Television
User’s Guide
Changing Entertainment. Again.
15720240 Cover
1
4/9/02, 12:59 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Key Features Overview
Your TV is equipped with features that will add to your TV watching experience. The following information summarizes
a few of these features. Chapter 2 provides more information about the rest of the TV’s features and how to use them.
On-screen Program Guide
Description: The GUIDE Plus+ system is an on-screen
interactive list of programs and information that is built
into your TV. You can scroll through the guide to see
what’s on and tune directly to that program from the
guide. You can also browse programs by category with
the sort feature.
When you access the News feature, MSNBC will appear in
your video window if it’s available through your TV.
One-Touch VCR Recording is another benefit of the
GUIDE Plus+ system. You don’t have to remember to
program your VCR or use the menus in your VCR to set
up a recording.
Requirements:
•
Complete the on-screen interactive setup. You’ll find
detailed instructions in Chapter 1.
•
One-Touch VCR Recording: You must connect the G-
LINK cable to the TV and place one of the wands in front
of the remote sensor on the VCR.
•
If you have a cable box, connect the G-LINK cable to
the TV and place one of the wands in front of the
remote sensor on the cable box.
V-Chip: Parental Controls
Description: You can block programs and movies by
V-CHIP TV RATING LIMIT
- - Content - -
Rating Status D L S V FV
content, age-based ratings, and/or movie ratings.
TV-14
View
V V V V
Requirements:
^
•
Set up the Parental Controls menu in the TV’s main
menu (Chapter 2 has details).
Press ^/v to view programs with
this content for this rating.
RATING STATUS
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
•
The broadcasters must use the rating system when
they send the program to your TV in order for your
TV to block the program.
D L S V FV
B V V
V V V V
V B V V
View
View
View
View
View
View
V
1
15720240 Intro
1
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240 Intro
2
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction
Key Features Overview ...................................................................... 1
On-screen Program Guide ............................................................................................. 1
V-Chip: Parental Controls .............................................................................................. 1
Chapter 1: Connections & Setup
Things to Consider Before You Connect ........................................... 6
Protect Against Power Surges ....................................................................................... 6
Protect Components from Overheating ....................................................................... 6
Position Cables Properly to Avoid Audio Interference ................................................ 6
Important Stand and Base Safety Information ............................................................ 6
Use Indirect Light ........................................................................................................... 6
Choose Your Connection.................................................................... 7
TV + VCR .............................................................................................. 8
TV Only................................................................................................ 9
TV + VCR + Satellite Receiver........................................................... 11
The Front of Your TV ........................................................................ 12
Why You Should Connect This G-LINK Cable ................................. 13
How to Find the Remote Sensor ................................................................................. 13
Placing the G-LINK Wands ........................................................................................... 13
Plug in the TV ................................................................................... 14
Put Batteries in the Remote............................................................. 14
How to Use the Remote Control to Complete the
Interactive Setup .............................................................................. 14
Turn on the TV .................................................................................. 14
Complete the Interactive Setup ...................................................... 15
Set the Menu Language .............................................................................................. 15
Complete Auto Channel Search .................................................................................. 15
The GUIDE Plus+ System Setup ................................................................................... 15
What to Expect ................................................................................. 19
The Buttons on the Remote Control ............................................... 20
Chapter 2: Using the TV’s Features
About the GUIDE Plus+ System ....................................................... 22
Downloading Data ...................................................................................................... 22
Getting In & Out of the GUIDE Plus+ System ............................................................. 23
The GUIDE Plus+ System Menus .................................................................................. 23
Grid Guide .................................................................................................................... 23
Sort ............................................................................................................................... 25
News ............................................................................................................................. 26
Schedule ....................................................................................................................... 26
Messages ...................................................................................................................... 27
Channels ....................................................................................................................... 28
Setup............................................................................................................................. 28
How to Get More Information About an Advertisement or a Program .................. 29
3
15720240 TOC
3
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
GUIDE Plus+ Menu Items ................................................................. 29
Channel Banner ................................................................................ 30
Parental Controls and V-Chip........................................................... 30
How V-Chip Works ....................................................................................................... 31
V-Chip TV Rating Limit ................................................................................................ 32
Blocking Specific Content Themes .............................................................................. 34
Viewing Specific Content Themes .............................................................................. 35
V-Chip Movie Rating Limit .......................................................................................... 35
V-Chip Unrated Program Block ................................................................................... 37
Channel Block .............................................................................................................. 37
Front Panel Block ......................................................................................................... 37
Lock/Unlock Parental Controls .................................................................................... 38
Chapter 3: Using the TV’s Menu System
How to Use the Different Types of Menus and Control Panels .... 40
Menus ........................................................................................................................... 40
Control Panels .............................................................................................................. 40
Picture Quality Menu ....................................................................... 42
Screen Menu ..................................................................................... 42
Using Closed Captioning .................................................................. 43
Channel Menu .................................................................................. 44
Time Menu ........................................................................................ 44
Chapter 4: Other Information
Troubleshooting ............................................................................... 46
Care and Cleaning ............................................................................ 49
Limited Warranty.............................................................................. 49
Accessory Order Form ...................................................................... 51
Glossary ............................................................................................. 53
Index.................................................................................................. 54
4
15720240 TOC
4
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Connections & Setup
Chapter Overview:
•
•
•
•
•
•
•
•
•
•
•
Things to Consider Before You Connect
Choose Your Connection
Connections
The Front of Your TV
Why You Should Connect This G-LINK Cable
Plug in the TV
Put Batteries in the Remote
How to Use the Remote Control to Complete the Interactive Setup
Turn on the TV
Complete the Interactive Setup
Buttons on the Remote Control
Changing Entertainment. Again.
Graphics contained within this publication are for representation only.
5
15720240.01 Setup
5
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Things to Consider Before You Connect
Protect Against Power Surges
•
•
•
Connect all components before you plug any of their power cords into the wall outlet.
Turn off the TV and/or component before you connect or disconnect any cables.
Make sure all antennas and cables are properly grounded. Refer to the Important Safeguards sheet packed with your
TV.
Protect Components from Overheating
•
•
•
•
Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely.
Don’t stack components.
When you place components in a stand, make sure you allow adequate ventilation.
If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow around
other components.
Position Cables Properly to Avoid Audio Interference
•
Insert each cable firmly into the designated jack.
•
If you place components above the TV, route all cables down the side of the back of the TV instead of straight down
the middle of the back of the TV.
•
If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables away from
audio/video cables.
Important Stand and Base Safety Information
Choose the location for your TV carefully. Place the TV on a stand or base that is of adequate size and strength to
prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or
damage the TV. Refer to the Important Safeguards sheet packed with your TV.
Use Indirect Light
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect lighting.
6
Chapter 1
15720240.01 Setup
6
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Choose Your Connection
There are several ways to connect your TV. Please use the following chart to determine which connection is best for
you. Proceed to the appropriate page and connect your TV.
Components
Connection
Title
Cables
Needed
Go to...
page 8
TV + VCR
Coaxial
Audio/video
G-LINK cable
TV Only
Coaxial
page 9
G-LINK cable
Coaxial
Audio/video
G-LINK cable
TV + VCR +
Satellite Receiver
pages 10-11
Cables Needed to Connect Components to Your TV
The pictures below show the cables needed for the connections represented in this book.
Notes: Audio/Video cables (A/V cables for short) are usually sold as a bundled set, but the connection pictures
in this book show each cable separately for better visibility.
Please locate the G-LINK cable (provided) when you’re getting ready to set up your TV. You need to connect
this cable to your TV, and to your VCR and/or cable box in order for all of the features of the program guide to
work properly.
Coaxial cable
Audio/Video cables
G-LINK cable
Chapter 1
7
15720240.01 Setup
7
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
TV (back panel)
INPUTS
VIDEO
ANTENNA
G-LINK
AUDIO
3
1C
1A
1B
VCR
VIDEO
AUDIO
IN FROM ANT
OUT TO TV
CH
CH4
OUT
R
L
2
From Cable
or Antenna
TV + VCR
1. Connect your TV to your VCR
A. Connect a coaxial cable to the ANTENNA jack on your TV and to the Output
Jack on your VCR (sometimes labeled OUT TO TV).
B. Connect the audio/video cables. Connect an audio cable (white) to the AUDIO
input jack on the back of the TV and to the left mono Audio Output Jack on the
VCR (sometimes labeled OUT R L).
C. Connect the video cable (yellow) to the VIDEO input jack on the back of the TV
and to the Video Output Jack on the VCR.
2. Connect cable or antenna to your VCR
Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input
Jack on your VCR (sometimes labeled IN FROM ANTENNA or IN FROM ANT).
3. Connect the G-LINK cable to the TV
Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the
wands of the G-LINK cable to work with your VCR (instructions are on p. 13).
Go to page 13
8
Chapter 1
15720240.01 Setup
8
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
TV (back panel)
INPUTS
VIDEO
ANTENNA
G-LINK
AUDIO
2
1
From Cable,
Cable Box,
or Antenna
TV Only
1. Connect the TV to your cable or antenna
Connect the coaxial cable from your cable or antenna to the ANTENNA jack on the
back of your TV.
Go to page 14
2. If you’re connecting a cable box, connect the G-LINK cable
Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place the wands
of the G-LINK cable to the cable box (instructions are on p. 13).
Go to page 13
Chapter 1
9
15720240.01 Setup
9
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
SATELLITE RECEIVER
From Cable or Antenna
2A
CH3
CH4
OUT
OUT TO TV
SATELLITE
IN
VIDEO
R
L
2B
3A
1A
VCR
Satellite
Signal
1B
VIDEO
AUDIO
IN FROM ANT
OUT TO TV
CH3
CH4
OUT
R
L
3B
TV (back panel)
IPUTS
VIDEO
AUDIO
ANTENNA
G-LINK
4
10
Chapter 1
15720240.01 Setup
10
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
TV + VCR + Satellite Receiver
1. Connect your Satellite Receiver to your TV
A. Connect the audio/video cables. Connect an audio cable (white) to the AUDIO input jack on the back of the TV
and to the left mono Audio Output Jack on the Satellite Receiver.
B. Connect the video cable (yellow) to the VIDEO input jack on the back of the TV and to the Video Output Jack
on the satellite receiver.
2. Connect coaxial cables to the Satellite Receiver
A. Connect the coaxial cable from your cable outlet, cable box, or antenna to the Input Jack on your satellite
receiver (sometimes labeled IN FROM ANT).
B. Connect the coaxial cable from your satellite dish antenna to the Input Jack on your satellite receiver (sometimes
labeled SATELLITE IN).
3. Connect the Satellite Receiver to the VCR and to the TV
A. Connect a coaxial cable to the Output Jack (sometimes labeled OUT TO TV) on the satellite receiver and to the
Input Jack on the VCR (sometimes labeled IN FROM ANT).
B. Connect a coaxial cable to the Output Jack on the VCR (sometimes labeled OUT TO TV) and to the ANTENNA
jack on the TV.
4. Connect G-LINK cable
Connect the G-LINK cable to the G-LINK jack on the TV. Next step, place one of the wands of the G-LINK cable to
work with your VCR (instructions are on p. 13).
Go to page 13
Chapter 1
11
15720240.01 Setup
11
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
The Front of Your TV
Front Panel
If you cannot locate your remote you can use the front panel of your TV to operate
many of the TV’s features.
MENU Brings up the Main menu. When in the menu system, it selects highlighted items.
Also returns you to the previous menu. Press and hold MENU for two seconds to access
the GUIDE Plus+ system.
^
CH
Scans down through the current channel list. When you’re using the TV’s menu
system, it acts like the arrow down button on the remote control.
CH ^ Scans up through the channel list. When you’re using the TV’s menu system, it
acts like the arrow up button on the remote control.
VOL – Decreases the volume. When you’re using the TV’s menu system, it acts like the
left arrow button on the remote control.
VOL + Increases the volume. When you’re using the TV’s menu system, it acts like the
right arrow button on the remote control.
POWER Turns the TV on and off.
Front Panel Jacks
You can access the component you connected by pressing the INPUT button on your
remote until FRNT appears on the screen.
VIDEO
AUDIO
VIDEO (in) Allows you to connect a component such as a VCR, camcorder or Internet
access device.
AUDIO (in) Receives audio signals from another component such as a VCR, camcorder
or Internet access device.
12
Chapter 1
15720240.01 Setup
12
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Why You Should Connect This G-LINK Cable
The G-LINK cable enables the GUIDE Plus+ system (the on-screen interactive program
guide) to work with your VCR and/or cable box.
Cable Box – If your TV is connected to a cable box you must connect the G-LINK cable
to receive TV program listings for your area, and to tune directly to a channel when the
program guide is on your TV screen.
VCR – If your TV is connected to a VCR and you don’t connect the G-LINK cable, one-
touch recording won’t work. The other features of the guide will work properly.
How to Find the Remote Sensor
You have to place the G-LINK wands in front of the remote sensor on the VCR and/or
cable box. Some cable boxes and VCRs have the remote sensor labeled on the unit. If
the remote sensor isn’t labeled on your VCR and/or cable box, you need to use the
remote control that came with the VCR and/or cable box to locate the sensor.
G-LINK cable
1. Turn off the VCR and/or cable box.
2. Hold the remote control (not the one that came with your TV, but the one that came
with the cable box and/or VCR to which you’re attaching the G-LINK cable) so that it
is touching the front of the component.
3. Slowly move the remote control across the front of the component (VCR or cable box)
while you press the power button on and off. You must press and release the power
button each time you move the remote (holding down the button won’t work).
G-LINK wands
VCR
CABLE BOX
CHANNEL
03
4. When the component turns on, you’ve located the remote sensor.
Placing the G-LINK Wands
Place the G-LINK wands in front of the remote sensor on your VCR and/or cable box
approximately one inch away from the remote sensor (see instructions below).
TV (back panel)
INPUTS
VIDEO
ANTENNA
AUDIO
G-LINK
Connect to G-LINK jack
on the back of the TV.
VCR
Tip
CHANNEL
SENSOR
SENSOR
03
If you don’t have both a cable
box and a VCR connected to
your TV, just coil the cable of
the extra G-LINK wand with a
twist tie and leave it behind
the TV.
Chapter 1
13
15720240.01 Setup
13
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Plug in the TV
Plug the end of the power cord into the wall outlet. Match the wide blade of the plug
with the wide slot in the outlet. Insert the plug completely into the outlet.
Put Batteries in the Remote
1. Remove the battery compartment cover on the remote.
2. Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram
on the remote.
3. Put the battery compartment cover back on the remote.
How to Use the Remote Control to Complete
the Interactive Setup
The technical term is “Navigation” – how you move through the on-screen menus. The
theory is the same throughout the menu screens: highlight your choice and select it.
To highlight a menu item, press the arrow buttons on the remote to highlight one of the
items listed on the screen. Use the up or down arrow button to move up or down. Use
the right or left arrow button to move right or left.
To select the item that you’ve highlighted, press OK.
Note: Highlighted means that the menu item stands out from other menu
items on the list (appears darker, brighter, or a different color).
Turn on the TV
Press the POWER button on the remote control or the TV (the first screen of the
Interactive Setup appears). The menu screens “time out” after a period of time if you
don’t make a selection. The tips in this section tell you how to access the Setup menu
screens manually.
Use the arrow
buttons and the OK
button to move
through the menu
system.
14
Chapter 1
15720240.01 Setup
14
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Complete the Interactive Setup
The menu system in your TV allows the TV’s features to
work properly. In this book, we call it the “interactive
setup” because the TV asks you questions, you answer,
and the TV makes the appropriate adjustments. The first
time you turn on your TV, the setup screens appear
automatically.
Tip
To access the setup menus manually, press MENU
and choose Setup.
Set the Menu Language
SETUP
The first part of the SETUP asks you to select your
preferred language for the menu system.
Select the language to be used
in these menus.
1 English
2 Español
3 Français
1. Highlight your preferred language for the menu
system.
2. Press OK to select that language.
Complete Auto Channel Search
The next part of the SETUP asks you if you want the TV
to search for all channels viewable through your antenna
or cable TV system. This is sometimes called “auto
programming.”
SETUP
1. Press OK to tell the TV to begin searching for
channels. A progress report appears on the screen.
Would you like the TV to search
for all available channels?
1 Search for channels
2. When the screen on the TV tells you the search is
complete, press OK (the first GUIDE Plus+ system
setup screen appears).
2 Skip this step
Note: If you skip Auto Channel Search now,
you can access it later through the Channel
menu. See Chapter 3 for more details.
The GUIDE Plus+ System Setup
The GUIDE Plus+ system is an on-screen interactive
program guide that lists what shows are on TV in your
area. In order to receive program listings, you need to
complete the following steps.
Tip
The G-LINK cable must be connected to the back of your
TV, and the wands must be placed in front of the remote
sensor on the cable box and/or VCR in order for the
GUIDE Plus+ system to work (go back to page 13 for
details).
If you move to a new zip or postal code, or if any
of your information changes, you need to access
the setup screens from the TV’s main menu—
press MENU, choose GUIDE Plus+ Menu, and
choose GUIDE Plus+ Setup.
1. You should see a screen displaying the features of
the Guide Plus+ system. Press OK to continue.
2. The next screen asks you to locate setup materials
and hardware. Once you have done this, press OK to
continue.
Chapter 1
15
15720240.01 Setup
15
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Step 1: Identifying Your TV’s Location
1. If your country is highlighted, press OK on the
remote control.
If your country isn’t highlighted, press the up or
down arrow button on the remote control to
highlight your country and press OK.
2. Use the number buttons on your remote to enter
your zip code.
Press OK when you’re finished.
Note: If your postal code contains letters, press
the up and down arrow buttons on your
remote to enter letters, and press the right
arrow button to go to the next space. The left
arrow button moves you to the left.
Step 2: Configuring for Cable
The next series of screens asks you about your cable
setup. To supply your TV with the correct TV program
listings, the GUIDE Plus+ system needs to know if your
TV is connected to cable.
1. If your TV is connected to cable, highlight Yes and
press OK.
If your TV isn’t connected to cable, highlight No and
press OK (STEP 3: Configuring for a VCR appears).
2. If you have a cable box connected to this TV,
highlight Yes and press OK on your remote control.
Note: The next series of screens are very
important because GUIDE Plus+ system must
find the correct cable box information in
order for the program schedule to be correct
in your TV’s program guide.
If you don’t have a cable box connected to this TV,
highlight No and press OK (STEP 3: Configuring for a
VCR appears).
Tip
If you’re not sure which channel is the cable box’s output
channel, consult the book that came with your cable box or
contact your cable company.
16
Chapter 1
15720240.01 Setup
16
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
3. Highlight the channel to which you have to tune your
TV in order to see cable programming, and press OK
(a screen appears reminding you to connect your G-
LINK cable to your TV and cable box).
Note: Channel 03 is the most common.
4. Highlight your brand of cable box, and press OK.
If your brand isn’t listed, highlight Not Listed and
press OK.
5. Make sure your cable box is on.
Tune the cable box to channel 02 (use the remote
control that came with your cable box, or press the
channel buttons on the cable box).
Press OK (the GUIDE Plus+ system starts testing
codes).
Important Note: When code testing is in
progress, don’t touch your TV, VCR, cable box or
any of the remote controls for these products.
6. Look at your cable box. If it is still on and changed to
channel 09, the test was successful. Highlight Yes, and
press OK (STEP 3: Configuring for a VCR appears).
If your cable box didn’t change to channel 09 or
turned itself off, you have two choices: No and Test
this code again.
Test this code again: If you think the TV, the cable
box, or any of the remote controls might have been
touched or bumped during the test, highlight Test this
code again and press OK (the GUIDE Plus+ system
runs the same set of codes).
No: If you don’t think the test was interrupted,
highlight No and press OK (GUIDE Plus+ system tests
the next code).
Repeat the previous instructions until the TV finds the
correct cable box code. Follow the instructions on the
screen.
Note: If the TV can’t find your cable box code,
a troubleshooting checklist appears. Carefully
review each checklist and follow the
instructions on the screen.
Chapter 1
17
15720240.01 Setup
17
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Step 3: Configuring for a VCR
1. If your TV is connected to a VCR, press OK.
If it is not, highlight No and press OK (a screen
appears reminding you to connect your G-LINK cable
to your TV and VCR).
2. Use the up and down arrow buttons to highlight the
brand of your VCR that is connected to the TV.
If your brand isn’t listed, highlight Not Listed and
press OK.
3. Tune your VCR to channel 02. Next, turn OFF your
VCR. When you complete these steps, press OK to
begin testing.
Important Note: When code testing is in
progress, don’t touch your TV, VCR, or any of
the remote controls for these products.
4. Look at the front of your VCR. If your VCR turned on
automatically and changed to channel 09, the test
was successful. Highlight Yes and press OK.
If your VCR didn’t change to channel 09, you can
either choose No or Test this code again.
If you think your TV or remotes might have been
touched during the test, tune your VCR to channel 02,
turn off your VCR and highlight Test this code again.
If you don’t think the test was interrupted, highlight
No. Tune your VCR to channel 02 and turn off your
VCR. Press OK (the GUIDE Plus+ system starts testing
another set of codes.)
Keep following the previous instructions until the
VCR finds the correct code.
18
Chapter 1
15720240.01 Setup
18
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
Note: If the GUIDE Plus+ system can’t locate
the correct code for the VCR, a list of
troubleshooting instructions appears to help
you before you try again.
Tip
Leave your cable box turned ON to download
program information.
•
Try VCR configuration again: repeat
VCR setup.
Leave your VCR turned OFF to record programs.
•
Test alternate codes: tests selected
brands and if this fails, the test
continues with all codes in the system.
•
Skip this step: the system won’t be able to
automatically schedule programs to
record on your VCR.
Step 4: Confirming Your Settings
1. Check to make sure all settings are complete and
correct. If all settings are complete, highlight Yes, end
setup and press OK. If your cable box and/or VCR
code testing failed, you should see INCOMPLETE
where the cable box and VCR codes are listed. Once
setup is complete, additional screens appear.
If any settings are incomplete or incorrect, highlight
No, repeat setup process and press OK. Follow the
instructions on the screen.
2. You can choose to view a demo of the GUIDE Plus+
features, which may take a few minutes to load. If
you don’t want to see the demo right now, press OK
to watch TV.
What to Expect
The next time you turn on your TV, the GUIDE Plus+
system will appear on the screen. The following
examples explain what you might see:
•
•
If all of the program information has been sent to
your TV, the GUIDE Plus+ system appears with all of
your TV program listings.
If the program information hasn’t been sent to your
TV yet, an outline of the GUIDE (without TV
program listings) will appear on the screen. Program
information is usually sent to your TV at night.
•
If the TV detected that you have multiple cable
companies in your area, STEP 5: Choosing Your
Channel Lineup appears.
Features of the GUIDE Plus+ system are explained in
Chapter 2.
To clear the guide from your screen, press CLEAR or
GUIDE on the remote control.
Chapter 1
19
15720240.01 Setup
19
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections & Setup
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers and time settings directly through the
POWER
remote control.
To enter a two-digit channel, press the two digits. To enter a three-digit channel, press
and hold the first digit for two seconds until two dashes appear to the right of the
number, then add the second two. Example: to tune to channel 123, press and hold 1 for
two seconds, press 2, then press 3.
GO
BACK
VOL
CHAN
INFO
MUTE
GUIDE
Arrow buttons (up, down, left, right) Press the arrow buttons to move through the
on-screen menu system.
CHAN (up and down) buttons Scan up or down through the current channel list.
Press once to change the channel up or down; press and hold to continue changing
channels.
MENU
CLEAR
CLEAR Removes any menu or display from the screen and returns you to TV viewing.
1
4
7
2
5
8
0
3
GO BACK Returns you to the previous channel.
6
9
GUIDE Press GUIDE to make the GUIDE Plus+ system appear on the screen. Press
GUIDE again to remove it from the screen.
INPUT
SKIP
INFO Displays channel information.
INPUT Changes your TV to its Video Input Channel (VID/FRNT and the current
channel). The Video Input Channel is the channel your TV must tune to in order for you
to access a component that’s connected to your TV’s VIDEO and AUDIO jacks. Example:
to view a tape from your camcorder, connect the camcorder to the TV’s AUDIO and
VIDEO jacks with the audio/video cables.
MENU Displays the TV’s Main menu. You can also press and hold for 2 seconds to
display the GUIDE Plus+ system.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
OK When a menu is on the screen, press OK to select the item that is highlighted.
POWER Turns the TV on and off.
SKIP If you press this button before you change the channel, the TV waits 30 seconds
and automatically goes back to the original channel. Each time you press SKIP, you add
30 seconds (i.e, if you press SKIP two times before you change the channel, the TV waits
60 seconds and automatically turns back to the original channel). When you reach four
minutes and thirty seconds, pressing SKIP adds one minute.
VOL (up and down) buttons Decrease or increase the TV’s volume.
20
Chapter 1
15720240.01 Setup
20
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Using the TV’s Features
Chapter Overview:
•
•
•
•
About the GUIDE Plus+ System
GUIDE Plus+ Menu Items
Channel Banner
Parental Controls and V-Chip
Changing Entertainment. Again.
Graphics contained within this publication are for representation only.
21
15720240.02 Features
21
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Program
information options
Menu
Video
window
Action
buttons
About the GUIDE Plus+ System
The GUIDE Plus+ system is an interactive on-screen
program guide that lists TV schedules for your area and
allows your TV direct control of a cable box and VCR.
You must first set up the GUIDE Plus+ Menu system in
order to view this on-screen program guide (see Chapter
1 for details). Press GUIDE to bring up the GUIDE Plus+
system.
There are six sections of the GUIDE Plus+ system:
•
A row of Action buttons at the top of the screen (1,
2 and 3)
•
•
•
Video window
Program information
A row of menu options (Grid, Sort, News, Schedule,
Messages, Channels, Setup)
•
•
Channel listings
Promotional information
Channel
listings
Promotional
information
Note: The GUIDE Plus+ system screens
illustrated in this book are representations of
what you are likely to see. Not all channels,
programs, and GUIDE Plus+ information
depicted will be available in your area.
New features and options can be downloaded
to the GUIDE Plus+ system, so these too are
subject to change.
Downloading Data
Tip
The GUIDE Plus+ system is not available until it
completes its first download of program information.
When the power is turned off, the TV locates a “host
channel” that carries GUIDE Plus+ system data
containing program schedule and channel lineup
information. A channel lineup is the list of stations and
their respective channels.
Since the program information provided by the
GUIDE Plus+ system is based on your locale, you will
need to run Setup again if you move to a different
zip or postal code.
To ensure that your first download of data is complete,
you should leave your TV off overnight. Downloads
occur several times a day. The TV must be turned off for
GUIDE Plus+ system data to download.
If the TV loses power or is unplugged, GUIDE Plus+
system program listings may be lost. When power is
restored, make sure the setup information is still correct.
The GUIDE Plus+ system will receive updated program
information during the next scheduled download.
Channel Lineup
If more than one cable company services your area, you
may be prompted with STEP 5: Choosing Your Channel
Lineup after the first GUIDE Plus+ system download.
You will need to identify your cable company by
selecting the correct channel numbers for the stations in
question.
•
Use the up and down arrow buttons to change the
channel group and press OK when the correct
channel group is highlighted.
22
Chapter 2
15720240.02 Features
22
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Getting In & Out of the GUIDE Plus+
System
To enter the GUIDE Plus+ system:
•
•
Press GUIDE on the remote.
Press and hold MENU for 2 seconds on the front
panel.
GUIDE
To exit the GUIDE Plus+ system:
•
•
•
Highlight a program and press OK to exit the GUIDE
Plus+ system and tune to the channel.
Press GUIDE to exit the GUIDE Plus+ system and
tune to the channel displayed in the video window.
CLEAR
Press CLEAR to exit the GUIDE Plus+ system and
return to the original channel.
The GUIDE Plus+ System Menus
The GUIDE Plus+ system offers seven different options
on the Menu bar: Grid, Sort, News, Schedule, Messages,
Channels and Setup. To access the Menu bar:
1. Press GUIDE to access the GUIDE Plus+ system.
2. Press MENU or use the up and down arrow buttons
to select the Menu bar (the Grid Guide appears by
default).
3. Use the left and right arrow buttons to access other
menus.
Press GUIDE on the
remote control to
see the GUIDE Plus+
system. To remove
the program guide
from the screen,
press OK, GUIDE, or
CLEAR.
4. Press OK, or MENU, or use the down arrow button to
see the menu options.
Grid Guide
The Grid Guide appears each time you enter the GUIDE
Plus+ system. It displays the current programming for
each channel. The current program is displayed in the
video window.
•
Press the up and down arrow buttons on the remote
to browse channel listings and the channel up and
down buttons to page through the listings. Use the
right and left arrow buttons to browse future program
listings.
•
To tune to a channel, highlight the program you want
to view in the channel listing and press OK. Press
CLEAR to exit the GUIDE Plus+ system and return to
the original channel. Press GUIDE to exit the GUIDE
Plus+ system and tune to the channel in the video
window.
Then use the Grid Guide Action Buttons as described next.
Chapter 2
23
15720240.02 Features
23
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Grid guide
action buttons
Grid guide
menu
selection
Grid Guide Action Buttons
Action buttons will change according to where you are in
the GUIDE Plus+ system. Be sure to look at the action
bar before pressing the command numbers.
When highlighting the program, the following Action
buttons appear:
•
Watch Press 1 on the remote to place a timer in the
Schedule for the TV to turn on and tune to the
program highlighted in the channel listing. When the
TV turns on, the GUIDE Plus+ system will
automatically appear with the scheduled program
highlighted and tuned in the video window.
•
Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. This will highlight the channel and current
program in the channel listing of the Grid Guide.
Press OK to tune to the highlighted channel. If the
video window is unlocked, it will automatically tune
to the channel.
•
Record Press 3 on the remote to place a timer in the
Schedule for the VCR to record the program
highlighted in the channel listing.
If you have a cable box, changing channels on the
TV will not cause the cable box channel to change
while recording.
Record will only appear if you have set up GUIDE
Plus+ system and specified your VCR type.
The program information window will display a
confirmation when you have successfully scheduled a
program to watch or record.
Note: If you have selected two programs to watch
or record which begin at the same time or
overlap, you will receive a timer conflict message.
You must choose between the two programs.
When highlighting the Channel names (the left column
on the channel listing), the following Action buttons
appear:
•
Lock/Unlock Press 1 to lock or unlock the video
window to either stay at one channel as you browse
the GUIDE Plus+ system (lock) or change as you
browse through different channels (unlock).
•
Go To Press 2 on the remote to bring up the direct
dial box and enter the number of the channel you
want. Press OK to highlight the channel and current
program in the channel listing of the Grid Guide. If
the video window is locked, press OK to tune to the
highlighted channel. If the video window is
unlocked, it will automatically tune to that channel.
24
Chapter 2
15720240.02 Features
24
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Sort menu
selection
Sort
The Sort menu lets you browse programs by category.
The channel to which you are currently tuned is
displayed in the video window.
To Sort:
1. If the GUIDE Plus+ system isn’t on your screen, press
GUIDE on your remote control.
2. Press MENU on the remote to select the Menu bar.
3. Use the arrows to highlight Sort. When Sort is
highlighted for the first time, the Movies category is
displayed. Thereafter, the last category used becomes
the default. A listing of subcategories is displayed
below the category name. Use the left and right
arrows to highlight other categories.
4. Use the up and down arrow buttons to highlight a
subcategory. For example, highlight All and press OK
(the GUIDE Plus+ system sorts the programs).
5. Press the up and down arrow buttons to review the
list one program at a time. Press the channel up and
down to review the list one page at a time.
Categories
6. Select MENU to return to the menu bar, or press
GUIDE or CLEAR to exit the GUIDE Plus+ system.
Then use the Sort Menu Action Buttons as described
next.
Sort Menu Action Buttons
When viewing the results of a Sort, the following Action
buttons appear:
•
Watch Press 1 on the remote to place a timer in the
Schedule, and then follow the on-line help for further
options. Placing a timer in the Schedule will cause
the TV to turn on and tune to the program
highlighted in the channel listing at the
predetermined time.
•
Record Press 3 on the remote to set the VCR to
record the program highlighted in the channel listing.
If you have a cable box, changing TV channels will
not cause the cable box channel to change while
recording.
The program information window will display a
confirmation when you have successfully created a timer
to watch or record.
Notes: If you have selected two programs to
watch or record which begin at the same time
or overlap, you will receive a timer conflict
message. You must choose between the two
programs.
Be sure that during the GUIDE Plus+ system
setup you specified that you have a VCR.
Chapter 2
25
15720240.02 Features
25
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
News menu
selection
News
The News menu lets you browse current news stories by
headline.
1. If the GUIDE Plus+ system isn’t on your screen, press
GUIDE on your remote control.
2. Press MENU on the remote control to select the Menu
bar.
3. Use the arrows to highlight News (if MSNBC is
available on your TV, it appears in the video window).
4. Use the up and down arrows to highlight a story.
• Use the up and down arrows to browse the list
one story at a time.
• Use the channel up and down to browse through
the list one page at a time.
5. Press the right arrow button to see full text.
6. If there are multiple pages of text, press the right or
left arrow button to page forward or back through
the pages of text. Press the down arrow to view the
next story.
7. Select MENU to return to the Menu bar, or press
GUIDE or CLEAR on the remote to exit the GUIDE
Plus+ system.
Schedule
Schedule menu
selection
The Schedule menu allows you to alter timers for either
viewing or recording programs. The GUIDE Plus+ system
allows one-touch VCR recording if you have connected
the G-LINK cable to your VCR. See Chapter 1 for more
details on connecting the G-LINK cable.
To schedule a program to watch or record:
1. If the GUIDE Plus+ system isn’t on your screen, press
GUIDE on your remote control.
2. Press MENU on the remote to select the Menu bar.
3. Highlight a program within the channel listing.
4. Select Watch or Record from the Action buttons bar.
The timer is then automatically logged into the
Schedule menu.
5. If you select Record, make sure to place a blank tape
in the VCR and turn it off.
Note: If you have a cable box connected to your
TV and VCR, tune your VCR to the cable box
output channel prior to turning off the VCR.
The program information window will display a
confirmation when you have successfully scheduled a
program to watch or record.
Note: If you have selected two programs to watch
or record which begin at the same time or overlap,
you will receive a timer conflict message. You
must choose between the two programs.
26
Chapter 2
15720240.02 Features
26
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
To remove or change the frequency (daily, once, or
weekly) of a scheduled event, access the Schedule menu
from the Menu bar.
1. Press GUIDE to bring up the GUIDE Plus+ system.
2. Press MENU on the remote to select the Menu bar.
3. Use the arrows to highlight the Schedule menu
selection.
4. Use the up and down arrows to highlight the program
you want to edit.
Then use the Schedule Menu Action Buttons as described
next.
Schedule Menu Action Buttons
When viewing the Schedule menu the following Action
buttons appear:
•
•
Remove Highlight the Watch or Record timer you
wish to remove from the schedule and press 1 on the
remote.
Change Highlight the Watch or Record timer you
wish to change and press 3 on the remote to toggle
the frequency between the following choices:
DAILY records the same program each day Monday
through Friday.
ONCE records only on that day.
WEEKLY records the program each week at the
same time.
Messages menu
selection
Messages
Occasionally you will receive messages regarding your
GUIDE Plus+ system, as well as special programming
information. You can access these messages from the
Messages menu on the Menu bar.
To read messages:
1. If your GUIDE Plus+ system isn’t on your screen,
press GUIDE on your remote control.
2. Press MENU on the remote to select the Menu bar.
3. Use the arrows to highlight the Messages menu
selection.
4. Highlight the message you want to read by using the
up and down arrow buttons.
5. Press INFO to display the full text of the message. If
the text continues beyond the screen, press INFO to
view the next page of text. Once you have reached the
end of the message, press INFO to close the expanded
information and return to the Messages screen.
Then use the Messages Menu Action Button as described
next.
Messages Menu Action Button
When viewing the Messages menu the following Action
button appears:
•
Remove Highlight the message you want to delete
and press 1 on the remote.
Chapter 2
27
15720240.02 Features
27
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Channels menu
action buttons
Channels menu
selection
Channels
You can customize the channel listing by enabling or
disabling the display of certain channels. For instance,
you may disable channels that you never watch. You can
restore disabled channels at a later point in time.
1. If the Guide Plus+ system isn’t on your screen, press
GUIDE on your remote control.
2. Press MENU on the remote to select the Menu bar.
3. Use the right and left arrows to highlight the
Channels menu selection.
4. Use the up and down arrows to select a channel.
Then use the Channels Menu Action Buttons as
described next.
Channels Menu Action Buttons
While browsing the Channels menu, the following Action
buttons appear:
•
•
•
Cancel Press 1 on the remote to cancel any changes
you made since entering the Channels Menu.
Change Press 2 on the remote to change the
channel number for the highlighted channel line.
On/Off Press 3 on the remote to toggle the state of
the channel between On and Off.
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup information. To access the Setup option:
1. If the Guide Plus+ system isn’t on your screen, press GUIDE on your remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review options, or View demo.
•
•
Change system settings Confirms the settings you completed in the GUIDE Plus+ system setup are correct.
Review options Displays the GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you press the POWER button on the remote control.
Off Disables the GUIDE Plus+ system from being displayed when you press the POWER button on the remote
control.
•
View demo Runs the GUIDE Plus+ system demonstration.
Note: If you have not completed your GUIDE Plus+ system setup, these options will not be available. A screen
will prompt you to complete your setup.
28
Chapter 2
15720240.02 Features
28
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
How to Get More Information About
an Advertisement or a Program
To find out more information about a program,
advertisement or special, use the left arrow button to
highlight the channel listing or promotional
information box.
Requesting more information about a particular show
displays the PlusCode programming number and the
Shows on Next for that channel.
Press the INFO button to exit the expanded information
screen.
Promotional information
GUIDE Plus+ Menu Items
TV MAIN MENU
The GUIDE Plus+ Menu gives you access to features in
the GUIDE Plus+ system. To access the GUIDE Plus+
Menu:
1 Picture Quality
2 Screen
3 Channel
1. Press MENU on the remote.
4 Time
2. Highlight GUIDE Plus+ Menu and press OK.
Each menu and the sub-menus are listed below:
5 Parental Controls
6 GUIDE Plus+ Menu
7 Setup
GUIDE Plus+ Setup Displays STEP 4: Confirming Your
Settings screen of the GUIDE Plus+ system setup.
GUIDE PLUS+ MENU
0 Exit
1 GUIDE Plus+ Setup
2 GUIDE Plus+ Label
3 Continuous Demo
0 Exit
Yes, everything is correct Confirms the settings
you completed in the GUIDE Plus+ system setup are
correct.
Yes, but my channel lineup is incorrect Displays
STEP 5: Choosing Your Channel Lineup screen,
allowing you to change your lineup if it is incorrect.
No, repeat setup process Begins the GUIDE Plus+
system setup.
GUIDE Plus+ Label Displays the GUIDE Plus+ label
menu.
On Displays the station name when you change
channels.
Off The station name isn’t displayed when you
change channels.
Continuous Demo Runs the GUIDE Plus+
demonstration until it is turned off. To turn off the
demonstration you must turn off the TV.
Note: If you have not completed your GUIDE
Plus+ system setup, these options will not be
available. A screen will prompt you to
complete your setup.
Chapter 2
29
15720240.02 Features
29
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Channel Banner
12:01
ESPN
60
There are several indicators that might appear when you
press the TV or INFO buttons on the remote. This display
is called the Channel Banner. The following list describes
the items on the Channel Banner screen (left to right and
top to bottom).
00:00
Sample displays on a Channel
Banner.
12:01
Displays the current time.
The lock is displayed to indicate when Parental Controls are locked or unlocked.
Displayed when Closed Captioning is available on the current channel.
Displays the label assigned to the current channel.
ESPN
60
Displays the current channel or input channel (FRNT).
Displayed when you mute the audio.
Displayed when the Sleep Timer has been set.
00:00
Displayed to count down time left on the commercial skip (SKIP) timer.
Parental Controls and V-Chip
TV MAIN MENU
1 Picture Quality
2 Screen
The Parental Controls menu allows you to program your
TV so that children cannot see certain programs,
channels, or use the front panel controls.
The first three choices in the Parental Controls menu
involve software inside your TV (referred to as V-Chip)
which allows you to block TV programs and movies
based on violence, sex, or other content you may believe
children should not view. In other words, it lets you
program your TV so it won’t display certain programs.
3 Channel
4 Time
5 Parental Controls
6 GUIDE Plus+ Menu
PARENTAL CONTROLS
7 Se
0 Ex
1 V-Chip TV Rating Limit
Once you block programs, you or other adults can
unblock programs by entering a password.
2V-Chip Movie Rating Limit
3V-Chip Unrated Program Block
4 Channel Block
By default, the software inside your TV is turned “off,” so
if you don’t want to use this feature, you can just ignore it.
5 Front Panel Block
6 Lock Parental Controls
0Exit
30
Chapter 2
15720240.02 Features
30
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
How V-Chip Works
When turned “on,” the V-Chip software reads a code that most broadcasters send with programs. That code tells the
software the program’s age-based rating (TV-MA, TV-14, etc.) and content themes [(Violence (V), Adult Language (L),
etc.)]. If you have blocked the rating and/or content themes that the program contains, you will receive the message,
“This channel is not approved for viewing,” when you tune to that particular channel.
Broadcasters are not required to provide content themes, so programs received with no content themes will only be
blocked if you block their age-based rating. You can also block out programs that have been given a rating of “Not
Rated,” and programs that are considered “unrated” because no code has been sent by the broadcaster. The TV age-
based ratings and content themes you can block are listed in the following table.
Age-Based
Description and Content Themes for Age-Based Ratings
Rating
Mature Audience Only. Specifically designed to be viewed by adults and may be unsuitable for children
under 17. It contains one or more of the following content themes: crude indecent language (L), explicit
TV-MA
sexual activity (S), or graphic violence (V).
Parents Strongly Cautioned. Contains some material that many parents would find unsuitable for children
under 14. Parents are strongly urged to exercise greater care in monitoring this program and are cautioned
TV-14
against letting children under the age of 14 watch unattended. This program contains one or more of the
following content themes: intensely suggestive dialogue (D), strong coarse language (L), intense sexual
situations (S), or intense violence (V).
Parental Guidance Suggested. Contains material that parents may find unsuitable for younger children. Many
parents may want to watch it with their younger children. The program contains one or more of the following
content themes: some suggestive dialogue (D), infrequent coarse language (L), some sexual situations (S), or
moderate violence (V).
TV-PG
General Audience. Most parents would find this program suitable for all ages. It contains little or no sexual
dialogue (D) or situations (S), no strong language (L), and little or no violence (V).
TV-G
Directed to Children 7 years and older. Designed for children ages 7 and above. It may be more
appropriate for children who have acquired the developmental skills needed to distinguish between make-
believe and reality. Themes and elements in this program may include mild fantasy violence (FV) or comedic
TV-Y7
violence, or may frighten children under the age of 7.
All Children. Themes and elements in this program are designed for a young audience, including children
from ages 2-6. It is not expected to frighten younger children.
TV-Y
Chapter 2
31
15720240.02 Features
31
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
V-Chip TV Rating Limit
TV MAIN MENU
The V-Chip TV Rating Limit lets you decide which TV
programs can and cannot be viewed. To set TV
programming limits:
1 Picture Quality
2 Screen
3 Channel
4 Time
5 Parental Controls
1. Choose Parental Controls from the Main menu. If
Parental Controls have previously been locked, you
must enter your password. If they are not locked, you
will get a message reminding you that your limits will
not be effective until you lock Parental Controls.
6
PARENTAL CONTROLS
7
1 V-Chip TV Rating Limit
0
2. Press MENU to continue.
2
V-CHIP TV RATING LIMIT
3. Highlight and select V-Chip TV Rating Limit.
3--Content - -
Rating
Status
D L S V FV
V V V
4. Once you get to the V-Chip TV Rating Limit screen,
use the arrow buttons and OK on your remote to
change the status of a TV program rating or content
theme from View to Block.
4
TV-MA
VIEW
^
5
Press ^/v to select rating.
6
Press MENU to exit.
0
D L S V FV
V V V
V V V V
V V V V
RATING
TV-MA
TV-14
TV-PG
TV-G
STATUS
View
View
View
View
View
View
The following sections give you more details about how
to change the status of TV program limits.
V
TV-Y7
TV-Y
The V-Chip Rating Limit Screen
The following is an example of where items are located within the Rating Limit screen.
Rating Status Field
Lets you select whether the status of the age-based rating limit to the left is View or Block.
Content Themes
Lists the content
themes you can
block or view.
V-CHIP TV RATING LIMIT
- - Content - -
Rating Status
D L S V FV
V V V
TV-MA VIEW
Rating Field
Lets you select
from a list of
age-based
ratings you can
block or view.
Content Status
Fields
^
Press ^/v to select rating.
Lets you select
which content
themes to view for
the selected rating,
and whether the
status of the
content theme is
currently View (V)
or Block (B).
Press MENU to exit.
D L S V FV
RATING STATUS
V V V
V V V V
V V V V
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
View
View
View
View
View
View
V
Rating Settings Area
Lets you see the current block/view state of age-based ratings and associated content. The View
(V) settings are coded in green, and the Block (B) settings are coded in red.
32
Chapter 2
15720240.02 Features
32
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Rating
field
Rating
status field
Blocking Age-Based Ratings
Content
status fields
You can automatically block all program ratings above a
specified age-based rating level. For example, if you only
want your child to watch programs that have a TV-G
rating and lower (in other words, you want the child to
watch TV-G, TV-Y7, and TV-Y), then you need to block
out other programming with higher ratings.
V-CHIP TV RATING LIMIT
- - Content - -
Rating
TV-PG
Status
D L S V FV
B B B B
Block
^
To block programs with higher ratings:
Press ^/v to view programs with
this rating. Press MENU to exit.
RATING
TV-MA
TV-14
TV-PG
TV-G
1. First, determine the lowest level rating you don’t
want the child to watch (see chart of age-based
ratings on next page).
D L S V FV
B B B
B B B B
B B B B
STATUS
Block
Block
Block
View
View
View
2. Press the left and right arrow buttons to highlight the
Rating field.
3. Press the up and down arrow buttons on the remote
to scroll through the age-based rating limits. Keep
scrolling until the rating corresponding with the
lowest rating you do not want the child to watch
appears on the screen.
V
TV-Y7
TV-Y
In the example discussed above, you would scroll
through the Rating field until TV-PG appears, since the
highest rating you want the child to watch is TV-G.
Tip
When you change the status of a rating to Block,
the system will automatically block higher ratings
and all corresponding content themes.
4. Press the right arrow button to move the yellow
highlight to the Status field.
5. Press the up or down arrow button to toggle between
View and Block. The status for the rating listed to the
left and all higher ratings automatically changes to
Block (and B).
Hierarchy of Age-Based Ratings
6. Press OK on the remote to return to the menu or exit
the screen when you are finished.
7. Select Lock Parental Controls from the Parental
Controls menu. Enter a password, and if you have
not already set your password, you will be prompted
to enter it again to confirm.
TV-MA
TV-14
Mature Audience Only
Parents Strongly Cautioned
TV-PG
TV-G
Parental Guidance Suggested
General Audience
TV-Y7
Directed to Children 7 years
and older
TV-Y
All Children
Chapter 2
33
15720240.02 Features
33
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Viewing Age-Based Ratings
After you block age-based ratings, you have the option of
changing some of the ratings back to View.
Rating
field
Content
themes
Rating
status field
1. Determine which blocked rating you want to view.
V-CHIP TV RATING LIMIT
- - Content - -
2. Use the up and down arrow buttons to select the
Rating
TV-14
Status
D L S V FV
V V V V
rating with a status of Block.
View
^
3. Press the right arrow button to move the yellow
highlight to the rating status field.
Press ^/v to view programs with
this rating. Press MENU to exit.
4. Press the up button to select View.
D L S V FV
B B B
V V V V
B B B B
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
Block
View
Block
View
View
View
Notes: The content status fields corresponding
to the unblocked rating become View as well.
They and the age-based rating status are the
only fields that automatically change back to
View when you complete this process.
V
You must remember to lock Parental Controls
for rating limits to take effect.
Blocking Specific Content Themes
Content Themes
You can block programs based on their content. (Content
is represented by the D, L, S, V, FV and TV-Y on your
screen. See the beginning of this section for details.)
When you block a content theme for a particular rating,
you automatically block that content theme for higher
rated programs as well.
D
Sexually explicit dialogue
Adult language
Sexual situations
Violence
L
For example, if you do not want your child to watch
programs that have adult language (L) rated TV-PG or
higher, then you could block out all programming TV-PG
and above containing adult language.
S
V
To block program content:
FV
TV-Y
Fantasy Violence
All Children
1. Determine the lowest level of content you don’t want
the child to watch.
2. Use the up and down arrow buttons on the remote to
scroll through the age-based ratings until the rating
that corresponds with the lowest content you do not
want the child to watch appears. (In the example
above, you would scroll through the ratings until the
TV-PG rating appeared.)
Rating
field
Rating
status field
Content
themes
3. Press the right arrow button to move the highlight to
the field corresponding with the content theme you
want to block out.
V-CHIP TV RATING LIMIT
4. Press the up or down arrow button to change content
status from V to B.
- - Content - -
Rating
TV-PG
Status
View
D L S V FV
All higher ratings’ content theme will automatically
change to B.
V B V V
^
Press ^/v to view programs with
this content for this rating.
5. Press OK to return to the menu or exit the screen.
D L S V FV
B V V
V B V V
V B V V
Notes: Broadcasters are not required to provide
content themes or age-based ratings. Programs
received with no content themes will only be
blocked if you block their age-based rating.
RATING
TV-MA
TV-14
TV-PG
TV-G
TV-Y7
TV-Y
STATUS
View
View
View
View
View
View
V
You must remember to lock Parental Controls
for rating limits to take effect.
Content
status fields
34
Chapter 2
15720240.02 Features
34
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Rating
field
Content
themes
Rating
status field
Viewing Specific Content Themes
If you block specific content themes, you have the option
of going back and changing some of the content themes
back to (V) View:
V-CHIP TV RATING LIMIT
- - Content - -
Rating
TV-14
Status
View
D L S V FV
1. Determine the content themes you want to change to
(V) View.
V V V V
^
2. Use the up and down arrow buttons to scroll through
the age-based ratings until the rating whose content
theme you want to change to View appears.
Press ^/v to view programs with
this content for this rating.
RATING
TV-MA
TV-14
TV-PG
TV-G
D L S V FV
B V V
V V V V
V B V V
STATUS
View
View
View
View
View
View
3. Press the right arrow button to move the yellow
highlight to a particular content theme status, such as
the B under language (L) corresponding with TV-14.
4. Press the up or down arrow button to change its
status back to V. Your child would then be able to
watch programs with TV-14 adult language content,
but not programs with TV-PG or TV-MA language
content.
V
TV-Y7
TV-Y
Content status
fields
Note: Only the content theme status
corresponding to TV-14 (L) language changes
to (V) View. Higher rated content themes, such
as that for TV-MA language, do not change.
V-Chip Movie Rating Limit
PARENTAL CONTROLS
You set movie rating limits by blocking movies rated
above a specified level. How to block movie ratings and
view movie ratings is explained in the next two sections.
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3V-Chi
To access the V-CHIP MOVIE RATING LIMIT menu:
V-CHIP MOVIE RATING LIMIT
4 Chann
Rating
Status
1. Press MENU on the remote control (the TV MAIN
5 Front
MENU appears).
PG-13
Block
^
6 Lock
2. Select Parental Controls (press 5).
Press ^/v to view programs with
this rating. Press MENU to exit.
0Exit
3. Select V-Chip Movie Rating Limit (press 2).
RATING
NR
STATUS
Block
Block
Block
Block
Block
View
X
NC-17
R
PG-13
PG
G
View
Chapter 2
35
15720240.02 Features
35
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Rating
status field
Rating
field
Blocking Movie Ratings
If you only want your child to watch movies that have a
PG rating and lower (in other words, movies rated PG
and G), then you could automatically block out all other
movies with higher ratings.
V-CHIP MOVIE RATING LIMIT
Rating
PG-13
Status
Block
To block movies:
^
1. Highlight the Rating field and press the up and down
arrow buttons to find the rating that is the lowest
rating you don’t want the child to watch. (In the
example above, you would highlight the rating status
button corresponding to PG-13, since the highest
rating you want the child to watch is PG.)
Press ^/v to view programs with
this rating. Press MENU to exit.
RATING
NR
STATUS
Block
Block
Block
Block
Block
View
X
NC-17
R
2. Press the right arrow button to highlight the rating
Status field. Press the up and down arrow buttons to
change the button from View to Block. All higher
ratings automatically change to Block.
PG-13
PG
G
View
3. Press OK to return to the menu or exit the screen.
4. If Parental Controls are not locked, you must lock
them so the movie rating limits will take effect.
Note: Some movies may be given a Not Rated
(NR) rating. After blocking movie ratings, you
must set NR to View separately to view NR
movies.
Rating
status field
Viewing Movie Ratings
After you block movie ratings, you have the option of
changing some of the rating status buttons back to View:
Rating
field
V-CHIP MOVIE RATING LIMIT
1. Highlight the Rating field and press the up and down
Rating
NC-17
Status
arrow buttons to find the rating you want to view.
View
2. Press the right arrow button to highlight the rating
Status field. Press the up and down arrows to change
the button from Block to View.
^
Press ^/v to block programs with
this rating. Press MENU to exit.
RATING
NR
STATUS
Block
Block
View
For example, if movies with a rating of PG-13 and higher
are blocked, you can change the rating status
corresponding with NC-17. Your child would then be
X
NC-17
R
PG-13
PG
G
able to watch all movies with a G, PG, and NC-17 Rating.
Block
Block
View
3. Press OK to exit the screen, and be sure parental
controls are locked.
View
36
Chapter 2
15720240.02 Features
36
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
V-Chip Unrated Program Block
PARENTAL CONTROLS
Selecting this option lets you decide if programs that the
V-Chip recognizes as “unrated” can be viewed. Note that
“unrated” TV programs may include news, sports,
political, religious, local and weather programs,
emergency bulletins, public announcements, and
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Chan
V-CHIP UNRATED PROGRAM BLOCK
programs without ratings.
5 Fron
View All unrated programs are available.
Block All unrated programs are not available.
6 Lock
1 View
0Exit
2 Block
Note: You must remember to lock Parental
Controls for rating limits to take effect.
Channel Block
PARENTAL CONTROLS
Selecting this option lets you decide what channels can
be viewed.
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
View Makes the selected channel viewable.
Block The front panel and remote control CH
(channel) buttons will tune only to channels that you
have marked as View. The remote will still tune to
the blocked channel if you use the digits to access
the channel, but the channel will be blocked.
5 Fron
CHANNEL BLOCK
6 Lock
Channel #
Status
0Exit
59
^
HEADLN Block
Don’t forget to lock parental controls after you change
the status of Channel Block. If you do not, the channel
block will not take effect.
Press ^ or v, keypad, or CH ^/v
to set channel, MENU to exit.
Note: If you have a digital cable box channels
126-999 can be blocked but will not be
removable from your scan list.
Front Panel Block
PARENTAL CONTROLS
Selecting this option lets you block (disable) or unblock
(enable) the TV’s front panel. The remote still tunes to
any channel. Front Panel Block can:
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
•
Keep children from watching TV when the parent is
not present.
5 Front Panel Block
•
Keep young children from playing with the buttons.
6 Lock Parental Controls
FRONT PANEL BLOCK
0Exit
(When using this as a Parental Control method, you
should remove access to any remote that is capable of
operating the television while you have the front panel
blocked.)
1 Unblock
2 Block
Don’t forget to lock parental controls after you change
the status. If you do not, the front panel block will not
take effect.
Chapter 2
37
15720240.02 Features
37
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Features
Lock/Unlock Parental Controls
PARENTAL CONTROLS
Selecting this option lets you lock and unlock parental
controls settings using a password.
1 V-Chip TV Rating Limit
2 V-Chip Movie Rating Limit
3 V-Chip Unrated Program Block
4 Channel Block
5 Front Panel Block
6 Lock Parental Controls
0Exit
If you do not lock parental controls, none of the
settings for V-Chip, Channel Block, or Front Panel
Block will take effect.
If you forget your password, simultaneously press and
hold VOL- on the television and VOL- on the remote for
3 seconds. Nothing appears on the screen, Parental
Controls simply unlock and you can re-enter a password
via Lock Parental Controls.
38
Chapter 2
15720240.02 Features
38
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Using the TV’s
Menu System
Chapter Overview:
•
•
•
•
How to Use the Different Types of Menus and Control Panels
Picture Quality Menu
Screen Menu
Using Closed Captioning
• Channel Menu
Time Menu
•
Changing Entertainment. Again.
Graphics contained within this publication are for representation only.
39
15720240.03 Menu
39
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Menu System
How to Use the Different Types of Menus and Control Panels
The TV’s menu system has three types of screens: menus, control panels, and choice lists. You use the buttons on the
remote or the front panel to access the menu system and make changes to the settings.
The following pages explain how to use the different types of menus to adjust the features of your TV.
Menus
TV MAIN MENU
1 Picture Quality
2 Screen
3 Channel
The first menu is called the Main menu. Press MENU on
the remote or on the front panel to bring up the Main
menu. Note that holding MENU for 2 seconds displays
the GUIDE Plus+ system.
4 Time
Menus take you to another menu or a control panel.
There are two ways to select a choice in a menu:
5 Parental Control
6 GUIDE Plus+ Menu
7 Setup
•
Use your arrow buttons on your remote control to
highlight your choice, and press OK.
0 Exit
•
Press a number button on the remote. For example,
in the Main menu press 2 to go straight to the Screen
menu.
Tip
Exiting a menu
Feel free to explore the menu system. If you’re
ever unsure where you are in the menu system, or
you’re just plain tired of exploring, press CLEAR to
remove the menus from the screen and start over
again.
There are three ways to exit a menu:
•
•
•
Highlight Exit and press OK.
Press 0 on the remote.
Press CLEAR. The on-screen displays are cleared from
the screen and you return to TV viewing.
Control Panels
Control panels allow you to adjust the default settings on
many features of your TV. You can choose a setting,
enter a number, or adjust a level such as tint or
brightness. There are three types of control panels:
sliders, numeric entry and choice lists.
40
Chapter 3
15720240.03 Menu
40
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Menu System
Sliders
BASIC PICTURE CONTROLS
Sliders are used to make adjustments to a particular
control.
Contrast
Color
Tint
Black Level
Sharpness
Press MENU to exit.
To use a Slider in a menu:
1. Press the up or down arrow button to select the
slider control for the feature you want to adjust.
2. Press the right or left arrow button to adjust the
indicator line on the slider.
Numeric Entry
A numeric entry control panel is used to enter numbers
or letters.
A pointer appears underneath the column you are
changing.
SET TIME
:
1. Use the digits to enter a number in the column above
the pointer.
AM
Enter01to12forthehour.
Press MENU to exit.
2. Press the right arrow button to move to the next
column, then use the digits to enter a number.
3. When you have finished entering information, press
MENU or OK.
Tip
If the control panel is not set to the current time,
use the arrows to go back over the columns and
the digits to make changes.
You can also enter numbers by using the up and
down arrows on the remote.
Choice Lists
CLOSED-CAPTION MODE
Choice lists are used to choose a particular setting from a
list. When the choice list appears, the highlighted item is
the one that is currently selected, or “in use.”
1 CC1
2 CC2
3 CC3
4 CC4
Highlight a choice on a menu and press OK to select that
choice. You will then return to the previous screen.
5 Text 1
6 Text 2
7 Text 3
8 Text 4
Now that you know how to access the menus and adjust
the control panels the following pages provide a brief
explanation of all the menu features. The features are
organized in order of their location on the Main Menu.
Chapter 3
41
15720240.03 Menu
41
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Menu System
Picture Quality Menu
TV MAIN MENU
Basic Picture Controls Displays the five slider controls
1 Picture Quality
2 Scr
for adjusting the way the picture looks.
PICTURE QUALITY
Contrast Adjusts the difference between the light
and dark areas of the picture.
3 Cha
1 Basic Picture Controls
4 Tim
Color Adjusts the richness of the color.
2 Picture Presets
5 Par
3 Color Warmth
6 GUI
Tint Adjusts the balance between the red and green
levels.
0 Exit
7 Set
0 Exi
Black Level Adjusts the brightness of the picture.
Sharpness Adjusts the crispness of the edges in the
picture.
When exiting this menu, the Save Personal Picture Preset
choice list will appear. You can choose either Yes or No.
If you save the settings as a Personal Picture Preset, the
TV will store the settings so you can re-select them
quickly if someone changes the settings.
Picture Presets Displays a choice list that lets you
select one of four preset picture settings: Bright Lighting,
Normal Lighting, Soft Lighting or Personal Picture Preset.
Choose the setting that is best for your viewing
environment.
Color Warmth Displays a choice list that lets you set
one of three automatic color adjustments: Cool for a more
blue palette of picture colors; Normal; and Warm for a
more red palette of picture colors. The warm setting
corresponds to the NTSC standard of 6500 K.
Screen Menu
TV MAIN MENU
Closed-Caption Display Displays a choice list that lets
you choose the way closed captioning information is
shown on the screen.
1 Picture Quality
2 Screen
Off always No captioning information is displayed.
3 Channel
SCREEN
4 Time
On always Captioning information is shown
always, when available.
5 Parent
1 Closed-Caption Display
6 GUIDE
On when sound is muted Captioning information
is shown, when available, whenever the TV’s sound
is muted. (To mute the sound, press the MUTE
button.) The captioning information is not displayed
when the sound is not muted.
2 Closed-Caption Mode
3 Menu Language
0 Exit
7 Setup
0 Exit
Closed-Caption Mode Displays a choice list that lets
you choose which captioning mode is used for displaying
captioning information.
Menu Language Displays a choice list that lets you
select your preferred language for the menus: English,
Spanish or French.
42
Chapter 3
15720240.03 Menu
42
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Menu System
SCREEN
Using Closed Captioning
Many programs are encoded with closed-captioning
information, which lets you display the audio portion of
1 Closed-Caption Display
2 Closed
3 Menu L
CLOSED-CAPTION MODE
a program as text on the TV screen.
Closed captioning is not available on all channels at all
times. Only specific programs encoded with closed-
captioning information are applicable. When a program
is closed captioned, the letters CC are displayed in the
channel banner. See Chapter 2 for more information
about the channel banner.
1 CC1
2 CC2
3 CC3
4 CC4
5 Text 1
6 Text 2
7 Text 3
8 Text 4
0 Exit
Closed-Caption Modes
The TV offers eight closed-captioned modes, including
four text modes.
To set the Closed-Caption Mode:
1. Select Screen from the Main menu.
2. Highlight Closed-Caption Mode and press OK (the
Closed-Caption Mode appears).
3. Highlight your choice and press OK (the Screen
menu appears again).
Note: The Text modes cover nearly half of the
picture on the screen to display the closed-
captioned text. Most broadcasters use the CC
mode, which displays a few lines of captions
at a time.
Tip
Turning off Closed-Caption
If you don’t know which Closed-Caption mode to use, select
CC1. CC1 is probably the mode that is used in your area. CC2,
CC3, and CC4 are reserved for foreign languages, but are
rarely used at this time.
1. Select Screen from the Main menu.
2. Press OK to select Closed-Caption Display.
3. Highlight Off Always and press OK. The closed
captioning is turned off and you go back to the
Screen menu.
Chapter 3
43
15720240.03 Menu
43
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s Menu System
Channel Menu
TV MAIN MENU
Signal Type Displays a choice list that lets you select
1 Picture Quality
2 Screen
3 Channel
the current antenna type. This option does not appear
when the GUIDE Plus+ system is set up.
UHF/VHF Antenna Choose this if you are currently
using an off-air antenna for TV signals.
4 Time
5 Parent
CHANNEL
Cable TV Choose this if you are currently using
cable or a cable box for TV signals.
6 GUIDE
1 Signal Type
7 Setup
0 Exit
2
Auto Channel Search
Auto Channel Search Tells the TV to search
automatically for all the channels available through the
antenna input. When the TV finds an active channel, it
places it in the Normal channel list; inactive channels
(weak stations or channels with no signal at all) will be
removed from the channel list. If you are using a cable
box and have set up the GUIDE Plus+ system, this option
does not appear.
3 List and Labels
4 Auto Tuning
0 Exit
List and Labels Displays a control panel that lets you
edit your Normal channel list and choose a six-character
label for each channel. Follow the on-screen directions to
enter your channels and other information.
Channel # Use the up and down arrows to scroll
up and down through the channels available via your
antenna. You can enter the channel number directly
using the number buttons.
Normal List Only the channels included in the
Normal list are available when you scan up and
down using channel up and down. Use the up and
down arrow buttons to indicate whether the channel
number indicated is included (Yes) or is not included
(No) in the Normal channel list.
Tip
To enter a number greater than 99, press and hold “1” to enter
the hundreds digit, then press the two remaining numbers.
Channel Label Use the up and down arrow buttons
to enter a six-character label for each channel. Hold
the button down to scroll quickly through the
characters. The TV can store up to 27 labels in
memory.
Auto Tuning Displays a choice list that lets you set up
the TV to automatically tune to the correct input channel
when you press a component button (VCR1, VCR2, or
SAT•CABLE) if you are using a universal remote. Go to
Chapter 4 for information on ordering a universal remote.
Time Menu
TV MAIN MENU
Sleep Timer Displays a control panel that lets you
select the amount of time you want to give the TV before
it shuts itself off.
1 Picture Quality
2 Screen
3 Channel
Schedule Displays a control panel that lets you set up a
schedule for turning the TV on and off automatically.
Reminder: you must turn the schedule On. The on-screen
directions guide you through the steps needed to set the
schedule.
4 Time
5 Par
TIME
6 GUI
1 Sleep Timer
7 Set
2 Schedule
0 Exi
Set Time Displays a control panel that lets you enter the
current time. The on-screen directions guide you through
the steps needed to set the time. If your GUIDE Plus+
system is set up, it will automatically update your time
and this option will not appear.
3 Set Time
0 Exit
44
Chapter 3
15720240.03 Menu
44
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Other Information
Chapter Overview:
•
•
•
•
•
•
Troubleshooting
Care and Cleaning
Limited Warranty
Accessory Order Form
Glossary
Index
Changing Entertainment. Again.
Graphics contained within this publication are for representation only.
45
15720240.04 Other
45
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
Most problems you encounter with your TV you can correct by consulting the Troubleshooting list that follows.
TV Problems
TV won’t turn on
• Press the POWER button.
• Make sure the TV is plugged in.
• Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.
• Something might be wrong with your remote control. Press the POWER button on the front of the TV.
If the TV turns on, check the remote control solutions on page 48.
• The front panel buttons may be locked (disabled). Use the remote control to unlock the front panel
controls by selecting the Front Panel Block in the Parental Controls menu and choosing Unblock.
Buttons don’t work
• The front panel buttons may be locked (disabled). Use the remote control to unlock the front panel
controls by selecting the Front Panel Block in the Parental Controls menu and choosing Unblock.
• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.
TV turns off while playing
• Scheduled Off function may have been activated. Go to page 44 for instructions.
• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and
then turn the TV on again. If this happens frequently, the voltage in your house may be abnormally
high or low.
TV turns on unexpectedly
• Scheduled On or Watch from the GUIDE Plus+ system may have been activated. Go to page 26 or 44
for instructions.
Blank screen
• Make sure the component connected to the TV is turned on.
• Try another channel.
No sound, picture okay
• Maybe sound is muted. Press the volume up button to restore sound.
Can’t select certain channel
• Channel may be blocked or not approved in the Parental Controls menu.
• If using a VCR, make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR
button on your VCR).
Noisy stereo reception
• The station might be weak.
46
Chapter 4
15720240.04 Other
46
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Troubleshooting
No picture, no sound but TV is on
• Maybe the cable/air setting is set to the wrong position. Select GUIDE Plus+ Menu from the Main
menu, select the Setup option, and provide the correct information on the following screens. Go to
pages 16-17 for detailed instructions.
• The channel might be empty — change channels.
• If you’re watching your VCR and it’s connected with coaxial cable to the ANTENNA jack, tune the TV
to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also
check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button
on your VCR).
Sound okay, picture poor
• Check antenna connections. Make sure all of the cables are firmly connected to the jacks.
• Try adjusting sharpness function to improve weak signals. Go to page 42 for more instructions.
Black box appears on the screen
• Closed-captioning might be on. Check the Closed-Caption Display control panel in the Screen menu.
Go to page 42 for more instructions.
Every time I turn on the TV, the Guide is on the screen
• The GUIDE Plus+ system automatically appears on the screen when you use the POWER button on
the remote to turn on the TV. You can turn off this feature by pressing GUIDE on your remote control
and then press MENU to select the Menu bar. Press the right arrow button to select Setup. Choose
Review options and select OFF.
GUIDE Plus+ System Problems
GUIDE Plus+ setup won’t switch to channel 9 for VCR and/or channel 02 cable box
• Check to see if the G-LINK wands are positioned correctly in front of components’ remote sensors.
• GUIDE Plus+ system control of cable box is slower than direct control of the box itself. Keep this in
mind when changing channels.
• You may have an incorrect GUIDE Plus+ Channel Lineup. The guide may get out of sync with the
cable provider. Use the GUIDE Plus+ Setup in the GUIDE Plus+ Menu to change the zip code to 99999.
Turn the TV off for 10 minutes. Use Setup again to change the zip code back to the correct value. If
asked, be sure to select the correct channel lineup from the on-screen list.
Program information doesn’t download
• Review your setup information and make sure it’s correct. Press MENU on the remote and select
GUIDE Plus+ Setup. Go to page 16 for detailed instructions about the GUIDE Plus+ Setup menus.
• The TV must be off to download information. Leave your TV off overnight, for at least 10 hours, to
receive the initial download for your area.
• If you’re using a cable box, leave it on so you can receive program information.
(Continued on next page)
Chapter 4
47
15720240.04 Other
47
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Scheduled Watch or Record doesn’t occur
• Check Schedule for timer conflicts. Go to page 26 for instructions.
• Make sure the wands of the G-LINK cable are placed in front of the remote sensor(s) on the
component(s).
• Make sure your VCR is turned off during the time you’ve scheduled to record a program because the
system turns the VCR on when it starts recording (if it’s already on when recording starts, the system
will turn it off).
• Make sure there is a tape in the VCR and that the VCR is connected properly.
• Be sure that you set up the VCR in the GUIDE Plus+ Setup menus. If you don’t complete the
Configuring for a VCR steps successfully, the Record option won’t be available. Go to page 18 for
detailed instructions.
• If a cable box is attached to your TV, make sure you set it up correctly in the GUIDE Plus+ Setup
menus. Go to page 16-17 for detailed instructions.
The Remote Control Doesn’t Work
• Something might be between the remote and the remote sensor on the component. Make sure there is
a clear path.
• Maybe the remote isn’t aimed directly at the component (TV or VCR) that you’re trying to operate.
• Maybe batteries in remote are weak, dead or installed incorrectly. Put new batteries in the remote.
• You might need to drain the remote’s microprocessor: remove batteries and press the number 1
button for at least 60 seconds. Release the 1 button, replace the batteries, and (if necessary) program
the remote again.
Problems with V-Chip/Parental Controls
The rating limits don’t work
• You must lock the settings. Go to the TV MAIN MENU (press MENU on your remote), select Parental
Controls (press 5 on your remote), select Lock Parental Controls (press 6 on your remote).
I don’t remember my password and I want to unlock the TV
• If you forget your password, simultaneously press and hold VOL- on the television and VOL- on the
remote for 3 seconds. Nothing appears on the screen, Parental Controls simply unlock and you can
re-enter a password via Lock Parental Controls.
The V-Chip won’t let me watch a program even though it’s not rated as violent.
• Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must set NR
to View separately in order to view movies with an NR rating.
48
Chapter 4
15720240.04 Other
48
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the
cabinet to help assure adequate ventilation.
The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen.
If necessary, you may use a cloth dampened with warm water. Never use strong cleaning agents, such as
ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV.
Also, avoid placing drinks or vases with water on top of the TV. This could increase the risk of fire or shock hazard or
damage to the TV.
Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to
be permanently imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program logos,
phone numbers, etc. may cause similar damage. This damage is not covered by your warranty.
Limited Warranty
What your warranty covers:
•
Defects in materials or workmanship.
For how long after your purchase:
•
•
•
90 days from date of purchase for labor charges.
One year from date of purchase for parts.
Two years from date of purchase for the picture tube.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm,
whichever comes first.
What we will do:
•
Pay any Authorized RCA Television Service Center the labor charges to repair your television.
•
Pay any Authorized RCA Television Service Center for the new or, at our option, refurbished replacement parts and
picture tube required to repair your television.
How you get service:
•
For screen sizes of 26” and smaller: Take your RCA television to any Authorized RCA Television Service Center and
pick up when repairs are complete.
•
For screen sizes larger than 26”: Request home or pick up, repair, and return service from any Authorized RCA
Television Service Center, provided that your television is located within the geographic territory covered by an
Authorized RCA Television Service Center. If not, you must take your television to the Service Center location at
your own expense, or pay for the cost the Service Center may charge to transport your television to and from your
home.
•
•
To identify your nearest Authorized RCA Television Service Center, ask your dealer, look in the Yellow Pages, or call
1-800-336-1900.
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the product is within the
warranty period must be presented to obtain warranty service. For rental firms, proof of first rental is also required.
Chapter 4
49
15720240.04 Other
49
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
What your warranty does not cover:
•
Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your television. Any
additional information should be obtained from your dealer.)
•
•
•
•
•
•
•
Installation and related adjustments.
Signal reception problems not caused by your television.
Damage from misuse or neglect.
Batteries.
Customer replacement fuses.
Images burnt onto the screen.
A television that has been modified or incorporated into other products or is used for institutional or other
commercial purposes.
•
•
A television purchased or serviced outside the U.S.A.
Acts of nature, such as but not limited to lightning damage.
Product Registration:
•
Please complete and mail the Product Registration Card packed with your TV. It will make it easier to contact you
should it ever be necessary. The return of the card is not required for warranty coverage.
Limitation of Warranty:
•
•
THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY THOMSON MULTIMEDIA INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A
GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. THOMSON MULTIMEDIA INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED
WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT
PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET
FORTH ABOVE.
How state law relates to this warranty:
•
Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how
long an implied warranty lasts, so the above limitations or exclusions may not apply to you.
•
This warranty gives you specific legal rights, and you also may have other rights that vary from state to state.
If you purchased your product outside the United States:
This warranty does not apply. Contact your dealer for warranty information.
•
Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such
service calls are the sole responsibility of the purchaser.
50
Chapter 4
15720240.04 Other
50
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Screw-on Cable
attaches to the round
antenna connectors
(called 75-ohm F-type)
on the back of your
VCR or TV. The ends
screw onto the
Accessory Order Form
VH81 (3-ft)
VH82 (6-ft)
Price
Part No.
Description
Qty
Screw-on antenna cable (3-ft)
Screw-on antenna cable (6-ft)
Push-on antenna cable (6-ft)
Monaural VCR Dubbing Cable (6-ft)
Stereo VCR Dubbing Cable (6-ft)
2-way Signal Splitter
VH81
VH82
VH89
VH83
VH84
VH47
$3.95
$4.95
$5.95
$5.95
$9.95
$3.95
connectors for a secure
connection.
Push-on Cable
attaches to the round
antenna connectors
(called 75-ohm F-type)
on the back of your
VCR or TV. Ends push
on for a quick
VH89 (6-ft)
Amplified Antenna
ANT200 $49.95
193984 $11.15
242778 $19.35
connection.
Antenna Mixer (not shown)
Remote Control (CRK17TA1)
Audio•Video Adapter (not shown)
Monaural VCR
Dubbing Cable
Double cable that lets
you connect the video
and audio jacks of two
VHS VCRs to duplicate
tapes. Can also be
used to connect a VCR
to your TV. Cable is
color-coded and
228449
$4.45
Optional Remote Control (CRK76TE1) 242524 $30.35
Gold-Tipped
cable
VH83 (6-ft)
shielded. Has RCA-
type phono plugs on
each end.
Prices are subject to change
without notice.
Stereo VCR
Dubbing Cable
Triple cable that lets
you connect the VIDEO
and AUDIO jacks of
stereo components.
$
$
Total Merchandise.........................
Sales Tax .........................................
We are required by law to collect
the appropriate sales tax for each
individual state, country, and
locality to which the merchandise
is being sent.
Gold-Tipped cable
VH84 (6-ft)
$
$
5.00
Shipping and Handling ................
Total Amount Enclosed ................
2-way Signal Splitter
Helps you connect a
second TV or VCR.
Use VISA, MasterCard, or Discover
Card preferably.
Splitter VH47
Money order or check must be in
U.S. currency only.
No COD or CASH.
All accessories are subject to availability.
Where applicable, we will ship a
superseding model.
Please complete other side also
Continued on next page.......
Chapter 4
51
15720240.04 Other
51
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Amplified Antenna
Charge your order on your VISA,
MasterCard, or Discover Card by
filling in below
Allows you to quickly
switch from the antenna
signal to the cable or
satellite signal without
disconnecting the
antenna.
USE YOUR CREDIT CARD
®
IMPORTANT: Copy complete account number
from your VISA card
ANT200
POWER
Remote Control
GO
BACK
My card expires:
VOL
CHAN
INFO
MUTE
GUIDE
This is the remote control
that came packed with
your TV. Replacements or
spares can be ordered as
needed.
MENU
CLEAR
1
4
7
2
5
8
0
3
s
r
r
TM
6
9
IMPORTANT: Copy complete account number
INPUT
SKIP
from your MasterCard
CRK17TA1
VCR1
ON OFF
TV
Copy Number
above your
name on
My card
expires:
DVD VCR2 AUX SAT CABLE
MUTE
SKIP
C
MasterCard
SOUND
GUIDE
GO BAK
INFO
Optional Remote
Control
OK
MEU
CLEAR
IMPORTANT: Copy complete account number
1
4
7
2
5
8
3
6
9
from your Discover Card
WHO INPUT
ANTENNA
This is a universal remote
control you can use to
operate other features
within your TV.
0
REVERSE
P
L
A
Y
F
O
R
W
A
R
D
R
E
C
•
V
C
R
+
S
T
O
P
PAUSE
My card expires:
CRK76TW1
AUTHORIZED SIGNATURE
(Credit card order will not be processed without signature)
To Order
Print or type your name and
address clearly.
A complete and correct
order will save you days
of waiting.
To place your order by phone, have your Visa,
MasterCard or Discover Card ready and call the
toll-free number listed below.
Use this number only to place an order for
accessory items listed on this order form.
Name:
Street:
1-800-338-0376
To place your order by mail, detach and mail the
completed order form with credit card
information, money order or check in US currency
(made payable to Thomson multimedia Inc.) to
the following address:
Apt:
City:
State:
Zip:
Video Accessories
PO Box 8419
Daytime phone number:
Ronks, PA 17573
Please make sure that both sides of this form
have been filled out completely.
• Allow 4 weeks for delivery.
• All accessories are subject to availability.
• Prices are subject to change.
52
Chapter 4
15720240.04 Other
52
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Glossary
Antenna A device used to send or receive electromagnetic waves through the air. In television, an antenna can be
alternative to cable service but does not receive cable channels such as CNN.
Audio Input Used to connect line-level stereo coming from a VCR, laserdisc player and other components. Audio
inputs are also vital parts of audio/video receivers, sound processors, and audio components in general.
Auto Channel Search A TV’s ability to automatically tune or program stations that are used by broadcasters and skip
those left unused.
Black Level The level of black in the picture, sometimes referred to brightness, The black level control is adjusted to
compensate for ambient room light.
Channel Block Allows users to affix security codes to certain channels; typically used by parents to prevent children
from viewing “adult” channels. Channels are blocked and unblocked using the TV’s set’s wireless remote control.
Closed Captioning Dialogue or other text appearing on a TV screen. This feature for the hearing-impaired is now
legally mandated on all TV sets 13 inches or larger.
Coaxial Cable Round antenna wire consisting of a central inner conductor and a cylindrical outer conductor. Used for
most video connections, especially by cable companies. Carries both picture and sound for all available channels.
Contrast The range in brightness between the darkest and brightest areas in a picture.
FCC Federal Communications Commission
G-Link Cable Connects from your TV to your VCR and/or cable box in order for all of the features of the program
guide to work properly.
Guide Plus+ System Pressing the Guide button will bring up an on-screen interactive list of programs and information
that is built into your TV.
On-Screen Display Method of showing TV control status (Channel, Time, Parental Controls, etc.) within the picture
area.
Parental Controls Allows you to program the TV so that children cannot see certain programs, channels or use the
front panel controls.
Video Input Used to connect the incoming picture portion from an audio/video source. Provides higher picture quality
than RF connection because video and audio are separated.
Chapter 4
53
15720240.04 Other
53
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
News 26
Picture Quality 42
Schedule 26
Screen 42
Setup 28
Sort 25
Connections
TV + VCR 8
GUIDE Plus+ system
menus 15
menu 28
Sharpness 42
Signal Type
Cable TV 44
TV + VCR + Satellite
Receiver 11
TV Only 9
Content Themes 31
Contrast 42
Index
Time 44
UHF/VHF Antenna 44
SKIP button 20
Sleep Timer 30, 44
Sort menu 25
MENU button 20
Menus
GUIDE Plus+ system
setup 15
Messages menu 27
MUTE button 20
Control Panels 40
A
F
Accessories 51
Advanced connections 11
Finding the sensor 13
Age-Based Ratings 31
Front panel
T
ANTENNA jack 8, 9, 11
block 37
Time Menu 44
Tint 42
Troubleshooting 46
Arrow buttons 20
buttons 12
N
AUDIO jack 8, 11
jacks 12
Auto
News menu 26
Normal List 44
Number buttons 20
Channel Search 15, 44
Tuning 44
G
U
G-LINK
connecting 13
wands 13
GO BACK button 20
B
UHF/VHF Antenna 44
Unlock, Parental Controls 38
O
Basic
OK button 20
connections 8
V
Grid Guide menu 23
Picture Controls 42
GUIDE button 20
Batteries for the remote 14
GUIDE Plus+ system 22
Black Level 42
P
V-Chip
Channel Lineup 22
Block
Age-Based Ratings 31
Blocking Movies 35
Content Themes 31
VCR
Parental Controls
Locking, Unlocking 38
menu 30
Downloading
Age-Based Ratings 33
Information 22
Channel 37
Front Panel 37
Movie Ratings 36
Specific Content Themes 34
setup 15
Picture
connecting 8
Presets 42
VIDEO jack 8, 11
VOL+ button 20
VOL- button 20
I
Quality Menu 42
POWER button 20
V-Chip Unrated Program 37
Buttons, remote control 20
INFO button 20
INPUT button 20
Interactive setup 15
R
W
C
Rating Limits
Warranty 49
Cables
L
movies 35
TV 32
Remote, batteries 14
Remote control buttons 20
Remote sensor 13
coaxial 7
G-LINK 7
Labels 44
CC (Closed Captioning) 42
Language 42
CH+ button 20
Languages
CH- button 20
Selecting 15
Channel
Locating remote sensor 13
Lock, Parental Controls 38
Block 37
Banner 30
S
Labels 44
Lineup 22
Menu 44
Search 15
Satellite Receiver
connecting 11
Schedule 44
menu 26
Screen Menu 42
Set Time 44
Setup
M
Memory 44
Channels menu 28
Menu
CLEAR button 20
Channel 44
Closed Caption
Channels 28
Display 42
Grid Guide 23
Mode 42
Language 42
Coaxial cable 7
Messages 27
Color Warmth 42
54
Chapter 4
15720240.04 Other
54
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
55
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
56
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
57
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
58
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
59
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
60
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
(This page intentionally left blank)
15720240.04 Other
61
4/9/02, 1:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
Please do not send any products to the Indianapolis address listed in this
manual or on the carton. This will only add delays in service for your product.
Thomson multimedia Inc.
10330 North Meridian Street
Indianapolis, IN 46290
©2001 Thomson multimedia Inc.
Trademark(s)® Registered
Marca(s) Registrada(s)
Printed in Thailand
TOCOM 1572024A
THOMSON
15720240.02 Features
39
4/10/02, 4:38 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|