Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
Thank you for purchasing NS -BT007.
Before using the unit, please read this manual carefully, to obtain the best possible
performance from your speaker.
Introduction
Feature
2
2
Speaker Feature
Bluetooth AV Dongle Feature
Please keep this manual for future reference.
Specification
3
This bluetooth speaker is uniquely designed to bring you great music, even if you are in
a swimming pool. You can enjoy listening to music with your bluetooth mobile phone,
MP 3, MP 4 or other bluetooth supported device.
Speaker Section
Bluetooth AV Dongle Section
Unpacking
3
4
5
Appearance and Controls
Power Resource
Remark:
Bluetooth devices to be connected with this unit are required to support A 2 DP.
Speaker
Bluetooth AV Dongle
Indicator
Operation
6
7
Using By Connecting with Bluetooth AV Dongle
Using By Connecting with Bluetooth Mobile phone
To finish music
Auto Connect
Precautions
Feature
10
About bluetooth speaker system
About bluetooth communication
Notes when using with mobile phone
Others
Speaker Feature
*Supports bluetooth technology
*Supports A 2DP /AVRCP
*Auto bluetooth connection
*Auto power off
*Waterproof and floats in water
*Powered by 4 X AA batteries
What is Bluetooth Technology?
Troubleshooting
No sound
12
13
Low sound level
Distorted sound
Cannot Pair
Delayed sound
Bluetooth AV Dongle Feature
*Supports bluetooth transmission
*Built-in lithium battery
*USB power
2
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Appearance and Controls
Speaker Section
-Bluetooth Version 1.2
-Class 2 (up to 3.3 feet)
-Support A 2 DP & AVRCP
-Maximum output power: 2 W X 2
-Compatible bluetooth profiles:
A 2 DP /AVRCP
1
3
4
-Power: 4 X AA batteries
- Usage Time: Up to 4 Hours
(The temperature or conditions of use has an effect on usage time)
- Dimension (L/W/H):
Approx. 15 2 x 15.2 x 1 3 9.6 4 mm
(5.985 x 5. 9 8 5 x 5. 5 in.)
2
Bluetooth AV Dongle Section
- Bluetooth Version 1. 2
- Class 2 (up to 10 meters)
- Supports A 2 DP & AVRCP
- Power: Built-in battery or USB cable
- Usage Time: Up to 4 Hours
- Dimension (L/W/H)
5
6
7
10
8
9
Approx. 152.13 x 152 .13 x 31.2 mm
(5.99 x 5.9 9 x 1. 23 in.)
Unpacking
1
2
3
4
Bluetooth Speaker
Bluetooth Dongle
Main Button
5 Play/Pause
Play: Tap play button
Pause: Tap pause button (To resume music, tap play button again)
NS -BT007 package includes the following components:
6 Previous Song/Volume Decrease
Previous song: Press and hold previous button for 1 second
Volume decrease: Tap Volume decrease button
7 Next Song/Volume Increase
Next song: Press and hold next song button for 1 second
Volume increase: Tap Volume increase button
USB Cable
Mini Adaptor
User Manual
Product Registration Card
Warranty Card (1)
Batteries (4)
(1)
Speaker
8 Vent Hole
(
1)
It is to stable the speaker sound quality.
(
1)
9 Speaker Power/Pairing Button
Power on/off: Press and hold the power button for 3 seconds
Pairing: In off mode, press and hold power button for 8 seconds
10 Battery Compartment and Battery Door:
The battery door should be screwed tight.
(1)
Bluetooth Speaker System
Bluetooth AV Dongle
Insert four AA batteries
.
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Appearance and Controls
Power Sources
When LED flashes red, it indicates that the battery is low. Low battery may cause the
product’s quality to lessen, please replace new battery at that time. If you wish to
continue to use the speaker at low battery level, the speakers will automatic turn off
after period of time to protect the product.
Power/Pairing Button
Power on/off:
Press and hold the power button for 3 seconds
Pairing:
In off mode, press and hold power button for 8 seconds.
Bluetooth AV Dongle
Mini USB Port
1. To charge the Dongle, plug the mini USB cable to USB interface. 2.
To charge your AV dongle by the provide USB adaptor:
a. Plug the mini USB into the USB adaptor, and
b. Plug the USB adaptor into the wall plug.
Recharging the internal battery or power the dongle
3.5mm Phone Jack
Connect any music device by 3.5mm plug
14
14 Indicator LED
Bluetooth AV Dongle
Bluetooth AV Dongle
USB
Adaptor
Power Sources
Speaker
USB
Port
USB Cable
USB Cable
1. Unscrew/Open the battery door
2. Install 4 AA batteries into the battery compartment, and screw tide the battery door.
Indicator
Status
Indicator (Blue)
Flash
Indicator (Red)
Power on/Standby
Play
AA X 4
Flash
Speaker
Power off
Flash
Flash
Flash
Pairing Mode
Low Battery
Power on/Standby/play
Pairing Mode
Low Battery
Charging
Flash
Flash
Flash
Flash
Flash
Dongle
On Steady
Open
Close
Full Charging
On Steady
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Operation
Using By Connecting with Bluetooth AV Dongle
1. Press & Hold the Speaker Pairing Button
Flashes Red & Blue
Using By Connecting with Bluetooth Mobile phone
1. Press & Hold the Speaker Pairing Button for 8 seconds until the LED flashes red & blue.
for 8 Seconds until LED alternately
Red & Blue
LED flash
2. Press & Hold the Dongle (Base) Pairing button
alternately Flashes Red & Blue
for 8 seconds until LED
2. Turn on bluetooth mode of Mobile phone and enter "Search Bluetooth device" mode.
3. After steps 1 & 2 are completed - wait 3 - 5 seconds - LEDs on Speaker & Base
will Flash Blue to Confirm Pairing
3. Mobile phone will find a device name "NS-BT007." Select this device. Input passcode "0000."
Bluetooth Device:
NS BT 0 0 7
NS-BT007 Passcode:
-
00 00
Selection
Cancel
OK
Cancel
4. Plug the 3.5mm Phone Jack on the Base into the Headphone Jack on your Audio
Device, then Press PLAY
Remark: For other bluetooth source devices, passcode may be called”8888,” ”pass,” etc.
4. Mobile phone will ask "Authorize Auto Connect." Select YES.
Authorize Connect:
Remark:
Initial Set Up should only required for first time use. If you change devices - then you will
need to repeat steps 1 – 3
YES
NO
Dongle & Speaker will exist the pairing mode after 1 minute if the pairing fails. To return the pairing
mode, turn off the device and restart step 1 - 2).Passcode of this speaker is fixed to “0000”.It can not
be paired with a bluetooth source device whose passcode is not “0000”.
5. After pairing is successful, the Speaker LED will flash blue.
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Precautions
6. Start your music player from your mobile phone.
7. If your phone supports AVRCP, the main speaker button is able to control Play/Pause/Next
Previous Song.
8. If your phone supports A2DP, the speaker will produce a stereo sound effect.
9. You can adjust the speaker volume with the Bluetooth Mobile Phone supporting
AVRCP.
About The Bluetooth Speaker System
1. Do not open the speaker. Refer repair service to qualified personnel only.
2. If you need to open the battery compartment while the speaker is wet, please use a dry
towel to dry the speaker to keep water out of the battery compartment.
Remark:
Speaker will remain in pairing mode for 1 minute. If the pairing fails, please turn off the device and
restart steps 1 - 5. For detailed information of your mobile phone A2DP & AVCRP function, please refer
to your mobile phone user guide.
If you accidently wet the battery compartment, please use a dry towel to dry out the
battery compartment and let sit at room temperature for few hours before installing a
new battery.
Turn counter-clockwise to open the battery door
To finish music
1. To turn off speaker, press and hold the speaker pairing button for 3 seconds
.
2. To turn off Bluetooth AV Dongle, press and hold the Dongle pairing button
for 3 seconds
.
3. Leave your mobile phone in Bluetooth mode.
Turn clockwise to close the battery door
Auto Connection
3. Since this speaker is waterproof, make sure the battery door is closed very tight to
prevent water from entering.
NS-BT007 is able to save the data that the device has been registered with. It can be saved
with up to 8 different devices. Therefore, if the device has been registered with an Afloat
Speaker before, it will be able reconnect automatically. However if the device fails to
reconnect automatically, please follow the pairing instructions above.
4. Please do not put anything into the hole.
About Bluetooth Communication
About Vent Hole
Bluetooth technology operates within a range of about 33 feet. In fact, it may
be less if there are obstacles (people, metal, walls, etc) or an electromagnetic
environment.
The vent hole exists to stabilize speaker sound quality. Please do not put anything into
the hole. If water should go into the hole, do not worry -- it will
not affect the speaker quality. However, it would be best to leave the speaker
upside down for awhile to let the water drain out when you are not using the speaker.
The following conditions may affect the sensitivity of Bluetooth communication:
*There is an obstacle, such as a person, metal or wall between NS-BT007 and
the Bluetooth device.
*A device using 2.4GHz frequency, such as a wireless LAN device, cordless
telephone, or microwave oven, is in use near NS-BT007 may cause distortion and
result in communication speed deterioration, noise, or invalid connections.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10
What is Bluetooth Technology?
Precautions
In such a case, perform the following:
Bluetooth wireless technology is a short-range communications technology intended to
replace the cables that connect portable and/or fixed devices while maintaining a high
level of security. The key features of Bluetooth technology are robustness, low power, and
low cost. The Bluetooth specification defines a uniform structure for a wide range of
devices to connect and communicate with each other.
1. Use the NS-BT007 at least 33 feet away from the wireless LAN device.
2. If the NS-BT007 is used within 33 feet of a wireless LAN device, turn off the wireless
LAN device.
3. Install the NS-BT007 and Bluetooth device as near to each other as possible.
Bluetooth technology operates within a range of about 33 feet.
Connecting two devices as necessary is common, but some devices can be connected to
multiple devices at the same time.
*NS-BT007 supports security capabilities that comply with the Bluetooth standard
to provide a secure connection when Bluetooth technology is used, but security
may not be enough depending on the setting. Be careful when communicating using
Bluetooth technology.
Communication System and Compatible Bluetooth Profiles of NS-BT007
Notes when using with mobile phone
Profile is standardization of the function for each bluetooth device specification.
This speaker supports the following bluetooth version and profiles: Communication
System: Bluetooth specification version 1.2
*
You cannot use NS-BT007 to talk over the telephone, even if the Bluetooth
connection between NS-BT007 and the mobile phone is active.
Compatible bluetooth Profiles:
A2DP: Advanced Audio Distribution Profile
AVRCP: Audio/Visual Remote Control Profile
*
For details on operating your mobile phone when receiving a telephone call while
transmitting the sound using the Bluetooth connection, refer to the operating
instructions supplied with the mobile phone.
*
This unit supports security capabilities that comply with bluetooth standards to
Troubleshooting Guide
This chapter presents some troubleshooting problems you may encounter while using
the device. Even if the following guide fails to solve your problem, please do not
disassemble the device, but leave the problems to be solved by professional staff.
provide a secure connection when bluetooth technology is used, but security may
not work, depending on the setting. Please be careful when using bluetooth
function. We do not take any responsibility for the leakage of information during
bluetooth communication.
No sound
*
Ensure that the speaker is not too far from Bluetooth device and is not receiving
Others
interference from a wireless LAN, another 2.4 GHz wireless device, or microwave oven.
*
*
Check that both this speaker and the source device are turned on.
Turn up the volume of the speaker on your bluetooth mobile phone.
(Your bluetooth mobile phone needs to support A2DP/AVRCP)
Replace all the batteries.
If you have any questions or problems concerning this speaker that are not covered in
this manual, please consult your nearest Nextar dealer.
*
*
*
*
*
Should any problems persist, consult your nearest Nextar dealer.
Charge the bluetooth AV Dongle.
Make sure all the connections have been correctly made.
Pair speaker and bluetooth source device again.
Remove any obstacle between speaker and other bluetooth source device or move
away from any obstacles.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Troubleshooting Guide
TM a trademark of Nextar (Hong Kong) Limited
Nextar
Low sound level
*
*
*
Turn up the volume of bluetooth source device or speaker.
Replace all the batteries.
Charge the bluetooth AV Dongle.
Nextar may find it necessary to modify, amend or otherwise change or update this
manual.
We may reserve the right to do this at any time, without any prior notice.
All specifications and features are subject to change without notice.
Distorted sound
*
Turn down the volume of bluetooth source device or speaker.
© NEXTAR, INC AND ITS AFFILIATES
1661 FAIRPLEX DRIVE,
LA VERNE, CA 91750 USA
*
*
Replace all the batteries.
Charge the bluetooth AV Dongle.
Sound skips or the correspondence distance is short
If device that generates electromagnetic radiation, such as a wireless LAN, other
All products distributed by Nextar, Inc, unless otherwise indicated.
Made in China.
*
bluetooth device, or microwave oven is nearby, move away from such sources.
*
Remove any obstacle between speaker and other bluetooth device, or move away
from the obstacle.
*
*
*
Locate speaker and other bluetooth device as close as possible to each other.
Re-position speaker.
Re-position other bluetooth device.
Cannot Pair
*
*
Bring speaker and bluetooth device closer together.
Restart your speaker.
Sound is delayed
*
If you watch TV or DVD through bluetooth AV Dongle, the sound may lag behind
the picture.
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
|