QSDT304C2
User’s Manual
Contact US:
Q-see Products
8015E.Crystal Dr
Anaheim, CA 92807
Website:
Customer Service:
Phone: 877-998-3440 x 538
Email:[email protected]
Tech Support:
Phone: 877-998-3440 x 539
Email:[email protected]
Fax:
714-998-3509
Rev 032109
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
1 Introduction
This miniature size product adopts an advanced microwave and wireless transfer
technology developed and manufactured with 2.4GHz wireless digital receiving modules,
which has stable performance and a strong anti-interference function. This product can be
used with wireless cameras to record wireless camera signals.
2 What's included:
The following items should be included in the box. Please check that you have them all before
installation.
A Two receivers
B 1 power adapter for the receivers with 2 way power splitter cable.
C 2 cameras with power adapters
D Two RCA cables
E stands of camera and receiver
F screws for camera mounting
3 Main features.
3.1 Supports up to 4 cameras simultaneously.
3.2 Digital 2.4G wireless modules.
3.3 Supports A/V output from receiver
3.4 Supports AE and AWB
3.5 Supports OSD (On Screen Display) screen-controlled operation
3.6 Supports 4 Channels displayed in order
3.7 Supports automatic channel switch
3.8 Transmission distance up to 100M (Tested in open air)
3.9 M-JPEG format Compression
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Buttons On Receiver
4.1
Mode switching
Pairing
Switch between quad mode and single channel mode
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
Pairing the cameras and receiver
OSD menu display
Menu
Auto Scan
Right/CH2
Up/CH1
Switching the channels automatically with set time interval
Move to the Right / Switch to Channel 2
Move Up / Switch to Channel 1
Switching the channel manually
Move Down / Switch to Channel 3
Move to the Left / Switch to Channel 4
SMA antenna plug in
Manual Scan
Down/Ch3:
Left/CH4
4.10 SMA antenna
4.11 Power LED
Red Light when power on
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Side panel
5.1
5.2
A/v output
Power input (DC 9V)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Camera Installation
6.1
Camera stand mounting screw (for ceiling mount)
Power in cable (DC 5V input)
Pairing button
6.2
6.3
6.4
6.5
6.6
SMA antenna plug
Camera stand mounting screw (for desk top mount)
Microphone
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Menu
Enter the Menu option to setup the main feature of this product.
Through Right/Left button can adjust parameters, and through Up/Down button can
select the features to set.
7.1
Resolution (High / Low) : When set to low, the image is not as clear, but it
displays more frames per second. When set to high, the image will be clearer, but
it displays fewer frames per second.
7.2
SCAN TIME： This option sets the time interval between cameras when
switching channels automatically. OFF，Scan is inactive. When on options are: 5
seconds to 20 seconds between cameras.
7.3
7.4
7.5
AUDIO VOL: Adjust the volume of the audio from 0 to 20. Use the Left/right button
to reduce/increase the volume.
BRIGHTNESS: Adjust the brightness of images, range of brightness is from 0 to 5,
use the Left/right button to adjust it.
PAIR: Use this option to pair the cameras with specific channels, press the Pair
button, use the Right/Left button to choose the channel; one channel can only pair
with one camera. After selecting the specific channel and pressing the pair button
again the window below will appear:
Press the Pair the button on corresponding camera and wait for a while, the
monitor connected to the receiver will display the images from the cameras
that have been matched. Pairing succeeded.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7.6
7.7
TV OUT: This option allows you to select the video format (NTSC/PAL) for video
output resources. In the United States we use NTSC format.
Channel selection buttons
You may select channels by using the corresponding buttons on the receiver to
manually choose channel.
Channel 1：Up
Channel 2：Right
Channel 3：Down
Channel 4：Left；
Circulation Button：Monitor screen circulates the image from Channel 1 to
Channel4 then back to Channel1. The receiver will skip the channels that do not
have cameras assigned to them.
8 Troubleshooting
Symptom
Remedy
The power does not
turn on.
Check that the AC power cord is connected securely.
(In case of power failure) Check the breaker.
Check if Monitor is on and video format (NTSC / PAL)
is correct.
No image display on
monitor
Check monitor’s video cable and connections.
Confirm that the camera has power.
Check if the audio cable is well connected to monitor.
There is no sound.
If there is a microwave oven close by, turn the microwave oven
off.
Interruption in
You may have other units that run on the 2.4GHz signal. Move
their base away from both the transmitter and/or the receiver
Your home may have a metal frame that reduces the range of the
unit.
Image and Sound
Move the Cameras and/or the receiver around to see it reception
improves.
Poor Reception
Quality
Try resetting Pairing between camera and receiver
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Technical specifications
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Notes
10.1
10.2
10.3
This product can be damaged by pressure or impact.
Any repair of this product should only be done by Professionals.
This product should only be opened by Professionals.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
10.4
10.5
This product can not be used in high temperature environments.
Replacement Parts – When replacement parts are required, be sure the service
technician has used replacement parts specified by the manufacturer or have the
same characteristics as the original part. Unauthorized substitutions may result in
fire, electric shock or other hazards.
10.6
Digital Peripheral Solutions does not accept responsibility for any illegal use of this
product by the customer.
Q-SEE PRODUCT WARRANTY
Thank you for choosing our products.
All of our product users have a conditional free warranty repair service for
hardware within 12 months starting from the purchase date, and a free
exchange service within one month (valid for manufacturing defects).
Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction, abnormalities in operation or damage caused by
the following reasons are not within the free service scope of our company.
Please select payable service.
(1) Equipment damage caused by improper operation
(2) Improper environment and conditions in/on which the equipment operates,
e.g., improper power, environment temperature, humidity and lightening strike
etc. that cause equipment damage.
(3) Damage caused by acts of nature: earthquake and fire etc.
(4) Equipment damage caused by the maintenance of personnel not
authorized by our company.
(5) Product sold over 12 months ago.
In order for us to provide various services to you please complete the
registration procedure after you purchase the product. Cut off or copy User’s
Information Card and fax or mail it to us after the card is filled in. You can also
the Register link.
Customer Information Card
User’s Name
Company
Name
Mr./Mrs.
Postal
Address
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Postal code
Phone
Number
E-mail
Model
Number of
Product
Serial Number
of Product
Purchase
Date
Distributor
If you have questions:
Contact Us:
Mailing Address:
DPS Inc.
8015 E. Crystal Dr
Anaheim, CA 92807
Customer Service:
Phone: 877-998-3440 x 538
Email: [email protected]
Website:
Tech Support:
Fax:
Phone: 877-998-3440 x 539
Email: [email protected]
714-998-3509
The material in this document is the intellectual property of our company.
No part of this manual may be reproduced, copied, translated, transmitted, or published in any form
or by any means without our company’s prior written permission.
1. Our products are under continual improvement and we reserve the right to make changes without
notice, therefore no guarantee is given as to the correctness of its contents.
2. We do not accept any responsibility for any harm caused by using our product.
3. The product picture may differ from the actual product, which is only for your reference. The
accessories may be different in different selling areas. For details of accessories, please refer to your
local distributor.
Copyright reserved
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|