Product Registration..............Inside Front Cover
Safety Precautions...........................................1-3
Optional Accessories.......................................4-7
• Accessory Order Form ...................................5-6
Using an Optional Tripod..................................7
First-Time Operation....................................8-13
Remote Control ...........................................14-15
Powering Your Camcorder........................16-19
RCA Video Cassettes .......................................20
®
Video Camcorder
Model Pro807
Special Features
• Camera Edit.....................................................21
• Quick Review ..................................................21
• Flying Erase Head ...........................................21
• Earphone Jack..................................................21
• AUTO LOCK Switch .......................................21
• Tape Positioning..............................................21
• Microphone......................................................21
• Tally Light.......................................................21
Owner’s Manual
Recording Features
• Date and Time Display...............................22-23
• Electronic Viewfinder .....................................23
• Displays in Viewfinder ..............................24-25
• Power Zooming ...............................................25
• Focusing Your Camcorder ..............................26
• Preset Program Modes.....................................27
• Time Counter with Memory Stop....................28
Recording and Traveling Tips ........................29
Care and Maintenance.....................................30
Playback Features
• Viewfinder Playback .......................................31
• Playback on TV ( or VCR) Using
Antenna Connections................................32-33
• Playback on TV (or VCR) Using
AUDIO/VIDEO IN Jacks ..........................34-35
Trouble Checks ...........................................36-37
Design Specifications........................................38
Limited Warranty ............................................39
Index (Alphabetical) ...................................40-41
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions
Your video camcorder’s AC adapter/charger will operate on 100-240 volts AC, 50/60 Hz, and has a polarized
plug. Because one blade of the plug is wider than the other, the plug fits in the wall socket only one way.
Do not defeat the safety feature of this plug. If you need an extension, use a polarized cord.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
MISE EN GARDE: Pour prévenir les chocs électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la prise et pousser jusqú au fond.
CAUTION: To reduce the risk of electric shock, do not remove the cover or back. No user-serviceable
parts are inside. If you spill liquid on the camcorder or AC adapter/charger, disconnect the AC
adapter/charger’s power cord to prevent possible fire or shock hazard and consult authorized service
personnel. Moisture can damage internal parts. Refer all service to Authorized RCA Compact Camcorder
Servicenter personnel only.
Caution: Maintain electrical safety. Powerline-operated equipment or accessories connected to this unit
should bear the UL listing mark or CSA certification mark on the accessories themselves and should not have
been modified so as to defeat the safety features. This will help avoid any potential hazard from electric
shock or fire. If in doubt, contact qualified service personnel.
WARNING: To prevent fire or shock hazard, do not expose camcorder or AC adapter/charger to rain
or moisture.
Caution: Avoid operating your camcorder immediately after moving it from a cold location to a
warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before inserting a
video cassette. When moved from a cold area to a warm location, moisture may condense on the head
drum inside the machine. This moisture could cause the tape to stick to the headwheel and damage the
headwheel or tape.
CAUTION
MISE EN GARDE
RISK OF ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The symbol of a lightning flash within
a triangle is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure and which may be
of sufficient magnitude to constitute a
risk of electric shock.
An exclamation point within a triangle is
intended to alert the user to the presence
of important operating and maintenance
(service) instructions in the literature
accompanying the product.
FCC Warning: Any unauthorized changes or modifications to this equipment may void the user’s
authority to operate.
Caution: The unauthorized recording of television programs and other materials may infringe the
rights of others.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
In addition to the careful attention devoted to quality
standards in the manufacture of your video product,
safety is a major factor in the design of every instru-
ment. However, safety is your responsibility too.
These pages list important information that will help
to assure your enjoyment and proper use of a
camcorder, adapter/charger and accessory
equipment. Please read them carefully before
operating your video products.
against them, paying particular attention to
cords at plugs, convenience receptacles, and the
point where they exit from the video product.
8. Ventilation—Slots and openings in the video
products are provided for ventilation to ensure
reliable operation of the video product and to
protect them from overheating. These openings
must not be blocked or covered. The openings
should never be blocked by placing the video
product on a bed, sofa, rug, or other similar
surface. This video product should never be
placed near or over a radiator or heat register.
This video product should not be placed in a
built-in installation such as a bookcase or rack
unless proper ventilation is provided or the
video product manufacturer’s instructions have
been followed.
Installation
1. Read and Follow Instructions—All the safety
and operating instructions should be read before
the video product is operated. Follow all
operating instructions.
2. Retain Instructions—The safety and operating
instructions should be retained for future
reference.
3. Heed Warnings—Comply with all warnings on
the video product and in the operating
instructions.
9. Attachments—Do not use attachments unless
recommended by the video product
manufacturer as they may cause hazards.
4. Polarization—This video product is equipped
with a polarized alternating-current line plug (a
plug having one blade wider than the other). This
plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert
the plug fully into the outlet, try reversing the
plug. If the plug still fails to fit, contact your
electrician to replace your obsolete outlet. To
prevent electric shock, do not use this polarized
plug with an extension cord, receptacle, or other
outlet unless the blades can be fully inserted
without blade exposure. If you need an extension
cord, use one with a polarized plug.
5. Power Sources—This video product should be
operated only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supply to your home, consult
your video dealer or local power company. For
video products intended to operate from battery
power, or other sources, refer to the operating
instructions.
6. Overloading—Do not overload wall outlets or
extension cords as this can result in a risk of fire
or electric shock. Overloaded AC outlets,
extension cords, frayed power cords, damaged or
cracked wire insulation, and broken plugs are
dangerous. They may result in a shock or fire
hazard. Periodically examine the cord, and if its
appearance indicates damage or deteriorated
insulation, have it replaced by your service
technician.
Caution: Maintain electrical safety.
Powerline operated equipment or accessories
connected to this unit should bear the UL
listing mark or CSA certification mark on the
accessory itself and should not be modified so
as to defeat the safety features. This will help
avoid any potential hazard from electrical
shock or fire. If in doubt, contact qualified
service personnel.
10. Water and Moisture—Do not use this video
product near water—for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in
a wet basement, or near a swimming pool and
the like.
11. Accessories—Do not place this video product
on an unstable cart, stand, tripod, bracket, or
table. The video product may fall, causing
serious injury to a child or adult as well as
serious damage to the video product. Use this
video product only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer or sold with the video product.
Any mounting of the product should follow the
manufacturer’s instructions and use a mounting
accessory recommended by the manufacturer.
11A A video product and cart
combination should be
moved with care. Quick
stops, excessive force, and
uneven surfaces may cause
the video product and cart
combination to overturn.
7. Power-Cord Protection—Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFEGUARDS
(continued)
12. Outdoor Antenna Grounding—If an outside
antenna or cable system is connected to the
video product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Section 810 of the National
Electrical Code, ANSI/NFPA No. 70-1984
(Section 54 of Canadian Electrical Code, Part 1)
provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna-
discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection
to grounding electrodes, and requirements for
the grounding electrode. See example below.
16. Lightning—For added protection for this video
product during a lightning storm, or when it is
left unattended and unused for long periods of
time, unplug it from the wall outlet and
disconnect the antenna or cable system. This
will prevent damage to the video product due to
lightning and power line surges.
Service
17. Servicing—Do not attempt to service this video
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
18. Conditions Requiring Service—Unplug this
video product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions.
Example of Antenna Grounding
A.When the power-supply cord or plug is
damaged.
ANTENNA
LEAD IN
WIRE
B. If liquid has been spilled, or objects have
fallen into the video product.
GROUND CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
C. If the video product has been exposed to rain
or water.
D.If the video product does not operate
normally by following the operating
instructions. Adjust only those controls that
are covered by the operating instructions.
Improper adjustment of other controls may
result in damage and will often require
extensive work by a qualified technician to
restore the video product to its normal
operation.
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
ELECTRIC SERVICE
POWER SERVICE GROUNDING
EQUIPMENT
ELECTRODE SYSTEM
(NEC ART 250, PART H)
13. Power Lines—An outside antenna system
should not be located in the vicinity of overhead
power lines, other electric light or power
circuits, or where it can fall into such power
lines or circuits. When installing an outside
antenna system, extreme care should be taken to
keep from touching or approaching such power
lines or circuits as contact with them might be
fatal. Installing an outdoor antenna can be
hazardous and should be left to a professional
antenna installer.
E. If the video product has been dropped or the
case has been damaged.
F. When the video product exhibits a distinct
change in performance—this indicates a need
for service.
19. Replacement Parts—When replacement parts
are required, have the service technician verify
that the replacements he uses have the same
safety characteristics as the original parts. Use
of replacements specified by the video product
manufacturer can prevent fire, electric shock, or
other hazards.
Use
14. Cleaning—Unplug this video product from the
wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
20. Safety Check—Upon completion of any
service or repairs to this video product, ask the
service technician to perform safety checks
recommended by the manufacturer to determine
that the video product is in safe operating
condition.
15. Object and Liquid Entry—Never push objects
of any kind into this video product through
openings as they may touch dangerous voltage
points or “short-out” parts that could result in a
fire or electric shock. Never spill liquid of any
kind on the video product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
We invite you to take a look at some great ideas for
sparking creativity and adding to the fun of using
your 8mm camcorder. These pages have a selection
of accessories to help make your memorable
moments look and sound even better.
Rechargeable Batteries
These
rechargeable
nickel-
cadmium
batteries are
specifically
designed for
long life.
These accessories are designed to make the process
of recording and watching your videos more
enjoyable.
AV608
AV8MM
To order accessories, contact your local Dealer.
The AV608 can power your camcorder up to one
hour, and the AV8MM up to two hours (depending
on how much you use zoom and pause). Both can be
recharged with the AC adapter/charger that came with
your camcorder. Initial charging and recharging takes
approximately one hour for the AV608 or two hours
for the AV8MM.
If a dealer is not nearby, all accessories are available
through toll-free ordering or by using the order form
on page 5.
AC025A Soft Carrying Case
Custom compact soft
case designed
especially to provide
protection and utility
Audio/Video Cables
for your RCA 8mm
camcorder and most
accessories. Rugged
These cables are shielded
for connecting AUDIO and
VIDEO jacks. They have
RCA-type phono plugs on
each end.
fabric lined with soft non-abrasive material and
generous padding. Has three outside pockets with
storage for lens filters, adapters, batteries, and tapes.
AH069G (3-ft)
AH070G (5-ft)
DCC05 DC Car Cord Adapter/Charger
Monaural VCR Dubbing Cable
This DC car cord
adapter/charger enables
This is a double cable that
lets you connect the
you to operate your
camcorder from your
car, truck, or RV by
plugging the car cord
AUDIO and VIDEO jacks
of monaural components.
It can be used to connect
your camcorder to a TV
monitor (or VCR). The
cable is color coded and
directly into the vehicle’s cigarette lighter socket. It
will also charge the AV608 battery supplied with the
camcorder or the AV8MM long play battery. The
DCC05 is specially designed to convert power from
a 24-volt or 12-volt battery to a 6-volt output.
shielded with RCA-type
phono plugs on each end.
AH075G (6-ft)
193983 Cable Transformer
The 193983 is used to
Caution: Do not use any other RCA car cord with
this camcorder. It may damage the camcorder.
connect a standard 300-
ohm antenna twin-lead to a
standard round 75-ohm
connector on the RF output
adapter.
193983
All specifications and descriptions of accessories
are subject to change without notice.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories Accessory Order Form
VCC1000 Video Color Control
Center
Order Form for Pro807
Description
Part No. Price Qty. Total
Soft Camcorder Case
Super Lightweight Tripod
AC025A $ 59.95
AC035 $ 69.95
Gold-Tipped Audio/Video Cable (3-ft.) AH069G $ 5.99
Gold-Tipped Audio/Video Cable (5-ft.) AH070G $ 7.99
The VCC1000 is actually two
accessories in one. The color
control center allows you to
adjust the color intensity, tint,
white balance, and sharpness of
tapes being dubbed. This is
especially helpful when the
original tape was produced in
poor lighting conditions or poor
color settings. The second
feature, the character generator,
lets you create titles that can be
recorded on your tapes. This lets
you add a professional and/or
personal touch to your home
videos.
Gold-Tipped Dubbing Cable (6-ft.)
Rechargeable Battery
AH075G $ 10.99
AV608 $ 49.95
AV8MM $ 59.95
CRF800 $ 49.95
CPS800 $189.95
DCC05 $169.95
DCC100 $ 14.95
VCC1000 $349.90
VDC88 $ 79.95
Rechargeable Battery
RF Output Adapter
AC Adapter/Charger
DC Car Cord Adapter/Charger
DC Cable for Adapter/Charger
Video Control Center
Color Enhancement Light
Replacement Bulb (15 watt)
for VDC88
VDC090 $ 12.95
BP1000 $ 29.95
VDC085 $ 18.95
211026 $ 49.95
213003 $ 11.95
213004 $ 13.95
Extra Battery for VDC88
Charger for BP1000
VDC88 Color Enhancement
Light
Replacement Remote Control
RF Connecting Cable
Shoulder Strap
Prices are subject to change without notice.
This ultra compact 15-watt video
light is cordless, light in weight,
and includes a rechargeable
battery. It mounts on the top of
the camcorder and fits on a
standard accessory shoe. The
VDC88 provides excellent soft,
lush fill light. The VDC88 uses
one 15-watt (VDC090)
Total Merchandise ($10 Minimum Order). . . . . . . . . . $__________
Sales Tax. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$__________
We are required by law to collect the appropriate
sales tax for each individual state, county, and
locality to which the merchandise is being sent.
Shipping, Handling, and Insurance. . . . . . . . . . . . . . . .$
5.00
Total Amount Enclosed. . . . . . . . . . . . . . . . . . . . . . . $__________
Use VISA or MasterCard preferably. Money order
or check must be in U.S. currency only. No COD
or CASH.
replacement bulb. The
rechargeable battery BP1000 can
be charged with the VDC085
battery charger.
• All accessories are subject to availability.
• Where applicable, we will ship a superseding model.
Please complete other side also
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessory Order Form (continued)
o Maste Ca d by
To order accessories, contact your
local Dealer.
If a dealer is not nearby, you can also
follow the directions below to order by
telephone or direct-by-mail.
Charge your order on your VISA
or MasterCard by
filling in below
USE YOUR CREDIT CARD
®
United States Orders
IMPORTANT: Copy complete account number
from your VISA card
To place your order by phone, have your
Visa or MasterCard ready and call the
toll-free number listed below between
8AM and 8PM Eastern Standard Time.
Use this number only to place an
order for accessory items listed on this
order form.
My card expires:
s
r
r
TM
IMPORTANT: Copy complete account number
1 – 800 – 338 – 0376
from your MasterCard
Most times your order will be shipped
UPS within 72 hours of receipt. If ever
it is not possible to ship within 30 days,
we will notify you with an update on
your order and an option to cancel.
Copy Number
My card
expires:
above your
name on
MasterCard
To place your order by mail, detach and
mail the completed order form with
credit card information, money order, or
check in U.S. currency (made payable to
Thomson Consumer Electronics, Inc.) to
the following address:
AUTHORIZED SIGNATURE
Prices are subject to change without notice.
Print or type your name and
RCA Video Accessories
PO Box 8419
Ronks, PA 17573
PLEASE
address clearly. This will be your
mailing label.
For more information on these
accessories (or current prices), write
to the following address:
A complete and correct order will
save you days of waiting.
Video Accessories Customer Service
Thomson Consumer Electronics, Inc.
Distributor & Special Products
2000 Clements Bridge Rd
Deptford, NJ 08096-2088
Name:
Canadian Orders
Street:
For Canada inquiries, please call one of
these toll-free numbers for information
about accessories:
Apt:
English: 1 – 800 – 668 – 5518
French: 1 – 800 – 668 – 5507
City:
State:
Zip:
International Orders
This offer is valid only in the 50 United
States. For international orders, please
send your request for a price quotation
(not an order) to:
Please make sure that both sides of this form have
been filled out completely.
International Customer Service
Thomson Consumer Electronics, Inc.
Distributor & Special Products
2000 Clements Bridge Rd
• Allow 8 weeks for deliver.
• All accessories are subject to availability.
• Where applicable, we will ship a superseding model.
Deptford, NJ USA 08096-2088
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Optional Tripod
AC035 Super Lightweight Tripod
Using an Optional Tripod
Mounting the camcorder on a tripod, such as
AC035 will keep the camcorder steady and
produce excellent video results.
This tripod’s fluid-effect head provides smooth
camera pan and tilt. The quick-release mount makes
it easy to attach or remove the camcorder. The
grooved, tubular 3-section leg design folds down to
23-1/2" when not in use and weighs only 3-1/2 lbs.
Rubber feet allow for sure footing.
C
O
U
N
T
E
RM
E
M
R
E
S
.
D
A
T
E/TIM
E
A
D
J
.
P
U
LL
B
A
T
T
E
R
Y
F
.F
W
D
.
REW
FOCUS
PLAY
STOP
ON
OFF
MO
D
E S
E
L.
A
U
T
O LO
C
K
+
–
MA
N
U
A
L F
O
C
U
S
Caution: Before using a tripod, make sure it is stable enough to
hold the camcorder without falling over.
When attaching your camcorder to a tripod, be careful not to force
the tripod screw into the camcorder’s tripod mounting hole.
The tripod screw should not protrude into the camcorder more
than approximately three-eighth (3/8) inch. Forcing the screw
could damage the mounting hole on the bottom of the camcorder.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
Thank you for choosing an RCA camcorder.
You have selected a precision-engineered
camcorder designed to give you years of
performance and enjoyment.
If you should experience a problem, always refer
first to “Trouble Checks” on pages 36-37. Many
times a simple solution is all that is needed, and it
could save you a costly service call. If your
camcorder should require service during the
warranty period, refer to page 39 for a description of
what we will do and instructions on how to request
service.
Although your camcorder is very simple to use, it is
important that you read and carefully follow the
instructions in this manual until you are completely
familiar with the proper operating procedures.
1. Unpack the camcorder and accessories.
Make sure you remove all the accessories and
information papers that came packed with the
camcorder.
• Save the packing materials and box in case you
ever need to ship or store your camcorder.
• The items shown below are packed with your
camcorder. If any of the items are missing or
appear damaged, contact your RCA dealer
immediately.
C
O
U
N
T
E
RM
E
M
R
E
S
.
D
A
T
E/TIM
E
A
D
J
.
P
U
LL
WARNING:
NICKEL
CADMIUM
BATTERY
MUST BE
RECORD
STO
P
START
STO
P
+
-
REW
PLAY
F.FWD
+
SCE
NE SEARC
STILL
H
B
A
T
T
E
R
Y
–
F.FWD.
REW
FOCUS
PLAY
DISPLAY
C
O
UNTER
+
-
STOP
ON
OFF
RESE
T
MEMORY
MO
D
E S
E
L.
A
U
T
O LO
C
K
+
–
Rechargeable
6-Volt Battery
Stock No. AV608
DISPOSED OF
PROPERLY.
Remote
Control
MA
N
U
A
L F
O
C
U
S
Batteries
(size “AA”
1.5 volt)
Camcorder: Model Pro807
Remote Control
Stock No. 211026
R
E
F
R
E
S
H
C
H
A
R
G
E
P
O
W
E
R
DC Connecting Cord
Stock No. DCC100
RF Output Adapter
Stock No. CRF800
AC Adapter/Charger
Stock No. CPS800
RF Connecting Cable
Stock No. 213003
Caution: Lithium battery. Must be disposed
of properly.
Clock Battery:
3-Volt Micro
Lithium Cell (such
as Maxell No.
CR2025 available
from most local
drug stores and
camera shops)
Never handle punctured or leaking batteries.
May cause burns or personal injury.
Can cause death or injury if swallowed.
Keep out of hands of children. If swallowed,
consult a physician immediately for emergency
treatment.
Shoulder Strap
Stock No. 213004
8
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
2. Attach a power supply to the camcorder. 3. Remove the lens cap and attach it to
the lens cap holder on the camcorder.
Attach a power supply to the camcorder–either
the adapter/charger or charged battery.
Adapter/Charger
O
P
E
N
O
P
E
N
P
U
S
H
RE
START/
STO
C
P
Attach to
lens cap
holder.
Pull on tab to
remove the lens
cap.
RE
START/
STO
C
DC OUT
Jack
P
Pull on the tab on the side of the lens cap to
remove it. Then pull it straight, rotate it down,
and attach it to the lens cap holder on the side of
the camcorder.
DC IN 6.5V
Jack
DC Power
Cord
R
E
F
R
E
S
H
C
H
A
R
G
E
P
O
W
E
R
POWER
Indicator Jack
4. Attach the shoulder strap.
To AC 100-240V,
50/60 Hz
1.Unfasten one end of the shoulder strap from the
buckle. Make sure you leave the buckle on the
strap.
Connect one end of the DC power cord into the
DC OUT jack on the adapter/charger. Plug the
other end of the DC power cord into the DC IN
6.5V jack on the back of the camcorder. Plug the
adapter/charger’s plug into an operating outlet.
The POWER indicator on the adapter/charger will
light. Details are on page 16.
2.Thread one end of the shoulder strap through
one of the shoulder strap rings (located on the
top and bottom of the camcorder).
Charged Battery*
O
P
E
N
P
U
S
H
R
E
C
S
T
AR
T
/
S
T
O
P
Shoulder
strap
rings
3.Thread the strap back into the buckle. Pull on
the strap and make sure it is securely fastened
before using the shoulder strap to support the
camcorder.
Attach charged battery
to camcorder.
Make sure the camcorder’s POWER switch is in
the OFF position. Match the line on the battery
to the line on the camcorder. Hold the battery
flush against the camcorder and slide it in the
direction of the arrow until a click is heard.
Details are on page 17.
4.Repeat steps 1-3 for the other end of the
shoulder strap.
*The battery must be charged before it can be used the
first time.
(continued on next page)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
5. Adjust the hand strap.
8. Insert a cassette in the camcorder.
Adjust the hand strap so it is snug around your
hand when you place your thumb on the thumb
trigger and your middle and index fingers on the
power zoom buttons.
Cassette
OPEN Button
Compartment
Cover
EJECT Button
Cassette
Compartment
1.Slide the OPEN button and completely open
1.Unsnap the flap and open the adjustment strap
2.Put your hand in the hand strap.
3.Pull the adjustment strap to tighten.
4.Snap the flap closed.
the cassette compartment cover.
2.Press the EJECT button to open the cassette
compartment.
3.Insert a cassette only one way with the
record-protect (safety) tab facing up and the
tape window facing out.
6. Turn on the camcorder.
Because your camcorder is both a camera and a
VCR, it performs two completely separate groups
of functions. The position of the POWER
(CAM (camera) /OFF/PLAY) switch tells the
camcorder whether you want to record (CAM),
play back tapes (PLAY), or turn off the
camcorder’s power (OFF). Some of the controls
operate differently depending on the position of
the POWER switch.
4.Gently press on the side of the cassette
compartment where it is labeled PUSH (as
shown above) until it locks into place.
5.After the cassette compartment is fully
retracted, close the cassette compartment
cover.
Note: If the cassette you load into the cassette
compartment has been rewound in a different unit,
the cassette compartment may open again. Make
sure the cassette compartment is completely retracted
before closing the cassette compartment cover.
• Press and hold the small button on the POWER
switch while sliding it to the CAM position.
9. Set AUTO LOCK switch in the AUTO
7. Place the ON/POWER SAVE lever in
LOCK position.
the ON position.
The camcorder also has an ON/POWER SAVE
lever to conserve battery power when recording.
10. Pull out the electronic viewfinder and
adjust the eyepiece focus control for
your vision.
• During recording, place the ON/POWER SAVE
lever in the ON position. The camcorder will
not record unless this lever is in the ON
position.
• Pull the electronic viewfinder out into the
operating position.
• If the image in the viewfinder is blurry, adjust
the eyepiece focus control for your vision.
Details are on page 23.
• Place the ON/POWER SAVE lever in the
POWER SAVE position during recording
breaks. The camcorder will enter the “standby
mode”.
Important Note: The dew indicator
will appear in
the electronic viewfinder when there is excessive
moisture in the camcorder. Remove the cassette from
the camcorder and let it dry naturally.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
Electronic Viewfinder in Operating
Position (PULL out here )
POWER (CAM/OFF/PLAY) Switch
C
RES.
O
UNTE
R
ME
M
Tally Light
DATE/TIME
PULL
ADJ.
Eyepiece Focus
Control
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
+
REW (Rewind) Button
PLAY Button
–
MANUAL FOCUS
OPEN Button
AUTO LOCK
Switch
EJECT Button
(located under the
cassette compart-
ment cover)
STOP Button
Lens Cap
on Strap
O
P
E
N
PUSH
Earphone
Jack
REC
START/
STOP
ON/POWER
SAVE Lever
Power Supply
Thumb
Trigger
(Adapter/Charger
or Charger Battery)
11. Start and stop recording.
12. Play back what you have recorded.
Start and stop recording by pressing and
releasing the thumb trigger. You do not have to
hold the thumb trigger to record. The REC
indicator appears in the viewfinder when the
camcorder is recording.
Notes: The tally light flashes during record-pause
and goes off when the camcorder is recording or the ,
ON/POWER SAVE lever is placed in the POWER
SAVE position.
• Press the thumb trigger to stop recording.
• Place the POWER switch in the PLAY
position.
• Press the REW (rewind) button to rewind the
tape.
• Then press the PLAY button to play back the
tape in the electronic viewfinder.
• Press the STOP button when you are finished
playing back the tape.
If you do not record within five minutes, the
camcorder will automatically shut off to prevent
excessive tape wear. To resume recording press the
thumb trigger twice.
• Details on viewfinder playback are on
page 31.
Any material recorded on the tape will automatically
be erased if you record over it.
To monitor the audio being recorded, attach an
optional earphone to the earphone jack.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
13. Review all of the camcorder’s
operating controls.
The page number(s) where detailed information
on each control can be found are listed for your
convenience.
Eyepiece Focus Control
(pages 10-11, 23)
Power Zoom Buttons (W and T)
(page 25)
POWER (CAM (camera)/OFF/PLAY)
Switch (pages 10-11)
Accessory Shoe
COUNTER
MEM
RES.
DATE/TIME
ADJ.
Remote Control
Sensor (page 14)
PULL
Microphone
(page 21)
Electronic Viewfinder
(PULL here to extend)
(pages 10-11, 23-25, 31)
Tally Light
(pages 11, 15, 21)
BATTERY
F.FWD.
REW
BATTERY Eject Lever
(page 18)
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
+
F.FWD. (Fast Forward) Button
(pages 21, 31, 33, 35)
–
MANUAL FOCUS
REW (Rewind) Button
(pages 21, 31, 33, 35)
Clock Battery Compartment
(page 22)
Lens (page 30)
Output Jacks (Yellow Video,
DC, and White Audio)
(Located behind cover)
(pages 32, 34)
FOCUS ON/OFF
Button (pages 25, 26)
Also Still (ll ) Button
(pages 31, 33, 35)
PLAY Button
(pages 11, 24, 31, 33, 35)
AUTO LOCK Switch
(pages 10, 12, 21, 27)
MANUAL FOCUS + and –
Button (pages 24-25, 26)
STOP Button
(pages 11, 21, 31, 33, 35)
Also MODE SEL. (Select) Button
(pages 24, 27)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation (continued)
ADJ. (Adjust) Button
(pages 22-23)
DATE/TIME Button
(pages 22-23, 25)
Cassette
Compartment
Cover
(pages 10, 20)
COUNTER RES. (Reset) and
MEM (Memory) Buttons
(pages 24-25, 28)
OPEN Button
(page 10, 20)
O
PE
N
EJECT Button
(Located under the cassette
compartment cover)
(pages 10-11, 20)
Lens Cap
(page 9)
Lens Cap Holder
(page 9)
Cassette
Compartment
(pages 10, 20)
REC
START/
STOP
Earphone Jack ( )
(pages 21, 31)
Hand Strap
(page 10)
ON/POWER SAVE Lever
(pages 10-11)
Shoulder Strap
Attachment Rings
(page 9)
REC START/STOP Button
(Thumb Trigger)
(page 11)
Attach charged
battery here
(pages 9, 17-18)
DC IN 6.5 V Jack (Attach DC power cord here
for adapter/charger or optional DC car cord)
(pages 9, 16, 19)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Battery Installation
Location and Function of Remote Control
Buttons
The batteries supplied with your remote control are
packed separately. Install them as follows.
A brief description of the functions of the remote
control buttons is given here. Most of the remote
control buttons perform the same function as the
corresponding controls on your camcorder. You
can use whichever are more convenient at the
time.
1. Turn the remote control over and slide the battery
compartment cover off.
2. Insert the batteries so that their positive (+) ends
contact the positive terminals in the battery
compartment.
3. Replace the cover.
Notes: Never place anything heavy on top of the remote
control or lay it upside-down. This may accidentally
depress the buttons for a long time and discharge the
batteries.
RECORD
5
STOP
START
STOP
1
2
3
Replace the batteries when the camcorder fails to respond
to the remote control. Remove the batteries from the
remote control if it will not be used for a month or more.
This will prevent possible damage from battery leakage.
If leakage occurs, wipe up the liquid inside the
6
7
REW
–
PLAY
F.FWD
+
SCENE SEARCH
STILL
compartment and replace the batteries with new ones.
8
9
DISPLAY
COUNTER
Do not use new and used batteries together.
4
MEMORY
RESET
Different brands and types of batteries have different
voltages. Do not use different brands or types of batteries
together.
Remote Control Sensor
C
O
U
N
T
E
RM
E
M
R
E
S
.
D
A
T
E/TIM
E
A
D
J
.
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MO
D
E S
E
L.
A
U
T
O LO
C
K
+
–
MA
N
U
A
L F
O
C
U
S
The remote control operates the camcorder by
Note: An RCA VCR that is set to respond to the VCR 2
button on the VCR’s remote control may respond to
this remote control when it is used to operate the
camcorder.
infrared light, so it is protected from electrical and
sound interference. However, the remote control
must be aimed directly at the camcorder’s remote
control sensor. There cannot be any obstructions
between them. The remote control should operate
up to approximately 16 feet from the camcorder.
Replace the remote control batteries if the operation
distance decreases.
Note: The camcorder may not respond to the remote
control if the camcorder’s remote control sensor is
exposed to direct sunlight or strong artificial light.
(continued on the next page)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control (continued)
Location and Function of the Remote Control
5 STOP Button
Buttons (continued)
• Press this button when the camcorder’s POWER
switch is in the PLAY position to stop playback,
rewind, or fast forwarding.
1 RECORD START/STOP Button (Same as
Thumb Trigger on Camcorder)
• The STOP button has no effect when the
camcorder’s POWER switch is in the CAM
position. To stop recording, press the RECORD
START/STOP button 1 .
Press and release the RECORD START/STOP
button when the POWER switch is in the CAM
(camera) position to start and stop recording. The
tally light will light continuously during recording
when you start recording using this button on the
remote control.
6 PLAY Button
Press the PLAY button when the camcorder’s
POWER switch is in the PLAY position to begin
playback.
Notes: The camcorder’s ON/POWER SAVE lever must
be in the ON position for the camcorder to record.
If the camcorder is left in the record-pause mode
(POWER switch in the CAM position) for more than
five minutes, the camcorder’s power will turn off. To
begin recording again, press the RECORD
START/STOP button twice.
7 F.FWD (Fast Forward) Button
• Press the F.FWD button when the camcorder’s
POWER switch is in the PLAY position to fast
forward the tape.
2 REW (Rewind) Button
• During playback or fast-forward operation
(POWER switch in the PLAY position), press
and hold the F.FWD button to visually search
forward on the tape. Release the F.FWD button
to return to normal playback or fast-forward
operation.
• Press the REW button when the camcorder’s
POWER switch is in the PLAY position to
rewind the tape.
• During playback or rewind (POWER switch in
the PLAY position), press and hold the REW
button to visually search the tape in reverse.
Release the REW button to return to normal
playback or rewind.
8 STILL Button
• During playback, press the STILL button to
produce a stop-action picture. Press the STILL
button again to return to normal playback.
3 SCENE SEARCH + and – Buttons
When the camcorder’s POWER switch is in the
CAM position (record-pause mode), press one of
the SCENE SEARCH buttons to visually search
the tape.
• This button has the same function as the still
(
) button on the camcorder.
Note: Some picture noise is normal during stop-
action playback.
• Press and hold the SCENE SEARCH + button to
visually search forward on the tape. Release the
button to return to record-pause.
9 COUNTER (RESET and MEMORY) Buttons
These buttons have the same function as the
COUNTER RES. and COUNTER MEM buttons
on the camcorder. Details are on page 28.
• Press and hold the SCENE SEARCH – button to
visually search the tape in reverse. Release the
button to return to record-pause.
4 DISPLAY Button
Press the DISPLAY button when the camcorder is
connected to a TV to see the viewfinder’s
displays on the TV screen. Press the DISPLAY
button again to remove them. Details on
connecting a TV are on pages 32-35.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder directly from
standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be
used virtually anywhere in the world to power the camcorder or recharge the battery. You may
need a plug adapter in some countries. Consult your RCA dealer. Be sure to purchase the plug
adapter before traveling. The adapter can be hard to find in foreign countries.
O
P
E
N
REC
START/
STOP
DC OUT Jack
DC IN 6.5 V Jack
REFRESH
C
HARG
E
DC Power Cord
POWER
POWER Indicator
To AC 110-240V, 50/60 Hz
To Attach the Adapter/Charger
Using an optional plug adapter
1. Plug one end of the DC power cord into the
An optional plug adapter may be required in some
countries.
DC OUT jack on the adapter/charger.
2. Plug the other end of the DC power cord into the
DC IN 6.5V jack on the back of the camcorder.
3. Plug the adapter/charger’s plug into the nearest
AC outlet (100-240V, 50/60Hz).
Optional AC
Plug Adapter
AC 200-240V
4. If the adapter/charger is properly connected, its
1. Plug the adapter/charger’s plug into the AC plug
adapter.
POWER indicator will light.
To Remove the Adapter/Charger
2. Plug the AC plug adapter into an AC outlet.
1. Unplug the adapter/charger from the wall outlet.
2. Disconnect the DC power cord from the
camcorder and the adapter/charger.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Battery to Power Your
Camcorder
The battery must be charged before it can be used the
first time. Initial charging will take approximately
one hour. When fully charged, the battery should
supply about 45-60 minutes of operating time
(depending on how much you use zoom and pause,
auto focus, and record-pause).
When using the battery to power the camcorder,
place the ON/POWER SAVE lever in the POWER
SAVE position during recording breaks to conserve
the battery’s power. Place it back in the ON position
when you are ready to resume recording.
The adapter charger has a REFRESH button that
allows you to completely discharge the battery. The
nickel cadmium battery will provide longer operation
time if it is “refreshed” before charging. Refreshing
a battery will take approximately 3-1/2 hours. The
operation time of the battery may decrease if the
battery’s power has not been completely exhausted
before it is recharged. Refresh a partially discharged
battery before recharging it.
Note: The small marker switch on the top of the battery
is for use as a personal reminder to help you remember to
recharge the battery. It has no other function.
Marker Switch
To AC 100-240V, 50/60 Hz
Caution: When a battery is attached to
the adapter/ charger, do not turn them
upside down. The battery may fall off
and be damaged or cause injury.
REFRESH
CHARGE
POWER
REFRESH Button
CHARGE Indicator
POWER Indicator
Charging the Battery
If the DC cord is connected to the adapter/charger,
remove its plug.
indicator will stop flashing after the battery has
been discharged. Then, the POWER indicator will
light, and the battery will automatically recharge.
1. Plug the adapter/charger into the nearest AC outlet
(100-240V, 50/60Hz). The POWER indicator will
light.
Note: If the CHARGE indicator on the AC
2. Align the reference mark on the battery with the
line on the adapter/charger.
adapter/charger starts flashing rapidly, remove the
battery from the adapter/charger. Try attaching the
battery again. Make sure it is correctly attached.
3. Hold the battery flush against the adapter/charger
and slide it in the direction of the arrow until it
locks into place.
5. Remove the charged battery by sliding it off the
adapter/charger. Unplug the AC power cord from
the AC outlet.
4. Press the REFRESH button to discharge the
battery. After a few seconds the CHARGE
indicator will slowly flash. The CHARGE
6. Attach the charged battery to the camcorder as
shown on the next page.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Powering Your Camcorder (continued)
Attaching the Charged Battery to the Camcorder
Low Level Battery Warning
If the DC cord is attached to the camcorder, remove
it before attaching the battery.
The battery warning indicator ( ) will appear in
the viewfinder when the battery power is low.
Recharge the battery, or use the adapter/charger to
power the camcorder.
1. Align the reference line on the battery with the
line on the back of the camcorder.
2. Hold the battery flush against the camcorder and
slide it in the direction of the arrow.
Caution: When the battery reaches its empty level
while you are using it, the camcorder will shut off.
However, the battery should have enough reserve
power to eject the cassette when you press the
EJECT button. If the camcorder does not eject the
cassette when you press the EJECT button, do not
attempt to force the cassette compartment open.
This will damage the camcorder. Power your
camcorder with the adapter/charger, or recharge
the battery before attempting to eject the cassette.
3. Slide the camcorder’s POWER switch to the CAM
position, and place the ON/POWER SAVE lever in
the ON position.
Proper Care and Storage of Your Battery
The battery will provide better service and longer
performance if you charge it before use and store it at
normal room temperature.
BATTERY Eject
Lever
The nickel cadmium battery will provide better
service if it is used until it reaches the empty level
(camcorder automatically turns off) before
recharging. Use the refresh feature if the battery is
not completely discharged.
WARNING: NICKEL CADMIUM BATTERY MUST BE
DISPOSED OF PROPERLY.
The battery should be charged at a temperature of
41°F-95°F (5°C-35°C) to prevent damage.
Do not operate the battery at temperatures below
14°F (–10°C) or above 95°F (35°C). The battery
may be damaged if operated at temperatures above
122°F (50°C). Operation time will decrease at
extremely low temperatures.
Removing the Battery From the Camcorder
Slide and hold the BATTERY eject lever on the
camcorder while sliding the battery to the left and off
the camcorder.
When the battery is used the first time, the recording
time will be slightly shorter than normal. To receive
full operation time from the battery, refresh and
recharge the battery two or three times.
Battery Safety Precautions
Do not short the battery’s terminals.
Do not attempt to disassemble or modify the
After repeated chargings and use, the operation time
will gradually decrease. When operation time
becomes too short to be useful, it is time to replace
the battery.
battery. There are no user-serviceable parts inside.
Use the battery only with specified RCA
adapter/chargers and camcorders.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering Your Camcorder (continued)
Using the Optional RCA DCC05 Car Cord Adapter/Charger
The optional RCA DCC05 DC car cord
adapter/charger allows you to power your
camcorder from the cigarette lighter socket of a
car, truck, or RV. It converts 24- and 12-volts
to a 6-volt output. The DCC05 can also charge
the battery that came with your camcorder and
the AV8MM (long play) battery.
Cautions: The DCC05 is designed to be used
only with vehicles having negative ground
electrical systems.
Do not use any other RCA car cord with this
camcorder. Other RCA car cords may damage
your camcorder.
Consult the installation and operating
instructions enclosed with the DCC05 for
complete operating instructions.
Using the RCA DCC05 Car Cord Adapter/
Charger to Power the Camcorder
Using the RCA DCC05 Car Cord
Adapter/Charger to Charge the Battery
O
P
E
N
REC
START/
STOP
1. If the DC power cord is attached to the car cord
adapter/charger, remove it.
1. If the battery is attached to the camcorder or car
cord adapter/charger, remove it.
2. Attach the battery to the car cord adapter/charger
as shown.
2. Plug one end of the DC power cord into the DC
OUT jack on the car cord adapter/charger and
the other end into the DC IN 6.5 V jack on the
back of the camcorder.
3. Insert the plug on the DCC05 into the vehicle’s
cigarette lighter socket. If the car cord and battery
are properly attached, the POWER and CHARGE
indicators on the DCC05 will light.
3. Insert the plug on the DCC05 into the vehicle’s
cigarette lighter socket. If the car cord is
properly attached, the POWER indicator on the
DCC05 will light.
Note: Use the REFRESH feature on the adapter/charger
to maximize the life of your battery.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
RCA Video Cassettes
We recommend that RCA cassettes be used with
your camcorder. The tape in these cassettes is of
high-quality formulation. It has been manufactured
to our critical specifications for excellent
performance. Use of tape not meeting these
specifications could considerably reduce the
performance of your camcorder.
Inserting and Removing Cassettes
OPEN Button
Record-
Protect Tab
Tape
Window
EJECT Button
Use of poor quality tapes or tapes that have been
damaged or mishandled can contaminate the video
heads, resulting in a snowy picture or no picture at
all during playback. Because there is no control over
the type of tape purchased or rented by consumers,
head cleaning is not covered under warranty. It is
considered normal maintenance.
Press Here
to Close
Playing a new RCA tape for approximately 30
minutes will often satisfactorily clean the heads and
improve your picture.
Erase Protection–Record-Protect (Safety) Tab
You can use your video cassettes over and over
again. To erase a previous recording, just record
over it.
1. Attach a power supply to the camcorder.
B.
A.
2. Slide the OPEN button and completely open the
cassette compartment cover.
3. Press the EJECT button to open the cassette
compartment. Insert or remove the cassette.
8
Caution: Insert the cassette only one way
with the record-protect tab facing up and the
tape window facing out. The cassette should
slide easily in the compartment. Do not force
the cassette.
To Prevent
Erasure–Close
Record-Protect
Tab (Expose
Red)
To Record
Record-Protect
Tab
Again –Open
Record-Protect
Tab (Red
Disappears)
A.To prevent erasing a recording you want to keep,
close the cassette’s record-protect tab by sliding it
in the direction of the arrow until the red area is
completely visible.
4. Close the cassette compartment door. Gently
press on the area labeled PUSH as shown above.
5. After the cassette compartment is fully retracted,
close the cassette compartment cover.
B.To record again on the cassette, slide the record-
protect tab open in the direction of the arrow until
the red area disappears behind the cassette case.
Recording and Playback Speeds and Times
The camcorder records in standard speed (SP). The
chart in the next column shows the maximum SP
recording times for some popular 8mm cassettes.
Cassette
Recording Time
P6-15
P6-20
P6-45
P6-60
P6-90
P6-120
P6-150
15 Minutes
20 Minutes
45 Minutes
60 Minutes
90 Minutes
2 Hours
The camcorder can play back tapes in standard speed
(SP) or long play (LP) speed. The playback speed is
automatically selected by the camcorder. The LP
indicator appears in the electronic viewfinder when
the camcorder is playing back a tape recorded in the
LP speed.
2 1/2 Hours
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Features
Earphone Jack
(Located on
the side of the camcorder)
C
RES.
O
UNTE
R
ME
M
DATE/TIME
ADJ.
PULL
POWER Switch
Microphone
Tally Light
BATTERY
F.FWD.
REW
FOCUS
PLAY
REW (Rewind) Button
STOP
ON
OFF
MODE SEL.
AUTO LOCK
F.FWD. (Fast Forward) Button
+
–
AUTO LOCK Switch
MANUAL FOCUS
Camera Edit
The camera edit feature allows you to use the
AUTO LOCK Switch
When the AUTO LOCK switch is in the AUTO
F.FWD. (fast forward) and REW (rewind) buttons on LOCK position, the camcorder will automatically
the camcorder (or the SCENE SEARCH + and –
buttons on the remote control) to precisely position
the tape while the camcorder is in the record-pause
mode.
• Press and hold the REW (rewind) button on the
camcorder (or the SCENE SEARCH – button on
the remote control) to visually search the recorded
tape in reverse.
• Press and hold the F.FWD. (fast forward) button
on the camcorder (or the SCENE SEARCH +
button on the remote control) to visually search
forward on the recorded tape.
control the focus and other recording features.
When you press the thumb trigger to start recording,
the REC and PAUSE indicators will briefly appear
twice their normal size in the viewfinder to alert you
that the AUTO LOCK switch is in the AUTO LOCK
position. Details are on pages 26-27.
Note: When the AUTO LOCK switch is in the AUTO
LOCK position, you cannot manually control the focus or
preset program modes.
Tape Positioning
When the POWER switch is in the PLAY position
and the camcorder is stopped, you can quickly fast-
forward or rewind the tape.
• Press the F.FWD. (fast-forward) button to fast-
forward the tape. Press the STOP button to stop
fast-forwarding.
When you release the buttons, the camcorder will
return to the record-pause mode at that point on the
tape.
Quick Review
• Press the REW (rewind) button to rewind the tape
to the beginning. Press the STOP button to stop
rewinding.
When the camcorder is in the record-pause mode,
press and release the REW button to review the last
few seconds of recorded material in the viewfinder.
The camcorder will return to the record-pause mode.
Microphone
Note: Do not hold the REW button, or the camcorder will
go into camera edit.
The microphone picks up the sound during a
recording. It is more sensitive to sounds coming
from the direction the lens is pointed.
Flying Erase Head
Tally Light
A separate erase head is mounted on the spinning
headwheel (hence the term “flying”).
The tally light on the front of the camcorder flashes
when the camcorder is in the record-pause mode.
• During recording, the tally light will turn off if you
start recording with the thumb trigger on the
camcorder or place the ON/POWER SAVE lever in
the POWER SAVE position.
• During recording, the tally light will light
continuously if you start recording with the
RECORD START/STOP button on the remote
control.
This allows you to make clean edits without the
“glitches” or “rainbow noise” that may occur at the
beginning and end of each recording.
Earphone Jack
Plug an optional earphone into this jack to privately
listen while recording or playing back a tape.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display
Installing the Battery for Time and Date
Display
Setting the Time and Date Display in the
Viewfinder
The time and date (or only the date) can be recorded
on your tape. Whenever one of the displays appear in
the viewfinder, it will be recorded on the tape. You
can choose to record only the date, both the date and
time, or neither.
C
RE
O
S.
U
N
T
E
R
ME
M
D
A
T
E/TIME
A
D
J.
PULL
ADJ. (Adjust)
Button
DATE/TIME
Button
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
+
–
C
RE
O
S.
U
N
T
E
R
ME
M
MANUAL FOCUS
D
A
T
E/TIME
A
D
J.
PULL
Battery
Compartment
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
Battery Tray
MODE SEL.
AUTO LO
C
K
+
–
MANUAL FOCUS
Caution: Lithium battery. Must be disposed of
properly.
Never handle punctured or leaking batteries. May
cause burns or personal injury.
1. Install the clock battery as described in the
previous column.
Can cause death or injury if swallowed.
Keep out of the hands of children. If swallowed,
consult a physician immediately for emergency
treatment.
2. Attach a power supply to the camcorder. Press
and hold the small button on the POWER switch
while you slide it in the CAM (camera) position.
Place the ON/POWER SAVE lever in the ON
position.
Never use metallic tweezers to hold the battery, and
never short circuit the + and – sides of the battery.
3. Use a straightened paper clip or pen to press and
hold the ADJ. (adjust) button for about one
second. The reset date (1. 1. 1992) and time
(AM 12:00:00) will appear in the viewfinder.
1. Locate the clock battery compartment on the
bottom side of the camcorder.
2. Pull the battery tray out from the battery
compartment.
4. The month will be flashing. Repeatedly press the
DATE/TIME button until the correct month
appears
3. Insert the clock battery with the “+” terminal
facing up as illustrated above.
4. Replace the battery tray in the camcorder.
Display in Viewfinder
Notes: Under normal conditions, the lithium battery
should last about one year. When the battery is expired the
date display will show “88:88”. After the lithium battery
has been replaced, the date and time will need to be reset.
Hours and
AM or PM
Minutes
Seconds
AM 12:00:00
1. 1.1992
Month
Day
Year
(continued on the next page)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Date and Time Display (continued)
Recording Date and TIme (or Date) on Your Tape
If you see the date and time (or date) display in the
viewfinder while you are recording, it will be
recorded on your tape. If you do not want it
recorded, press the DATE/TIME button until the
displays are removed from the viewfinder.
5. Then, press the ADJ. button. The flashing cursor
will move to the next part of the display.
6. Repeat steps 4 and 5 until you have entered the
correct month, day, year, hour including AM or
PM, and minute.
7. After setting the minutes, press the ADJ. button to
start the seconds. The seconds counter will start
with “00”.
Press
DATE/TIME
Button
To Display in Viewfinder
and Record on the Tape
Notes: To correct the date or time after the clock has been
started, repeat steps 3-7.
Press Once
Press Again
Press Again
Date Only
If “88:88” appears instead of the date display, the lithium
clock battery is expired. Replace the battery and reset the
time and date.
Date and Time
Neither Date nor Time
Electronic Viewfinder
Tilt Adjustment
The camcorder’s electronic viewfinder (EVF) is a
miniature black-and-white monitor that displays the
picture seen by the camcorder when recording. The
viewfinder can also be used for viewing the tape
during playback.
For convenient viewing, the viewfinder can be
raised 90°.
Caution: Do not
force the
viewfinder to
Electronic Viewfinder in Operating Position
(PULL here to extend viewfinder.)
rotate completely
around. This will
C
RE
O
S
U
.
N
T
E
RM
E
M
D
A
T
E/TIM
E
P
U
LL
A
D
J
.
C
RE
O
S
U
.
N
T
E
RME
M
D
A
T
E/TIME
damage the
A
D
J.
PULL
viewfinder and/or
the camcorder.
B
A
T
T
E
R
Y
Eyepiece Focus
Control
F.F D.
W
RE
W
FO US
C
PLAY
STO
P
O
O
N
FF
MO
D
E S
E
L.
A
U
T
O LO
C
K
+
–
MA
N
U
A
L F
O
C
U
S
Cleaning the Viewfinder
Caution: When carrying the camcorder with the
shoulder strap, rotate the EVF down. This helps
prevent possible damage to the viewfinder from
bumping against your body as you move.
You may occasionally want to clean the
viewfinder. Follow the steps below.
Eyepiece Focus Control
The eyepiece focus control lets you set the focus of
the viewfinder for your personal vision. If you wear
eyeglasses, you can probably operate the camcorder
without them.
1
2
3
1. Fully extend the viewfinder, and then slightly
push it back.
It’s easiest to set the correct focus by focusing on
one of the viewfinder’s on-screen displays (such as
the date). Pull the viewfinder out into operating
position. Look through the viewfinder and adjust
the eyepiece focus control for your vision.
The eyepiece focus control does not affect the focus
of the picture actually recorded by the camcorder.
2. Rotate the viewfinder in the counter-clockwise
direction to remove the eyecup piece.
3. Use an optional air blower available from most
camera stores to clean the viewfinder.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays in Viewfinder
1
LP Display
6
Time Counter with
Memory Stop
2
3
Status Displays
REC LP M 1:00:00
MF
Preset Program
Mode Indicators
(Sports, Auto
7
Manual Focus
(MF,+, and –)
Indicators
High-Speed
Shutter, Close-
up, Low- Light,
and Flickerless)
8
Cassette
Indicator
4
5
Battery Warning
Dew, TAPE, and
TAPE END
Indicators
AM 10:30:15
1. 1.1992
9
Time and Date
Display
The camcorder has several displays in the electronic
viewfinder that tell what the camcorder is doing, and
aid in the ease of operation.
camcorder’s preset program modes (
, or ). The indicator for the
mode selected will appear in the viewfinder.
,
,
,
,
This indicator will not be recorded on the tape
when it appears in the viewfinder. No
indicator appears when the auto mode is
selected. Details are on page 27.
1
LP Indicator
The LP indicator appears when you are playing
back a tape that was recorded at the LP speed.
2 Status Displays
One of the following displays will appear in the
viewfinder to let you know what the camcorder
is doing. These displays are not recorded on the
tape when they appear in the viewfinder.
Battery Warning
The battery warning indicator appears when it
is time to recharge the battery pack.
4
5 Dew, TAPE and TAPE END Indicators
• REC appears when the camcorder is recording.
• The dew indicator appears when
excessive moisture has entered the
camcorder or cassette. The camcorder’s
buttons will not operate except to eject the
cassette. Press the EJECT button and
remove the cassette from the camcorder.
Place the camcorder in a warm, dry area
until the indicator disappears
• PAUSE flashes when the camcorder is in the
record-pause mode.
• FF appears when the tape is fast forwarding,
and REW appears when the tape is rewinding.
• STOP appears when the camcorder is stopped
during playback.
• PLAY appears when the camcorder is playing
back a tape.
(approximately one hour). When the
indicator no longer appears in the
viewfinder, the camcorder will operate.
Note: When you start or stop recording, a larger
REC or PAUSE indicator will briefly flash below the
status display area to let you know that the AUTO
LOCK switch is in the AUTO LOCK position.
• TAPE appears in the viewfinder when there
is approximately five minutes of recording
time left on the tape.
Preset Program Mode Indicators (Sports,
Auto High-Speed Shutter, Close-up, Low-
Light, and Flickerless)
Slide the AUTO LOCK switch out of the AUTO
LOCK position, and then repeatedly press the
MODE SEL. (select) button to select one of the
3
• TAPE END appears in the viewfinder
during recording when the end of the tape is
reached.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Displays (continued)
Power Zooming
6
Time Counter with Memory Stop
• Press the COUNTER RES. (reset) button to
reset the counter to “0:00:00” when you start
recording or playing back a tape.
Power Zoom Buttons
T=Telephoto
W=Wide Angle
• Press the COUNTER MEM (memory) button to
turn on the time counter’s memory-stop feature.
An M appears in front of the time counter
display. Press the COUNTER MEM button
again to remove the M and turn off the
memory-stop feature.
C
RE
O
S
U
.
N
T
E
RME
M
D
A
T
E/TIME
A
D
J.
PULL
B
A
T
T
E
R
Y
F.FWD.
RE
W
FOCUS
PLAY
STO
P
ON
O
FF
• These displays will not be recorded on the tape
when they appear.
MODE SEL.
AUTO LO
C
K
+
–
MANUAL FO US
C
• Details are on page 28.
7
Manual Focus (MF, MF+, and MF–) Indicator
Slide the AUTO LOCK switch to the left (out of
the AUTO LOCK position). Then press the
FOCUS ON/OFF button to turn off auto focus
and focus manually.
• The MF indicator will appear in the viewfinder
during manual focus.
• Focus manually using the MANUAL FOCUS
+/– button.
• During manual focus, MF+ or MF– will appear
in the viewfinder when using the MANUAL
FOCUS –/+ button.
• This display will not be recorded on the tape
when it appears.
• Press the FOCUS ON/OFF button again to
return to auto focus. No indicator appears
when using auto focus.
The 8:1 motorized zoom lens allows you to
zoom in and out for close-ups or wide-angle
shots just by pressing one of the power zoom
buttons.
The zoom buttons are easily controlled by your
index and middle fingers when you hold the
camcorder through the handstrap.
• Press the button labeled “T” to move the lens
in the telephoto (close-up) direction.
• Press the button labeled “W” to move the lens
in the wide-angle direction.
Notes: Image vibration is more noticeable when
zooming in to film close-up shots. If possible use a
tripod or make sure that the camcorder is kept steady.
When the camcorder’s CAM/OFF/PLAY switch is set
to the OFF position, the zoom ratio will
automatically return to the full wide-angle position.
8
9
Cassette Indicator
This indicator appears if there is no cassette in
the camcorder, or if you try to record on a
cassette that has its record-protect tab closed. It
also appears if there is moisture in the cassette.
When you place the ON/POWER SAVE lever in the
POWER SAVE position and then back in the ON
position, the zoom ratio will remain the same as
before you put it in the POWER SAVE position.
Time and Date Display
After the time and date have been set, press the
DATE/TIME button to display the time and date
(or date) in the viewfinder. The time and date
display only appears when the camcorder is
recording or in the record-pause mode (POWER
switch in the CAM position).
• This display will be recorded on the tape
whenever it appears in the viewfinder.
• Repeatedly press the DATE/TIME button to
remove this display from the viewfinder.
• “88:88” appears instead of the time and date if
the time and date have not been set. It also
appears when the clock battery is not installed
correctly or it needs to be replaced.
• Details are on pages 22-23.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Focusing Your Camcorder
C
O
U
N
T
E
R
ME
M
R
E
S.
D
A
T
E/TIME
A
D
J.
PULL
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
+
–
MANUAL FOCUS
AUTO LOCK
Switch
MANUAL FOCUS + and –
Button
FOCUS ON/OFF
Button
Auto Focus
If you want the camcorder to focus for you
automatically, set the AUTO LOCK switch to the
Manual Focus
Under certain conditions, such as those listed, you
may need to focus manually.
AUTO LOCK position.
• When filming two subjects–one nearby and one
distant.
• When filming subjects in very low light.
• When filming a horizontally striped subject.
Notes: The camcorder will automatically focus on any
subject at a distance of three feet or more from the lens.
When a subject is closer than three feet, press the power
zoom button “W” to change to a wide-angle position
where the subject will be in focus.
• When filming subjects with little or no contrast in
the picture.
To focus manually.
When zooming in on a distant subject from the wide-
angle position, auto focus may not function properly due
to the instability of the image. Let auto focus adjust for
the full zoomed-in position, and then use a tripod for
stable images. The subject will then stay in focus while
using the power zoom buttons.
1. Slide the AUTO LOCK switch to the left (out of
the AUTO LOCK position).
2. Press the power zoom button labeled “T” and
zoom in on the subject.
3. Press the FOCUS ON/OFF button to select
manual focus. MF will appear in the viewfinder.
4. Adjust the focus by pressing the + or – side of the
MANUAL FOCUS +/– button.
• MF+ will appear in the viewfinder when
focusing in the + direction.
• MF– will appear in the viewfinder when
focusing in the – direction.
5. Use the power zoom buttons to select desired
zooming range.
Note: When the CAM/OFF/PLAY switch is set to OFF,
the focus will reset to auto focus when power is restored.
Manual focus will remain selected when you place the
ON/POWER SAVE lever in the POWER SAVE position
and then restore power by returning it to the ON position.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Program Modes
The camcorder has several preset program modes
which allow you to select a mode that fits your
particular recording situation. The camcorder will
automatically set shutter speed, white balance, and
iris. Manual or auto-focus can be used during any of
the preset program modes. To select one of the
preset program modes, follow the steps below.
1. Place the camcorder in the record-pause mode.
2. Slide the AUTO LOCK switch to the left (out of
the AUTO LOCK position).
Display in
Viewfinder with the
Sports mode selected
C
RE
O
S.
U
N
T
E
RME
M
D
A
T
E/TIME
A
D
J.
PULL
3. Repeatedly press the MODE SEL. (select) button
to select the preset program mode that best fits
your recording conditions. See the chart below to
determine which mode to use.
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LO
CK
+
–
Notes: If you want the camcorder to remember the preset
program mode and settings you selected during recording
breaks, place the ON/POWER SAVE lever in the POWER
SAVE position. The camcorder will automatically return
the settings to the auto mode if the power is turned off
using the POWER button.
MANUAL FO US
C
MODE SEL. (Select) Button
AUTO LOCK Switch
Auto focus will automatically reset whenever you select a
new preset program mode.
Mode
Shutter Speed
Indicator Auto-Focus Area
Recording Conditions
1/60 second.
None
Use under normal conditions.
Auto mode
Sports
Normal
1/60 ~ 1/250 second.
(depending on
brightness)
For filming sporting events, football games, etc.
• Colors may change if this mode is used
indoors with fluorescent lighting.
Center Frame Area
Only
(9 feet and farther)
For capturing fast movements such as a golf
swing, tennis swing, etc.
• Colors may change if this mode is used
indoors with fluorescent lighting.
Auto high
speed shutter
1/250 ~ 1/10,000
second (depending
on brightness)
Normal
1/60 second
For filming subjects, such as flowers or insects,
at a short distance.
Close-up
2/5 inch~78 inches
• This mode automatically sets the zoom to the
wide-angle position and the focus to about 2
inches from the lens. The focus can then be
adjusted on any subject in a range of 2/5 inch
to 78 inches from the lens.
For best results when filming indoors, under
low light conditions.
• If the camcorder makes too many focus
adjustments, this may indicate that the subject
is too bright. In this case select the auto mode
shown above or use manual focus.
Low Light
Flickerless
Normal
Normal
1/60 second
When recording in a foreign country under
fluorescent lighting that uses 50 Hz. electric
current (some parts of Europe and Asia).
1/100 second
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Time Counter with Memory Stop
COUNTER MEM
(Memory) Button
COUNTER RES.
(Reset) Button
RECORD
START
STOP
STOP
C
O
U
N
T
E
R
ME
M
R
E
S.
D
A
T
E/TIME
RE
W
PLAY
F.FWD
+
A
D
J.
PULL
SC
ENE SEARC
H
–
STILL
DISPLAY
C
O
UNTE
R
RESET
MEMORY
COUNTER
RESET
Button
COUNTER
MEMORY
Button
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
+
–
MANUAL FOCUS
2. Locate the place on the tape you want to return to
and press the COUNTER RES. (reset) button to
set the time counter to “M 0:00:00”.
Time Counter
The time counter display shows the actual time
elapsed when recording a program or playing back a
segment of a pre-recorded tape.
3. Continue to record or play the tape. When you
want to return to the place you marked, press the
thumb trigger to stop recording or the STOP
button to stop playing back the tape.
The time counter also helps you quickly locate the
end of recorded segments. Note the time counter
reading when you are finished recording or playing
back a tape. For example, you recorded a 10-minute
segment. Later, if you want to locate the end of your
recording, you can insert the cassette and fast-
forward the tape until the time counter reads “0:10:00”.
4. Make sure the CAM/OFF/PLAY switch is in the
PLAY position, and then press the REW (rewind)
button. The tape will rewind to the time counter
reading of “M 0:00:00”.
Before you start to record or playback a tape, press
the COUNTER RES. (reset) button to set the counter
to “0:00:00”.
Notes for Memory Stop: The corresponding buttons on
the remote control can be used to operate the camcorder.
Memory Stop Feature
The memory-stop feature helps you locate a certain
point on the tape. This is useful if you want to
review a section immediately after recording or
return to the same place on the tape several times
during playback. When memory stop is turned on,
the tape will stop automatically during rewind or fast
forward when the time counter reaches “M 0:00:00”.
Whenever the time counter is displayed, you can reset it
to 0:00:00 by pressing the COUNTER RES. button.
If you rewind the tape farther back than a counter reading
of “0:00:00”, a minus will appear in front of the time
counter display.
Whenever memory stop is turned on, the camcorder will
stop rewinding or fast forwarding when the counter
reaches “M 0:00:00”. To continue rewinding or fast
forwarding, press REW or F.FWD. again.
1. Press the COUNTER MEM (memory) button to
turn on the memory stop feature. An “M” appears
in front of the time counter in the viewfinder.
There may be a small difference between the actual
length of the tape and the counter reading.
The memory stop feature can be turned on at any time by
pressing the COUNTER MEM. button. Press the
COUNTER MEM. button again to turn memory stop off
and remove the M in front of the time counter.
M 0:00:00
Time Counter
with Memory-
Stop Feature
Turned on
Seconds
Minutes
Hours
If the tape does not stop at the exact memory location, use
the REW and F.FWD buttons.
Display in Viewfinder
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Camcorder Recording Tips
Recording Tips
Holding Your Camcorder
• Practice recording under a variety of lighting
conditions. This will help you respond quickly
whenever you see a scene you want to record.
• Hold the camcorder horizontally. Keep your feet
slightly apart and your upper arms close to your
body.
• When using manual focus, it is easier to make
professional looking videos if you check the focus
before you start recording. Use your camcorder’s
zoom to help you focus manually. Before you start
recording, zoom in on your subject and adjust the
focus until you see a clear image in the viewfinder.
Then zoom back to where you want to record. If
the subject-to-camcorder distance does not change,
the subject will remain in sharp focus over the
entire zoom range.
• When possible rest your elbows on a table or other
stable surface to help keep the camcorder steady.
• If you want to film at different angles, you may
raise the viewfinder 90˚.
• Standing against a wall may give your recordings
more stability.
• Use an optional tripod for stable images.
Traveling Tips
• Do not move the camcorder rapidly from side-to-
side while recording. A steady, gradual “pan”
avoids blurring and “jitter”.
• Write down your camcorder’s serial number and
keep it separate from the camcorder when
traveling. If your camcorder is lost or stolen, you
will be able to identify it.
• Use the viewfinder to make sure the camcorder is
level while recording or your scenes will appear
“tilted”.
• Make sure you have any plug adapters that you
may need before taking your camcorder to other
countries. Consult your RCA dealer for advice.
• Try to make sure indoor scenes are well-lit. This
improves picture quality and color reproduction.
• Use extra care to avoid damage to your camcorder
and accessories when operating them at a beach or
pool. Spray, sand, and dust should be avoided. If
your lens has been exposed to the elements, clean
it only with proper lens cleaning supplies.
• Do not bump or tap the camcorder’s microphone
while recording because this sound will be
recorded.
• Be aware of video and audio backgrounds.
Background details barely noticed while you are
taping may show up as visual “clutter” on your
recording. Background noises (especially TV sets,
radios, household appliances, traffic sounds, etc.)
can detract from the sound you want to record.
• Carry your camcorder in a carrying case when
traveling. See page 4 for a case especially
designed for this camcorder. An ordinary suitcase
or carry bag does not offer the protection your
camcorder needs. Treat your camcorder as carry-
on luggage to protect it from rough handling.
• Avoid long “still” shots of landmarks and scenic
attractions. Recordings are more interesting if they
include people and details. “Local color” will give
travel videos lasting appeal. Consider recording a
familiar or landmark scene from an unfamiliar
vantage point for added interest. Remember to
check the lighting before starting to record.
• Include close-up shots of individuals when taping
family outings or group functions.
• Make a video recording of your home and contents
to store in a safe place in case of fire or theft.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Maintenance
Camcorder Care and Storage
• Keep dust and grit from entering the camcorder’s
cassette door. Dust and grit are abrasive and will
cause excessive wear both to the camcorder’s
recording/playback heads and cassettes.
cleaning solution designed for use on camera lens.
Improper cleaning may scratch the lens.
• Before handling your camcorder, make sure your
hands and face are free from any chemical
products such as suntan lotion, as it may damage
the finish.
• We recommend RCA video cassettes be used with
this camcorder. These cassettes have been
manufactured to our critical specifications. Use of
cassettes not meeting these specifications may
reduce the camcorder’s performance or
• The camcorder can be damaged by improper
storage or handling. Do not subject the camcorder
to swinging, shaking, or dropping.
contaminate the heads resulting in a snowy picture
or no picture during playback.
• Do not store the camcorder in temperatures below
-22°F (-30°C) or above 149°F (65°C).
• Always replace the lens cap on the lens when the
camcorder is not in use.
• When the camcorder is not in use, always remove
the cassette and AC adapter/charger or battery.
• Do not touch the lens with your fingers. The oil
from your skin can damage the lens. Always use
lens-cleaning tissue and commercially prepared
• Retain the original carton for future storage or
shipping purposes.
Cassette Care and Storage
• Do not touch or cover the small holes in the
cassette or use cassettes with damaged or
spliced tape.
• When you are finished with a cassette, rewind it,
and remove it from the camcorder. Label your
cassettes before storing them.
• Keep dust from entering the cassette
compartment. All dust is abrasive and will
cause excessive wear on the tape and the
camcorder’s recording or playback heads.
• When you are finished recording, close the
cassette’s record-protect (safety) tab to prevent
accidental erasure.
• Store cassettes vertically in their protective boxes
at normal room temperatures. Do not leave your
camcorder or cassettes in a car or outdoors for an
extended period. Excessive heat or cold may
damage your cassettes.
• Keep the cassette away from strong magnetic
fields such as electric motors and other devices.
• Do not use a cassette if it has been damaged or
exposed to moisture. The tape may jam and
damage your camcorder.
Things to Avoid
• Do not attempt to disassemble your camcorder.
There are no user-serviceable parts inside.
• Do not operate the camcorder for extended periods
in temperatures below 40°F (4°C) or above 95°F (35°C).
• Do not expose the camcorder or adapter/charger to
rain or moisture. If either component becomes
wet, turn off the power and take the unit to an
Authorized RCA Compact Camcorder Servicenter.
• Avoid operating your camcorder immediately after
moving it from a cold location to a warm location.
Give the camcorder 1-1/2 to 2 hours to reach a
stable temperature before inserting a cassette.
When the camcorder is moved from cold to warm,
moisture may cause the tape to stick to the
• Never attempt to force open the cassette door. If
the battery reaches its empty level during
recording, the camcorder will shut off, but the
battery should have enough reserve power to eject
the cassette. If the camcorder does not eject the
cassette, power your camcorder with the
headwheel and damage the headwheel or tape.
• Do not aim your camcorder at the sun or other
bright objects.
• Do not leave your camcorder in direct sunlight.
Doing so could permanently damage the
camcorder’s internal parts.
adapter/charger or recharge the battery.
• Do not use an adapter/charger or batteries other
than the ones specified. Use of the wrong
accessories may cause damage to the camcorder.
• Do not operate the camcorder in extremely humid
environments.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewfinder Playback
EJECT Button (Located under
cassette compartment cover)
Earphone Jack (Located on side)
POWER (CAM/ OFF/PLAY) Switch
C
O
UNTE
R
ME
M
RES.
DATE/TIME
ADJ.
PULL
REW (Rewind) Button
Still (ll ) Button
BATTERY
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
MODE SEL.
AUTO LOCK
F.FWD Button
+
–
MANUAL FOCUS
PLAY Button
STOP Button
• During playback, press and hold the F.FWD (fast
forward) or REW (rewind) button if you want to
visually search the tape in forward or reverse.
Release the button to return to normal playback.
Viewfinder playback is the simplest way to watch
tapes using the camcorder. This method is generally
used only to review scenes immediately after
recording because the display is in black and white.
If you want to privately listen during viewfinder
playback, you may connect an optional earphone to
the earphone jack.
4. Press the STOP button when you are finished.
To play back a tape through the viewfinder, follow
these steps:
Notes: The corresponding buttons on the remote control
1. Slide the POWER switch to the PLAY position.
2. Insert the cassette you want to playback.
3. Press the PLAY button to begin playback.
can be used to operate the camcorder.
The camcorder can play back tapes recorded in SP or LP
speed. The LP indicator appears in the electronic
viewfinder when a tape recorded at LP speed is being
played. Tapes recorded at SLP speed cannot be played
back in this camcorder.
• During playback, press the still (ll ) button to
“stop the action” and view one frame of the tape.
Press the still (ll ) button again (or the PLAY
button) to return to normal playback.
During still and search operations, it is normal for streaks
to appear in the picture.
The sound is muted during special playback operations.
Caution: Still is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder
remains in the still mode for more than five
minutes, it will automatically move the tape
away from the spinning heads to prevent
excessive tape wear.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on a TV (or VCR) Using the Antenna Connection
To connect your camcorder to a TV using the
antenna connection, you will need the RF output
The unauthorized recording of television
adapter and coaxial RF cable that came packed with
programs and other recorded material
your camcorder. If your TV is already connected to
may infringe the rights of others.
a VCR, you can attach the camcorder to the VCR
and watch what the camcorder is recording or
playing on the TV.
VHF
IN
FROM
ANT
OR
2
Back of TV
or VCR
C
O
UNTE
R
ME
M
RES.
DATE/TIME
ADJ.
PULL
VHF
Coaxial
TERY
RF Cable
(supplied)
F.FWD.
REW
FOCUS
PLAY
STOP
ON
OFF
Back of TV
MODE SEL.
AUTO LOCK
+
CHANNEL
4CH/3CH
Switch
–
MANUAL FOCUS
Output Jacks
(Located behind door)
VHF Antenna
1
OR
3
RF Output
Adapter
(supplied)
Optional 300/75
VHF Antenna
Ohm Transformer
(such as 193983)
Installation
2 Attach one end of the coaxial RF cable to the
VHF OUT connector on the adapter and attach
the other end to the VHF input on your TV (or
VCR) as shown.
1 Disconnect the VHF antenna from your TV
(or VCR). Connect the antenna to the VHF IN
connector on the RF output adapter if you are
going to leave the adapter connected to the TV
(or VCR).
3 Attach the RF output adapter’s plug to the
output jacks located behind the door on the side
of the camcorder as shown above.
Note: If your VHF antenna is the flat twin-lead type
attached by two screws, you will also need an optional
300/75 ohm transformer, such as 193983 shown on
page 6.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on a TV Using the Antenna Connection (continued)
Playback Operation and How to Copy Tapes
on the VCR
Viewing What the Camcorder Is Recording
1. A. Camcorder connected directly to TV: Turn on
the TV and tune it to channel 3 or 4.
1. Set the CHANNEL 4CH/3CH switch on the RF
output adapter to 4CH or 3CH.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and tune it to
channel 3 or 4”. Operate the TV as you
normally do to see the signal coming from the
VCR.
2. A. Camcorder connected directly to TV: Turn on
the TV and tune it to channel 3 or 4.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and tune it to
channel 3 or 4”. Operate the TV as you
normally do to see the signal coming from the
VCR.
Note: When the camcorder is used as a camera,
turn the TV’s volume down to prevent a high-
pitched squeal caused by feedback.
2. Set the CHANNEL switch on the RF output
adapter to the same channel you selected on the
TV (or VCR).
3. Attach a power supply, and slide the camcorder’s
POWER switch to the PLAY position. Insert the
cassette you want to play back.
3. Attach a power supply and slide the camcorder’s
POWER switch to the CAM position. Insert the
cassette you want to record on. Make sure the
ON/POWER SAVE lever is in the ON position.
Press the thumb trigger on the camcorder (or the
RECORD START/STOP button on the remote
control) to start recording. You can watch what
you are recording on the TV screen.
4. Press the PLAY button to begin playback.
• During playback, press the still (ll) button to
“stop the action” and view one frame of the
tape. Press the still (ll) button again (or the
PLAY button) to return to normal playback.
Caution: Still is designed for momentary
interruptions, and should not be used for
extended time periods. If the camcorder
remains in the still mode for more than five
minutes, the camcorder will automatically
move the tape away from the spinning heads
to prevent excessive tape wear.
Seeing the Camcorder’s displays on the TV
Screen.
When the camcorder is connected to a TV, press the
DISPLAY button on the remote control to see the
camcorder’s viewfinder displays on the TV screen.
Press the DISPLAY button again to remove the
displays.
• During playback, press and hold the F.FWD
(fast forward) or REW (rewind) button if you
want to visually search the tape in forward or
reverse. Release the button to return to normal
playback.
5. To copy what the camcorder is playing, place a
blank cassette in the VCR, and press the VCR’s
RECORD button.
Normal TV Viewing
For normal TV viewing, you may leave the RF
output adapter hooked up to the TV (or VCR). Just
disconnect the adapter’s plug from the camcorder or
turn off the camcorder’s power.
6. Press the STOP button when you are finished.
Notes: The corresponding buttons on the remote control
can be used to operate the camcorder.
Note to Cable TV Installer
The camcorder can play back tapes recorded in SP or LP
speed. The LP indicator appears in the electronic
viewfinder when a tape recorded at LP speed is being
played. Tapes recorded at SLP cannot be played back on
this camcorder.
This reminder is provided to call your attention to Article
820-40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines
for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system
of the building as close to the point of cable entry as
practical.
During still and search operations, it is normal for streaks
to appear in the picture.
The sound is muted during special playback operations.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on TV (or VCR) Using AUDIO/VIDEO IN Jacks
To connect your camcorder to a TV monitor (or
VCR) using AUDIO/VIDEO IN jacks, you will need
The unauthorized recording of television
optional audio/video cables. If your TV is already
programs and other recorded material may
connected to a VCR, you can attach the camcorder
infringe the rights of others.
to the VCR and watch what the camcorder is
recording or playing on the TV.
C
O
U
N
T
E
RME
M
R
E
S.
D
A
T
E/TIME
A
D
J.
PULL
Optional
Audio/Video
Cables*
(such as AH069G,
AH070G, or AH075G)
TERY
F.FWD.
Back of
Mono VCR or
TV Monitor
REW
FOCUS
PLAY
STOP
ON
OFF
1
White
Audio Plug
Yellow
MODE SEL.
AUTO LO
CK
+
Video Jack
–
MANUAL FOCUS
AUDIO
IN
White
Audio Jack
VIDEO
IN
2
Yellow
Video Plug
Pull Here to
Open Door
2
Yellow Video Plug
1
White
Audio Plug
C
O
U
N
T
E
RME
M
R
E
S.
D
A
T
E/TIME
A
D
J.
PULL
OR
Optional
Y-Adapter
Audio/Video
Cables*
ERY
Back of
(available from
F.FWD.
REW
FOCUS
1 White
Audio
Plug
Stereo VCR or
TV Monitor
electronics
supply store)
PLAY
(such as AH069G,
AH070G, or
AH075G)
STOP
ON
OFF
Yellow
Video Jack
MODE SEL.
AUTO LO
CK
+
L
–
MANUAL FO US
C
AUDIO
IN
White
Audio Jack
Pull Here to
Open Door
R
Yellow
Video Plug
2
VIDEO
IN
2
Yellow Video Plug
1
White
Audio Plug
Installation
1 Attach one end of an optional audio/video cable
(such as AH069G, AH070G, or AH075G) to the
AUDIO IN jack on the TV (or VCR) and the
other end to the white audio jack located under
the door on the side of the camcorder.
2 Attach one end of another optional audio/video
cable to the VIDEO IN jack on the TV (or VCR)
and the other end to the yellow video jack located
under the door on the side of the camcorder.
Note: If your TV (or VCR) has stereo AUDIO jacks,
attach the AUDIO plug to the one labeled MONO. If
one is not labeled MONO, you may need a Y-adapter
to hear sound from both channels.
*Optional accessories are available from your dealer or electronics supply store. Mail order form is on page 5.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback on TV (or VCR) (continued)
Playback Operation and How to Copy
Tapes on the VCR
Viewing What the Camcorder is Seeing
(or Recording)
1. A. Camcorder connected directly to TV monitor:
Turn on the TV and tune it to the video input
channel.
1. A. Camcorder connected directly to TV: Turn on
the TV, and tune it to the video input channel.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and place it in
the “line” or “camera mode”. (If your VCR
does not have a “line” or “camera mode”,
consult the VCR owner’s manual.) Operate
the TV as you normally do to see the signal
coming from the VCR.
B. Camcorder connected to VCR that is already
connected to TV: Turn on VCR and place it in
the “line” or “camera mode”. (If your VCR
does not have a “line” or “camera mode”,
consult the VCR owner’s manual.) Operate the
TV as you normally do to see the signal
coming from the VCR.
2. Attach a power supply and slide the camcorder’s
POWER switch to the CAM position. Place the
ON/POWER SAVE lever in the ON position, and
insert the cassette you want to record on.
2. Attach a power supply and slide the camcorder’s
POWER switch to the PLAY position. Insert the
cassette you want to playback.
Note: When the camcorder is used as a camera, turn the
TV’s volume down to prevent a high-pitched squeal
caused by feedback.
3. Press the PLAY button to begin playback.
• During playback, press the still (ll) button to
“stop the action” and view one frame of the
tape. Press the still (ll) button again (or the
PLAY button) to return to normal playback.
3. Press the camcorder’s thumb trigger (or the
remote control’s RECORD START/STOP button)
to begin recording. You can watch what the
camcorder is seeing (or recording) on the TV
screen.
Caution: Still is designed for momentary
interruptions, and should not be used for
extended time periods. If the camcorder
remains in the still mode for more than five
minutes, the camcorder will automatically
move the tape away from the spinning heads
to prevent excessive tape wear.
Seeing the Camcorder’s displays on the TV
Screen.
When the camcorder is connected to a TV, press the
DISPLAY button on the remote control to see the
camcorder’s viewfinder displays on the TV screen.
Press the DISPLAY button again to remove the
displays.
• During playback, press and hold the F.FWD
(fast forward) or REW (rewind) button if you
want to visually search the tape in forward or
reverse. Release the button to return to normal
playback.
4. To copy what the camcorder is playing, place a
blank cassette in the VCR, and press the VCR’s
RECORD button.
5. Press the STOP button when you are finished.
Notes: The corresponding buttons on the remote control
can be used to operate the camcorder.
The camcorder can play back tapes recorded in SP or LP
speed. The LP indicator appears in the electronic
viewfinder when a tape recorded at LP speed is being
played. Tapes recorded at SLP cannot be played back on
this camcorder.
During still and search operations, it is normal for streaks
to appear in the picture.
The sound is muted during special playback operations.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks
look below for the type of trouble you are
experiencing. Then perform the simple checks and
adjustments listed for that trouble.
Troubles sometimes are caused by simple “faults”
that you can easily correct without the help of a
service technician by first checking a few basic
remedies.
If service should be necessary, the warranty
information lists what your warranty covers and
explains how to get service.
Before you call or take your camcorder to an
Authorized RCA Compact Camcorder Servicenter,
Trouble
Checks and Adjustments
No power
• ON/POWER SAVE lever in POWER SAVE position. Place lever in ON
position.
• If using battery, it may need to be recharged.
• If using AC adapter/charger, make sure it is plugged into a working
outlet.
Won’t record or playback
• If using AC adapter/charger, make sure it is plugged into a working
outlet.
• If dew indicator ( ) appears in the viewfinder, there is moisture in the
camcorder. Remove the cassette from the camcorder and let it dry
naturally.
• There may be no cassette in the camcorder.
• Try ejecting and re-inserting the cassette.
• The cassette tape may be broken, try another cassette.
• You may have reached the end of the cassette, try rewinding it.
Won’t playback
Won’t record
• POWER switch must be in PLAY position.
• Record-protect tab has been closed. (See page 20.)
• POWER switch must be in CAM (camera) position.
• ON/POWER SAVE lever must be in ON position.
No picture in viewfinder
• Remove lens cap.
• ON/POWER SAVE lever must be in ON position when POWER switch is
in CAM (camera) position.
Tape stops during rewind or
fast forward
• Time-counter memory may be on. Whenever an “M” appears with the
time-counter display, the camcorder will stop rewinding (or fast
forwarding) when counter reads “M 0:00:00”. Press the REW or F.FWD
button again to continue rewinding or fast forwarding, or press
COUNTER MEM (memory) button to turn off memory-stop feature.
Camcorder remains in “stop
action” (play-pause) mode
• Press the still (ll) (or PLAY) button to return to normal playback.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Checks (continued)
Trouble
Checks and Adjustments
• Make sure AUTO LOCK switch is in the AUTO LOCK position.
• Scene is dark. Auto-focus may not work under this condition. See page 26
for details on manual focus.
Poor auto-focus operation
• Lens is smudged, and image appears unfocused.
• Viewfinder eyepiece focus is misadjusted. (See page 23.)
• Select the best preset program mode for the recording situation.
See page 27.
Picture is too dark or
subject too dark.
• Try adjusting eyepiece focus control. See page 23.
• Pull electronic viewfinder out to the extended operating position.
Viewfinder displays are
out of focus
• Date and time or date will be recorded on tape whenever they appear in the
viewfinder.
Date and/time (or date)
were recorded on tape
• Press DATE/TIME button to remove them from viewfinder when recording.
• Clock battery may need replacing. See page 22.
• Date and/or time may need to be set. See pages 22-23.
Date and/or time are
incorrect
• Aim remote control at remote control sensor on camcorder.
• Remote control batteries may need replacing.
• If POWER switch is in CAM position, the ON/POWER SAVE lever must be
in ON position for camcorder to operate.
Remote control
will not operate camcorder
• POWER switch must be in CAM or PLAY position for camcorder to
operate.
• Camcorder’s remote control sensor is exposed to direct sunlight or strong
artificial light. This may interfere with operation of camcorder by remote
control.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Design Specifications
General
This digital apparatus does not exceed the class B
limits for radio noise emissions from digital
apparatus set out in the Radio Interference
Regulations of the Canadian Department of
Communications.
Power requirement: 6VDC
Power consumption: 5.8 watts (normal)
Weight: 1.7 lbs. (780g)
Dimensions: 4-3/5"(W) x 4-3/5"(H) x 10-1/5"(L)
(117 x 118 x 259mm)
L’interférence radioélectrique générée par cet
appareil digital ne dépasse pas les limites de la
classe B édictées par le Réglement sur les
peturbations radioélectriques du Ministrére
Canadien des Communications.
Video Recorder Section
Format: 8mm
Record/Playback System:
Two video record/playback heads
One flying erase head
Headwheel Cylinder Diameter: 40 mm
Video Signal: EIA Standard NTSC Color
Camera Section
Scanning: 525 Lines/60 Fields/30 Frames
Image Sensor: 1/3" high-resolution,
solid-state CCD Imager
Tripod Mount: One 1/4" threaded hole
Lens: f1.8
8:1 (6-48mm)
Diameter: 37 mm
Earphone Jack: Monaural 8 ohm mini jack
All features and specifications are subject to
change without notice.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Compact Camcorder Limited Warranty
What your warranty covers:
• Any defect in material or workmanship.
• 90 days for labor charges.
• One year for parts.
What your warranty does not cover:
• Customer instruction. (Your owner’s manual
clearly describes how to install, adjust, and operate
your camcorder. Any additional information
should be obtained from your Dealer.)
The warranty period for rental units begins with the
first rental.
• Installation and related adjustments.
• Cleaning of video/audio heads.
• Damage from misuse or neglect.
• Batteries for clock or other features.
What we will do:
• Pay any Authorized RCA Compact Camcorder
Servicenter the labor charges to repair your
camcorder.
• A camcorder that has been modified or
incorporated into other products or is used for
institutional or other commercial purposes.
• Pay any Authorized RCA Compact Camcorder
Servicenter for the new or, at our option, rebuilt
replacement parts required to repair your
camcorder.
• A camcorder purchased or serviced outside
the USA.
How state law relates to this warranty:
How you get service:
• This warranty gives you specific legal rights, and
you also may have other rights that vary from state
to state.
• Check with your RCA Dealer or call
1-800-336-1900 for the Authorized RCA Compact
Camcorder Servicenter nearest you. State that you
have an RCA 8 millimeter camcorder.
Product registration:
If an Authorized RCA Compact Camcorder
Servicenter is conveniently near you:
• Please complete and mail the product registration
card packed with your camcorder. It will make it
easier to contact you should it ever be necessary.
The return of the card is not required for warranty
coverage.
• Take your camcorder to the Authorized RCA
Compact Camcorder Servicenter of your choice.
• Show the Servicenter Representative your sales
receipt or other evidence of purchase date.
If you purchased your camcorder in Canada:
• Pick up your camcorder when repairs are
completed.
• The Canadian warranty applies in place of this
warranty.
If an Authorized RCA Compact Camcorder
Servicenter is not located conveniently near you:
• Pack the camcorder so that it will not be damaged
during shipping. (We recommend using the
original carton and packing materials.) Include
any cables and other accessories originally
furnished with the camcorder.
• Include in the camcorder carton (1) a copy of your
sales receipt or other evidence of purchase date,
(2) your name and address, and (3) a brief
description of the problem.
• Ship the camcorder to an Authorized RCA
Compact Camcorder Servicenter.
• Pay any charges billed to you by the Servicenter
for service not covered by the warranty.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Accessories, Included .............................................8
Accessories, Optional..........................................4-7
Accessory Shoe.....................................................12
Accessory, Order Form........................................5-6
Adapter/Charger, Safety
Date and Time, Setting....................................22-23
DATE/TIME Button...............................13,22-23,25
DC Car Cord, Optional .........................................19
DC IN 6.5V Jack .........................................13,16,19
DC Power Cord..................................................8,16
Design Specifications............................................38
Dew Indicator...................................................10,24
DISPLAY Button....................................14-15,33,35
Displays in Viewfinder....................................24-25
Earphone Jack.............................................13,21,31
EJECT Button........................................10-11,13,20
Electronic Viewfinder, Adjusting.........................23
Erase Protection ....................................................20
Eyepiece Focus Control.........................10-11,12,23
F.FWD (Fast Forward)
Button ...................................12,14-15,21,31,33,35
FF Display ............................................................24
First-Time Operation.........................................8-13
Flickerless Mode...................................................27
Flying Erase Head.................................................21
FOCUS ON/OFF Button ............................12,25,26
Focusing Your Camcorder....................................26
Hand Strap .......................................................10,13
Important Safeguards...........................................2-3
Important Safety Instructions .....Inside Front Cover
Inserting and Removing Cassettes........................20
Introduction.............................................................8
Lens..................................................................12,30
Lens Cap ............................................................9,13
Limited Warranty..................................................39
Low Level Battery Warning .................................18
Low Light Mode ...................................................27
LP Tape Speed Display.........................................24
Maintenance and Care...........................................30
Making Better Videos...........................................29
MANUAL FOCUS + and – Buttons.......12,24-25,26
Manual Focus (MF, MF+, and MF–)
Instructions ...............................Inside Front Cover
Adapter/Charger, Using........................................16
ADJ. (Adjust) Button..................................13,22-23
Attaching the Shoulder Strap..................................9
AUTO LOCK Switch..............................10,12,21,27
Auto Focus............................................................26
Auto High-Speed Shutter Mode............................27
Auto Mode ............................................................27
Batteries, Remote Control.....................................14
BATTERY Eject Lever......................................12,18
Battery Safety Precautions....................................18
Battery Warning...............................................18,24
Battery, Care and Storage .....................................18
Battery, Using Rechargeable...........................17-18
CAM/OFF/PLAY POWER Switch..............10-11,12
Camcorder, Powering......................................16-19
Camcorder, Turning On........................................10
Camcorder, Unpacking ...........................................8
Car Cord, Optional................................................19
Care and Maintenance...........................................30
Care and Storage of the Battery............................18
Cassette Care and Storage.....................................30
Cassette Compartment ................................10,13,20
Cassettes, Inserting and Removing..................10,20
Charging the Battery.............................................17
Cleaning the Viewfinder.......................................23
Clock Battery Compartment ............................12,22
Close-Up Mode.....................................................27
Compact Camcorder Limited Warranty................39
Connection, TV Using Antenna ......................32-33
Connection, TV Using AUDIO/VIDEO
Jacks...............................................................34-35
Contents.................................................Front Cover
Copying Tapes.................................................32-35
COUNTER MEM (Memory) Button......13,24-25,28
COUNTER MEMORY Button..........14-15,24-25,28
COUNTER RES. (Reset) Button............13,24-25,28
COUNTER RESET Button ...............14-15,24-25,28
Date and Time Display..........................22-23,24-25
Date and Time, Recording....................................23
Indicators ..................................................24-25,26
Memory Stop Indicator...............................24-25,28
Memory-Stop Feature...........................................28
Microphone......................................................12,21
MODE SEL Button ..........................................24,27
ON/POWER SAVE Lever ...........................10-11,13
OPEN Button ..............................................10,13,20
Operation, First-Time........................................8-13
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (continued)
Optional Accessories...........................................4-7
Order Form, Accessory........................................5-6
Output Jacks (Yellow Video, DC, and
White Audio) ............................................12,32,34
PAUSE Display.....................................................24
PLAY Button......................11,12,14-15,24,31,33,35
PLAY Display........................................................24
Playback...........................................................31-35
Playback on a TV Using Antenna
SCENE SEARCH + and – Buttons..............14-15,21
Setting the Time and Date ...............................22-23
Shoulder Strap Rings .........................................9,13
Shoulder Strap, Attaching.......................................9
Solving Problems.............................................36-37
SP Speed ...............................................................20
Special Features ....................................................21
Specifications........................................................38
Sports Mode..........................................................27
Status Displays......................................................24
Still ( ) Button .....................................12,31,33,35
STILL Button ...................................14-15,31,33,35
STOP Button......................11,12,14-15,21,31,33,35
STOP Display........................................................24
Storage ..................................................................30
T (Telephoto) Zoom Button..................................25
Table of Contents ..................................Front Cover
Tally Light .............................................11,12,15,21
TAPE END Indicator.............................................24
TAPE Indicator......................................................24
Tape Copying ..................................................32-35
Tape Positioning ...................................................21
Things to Avoid ....................................................30
Thumb Trigger.................................................11,13
Tilt Adjustment, Viewfinder.................................23
Time and Date Display....................................22-23
Time and Date, Recording....................................23
Time and Date, Setting....................................22-23
Time Counter Display .....................................24-25
Time Counter with Memory Stop Feature............28
Tips, Recording.....................................................29
Tips, Traveling......................................................29
Tripod, Using..........................................................7
Trouble Checks................................................36-37
Turning On the Camcorder...................................10
Unpacking the Camcorder ......................................8
Video Cassettes................................................20,30
Viewfinder..............................10-11,12,23,24-25,31
Viewfinder Displays........................................24-25
Viewfinder Playback.............................................31
Viewfinder, Cleaning............................................23
W (Wide Angle) Zoom Button..............................25
Warranty ...............................................................39
Zooming, Power....................................................25
Connection.....................................................32-33
Playback on a TV Using AUDIO/VIDEO IN
Jacks...............................................................34-35
Playback, First .................................................10-11
Playback, Viewfinder............................................31
Positioning the Tape .............................................21
POWER CAM/OFF/PLAY Switch..............10-11,12
Power Zooming.....................................................25
Powering the Camcorder .................................16-19
Preset Program Indicators................................24,27
Preset Program Modes.....................................24,27
Problem Solving ..............................................36-37
Product Registration ...................Inside Front Cover
Program Preset Modes.....................................24,27
Quick Review........................................................21
RCA Video Cassettes.......................................20,30
REC Display..........................................................24
REC START/STOP Button (Thumb Trigger)...11,13
RECORD START/STOP Button.......................14-15
Record-Protect (Safety) Tab .................................20
Recording Speed and Times .................................20
Recording Steps, First-Time..............................8-13
Recording Tips......................................................29
Recording, First ...............................................10-11
Refreshing the Battery ..........................................17
Registration Card........................Inside Front Cover
Remote Control................................................14-15
Review, Quick.......................................................21
REW (Rewind) Button.......11,12,14-15,21,31,33,35
REW Display.........................................................24
Safeguards, Important..........................................2-3
Safety (Record-Protect) Tab .................................20
Safety Instructions for AC
Adapter/Charger .......................Inside Front Cover
Safety Instructions ......................Inside Front Cover
Safety Precautions...................................................1
41
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest home
entertainment Dealer
or Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
If you would like a copy of this manual in French, please follow the
instructions below:
Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous
pouvez en obtenir un (indiquer le numéro de modèle, votre nom, et votre
adresse) en vous adressant à:
Thomson Électronique Grand Public du Canada
Service des données techniques
6540 Tomken Rd
Mississauga, Ontario, Canada L5T 2E9
Thomson Consumer Electronics
600 N Sherman Dr, PO Box 1976
Indianapolis, IN 46206
©
1992 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Japan
Part Number 92-Pro807-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|