RCA Camcorder ProV600 User Guide

camcorder

user's guide

ProV600

Download from Www.Somanuals.com. All Manuals Search And Download.

Assistance

We want to make sure you enjoy your new camcorder. If you have any

questions, call:

Camcorder Exchange Warranty...........800-283-6503 (pages 54-55)

Customer Service..........................................800-336-1900 (page 53)

Accessories............................................. 800-338-0376 (pages 42-47)

Table of Contents

Safety Information.............................. i

First Time Operation

Powering Your Camcorder

• Using the Adapter/Charger to

Power Your Camcorder ............ 11

• Using the Battery to Power

Your Camcorder

• Assistance ....................................... 3

• Unpack the Camcorder and

Accessories ................................. 3

• Attach Lens Cap Cord and

• Attach and Remove the

Battery ................................. 12

• Charge and Refresh the

Adjust Handstrap ........................ 4

• Attach the Shoulder Strap ............... 4

• Attach the Adapter/Charger ............ 5

• Turn on the Camcorder ................... 6

• Insert a Cassette .............................. 6

• Use the LCD Monitor or

Battery ................................. 13

• Battery Level Indicator ............. 14

• Battery Care and Storage .......... 14

Remote Control

• Install Lithium Cell ....................... 15

• Buttons .....................................16-17

• Sensor............................................ 17

Viewfinder to View What

You Are Recording ..................... 7

• Start and Stop Recording ................ 8

• Play Back What you Have

Video Cassettes

Recorded .................................... 8

• Turn Off the Camcorder .................. 8

• Close the Monitor and

• Erase Protection – Safety Tab ....... 18

• Recording Times ........................... 18

• Insert or Remove a Cassette .......... 19

• Cassette Care and Storage............. 19

Replace the Lens Cap................. 8

• Review Camcorder’s

Operating Controls ................9-10

Download from Www.Somanuals.com. All Manuals Search And Download.

Table of Contents

Recording

Playback

• Making a Recording .................20-21

• Viewing What You are Recording

Using the Viewfinder or

• Using the LCD Monitor

or Viewfinder ........................... 36

• Playback Features

LCD Monitor

• Visual Searching ....................... 37

• Stop-Action Pause .................... 37

• Tape Positioning ....................... 37

• Playback on TV (or VCR) with

AUDIO/VIDEO IN Jacks.....38-39

• Playback on a TV without

• Using the Viewfinder ................ 22

• Eyepiece Focus Control............ 22

• Using the LCD Monitor............ 23

• LCD Monitor and Viewfinder

Displays...............................24-25

• Flying Erase Head ......................... 26

• Quick Review Feature................... 26

• Camera Edit Feature ..................... 26

• DISPLAY Button ........................... 26

• Microphone ................................... 27

• Automatic White Balance

Audio/Video Inputs .............40-41

Optional Accessories...................42-47

• Accessory Order Form .............45-47

Care and Maintenance

• Cleaning the Camcorder ............... 48

• Cleaning the Camcorder’s

Lens ...................................... 48

• Cleaning the Camcorder’s

LCD Monitor ....................... 48

and Iris ..................................... 27

• AE (Automatic Exposure)

Shutter Speed Control .............. 27

• Beep Feature ................................. 27

• Blank Search ................................. 28

• Tape-Remaining Display............... 28

• Zooming ........................................ 29

• Focusing ........................................ 30

• Using Focus Lock Feature ........ 30

• Date/Time Display

• Cleaning the Camcorder’s

Viewfinder ............................ 48

• Proper Care and Storage ............... 49

• Things to Avoid ............................. 49

Trouble Checks ...........................50-52

Customer Assistance ........................ 53

Limited Warranty .......................54-55

Specifications.................................... 56

Information to User ......................... 56

Index ............................................57-60

• Install and Remove

Clock Lithium Cell.............. 31

• Set the Time and Date............... 32

• Record Date or Date and Time ... 33

• Time Counter ................................ 34

Recording Tips ................................. 35

Traveling Tips .................................. 35

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

This section describes only the basic steps necessary to set up your camcorder to

record. Refer to the other sections for detailed operation and feature options.

Assistance

The toll-free numbers are available to help you with any problem you may encounter.

Camcorder Exchange Warranty......................800-283-6503

Customer Service........................................... 800-336-1900

Accessories.................................................... 800-338-0376

1. Unpack the camcorder and accessories.

• Save the packing materials and box in case you ever need to ship

or store your camcorder.

• The items shown below are packed with your camcorder. If any

are missing or appear damaged, contact your dealer immediately.

ZOOM

WARNING:

DISPLAY

REC

NICKEL CAD-

MIUM BATTERY

MUST BE

COUNTER

MEMORY RESET

STOP

REW

PLAY

F.FWD

PAUSE

RECYCLED OR

DISPOSED OF

PROPERLY.

Rechargeable Battery

Part No AV55

Remote Control

Part No. 233195

Model ProV600

Caution: Do

not use this

adapter/

Shoulder Strap

Part No. 213004

charger for

any purpose

other than

charging the

AV55 battery

pack or

Lens Cap String

Part No. 224176

supplying

power to the

camcorder.

AC Adapter/Charger Part No. 238152

and DC Cable

Part No. DCC100

Audio/Video Cable

Part No. 217496

CAUTIONS: Lithium cells must be disposed of properly. Never handle

punctured or leaking cells. May cause burns or personal injury.

Clock and Remote Cells

3-Volt Micro Lithium

Cells--such as CR2025--

available from most local

drug stores and camera

shops. Use of other cells

present a risk of fire or

explosion.

Keep out of the hands of children. Can cause death or injury if swallowed.

If swallowed, consult a physician immediately for emergency treatment.

The lithium cells used in this device may explode resulting in a fire or

chemical burn if mistreated. Do not recharge, disassemble, heat above

212°F (100°C), or incinerate.

Never use metallic tweezers to hold the cells, and never short circuit the +

and – sides of the cell.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

2. Attach lens cap cord and

adjust handstrap.

3. Attach the shoulder strap.

• Unfasten one end of the shoulder

strap from the buckle. Make sure

you leave the buckle on the strap.

• Press in on the tabs on both sides

of the lens cap to remove it.

Shoulder Strap Rings

• Attach the lens cap cord to the

lens cap.

• Thread one end of the shoulder

strap through one of the shoulder

strap rings.

• Pull up the flap of the handstrap

and open the strap.

• Thread the strap back into the

buckle as shown. Pull on the

strap and make sure it is fastened

securely before using it to support

your camcorder.

• Run the cord from the lens cap

through the audio/video terminal

cover and over the end of

the strap.

Cautions: Make sure the

shoulder strap is firmly

attached before using it to

carry the camcorder.

• Adjust the strap for comfort and

close the flap.

When carrying the camcorder

with the shoulder strap, close

the monitor and place the

viewfinder down. This helps

prevent possible damage to the

monitor or viewfinder from

bumping against your body as

you move.

Note: Make sure the end of the strap

is positioned securely before closing

the flap.

• Slide the lens cap onto the strap.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

DC IN Jack

OPEN

Button

To AC

100-240V,

50/60 Hz

DC OUT

Jack

DC Cable

Adapter/

Charger

POWER

Indicator

4. Attach the adapter/charger.

Since the battery must be charged

before it can be used the first time,

attach the adapter/charger to the

camcorder.

• Connect the other end of the DC

cable to the DC IN jack on the

camcorder and run the cable

through the cutout as shown.

• Connect one end of the DC cable

to the DC OUT jack on the

adapter/charger.

• Plug the adapter/charger’s plug

into an operating outlet. The

adapter/charger’s POWER

indicator will light.

• Press the OPEN button and open

the monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

Tape Window

Beep

Indicator

VCR/CAM

Button

VCR

CAM

VCR

(Green)

Indicator

CAM

(Red)

PUSH Here to

Compartment

Indicator

EJECT

Button

POWER

Switch

5. Turn on the camcorder.

6. Insert a cassette.

• Slide the POWER switch upward

• Press the EJECT button to open

to turn on the camcorder.

the cassette compartment.

• The camcorder turns on in the

CAM (camera) mode. The red

CAM indicator beside the VCR/

CAM button lights. If it does not,

press the VCR/CAM button.

• Insert the cassette so the safety tab

is at the top and the tape window

faces out.

• Gently close the cassette

compartment by pressing on the

area labeled PUSH until it clicks

into place. The top closes

automatically.

Notes: The CAM (red) or VCR

(green) indicator lights to tell you

what mode the camcorder is in.

A beep sounds for certain operations.

The beep indicator flashes with the

beep. Details are on page 27.

Caution: Do not press

down on the top as it may

damage the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

7. Use the LCD monitor or viewfinder to view what you are

recording.

You can watch what you are recording on the color LCD monitor or in the black-

and-white viewfinder.

Viewfinder

Eyepiece Focus

Control

BRIGHT

Control

LCD

Monitor

Use the LCD Monitor

Use the viewfinder.

• Rotate the monitor into a

comfortable viewing position. The

monitor can be rotated completely

around.

• The monitor must be closed or

rotated 130º-180º for the

viewfinder to operate.

• Rotate the viewfinder into a

comfortable operating position.

Note: When the monitor is opened,

the viewfinder is normally turned off.

However, if the monitor is rotated 130º-

180º, the viewfinder will remain on so

the subject and the camcorder operator

can both see what is being recorded.

• Turn the eyepiece focus control to

adjust the focus of the viewfinder

for your vision.

• Adjust the brightness of the image

in the monitor by rotating the

BRIGHT control.

Note: When recording on a bright

sunny day, the LCD monitor may be

hard to see. Use the viewfinder.

(continued on next page)

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

VCR

CAM

VCR (Green)

Indicator

POWER

Switch

REC

START/

STOP

Button

DISPLAY BLANK

REW

PLAY F.FWD

STOP PAUSE

REW

Button

PLAY

Button

EJECT

STOP

Button

• Press REW to rewind the tape.

8. Start and stop recording.

• Press PLAY to play back the tape

on the LCD monitor or in the

viewfinder.

• Press and release the REC START/

STOP button (thumb trigger) to

start recording. REC appears on

the LCD monitor or in the

viewfinder.

• Press STOP when you are finished

playing back the tape.

• Press and release the REC START/

STOP button (thumb trigger) again

to stop recording. PAUSE flashes

on the LCD monitor or in the

viewfinder.

• Details on LCD monitor and

viewfinder playback are on

page 36.

10. Turn off the camcorder.

Slide the POWER switch upward.

The VCR (or CAM) indicator will

turn off.

9. Play back what you have

recorded.

• Press the VCR/CAM button to light

the green VCR indicator.

11. Close the monitor and

replace the lens cap.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

11. Review camcorder’s operating controls.

Eyepiece

Focus

Control

Zoom Control

W = Wide Angle

T = Telephoto

Lens

A (Audio),

V (Video),

and RF

Out Jacks

Remote

Control

Sensor

LCD Monitor and

Microphone

Battery Compartment

Clock Cell

Compartment

Shoulder Strap Holder

Cassette

Compartment

VCR (Green)

Indicator

CAM (Red)

Indicator

VCR

CAM

VCR/CAM

Button

Beep

Indicator

REC/START STOP Button

(Thumb Trigger)

Handstrap

POWER

Switch

Shoulder Strap Holder

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

11. Review camcorder’s operating controls.

B (Bright) and F

(Focus) Controls

(See “Trouble

Checks” for

BATT (Battery

Release) Button

details.)

Speaker

Battery

Compartment

VOLUME

Control

BRIGHT

Control

LCD

Monitor

DATE Button

OPEN

Button

BLANK

Button

DISPLAY BLANK

FOCUS LOCK Button

DISPLAY Button

F.FWD (Fast

Forward)

Button

REW

PLAY F.FWD

DC IN Jack

REW (Rewind) Button

STOP PAUSE

EJECT

PAUSE

Button

PLAY Button

EJECT Button

STOP Button

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

Using the Adapter/Charger to Power Your Camcorder

The adapter/charger attaches to the camcorder and lets you power your camcorder

directly from standard household power. The adapter/charger operates on 100-240

volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the

camcorder or recharge the battery.

OPEN

Button

To AC

100-240,

50/60 Hz

DC IN Jack

DC OUT

Jack

Adapter/

Charger

DC Cable

POWER

Indicator

Attach Adapter/Charger

Remove Adapter/Charger

1. Connect one end of the DC cable to

the DC OUT jack on the adapter/

charger.

1. Unplug the adapter/charger from the

wall outlet.

2. Remove the DC cable from the

adapter/charger and camcorder.

2. Press the OPEN button and open the

LCD monitor.

3. Close the LCD monitor and press on it

gently until it locks into place.

3. Connect the other end of the DC cable

to the DC IN jack on the camcorder

and run the cable through the cutout

as shown.

Using an Optional Plug Adapter

An optional plug adapter may be required

in some countries.

4. If the adapter/charger is properly

connected, its POWER indicator

will light.

Optional AC

AC 100-240V

Plug Adapter

Caution: Do not use this adapter/

charger for any other purpose other

than charging the AV55 battery

pack or supplying power to

the camcorder.

1. Plug the adapter/charger’s plug into

the AC plug adapter.

2. Plug the AC plug adapter into the AC

outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

Using the Battery to Power Your Camcorder

The battery must be charged as described on the next page before it can be used the

first time. Initial charging will take approximately 60 minutes. When fully charged,

the battery should supply about 50 minutes of operating time (depending on how much

you use zoom and pause). Conserve battery power by turning the camcorder off during

recording breaks.

Note: The small marker switch on top of the battery is for use as a personal reminder to help you

recharge the battery. It has no other function.

BATT (Battery

Release) Button

Battery Safety Precau-

tions

Do not short the battery’s

terminals.

Do not attempt to disas-

semble or modify the

battery. There are no user-

serviceable parts inside.

Use the battery only with

specified adapter/chargers

and camcorders.

Throwing the battery into a

fire or exposing it to

Marker

excessive heat – over 149ºF

Rechargeable

Switch

(65ºC) could be hazardous.

Battery (Press

here.)

OPEN Button

Attach the Charged Battery

Remove the Battery

Remove the DC cable if attached.

1. Press the OPEN button to open the

LCD monitor. Carefully open the

monitor fully.

1. Press the OPEN button to open the

LCD monitor. Carefully open the

monitor fully.

2. Press in the BATT (battery release)

button, slide the battery down, and

remove it.

2. Insert the battery sideways aligning

the marks on the battery compart-

ment and battery. Press on the

battery where shown while sliding it

up and locking it into place.

3. Close the LCD monitor and press it

gently until it locks into place.

ATTENTION: The RBRC seal on the battery used in your Thomson

Consumer Electronics product indicates that we are participating in a

program to collect and recycle Nickel Cadmium batteries throughout the

United States. Please call 1-800-8-BATTERY for information or

contact your local recycling center.

Ni-Cd

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

To AC Wall

Outlet 100-

240 Volts,

50/60 Hz.

Reference Marks

Adapter/Charger

Hold Battery

Flush and

Slide

REFRESH

Button

POWER

Indicator

CHARGE

Indictor

Caution: When a battery is attached to the adapter/charger, do not turn them

upside down. The battery may fall off and be damaged or cause injury.

Charge the Battery

5. Remove the power cord from the

AC outlet.

If the DC cable is attached to the DC

OUT jack on the adapter/charger, remove

its plug.

Refresh the Battery

The battery will provide increased

operation time if you “refresh” it before

every charging. The refresh feature

“refreshes” the battery by completely

discharging it. Refreshing takes

approximately 4 hours.

1. Plug adapter/charger into nearest AC

outlet (100-240V, 50/60Hz). The

POWER indicator lights.

2. Align reference marks on battery with

marks on adapter/charger, and slide the

battery in the direction of the arrow

until it locks into place.

1. Plug in the adapter/charger and

attach the battery.

3. If the battery is properly connected,

the adapter/charger’s CHARGE

indicator will light.

2. Press REFRESH. The CHARGE

indicator flashes slowly while the

battery discharges.

Note: The CHARGE indicator will flash

rapidly if the battery is not installed

properly. Remove the battery from the

adapter/charger and attach it again. If the

indicator still flashes, the battery cannot be

charged.

3. When discharging is completed, the

CHARGE indicator stops flashing.

Then the battery begins charging.

4. After the battery is charged, the

CHARGE indicator turn off.

4. When the CHARGE indicator turns

off, remove the charged battery by

sliding it off the adapter/charger.

Download from Www.Somanuals.com. All Manuals Search And Download.

First-Time Operation

Battery Level Indicator

The battery level indicator appears when approximately half the battery

power is left. This indicator shows you the amount of power in the

rechargeable battery.

• When there is approximately five

minutes of battery power left in the

battery, appears. The

camcorder will turn off automatically

after a few seconds. Slide the POWER

switch up and turn off the camcorder

before replacing the battery.

The battery level indicator will not be

recorded on the tape when it appears.

Battery Level Indicator

in Viewfinder or on LCD Monitor

• As the power is used

and appear.

Battery Care and Storage

• Store the battery pack in a place that

does not reach high temperatures.

• Let a hot battery cool down before

attaching it to the AC adapter/charger.

• Remove the battery from the

camcorder when it is not in use to

prolong the battery life.

The battery operating time may be shorter

than normal even after a full charge.

• If it is being used for the first time.

The operating time is restored after the

battery has been refreshed and re-

charged for two or three times.

• The battery will provide increased

operation time if you “refresh” it

before every charging.

• Recharge the battery just before it is

used. If the battery is recharged and

not used, it will slowly lose its charge.

• If it is used in low temperatures.

• If it is stored at temperatures above

104ºF (40ºC).

• Charge the battery within a tempera-

ture range of 50ºF to 86ºF (10ºC to

30ºC) to prevent damage.

• If it is discharged completely and

stored for a long period (more than

three months).

• After repeated charging and use,

operation time will gradually decrease.

When operation time becomes too

short to be useful, it is time to replace

the battery.

• If the record-pause mode is used

frequently.

• If cassette loading and unloading is

excessive.

• Frequent zooming in and out.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Install Remote’s Lithium Cell

The remote’s lithium cell is packed

separately. Install it in the remote as

follows:

3. Replace the cell holder in remote by

pressing in until it clicks into place.

Notes: Never place anything heavy on top of

the remote control or lay it upside-down.

1. Turn the remote over, insert a pencil or

paper clip in the small hole, and slide

the cell holder in the direction of the

arrow to remove it.

Replace cell when camcorder fails to respond

to remote.

Remove cell from remote if it will not be used

for a month or more. This will prevent

possible damage from cell leakage. If leakage

occurs, wipe up liquid inside compartment and

replace cell.

Cautions: Lithium cell must be

disposed of properly. Never handle

punctured or leaking cell. May cause

burns or personal injury.

Keep out of the hands of children.

Can cause death or injury if

swallowed. If swallowed, consult a

physician immediately for emergency

treatment.

2. Insert the cell in the cell holder so the

positive (+) terminal faces up.

The lithium cell used in this device

may explode resulting in a fire or

chemical burn if mistreated. Do not

recharge, disassemble, heat above

212°F (100°C), or incinerate.

Never use metallic tweezers to hold

the cells, and never short circuit the +

and – sides of the cell.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Remote Control Buttons

A brief description of the remote button’s functions is given here. Many of the

buttons perform the same function as the corresponding control on the

camcorder. The battery must be installed as shown on the previous page.

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

F.FWD

PAUSE

Camcorder in the VCR Mode

COUNTER MEMORY and RESET

Buttons

• When the camcorder is stopped, press

F.FWD to fast forward the tape. Press

STOP to stop fast-forwarding the tape.

• These buttons are used with the time

counter and memory-stop feature.

• When a tape is playing, press and

hold F.FWD to visually search for-

ward. Release F.FWD to return

to normal playback.

•

Details are on page 34.

DISPLAY Button

• Press this button to have the

camcorder’s displays appear on a TV

monitor connected to the camcorder.

PAUSE Button

• During playback, press PAUSE to

• Details are on page 26.

produce a stop-action picture.

F.FWD (Fast Forward) Button

Caution: Pause is designed for

momentary interruptions and should

not be used for an extended period

of time. If the camcorder remains

in pause for more than three

Camcorder in the CAM (Camera) Mode

• When the camcorder is in record-

pause, press and hold F.FWD to

visually search the tape forward.

Release F.FWD to return to

record-pause.

minutes, it will automatically enter

the stop mode and then turn off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Control

Press PAUSE or PLAY to return to

reverse. Release REW to return to

normal playback.

PLAY Button

REC (Record) Button

• When the camcorder is in the VCR

• When the camcorder is in the CAM

(camera) mode, press REC to start and

stop recording.

mode, press PLAY to begin playback.

REW (Rewind) Button

STOP Button

Camcorder in CAM (Camera) Mode

• When the camcorder is in the VCR

mode, press STOP to stop playback,

rewind, or fast-forward operation.

• When the camcorder is in record-

pause, press and release REW to review

the last few seconds of your recording.

• When the camcorder is in record-

pause, press and hold REW to visually

search the tape in reverse. Release

REW to return to record-pause.

ZOOM Buttons (T and W)

• When the camcorder is in the CAM

(camera) mode:

• Press T to move the lens in the

Camcorder in VCR Mode

telephoto (close-up) direction.

• Press W to move the lens in the

• When the camcorder is stopped, press

REW to rewind the tape. Press STOP

to stop rewinding the tape.

wide-angle direction.

• When a tape is playing, press and

hold REW to visually search in

Remote Control Sensor

The remote operates the camcorder by infrared light, so it is protected from

electrical and sound interference. However, the remote must be aimed directly at

the camcorder’s remote sensor. There cannot be any obstructions between them.

Note: The camcorder may not respond to the

remote if the remote sensor is exposed to

direct sunlight or strong artificial light.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Cassettes

Make sure you select good quality tapes for your camcorder. Use of poor

quality tapes or tapes that have been damaged or mishandled can contaminate

the video heads, resulting in a snowy picture or no picture at all during

playback. Because there is no control over the type of tape purchased or

rented by consumers, head cleaning is not covered under warranty. It is

considered normal maintenance.

Erase Protection – Safety Tab

You can protect your video cassettes from being erased by closing the safety tab.

To erase a previous recording, just record over it.

Safety Tab

To prevent erasure,

close safety tab and

expose red.

To record again,

open safety tab.

Red disappears.

Recording Times

The camcorder records and plays back

in standard speed (SP). Maximum

recording times for some 8mm

Cassette Recording Time

T6-15

T6-20

T6-45

T6-60

T6-90

T6-120

T6-150

15 Minutes

20 Minutes

45 Minutes

60 Minutes

90 Minutes

120 Minutes

150 Minutes

cassettes using SP speed are listed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Cassettes

Insert or Remove a Cassette

Caution: Insert the

cassette only one way

with the safety tab at

the top and the tape

window facing out.

The cassette should

slide easily into the

compartment. Do not

force the cassette.

Safety Tab

Tape

Window

EJECT

Button

PUSH Here to Close

Compartment

POWER

Switch

• Press the EJECT button to open the

compartment by pressing on the area

labeled PUSH until it clicks into place.

The top closes automatically.

cassette compartment.

• When inserting the cassette, make sure

the safety tab is at the top and the tape

window is facing out.

Caution: Do not press down on the

top as it may damage the camcorder.

• After inserting or removing the

cassette, gently close the cassette

Cassette Care and Storage

• When you are finished with a cassette,

rewind it, remove it from the

camcorder, and label it.

• Keep dust from entering the cassette

compartment. All dust is abrasive and

will cause excessive wear on the tape

and the camcorder’s recording or

playback heads.

• Store cassettes vertically in their

protective cases at normal room

temperatures. Do not leave your

camcorder or cassettes in a car or

outdoors for an extended period.

Excessive heat or cold may damage

your cassettes.

• Do not use cassettes with damaged or

spliced tape.

• Do not use a cassette if it has been

damaged or exposed to moisture. The

tape may jam and/or damage your

camcorder.

• Keep cassettes away from strong

magnetic fields such as electric motors

and other devices.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Making a Recording

These steps tell you how to make a recording and suggest using some

of the recording features. Each feature is described in detail on the

following pages.

Viewfinder

Eyepiece

Focus

Control

Lens Cap

CAM

(Camera)

Indicator

Beep

Indicator

VCR

CAM

BRIGHT

Control

LCD

Zoom

Lever

Monitor

POWER Switch

REC START/STOP

Button (Thumb

Trigger)

DISPLAY BLANK

REW

PLAY F.FWD

Attach Power Supply

Button

(Adapter/Charger or

Rechargeable Battery)

STOP PAUSE

EJECT

PLAY

Button

F.FWD

Button

STOP

Button

EJECT

Button

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

1. Attach a power supply.

• The camcorder will automatically

turn off if it remains in record-

pause for three minutes. Slide the

POWER switch upward to turn the

camcorder back on.

Attach the adapter/charger or charged

battery.

2. Remove the lens cap and attach it

to the handstrap.

• The camcorder has a beeper that

beeps for certain functions. The

beep indicator flashes with the

beeps. To turn off the beeper, press

and hold STOP and PLAY together

until BEEP OFF appears on the

monitor or in the viewfinder.

Details on page 27.

3. Slide the POWER switch upward to

turn on camcorder.

The CAM indicator will light and the

camcorder will enter record-pause.

PAUSE appears in the viewfinder or

on the LCD monitor.

4. Insert a tape.

7. Zoom in and out.

• Press EJECT to open the cassette

• Zoom in and out using the T and W

compartment.

zoom lever.

• Insert the cassette with the safety

tab facing up and the tape window

facing out.

8. Review what you have recorded.

• Press and quickly release REW to

review the last few seconds of your

recording.

5. Adjust the position of the LCD

monitor or viewfinder for

comfortable viewing.

• Press and hold REW or F.FWD to

visually see what you have re-

corded. Release the button to begin

recording at that point.

• If you are using the LCD monitor,

use the BRIGHT control to adjust

the brightness of the monitor.

• If you are using the viewfinder,

adjust the eyepiece focus control

for your vision.

9. When you are finished, slide the

POWER switch upward to turn off

the camcorder, close the monitor,

and replace the lens cap.

6. Start and stop recording.

• Press and release the REC START/

STOP button (thumb trigger) to

start recording. REC appears on

the LCD monitor or in the

viewfinder.

• Press and release the thumb trigger

again to stop recording. The

camcorder is now in record-pause.

PAUSE appears in the viewfinder

or on the LCD monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Viewing What You Are Recording Using the Viewfinder or

LCD Monitor

You can watch what you are recording in the black-and-white viewfinder or on

the color LCD monitor. Opening the monitor turns off the viewfinder unless

the monitor is rotated 130º or more.

Using the Viewfinder

The camcorder’s viewfinder is a miniature black-and-white monitor that

displays the picture seen by the camcorder when recording. For convenient

viewing, you can rotate the viewfinder up and down.

Cautions: Do not force

the viewfinder to rotate

Viewfinder

completely around. This

will damage the

Eyepiece Focus

Control

viewfinder and/or the

camcorder.

When carrying the

camcorder with the

shoulder strap, place the

viewfinder down. This

helps prevent possible

damage to the viewfinder

from bumping against

your body as you move.

Do not direct the

viewfinder toward the sun

or key parts in the cavity

may burn.

Eyepiece Focus Control

The eyepiece focus control lets you set the focus of the viewfinder for your vision.

If you wear eyeglasses, you probably can operate the camcorder without them.

It is easiest to set the correct focus by

focusing on one of the viewfinder’s on-

screen displays. Look through the

viewfinder and adjust the eyepiece focus

control for your vision.

The eyepiece focus control does not affect

the focus of the picture actually recorded

by the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Using the LCD Monitor

The camcorder’s LCD monitor is a miniature color monitor that displays the

picture seen by the camcorder when recording.

OPEN

Button

1. Press the OPEN button to open the

Note: When the monitor is opened,

the viewfinder is normally turned off.

However, if the monitor is rotated 130º

to 180º, the viewfinder will remain on

so the subject and the camcorder

operator can both see what is

LCD monitor.

2. Rotate the monitor into a comfortable

viewing position. The monitor can be

rotated 180º and pushed back against

the camcorder.

being recorded.

• Tilt the monitor down to record

from a high angle, such as over a

crowd.

• Adjust the brightness of the image in

the monitor by rotating the

BRIGHT control.

• Tilt the monitor up to record from a

low angle, such as when you are

kneeling.

Note: When recording on a bright sunny

day, the LCD monitor may be hard to see.

Use the viewfinder.

3. When you are finished recording,

rotate the LCD monitor toward the

camcorder, close the monitor, and press

it gently until it locks into place.

• Rotate the monitor 180º so the

subject being recorded can view the

monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

LCD Monitor and Viewfinder Displays

REC

AE:100 M 0:00:00

TAPE

FOCUSLOCK

BEEP ON

PM 8:30:00

11.18.1997

Displays in LCD Monitor or Viewfinder

Auto Exposure Higher Shutter

Speed Indicator (AE:100, AE150, or

AE:250)

BEEP ON Indicator

•

BEEP ON or BEEP OFF appears

when you turn the beep function on

or off.

• A shutter speed (1/60, 1/100, 1/150, or

1/250 second) is automatically selected

by the camcorder.

•

Details are on page 27.

• No indicator appears for the 1/60

second shutter speed.

Date Display (AUTO DATE, Date,

Date and Time, or 88:88)

• AE:100, AE150, or AE:250 will appear

when one of the shutter speeds has

been selected by the camcorder.

• AUTO DATE, the date, or the date

and time appears in this area of the

viewfinder when you press the DATE

button.

Battery Level Indicator (

)

• These displays will be recorded on the

tape when they appear.

•

This indicator shows how much power

is left in the rechargeable battery.

• Details are on page 33.

•

Details are on page 14.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

• 88:88 appears when the clock’s lithium

cell has not been installed or needs to

be replaced.

Warnings and Information

The following warnings with the excep-

tion of the TAPE indicator cause the

camcorder to beep ten times.

• Details are on page 31.

• TAPE appears during recording when

there is approximately five minutes of

recording time left on the tape.

Focus Indicators (FOCUSLOCK

and )

• FOCUSLOCK appears briefly when

you lock the focus with the FOCUS

LOCK button. Then remains during

focus lock.

• TAPE END appears during recording

when the tape is at its end or when a

cassette is inserted with its tape already

at the end.

• Details are on page 30.

•

appears when the safety tab on the

Status Displays

cassette has been closed, there is no

cassette in the camcorder, or condensa-

tion has formed inside the cassette or

camcorder.

Several status displays appear to let you

know what the camcorder is doing.

• FF appears during fast-forward

operation.

•

appears when moisture (condensa-

• PAUSE appears during record-pause.

• REC appears during recording.

• REW appears during rewind.

tion) has formed inside the cassette or

camcorder. The camcorder will not

operate. Place the camcorder or

cassette in a warm, dry area until the

indicator disappears.

• STOP appears during stop-action

pause.

Zoom Indicator ( )

Tape-Remaining Display

(

)

• The zoom indicator appears here when

you use the zoom lever.

• The tape-remaining display shows the

approximate amount of tape remaining

in the cassette.

• Details are on page 29.

• Details are on page 28.

Time Counter (M 0:00:00)

• The time counter appears during

recording and playback. It is not

recorded.

• An “M” appears in front of the time

counter when memory-stop feature

is on.

• Details are on page 34.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

VCR/CAM Button in CAM

(CAM (Red) Indicator Lights)

VCR

CAM

Beep Indicator

DISPLAY BLANK

DISPLAY Button

REW Button

PLAY Button

STOP Button

REW

PLAY F.FWD

F.FWD

Button

STOP PAUSE

EJECT

in record-pause. Make sure the

camcorder is in the CAM mode.

Flying Erase Head

A separate erase head is mounted on

• Press and hold REW to visually search

the spinning headwheel (hence the term

“flying”). This allows you to make

clean edits without the “glitches” or

“rainbow noise” that may occur at the

beginning or the end of recordings.

the recorded tape in reverse.

• Press and hold F.FWD to visually

search forward on the recorded tape.

Release the button to return the cam-

corder to record-pause at that point on the

tape. Press the thumb trigger (REC on

remote) to start recording at this point.

Quick Review Feature

Press and release REW when the

camcorder is in record-pause to review

the last few seconds of a recording.

Make sure the camcorder is in the

CAM mode.

DISPLAY Button

• Press the DISPLAY button when the

camcorder is connected to a TV

monitor to have the viewfinder or

LCD monitor displays appear on the

TV screen.

The camcorder will play back the last

few seconds of the recording, return the

tape to its previous position, and return

to record pause.

• These displays will be recorded during

tape copying if they appear.

Camera Edit Feature

• Press DISPLAY again to remove the

The camera edit feature allows you to

position the tape when the camcorder is

displays from the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

ZOOM

DISPLAY

Button

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

REW

Button

F.FWD

Button

PAUSE

Microphone

Beep Feature

The microphone picks up the sound

The camcorder has a beep feature that

during a recording. It is more sensitive to operates as follows. The beep can be

sounds coming from the direction the lens turned on or off.

is pointed.

• One beep for a standard function

(turning power on, starting recording

or playback, ejecting a tape, etc.).

Automatic White Balance

and Iris

• Two beeps for stopping a recording.

The camcorder automatically adjusts

white balance and the iris for the current

conditions to give you the best recording.

• Ten beeps for a warning such as TAPE

END, no cassette (

), or dew (

• The beep indicator flashes during beep

operation.

AE (Automatic Exposure)

Shutter Speed Control

Turning the Beep On or Off

The camcorder automatically adjusts the

shutter speed (1/60, 1/100, 1/150, or 1/250)

according to the lighting conditions.

• Place the camcorder in record-pause.

• Press and hold the STOP and PLAY

button together for a few seconds.

• The 1/60 second speed is selected for

normal recording. No indicator

appears for 1/60 second.

• BEEP OFF or BEEP ON appears in

the viewfinder or on the LCD monitor.

Note: The beep feature remains on until you

• When recording in bright light, a

higher shutter speed is selected. The

indicator (AE:100, AE:150, or AE:250)

for the speed selected will appear.

turn it off or the lithium cell is changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

DISPLAY BLANK

BLANK

Button

REW

PLAY F.FWD

STOP PAUSE

EJECT

Blank Search

Tape-Remaining Display

The camcorder will advance through the

tape and look for a blank section. This

helps you locate the end of the last

recorded section.

The camcorder will automatically

calculate the amount of recording time

left on the tape in the camcorder during

recording or playback.

1. Place the camcorder in record-pause in

the CAM mode or stop in the VCR

mode to blank search.

• The tape-remaining indicator will

appear in the viewfinder or LCD

monitor when you reach the halfway

point of the tape.

2. Press the BLANK button. The

camcorder will fast-forward or rewind

the tape to the end of the recorded

section and enter record-pause or stop.

Notes: Make sure the camcorder has

stopped at the point where you want to

begin recording. If there are blank sections

of tape between recordings that are 60

seconds long, the camcorder may stop at

this point.

•

and

appear as

you near the end of the tape. TAPE

END flashes when you reach the end of

the tape.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Zooming

You can zoom in and out for close ups or wide-angle shots just by sliding the zoom

lever on the camcorder. The camcorder can automatically focus when you zoom at

most distances.

ZOOM Buttons

ZOOM

Zoom Lever

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

F.FWD

PAUSE

Using the Zoom Lever

1. To zoom in or out, slide the zoom

lever on the camcorder or press

ZOOM T or W on the remote.

The zoom level indicator appears in the

viewfinder or on the LCD monitor.

• To move the lens in the telephoto

(close-up) direction, slide the zoom

lever toward T (press ZOOM T

on remote).

• To move the lens in the wide

angle direction, slide the zoom

lever toward W (press ZOOM W

on remote).

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Focusing

Under normal conditions, the camcorder can adjust focus automatically

on the object located in the center area of the viewfinder. Under certain

conditions, you may want to use the focus lock feature.

FOCUSLOCK

FOCUS LOCK

Button

Using Focus Lock

not function properly because of picture

instability. Using a tripod helps stabilize

the focus.

The focus lock feature is useful when

objects pass between your subject and

the camcorder or your main subject is

not located in the center of the scene

you are recording.

Conditions Requiring Focus Lock

• When recording a subject through a

dirty window.

1. Center the main subject in the scene

you want to record.

• When recording two subjects at

different distances that overlap in the

same scene.

2. Press the FOCUS LOCK button to

turn on the focus lock feature.

FOCUSLOCK appears briefly in the

viewfinder or LCD monitor and

the indicator remains when the

focus lock feature is turned on.

• When recording a horizontally or

vertically striped subject.

• When the subject is not in the center of

the scene you are recording.

3. Press the FOCUS LOCK button

again to turn off the focus lock

feature. The indicator disappears.

• When recording very bright subjects.

• When recording a subject without

contrast, such as a white wall.

Note: When zooming in to record a

subject in the distance, auto focus might

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Date/Time Display — Clock Lithium Cell

The clock cell indicator 88:88 will flash for a few seconds in the viewfinder

when you turn on the camcorder if the clock lithium cell has not been installed

or needs to be replaced.

Clock Cell (+ Side Facing Up)

Clock Cell Holder

4. Slide the clock cell holder with the

cell into the camcorder until it clicks

into place.

Install the Clock Lithium Cell

1. Make sure camcorder is turned off,

and remove any power supply

attached to the camcorder.

Remove the Cell

2. Pull out the clock cell holder.

1. Slide the cell holder out of the

camcorder.

3. Insert the clock cell with the “+”

terminal facing up in the cell holder.

2. Remove the cell from the cell holder.

Cautions: Lithium cell battery. Replace only with 3-volt lithium cell – such

as CR2025. Use of other cell presents a risk of fire or explosion. Must be

disposed of properly. Never handle punctured or leaking cell. May cause

burns or personal injury.

Keep out of the hands of children. Can cause death or injury if swallowed. If

swallowed, consult a physician immediately for emergency treatment.

The lithium cell used in this device may explode resulting in a fire or chemical

burn if mistreated. Do not recharge, disassemble, heat above 212˚F (100˚C), or

incinerate.

Never use metallic tweezers to hold the cell, and never short the + and – sides

of the cell.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Date/Time Display — Setting the Time and Date

The correct date and time must be set before it can be displayed and

recorded on your tapes. The clock cell must be installed as shown on

the previous page before the date can be set and recorded.

AM 0:00:00

1.1.1997

Time and Date Display

DATE Button

FOCUS LOCK Button

Set the Time and Date

1. Make sure the camcorder is in the

record-pause mode.

6. After you set the minutes, press the

FOCUS LOCK button to start the

clock and remove the flashing cursor

from the display.

2. Press and hold the DATE and FOCUS

LOCK buttons together until the reset

time and date appear.

Correct the Time and Date

A flashing cursor lets you know which

part of the display you are setting.

1. Make sure the camcorder is in the

record-pause mode.

3. Repeatedly press the DATE button

2. Press and hold the DATE and FOCUS

LOCK buttons together until the reset

time and date appear.

until the correct month appears.

4. Then press the FOCUS LOCK button

to move the flashing cursor to the next

part of the display.

3. Correct the time and/or date using the

DATE and FOCUS LOCK buttons.

5. Repeat steps 3 and 4 until you have

entered the correct month, day, year,

hour with AM or PM, and minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

To Record the Date or Date and Time on Your Tape

The date or date and time can be recorded on your tape. Whenever one of the

displays appears, it will be recorded. The camcorder also has an AUTO DATE

feature that will record the date at the beginning of the first recording of the day.

The clock cell must be installed and the clock set to record the correct date or time.

Date/Time Displays

Repeatedly Press the DATE Button

AUTO DATE

1 1 . 1 8 . 1 9 9 7

Date Display

AUTO DATE Display

AM 1 2 : 0 0 : 0 0

1 1 . 1 8 . 1 9 9 7

No Display

Date and Time Display

Select the Date or Time and Date

to Record

1. Repeatedly press the DATE button to

• Select date only to continuously

record the date.

select the display you want to record.

• Select AUTO DATE to automati-

cally record the date for 15 seconds

at the beginning of the first

recording of the day.

• Select date and time to contin-

uously record the time and date.

• Select no display if you do not want

to record the date or date and time

on your tape.

Note: AUTO DATE will remain

selected even when the camcorder’s

power is turned off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Time Counter

The time-counter display shows the actual time elapsed when recording or

playing back a segment of tape. During playback, the memory-stop feature

helps locate a certain point on the tape. When memory stop is on, the tape

will stop automatically during rewind or fast-forward when the time counter

reaches M 0:00:00.

ZOOM

COUNTER

MEMORY

DISPLAY

REC

Button

COUNTER

RESET

COUNTER

MEMORY RESET

STOP

Button

STOP

REW

PLAY

Button

REW

Button

F.FWD

PAUSE

DISPLAY BLANK

M 0:00:00

REW

PLAY F.FWD

VCR/CAM

Button and

VCR Indicator

Button

STOP PAUSE

EJECT

PLAY

Button

STOP

Button

Time Counter With Memory

Stop Turned On

To Use the Memory-Stop Feature

4. Continue to play the tape. When you

want to return to the place you

1. Locate the place on the tape you want

to return to, press the VCR/CAM

button to light the VCR indicator, and

press PLAY.

marked, press the STOP button.

5. Press the REW button. The tape will

rewind to the time counter reading

of M 0:00:00.

2. Press the COUNTER RESET button

on the remote to reset the time counter

to 0:00:00.

Notes: During rewind, the tape might not

stop exactly at the M 0:00:00 point.

3. Press the COUNTER MEMORY

button on the remote control to turn

memory stop on. An M appears in

front of the time counter when

memory stop is on.

A minus ( – ) will appear in front of the

time counter if the tape is rewound farther

back than a time counter reading

of 0:00:00.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording

Recording Tips

• In case of fire or theft, make a video

recording of your home and contents to

store in a safe place.

• Be aware of video and audio back-

grounds. Background details barely

noticed while you are taping may

show up as visual “clutter” on your

recording. Background noises

(especially TV sets, radios, household

appliances, traffic sounds, etc.) can

detract from the sound you want to

record.

• Try to make sure indoor scenes are

well-lit.

• Do not move the camcorder rapidly

from side-to-side while recording.

A steady, gradual “pan” avoids

blurring and “jitter”.

• Avoid long “still” shots of landmarks

and scenic attractions. Recordings are

more interesting if they include people

and details. “Local color” will give

travel videos lasting appeal. Consider

recording a familiar or landmark scene

from an unfamiliar vantage point.

• Use the viewfinder or LCD monitor to

make sure the camcorder is level while

recording or your scenes will

appear “tilted”.

• Do not bump or tap the camcorder’s

microphone while recording because

this sound will be recorded.

• Include close-ups of individuals

when taping family outings or

group functions.

Traveling Tips

• Write down your camcorder’s serial

number and keep it separate from the

camcorder when traveling. If your

camcorder is lost or stolen, you will be

able to identify it.

• Make sure you have any plug adapters

that you may need before taking your

camcorder to other countries. Consult

your dealer for advice.

• Carry your camcorder in a carrying

case when traveling. See page 42 for a

case designed especially for this

camcorder. An ordinary suitcase or

carry bag does not offer the protection

your camcorder needs. Treat your

camcorder as carry-on luggage to

protect it from rough handling.

• Use extra care to avoid damage to your

camcorder and accessories when

operating them at a beach or pool.

Spray, sand, and dust should be

avoided. If your lens has been exposed

to the elements, clean it only with

proper lens cleaning supplies.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Using the LCD Monitor or Viewfinder

You can view tapes in color using the LCD monitor or in black-and-white

using the viewfinder. The viewfinder will be turned off when you open the

monitor. You can hear the sound from the tapes on the built-in speaker when

you use the monitor.

Viewfinder

Eyepiece Focus Control

Speaker

VCR

CAM

BRIGHT

Control

VCR/CAM

Button

VOLUME

Control

VCR (Green)

Indicator On

OPEN

Button

POWER Switch

DISPLAY BLANK

REW

PLAY F.FWD

F.FWD Button

PAUSE Button

EJECT Button

REW Button

PLAY Button

STOP Button

STOP PAUSE

EJECT

To Play Back a Tape

1. Attach a power supply, and slide the

POWER switch up to turn on the

camcorder.

• Adjust brightness with the BRIGHT

control.

• Adjust the volume of the speaker

with the VOLUME control.

2. Press the VCR/CAM button to light the

VCR (green) indicator.

Use the Viewfinder

3. Press EJECT to open the cassette

compartment and insert the cassette

you want to play back. Close the

cassette compartment.

• Adjust the viewfinder for conven-

ient viewing.

• Adjust the eyepiece focus control

for your vision.

4. Use the LCD monitor or viewfinder to

view what you are playing back.

5. Press PLAY to begin playback. During

playback, use the playback features

described on the next page.

Use LCD monitor

•

Press the OPEN button and open

the monitor. Adjust the monitor for

convenient viewing.

6. Press STOP when you are finished.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Features

ZOOM

DISPLAY

REC

COUNTER

MEMORY RESET

STOP

REW

PLAY

PLAY Button

STOP Button

F.FWD

REW Button

F.FWD Button

PAUSE

PAUSE Button

Visual Searching

Tape Positioning

1. During playback or play-pause, press

and release F.FWD or REW if you want

to search the tape visually in forward

or reverse.

1. Slide the POWER switch up to turn on

the camcorder.

2. Press the VCR/CAM button to light the

VCR indicator on the camcorder.

2. Release the button to return to normal

playback.

3. Press and quickly release REW or

F.FWD to rewind or fast-forward

the tape.

4. Press STOP to stop the tape.

Stop-Action Pause

1. During playback, press PAUSE to “stop

the action” and view one frame of the

tape.

Caution: Pause is designed for

momentary interruptions and should not

be used for an extended period of time.

If the camcorder remains in pause for

more than five minutes, it will automati-

cally enter the stop mode and then turn

off to prevent excessive tape wear.

2. Press PLAY or PAUSE to return to

normal playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback on TV (or VCR) with AUDIO/VIDEO IN Jacks

To connect your camcorder to a TV monitor (or VCR) with AUDIO/VIDEO IN jacks,

you will need the audio/video cable that came packed with your camcorder. If your TV

is already connected to a VCR, you can attach the camcorder to the VCR and watch

what the camcorder is recording or playing on the TV.

Back of

Yellow Video Plug

Mono VCR or

TV Monitor

White

Audio

Plug

Included

Audio/Video

Cable

AUDIO

VIDEO

Audio and Video Jacks

Located Behind A/V Cover

White

Audio

Plug

Yellow

Video

Plug

Back of

Stereo VCR or

TV Monitor

Yellow Video Plug

White

AUDIO

Audio

Plug

VIDEO

White

Audio

Plug

Optional Y-Adapter

(such as AH25)

Included

Audio/Video

Cable

Yellow Video Plug

Installation

1. Attach the white plug on one end of

the included audio/video cable to the

AUDIO IN jack on the TV (or VCR).

2. Attach the yellow plug to the VIDEO

IN jack on the TV (or VCR).

3. Attach the white plug on the other end

of the audio/video cable to the A

Notes: If your TV (or VCR) has stereo

AUDIO IN jacks, attach the plug to the one

labeled MONO. If one is not labeled

MONO, you may need a Y-adapter, such as

AH25, shown on page 43 to hear both

channels.

(audio) jack (located under the small

cover) on the side of the camcorder.

4. Attach the yellow plug to the yellow

V (video) jack on the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Operation and How to Copy Tapes on the VCR

1. A. Camcorder connected directly to

TV: Turn on the TV and tune it to

the video input channel.

4. Press the PLAY button.

• During playback, use the playback

features on page 37.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line”

or “camera mode”. (If your VCR

does not have a “line” or “camera

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

5. To copy what the camcorder is

playing, place a blank cassette in the

VCR, and press the VCR’s RECORD

button.

Note: Make sure the memory-stop feature

is turned off (press COUNTER MEMORY)

or the camcorder will enter play pause

when the counter reaches M 0:00:00.

coming from the VCR.

6. Press STOP when you are finished.

2. Slide the POWER switch up to turn on

the camcorder.

Caution: The unauthorized recording

of copyrighted material may infringe

the rights of others.

3. Press the VCR/CAM button to place

the camcorder in the play mode. The

green VCR indicator will light.

Viewing What the Camcorder is Seeing (or Recording)

1. A. Camcorder connected directly to

TV: Turn on the TV, and tune it to

the video input channel.

2. Slide the POWER switch up to turn on

the camcorder. The red CAM

indicator will light.

Note: When the camcorder is used as a

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

B. Camcorder connected to VCR that

is already connected to TV: Turn

on VCR and place it in the “line”

or “camera mode”. (If your VCR

does not have a “line” or “camera

mode”, consult the VCR owner’s

manual.) Operate the TV as you

normally do to see the signal

3. Press the REC START/STOP button

(thumb trigger) to begin recording.

You can watch what the camcorder is

seeing (or recording) on the

TV screen.

coming from the VCR.

Notes: The remote will also operate the camcorder.

Press the DISPLAY button to have the camcorder’s displays appear on the TV

screen. During tape copying, these displays will be recorded when they appear on

the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback on a TV without Audio/Video Inputs

To connect your camcorder to a TV without audio/video inputs, you will need an

optional CRF800 output adapter and an optional coaxial RF cable, such as VH82 or

VH90 shown on page 43. If your TV has AUDIO and VIDEO IN jacks (or is connected

to a VCR), refer to pages 38-39.

VHF

Back of TV

FROM

ANT

Optional

RF Coaxial

Cable

(such as VH82

or VH90)

Optional

Transformer

(Such as VH54)

VHF

Back of TV

CHANNEL

4CH/3CH

Switch

VHF Antenna

Optional

CRF800 RF

Output Adapter

Optional 300-75 Ohm

Transformer

VHF Antenna

Installation

the adapter, and attach the other end to

the VHF input on your TV as shown.

1. Disconnect the VHF antenna from

your TV. Connect the antenna to the

connector on the RF output adapter

as shown above if you are going to

leave the adapter connected to the TV.

Note: If your TV has 300 ohm screw

terminals, you will need a 75/300 ohm

transformer, such as VH54, shown on

page 43.

Note: If your VHF antenna is the flat

twin-lead type attached by two screws,

you will also need an optional 300/75

ohm transformer.

3. Attach the RF output adapter’s plug to

the A, RF OUT, and V jacks located

under the small cover on the side of

the camcorder.

2. Attach one end of the optional coaxial

RF cable to the other connector on

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback

Playback Operation

4. Press the VCR/CAM button to place

the camcorder in the play mode. The

green VCR indicator will light.

1. Set the CHANNEL 4CH/3CH switch

on the RF output adapter to

CHANNEL 4CH or 3CH.

5. Press the PLAY button.

2. Turn on the TV, and tune it to the same

channel you selected with the RF

• During playback, use the playback

output adapter’s CHANNEL switch.

features on page 37.

3. Slide the POWER switch up to turn on

6. Press STOP on the camcorder when

the camcorder.

you are finished.

Viewing What the Camcorder Is Recording

Note: When the camcorder is used as a

1. Turn on the TV and tune it to channel

3 or 4. When the camcorder is used as

a camera, turn the TV’s volume down

to prevent a high-pitched squeal

caused by feedback.

camera, turn the TV’s volume down to

prevent a high-pitched squeal caused by

feedback.

4. Press the REC START/STOP button

(thumb trigger) to begin recording.

You can watch what the camcorder is

seeing (or recording) on the

TV screen.

2. Set the CHANNEL 4CH/3CH switch

on the RF output adapter to the same

channel you selected on the TV.

3. Slide the POWER switch up to turn on

the camcorder. The red CAM

indicator will light.

Normal TV Viewing

For normal TV viewing, you may leave

the RF output adapter hooked up to the

TV. Disconnect the adapter’s plug from

the camcorder or turn off the camcorder.

Note: The remote will also operate the camcorder.

Press the DISPLAY button to have the camcorder’s displays appear on the TV

screen. During tape copying, these displays will be recorded when they appear on

the TV screen.

Note to Cable TV Installer

This reminder is provided to call your attention to Article 820-40 of the National Electrical

Code (Section 54 of Canadian Electrical Code, Part I), that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be connected to the

grounding system of the building as close to the point of cable entry as practical.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

We invite you to take a look at some great ideas for sparking creativity and adding to

the fun of using your compact 8mm camcorder. The following pages have a selection

of accessories to help make your memorable moments look and sound even better.

These accessories are designed to make the process of recording and watching your

videos more enjoyable.

To order accessories, contact your local Dealer.

If a dealer is not nearby, all accessories are available through toll-free ordering or by

using the order form on page 45.

AC201A Soft Carrying Case

Custom compact soft case designed

with soft non-abrasive material and

especially to provide protection and utility generous padding. Has three outside

for your compact 8mm camcorder and

most accessories. Rugged fabric lined

pockets with storage for lens filters,

adapters, batteries, and tapes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

Coaxial RF Cables

CRF800 RF Output Adapter

VH82 (6-ft)

VH90 (12-ft)

These RF cables are used with the RF

This RF output adapter is used with a

output adapter to connect your camcorder coaxial RF cable, such as VH82 or VH90,

to a standard TV (one without audio/video to connect your camcorder to a standard

input jacks) for playback. If your TV has

300 ohm antenna screw terminals, you

will need an optional 75-to-300 ohm

transformer such as VH54. If your

antenna cable is the flat twin-lead type

attached by two screws, you will also

need an optional 300-to-75 ohm

transformer.

TV (one without audio/video inputs) for

playback. If your antenna cable is the flat

twin-lead type attached by two screws,

you will also need a 300-to-75 ohm

transformer. If your TV has 300 ohm

antenna screw terminals, you will need an

optional 75-to-300 ohm transformer such

as VH54.

AH25 Y-Adapter

VH54 Cable Transformer

This Y-adapter allows you to connect your

camcorder’s mono audio cable to a stereo

TV or VCR.

This 75-to-300 ohm transformer is used to

connect a standard 75-ohm antenna cable

(such as VH82 or VH90) to the 300 ohm

screw terminals on a TV.

All specifications and descriptions of accessories

are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Optional Accessories

Using the Optional AC088 Tripod

Mounting the camcorder on a tripod, such as AC088, will keep the camcorder

steady and produce excellent video results.

This tripod’s fluid-effect head provides smooth camera pan and tilt. The quick-

release mount makes it easy to attach or remove the camcorder. The grooved,

tubular 3-section leg design folds down to 26" when not in use. Rubber feet

allow for sure footing.

Cautions: Before using a tripod, make sure it is stable enough to hold the

camcorder without falling over. Do not transport the camcorder attached to the

tripod.

When attaching your camcorder to a tripod, be careful not to force the tripod screw

into the camcorder’s tripod mounting hole.

The tripod screw should not protrude into the camcorder more than approximately

three-eighth (3/8) inch. Forcing the screw could damage the mounting hole on the

bottom of the camcorder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

Order Form for Camcorder Model ProV600

Description

Part No.

AC088

AC201A

AH25

Price

Qty.

Total

Super Lightweight Tripod

Soft Camcorder Case

Y-Adapter

$ 39.95

2.95

Rechargeable Battery (Standard)

RF Output Adapter

DC Cable

AV55

$ 49.95

$ 59.95

$ 12.95

CRF800

DCC100

VH54

75-300 Cable Transformer

Coaxial RF-Cable

Audio/Video Cable

Coaxial RF-Cable

Shoulder Strap

2.95

6.95

5.95

7.95

VH82

217496

VH90

213004

238152

$ 12.95

$ 118.75

AC Adapter/Charger

Prices are subject to change without notice.

Total Merchandise ........................................................................................... $_________

Sales Tax .......................................................................................................... $_________

We are required by law to collect the appropriate

sales tax for each individual state, county, and

locality to which the merchandise is being sent.

Shipping and Handling .................................................................................... $

5.00

Total Amount Enclosed ................................................................................. $_________

Use VISA, MasterCard, or Discover.

Money order or check must be in U.S.

currency only. No COD or cash.

Please complete other side also

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

Charge your order on your VISA,MasterCard,

or Discover Card by filling in below

USE YOUR CREDIT CARD

IMPORTANT: Copy complete account number from your VISA card

Expiration date:

IMPORTANT: Copy complete account number from your MasterCard

Expiration date:

Copy Number above your name on MasterCard

IMPORTANT:

Copy complete account number from your Discover Card

Expiration date:

AUTHORIZED SIGNATURE

Prices are subject to change without notice.

A complete and correct order will

save you days of waiting.

Print or type your name and address

clearly. This will be your mailing label.

Name:

Street:

Apt:

Zip:

City:

State:

Please make sure that both sides of this form have been filled out completely.

• Allow 4 weeks for delivery.

• All accessories are subject to availability.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessory Order Form

To order accessories, contact your local Dealer.

If a dealer is not nearby, you can also follow the directions below to order by

telephone or direct-by-mail.

United States and Canada Orders

To place your order by phone, have your Visa, MasterCard, or Discover card ready

and call the toll-free number listed below between 8AM and 8PM (EST) Monday

through Friday or between 9AM and 5PM (EST) Saturday.

Use this number only to place an order for accessory items listed on

this order form.

1-800-338-0376

To place your order by mail, detach and mail the completed order form with credit

card information, money order, or check in U.S. currency (made payable to

Thomson Consumer Electronics, Inc.) to the following address:

Video Accessories

PO Box 8419

Ronks, PA 17573

Download from Www.Somanuals.com. All Manuals Search And Download.

Care and Maintenance

Cleaning the Camcorder

Caution: Use of strong cleaning

products, such as those containing

alcohol or benzine, may damage

the camcorder.

To clean the camcorder’s exterior, remove

any power source connected to the

camcorder and gently wipe it with a clean

soft cloth.

Cleaning the Camcorder’s Lens

To clean the camcorder’s lens, blow it

with a blower brush, and then gently wipe

the lens with cleaning tissue and

commercially prepared cleaning solution

designed for use on camera lens.

Improper cleaning may scratch the lens.

Caution: Do not touch the lens

with your fingers. The oil from

your skin can damage the lens.

Lens

Cleaning the Camcorder’s LCD Monitor

To clean the camcorder’s LCD

monitor, use a clean, soft cloth to

carefully wipe the monitor. Improper

cleaning may scratch the monitor.

Cleaning the Camcorder’s Viewfinder

The viewfinder eyepiece can be removed

for cleaning.

1. Turn the eyepiece counterclockwise

and pull it out.

3. Reattach the eyepiece by aligning the

reference marks, and then turn the

eyepiece clockwise until it clicks.

2. Remove dust using a blower brush.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customer Assistance and Service

Proper Care and Storage

subject the camcorder to swinging,

shaking, or dropping.

• Keep dust and grit from entering the

camcorder’s cassette door. Dust and

grit are abrasive and will cause

excessive wear to both the camcorder’s

recording/playback heads and

cassettes.

• Do not carry the camcorder using the

viewfinder or LCD monitor.

• Do not store the camcorder in

temperatures below -22°F (-30ºC) or

above 149°F (65ºC).

• When the camcorder is not in use,

always remove the cassette and AC

adapter/charger or battery.

• Always replace the lens cap when the

camcorder is not in use.

• Before handling your camcorder, make

sure your hands and face are free from

any chemical products such as suntan

lotion, as it may damage the finish.

• Retain the original carton for future

storage or shipping purposes.

• The camcorder can be damaged by

improper storage or handling. Do not

Things to Avoid

• Do not attempt to disassemble your

camcorder. There are no user-

serviceable parts inside.

• Do not operate the camcorder near the

ocean as salt water or salt water spray

may damage the internal parts of the

camcorder.

• Avoid operating your camcorder

immediately after moving it from a

cold location to a warm location. Give

the camcorder 1-1/2 to 2 hours to reach

a stable temperature before inserting a

cassette. When the camcorder is

moved from cold to warm,

• Do not operate the camcorder for

extended periods in temperatures

below 40°F (4ºC) or above 95°F

(35ºC).

• Do not expose the camcorder or

adapter/charger to rain or moisture.

If any component becomes wet, turn

off the power and take the unit to

an Authorized RCA Camcorder

Service Center.

condensation may cause the tape to

stick to the headwheel and damage the

headwheel or tape.

• Do not aim your camcorder at the sun

or other bright objects.

• Do not use an adapter/charger or

batteries other than the ones specified

for the camcorder. Use of the wrong

accessories may cause damage to the

camcorder.

• Do not leave your camcorder in direct

sunlight for extended periods of time.

The resulting heat buildup could

permanently damage the camcorder’s

internal parts.

• Do not operate the camcorder in

extremely humid environments.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

Troubles sometimes are caused by simple “faults” that you can easily correct without

the help of a service technician by first checking a few basic remedies.

Before you call or take your camcorder to an Authorized RCA Camcorder Service

Center, look below for the type of trouble you are experiencing. Then perform the

simple checks and adjustments listed for that trouble.

If service should be necessary, the warranty information lists what your warranty

covers and explains how to get service.

Trouble

Checks and Adjustments

No power

•

Slide the POWER switch upward to turn on the

camcorder.

•

If using battery, it may need to be recharged.

If using AC adapter/charger, make sure it is plugged

into a working outlet.

Won’t record or

playback

•

If using AC adapter/charger, make sure it is plugged

into a working outlet.

If the dew indicator ( ) flashes in the viewfinder, there is

moisture in the camcorder. Wait until the dew indicator

no longer appears before operating the camcorder.

Make sure VCR/CAM button is in correct position

(VCR or CAM) for desired operation.

•

There may not be a cassette in the camcorder.

Try ejecting and reinserting the cassette.

The cassette tape may be broken, try another cassette.

You may have reached the end of the cassette, try

rewinding it.

Won’t playback

Won’t record

•

VCR/CAM button must be in VCR mode.

•

Safety tab has been closed. (See page 18.)

VCR/CAM button must be in CAM (camera) mode.

No picture

•

Remove lens cap.

Camcorder turns

itself off

Slide POWER switch upward to turn camcorder back

on. If camcorder is left in record-pause or play-pause

for several minutes, it will turn itself off to prevent tape

wear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

Trouble

Checks and Adjustments

Tape stops during

rewind or fast

forward

•

Time-counter memory may be on. Whenever an “M”

appears with the time-counter display, the camcorder will

stop rewinding (or fast forwarding) when counter reads

M 0:00:00. Press REW or F.FWD again to continue

rewinding or fast-forwarding, or press COUNTER

MEMORY on the remote to turn off the memory-

stop feature.

Camcorder remains in

pause mode

•

Press PLAY or PAUSE to return to normal playback.

Recorded sound is

too low or distorted

Subject was too far from camcorder.

Dew indicator

flashing in viewfinder

If the dew indicator ( ) flashes in the viewfinder, there

is moisture in the camcorder. Wait until this indicator no

longer appears before operating the camcorder.

Poor auto-focus

operation

•

Subject is not in center of viewfinder or two subjects are

at different distances. Use the focus lock feature. See

page 30.

Viewfinder displays

are out of focus

•

Lens is smudged and image appears unfocused.

Eyepiece focus control is misadjusted.

The small controls on the bottom of the viewfinder control

the brightness and focus of the viewfinder. These controls

are set at the factory and should require no adjustment. If

the brightness or focus of the viewfinder ever does require

adjustment, carefully use a plastic screwdriver. Make the

adjustments with caution to prevent damaging the

miniature controls.

Image in LCD

monitor is not bright

enough.

•

Adjust brightness of LCD monitor with BRIGHT control

on top of the monitor.

Sound too low when

playing back tape

using LCD monitor

Adjust volume of built-in speaker using the VOLUME

control on top of the monitor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Trouble Checks

Trouble

Checks and Adjustments

Date and/or time were • Displays will be recorded on tape whenever they

recorded on tape

appear in the viewfinder. Remove them from

viewfinder when recording. See page 33.

When AUTO DATE is selected, the date will

automatically be recorded when you begin recording

or change the cassette. See page 33.

•

Date and/or time are

incorrect

•

Clock lithium cell battery may need replacing.

See page 31.

Date or time may need to be set. See page 32.

Vertical white lines

appear when shooting

bright object

This may occur when background extremely

contrasts with the subject.

Rechargeable battery

runs down sooner

than expected

•

If battery has not been used for some time,

completely drain the battery’s power and then

recharge it.

Battery run times are measured when the camcorder

is recording continuously. You can check your

battery by first fully charging it and then aiming the

camcorder at a clock and recording the picture of the

clock. When the recording stops, play the last

recorded section and note the clock time. A one-hour

battery should give you about 50 minutes of

recording time using the LCD monitor. In practical

use, you may not be able to record for the full time

because the camera uses battery power when it is

waiting between recordings (record-pause) and

zooming.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customer Assistance and Service

Thomson provides a toll-free telephone

You can reach Thomson at the

following number:

number to help you with any problems you

may encounter with your camcorder. Many

can be diagnosed over the phone, and if

necessary, repair or replacement will be

arranged. Please have your camcorder model/

serial number and date of purchase ready

when you call. If your unit is out of warranty,

we will quote the cost of a repair or

800-283-6503

(Toll free inside U.S.A.)

Our toll-free Camcorder number

operates from 8 a.m. to 5 p.m., CST

Monday – Friday

for U.S. customers only

replacement unit to you.

Returning equipment to Thomson for repair or exchange

Always consult Thomson and get a Return

If we are unable to resolve your problem over

the phone, we will gladly service your unit or

exchange it for a new or refurbished

camcorder. Refer to the limited warranty on

the reverse side to learn about your specific

rights and responsibilities.

Authorization number before returning

anything! Obtain a Return Authorization

(RA) number from the telephone

representative before returning your

equipment to avoid delays, accounting errors,

or even loss of your unit.

Important information to customers who ship defective equipment to

Thomson Consumer Electronics

The Thomson representative who authorized

the return of your equipment will give you an

RA number over the phone. They will also

provide you with instructions on where and

how to return your Camcorder. Write the

number in large, clear characters on the

outside of the box. To avoid confusion and

misunderstandings, shipments without an RA

number clearly visible on the outside of the

box will be returned to you at your expense.

are located on the bottom of your unit.

If your Camcorder is within the warranty

period, please provide a copy of the bill of sale

to verify purchase date. Use the original box

and packing material to protect the equipment

from damage in shipment.

For your protection, insure all shipments for

full replacement value and use a reliable

shipper. Thomson assumes no responsibility

for warranty shipments from the customer to

the factory if not shipped in the manner

prescribed by Thomson.

Include a brief note describing the problem

and any conversations about the problem you

have had with Thomson personnel.

Include your name, address and model/serial

number of your Camcorder. These numbers

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

exchange point next business day delivery

in the continental U.S.A.

What your warranty covers:

•

Any defect in materials or workmanship.

2. The exchange location will notify you of

its arrival.

For how long after your purchase:

3. Take your unit, excluding all accessories,

and your evidence of purchase date, such

as a bill of sale, to the exchange location

and you will be provided the new or

refurbished unit.

•

90 days for labor charges.

One year for parts.

The warranty period for rental units begins

with the first rental or 45 days from date of

shipment to the rental firm, whichever

comes first.

4. If the repairs were covered by your

warranty, you will not be billed.

What we will do:

During the initial 90 days

If you are not located near an exchange

point:

•

Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. Parts will be

provided at no charge, but you will be

responsible for the cost of labor required

for the repair.

1. Provide your Discover, MasterCard, or

Visa account number and expiration date

to our phone representative. This is for

security purposes. If we receive your unit,

excluding all accessories, within 14 days

from the date you were provided the RA

number, only items not covered by

warranty will be charged to your account.

IF YOUR UNIT IS NOT RECEIVED

WITHIN 14 DAYS, THE SUGGESTED

RETAIL VALUE OF THE CAMCOR-

DER WILL BE CHARGED TO YOUR

CREDIT CARD. This amount will be

credited if the unit is subsequently

After the 90 days and within one year

•

Exchange your camcorder with a new or

refurbished unit, or repair your camcorder.

The option will be ours. Parts will be

provided at no charge, but you will be

responsible for the cost of labor required

for the repair.

How you get service:

received.

•

Call 1-800-283-6503 and have your unit’s

date of purchase and model/serial number

ready. The model/serial number

information is on the bottom of your

camcorder.

2. We will send you a replacement unit next

business day delivery in the continental

U.S.A.

3. You will receive an invoice packed with

the replacement product, but will not be

charged for the unit portion of the invoice

amount if we receive your unit within 14

days from the date you were provided the

RA number. Any labor and parts charges

not covered by our warranty will be

included and charged against your

account.

•

A representative will troubleshoot your

problem over the phone. If the

representative determines that you should

receive a replacement unit, you will be

provided with a Return Authorization (RA)

number and the location of a nearby

exchange point if one exists. No returns

will be accepted without the RA number.

4. Ship the unit back to us, excluding all

accessories, using the replacement unit’s

carton. Shipping instructions will be

included in the carton along with your RA

number which will allow you to easily

ship the unit back to us. Make sure you

To receive a replacement Camcorder

before you return yours:

If you are located near an exchange point:

1. We will send a replacement unit to the

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

insure your shipment in case of damage

or loss. Include with the shipment:

•

Check with your dealer or call 1-800-336-

1900 for the Authorized RCA Camcorder

Service Center nearest you.

•

Evidence of purchase date, such as a

bill of sale, to verify your unit’s

warranty eligibility.

•

Take your unit to the Authorized RCA

Camcorder Service Center of your choice.

•

A brief note describing your

camcorder’s problem.

Show the Authorized RCA Camcorder

Service Center representative evidence of

purchase date, such as a bill of sale.

Your name, address and phone number.

Return transportation, storage, handling, and

insurance costs are your sole responsibility.

We accept no liability in case of damage or loss.

•

Pick up your camcorder when repairs are

complete.

What your warranty does not cover:

To receive a replacement unit after we have

received your unit:

•

Adjustment of customer controls.

Damage from misuse or neglect.

1. Write the RA number on the outside of

the carton used to return the unit.

Make sure you insure your shipment in

case of damage or loss.

A unit that has been modified or

incorporated into other products or is used

for institutional or other commercial

purposes.

2. Carefully pack the unit, excluding all

accessories, using the original box and

packing material if possible.

•

Batteries for remote control and clock.

Cleaning of video/audio heads.

3. Include with the shipment:

Camcorders purchased or serviced outside

the U.S.A.

•

Evidence of purchase date, such as a

bill of sale, to verify your unit’s

warranty eligibility.

•

Return transportation, storage and handling

costs of your unit, including insurance for

loss or damage.

•

A brief note describing your camcorder

problem.

Acts of God, such as but not limited to

lightning damage.

Your name, address and phone number.

Return transportation, storage, handling, and

insurance costs are your responsibility. We

accept no liability in case of damage or loss.

Product Registration:

•

Please complete and mail the Product

Registration Card packed with your

camcorder. It will make it easier to contact

you should it ever be necessary. The return

of the card is not required for warranty

coverage.

4. The representative will advise the address

to mail a cashier’s check or money order

for payment if there are any out of

warranty labor or parts charges and you

elect not to use your credit card.

5. Upon receipt of your product, a new or

refurbished unit will be shipped to you

next business day delivery in the

continental U.S.A.

How State Law relates to warranty:

•

This warranty gives you specific legal

rights and you also may have other rights

that vary from state to state.

To have your Camcorder repaired by an

Authorized RCA Camcorder Service

Center:

If you purchased your camcorder outside

the United States:

•

This warranty does not apply. Contact your

dealer for warranty information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

General

LCD Monitor

Power requirement: 5.4 VDC

Power consumption:

Normal: 5.9 watts

Weight: 1.8 lbs. (800g)

2.5” measured diagonally LDC monitor

Camera Section

Image sensor: CCD solid-state type

(270,000 pixels)

Dimensions – Including Viewfinder:

8.6"(W) x 4.2"(H) x 4.2"(D)

Lens: F1.4-2.8 (f=4 to 64mm)

16:1 power zoom lens

Filter diameter: 46 mm

219.5 (W) x 106.5 (H) x 107.5 (D) mm

Video Recorder Section

Format: 8mm

Tripod Mount

One 1/4" x 20 threaded hole

Record/playback system:

Rotating 2-head, helical-scan system

One flying erase head

Video Signal: EIA Standard

NTSC color

AC Adapter/Charger

Power requirement: 100-240 V,

50/60 Hz.

Power consumption: 11 watts

Weight: .22 lbs. (100g)

Dimensions:

Viewfinder

.62 inch electronic B/W viewfinder

2.8"(W) x 1.3"(H) x 2.2"(D)

71 (W) x 34 (H) x 56 (D) mm

Information to User

This equipment has been tested and found to

comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC Rules.

These limits are designed to provide

•

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

•

Consult the dealer or an experienced radio/

TV technician for help.

Alterations or modifications carried out

without appropriate authorization may

invalidate the user’s FCC right to operate the

equipment.

This Class B digital apparatus meets all

requirements of the Canadian Interference

— Causing Equipment Regulations.

Cet appareil numérique de la classe B

respecte toutes les exigences du Réglement

sur le matériel brouilleur du Canada.

•

Reorient or relocate the receiving antenna.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Care and maintenance

camcorder 49

cleaning the camcorder viewfinder 48

storage 49

things to avoid 49

Care and storage

battery 14

A (audio) and V (video) jacks 38, 40

Accessories

included 3

optional 42

order form 45

cassette 19

Adapter/charger

Cassette care and storage 19

Cassette compartment 6, 9, 19, 21, 36

Cassettes 18

inserting 6

inserting and removing 19

Cell

charging battery 13

using 5, 11, 21

AE (automatic exposure) 24, 27

Assistance 1, 3, 53

Attach lens cap cord 4

Audio/video cable 38

install in remote 15

cautions 3

clock and remote 3

Checks, trouble 50

Cleaning the camcorder 48

Cleaning the camcorder’s lens 48

Cleaning the camcorder’s viewfinder 48

Cleaning the camcorder’s LCD monitor 48

Clock cell

B (bright) control 10

BATT (battery release) button 10, 12

Battery

attaching and removing 12

care and storage 14

charging 13

level indicator 14

holder 31

install 31

refreshing 13

remove 31

safety precautions 12

using 12, 21

Clock cell compartment 9

Clock cell indicator 31

Contents 1

Battery compartment 9, 10

Battery level indicator 24

Beep feature 6, 21, 27

Beep indicator 6, 9, 21, 27

BEEP ON or OFF indicator 21, 24, 27

BLANK button 10, 28

BLANK indicator 25, 28

Blank search feature 28

BRIGHT control 10, 23, 36

Copy tapes 39

COUNTER MEMORY button 16, 39

COUNTER RESET button 16

Customer assistance and service 53

DATE button 10, 24, 32, 33

Date/time display

correcting 32

in viewfinder or monitor 24

install and remove clock cell 31

record AUTO DATE 33

record the date 33

record the date and time 33

setting time and date 32

Cable TV installer note 41

CAM (camera) indicator

6, 9, 20, 21, 26, 39, 41

CAM (camera) mode 16, 17, 26, 28

Camcorder’s operating controls 9

Camera edit feature 26

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

FOCUSLOCK 25, 30

no cassette 25

PAUSE 8, 21, 25

REC 8, 21, 25

REW 25

shutter speed 24, 27

STOP 25

DC cable 5, 11, 13

DC in jack 5, 10, 11

Dew indicator 25

DISPLAY button 10, 16, 26, 27, 41

Displays

LCD monitor 24

status 25

viewfinder 24

TAPE 25

TAPE END 25, 28

time-remaining 25, 28

VCR 6, 8, 36, 37, 39, 41

zoom level 25, 29

Information to user 56

Inserting and removing cassettes 19

Install clock cell 31

Install remote’s cell 15

Iris 27

EJECT button 6, 10, 19, 20, 21, 36

Erase protection 18

Eyepiece, cleaning 48

Eyepiece focus control 7, 9, 20, 21, 22, 36

F (focus) control 10

FF indicator 25

LCD monitor 8, 9, 10, 12, 20, 21, 22, 26

LCD monitor, displays 24

LCD monitor, using 23

Lens 9

Lens cap 21

Lens, cleaning 48

F.FWD (fast forward) button

10, 16, 20, 21, 26, 27, 37

First time operation 3

Flying erase head 26

FOCUS LOCK button 10, 30, 32

Focus lock feature 30

Lens cover 20, 21

Limited warranty 54

FOCUSLOCK indicator 25, 30

Full auto mode feature 28

Memory-stop feature 34

Microphone 9, 27

Handstrap, adjust 4

Indicator

No cassette indicator 25

AUTO DATE 24

battery level 14, 24

beep 6, 21, 27

BEEP OFF 21, 24, 27

BEEP ON 24, 27

BLANK 25, 28

CAM 6, 26, 39

clock cell 31

OPEN button 5, 10, 11, 12, 23, 36

Operating controls 9, 10

Optional accessories 42

Order form, accessories 45

dew 25

FF 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Registration 2

Remote control

buttons 16

install cell 15

sensor 17

Remote sensor 9

Remove clock cell 31

REW (rewind) button

8, 10, 17, 20, 21, 26, 27, 37

REW indicator 25

RF jack 9, 40

PAUSE button 10, 16

PAUSE indicator 8, 21, 25

Pause, stop-action 37

PLAY button 8, 10, 17, 21, 36, 39, 41

Playback

features 37

first 8

viewfinder 36

Playback features

stop-action pause 37

time counter 34

visual searching 37

Playback on a TV without audio/video

inputs 40

Playback on TV (or VCR) with audio/video in

jacks 38

Plug adapter, optional 11

POWER switch

6, 8, 9, 14, 20, 21, 26, 34, 36, 37, 39, 41

Powering your camcorder

using adapter/charger 11

using battery 12

RF output adapter, optional 40, 41

Safety information 2

Safety precautions, battery 12

Safety tab 6, 18, 19

Sensor, remote 9, 17

SET button 20

Setting the time and date 32

Shoulder strap 9

attaching 4

rings 4, 9

Shutter speed indicators 24, 27

Shutter speeds 24, 27

Solving problems 50

SP speed 18

Problem solving 50

Product registration 2

Speaker 10

Specifications 56

Quick review feature 26

Start and stop recording 8

Status displays 25

STOP button

8, 10, 16, 17, 21, 34, 36, 37, 39, 41

STOP indicator 25

Stop-action pause 37

REC (record) button 17, 26

REC (record) mode 17

REC indicator 8, 21, 25

REC START/STOP button

8, 9, 20, 21, 39, 41

Record the date, date and time, or AUTO

DATE 33

Table of contents 1

Tape copying 39

Recording

TAPE END indicator 25, 28

TAPE indicator 25

making a 20

SP speed 18

Tape, inserting 6, 21

Tape time-remaining display 25, 28

Tape window 19

times 18

Recording tips 35

Refresh the battery 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Things to avoid 49

Thumb trigger 8, 9, 20, 21, 26, 39, 41

Time counter 34

Time-remaining indicator 28

Tips

recording 35

traveling 35

Traveling tips 35

Tripod, using 44

Trouble checks 50

Turn on the camcorder 6

Unpack the camcorder and accessories 3

VCR indicator 6, 8, 9, 36, 37, 39, 41

VCR mode 16, 17, 28

VCR/CAM button

6, 8, 9, 26, 36, 37, 39, 41

Video cassettes 18

Viewfinder 7, 8, 20, 21, 22, 26

cleaning 48

eyepiece focus control 22

playback 36

using 22

Visual searching 37

VOLUME control 10, 36

Warranty, limited 54

White balance 27

ZOOM buttons 17, 29

Zoom level indicator 25, 29

Zoom lever 9, 20, 21, 29, 32

Zooming 29

Download from Www.Somanuals.com. All Manuals Search And Download.

10330 N Meridian Street

Indianapolis, IN 46290

1997 Thomson Consumer Electronics, Inc.

Trademark(s) Registered

Marca(s) Registrada(s)

Printed in Japan

TOCOM 15242820

Download from Www.Somanuals.com. All Manuals Search And Download.

Q See Security Camera QT428 403 User Guide
Radio Shack Conference Phone 43 3908 User Guide
Radio Shack Weather Radio 120 0246 User Guide
Rolls DJ Equipment RPQ160b User Guide
Ryobi Saw BAND SAW User Guide
Samsung Printer ML 1630 User Guide
Samsung Printer SCX 5835 Series User Guide
Samsung Projection Television LN437W User Guide
Sears Garage Door Opener 13953915D User Guide
Sennheiser Headphones HD 410 User Guide