the screen. Highlight the Play option and press OK on the remote.  
When you stop playing a disc, the unit remembers where you stopped. When you start playing the disc again,  
the unit picks up where you left off unless the disc is removed, the unit is unplugged, or you pressed the STOP  
button twice.  
Using a Disc Menu  
A disc is capable of having an on-screen menu that is separate from the DVD’s menu system and on-screen Info Display. The disc menu might only  
contain a list of the titles and chapters, or it may allow you to change features such as language and playback settings.  
The content and operation of disc menus vary from disc to disc.  
Using the On-Screen Info Display  
The on-screen Info Display contains many playback features. To see the Info Display, press the INFO button on the remote while a disc is playing. The  
Info Display appears across the top of the screen. Each feature is illustrated with an icon. Use the left/right arrow buttons on the remote to move  
through the different icons in the Info Display.  
When an icon is highlighted, use the up/down arrow buttons on the remote to scroll through the choices displayed in the text box under the icons.  
Remember, you can only access the Info Display when you’re playing a disc. Also, the Info Display features are only available if the disc was created  
with that particular feature (i.e., if you select the Subtitle icon, you won’t be able to change the subtitle language unless the author of the disc  
created the disc with subtitles).  
The invalid symbol  
appears on the screen when you press a button that doesn’t have any function. If one of the icons is “grayed out,” that Info  
Display feature isn’t available for the disc you’re playing. To make the Info Display disappear from the screen, press INFO on the remote.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights  
owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,  
and is intended for home use only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
18  
Chapter 3  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing DVDs  
Repeat  
Subtitles  
Camera angle  
Chapter  
Audio  
Bookmarks  
Time Display  
Title  
Transport mode  
Text about your Info Display  
selection appears here  
Time Display  
This feature displays the audio/video time. For DVD discs, the time displayed refers to the current title time. For Audio CDs, it refers to the current  
track time.  
For DVD video discs, the Time Display also acts as a Time Search feature. This lets you go to a particular scene in a movie by entering the time that  
scene is played. To use Time Search:  
Press INFO on the remote to bring up the Info Display. Highlight the Time Display and enter the elapsed time of the scene you wish to go to. For  
example, enter 01:12:00 to go to the scene that plays at 1 hour and twelve minutes into the movie.  
When you’ve entered the time, press OK on the remote.  
Selecting a Title  
Some discs contain more than one title. Each title is divided into chapters. To select a title:  
1. While the disc is playing, press INFO on the remote to bring up the Info Display.  
2. If the Title icon on the Info Display isn’t highlighted, use the left/right arrow buttons to highlight it.  
3. Use the number button(s) on the remote to enter the title number or press the up/down arrow buttons to go to the next/previous title.  
4. Press OK on the remote when the title you want to play appears in the text window.  
Note: Some discs only have one title.  
Selecting a Chapter  
Because DVD discs use digital technology, a title can be divided into individual chapters (similar to tracks on a CD). You can skip to a specific chapter  
by using the Chapter feature in the Info Display.  
1. While a disc is playing, press INFO on the remote to bring up the Info Display.  
2. Press the left/right arrow buttons to highlight the Chapter icon.  
3. Use the number buttons on the remote to enter the number of the chapter you want to play or press the up/down arrow buttons to go to the  
next/previous title.  
4. Press OK on the remote.  
Notes: The Chapter feature won’t work if the disc isn’t formatted with separate chapters.  
Press CH + or CH – on the remote to highlight the Chapter icon. Then press CH + to advance to the next chapter or CH – to go to the preceding chapter.  
Selecting Subtitles  
By default, subtitles are off. To turn subtitles on and change the Subtitle language while you’re watching a DVD disc:  
1. While the disc is playing, press INFO on the remote.  
2. Press the left/right arrow buttons to highlight the Subtitle icon.  
3. If subtitles are off, press OK to turn them on.  
4. Use the up/down arrow buttons to scroll through the subtitle languages that are available on the disc. If subtitles aren’t  
available, the text in the text box will read Subtitles: Not Available. If subtitles are available, the language currently  
showing in the text box is the active selection. The subtitles will be shown in that language.  
5. To make the Info Display disappear, press the INFO button on the remote.  
Notes: Changing the subtitle language with the Info Display will only affect the disc currently being played. When the disc is removed or the unit  
is turned off, the subtitle language will revert to the language setting specified through the DVD’s main menu.  
The subtitle language can also be changed through the DVD’s main menu.  
Chapter 3  
19  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing DVDs  
Changing the Audio Language  
If the disc was created with different language tracks (recorded in different languages), you can use the Info Display to  
temporarily change the DVD’s Audio Language setting.  
1. While a disc is playing, press SOUND•ANT on the remote. The current audio language appears in the text box below the  
row of icons.  
2. Press the up/down arrow buttons to scroll through the audio languages that are available on the disc until the audio  
language you want to use appears in the text box. Audio will be played in that language.  
3. To make the Info Display disappear, press the INFO button on the remote.  
Notes: The language feature only works if the disc was created with multiple audio tracks.  
When you choose an audio language from the Info Display, you only override the audio language setting in the DVD’s main menu temporarily.  
The audio language can also be changed through the DVD’s main menu.  
Using the Repeat Feature  
The default mode for the Repeat feature is Off. There are four Repeat options:  
•
•
•
•
Disc – repeats the disc that is playing  
Title – repeats the title that is playing  
Chapter – repeats the chapter that is playing  
A•B – Set the beginning (point A) and the end (point B) to make this part of the movie play repeatedly.  
To Use Repeat:  
1. While a disc is playing, press INFO on the remote to bring up the Info Display.  
2. Highlight the Repeat icon. The text in the text box below the icons will read Repeat Mode: Off.  
3. Press the up/down arrow buttons to scroll through the Repeat options until the Repeat option you want is displayed in  
the text box.  
4. Press OK. The selected repeat option will loop repeatedly until you turn Repeat off. Repeat is turned off by completing  
steps 1 through 3 above, and selecting the Off option.  
A•B Repeat  
A•B Repeat lets you define a specific segment on the disc that you want to repeat. For example, you might like to watch the  
dogfight in the movie Top Gun. To watch this scene over and over:  
1. Find the spot on the disc that is a few seconds before the beginning of the scene you want to repeat (this gives you time  
to access the Info Display and the Repeat feature).  
2. Press INFO on the remote and select the Repeat icon from the Info Display.  
3. Press the up/down arrow buttons until the A•B Repeat option is shown in the text box underneath the icons. The text box  
reads Repeat Mode: A-B Press OK to Set A Point.  
4. At the beginning of the scene you want to repeat, press OK to set the A point.  
5. When you get to the part of the disc that you want to be the end of the repeated segment (the B point), press OK. The  
segment will repeat until you turn Repeat off.  
6. To make the Info Display disappear from the screen, press the INFO button on the remote.  
How to Cancel Repeat  
There are three ways to cancel Repeat:  
•
•
•
Press STOP twice.  
Go to the Repeat icon in the Info Display and select Off.  
Eject the disc.  
20  
Chapter 3  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing DVDs  
Using Bookmarks  
The bookmark feature lets you mark a point on the disc that you can go to quickly. You can store up to 6 bookmarks per disc.  
When you turn the TV/DVD off or remove the disc, bookmarks are cleared.  
Storing a Bookmark  
1. While a disc is playing, press INFO on the remote.  
2. Highlight the Bookmark icon and press OK.  
3. The Bookmark Menu appears. An available unmarked icon will be highlighted (a disc with two arrows).  
4. When you reach the scene you want to mark, press OK. The unmarked icon changes to two icons (side-by-  
side):  
•
•
An arrow that is used to activate the bookmark.  
A trash can that is used to clear the bookmark.  
Next to the icons, the bookmark start time and chapter are displayed.  
5. Press the INFO button on the remote to make the Info Display disappear from the screen.  
Using a Bookmark  
1. While you’re playing a disc, press INFO on the remote.  
2. Highlight the Bookmark icon and press OK.  
3. Highlight the arrow next to the bookmarked scene you want to activate.  
4. Press OK to return to the place you bookmarked.  
5. To make the Info Display disappear from the screen, press INFO on the remote.  
Clearing a Bookmark  
The bookmarks are cleared each time a disc is removed from the disc tray or when the power is turned off. If you  
want to clear a bookmark while the disc is playing:  
1. Press INFO on the remote.  
2. Highlight the Bookmark icon and press OK.  
3. Highlight the trash can icon next to the bookmark you want to clear. Press OK.  
4. The bookmark is cleared and the trash can icon changes back to the unmarked disc icon.  
If all 6 bookmarks are in use, you can only mark a new scene by clearing an existing bookmark.  
Changing the Camera Angle  
Some discs contain multiple angles of a particular scene or sequence. If the disc only has one angle, this feature won’t work.  
When multiple angles are available, the Camera Angle icon appears in the upper right corner of the screen. To change the  
camera angle:  
1. While a disc is playing, press INFO on the remote.  
2. The Camera Angle icon will display the number of angles available. For example, if there are 3 different angles, the icon  
will read 1 of 3. This means angle 1 is currently being played.  
3. The text box beneath the icons displays Camera Angle: 1. Use the up/down arrow buttons to scroll through the camera  
angle choices. The camera angle number displayed in the text window is automatically shown.  
4. To make the Info Display disappear, press the INFO button on the remote.  
Chapter 3  
21  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 4: Using the TV’s Features  
Channel Banner  
There are several indicators that might appear when you press the TV or INFO buttons on the  
remote. This display is called the Channel Banner. The following list describes the items on the  
Channel Banner screen (left to right and top to bottom).  
4/3 format  
Displays the current screen format.  
Mono  
(or Stereo)  
Mono displayed when the current channel is broadcasting in mono.  
Stereo displayed when the current channel is broadcasting in stereo.  
SAP  
Displayed when the current channel is broadcasting SAP (Second Audio  
Program) information.  
Sample displays on a Channel Banner.  
Displayed when the Parental Controls are locked.  
CC  
03:45 pm  
15 NBC  
Commercial  
skip 0:30  
Displayed when Closed Captioning is available on the current channel.  
Displays the current time.  
Displays the current channel and label assigned to the channel.  
Displayed to count time remaining on the commercial skip (SKIP) timer.  
Displayed when you mute the sound.  
Why You Should Use the Autotuning Feature  
The autotuning feature automatically tunes the TV to the correct channel for different components you have connected to your TV/DVD (like a VCR)  
When you set up autotuning in the menu system you don’t have to remember to change your TV to channel 3, for example, when you want to watch  
the tape in your VCR.  
How to Set Up the Autotuning Feature  
The way you set up the autotuning feature in the TV’s menu corresponds to the component buttons on the remote and the way you have each  
component connected to your TV/DVD. When you set up autotuning, you’re telling the TV what channel to tune to when you press the VCR1, VCR2, or  
SAT•CABLE button on the remote control.  
1. Press MENU (the MAIN MENU appears).  
2. Highlight Setup and press OK on your remote control.  
3. Highlight Autotuning and press OK.  
4. Choose which channel you would like to set:  
Set VCR 1 Channel Lets you set up the channel the TV tunes to when you press the VCR1 button.  
Set VCR 2 Channel Lets you set up the channel the TV tunes to when you press the VCR2 button.  
Set SAT/Cable Channel Lets you set up the channel the TV tunes to when you press the SAT•CABLE button on an RCA satellite receiver remote.  
(The RCA DTC100 HD receiver is considered a satellite device and can be set up for autotuning using this channel.)  
5. Press the right arrow button to select the choice that matches the way you have the component connected to this TV, and press OK.  
The choices and a brief explanation follow:  
N/A Choose this if you don’t have this particular component connected to the TV/DVD, or if you  
don’t want the TV to automatically tune to the correct channel when you’re using this component.  
Channel 3 or 4 Component is connected to the CABLE/ANTENNA jack on the back of the TV/DVD, and  
you want the TV to tune to channel 3 when you press the corresponding button on the remote.  
Reminder: make sure the component’s Channel 3/4 switch is set to channel 3.  
VID1 or VID2 (Video Input) Component is connected to a VIDEO or S-Video jack on the back of the  
TV/DVD and you want the TV to tune to a VID input channel when you press the corresponding  
button.  
FRNT (Front Video Input) Component is connected to the VIDEO jack on the front of the TV/DVD and  
you want the TV to tune to the front VID input channel (FRNT) when you press the corresponding  
button.  
CMP1 or CMP2 (Component Video Input) Compatible component video source, such as a digital TV  
converter box, is connected to the three COMPONENT VIDEO INPUT jacks (Y,PB,PR) on the back of the  
TV/DVD and you want the TV to tune to the component video input channel (CMP) when you press  
the corresponding button.  
DVI Component is connected to the DVI-HDCP jack on the back of the TV/DVD and you want the TV  
to tune to the DVI input channel when you press the corresponding button.  
22  
Chapter 4  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Features  
Parental Controls and V-Chip  
The first three choices in the Parental Controls menu involve software inside your TV (referred to as V-Chip) which allows you to block TV programs  
and movies based on violence, sex, or other content you may believe children should not view.  
Once you block programs, you can unblock programs by entering a password.  
By default, the software inside your TV is turned “off.”  
Note: Parental Control settings are not available for DVI, CMP1 or CMP2 inputs.  
How V-Chip Works  
V-Chip reads the program’s age-based rating (TV-MA, TV-14, etc.) and content themes [(Violence (V), Adult Language (L), etc.)]. If you have blocked the  
rating and/or content themes that the program contains, you will receive the message This channel is not approved for viewing.  
Broadcasters are not required to provide content themes, so programs received with no content themes will only be blocked if you block their age-  
based rating. You can also block out programs that have been given a rating of “Not Rated,” and programs that are considered “unrated.” The TV age-  
based ratings and content themes you can block are listed in the following table.  
Description and Content Themes for Age-Based Ratings  
Age-Based Rating  
TV-MA  
Mature Audience Only. Specifically designed to be viewed by adults and may be unsuitable for children under 17. It contains  
one or more of the following content themes: crude indecent language (L), explicit sexual activity (S), or graphic violence (V).  
Parents Strongly Cautioned. Contains some material that many parents would find unsuitable for children under 14. Parents  
are strongly urged to exercise greater care in monitoring this program and are cautioned against letting children under the  
age of 14 watch unattended. This program contains one or more of the following content themes: intensely suggestive  
dialogue (D), strong coarse language (L), intense sexual situations (S), or intense violence (V).  
TV-14  
Parental Guidance Suggested. Contains material that parents may find unsuitable for younger children. Many parents may  
want to watch it with their younger children. The program contains one or more of the following content themes: some  
suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or moderate violence (V).  
TV-PG  
TV-G  
General Audience. Most parents would find this program suitable for all ages. It contains little or no sexual dialogue (D) or  
situations (S), no strong language (L), and little or no violence (V).  
Directed to Children 7 years and older. Designed for children ages 7 and above. It may be more appropriate for children who  
have acquired the developmental skills needed to distinguish between make-believe and reality. Themes and elements in this  
program may include mild fantasy violence (FV) or comedic violence, or may frighten children under the age of 7.  
TV-Y7  
TV-Y  
All Children. Themes and elements in this program are designed for a young audience, including children from ages 2-6. It is  
not expected to frighten younger children.  
V-Chip TV Rating  
The V-Chip TV Rating lets you decide which TV programs can and cannot be viewed.  
To set TV programming limits:  
1. Choose Parental Control from the Main menu. If Parental Controls have previously been locked,  
you must enter your password.  
2. Press OK to continue.  
3. Highlight and select V-Chip TV rating.  
4. Once you get to the V-Chip TV rating limit screen, use the arrow buttons and OK on your remote  
to change the status of a TV program rating or content theme from View to Block.  
5. For TV rating limits to take effect, lock Parental Controls by accessing the Lock parental controls  
menu.  
The following sections give you more details about how to change the status of TV program limits.  
Chapter 4  
23  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Features  
The V-Chip Rating Screen  
The following is an example of where items are located within the Rating Limit screen.  
Rating Status Field  
Lets you select whether the status of the age-based rating limit to the  
left is View or Block.  
Content Themes  
Lists the content themes you  
can block or view.  
Rating Field  
Content Status Fields  
Lets you select from a list  
of age-based ratings you  
can block or view.  
Lets you select which content  
themes to view for the selected  
rating, and whether the status of  
the content theme is currently  
View ( ) or Block ( ).  
Rating Settings Area  
Lets you see the current block/view state of age-based ratings and associated  
content. The View ( ) settings are coded in green, and the Block ( ) settings  
are coded in red.  
Blocking Age-Based Ratings  
You can automatically block all program ratings above a specified age-based rating level.  
To block programs with higher ratings:  
1. Press the up or down arrow button to scroll to the rating corresponding with the lowest rating  
you do not want the child to watch.  
2. Press the OK button to toggle between View and Block. The status for the rating listed to the left  
and all higher ratings automatically changes to Block (and ).  
3. Press the up or down arrow button to highlight Go back and press OK.  
4. Select Lock Parental Controls from the Parental Control menu for rating limits to take effect.  
Hierarchy of Age-Based Ratings  
Viewing Age-Based Ratings  
After you block age-based ratings, you can change some of the ratings back to View.  
1. Press the up or down arrow button to select the rating with a status of Block.  
2. Press OK to select View.  
TV-MA  
Mature Audience Only  
Parents Strongly Cautioned  
Parental Guidance Suggested  
General Audience  
TV-14  
TV-PG  
TV-G  
TV-Y7  
TV-Y  
Directed to Children 7 years and older  
All Children  
Blocking Specific Content Themes  
You can block programs based on their content. (Content is represented by the D, L, S, V and FV on  
your screen.) When you block a content theme for a particular rating, you automatically block that  
content theme for higher rated programs as well.  
Content Themes  
Sexually explicit dialogue  
Adult language  
D
L
To block program content:  
1. Determine the content themes you want to block.  
S
Sexual situations  
Violence  
2. Press the down arrow button to scroll to the rating whose content theme you want to change.  
3. Press the right arrow button to move the yellow highlight to a particular content theme status.  
V
FV  
Fantasy Violence  
4. Press the OK button to change its status to . (In the example to the left, you block the  
language (L) corresponding with TV-14. The language for TV-MA is blocked as well.)  
Notes: Broadcasters are not required to provide content themes or age-based ratings.  
You must remember to lock Parental Controls for rating limits to take effect.  
24  
Chapter 4  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Features  
Viewing Specific Content Themes  
If you block specific content themes, you have the option of going back and changing some of the  
content themes back to ( ) View:  
1. Determine the content themes you want to change to ( ) View.  
2. Press the down arrow button to scroll to the rating whose content theme you want to change,  
such as under language (L) corresponding with TV-14.  
3. Press the right arrow button to move the yellow highlight to a particular content theme status.  
4. Press the OK button to change the status back to . Your child would then be able to watch  
programs with the TV-14 adult language content, but not programs with TV-MA language content.  
Note: Only the content theme status corresponding to TV-14 (L) language changes to (V) View. Higher rated content  
themes, such as that for TV-MA language, do not change.  
Tip  
To change all V-Chip movie or TV ratings to  
View, press the 0 number button.  
V-Chip Movie Rating Limit  
Set movie rating limits by blocking movies rated above a specified level.  
To change menu:  
1. Press MENU on the remote control (the TV MAIN MENU appears).  
2. Select Parental Control.  
3. Select V-Chip movie rating.  
Blocking Movie Ratings  
Once you are in the Movie Ratings menu, follow the same steps described for blocking TV ratings.  
V-Chip Unrated Program Block  
This option lets you decide if programs that the V-Chip recognizes as “unrated” can be viewed. “Unrated” TV  
programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public  
announcements, and programs without ratings.  
View All unrated programs are available.  
Block All unrated programs are not available.  
Note: You must remember to lock Parental Controls for rating limits to take effect.  
Press the down arrow to highlight V-Chip unrated. Then press the right arrow to switch between Block and View.  
Lock/Unlock Parental Controls  
Selecting this option lets you lock and unlock parental controls settings using a password.  
If you do not lock parental controls, none of the settings for V-Chip, Channel Block, or Front Panel  
Block will take effect.  
If you forget your password, press the MENU button, then select Parental Control (the password entry  
screen appears). Simultaneously press and hold CH+ and VOL+ on the television for 3 seconds.  
Parental Controls unlock and the Parental Control menu appears so you can enter a new password.  
Front Panel Block  
Selecting this option lets you block (disable) or unblock (enable) the TV/DVD’s front panel. The remote  
still tunes to any channel. When using this as a Parental Control method, remove access to any  
remote that is capable of operating the television while you have the front panel blocked.  
Don’t forget to lock parental controls after you change the status. If you don’t, the front panel block  
will not take effect.  
Chapter 4  
25  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Features  
PIP (Picture-in-Picture) and POP (Picture-outside-Picture) Operation  
The PIP (picture-in-picture) feature lets you display a second, smaller picture on top of the main picture. POP  
(picture-outside-picture) lets you display two windows side by side.  
Note: PIP and POP are not available for DVI or component video sources (CMP1 or CMP2).  
PIP example  
POP example  
PIP and POP Buttons  
ON OFF  
VCR1  
TV  
DVD VCR2 AUX SAT CABLE  
There are several remote buttons that control the way the PIP window works:  
MUTE  
SKIP  
PIP Brings up the PIP window. Press again to bring up POP. Press again to remove the window.  
Up and down arrow buttons Let you move the PIP window to different corners of the screen. Up arrow  
moves PIP counterclockwise; down arrow moves PIP clockwise.  
GUIDE  
GO BACK  
INFO  
DISC MENU  
Left and right arrow buttons Switches the left POP window to the right side, and the right POP window  
to the left.  
ZO  
Arrow  
buttons  
OK  
O
M-  
O
M+  
ZO  
MENU  
CLEAR  
SWAP Switches, or “swaps,” the video from the PIP window with the main picture. Switches the main POP  
1
2
5
8
0
3
6
9
window, where the sound is coming from, with the other window.  
4
7
INPUT  
SOUND ANT  
PIP CH+ and CH- Lets you change channels in the PIP and right POP picture.  
REVERSE  
RECORD  
PLAY FORWARD  
STOP  
PAUSE  
PIP  
SWAP CH  
-
CH  
+
PIP buttons  
PIP  
26  
Chapter 4  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 5: Using the DVD Menu  
The DVD’s Menu System  
The DVD’s menu system is not the same as the disc menu or the Info Display. The DVD’s main menu comes up  
when there is no disc playing. If you are playing a disc, press STOP on the remote control to stop playback and  
bring up the DVD’s main menu.  
The Play/Resume Play Option  
To get to the DVD’s main menu, press STOP on the remote control. The first item in the main menu is the Play/  
Resume Play option. If there isn’t a disc in the TV/DVD, the option reads Play with the prompt Insert Disc to the  
right. If there is a disc in the TV/DVD and it was previously playing, the option reads Resume Play and the name  
of the disc is displayed on the right.  
Any time you stop playback, you will be returned to the DVD’s main menu, and the Play option will read  
Resume Play. To resume play, highlight the option and press OK, or press the PLAY button on the remote.  
Press OK to clear the screen and  
resume play.  
The Play Mode Menu  
The DVD’s Play Mode menu lets you choose different ways to play the disc. To see Play Mode menu options, a  
disc must be in the TV/DVD.  
1. If the disc is playing, press STOP (the DVD’s main menu appears).  
2. Highlight the Play Mode menu option.  
3. Press OK. The Play Mode menu items appear.  
4. Highlight the desired option and press OK. Program Play will not work unless you have created a program  
list.  
Selecting a Play Mode  
The first three options in the Play Mode menu determine in what order the titles or tracks will play on a disc.  
Standard Play: plays the disc’s titles and chapters in their default order (i.e., chapter 1 of Title 1 plays first,  
then chapter 2 of Title 1, etc.)  
Random Play: plays the chapters of each title in random order.  
Program Play: Plays the chapters on the disc in the order you have programmed (you must select Edit  
Program and set up the order in which you want the tracks on the disc to play).  
Selecting Random Play plays the  
disc’s tracks in random order.  
How to Create a Program  
To use the Program Play option, you must create a program list to set the order in which you want titles and  
chapters on a DVD video disc to play. To create a program list for an Audio CD or MP3 go to Chapter 7.  
Creating a Program List for a DVD Video Disc  
1. If the disc is playing, press STOP to stop playback (the DVD’s main menu appears).  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
4. The Title box is highlighted. Use the up/down arrows or the number buttons on the remote to enter the title  
you want to play first. The title number you entered appears in the Title box. The number of chapters  
available appears under the Chapter box.  
When the Title box is highlighted,  
enter the title number you want  
to place in the list.  
5. Highlight the Chapter box and use the up/down arrows or the number buttons on the remote to enter the  
chapter you want to play first and press OK. The highlight jumps to the Add button.  
6. Press OK to add that chapter to the Program List. The highlight jumps back to the Title box so you can add  
more titles and/or chapters. Make sure the Title box is highlighted and enter your next title and/or chapter.  
7. Continue adding titles/chapters as explained in steps 4-6 until your program is complete. You can play your  
program by highlighting Play and pressing OK, or you can save the program by highlighting Done and  
pressing OK. The program will be erased when you remove the disc from the TV/DVD.  
Graphics contained within this publication are for representation only.  
Chapter 5  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD Menu  
Editing a Program  
Deleting Chapters  
To delete chapters from the playlist:  
1. If the disc is playing, press STOP to stop playback (the DVD’s main menu appears).  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
4. Highlight the item in the playlist you want to delete.  
5. Highlight Delete, and press OK.  
To delete an entry from the  
playlist, highlight it, then  
highlight Delete and press OK.  
6. When you are finished rearranging the playlist, highlight Done and press OK.  
Inserting Chapters  
To insert chapters into the playlist:  
1. If the disc is playing, press STOP to stop playback (the DVD’s main menu appears).  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
4. Use the left/right arrow keys to move the highlight to the program list. Use the up/down arrow keys to mark the  
spot in the playlist where you want to insert a chapter (the inserted chapter will be placed before the  
highlighted chapter).  
5. Highlight the Chapter box and use the up/down arrows or the number buttons on the remote to enter the  
chapter you want to play first.  
6. Once you enter the number, the Insert box is highlighted. Press OK to insert the chapter in the playlist.  
7. When you are finished rearranging the playlist, highlight Done and press OK.  
AutoPlay  
You can set the AutoPlay option to play your disc automatically after you close the disc tray.  
1. From the DVD’s main menu (in DVD mode, no disc playing) highlight the Play Mode option and press OK.  
2. The Play Mode selections appear. Highlight the AutoPlay option and press OK to toggle the option on/off.  
3. Press the left arrow button to return to the previous menu or press GO BACK to return to the main menu.  
Dub Assist  
Dub Assist helps you record a CD onto an audio cassette tape by determining the number of tracks that will fit on  
one side of the tape so you have time to turn the tape over to record on the other side. For steps on how to use Dub  
Assist go to Chapter 7.  
IntroScan  
IntroScan plays the first 10 seconds of each track on an Audio CD or MP3 file. IntroScan will not repeat  
automatically. Once it has completed, the system will stop the disc and return to the main menu.  
To use IntroScan when playing a CD or MP3:  
1. Highlight Play Mode and press OK.  
2. Highlight IntroScan and press OK to begin the function.  
3. Press STOP to stop the IntroScan function.  
The Lock Menu  
The padlock icon is displayed on the DVD’s main menu which shows whether your DVD is locked or unlocked.  
Locked: A password is needed in order to play discs that aren’t included in the rating limits  
you have set. When the DVD is locked, no one can access the Lock Menu items without  
entering the password.  
Unlocked: A password isn’t required to play discs.  
Graphics contained within this publication are for representation only.  
28  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD Menu  
Locking Your DVD  
1. If the disc is playing, press STOP (the DVD’s main menu appears).  
2. Highlight Lock and press OK (the Lock menu items appear).  
3. Highlight Lock Player and press OK. The Enter New Password screen appears.  
4. Press the number keys on the remote to enter the password you want to use (similar to entering your  
PIN when you use a bank machine).  
5. After you’ve entered the last number in the password, press OK. Confirm Password appears.  
6. Enter the numbers you entered the first time and press OK when you’re finished.  
7. Press the left arrow to return to the main menu.  
Use the numbers on the remote to  
enter a password.  
Unlocking Your DVD  
1. If the disc is playing, press STOP (the DVD’s main menu appears).  
2. Highlight Lock and press OK.  
3. The Enter Password box appears. Enter your password and press OK (the Lock menu options appear).  
4. Highlight Unlock Player and press OK. The locked icon changes to unlocked.  
If you forget your password, simultaneously press and hold OPEN/CLOSE and the STOP on the TV/DVD’s front panel for 2 seconds. Enter a new  
password via the Lock menu .  
Changing Your Password  
The DVD must be locked to change the password.  
1. If the disc is playing, press STOP (the DVD’s main menu appears).  
2. Highlight Lock and press OK. Enter Password appears on the screen. Enter your password.  
3. Highlight Change Password and press OK. Enter New Password appears.  
4. Press the number buttons on the remote to enter the new password you want to use and press OK. Confirm Password appears.  
5. Press the number keys to enter the password again and press OK when you’re finished.  
Setting the Ratings Limits  
The Ratings Limits feature is a rating limit system, sort of like movie ratings. It works with DVD discs that have been assigned a rating. This helps you  
control the types of DVDs that your family watches.  
Note: When in DVD mode, the TV/DVD alerts you when you try to play a movie with a rating that exceeds the limit you’ve set. Some discs include a rating override feature. When  
you play a disc with this feature, the message Override Limit or Cancel Selection appears on the screen. If you choose to override the rating limit, you will need to enter your  
password to begin playback.  
Changing to a Different Country’s Rating System  
Some countries use different rating systems. The default for this TV/DVD is the United States. You can change to a different country’s rating system  
through the Lock menu.  
1. If the disc is playing, press STOP (the DVD’s main menu is displayed).  
2. From the main menu, highlight the Lock option and press OK (the Lock menu appears).  
3. Highlight Ratings Limits and press OK (the Ratings Limits menu appears).  
4. Highlight Country and press OK (a list of countries appears).  
5. Highlight the country you want to change to and press OK (the country you selected appears next to the Country path menu).  
6. Press the left arrow key to return to the main menu.  
Rated Titles  
The Rated Titles option lets you determine how your DVD will react to discs that contain movies that are rated (in the U.S.A., the Motion Pictures  
Association of America rates movies as G, PG, PG-13, etc.).  
You decide which ratings require a password and which ones don’t. This system ranks the ratings 1 through 8 in order to accommodate different  
countries’ ratings systems (1 is considered a movie title with the least offensive material).  
In order for the Rating Level feature to work, the disc must be encoded with rating information. If the author of the disc did not encode rating  
information, then this feature will not work for that disc.  
When in DVD mode, the TV/DVD must be locked in order for it to enforce the settings in the Ratings Limits part of the Lock menu.  
Graphics contained within this publication are for representation only.  
Chapter 5  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD Menu  
1. From the Lock menu, highlight Ratings Limits and press OK (the Ratings Limits menu is displayed).  
2. Highlight Rated Titles and press OK (the 8-level rating limits list appears).  
3. To change the rating limit, press the up or down arrow button.  
•
The ratings that don’t require a password (free access) appear under the bar, in the green part of the  
block.  
•
The ratings that require a password appear above the bar, in the red part of the block.  
4. When you have moved the bar to the desired setting, press OK. You are returned to the Rated Titles  
screen and the setting appears to the right of the Rated Titles option. For example, if you set 3 as the  
highest rating for Free Access (green), then the Rated Titles selection appears as 3 (that’s the DVD’s  
number for PG in the 8-level system) for the movie studio’s rating. This means when the DVD is locked, it  
will require you to enter the password to play any discs that are rated higher than 3 (i.e., PG-13 or NC-  
17).  
The Rated Titles screen lets you set the  
Rating Limit  
5. Press the left arrow button to return to the main screen.  
Unrated Titles  
Some titles (movies) aren’t rated, but may contain material that is unsuitable for children. You decide how  
you want the Ratings Limits feature to handle these discs: free access or password required. To set the  
Unrated Titles option:  
1. From the Lock Menu, highlight Ratings Limits and press OK.  
2. Highlight Unrated Titles and press OK. The Unrated Titles options appear.  
3. Use the up/down arrow buttons to highlight your choice: Free Access or Password Required. Press OK.  
You are returned to the previous screen, and the option you chose is displayed next to the Unrated Titles  
option.  
Choose Unrated Titles to set free  
access or require a password for  
unrated titles.  
4. Press the left arrow key to return to the main menu.  
System Test  
There are several tests you can run from the System Test menu. If a problem is found, the text will appear in light gray.  
1. Highlight System Test within the Lock menu.  
2. Press OK to display the System Test Results screen.  
3. Press the left arrow key to return to the main menu.  
The Display Menu  
The Display menu contains the settings that affect how disc content looks on your TV/DVD.  
TV Image  
The TV Image menu adjusts the way a movie appears on your TV/DVD.  
1. From the DVD’s main menu (in DVD mode, no disc playing), highlight Display and press OK (the Display options appear).  
2. Highlight TV Image. Press OK. The TV Image options appear.  
4 x 3 Letterbox – Choose this setting when receiving a 4:3 image with subtitles ON. You’ll see the entire frame of the movie, but it will take up a  
smaller portion of the screen vertically to accommodate subtitles. The movie might appear with black bars at the top and bottom of the screen.  
4 x 3 Standard – Choose this setting when receiving a 4:3 image and you want the on-screen appearance of the video to be a centered picture  
with black side panels (blank area) on the right and left sides. Most discs produced in a widescreen format can’t be cropped in this fashion. This  
means the black bars appear at the top and bottom of the screen.  
16 x 9 Standard – Choose this setting to view 16:9 formatted DVD’s. Most DVD’s will force the viewing to this mode. Also choose this if you  
want a 4:3 image to adjust horizontally to fill the 16:9 screen. Black side panels won’t be added, and the image is vertically unaltered.  
On-Screen Displays  
This feature lets you select whether you want certain on-screen displays to appear on the screen. It contains three choices with check boxes next to  
them:  
•
•
•
Information Display – When turned on, displays time transport information when you are fast forwarding or reversing playback.  
Angle Indicator – When turned on, displays camera angle icon if more than one camera angle is available.  
Scene Again™ Text – When turned on, displays subtitles when you use the Scene Again™ feature.  
The default is to show all on-screen displays. To turn one of the options on or off, highlight an option and press OK. This toggles the option on or off.  
Graphics contained within this publication are for representation only.  
30  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD Menu  
The Sound Menu  
The Sound menu lets you select different sound settings to match the equipment you have connected to your unit.  
Digital Output  
Digital output lets you choose which type of digital audio is output from your unit. If you’ve used an optical cable to connect a Dolby Pro Logic,  
Dolby Digital, or DTS receiver, you must adjust this setting. There are two options:  
•
•
Dolby Digital: Choose this setting if you connected a Dolby Digital receiver.  
DTS: Choose this setting if you connected a DTS receiver or decoder to your unit.  
The default is Dolby Digital. To change the digital output:  
1. From the main menu, highlight and select the Sound option and press OK (the Sound menu is displayed).  
2. Highlight the Digital Output option and press OK.  
3. Highlight the desired output and press OK.  
4. Press the left arrow key to return to the main menu.  
Notes: If you set Digital Output to DTS, you must have your unit connected to a receiver or decoder with the DTS feature and  
the disc you play must support the DTS audio format. If you choose DTS and your receiver or decoder doesn’t support DTS, you  
won’t hear any audio.  
If you don’t want to make any changes, press CLEAR to return to the main menu or GO BACK to return to the Speaker Setup  
menu.  
Select the Digital Output option from  
the Sound menu.  
Sound Logic  
The Sound Logic feature compresses the dynamic range (quietest sound to loudest sound) of a disc’s  
soundtrack. For example, action scenes might be very loud, while whispered dialog is quiet. The Sound Logic  
feature evens out the range of the volume by making loud sounds quieter and soft sounds louder. The Sound  
Logic option is a toggle, it can be turned on or off.  
The default setting is off. To turn the Sound Logic feature on:  
1. From the DVD’s main menu, highlight Sound and press OK (the Sound menu appears).  
2. Highlight the Sound Logic option and press OK.  
3. Press the left arrow button to return to the main menu.  
Select the Sound Logic option from the  
Sound menu and press OK to toggle  
Sound Logic on or off.  
Note: The performance of the Sound Logic feature varies depending on the type of equipment you have connected to your TV/  
DVD and the audio format of the disc you’re playing.  
The Languages Menu  
The Languages menu enables you to choose different language options for audio, subtitles, Disc Menu items  
and DVD main menu items. The default for all Language menu items is English.  
Changing the Player Menus, Disc Menus, Audio or Subtitles Language Preferences  
You can choose one of the languages for the text that appears within the on-screen menu system.  
1. From the main menu, highlight and select the Languages option (the Languages menu is displayed).  
2. Highlight the language option for the language you want to change and press OK (the language choices  
are displayed).  
Select the language option you want to  
change.  
3. Highlight the language you want to use and press OK. The menu appears with your selection shown next  
to the language option.  
4. Press the left arrow button or press GO BACK to return to the previous menu.  
Notes: If you change the Player Menu Language, the entire DVD’s menu system will be displayed in the selected language.  
The option Original in the Audio Language menu is the language in which the audio was originally recorded.  
How to Set Other in Disc Menus, Audio or Subtitles Language  
If the language you want to use isn’t listed, you can use the Other option to select the language of your  
choice.  
1. From the main menu, highlight and select the Languages option (the Languages menu is displayed).  
2. Highlight the language option you want to change to Other and press OK (the language options are  
displayed).  
3. Highlight Other and press OK.  
(steps continued on next page)  
Graphics contained within this publication are for representation only.  
Chapter 5  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the DVD Menu  
4. Enter the code from the Language Codes list at the end of this chapter and press OK (the previous menu appears with your selection shown next  
to the language option you changed).  
5. Press the left arrow button or press GO BACK to return to the previous menu screen.  
Note: Remember, your TV/DVD can’t play the disc in the language you have chosen if the disc wasn’t created with that language option.  
Glossary  
The glossary contains definitions and information about the features and controls when in the DVD mode.  
1. If the disc is playing, press STOP (the DVD’s main menu appears).  
2. Highlight Glossary and press OK (the Glossary appears).  
3. Use the arrow buttons on your remote to highlight different terms. The definitions appear on the right side of the screen.  
Some glossary definitions are more than one page. The scroll icon appears in the definition box to let you know when there’s a second page.  
To see the rest of the definition:  
a. Press the right arrow button. The glossary definition is highlighted.  
b. Press the down arrow button. The second page of the definition appears.  
c. Press the up arrow button to return to the first page of the definition or press GO BACK to return to the main menu.  
4. Press the left arrow button to return to the DVD’s main menu.  
Code List  
Don’t forget to press the OK button after you enter the code.  
Language  
Code  
Language  
Code  
Language  
Code  
Language  
Code  
Sindhi  
8368  
8373  
8383  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6673  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
French  
Frisian  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7369  
7375  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
8287  
7589  
8278  
7579  
7585  
7679  
7665  
7686  
7678  
Lithuanian  
Macedonian  
Malagsy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Naru  
Nepali  
Norwegian  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaero-Romance  
Romanian  
Russian  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7967  
7982  
7977  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
8285  
8377  
8371  
8365  
7168  
8382  
8372  
8384  
8478  
8378  
Singhalese  
Siswati  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Hindi  
Basque  
Tamil  
Tatar  
Bengali; Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
Irish  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Uzbek  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Servo-Croatian  
Sesotho  
Setswana  
Shona  
Vietnamese  
Volapük  
Welsh  
Wolof  
Xhosa  
Yiddish  
Yoruba  
Zulu  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
Finnish  
Graphics contained within this publication are for representation only.  
32  
Chapter 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 6: Using the TV’s Menu System  
Sound Menu  
Sound settings Displays a choice list that lets you adjust the TV/DVD’s speakers and subwoofer.  
Left & Right balance Use the left or right arrow to center the bar under the arrow to balance the  
left and right speakers.  
Amplifier Use the left or right arrow to select External (if your TV/DVD is using external  
amplifier only) or Internal (if your TV/DVD is using the speakers in the TV/DVD).  
Subwoofer Set the subwoofer to External, if the TV/DVD is using an external subwoofer; or None.  
Sound type Press the right arrow to scroll through the available audio types, which control the way  
the sound comes through your speakers.  
Mono Plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo  
signals.  
Stereo Splits the incoming stereo audio signal into left and right channels. Most TV programs and  
recorded materials have stereo audio. The word Stereo appears on the TV/DVD when you tune to a  
program that is broadcast in stereo.  
Automatic Chooses the sound type according to the current signal.  
Sound Mode Press the right arrow to scroll through the available audio modes, which provides special  
processing through your speakers and depends on how you set the sound type.  
Normal Does not give any special processing, simply provides mono or stereo sound.  
Wide Available only for mono signals. “Widens” sound from mono broadcasts and mono  
components connected to your TV/DVD for a fuller, more spacious sound.  
Magic Available only for stereo signals. Gives a surround effect with more bass.  
Dolby Virtual Available only for stereo signals. Creates a virtualized surround sound experience  
from two speakers using the Dolby Pro Logic decoding. It provides the sensation of being  
surrounded by additional speakers.  
Surround effect Controls the amount of surround sound in Dolby Virtual sound mode.  
Second Audio Program (SAP) Plays the program’s audio in a second language, if one is available. The  
TV/DVD displays the word SAP when you tune to a program that is broadcast with SAP information. SAP  
audio is broadcast in mono. SAP is also used to broadcast a program’s audio with descriptions of the  
video for the visually impaired.  
Automatic sound level Reduces the annoying blasts in volume during commercial breaks, and also  
amplifies softer sounds in program material. Eliminates the need to constantly adjust volume control.  
Headphone settings Displays a choice list of available settings you can adjust: Volume, Bass and Treble.  
The Headphone sound option allows you to choose stereo, mono or automatic. These descriptions are  
same as sound type above.  
Graphic equalizer Allows you to choose a specific sound through the Sound Preset option. Press the  
right arrow to cycle through the options: Standard, Movie, Voice, Music, Flat, Videogame, Video camera  
and Personal.  
The Frequency range displays the different treble and bass bands set for each Sound Preset option. You  
can choose a band and make adjustments. When you make adjustments, the Sound Preset option  
automatically changes to Personal. Press the left or right arrow button to select the frequency (Bass  
100Hz, Mid Bass 500Hz, Medium 1.5kHz, Mid Treble 5kHz, Treble 10kHz) you want to adjust. Then use  
the up or down arrow button to adjust the decibel.  
To view the frequency range of another Sound Preset option, press the right arrow until no band is  
selected and Frequency range is highlighted. Then press the up arrow to highlight Sound Preset.  
Picture Menu  
The Picture menu options apply to the video for the main TV and video input selections.  
Advanced picture settings  
Contrast expand Adjusts the contrast of the picture according to the light of the room. Press the  
right arrow to choose between Low, Medium or High.  
SVM (Scan Velocity Modulation) Improves the sharpness of the picture by changing the speed of  
the cathode-ray tube’s electron beam when it transitions between dark and light areas of the  
screen. Choose to have it on (box checked) or off (box unchecked), depending on your preference.  
Autoformat When enabled (box checked) the TV automatically detects the screen format the  
signal is sending for each channel, as well as input channels.  
Graphics contained within this publication are for representation only.  
Chapter 6  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Menu System  
Video noise reduction Allows you to choose a setting to reduce picture “static” or any type of interference. It is especially useful for providing a  
clearer picture in weak analog signal conditions. Press the right arrow to choose between: Off for no noise reduction; Minimum for a softer,  
smoother picture and retains picture sharpness and detail; Medium for a slightly softer picture than the Minimum setting; Maximum for an even  
softer, smoother picture than the other settings. However, the picture detail is somewhat decreased.  
Note: Autoformat and Video noise reduction are available for DVI, CMP1 and CMP2 inputs if the signal is 480i.  
Picture Presets Displays a choice list that lets you select one of the preset picture settings: Movie, Videogame, Personal, Sports, Ideal, Showroom or  
Video Camera. Choose the setting that is best for your viewing environment.  
Black Level Adjusts the brightness of the picture.  
Color Adjusts the richness of the color.  
Contrast Adjusts the difference between the light and dark areas of the picture.  
Sharpness Adjusts the crispness of the edges in the picture.  
Note: You can adjust sharpness for each channel. This is useful if channels appear fuzzy.  
Color Warmth Displays a choice list that lets you set one of three automatic color adjustments: Cool for a more blue palette of picture colors;  
Normal; and Warm for a more red palette of picture colors. The warm setting corresponds to the NTSC standard of 6500 K.  
Tint Adjusts the balance between the red and green levels.  
Note: Tint not available for DVI, CMP1 and CMP2 inputs.  
When you change any of these picture settings, the Picture Preset changes to personal. Use the left or right arrow button to make adjustments. To  
return to the Picture menu, press the up or down arrow button.  
Channel Guide Menu  
Allows you to view and select from the entire channel list and their labels. Press the GUIDE button to  
bring up the Channel Guide menu. Use the up or down arrow to scroll through the list. Press OK to select  
and tune to the chosen channel.  
Time Menu  
Sleep Timer Lets you set the TV to turn off after a given time.  
Time Lets you enter the current time. If it is eight o’clock, for example, you must first enter the number  
zero, then number eight. Use the OK button to choose between AM and PM.  
Wake up timer Lets you set the TV to turn itself on. When you turn on Wake up timer, the following  
options appear:  
Wake up time Lets you set the time you want the TV to turn itself on.  
Wake up duration Lets you set how long you want the TV to stay on when it turns on.  
Channel number Lets you select a specific channel the TV tunes to when the wake up timer is set.  
Daily Lets you choose if you want the wake up timer to turn on daily.  
Parental Control Menu  
The Parental Control Menu was explained in Chapter 4. Go to page 23 for more information.  
PIP Menu  
Display Mode  
Off No window is displayed.  
PIP PIP (single) window is displayed.  
POP POP (double) window is displayed.  
PIP channel Allows you to choose the channel displayed in the PIP or main POP window. Scroll through  
channel list as well as the VID1, VID2 and FRNT input channels.  
PIP size Allows you to choose having a Small, Medium or Large PIP window.  
PIP position Allows you to choose having the PIP window in the Top right, Top left, Bottom right or  
Bottom left part of TV.  
Note: Pip size and position are not available for POP.  
Graphics contained within this publication are for representation only.  
34  
Chapter 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TV’s Menu System  
Setup Menu  
Channel setup  
Signal Type TV chooses signal type during initial setup. If you change cable after setup, choose  
Cable if you are using cable or a cable box for TV signals. Choose UHF/VHF Antenna if you are  
using an off-air antenna for TV signals.  
Auto channel search Searches for channels the signal is receiving. Go to page 13 for more  
information.  
Auto channel update Searches for any new channels that are not in your channel list and adds  
them to the list.  
List and labels Edit the channels in the list or choose labels for each channel. Go to page 13 for  
more information.  
Preferences  
Language Displays a choice list that lets you select your preferred language for the menus:  
English, Spanish or French.  
Maximum volume Allows you to set how high volume turns up when you press the VOL+ button.  
Highlight Maximum volume, then press and hold OK to hear is the maximum volume. Make sure  
the volume has not been muted or turned all the way down.  
Curtain effect Reveals or hides the picture by giving it a “stage curtain” effect when the TV is  
switched on or off.  
Special features Auto on switches your TV on after a power outage; Auto channel tunes the TV to  
the channel you specify as the Initial channel when Auto on is enabled; Auto volume tunes the TV  
to the volume you set in Initial volume when Auto on is enabled.  
Closed Caption Many programs are encoded with closed-captioning information, which lets you  
display the audio portion of a program as text on the TV screen.  
Closed captioning is not available on all channels at all times. Only specific programs encoded with  
closed-captioning information are applicable. When a program is closed captioned, CC is displayed in  
the channel banner. See Chapter 4 for more information about the channel banner. The closed caption  
options are:  
Closed caption setting Displays a choice list that lets you choose the way closed captioning  
information is shown on the screen. Closed-captioning is not available with the high resolution  
input.  
Off No captioning information displayed.  
On always Captioning information shown always, when available.  
On when mute Displays captioning information, when available, whenever the TV’s sound is  
muted by pressing the MUTE button. The captioning information is not displayed when the  
sound is not muted.  
Closed-Caption Mode Displays a choice list that lets you choose which captioning mode is used  
for displaying captioning information. If you are unsure of the differences among the modes, you  
may prefer to leave the closed captioned mode set to CC1, which displays complete text of the  
program in the primary language in your area.  
Autotuning Displays a choice list that lets you set up the TV to automatically tune to the correct  
input channel when you press a component button (VCR1, DVD, VCR2, SAT•CABLE, etc.) on the remote.  
Go to Chapter 4 for details about the Autotuning feature.  
Convergence Auto convergence automatically adjusts the TV’s tubes; Red convergence displays the  
Red convergence screen, allowing you to use the arrow buttons to align the red and green images;  
Blue convergence displays the Blue convergence screen, allowing you to use the arrow buttons to align  
the blue and green images.  
Graphics contained within this publication are for representation only.  
Chapter 6  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7: Information Displays  
Using the Info Display  
Your TV/DVD gives you many options when playing different types of discs. You can access these features through the on-screen Info Display.  
To access the Info Display while a disc is playing, press INFO on the remote. The Info Display appears across the top of the screen. Each of the playback  
features is represented by an icon. To access a feature, use the arrow buttons on the remote to highlight the icon. Each feature that can be accessed  
from the On-Screen Info Display is described on the following pages. To clear the Info Display from the screen, press INFO on the remote control.  
Audio CD Info Display  
Repeat  
Bookmarks  
IntroScan  
Play Mode  
MP3 Info Display  
Repeat  
Play Mode  
IntroScan  
Video CD Info Display  
Index  
Repeat  
Audio  
Using the Time Display  
The Clock part of the Info Display shows the current disc time. To see the current disc time:  
1. Press INFO on the remote (the Info Display appears).  
2. Highlight the Clock icon. Press OK. The amount of time the track has played appears in the time window.  
3. Press INFO to clear the screen.  
Selecting a Specific Track  
1. Press INFO on the remote.  
2. Highlight the Track icon.  
3. Use the number buttons on the remote to enter the track number you want to play, or use the up/down arrow  
buttons to scroll through the track numbers. You may need to press the OK button on the remote after you enter a  
single digit track number.  
Graphics contained within this publication are for representation only.  
36  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information Displays  
Selecting a Specific Index (Available only on Video CDs)  
1. Press INFO on the remote.  
2. Highlight the Index icon from the Info Display.  
3. Use the number button(s) on the remote to enter the index number you want to play, or use the up/down arrows to scroll  
through the index numbers. When a new index number is entered, that index will begin playing.  
Selecting a Play Mode (Available only on Audio CDs and MP3s)  
The Play Mode feature lets you set up the order in which you want the tracks on the disc to play. There are three options:  
Standard: the tracks play in the order listed on the CD (starting with track 1). MP3 files are listed in the order they were  
recorded.  
Random: the tracks on the disc play in random order.  
Program: the tracks on the disc play in the order you’ve programmed. You must first create a program list in the Play menu of  
the DVD’s main menu.  
Switching between Standard and Random Play  
Standard (the order listed on the disc) is the default setting for the DVD mode. To change the default setting:  
1. Press INFO on the remote while a disc is playing. The Info Display appears.  
2. Highlight the Play Mode icon. The current play mode appears in the text box underneath the icons. Press the up/down  
arrow buttons to scroll through the play mode choices until Random appears in the text box. The tracks on the disc will  
now play in random order.  
Note: The TV/DVD defaults to Standard playback whenever you put a new disc into your TV/DVD.  
Using the Program Play Feature  
To use the Program Play feature, you must enter the order in which you want the tracks on the CD or MP3 to play by creating  
a program. This is done from the DVD’s main menu.  
To edit a CD:  
1. If the disc is playing, press STOP to stop playback (the DVD’s main menu appears).  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
4. The Track box is highlighted. Use the number buttons on the remote to enter the track you want to play  
first. The track number you entered appears in the Track box and the cursor highlights Add.  
5. Press OK to add that track to the Program List. The cursor jumps to the next spot in the Program List  
section. Make sure the Track box is highlighted and enter your next track.  
Use the Edit Program screen to create  
your own playlist.  
6. Continue adding tracks as explained in steps 4-5 until your program is complete. You can play your  
program by highlighting Play and pressing OK, or you can save the program by highlighting Done and  
pressing OK. If you save the program, you can select it from the Info Display. The program will be erased  
when you remove the disc from the disc tray or the TV/DVD is turned off.  
To edit a MP3:  
Standard Playlist  
Standard Playlist  
1. If the disc is playing, press STOP to stop playback (the DVD’s main menu appears).  
Add  
TKGIVING.MP3  
TKGIVING.MP3 00:04:01  
WOODS.MP3  
00:06:35  
WOODS.MP3  
Delete  
UP SUBDIRECT  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
Play  
ANGEL.MP3  
BELLS.MP3  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
Done  
CODANCE.MP3  
Total:  
2
00:10:36  
4. The Standard Playlist box is highlighted. Use the up/down arrow buttons on the remote to enter the  
track you want to play first.  
Path : /WOODS.MP3  
Type : MP3  
Size :6325 K  
Bit Rate : 128 Kb/s  
Artist : GeorgeWinston  
Title :Woods  
5. Highlight Add to add that track to the Program List and press OK.  
This is where the two lines of context sensitive help  
will be located.  
6. Continue adding tracks as explained in steps 4-5 until your program is complete. You can play your  
program by highlighting Play and pressing OK, or you can save the program by highlighting Done and  
pressing OK. If you save the program, you can select it from the Info Display. The program will be erased  
when you remove the disc from the disc tray or the TV/DVD is turned off.  
Graphics contained within this publication are for representation only.  
Chapter 7  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information Displays  
Editing a Playlist  
1. If the disc is playing, press STOP to stop playback. The DVD’s main menu appears.  
2. Highlight Play Mode and press OK (the Play Mode menu appears).  
3. Highlight Edit Program and press OK (the Edit Program screen appears).  
4. Highlight the item in the playlist you want to delete.  
5. Highlight Delete, and press OK.  
6. When you’ve rearranged the playlist and/or deleted all the tracks necessary, press OK.  
Using the Repeat Feature  
The default mode for the Repeat feature is Off. There are three Repeat options for Audio CDs:  
Disc – repeats the disc that is playing  
Track – repeats the track that is playing  
A•B – Set the beginning (point A) and the end (point B) to make this part of the CD play repeatedly.  
•
•
•
To Use Repeat:  
1. While a disc is playing, press INFO on the remote to bring up the Info Display.  
2. Highlight the Repeat icon. The text in the text box below the icons will read Repeat Mode: Off.  
3. Press the up/down arrow buttons to scroll through the Repeat options until the Repeat option you want is  
displayed in the text box.  
4. Press OK. The selected repeat option will loop repeatedly until you turn Repeat off. Repeat is turned off by  
completing steps 1 through 3 above, and selecting the Off option.  
A•B Repeat (Available only on Audio CDs)  
A•B Repeat lets you define a specific segment on the disc that you want to repeat:  
1. Find the spot on the disc that is a few seconds before the beginning of the part you want to repeat (this  
gives you time to access the Info Display and the Repeat feature).  
2. Press INFO on the remote and select the Repeat icon from the Info Display.  
3. Press the up/down arrow buttons until the A•B Repeat option is shown in the text box underneath the icons.  
The text box reads Repeat Mode: A-B Press OK to Set A Point.  
4. At the beginning of the part you want to repeat, press OK to set the A point.  
5. When you get to the part of the disc that you want to be the end of the repeated segment (the B point),  
press OK. The segment will repeat until you turn Repeat off.  
6. To make the Info Display disappear from the screen, press the INFO button on the remote.  
How to Cancel Repeat  
There are three ways to cancel Repeat:  
•
•
•
Press STOP twice.  
Go to the Repeat icon in the Info Display and select Off.  
Eject the disc.  
Changing the Audio Channel Output (Available only on Video CDs)  
If you are playing a stereo Video CD, you can change the channel output.  
1. Press INFO on the remote to bring up the Info Display.  
2. Highlight the Audio Channel icon on the Info Display.  
3. The audio channel choices appear in the text box. Use the up/down arrow keys to scroll through the choices:  
Stereo, Left, Right or Mono. Whatever choice is displayed becomes the active choice.  
Graphics contained within this publication are for representation only.  
38  
Chapter 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Information Displays  
Using IntroScan (Available only on Audio CDs and MP3s)  
IntroScan plays the first ten seconds of each track on the CD (similar to the scan feature that’s on many car  
radios). To use IntroScan:  
1. Press INFO on the remote (the Info Display appears).  
2. Highlight the IntroScan icon. Press OK. The first ten seconds of each track will play.  
•
•
After IntroScan goes through all of the tracks, it stops.  
If you want to stop IntroScan while it’s in progress, press PLAY on the remote. The current track starts  
playing in its entirety.  
•
You can also access IntroScan from the Play Mode menu in the DVD’s main menu.  
Using Bookmarks (Available only on Audio CDs)  
To store, use and clear bookmarks, go to page 21. The instructions are the same.  
Dub Assist (Available only on Audio CDs)  
Dub Assist helps you record a CD onto an audio cassette tape by determining the number of tracks that will fit  
on one side of the tape so you have time to turn the tape over to record on the other side. Dub Assist does not  
have an icon on the Info Display bar. It is activated through the DVD’s Play menu.  
To use Dub Assist when you’re recording a CD onto an audio cassette:  
1. Press STOP if a CD is playing (the DVD’s main menu appears).  
2. Highlight Play Mode and press OK (the Play Mode options appear).  
3. Highlight Dub Assist and press OK (the Dub Assist screen appears).  
4. The highlight should be in the Play Order window. Choose Standard, Optimized, or Program.  
Standard: This is the default mode. The tracks are recorded in the order on the CD (track 1 is recorded first,  
track 2 second, etc.)  
Optimized: The tracks are recorded in the order that optimizes the number of tracks that can fit on one side  
of the audio cassette so you have the least amount of dead space at the end of the tape.  
Program: The tracks are recorded in the order you program. You must create your program in the Edit  
Program menu that’s in the DVD’s Play menu.  
5. Use the arrow keys to highlight the Segment Length box. When the Segment Length box is highlighted,  
use the up/down arrow buttons to enter the length of one side of the audio cassette.  
6. The order the tracks will be recorded in appears in the Segment Length box. Use the arrow keys to  
Use the Dub Assist screen to  
determine how many CD tracks can  
fit on a cassette.  
highlight the Start box and press OK.  
7. Follow the instructions on the screen to begin recording.  
Graphics contained within this publication are for representation only.  
Chapter 7  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 8: Other Information  
Troubleshooting  
Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list.  
Note: If you prefer, we can provide you with the name of an Authorized Service Representative who will visit your home for a fee to install your electronic entertainment system  
and to instruct you in its operation. For details about this service, call 1-888-206-3359 or visit rcascenium.com.  
DVD Problems  
Player won’t work  
•
Reset the TV/DVD by unplugging the AC power cord and plugging it back in.  
Disc won’t play  
•
•
•
Insert a disc with the label side facing up.  
Check the type of disc you put into the disc tray. This TV/DVD only plays DVD video discs, Video CDs, audio CDs and MP3s.  
If the disc is a DTS music CD, it requires a DTS decoder. If you have a DTS receiver hooked up to your TV/DVD and you are still not getting sound, make sure  
the sound is set correctly (see Chapter 5).  
•
Both the TV/DVD and the disc are coded by region. If the regional codes don’t match, the disc can’t be played. This TV/DVD is Region No. 1.  
Play starts, but then stops immediately  
•
The disc is dirty. Clean it.  
•
Condensation has formed. Allow player to dry out.  
No sound or distorted sound  
•
•
•
•
Make sure your TV/DVD is connected properly. Make sure all cables are securely inserted into the appropriate jacks.  
You may need to readjust the Digital Output settings from the Sound menu (see Chapter 5).  
Sound is muted during still, frame advance, or slow-motion play.  
If you connected an audio or audio/video receiver to your TV/DVD, make sure you chose the correct input setting on the receiver.  
Can’t advance through a movie  
•
You can’t advance through the opening credits and warning information that appear at the beginning of movies because the disc is programmed to  
prohibit that action.  
The  
icon appears on screen  
•
The feature or action cannot be completed at this time because:  
1.  
2.  
3.  
4.  
The disc’s software restricts it.  
The disc’s software doesn’t support that feature (e.g., angles).  
The feature is not available at the moment.  
You’ve requested a title or chapter number that is out of range.  
The picture is distorted  
•
The disc might be damaged. Try another disc.  
Picture is distorted during forward and reverse scan  
•
It is normal for some distortion to appear while scanning.  
A screen saver appears on the screen  
•
Your TV/DVD is equipped with a screen saver that appears on the screen after the DVD mode has been idle for several minutes. Press STOP or GO BACK on  
the remote to make the screen saver disappear from the screen and return to the DVD’s main menu.  
Subtitle and/or audio language is not the one selected from the initial setting  
•
If the subtitle and/or audio language does not exist on the disc, the initial settings will not be seen/heard. The disc’s priority language is selected instead.  
Set the subtitle and/or audio language manually through the Info Display or the DVD’s main menu.  
40  
Graphics contained within this publication are for representation only.  
Chapter 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
The menu is displayed in a foreign language  
•
The Menu Language preference is set to that language. From the DVD’s main menu, select the Languages option (In Spanish, shown as Idiomas; in French,  
as Langues). From the Languages menu, select the Player Menus option (In Spanish, shown as Menús del Lector; in French, as Menus Lecteur). Highlight  
the language you prefer and press OK.  
No forward or reverse scan  
•
Some discs have sections that prohibit rapid scanning, or title and chapter skip.  
•
If you’re trying to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often  
programmed to prohibit skipping through it.  
Camera angle cannot be changed  
•
Some discs don’t have the multi-camera angle system, and some discs only have it in certain parts of the movie.  
Picture is too tall and thin  
•
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter 5).  
Picture is too short and wide  
•
Change the aspect ratio using the TV Image setting in the Display menu (see Chapter 5).  
Cannot copy discs to video tape  
•
You can’t record DVD discs onto videocassettes because the discs are encoded with anti-copy protection.  
Full Version of Disc Does Not Play  
•
The DVD might be locked. To unlock see Chapter 5.  
Disc won’t eject  
•
When you put a disc into the disc tray, it may take up to 15 seconds to read the disc. You won’t be able to eject the disc during this time. Wait 15 seconds  
and try again.  
I don’t remember my password and I want to unlock the DVD  
•
If you forget your password, simultaneously press and hold OPEN/CLOSE and STOP on the TV/DVD’s front panel for 3 seconds. Enter a new password via the  
Lock menu.  
TV Problems  
TV won’t turn on  
•
•
•
•
Press the TV button.  
Make sure the TV is plugged in.  
Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.  
Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control  
solutions on page 43.  
•
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the  
Parental Control menu and press OK to uncheck the box.  
Buttons don’t work  
•
If you’re using the remote control, press the TV button first to make sure the remote is in TV mode.  
•
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Front Panel Block in the  
Parental Control menu and press OK to uncheck the box.  
•
Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.  
TV turns off while playing  
•
Sleep timer may have been activated. Go to page 34 for instructions.  
•
Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the  
voltage in your house may be abnormally high or low.  
•
Unplug. Wait five minutes. Plug in again.  
Chapter 8  
41  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
TV turns on unexpectedly  
•
•
•
Wake up timer might have been activated. Go to page 34 for instructions.  
Auto on might have been activated. Go to page 34 for instructions.  
You might have pressed CH+, CH- or INPUT on the remote accidentally.  
Blank screen  
•
Make sure the component connected to the TV is turned on.  
•
Try another channel.  
No sound, picture okay  
•
•
•
•
Maybe the sound is muted. Try pressing the volume up button to restore sound.  
If using S-Video or Y, PB, PR, remember to also connect the component’s left and right audio output jacks to the TV’s L/MONO and R Audio Input jacks.  
Make sure the INT/EXT switch on the back of the TV is put on “INT”.  
The sound settings may not be set correctly. Go to page 33 for more information.  
Can’t select certain channel  
•
Channel may be blocked or not approved in the Parental Controls menu.  
•
If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR).  
Noisy stereo reception  
•
May be a weak station. Use Sound menu to choose mono sound.  
No picture/blue screen, no sound but TV is on  
•
•
•
Maybe the cable/air function is set to the wrong position. Go to page 35 for detailed instructions.  
The channel might be blank — change channels.  
If you’re watching your VCR and it’s connected with coaxial cable to the CABLE/ANTENNA jack, tune the TV to channel 3 or 4 (whichever channel is  
selected on the 3/4 switch on the back of your VCR). Also check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR  
button on your VCR).  
Sound okay, picture poor  
•
Check antenna connections. Make sure all of the cables are firmly connected to the jacks.  
•
Try adjusting sharpness function to improve weak signals. Go to page 34 for more instructions.  
Volume buttons not adjusting volume louder  
•
Check to make sure volume isn’t limited by the maximum volume feature. Go to page 35 for more instructions.  
Picture not moving  
•
You have activated the Freeze feature by pressing OK on the remote. Press any button to “unfreeze” the picture.  
Black box appears on the screen  
•
Closed-captioning might be on. Check Closed Caption in the Setup menu. Go to page 35 for more instructions.  
Freeze not working  
•
The freeze feature is not available for Component video (CMP1 or CMP2) or DVI inputs.  
Low battery warning appears on screen  
•
Place new batteries in remote.  
42  
Chapter 8  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
The Remote Control Doesn’t Work  
•
•
•
•
Something might be between the remote and the remote sensor on the component. Make sure there is a clear path.  
Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate.  
Maybe remote is not in TV Mode. Press the TV button so remote will control TV.  
Maybe batteries in remote are weak, dead, or installed incorrectly. Put new batteries in the remote. (Note, if you remove the batteries, you may have to  
reprogram the remote to operate other components.)  
•
You might need to drain the remote’s microprocessor: remove batteries and press the number 1 button for at least 60 seconds. Release the 1 button,  
replace the batteries, and (if necessary) program the remote again.  
Problems with V-Chip/Parental Controls  
The rating limits don’t work  
•
You must lock the settings. Go to the MAIN MENU (press MENU on your remote), select Parental Control, select Lock Parental Controls.  
I don’t remember my password and I want to unlock the TV  
•
If you forget your password, press MENU, then select Parental Control (the password entry screen appears). Simultaneously press and hold CH+ and VOL+  
on the TV’s front panel for 3 seconds. The Parental control menu appears on the screen, and you can re-enter a password via Lock Parental Controls.  
The V-Chip won’t let me watch a program even though it’s not rated as violent.  
•
Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must set NR to View separately in order to view movies with an  
NR rating.  
Care and Cleaning  
CAUTION: Turn OFF your TV/DVD before cleaning.  
You can clean the TV/DVD as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure  
adequate ventilation.  
The TV/DVD’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a  
cloth dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of  
cleaners will damage the TV/DVD.  
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV/DVD. Also, avoid placing drinks or  
vases with water on top of the TV/DVD. This could increase the risk of fire or shock hazard or damage to the TV/DVD.  
Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently imprinted on  
the picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. may cause similar damage. This damage is  
not covered by your warranty.  
Handling Cautions  
•
•
•
•
•
•
Before connecting other components to this TV/DVD, be sure to turn all components off.  
Don’t move the TV/DVD while a disc is being played. The disc may get scratched or broken, and the TV/DVD’s internal parts may be damaged.  
Don’t put any container filled with liquid or any small metal objects on the TV/DVD.  
Be careful not to put your hand into the disc tray.  
Don’t place anything other than the disc in the disc tray.  
Exterior influences such as lightning and static electricity can affect normal operation of this player. If this occurs, turn the TV/DVD off and on  
again with the ON•OFF button, or disconnect and then reconnect the AC power cord to the AC power outlet. The TV/DVD will operate normally.  
•
Be sure to remove the disc and turn off the TV/DVD after use.  
Formation of Condensation  
•
Due to sharp changes in temperature and humidity, condensation may form if warm air comes in contact with any cold parts inside the TV/DVD.  
•
When condensation forms inside the TV/DVD, it may not operate correctly. If this occurs, leave the TV/DVD at room temperature until the inside of  
the disc tray becomes dry and operational.  
•
If condensation forms on a disc, wipe the disc with a soft, dry cloth by moving the cloth from the center hole toward the outer edge.  
Chapter 8  
43  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Limited Warranty  
What your warranty covers:  
•
Defects in materials or workmanship.  
For how long after your purchase:  
•
•
•
One year from date of purchase for labor.  
One year from date of purchase for parts.  
Two years from date of purchase for the picture tube.  
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm, whichever comes first.  
What we will do:  
•
Pay an Authorized Service Center the labor charges to repair your unit.  
•
Pay an Authorized Service Center for the new, or at our option, refurbished replacement parts and picture tube required to repair your unit.  
How you get service:  
•
•
•
Call 1-866-SCENIUM and have your unit’s date of purchase and model number ready.  
A representative will troubleshoot your problem over the phone.  
If the representative determines that you should receive service, they will provide you with the name(s) of the Authorized Service Center in your  
area.  
•
•
Contact the Service Center and arrange for home or pick up, repair, and return service, provided that your unit is located within the geographic  
territory covered by an Authorized Service Center. If not, you must take your unit to the Service Center location at your own expense, or pay for  
the cost the Service Center may charge to transport your unit to and from your home.  
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the warranty period must be  
presented to obtain warranty service. For rental firms, proof of first rental is also required.  
What your warranty does not cover:  
•
Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be  
obtained from your dealer.)  
•
•
•
•
•
•
•
•
Installation and related adjustments.  
Signal reception problems not caused by your unit.  
Damage from misuse or neglect.  
Batteries.  
Damage from images burnt onto the screen.  
A unit that has been modified or incorporated into other products.  
A unit purchased or serviced outside the U.S.A.  
Acts of nature, such as but not limited to lightning damage.  
Product registration:  
•
Please complete and mail the Product Registration Card packed with your unit. It will make it easier to contact you should it ever be necessary.  
The return of the card is not required for warranty coverage.  
Limitation of Warranty:  
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED  
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO  
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN  
ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.  
•
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. THOMSON MULTIMEDIA  
INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT  
OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY  
ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY  
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET  
FORTH ABOVE.  
How State Law relates to this warranty:  
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty  
lasts, so the above limitations or exclusions may not apply to you.  
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.  
If you purchased your television outside the United States:  
This warranty does not apply. Contact your dealer for warranty information.  
•
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole  
responsibility of the purchaser.  
44  
Chapter 8  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other Information  
Accessory Order Form  
Remote Control This is the  
remote control that came  
packed with your TV.  
Replacements or spares can  
be ordered as needed.  
Qty Total  
Description  
Part No. Price  
Screw-on antenna cable (3-ft)  
VH81  
$3.95  
Screw-on antenna cable (6-ft)  
Push-on antenna cable (6-ft)  
Monaural VCR Dubbing Cable (6-ft)  
Stereo VCR Dubbing Cable (6-ft)  
S-Video Cable (6-ft)  
VH82  
$4.95  
$5.95  
$5.95  
$9.95  
$7.95  
$14.95  
$3.95  
$49.95  
$33.15  
$4.45  
R
VH89  
VH83  
VH84  
VH976  
VH913  
VH47  
RCR160TALM1  
S-Video Cable (12-ft)  
2-way Signal Splitter helps  
you connect to a second TV or  
VCR.  
2-way Signal Splitter  
Amplified Antenna  
ANT200  
257003  
228449  
Splitter  
VH47  
Remote Control (RCR160TALM1)  
Audio•Video Adapter  
Amplified VHF/UHF/FM Antenna  
allows you to easily switch from  
the antenna signal to cable or  
satellite easily without  
Surge Protector  
SCTV160 $49.95  
Component Video Cables (6-ft)  
Component Video Cables (12-ft)  
Optical Cable (3-ft)  
DT6DC  
DT12DC  
DV3  
$24.95  
$34.95  
$15.95  
$19.95  
disconnecting antenna.  
Optical Cable (6-ft)  
DV6  
ANT200  
Component Video Cables Triple cable used  
to connect a video source with Y, PR, PB  
jacks to the TV.  
Surge Protector provides eight  
outlets, coaxial and telephoneline  
protection. Audible alarm for surge  
failure.  
r e s e t  
o f f  
SCTV 160  
Screw-on Cable attaches to the  
round antenna connectors (called  
75-ohm F-type) on the back of  
your VCR or TV. The ends screw  
onto the connectors for a secure  
connection.  
Gold-Tipped cable  
DT6DC (6-ft)  
VH81 (3-ft)  
VH82 (6-ft)  
DT12DC (12-ft)  
Standard Audio/Video cable with  
RCA-type phono plugs.  
HOW TO ORDER  
VH83  
BY PHONE: To place your order by phone, have your Visa, MasterCard or  
Discover Card ready and call  
1-800-338-0376  
S-Video Cable has multi-pin  
connectors on each end for  
connecting S-Video components to  
your TV.  
Use this number only to place an order for accessory items listed on this  
order form.  
VH913  
BY MAIL: mail money order or check in US currency (made payable to  
Thomson multimedia Inc.) to the following address:  
Video Accessories  
PO Box 8419  
Ronks, PA 17573  
Optical cable Helps you connect  
to a component with an Optical  
Digital Audio In jack, such as a  
Dolby Digital decoder or receiver.  
Optical cable  
DV3 (3-ft), DV6 (6-ft)  
Chapter 8  
45  
Graphics contained within this publication are for representation only.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Visit the RCA Scenium website at www.rcascenium.com  
Please do not send any products to the Indianapolis address listed in this manual or on the carton. This will only  
add delays in service for your product.  
Thomson multimedia Inc.  
10330 North Meridian Street  
Indianapolis, IN 46290  
©2002 Thomson multimedia Inc.  
Trademark(s)® Registered  
Marca(s) Registrada(s)  
Printed in USA  
TOCOM 15891740  
Download from Www.Somanuals.com. All Manuals Search And Download.  

RCA Flat Panel Television D40W15B User Guide
Rheem Water Heater Universal Gas User Guide
Rhino Mounts Lawn Mower SE8A User Guide
Rinnai Gas Heater RCE 229A User Guide
Roland Marine Safety Devices FR 3s 3 User Guide
Saeco Coffee Makers Espresso Maker 15001566 User Guide
Sakar Digital Camera 16380 User Guide
Samsung Home Theater System HT C5550 User Guide
Samsung Projector SP L305 User Guide
Schumacher Welding System PID 750 User Guide