Q See Security Camera QSTD501616C User Guide

Quick Start Guide  
16 Channel DVR  
Model: QSTD501616C  
DVR Setup  
Connect  
Setup  
Enjoy  
1
2
3
What’s in the box? check that your package includes the following:  
DVR  
.
USB Mouse  
Manual  
RCA-BNC x2  
500 GB Hard Drive  
Ethernet Cable  
Remote Control  
QPSCDCA Power Supply x4  
60 ft. Camera Cables  
with Audio x4  
Power Supply  
& 8 Way Adapter  
for QD28414  
Cameras x4 - QD28414  
x4 - QD28414W  
60 ft. Camera Cables x12  
Digital Peripheral Solutions, Inc.  
8015 East Crystal Drive,  
Anaheim, CA 92807  
Cameras x4 - QSC48030  
Cameras x4 - QPSCDCA  
QSC48030 Power Supply x4  
Q-See is a registered trademark of Digital Peripheral Solutions, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
3
CONNECTING TO A TV OR VGA MONITOR  
CONNECTING CAMERAS: QPSCDCA  
A
B
C
D
Connect the video and power connectors from the cable to the camera  
Connect the other video connector on the other end to the Video In port on the DVR  
Connect the power connector on the other end of the cable to the power adapter  
Attach the power adapter to a power source  
Connect to a TV:  
A
B
Plug the BNC to RCA adapter to the Video Out port on the DVR and then connect a RCA  
cable (not included) to the adapter  
Connect the other end of the RCA cable to the Video Input on the TV  
NOTE: To record sound from the camera attach the audio connector to the camera  
Attach the audio connector on the other end of the cable to an Audio In port on the DVR  
Repeat the same process for cameras 2 through 4  
E
Connect to a VGA monitor:  
Plug in the VGA cable (not included) to the VGA port on the DVR  
Connect the other end of the VGA cable to the Monitor  
A
B
3
4
A
A
B
E
A
C
D
B
B
Use only the power adapters supplied with the Q-See unit.  
We recommend Plugging the DVR and Cameras into a Transient  
Voltage Surge Protector (UL-449 Rating)* 330 or lower clamping  
voltage, Joule rating 400.  
CAUTION:  
Page 3  
Page 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B
Setting up the DVR to Record: This system offers four modes for recording:  
1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor.  
Setup  
2
For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual.  
To navigate through the DVR menu, three options are available:  
1. DVR Front Panel: Use the DIRECTION keys to move the cursor and the  
ENTER key to select  
2. Remote Control  
B1  
B2  
3. USB Mouse (included)  
A
Accessing the DVR menus  
A1  
Press the MENU key on the DVR front  
panel, which will display the LOGIN  
SCREEN (A1). Enter the default user  
name: admin, and password: 123456.This  
will display the SYSTEM SCREEN (A2).  
Use the direction keys to move the cursor  
and the ENTER key to select.  
Manual Recording:  
Setup and enable the cameras you want to record by going to the System Menu  
and selecting the RECORD option (B1, Red Box) this will display the Record Screen  
(B2). Put check marks in the cameras you want to record, and set the quality and  
frame rate you prefer for each camera. Push the RECORD button on DVR to start  
recording. Push the stop button to stop recording.  
B3  
B4  
A2  
The system screen offers the following  
setup features:  
BASIC option: set time, date, enable  
audio and password check.  
LIVE option: adjust the camera images  
RECORD option: (B2) to set up  
resolution, frame rate, video quality and  
enable cameras for recording.  
PTZ option: setup Pan-Tilt-Zoom cameras  
USER option: setup users on the system  
NETWORK option: setup remote access  
TOOLS option: to access hard drive  
information, update firmware, and restore  
system defaults.  
Time Schedule Recording:  
Go to the System Menu and select the SCHEDULE option (B3, Red Box). The  
SCHEDULE screen (B4) will appear. Put a check mark in the Schedule box (B4, Red  
Box). Select or de-select the Days and Hours you want the cameras to record. The  
Green area shows the hours that are enabled to record, and the transparent area  
shows the hours which are not enabled to record. Select OK to save the settings.  
Repeat this feature for all cameras.  
Motion Detection Recording:  
You must first setup the days and times for recording on motion detection, by going  
to the System Menu and selecting the SCHEDULE option (B3, Red Box). The Green  
area shows the hours that are enabled to record, and the transparent area shows  
the hours which are not enabled to record. Select the hours you wish to record. Put a  
check mark in the Motion Box (B4, Green Box).  
Refer to Chapter 3 of the user’s manual  
for more information on the SYSTEM  
menu.  
Page 5  
Page 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C
Setting up the DVR to Playback Files  
C1  
C2  
B5  
Display the SYSTEM screen (B5) and  
select the MOTION option (GREEN box).  
Press the SEARCH key on the DVR, enter User Id and Password if the system is  
password protected. The SEARCH option will display (C1). Select Time Search  
(C1 RED box) and press the ENTER key.  
B6  
C4  
C3  
Push ENTER to put a check mark in the  
enable option (BLUE box), and select  
the SET button (RED box) in the Trigger  
options to display (B7).  
The Time Calendar (C2) will display (the highlighted dates are the files available  
to play). Select the dates you wish to view, and push ENTER. The Time Search  
menu (C3) will appear.  
Select the cameras you wish to record  
when motion is detected on CH 1 (CH  
1=Camera 1). You also have the option to  
record on any PTZ cameras on the system  
if motion is detected on this channel. In  
(B7), we’ve selected cameras 1, 2, and 3  
to record if motion is detected on CH 1,  
including the PTZ camera which we have  
set on CH 3. Select OK to save the settings  
and select the Area Set option (B6 GREEN  
box) to display (B8).  
B7  
Select the channels (cameras) to search, and the display mode you wish to  
view. Then select the files on the timeline. Hit play which will display the file  
player (C5).  
TO SEARCH BY EVENT: Follow (C1) to select Event search (C1 GREEN box),  
(C4) will display. Click the Date icon to select the date, and the available files  
to playback will display in the box on the bottom of the screen. Select a file and  
push ENTER. The File Player (C5) will open and play the selected recording.  
Use the Direction keys and ENTER key to  
select the areas of the camera screen to  
detect motion. Blue areas will detect motion  
and Red areas will not trigger recording.  
Select ALL in the upper right corner to make  
the entire screen motion sensitive. Next  
choose the sensitivity level. (Sensitivity Level  
1 = least sensitive and Sensitivity Level 8 =  
most sensitive.) Select the Save option to  
save the settings. Repeat steps B6 through  
B8 for channels 2-16.  
C5  
B8  
NOTE: Recording will not be interrupted while you are in Playback mode.  
Page 7  
Page 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
D
Setting up the DVR to Backup Files  
Enjoy  
3
D1  
NOTE: If you stop recording while backing  
up the files, the backup will go faster.  
Insert a USB flash drive into the USB port  
located on the front of the DVR. Press  
the BACKUP button and enter the User Id  
and Password if the system is password  
protected. This will display the BACKUP  
screen shown in (D1). Select the Date icon  
and push ENTER. Select the date of files to  
backup. The days with files will be high-  
lighted. Select the START TIME and END  
TIME and push the BACKUP button. This  
will display the BACKUP INFO screen (D2).  
This screen will show the START and END  
time, the device, the space required, and  
how much space is available. Select OK,  
and the backup will start. A progress bar will  
display (D3). Once the backup is complete,  
a dialog box will display.  
CONGRATULATIONS  
on your purchase!  
This Q-See product has undergone extensive quality control. If you have  
any issues during the setup process, please contact our support department  
before returning the product.  
D2  
We have your solution!  
1) Need assistance setting up the remote monitoring feature with your Q-See  
D3  
troubleshooting tips, FAQs, DVR firmware downloads, Live Chat and More.  
3) Contact our Support Team:  
On the Web: (24/7) Visit the Technical Support Section  
By Phone (Monday thru Friday, 9am-5pm (PST)  
Tech Support 1 (877) 998 3440, ext 539  
Customer Service 1 (877) 998 3440 ext. 538  
By Email:  
@
Page 9  
Page 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Radio Shack Caller ID Box 43 3902 User Guide
Radio Shack Universal Remote Audio Video Remote Control User Guide
RCA Flat Panel Television J32BE220 User Guide
Realistic Scanner PRO 16A User Guide
Roku MP3 Player Wi Fi Music System User Guide
Samsung Digital Camera DV150FBK User Guide
Samsung Projector 20071106142725218 User Guide
Samsung Telephone ITP 5121D User Guide
Sanyo Camcorder VPC MZ3 User Guide
Schumacher Battery Charger 1010 User Guide