RCA Clock Radio RP5605R User Guide

v6.0 (1.0.6.0) (EN/F)  
IMPORTANT SAFETY INSTRUCTIONS  
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE  
Important battery  
precautions  
Any battery may present a risk of  
fire, explosion, or chemical burn  
if abused. Do not try to charge  
a battery that is not intended to  
be recharged, do not incinerate,  
and do not puncture.  
Do not defeat the safety purpose  
of the polarized or grounding-  
type plug. A polarized plug  
has two blades with one wider  
than the other. A grounding  
type plug has two blades and  
a third grounding prong. The  
wide blade or the third prong is  
provided for your safety. If the  
provided plug does not fit into  
your outlet, consult an electrician  
for replacement of the obsolete  
outlet.  
Protect the power cord from  
being walked on or pinched  
particularly at plugs, convenience  
receptacles, and the point where  
they exit from the apparatus.  
Only use attachments/accessories  
specified by the manufacturer.  
Use only  
lightning storms or when unused  
for long periods of time.  
product.  
This equipment is a Class  
II or double insulated  
electrical appliance. It  
has been designed in  
such a way that it does  
not require a safety  
connection to electrical  
earth.  
user manual  
guide de l’utilisateur  
Care should be taken so that  
objects do not fall into the  
product.  
Do not attempt to disassemble  
the cabinet. This product does  
not contain customer serviceable  
components.  
The marking information  
is located at the bottom of  
apparatus.  
To be completely disconnect the  
power input, the main plug of  
apparatus shall be disconnected  
from the mains.  
Main plug is a disconnect device.  
The main plug should not be  
obstructed OR should be easily  
accessed during intended use.  
The ventilation should not  
be impeded by covering the  
ventilation openings with items  
such as newspaper, table-cloths,  
curtains etc.  
No naked flame sources such as  
lighted candled should be placed  
on the apparatus.  
Attention should be drawn to  
the environmental aspects of  
battery disposal.  
Refer all servicing to qualified  
service personnel. Servicing is  
required when the apparatus  
has been damaged in any way,  
such as power-supply cord or  
plug is damaged, liquid has been  
spilled or objects have fallen into  
the apparatus, the apparatus  
has been exposed to rain or  
moisture, does not operate  
RP5605  
RP5605R  
Non-rechargeable batteries,  
such as alkaline batteries, may  
leak if left in your product for  
a long period of time. Remove  
the batteries from the product if  
you are not going to use it for a  
month or more.  
Plugging in for power  
AC OUTLET POWER SUPPLY:  
120 V~60 Hz  
Some of the following information  
may not apply to your particular  
product; however, as with any  
electronic product, precautions  
should be observed during handling  
and use.  
normally, or has been dropped.  
The AC power plug  
is polarized (one  
blade is wider than  
the other) and only  
fits into AC power  
outlets one way.  
If the plug will  
ADDITIONAL SAFETY  
INFORMATION  
If your product uses more than  
one battery, do not mix types  
and make sure they are inserted  
correctly. Mixing types or  
inserting incorrectly may cause  
them to leak.  
Apparatus shall not be exposed  
to dripping or splashing and no  
objects filled with liquids, such  
as vases, shall be placed on the  
apparatus.  
Read these instructions.  
Keep these instructions.  
Heed all warnings.  
Follow all instructions.  
Do not use this apparatus near  
water.  
not go into the outlet completely,  
turn the plug over and try to insert  
it the other way. If it still does not  
fit, contact a qualified electrician to  
change the outlet, or use a different  
one. Do not attempt to bypass this  
safety feature.  
]
with the  
cart, stand,  
tripod,  
bracket,  
or table  
Always leave sufficient space  
around the product for  
Discard any leaky or deformed  
battery immediately. They  
may cause skin burns or other  
personal injury.  
Please help to protect the  
environment by recycling or  
disposing of batteries according  
to federal, state, and local  
regulations.  
ventilation. Do not place  
product in or on a bed, rug, in  
a bookcase or cabinet that may  
prevent air flow through vent  
openings.  
Do not place lighted candles,  
cigarettes, cigars, etc. on the  
product.  
Clean only with dry cloth.  
Do not block any ventilation  
openings. Install in accordance  
with the manufacturer’s  
instructions.  
Portable Cart Warning  
specified by  
the manufacturer, or sold with  
the apparatus. When a cart is  
used, use caution when moving  
the cart/apparatus combination  
to avoid injury from tip-over.  
Unplug this apparatus during  
Do not install near any heat  
sources such as radiators, heat  
registers, stoves, or other  
apparatus (including amplifiers)  
that produce heat.  
EN/F  
The use of apparatus in  
moderate climates.  
It is important to read this user manual prior to using your new product for the first time.  
Nous vous recommandons de lire ce manuel d’instructions avant d’utiliser votre nouveau  
produit pour la première fois.  
Connect power cord only to AC  
power source as marked on the  
Before you begin  
FCC Information  
For your records  
In the event that service should be  
required, you may need the model  
number and the serial number. In  
the space below, record the date  
and place of purchase and the serial  
number:  
Battery back-up operation  
The power failure protection circuit  
will not operate unless battery is  
installed.  
Install battery as follow:  
WARNING: The battery (battery or  
batteries or battery pack) shall not  
be exposed to excessive heat such as  
sunshine, fire or the like.  
Note: This equipment has been  
tested and found to comply with  
the limits for a Class B digital device,  
pursuant to Part 15 of FCC Rules.  
These limits are designed to provide  
reasonable protection against  
harmful interference in a residential  
installation. This equipment  
generates, uses, and can radiate  
radio frequency energy and, if not  
installed and used in accordance  
with the instructions, may cause  
harmful interference to radio  
communications.  
Power failure indicator  
When AC power is interrupted  
(disconnected) for a short period of  
time, both time and alarm settings  
will change (unless battery is  
installed). After AC power is restored  
(reconnected), the Digital Display  
will blink to indicate that power was  
interrupted and you should readjust  
the time and alarm settings.  
Consult the dealer or an  
experienced radio/TV technician  
for help.  
Alkaline (NEDA 1604A/  
IEC 6LR61) battery is  
recommended. Carbon-  
1. Remove battery compartment  
door (located at the bottom of  
the radio) by applying thumb  
pressure to the tab on battery  
door and then lift the door out  
and off the cabinet.  
2. Connect a 9-volt battery (not  
supplied) to the connector plug.  
3. Replace the compartment door.  
zinc battery may be used but  
memory holding time will be  
substantially reduced. Memory  
holding time for a fresh alkaline  
battery is approximately 8  
hours (if radio or alarm are not  
operated) which should take  
care of short, nuisance-type  
AC power failures. To preserve  
battery life, the unit should  
remain plugged into an AC  
outlet. As the battery gets older,  
its voltage drops and memory  
may be lost. Be sure to replace  
the battery periodically. Battery  
should be removed if the unit  
will be stored for more than one  
month. Leaky battery can badly  
damage the clock radio.  
Changes or modifications not  
expressly approved by Audiovox  
could void the user’s authority to  
operate the equipment.  
No worry battery backup  
When the battery backup functions,  
the digital display will not light,  
however, the wake function still  
occurs during the power interruption  
if remaining battery power is  
adequate.  
Ecology  
Help protect the environment - we  
recommend that you dispose of  
used batteries by putting them into  
specially designed receptacles.  
Model No.:  
Date of Purchase:  
Place of Purchase:  
Serial No.:  
Service information  
Normal operation will resume after  
AC power is restored so you will not  
have to reset the time or wake.  
This product should be serviced  
only by those specially trained in  
appropriate servicing techniques.  
For instructions on how to obtain  
service, refer to the warranty  
included in this user manual.  
However, there is no guarantee  
that interference will not occur  
in a particular installation. If this  
equipment does cause harmful  
interference to radio or television  
reception, which can be determined  
by turning the equipment off and  
on, the user is encouraged to try to  
correct the interference by one or  
more of the following measures:  
Technical information  
Product: CD/Clock Radio  
Brand: RCA  
Model: RP5605, RP5605R  
Power Supply: 120V ~ 60Hz  
Power Consumption: 13 Watts  
Reorient or relocate the receiving  
antenna.  
Increase the separation between  
the equipment and receiver.  
Connect the equipment into an  
outlet on a circuit different from  
that to which the receiver is  
connected.  
Clock  
Radio  
General controls  
– stops CD playback  
3. When finished, wait for about 5  
seconds or press CLOCK SET to  
exit clock setting mode.  
FM Antenna – The power cord acts  
as your FM antenna. The power  
cord picks up moderate to strong  
stations and eliminates the need for  
an external antenna in most strong  
signal areas. Be sure the power cord  
is stretched out to its full length. Do  
not coil or bunch the cord together.  
Changing position of the power cord  
may improve reception.  
Switching on  
Press RADIO ON to turn on the  
radio.  
Top view  
Right view  
TUNING – selects radio frequency  
Setting clock  
1. Press CLOCK SET once. The  
current clock time flashes on the  
display.  
– turns on the unit from CD mode;  
pauses or resumes CD playback  
BAND AM/FM – selects radio band  
Switching band  
Slide the BAND/AM•FM switch on  
the right of the unit to select AM or  
FM band.  
SLEEP – activates the Sleep function  
CLOCK SET – activates clock time  
setting mode  
WAKE TIME – activates wake time  
setting mode; checks current wake  
time  
2. Press  
or  
to set the clock  
Built-In AFC – The Built In  
time. The time decrements or  
increments will follow by a faster  
rate when you press and hold  
the buttons. AM or PM indicator  
also lights beside the time on the  
display.  
Automatic Frequency Control (AFC)  
works only on FM. It helps reducing  
drift on FM reception and keeping  
the radio locked in on the FM station  
to which it is tuned.  
Left view  
+ VOLUME – – adjusts volume  
Tuning radio  
WAKE MODE – activates wake  
function and changes wake mode  
Rotate the TUNING dial on the right  
of the unit to select radio frequency.  
SNOOZE – turns off the wake  
function temporarily; cancels the  
sleep function  
When tuning in FM stations, you  
may notice that the station you are  
tuning can be well-tuned on two  
or three nearby points on the dial.  
Always tune carefully at the loudest  
and clearest point.  
RADIO ON – turns on the radio;  
Antennas  
selects the radio from other modes  
AM Antenna – A built-in ferrite  
rod antenna eliminates the need  
for an outside antenna for AM  
reception. Rotating the unit slightly  
may improve reception of distant  
AM stations.  
OFF – turns off the unit; turns off the  
wake function and sleep mode  
/
– sets clock or wake time;  
skips to previous or next CD track  
during CD playback  
CD player  
Wake function  
Sleep function  
Listening to CD  
1. Lift open the CD compartment  
door.  
Selecting wake source  
1. If your desired wake source is  
radio or CD:  
Setting wake time  
1. Press WAKE TIME once. The  
current wake time flashes on the  
display.  
Turning off the wake  
function  
Silence the wake function  
momentarily:  
Stop the wake function:  
Press OFF. The wake function will  
activate again on the following day  
at the same time.  
You can set the duration (up to 90  
min) before the radio or CD player  
turns off automatically.  
If disc is paused for  
more than 5 minutes,  
the CD player will  
resume to stop mode  
automatically.  
If disc is stopped in the CD  
mode for more than 30  
minutes without further  
operations, the unit will turn  
off automatically.  
If you set Sleep function  
with low volume level  
before going to bed, we  
advise using Wake to Alarm mode.  
Wake to Radio – select an AM or  
FM station (refer to “Radio”).  
Wake to CD – insert a CD in the  
CD compartment.  
1. Press SLEEP repeatedly to select  
a duration (90, 80, 70, 60, 50,  
40, 30, 20, 10min or OFF) before  
the radio or CD player turns off  
automatically.  
With SmartSnooze™, press  
SNOOZE, or  
turn off the wake function  
,
,
to  
2. Set a wake time (refer to  
“Setting wake time”).  
temporarily for extra sleep time.  
3. Press WAKE MODE repeatedly  
to select a wake source. The  
indicator lights against the wake  
source icons on the right of the  
display to indicate the currently  
selected wake source:  
The default sleep time is 60  
minutes.  
Cancel the wake function  
completely:  
2. Press  
or  
to set the wake  
time. The time decrements or  
increments will follow by a faster  
rate when you press and hold  
the buttons. AM or PM indicator  
also lights beside the time on the  
display.  
3. When finished, wait for about 5  
seconds or press WAKE TIME to  
exit wake time setting mode.  
By default, the radio will be  
switched on once SLEEP is  
pressed. You may change to  
listen to the CD player by  
Press WAKE MODE repeatedly until  
no indicator lights against the wake  
source icons. The set wake time will  
not be erased and can be used the  
next time when you switch on wake  
function again.  
2. Insert a disc and close the door.  
3. Press  
start CD playback.  
Press to pause playback and  
press again to resume.  
to select CD mode and  
pressing  
if a disc is loaded.  
The wake function will activate  
again when the snooze period (9  
minutes) is over.  
The snooze period is fixed and  
cannot be changed.  
2. To check the remaining duration  
before the unit turns off, press  
SLEEP once.  
3. To cancel the sleep function,  
press SNOOZE or OFF.  
wake by alarm  
wake by radio  
wake by CD  
4. Adjust volume to your desired  
level.  
The Wake to Alarm mode (read  
below) will be automatically  
activated whenever the wake  
time has been set.  
5. Press  
or  
to skip backward  
Once the wake source is selected,  
the wake function will be  
or forward a track. Press and  
hold to search through a track.  
6. Press to stop playback.  
activated at the set wake time.  
7. Press RADIO ON to listen to the  
radio or OFF to turn off the unit.  
Checking wake time  
Press WAKE TIME to show the  
current wake time which flashes  
briefly on the display.  
Warranty information  
Illustrations contained within this  
publication are for representation  
only and subject to change.  
also have other rights which vary  
from state to state.  
be responsible to restore any  
personal preference settings.  
Properly pack your unit. Include  
any remotes, memory cards,  
cables, etc. which were originally  
provided with the product.  
However DO NOT return any  
removable batteries, even if  
batteries were included with  
the original purchase. We  
recommend using the original  
carton and packing materials.  
Include evidence of purchase  
date such as the bill of sale. Also  
print your name and address and  
a description of the defect. Send  
via standard UPS or its equivalent  
to:  
Warranty information  
12 Month Limited Warranty  
Applies to RCA Audio/Video  
Products  
or liabilities. ANY IMPLIED  
WARRANTIES, INCLUDING  
ANY IMPLIED WARRANTY  
A new or refurbished unit will be  
shipped to you freight prepaid.  
incurred for installation, removal  
or reinstallation of product, to  
corruptions caused by computer  
viruses, spyware or other  
malware, to loss of media, files,  
data or content, or to damage to  
tapes, discs, removable memory  
devices or cards, speakers,  
accessories, computers, computer  
peripherals, other media players,  
home networks or vehicle  
The descriptions and characteristics  
given in this document are given as  
a general indication and not as a  
guarantee. In order to provide the  
highest quality product possible,  
we reserve the right to make any  
improvement or modification  
without prior notice.  
How to make a warranty claim:  
OF MERCHANTABILITY,  
What we will do:  
If your product is capable of  
storing content (such as an mp3  
player, digital voice recorder,  
etc), it is recommended to  
make periodic backup copies of  
content stored on the product.  
If applicable, before shipping a  
product, make a back up copy  
of content or data stored on  
the device. Also, it is advisable  
to remove any personal  
content which you would not  
want exposed to others. IT IS  
LIKELY THAT CONTENTS AND  
DATA ON THE DEVICE WILL BE  
LOST DURING SERVICE AND  
REFORMATTING. AUDIOVOX  
ACCEPTS NO LIABILITY FOR LOST  
CONTENT OR DATA, OR FOR THE  
SECURITY OF ANY PERSONAL  
CONTENT OR DATA ON THE  
RETURNED DEVICE. Product will  
be returned with factory default  
settings, and without any pre-  
loaded content which may have  
been installed in the originally  
purchased products. Consumer  
will be responsible for reloading  
data and content. Consumer will  
SHALL BE LIMITED TO THE  
DURATION OF THIS WRITTEN  
WARRANTY. ANY ACTION FOR  
BREACH OF ANY WARRANTY  
HEREUNDER INCLUDING ANY  
IMPLIED WARRANTY OF  
MERCHANTABILITY MUST BE  
BROUGHT WITHIN A PERIOD  
OF 24 MONTHS FROM DATE  
OF ORIGINAL PURCHASE.  
Provide you with a new, or at our  
option, a refurbished unit. The  
exchange unit is under warranty  
for the remainder of the original  
product’s warranty period.  
AUDIOVOX ELECTRONICS CORP.  
(the Company) warrants to the  
original retail purchaser of this  
product that should this product  
or any part thereof, under  
normal use and conditions, be  
proven defective in material or  
workmanship within 12 months  
from the date of original  
For Canada Customers, please  
ship to:  
electrical systems.  
This Warranty does not  
apply to any product or  
Audiovox Return Centre  
c/o Genco  
6685 Kennedy Road,  
Unit#3, Door 16,  
Mississuaga, Ontario  
L5T 3A5  
purchase, such defect(s) will  
be repaired or replaced with  
reconditioned product (at the  
Company’s option) without  
charge for parts and repair labor.  
To obtain repair or replacement  
within the terms of this  
IN NO CASE SHALL THE  
part thereof which, in the  
opinion of the Company, has  
suffered or been damaged  
through alteration, improper  
installation, mishandling,  
misuse, neglect, accident, or by  
removal or defacement of the  
factory serial number/bar code  
label(s). THE EXTENT OF THE  
COMPANY’S LIABILITY UNDER  
THIS WARRANTY IS LIMITED TO  
THE REPAIR OR REPLACEMENT  
PROVIDED ABOVE AND, IN NO  
EVENT, SHALL THE COMPANY’S  
LIABILITY EXCEED THE PURCHASE  
PRICE PAID BY PURCHASER FOR  
THE PRODUCT.  
COMPANY BE LIABLE FOR ANY  
CONSEQUENTIAL OR INCIDENTAL  
DAMAGES FOR BREACH OF THIS  
OR ANY OTHER WARRANTY.  
No person or representative is  
authorized to assume for the  
Company any liability other than  
expressed herein in connection  
with the sale of this product.  
Some states do not allow  
limitations on how long an  
implied warranty lasts or the  
exclusion or limitation of  
incidental or consequential  
damage so the above limitations  
or exclusions may not apply to  
you. This Warranty gives you  
specific legal rights and you may  
Audiovox Electronics Corp.  
Attn: Service Department.  
150 Marcus Blvd.  
Hauppauge N.Y. 11788  
1-877-833-3491  
Visit http://store.audiovox.com to find the best  
Warranty, the product is to be  
delivered with proof of warranty  
coverage (e.g. dated bill of  
sale), specification of defect(s),  
transportation prepaid, to the  
Company at the address shown  
below.  
accessories for your products.  
Insure your shipment for loss or  
damage. Audiovox accepts no  
liability in case of damage or loss  
en route to Audiovox.  
Pay any charges billed to you by  
the Exchange Center for service  
not covered by the warranty.  
This Warranty does not extend  
to the elimination of externally  
generated static or noise, to  
correction of antenna problems,  
loss/interruptions of broadcast  
or internet service, to costs  
© 2010 Audiovox Accessories Corporation  
111 Congressional Blvd., Suite 350  
Carmel, IN 46032  
This Warranty is in lieu of  
all other express warranties  
Trademark(s) ® Registered  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Car Speaker HF 75 User Guide
Radio Shack Car Video System PLVWR7200F User Guide
RCA DVD Player NS D7PDVD User Guide
Ricoh Digital Camera FV L500B1 User Guide
Rimage DVD Recorder 6100 User Guide
Ruby Tech Switch GS 1108C User Guide
Russound Stereo Amplifier R850MC User Guide
Samsung Computer Monitor 20080828210016437 User Guide
Samsung Microwave Oven M1716 User Guide
Sangean Electronics MP3 Player ATS909 User Guide