QSC13212D
Hi-Resolution CCD Color Camera
With 2.8 to 12MM Varifocal Lens
And Built-in On Screen Display
Product Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
1. Avoid strong impact and stay away from strong electromagnetic interference and
vibration.
2. There are some sophisticated parts inside the camera, therefore, during
transportation and installation, please avoid damage caused by stress or severe
vibration. For the sake of safety, please do not switch on power before completing all
installation.
3. Please comply with all electrical safety standards during operation, camera or
signal transmission cable should maintain a sufficient distance (50 meters, 165 feet)
from high-voltage equipment or cables, precautions should also be taken to avoid
lightening.
4. Please install the camera in well-ventilated environment.
5. Please do not position the camera facing direct sunlight or other strong light source;
this could damage the lens and sensor.
6. The temperature range for the cameras are -20 ~ 50 °C (-4 to 122°F)
7. To avoid lightning strikes, please make sure the power supply ground line is in
good condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
Directory
1. Features··································································································1
2. Dimensions and Accessories ······························································ 2
3. Installation
················································································· 3
4. Circuit Board Layout ········································································10
5. OSD (On Screen Display) Operation ···············································11
5.1 Exposure ····················································································12
5.2 Color ························································································· 13
5.3 Day & Night Switch ···································································14
5.4 Function ·····················································································15
5.5 Motion Detection ······································································16
5.6 Privacy Zone ············································································ 16
5.7 Camera ID ·············································································· 17
5.8 Camera Settings ······································································· 17
5.9 Exit ·····························································································18
6. Technical Specifications ···································································19
7. FAQs ··································································································21
Contact Information ··········································································22
Product Warranty ···············································································23
Customer Information Card ······························································25
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Features
1. New Generation SONY CCD
Adopting the latest Second-generation high-sensitive CCD, it can receive clear and
lucid images even with very low illumination.
2. Hi-resolution Video Resolution
Color horizontal resolution can reach 550TVL, B/W horizontal resolution can reach
600TVL.
3. Day & Night Switch
Day & Night cameras can switch automatically into color or B/W according to
available light.
4. Digital Wide Dynamic Technology
Built-in special digital wide dynamic technology enables camera to see all views
inside and outside house even in strong or weak light.
5. DNR (Digital Noise Reduction) Technology
Enhanced ability to handle signal noise ratio, this technology enables the camera to
receive clearer and more vivid images even under low-light conditions.
6. Gamma Curve
Variable gamma adjustment, there are four different curve options.
7. Multi-Zone Backlight Compensation Setting
Backlight compensation can automatically adjust the light to achieve overall
optimization of the image, even in high contrast environment such as between dark
and strong light.
8. Multi-Zone Privacy Setting (PRIVACY)
Privacy can be divided into different zones.
9. OSD (On Screen Display)
Built-in OSD, the user can easily set the camera parameters through menu.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Dimensions and Accessories
Dome Camera
Dome Camera
2.2 Accessories
Item
Accessories
Quantity
1 PC
Remark
1
2
3
Product Manual
Customer Info Card
Fixed Screws
Standard
1 PC
Standard
1 Set
Dome Camera
2
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Installation
1.
Release screws to open the cover
2. Use the pictured tool to take off the screws
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Open the cover
4. Arrows point to the 3 holes for ceiling mount screws
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Mounting the base to ceiling
6. Screws for changing the angle of the lens
5
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Loosen the screws on both sides with a screwdriver
8. Twist the top to change the left/right angle of the lens
6
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Top screw adjusts focus, bottom screw adjusts lens size.
10. Cover of cable pull out hole
7
Download from Www.Somanuals.com. All Manuals Search And Download.
11. You can remove the cover with a coin
12. Pull cable through the hole
8
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Place cable in channel and through side hole
14. Cable through the hole
9
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Connector for portable video tester if needed by the installer, the black
button is for operating OSD (On Screen Display).
4. Circuit Board Layout
QSC13212D Dome Camera Circuit Board
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4.2 On Screen Display Switch
ENTER
Press to Enter or Exit the menu
UP/DOWN
Tilt toward UP and DOWN to move up and down in menu
Tilt toward LEFT, RIGHT for modifying the menu parameters,
press RIGHT to move to the next menu and modify the parameter.
LEFT/RIGHT
5. OSD (On Screen Display) Operation
Press the "OK" to enter main menu, if the button is not pressed for 90 seconds,
the main menu will disappear automatically from the screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Exposure
When the cursor stops on "exposure", press “Ok” button to enter "exposure" to set the
parameters.
Lens
There are two kinds of options, automatic or manual; depending on the specific type
of the lens.
Lens Brightness
User can adjust image brightness from 0 to 100, depending on the lightness of
surroundings. The default value is 35.
Electronic Shutter
Electronic shutter is to set the camera shutter speed, that is, the video output per
second (1 / 50, means the camera can output 25 pictures per second). User can set
both slow and high-speed shutter. ( The speed can be set as auto, from 1 / 50 ~ 1 /
100000. The user can set the specific speed according to the specific surroundings.
The default value is auto. )
AGC (Auto Gain Control)
This function not only increases the brightness of camera images, but also increases
the image noise, users can adjust it from 12DB-33DB or shut it down according to
actual situation.
Exit
When the setup is complete, click "Up", "Down" to move the cursor to "return", then
press "OK", "Exit" dialog will appear, select" Exit "(Exit menu, do not save the
settings of parameters) or "factory original settings" (it means to reset to factory
settings ) or "Save & Exit" (save the changes of parameters and then exit the menu)
and then press "OK" to perform the corresponding return functions.
Please refer to the above description to operate "exit".
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Color
Move the cursor to "RGB" icon, click "OK" to enter the White Balance menu to set
relevant parameters.
White Balance
This is used to restore the authenticity of the color, affected by the change of color
temperature. Users can choose white balance mode according to the actual situation:
Auto White Balance / Auto-tracking White Balance / Lock White Balance / Manual
White Balance respectively.
Manual - Red
Manual white balance can be adjusted, the default value is 100.
Manual - Blue
Manual white balance can be adjusted, the default value is 100.
Red Gain
Adjust the red value.
Blue Gain
Adjust the blue value.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5.3 Day & Night Switch
Day & Night Switch is specially designed for different occasions. There are four
kinds of modes as follows: automatic mode, color mode, B/W mode, and external
switch. The user can set different modes according to the surroundings.
Color Signal
Set menu to display color or not
Color to B/W Settings
When the mode is "external control", user can’t adjust it. This is color to B/W
accumulated light intensity, when it reaches “alternating light” state, camera could be
damaged by frequent switching. It might cause it to not correctly judge the image and
reduction of life span of the camera.
B/W to Color Settings
When the mode is "external control", user can’t adjust it. This is B/W to color
accumulated light intensity, when it reaches “alternating light” state, camera could be
damaged by frequent switching. It might cause it to not correctly judge the image and
reduction of life span of the camera.
Delay Time
This means when the light begins to alternate between states, the system can make it
delay a while ensuring the light is fully within this switching range.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
CDS Control
The filter switch will be controlled by the photocell, and it can work only in external
control mode.
5.4 Function
Mirror
Left or Right Mirror can be set when turning on the mirror switch.
Sharpness adjustment
Adjust the image sharpness from 0-50.
Peripheral Brightness Compensation
If you need to compensate brightness, set switch to ON and move the cursor down to
"Peripheral Brightness Compensation" and adjust the value from"0-50".
Strong Light Reversion
If you need to adjust for strong light, set switch to ON and move the cursor down to
"Strong Light Reversion" and adjust the value from"0-50".
Gamma
Adjust the gamma value, there are several different mode options, different modes
will give different ways of handling the bright and dark area of the image. The user
should select appropriate mode to achieve the most optimized image for different
situations. Value range is from 0.05-1.0, the default value is: 0.45.
Backlight Compensation
If there is backlighting in the external environment, you can use this function. First,
set switch to "ON", move the cursor down to "Backlight Compensation" and adjust
the value from"0-50".
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Wide Dynamic Compensation
This is digital wide dynamic function, you can adjust its value in order to achieve the
best results, the values are: 60DB, 80DB, 100DB.
5.5 Motion Detection (This camera does not have this feature)
Mainly used for setting the image motion detection and alarm linkage function.
5.6 Privacy Zone
"Privacy Zone" is mainly used for special places or special surroundings, for this
camera there are four zones set for privacy. The color of "Privacy Zone" can also be
set as one kind of "red, blue, and black". First, in the area to choose whether to open
"Privacy Zone", selecting "off" indicates that this zone does not participate in privacy,
selecting "On" indicates that this zone participates in the privacy.
Move the cursor to "Setting Zone", press "OK" to enter "Privacy Zone setting". Press
"Left, Up" to set privacy position, after setting is finished, press "OK", then "Right,
Down" to set the privacy position, after setting is finished, press "OK" to select the
color. And click "Left, Right" to exit setting.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5.7 Camera ID (This camera does not use this feature)
Used for setting the camera's address, communication protocol and baud rate.
5.8 Camera Settings
Title Display
The title can be set ON or OFF.
Title Edit
Move the cursor to "Title Edit", Click "OK" to enter the title setting. Up to16 letters,
numbers & symbols can be used as "Title".
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Move the cursor to the input column, press "OK"-the cursor will be moved to the
above input character column, after selecting characters, press "OK", the cursor will
be moved to the next input position. If you need additional settings, please refer to the
above operation. After finished inputting, move cursor to "RETURN" click "OK" to
return to the previous menu.
Title Reset
Restore the title setting, which is used to clear the previous title.
Title Position
Enter the title position to move the title up and down, after confirming the position
click "OK" to exit the setting.
Title Background
Set the title background.
Auto-completion-point
Set the black point and white point as auto-completion-point numbers.
Language
Press "left, right" to select language. Chinese & English are currently available.
5.9 Exit
When all settings are complete, press "Up", "Down" to move the cursor to "Return",
then press "OK", "Exit" dialog will appear, select" Exit "(Exit menu, do not save the
settings of parameters) or "factory original settings" (it means to return to factory
settings ) or "Save & Exit" (save the changes to parameters and then exit the menu)
and then press "OK" to perform the corresponding return functions.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Technical Specifications
Function
QSC13212D Dome Camera
Imaging Sensor
1 / 3" SUPER HAD ‖ hi-sensitivity CCD & DSP
Sensor Area
Lens Size
4.9mm x 3.7mm
2.8mm to 12mm Manual Varifocal
PAL: 752(H)×582(V); NTSC: 768(H)×494
(V)
Pixels
Signal System
Syn. System
Shutter speed
S/N Ratio
Video Output
Horizontal resolution
PAL or NTSC
Power Synchronization / Internal Synchronization
PAL:1/50~1/100000s; NTSC:1/60~1/100000s
More than 58dB(AGC OFF)
1.0Vp-p, 75 ohms, negative sync
Color 550TVL, B/W 600TVL
Color:0.1Lux (F1.2, 50IRE, AGC ON),
B/W:0.001Lux (F1.2, 50IRE, AGC ON)
25M(80ft)
Mini. Illumination
General
Functions
IR Distance
IR Leds
30pcs ф5mm
850nm
Wave length
D/N Switch
Auto/Color/B/W/External Control
Color to B/W & B/W to Color for option
3s~12s Optional
Brightness Switch
D/N Switching Time
Title setting
16 characters
Title Position
Image Brightness
AGC
Any position on the Screen
0~100 adjustable
0dB~33dB adjustable
English/Chinese OSD
OSD Control
Peripheral
Brightness
Compensation
(BLC)
On/Off,0~50 adjustable
Special
functions
Strong Light
Reversion
On/off, 0~50 adjustable
Backlight
0~30 adjustable
Compensation
Privacy Zone
Privacy Zone Color
1~4 Zones for setting privacy areas
Black/Grey/Color. 1-6 Colors optional
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Wide dynamic
compensation
AWB
60dB, 80dB, 100dB optional
Manual / Auto / Auto Tracking
On/Off
Mirror
Sharpness adjustment
Gamma Correction
CCD white Point
Auto-detection
Auto-completion
point
0~50 adjustable
0.3~1.0 adjustable
Not supported
white and black points automatically added
Menu Background
Power Supply
Power Consumption
Operation
On/Off
DC12V 300mA/AC24V(optional)
2.5W; 7W(IR)
-200C~+500C (-4 to 122°F)
Power &
Other
Parameters
Temperature
Operation Humidity
Storage Temperature
Storage Humidity
Weight (kg)
20~80%
-400C~+600C (-40°F to 140°F)
20~95%
1.20 (42.33 oz)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
7. FAQs
1. Q: No image after installation?
A: a. Check the power supply connections, try plugging into different surge protector
and a different power outlet. and whether the indicating led is always on or not;
b. Check the video cable, make sure it is ok.
c. Make sure the monitor is on.
2. Q: Image interference after installation?
A: a. Check the output from the power supply, try plugging into different surge
protector and a different power outlet.
b. Check if electromagnetic interference exists in the area, please use some
anti-interference devices. Try using insulated video cable.
3. Q: Camera image can’t switch into B/W at night?
A: Open the camera menu to see if "Day/Night Switch" is set as AUTO, if not, please
change it to AUTO.
4. Q: Noise is very obvious at night with low illumination.
A: Make sure AGC is ON.
5. Q: The image color is abnormal?
A: a. Make sure the white balance is correctly set as Auto White Balance.
b. Enter the menu to restore factory settings.
6. Q: Image appears to be whiter than usual after installation?
A: Check whether the lens aperture was adjusted too large, so that the image
appears whiter.
b. Check if the brightness of the monitor is set too high.
7. Q: On installation, image is not clear or has dark corners?
A: a. Adjust focus and zoom of the lens. Make sure the focus is set properly
b. Make sure the lens is clean.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Please contact us using the following methods with questions
about your Q-See product.
Q-See Products
8015 E. Crystal Dr.
Anaheim, CA 92807
Email:
Customer Service
Technical Support
Online Live Web Chat Visit:
Telephone:
Customer Service
1.877.998.3440 x 538
Technical Support
1.877.998.3440 x 539
Fax:
1.714.998.3509
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Q-See Product Warranty
Thank you for choosing our products.
All of our products users have a conditional free warranty repair service for hardware within
12 months starting from purchase date, and a free exchange service within one month
(valid for manufacturing defects). Permanent upgrading service is provided for the software.
Liability Exclusions:
Any product malfunction, abnormalities in operation or damage caused by following
reasons are not within the free service scope of our company. Please select payable
service.
(1) Equipment damage caused by improper operation
(2) Improper environment and conditions in/on which the equipment operates, e.g.,
improper power, environment temperature, humidity and lightening strike etc. that cause
equipment damage.
(3) Damage caused by acts of nature: earthquake and fire etc.
(4) Equipment damage caused by the maintenance of personnel not authorized by our
company.
(5) Product sold over 12 months ago.
In order to provide various services to you, please complete registration procedure after
you purchase the product. Cut off or copy User’s Information Card and fax or mail it to us
website and clicking on the Register link.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The material in this document is the intellectual property of our company.
No part of this manual may be reproduced, copied, translated, transmitted, or
published in any form or by any means without our company’s prior written
permission.
1. Our products are under continual improvement and we reserve the right to make
changes without notice. But no guarantee is given as to the correctness of its
contents.
2. We do not accept any responsibility for any harm caused by using our product.
3. The product picture may differ from the actual product, which is only for your
reference. The accessories will probably be different according to the different
selling areas. For details of accessories, please refer to your local distributor.
Copyright reserved
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Information Card
User’s Name
Mr./Mrs.
Company Name
Postal Address
Postal code
Phone Number
E-mail
Model Number
of Product
Serial Number of
Product
Purchase Date
Distributor
25
Download from Www.Somanuals.com. All Manuals Search And Download.
|