Instruction Manual
www.pyleaduio.com
Model: PLTVATSC1
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Table of Contents
1 Introduction
Safety and Product Information .....................................................1
Table of Contents............................................................................2
Precautions....................................................................................3
Layout Of The Main Unit ..................................................................4
Layout Of The Remote Control .........................................................5
2 Installation
Connections...................................................................................6
Remote Control Battery Installation..................................................7
Accessories Included......................................................................7
3 Basic Operation
Initial Setup ...................................................................................8
Initial Channel Scan ....................................................................8-9
Changing Channels........................................................................9
Audio and Language Control .....................................................10-11
Information Display........................................................................11
Information Display & Icon..............................................................11
Guide Display...............................................................................12
Closed Caption.............................................................................12
4 Menu Operation
Channel Menu Features............................................................13-14
Caption Menu Features.............................................................15-18
Setup Menu Features................................................................19-23
V-Chip Menu Features ..............................................................24-32
5 Reference
Troubleshooting Guide ..................................................................33
Specifications ..............................................................................34
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Precautions
Please read this user guide completely and carefully prior to attempt to install your new car
video equipment. Install correctly, your new equipment will provide you with years of enjoyable
and safe usage.
Installing this unit requires technical expertise. This unit should be installed by a qualified
technician or service personnel. If you try to install this unit by yourself, do it properly, referring
to the installation and wiring diagrams in this operating manual. Improper installation may
result in fire or electric shock.
1.Do not operate this equipment while driving-safe driving should always be your highest priority.
2.Do not install components in areas which are susceptible to rain, moisture direct sunlight,
extremely heat or cold, excessive dust, dirt or humidity.
3. Immediately unplug the power cord and send the monitor to your local dealer or service
center as soon as possible:
If there is smoke or any peculiar odor present during used
a)
b) If there is damage to any of the internal components
4. To avoid damage to the unit and risk of electronic shock, do not permit any of this equipment
to become damp or wet from water or liquid. If this does occur, immediately unplug the power
cord and send the unit to your local dealer or service center as soon as possible.
5. Do not attempt to repair, open or disassemble any of the components. Dangerous high
voltages are present which may result in electric shock.
6. Use only a power source with DC12~24 volts car battery (negative ground).
7. Do not place or suspend objects on the power cord, as this may damage the cord.
8. Do not twist or place the power cord near any source of heat in the vehicle.
9. Do not attempt to repair a damaged, broken or faulty power cord. Replace it with a new one
immediately.
10. Avoid dropping any metal objects or inflammable items into the unit ventilation slots.
11. After the unit is installed, do not arbitrarily pull it down or strike it. This may loose the
mounting screws and cause it fall down.
12. Do not install your monitor where:
a) it will obstruct the driver’s view.
b) it will obstruct the operation of the air-bag system.
c) it will obstruct the operation of the vehicle, especially the steering wheel, shift lever, or
brake pedal.
d) a diver or passengers may injure themselves when getting into or out of the car.
13. Do not damage any pipes, tubes, the fuel tank or electric wiring when installing this unit.
this can cause a fire. if you drill a hole in car panels, make sure that any hidden car parts will
not be damaged.
14. do not use any nuts or bolts for safety devices such as steering linkage, fuel supply or
braking systems. this can cause a fire or an accident .take care to prevent cords and wires
from getting tangled or crimped in the moving portion of a seat rail.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Layout Of The Main Unit
Front
Right
Right
Left
Left
Power
LED
Ext. Remote
Video Input
Audio Input
Audio Output
Video Output
Antenna Input
c
a
c
a
b
4
b
5
1
2 3
Rear
DC 12~24V
Power Input
6
1. Antenna Input (F connector)
2. Power LED
3. Ext. Remote Sensor (3.5mm Plug)
4. AV Output
a) Right Audio Output (Red RCA)
b) Left Audio Output (White RCA)
c) Video Output (Yellow RCA)
5. AV Input
a) Right Audio Output (Red RCA)
b) Left Audio Output (White RCA)
c) Video Output (Yellow RCA)
6. Power Input DC12~24 Volts
Negative Earth
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Introduction
Layout of The Remote Control
12
1
SOURCE
2
13
14
15
16
20
3
4
17
18
5
8
21
22
23
7
V
O
L
-
V
O
L
+
11
6
ARM32DTV
19
9
10
1.SOURCE: To select the input source.
2.POWER: Press to turn on/off the DTV
3.NUMERIC KEY: The number keys include:1.2.3.4.5.6.7.8.9.0.
4.-/--:For 10 and over numbers, press -/--, then the number.
5.FREEZE:Freezes the current image. Press again to return to live video.
6.MENU: Press to display the main menu.
7.CH+ / :Press to move the cursor or switch to the previous channel.
8.VOL- / : Press to move the cursor or decrease the volume when playing program.
9.CH- / : Move the cursor or switch to the previous channel.
10.VOL+ / : Move the cursor or increase the volume.
11.ENTER: Press to confirm the option in the menu or to display the channel list.
12.AUDIO: To change audio language.
13.MUTE: Press to turning off the sound temporarily, press again to restore the previous volume level.
14.GUIDE: To displays current and future program information. .
15. INFO: Displays current channel/program information.
16.CC: Select between Closed Caption modes.
17.PREV: Re-call last channel viewed.
18.SCALE:Select normal, fill screen or overscan mode
19.EXIT: Press to return to previous menu screen.
20.RED KEY: Refer to the corresponding operation. Can be programmed to specific user functions
21.GREEN KEY: Refer to the corresponding operation. Can be programmed to specific user functions.
22.BLUE KEY: Refer to the corresponding operation. Can be programmed to specific user functions
23.YELLOW KEY: Refer to the corresponding operation. Can be programmed to specific user functions.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation
Connections
7 cm
7 cm
7 cm
7 cm
Antenna
Antenna
Diagram 1 install to front windshield
Diagram 2 install to front or rear bumper
Install of DTV Antenna
Red
3A Fuse
DTV RECEIVER
Black
DC 12~24 Volts
Antenna Input
Video Output
Audio Output
Video Input
Audio Input
BATTERY
Red Light = Stand By
Green Light = Power On
Ext.
Remote
Right
Right
Left
Left
Power LED
Fuse replacement
Never use fuse with an amperage rating
exceeding the one supplied with the unit as
this could damage the unit.
When replacing the fuse, be sure to use one
that matches the amperage described on the
original fuse. If the fuse blows, check the
power connection and replace the fuse. If the
fuse blows again after replacement, there
may be an internal malfunction. In such a
case, consult your nearest your’s dealer.
Remote Sensor
Video Output
Audio Output Left
Audio Output Right
Fuse holder
Fuse
3A
MONITOR
Video
Player
Antenna wire
if the antenna wire is too long,
do not tie it and squeeze together
as diagram
Try to loose and run around
as diagram , if can be have
better receiving.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Installation
Replacing the Remote Control Battery
While pushing the
lock lever (1), pull
out the battery
holder (2)
1)Always use new battery when replace the old set.
2)Do not attempt to charge, short-circuit, disassemble,
heat or burn used batteries, battery may be explode
if mistreated.
+ side facing up
3)Battery replacement is necessary when remote
control acts sporadically or stops operating.
4)Do not drop, apply shock or step on the remote control.
5)Do not spill water on the remote control.
2
1
6)Do not place objects between the remote control and remote sensor.
7)Do not use remote control for the other equipments at the same time.
8)Do not leave the remote near any heat sources, or in a place subject to direct sunlight
(especially on the dashboard).
Push to close
9) Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately
consult a doctor.
10)If the REMOTE does not operate even when you operate the remote control from a close range,
it is time to replace the battery (use CR-2025 lithium battery), refer ring to the label on the back of
the basic control. Use any of other may be a risk of fire or explosion.
11)Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.
12)Wipe the battery with dry cloth to assure a good contact.
13)Under normal conditions, batteries will last approximately 1 year. The service life may be shorter,
depending on the conditions of use.
Accessories Included
SOURCE
V
O
L
-
V
O
L
+
Remote control
x 1
DTV Antenna
x 1 (5m)
Remote Sensor
x 1 (4.5m)
Power Supply
Wire x 1 (0.5m)
Audio / Video Cable
x 1 (1.2m)
Screw x 4
Ø3 x 15 mm
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Basic Operation
Initial Setup
After the install connections have been made, and the unit has been powered up, a blue
screen should be seen on the monitor screen. Pressing the MENU button on the remote
control should display the main menu on the screen, as shown in Figure 1 below. In this User
Guide describes the procedures for basic TV operations such as scanning for channels,
changing channels, language control, and information display.
Figure 1. Main Menu
Basic Operation
This chapter will describe the steps required for basic operation of the DTV box, including
performing the initial channel scan, changing channels, language control, and information
display. Please refer to Page 5 for a description of the DTV box remote control button functions.
Initial Channel Scan
1. To perform a channel scan when the input is from a terrestrial antenna, click the MENU button
on the DTV remote control, and using the navigation buttons, highlight the Channel menu
button and select it by pressing the ENTER button. Select the Auto Program sub-menu, then
select Yes in the Warning text window, as shown in Figure 2 below.
Figure 2. Auto Program Sub-Menu
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Basic Operation
2. After clicking Yes, the DTV box will scan the RF input for all DTV channels, and add
these channels to the list of available channels. The Auto Program Status window,
as shown in Figure 3 below, shows the progress of the channel scan as well as the
total number of digital channels found, including major and minor channels. The
auto program process can be cancelled at any time by pressing the EXIT button on
the remote control.
Figure 3. Auto Program Status Window
3. After the channel scan is completed, the menu window will disappear, and the DTV
box will display the first locked channel.
Changing Channels
One advantage of digital television is the ability for a broadcaster to transmit more than one
program simultaneously on one channel. This is done by using major and minor channel
numbers such as 4-1 (major channel) and 4-2, 4-3 and 4-4 (minor or sub-channels.) With
digital television, a broadcaster on channel 4 (the major number) may provide their usual
programming on channel 4-1 but also provide other programs on channel 4-2, 4-3, 4-4, etc.
Note that some broadcasters only broadcast their usual programming on one channel such
as 4-1.
After scanning, switching between channels can be easily done like changing channels
on a regular television, but there are several ways to do it:
Use the Channel + (CH+) and Channel - (CH-) buttons on the remote control.
Use the number and dash (-) remote buttons to enter in the desired channel number.
Enter in the major number, then the “-“ button, then the minor number.
(e.g. Enter “1”, “3”, “-“, “2” to tune to channel 13-2.)
If the major channel is desired, it is only necessary to enter in the major channel number
(e.g. Entering “1”, “3” will tune to channel 13-1.)
NOTE: After entering channel numbers in you can press ENTER to go to the channel
immediately, or wait a few seconds to go there automatically.
Use the PREV button to switch to the last channel viewed.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Basic Operation
Audio and Language Control
This section discusses the methods to control the audio levels and language.
Volume Control
Audio volume can be increased or decreased by pressing the Volume Up (VOL+) or Volume
Down(VOL-) buttons on the DTV remote control.
Mute
Pressing the MUTE button on the DTV remote control will silence the programs’ audio
MUTE button again to restore audio.
Audio Language
Digital channels sometimes provide multiple audio tracks, often in a different language.
If these alternate audio tracks are available, you can cycle through them by repeatedly
pressing the AUDIO button on the DTV remote control. If the language or audio track
description is available, it will be displayed briefly on screen.
Menu Language
The menu language can be changed by following these steps.
1. Press the MENU button on the DTV remote control.
2. Use the navigation buttons to highlight and select the Setup sub-menu.
3. In this sub-menu, select the Language option.
4. In this window, as shown in Figure 4 next page, it is possible to select three menu language
options: English, Spanish and French.
Figure 4. Menu Language Window
5. Use the navigation buttons to highlight and select the desired language.
6. Press the MENU or EXIT buttons on the DTV remote control to exit out of this menu.
The Menu text will now be displayed in the selected language.
Information Display
The following text windows are used to display information with the DTV Box:
-Channel Number – displayed briefly when changing channels.
-Volume Level – displayed when changing volume.
-Mute – displayed briefly when audio is silenced by pressing MUTE button.
-Audio Information – displayed briefly when AUDIO button is pressed.
-Menu Windows – main menu and sub-menus are used to access setup and other features.
-Information Display – displays channel/program information when INFO button is pressed.
-Closed Caption – displays Closed Caption text when enabled.
-Guide Display – displays program information when GUIDE button is pressed.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Basic Operation
Information Display
When the INFO button on the DTV remote control is pressed, a text window will appear on the
screen, as shown in Figure 5 below.
Figure 5. Information Display Window
This window displays information about the current channel and program being viewed. The
information includes the date, time, channel number and channel name. Information icons also
provide additional details about the channel and program.
Information Icons
CC
CC (Closed Caption)
Indicates that closed captioning is available for the program being
broadcast.
1080i, 720p,
480p, 480i, etc.
Resolution
Indicates the native resolution of the program being broadcast.
1080i/p and 720p are High Definition, 480p and 480i are Standard
Definition.
16:9 or 4:3
Multi
Aspect Ratio
Indicates the native aspect ratio of the program being broadcast.
Multiple Language Tracks
Indicates that multiple language tracks are available for this program.
Current Language Track
English, etc.
Indicates the language of the currently selected audio track for this program.
Possible languages: English, Spanish, French, Unknown
Program Rating
TV_G, etc.
Indicates the TV program or movie rating for the program being broadcast.
Refer to page 24 (V-Chip Menu Features) for a description of all ratings.
Guide Display
When the GUIDE button on the DTV remote control is pressed a text window will appear on the
screen, as shown in Figure 6 below
Figure 6. Guide Display Window
This window displays information about the current and future program being watched, if that
information is provided by the broadcaster. The information in this window includes the channel
number and name, the current time, and the program name, start time, and end time for the
current program and the next program. By repeatedly press down navigation buttons, the
information for additional future program can be displayed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Basic Operation
Closed Caption
Closed Caption (CC) provides an on-screen text version of the audio content for the program
being broadcast. Not all programs support CC; if CC is supported for a given program, the “CC”
icon will appear in the Information Display that can be viewed while watching the program by
pressing the INFO button on the DTV remote control.
When the CC button on the DTV remote control is pressed a text window will appear on the
screen, as shown in Figure 7 below.
Figure 7. Closed Caption Display Window
There are three possible CC modes that can be cycled through by repeatedly pressing the CC
button. The modes are:
-On
If CC text is provided for the broadcast being watched, it will always be
displayed in a text window at the bottom or top of the screen.
-OFF
CC text is never displayed.
-On Mute If CC text is provided for the broadcast being watched, it will be displayed in a
text window at the bottom or top of the screen only when the MUTE audio option
has been selected by pressing the MUTE button on the DTV remote control.
This chapter describes all of the Menu features and controls provided with the DTV Box.
These menu features are accessed by pressing the MENU button on the DTV remote control,
and the navigation buttons (
)are used to navigate within the sub-menus. The ENTER
button is used to select a desired sub-menu and to select provided options. It is also used to
close certain windows. The left ( ) navigation button or EXIT button can be pressed to return
to the previous sub menu. Pressing the MENU button will exit completely out of the menu
system. The four sub-menus available are:
Channel – Provides options for auto and manual programming of viewable channels.
Caption – Provides options for selecting CC modes and service type.
Setup – Provides options for setting up menu and display features
V-Chip – Provides options for locking programs from being viewed based on selected ratings.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Channel Menu Features
After pressing the MENU button on the DTV remote control, use the
navigation buttons to
highlight the Channel button and press the ENTER button. The Channel sub-menu has two options:
Auto Program and Manual Program, as shown in Figure 8 below.
Figure 8. Channel Sub-menu
Auto Program
The Auto Program option is used to automatically scan for available digital channels, and
should be used when powering on the DTV for the first time. Refer to Page 8 for details on how
to perform the Auto Program procedure. If initiated again at a later time, this process will erase
all of the previously saved channels.
Manual Program
The Manual Program option is used to manually scan for available digital channels and to add
additional channels to the list of available channels; it will not affect the previously saved
channels. To use this feature it is helpful to know the broadcast frequency of the channel to be
added, which is different from the channel number. For instance, your “local channel 4 news”
may be on broadcast frequency 35. This is only important to know when adding a channel that
was not detected by the Auto Program function. If you do not know the broadcast frequency
number, see the web site antennaweb.org (for addresses in the USA.)
After accessing the Channel sub-menu, use the
navigation buttons to highlight the Manual
Program option, and press the ENTER button to select it, then select Yes in the Warning text
window. The Manual Program window will appear, as shown in Figure 9 below.
Figure 9. Manual Program Window
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Signal Quality
There are several items to indicate the signal quality including signal strength, AGC, SNR,
lock status and threshold errors.
After accessing the Channel sub-menu, use the
navigation buttons to highlight the Signal
Quality option, and press the ENTER button to select it. The Signal Quality window will appear,
as shown in Figure 10 below. A dot will appear to the left of the current signal quality selection.
Figure 10. Signal Quality Window
Use the
navigation buttons to highlight the desired setting and press the ENTER button to
select it. When the signal quality is in on option, the signal quality will be displayed as the OSD
main menu is not active. The window is shown as the Figure 11 below.
Figure 11. Signal Quality Window
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Caption Menu Features
After pressing the MENU button on the DTV remote control, use the
navigation buttons to
highlight the Caption button and press the ENTER button. The Caption sub-menu has seven
options: Mode, Analog CC, Digital CC, Font Size, Font color, Font Style and background color,
as shown in Figure 12 below.
Figure 12. Caption Sub-menu
Mode
The Mode option provides another method of selecting the desired Closed Caption mode of
operation, and has the same three options that can selected by repeated pressing the CC button
on the DTV remote control: Off, On and On Mute.
After accessing the Caption sub-menu, use the
navigation buttons to highlight the Mode
option, and press the ENTER button to select it. The Mode window will appear, as shown in
Figure13 below. A dot will appear to the left of the current CC mode selection.
Figure 13. Mode Window
Use the
navigation buttons to highlight the desired CC mode, and press the ENTER
button to select it. The three CC modes are:
• On
If CC text is provided for the broadcast being watched, it will always be
displayed in a text window at the bottom or top of the screen.
• OFF
CC text is never displayed.
•On Mute If CC text is provided for the broadcast being watched, it will be displayed in a
text window at the bottom or top of the screen only when the MUTE audio
option has been selected by pressing the MUTE button on the DTV remote
control.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Analog CC
The analog CC sub-menu provides the option of selecting which CC service should be used for
the analog CC text display window. The default setting, CC1, is the correct service for almost all
cases.
After accessing the Caption sub-menu, use the
navigation buttons to highlight the CC
option, and press the ENTER button to select it. The analog CC window will appear, as shown
in Figure 14 below. A dot will appear to the left of the current CC service selection.
Figure 14. Analog CC Window
Use the
navigation buttons to highlight the desired CC service, and press the ENTER
button to select it. The four service options are:
• CC1 - the primary caption service that synchronizes the captioning language with
the sound, used by most broadcasters. Captioning is displayed in the same language
as the program’s dialog.
• CC2 and CC4 - the special non-synchronous caption services that do not need to be in
sync with the sound and may provide simplified captioning, which is usually delayed.
These are rarely available and are used only in special conditions, such as when CC1
and CC3 are not available.
• CC3 - an alternate captioning service channel. Captioning is often a secondary language
translation such as French, Spanish, simplified English or displayed at a slower rate.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Digital CC
The Digital CC sub-menu provides the options for which service is going to be used in current
digital CC display. The digital CC sub-menu will show as below figure 15.
Figure 15. Digital CC Window
Use the
navigation buttons to highlight the desired CC service, and press the ENTER
button to select it.
Service #1 is designated as the Primary Caption Service. This service contains the verbatim, or
near-verbatim captions for the primary language being spoken in the accompanying program
audio.
Service #2 is designated as the Secondary Language Service. This service contains captions in
a secondary language which are translations of the captions in the Primary Caption Service.
The other service sub-channels are not pre-assigned. It is up to the discretion of the individual
caption provider to utilize the remaining service channels.
The following font size, font color, font style and background are dedicated for digital CC Setting.
Font Size
The font size includes small, standard and large 3 options for customer selection. The font size
sub-menu window is displayed as following figure 16.
Figure 16. Font Size Window
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Font Color
Font color includes white, black, red, green, blue, yellow, magenta and cyan eight colors. The
font color sub-menu is displayed as following figure 17.
Font Style
There are totally 7 styles for font style setting. The display window is the following figure 18.
Figure 17. Font Color Window
Figure 18. Font Style window
Background color
CC background color includes white, black, red, green, blue, yellow, magenta and cyan eight
colors. Figure 19 is the options select window.
Figure 19. Background Color Window
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Setup Menu Features
After pressing the MENU button on the DTV remote control, use the
navigation buttons to
highlight the Setup button and press the ENTER button. The Setup sub-menu has seven
options: Adjust, Language, Time Zone, Sleep, Transparency, Theme and Info, as shown in
Figure 20 below.
Figure 20. Setup Sub-menu
Adjust
The Adjust sub-menu provides the option of adjusting the brightness, contrast, saturation
and hue picture parameters.
After accessing the Setup sub-menu, use the
navigation buttons to highlight the Adjust
option, and press the ENTER button to select it. The Adjust window will appear, as shown in
Figure 21 below.
Figure 21. Adjust Window
Use the
navigation buttons to highlight the parameter to be adjusted, and use the
navigation buttons to adjust the parameter level until the desired setting is reached. Press
the MENU or EXIT buttons on the DTV remote control to exit out of this window.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Language
The Language sub-menu provides the option of selecting the desired menu language. There
are three menu language options: English, Spanish and French.
After accessing the Setup sub-menu, use the
navigation buttons to highlight the Language
option, and press the ENTER button to select it. The Language window will appear, as shown in
Figure 22 below. A dot will appear to the left of the current language selection.
Figure 22. Language Window
Use the
navigation buttons to highlight the desired language and press the ENTER button
to select it.
Time Zone
The Time Zone sub-menu provides the option of selecting the desired Time Zone for North
America. This is used to automatically program the correct local time. There are seven time
zone options: Hawaii (HA), Alaska (AK), Pacific (P), Mountain (M), Central (C), Eastern (E) and
Atlantic (A), as shown in Figure 23 below.
Figure 23. Time Zones for North America
20
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
After accessing the Setup sub-menu, use the
navigation buttons to highlight the Time
Zone option, and press the ENTER button to select it. The Time Zone window will appear, as
shown in Figure 24 below. A dot will appear to the left of the current time zone selection.
Figure 24. Time Zone Window
Use the
navigation buttons to highlight the desired time zone and press the ENTER button
to select it.
Sleep
The Sleep sub-menu provides the option of selecting a set amount of time before the DTV will
automatically switch to stand-by mode. There are seven sleep time options: Off and 15, 30, 45,
60, 90 and 120 minutes. A warning popup window will appear on the screen 1 minute before
the set time expires to let the user know that the DTV will soon enter stand-by mode. The user
can then turn off this feature or set a new sleep time amount by accessing this Sleep menu
before the time expires.
After accessing the Setup sub-menu, use the
navigation buttons to highlight the Sleep
option, and press the ENTER button to select it. The Sleep window will appear, as shown in
Figure 25 below. A dot will appear to the left of the current sleep time selection.
Figure 25. Sleep Window
Use the
navigation buttons to highlight the desired time and press the ENTER button to
select it.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Transparency
The Transparency sub-menu provides the option of selecting the menu window transparency
based on the viewer preference. There are two menu transparency options: On and Off. When
On is selected, the dimmed background video will be seen behind the menu windows. When
Off is selected, the menu windows will be solid and the background video will not be seen
behind the menu windows.
After accessing the Setup sub-menu, use the
navigation buttons to highlight the
Transparency option, and press the ENTER button to select it. The Transparency window will
appear, as shown in Figure 26 below. A dot will appear to the left of the current transparency
selection.
Figure 26. Transparency Window
Use the
navigation buttons to highlight the desired transparency setting and press the
ENTER button to select it. The menu windows will now show the characteristics of the
selected transparency option.
Theme
The Theme sub-menu provides the option of selecting the menu theme based on the viewer
preference. Each theme includes settings for the menu button colors. There are two menu
theme options.
After accessing the Setup sub-menu, use the
navigation buttons to highlight the Theme
option, and press the ENTER button to select it. The Theme window will appear, and a dot will
appear to the left of the current theme selection. Both currently available themes are shown in
Figure 27 below.
Figure 27. Theme Window for Both Themes
Use the
navigation buttons to highlight the desired theme and press the ENTER button to
select it. The menu windows will now show the characteristics of the selected theme.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Info
The Info sub-menu provides information about the DTV software version. After accessing the
Setup sub-menu, use the
navigation buttons to highlight the Info option, and press the
ENTER button to select it. The Info window will appear, as shown in Figure 28 below.
Figure 28. Info Window
Press the ENTER button or the navigation button to close this window.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
V-Chip Menu Features
The DTV box incorporates V-Chip technology to block viewing of television programs and
movies according to their rating categories. V-Chip is included into TVs and other video
devices to work in conjunction with the TV Parental Guidelines. It electronically reads
television programming ratings and allows parents to block programs they believe are
unsuitable for your children. Non-rated movies can also be blocked. The rating categories
in use include TV ratings for TV programs and MPAA ratings for theatrical movies being
broadcast. The Canadian English and Canadian French rating categories are also
available for programs broadcast in Canada.
After pressing the MENU button on the DTV remote control, use the
navigation buttons
to highlight the V-Chip button and press the ENTER button. A password or PIN is needed to
access and make changes in this menu. Using the number buttons on the DTV remote
control, enter the 4-digit password in to the Password window as shown in Figure 29
below. An “ ” for each digit entered.
NOTE: The factory default PIN is “0000” and can be changed using the Change PIN
sub-menu. If the new PIN is forgotten, it can be reset to “0000” by unplugging
power to the DTV module.
Figure 29. Password Window
The V-Chip sub-menu has seven options: Lock, TV Parental Guide, MPAA Rating, Canadian
English, Canadian French, Downloadable RRT and Change PIN, as shown in Figure 30 below.
Figure 30. V-Chip Sub-menu
24
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Lock
The Lock sub-menu provides the option of selecting the V-Chip lock status based on viewer
preference. There are two menu lock options: On and Off. When On is selected, programs will
be blocked based on the settings selected in the TV Parental Guide, MPAA Rating, Canadian
English, and Canadian French sub-menus. When Off is selected, no programs will be blocked.
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the Lock
option, and press the ENTER button to select it. The Lock window will appear, as shown in
Figure 31 below. A dot will appear to the left of the current lock selection.
Figure 31. Lock Window
Use the navigation buttons to highlight the desired lock setting and press the ENTER button to
select it.
TV Parental Guide
The TV Parental Guide sub-menu allows the user to block programs based on TV ratings,
including age-based ratings and content sub-ratings for violence, language, sexual situations
and suggestive dialog. It is possible to block all programs with ratings at and above a specified
level, or to block programs with specified content within a selected level.
The following are the descriptions for each rating:
Age Rating
TV-Y
Description
All Children
Designed to be appropriate for all children.
TV-Y7
TV-G
Directed to Older Children
Designed for children age 7 and above.
Possible content rating: FV
General Audience
Most parents would find this program
appropriate for all ages.
TV-PG
TV-14
Parental Guidance Suggested
Contains material that parents may find
unsuitable for younger children.
Possible content ratings: D, L, S, V
Parents Strongly Cautioned
Contains some material that many parents
would find unsuitable for children under 14
years of age.
Possible content ratings: D, L, S, V
TV-MA
Mature Audience Only
Specifically designed to be viewed by adults
and therefore may be unsuitable for children
under age 17.
Possible content ratings: L, S, V
25
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Content Rating
Description
Suggestive Dialogue
Coarse Language
D
L
S
Sexual Situations
Violence
V
FV
Fantasy Violence
NOTE: When a specific age or content rating is selected, all settings above that rating will also
be selected to be blocked.
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the TV
Parental Guide option, and press the ENTER button to select it. The TV Parental Guide window
will appear, as shown in Figure 32 below.
Figure 32. TV Parental Guide Window
Use the
navigation buttons to highlight the desired rating to block and press the
ENTER button to select each one. A dot will appear to the left of each selection that is
blocked.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
For example, if it is desired to block all TV-14 programs:
Select TV-14 using the
navigation buttons, then press the ENTER button. The block
indicator dots will be added to all TV-14 and higher categories.
NOTE: All TV-14 and higher programs will be blocked, along with all programs having the
content labels. When the DTV receives broadcasts of those programs, the DTV will block both
video and audio signals to the output, and the following message will appear on the screen.
VChip block
Rating: TV_14
Please input password:
_ _ _ _
Entering in the V-Chip password will temporarily override the V-Chip block settings for this
program so that it can be viewed.
MPAA Rating
The MPAA Rating sub-menu allows the user to block broadcast movies based on the MPAA
(Motion Picture Association of America) ratings, which are age ratings based on violence,
language and sexual content. It is possible to block all movies with ratings at and above a
specified level. It is also possible to block un-rated movies, such as MPAA Not Rated movies.
The following are the descriptions for each rating:
Age Rating
Description
NR
G
Not Rated by MPAA
General Audience
Suitable for all audiences.
PG
Parental Guidance Suggested
Some material may not be suitable for
children.
PG-13
Parents Strongly Cautioned
Some material may be inappropriate for
children under age 13.
R
NC-17
X
Restricted
Under age 17 requires accompanying parent
or guardian.
No One 17 and Under Admitted
Some material is intended to be viewed by
adults only.
No One 17 and Under Admitted
Some material is explicitly sexual and is
intended to be viewed by adults only
NOTE: When a specific rating is selected, all settings above that rating will also be selected to
be blocked.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the MPAA
Rating option, and press the ENTER button to select it. The MPAA Rating window will appear,
as shown in Figure 33 below.
Figure 33. MPAA Rating Window
Use the
navigation buttons to highlight the desired rating to be blocked and press the
ENTER button. All ratings above this level will also be marked to be blocked.
For example, if it is desired to block all PG-13 movies:
Select PG-13 using the
navigation buttons, then press the ENTER button. The lock
indicator dots will be added to all PG-13 and higher categories.
NOTE: All PG-13 and higher movies will be blocked. When the DTV receives broadcasts
of those movies, the DTV will block both video and audio signals to the output,
and the following message will appear on the screen.
VChip block
Rating: PG_13
Please input password:
_
_
_
_
Entering in the V-Chip password will temporarily override the V-Chip block settings for this
program so that it can be viewed.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Use the
navigation buttons to highlight the desired rating to be blocked and press the
ENTER button. All ratings above this level will also be marked to be blocked.
For example, if it is desired to block all PG programs:
Select PG using the
navigation buttons, then press the ENTER button. The lock indicator
dots will be added to all PG and higher categories.
NOTE: All PG and higher programs will be blocked. When the DTV receives broadcasts of
those programs, the DTV will block both video and audio signals to the output, and the
following message will appear on the screen.
VChip block
Rating: PG
Please input password:
_
_
_
_
Entering in the V-Chip password will temporarily override the V-Chip block settings for this
program so that it can be viewed.
Canadian French
The Canadian French sub-menu allows the user to block TV programs based on the Canadian
French TV ratings system, which are age-based ratings similar to Canada's film classification
systems with categories based on violence, language and sexual content. It is possible to block
all programs with ratings at and above a specified level.
The following are the descriptions for each rating:
Age Rating
G
Description
General Audience
Suitable for all audiences.
8 ans+
13 ans+
16 ans+
18 ans+
Parental Guidance Suggested
Some material may not be suitable for children
under age 8.
Parents Strongly Cautioned
Some material may be inappropriate for
children under age 13.
Parents Strongly Cautioned
Some material may be inappropriate for
children under age 16.
Adult Programming
Some material is intended to be viewed by
adults only.
NOTE: When a specific rating is selected, all settings above that rating will also be
selected to be blocked.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Canadian English
The Canadian English sub-menu allows the user to block TV programs based on the Canadian
English TV ratings system, which are age-based ratings similar to Canada's film classification
systems with categories based on violence, language and sexual content. It is possible to
block all programs with ratings at and above a specified level.
The following are the descriptions for each rating:
Age Rating
C
Description
All Children
Designed to be appropriate for all children.
C8+
G
Directed to Older Children
Designed for children age 8 and above.
General Audience
Suitable for all audiences.
PG
Parental Guidance Suggested
Some material may not be suitable for
children.
14+
18+
Parents Strongly Cautioned
Some material may be inappropriate for
children under age 14.
Adult Programming
Some material is intended to be viewed by
adults only.
NOTE: When a specific rating is selected, all settings above that rating will also be selected
to be blocked.
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the
Canadian English option, and press the ENTER button to select it. The Canadian English rating
window will appear, as shown in Figure 34 below.
Figure 34. Canadian English Rating Window
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the Canadian
French option, and press the ENTER button to select it. The Canadian French rating window
will appear, as shown in Figure 35 below.
Figure 35. Canadian French Rating Window
Use the
navigation buttons to highlight the desired rating to be blocked and press the
ENTER button. All ratings above this level will also be marked to be blocked.
For example, if it is desired to block all 13 ans+ programs:
Select 13 ans+ using the
navigation buttons, then press the ENTER button. The lock
indicator dots will be added to all 13 ans+ and higher categories.
NOTE: All 13 ans+ and higher programs will be blocked. When the DTV receives broadcasts
of those programs, the DTV will block both video and audio signals to the output, and
the following message will appear on the screen.
VChip block
Rating: 13_ans+
Please input password:
_
_
_
_
Entering in the V-Chip password will temporarily override the V-Chip block settings for this
program so that it can be viewed.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Menu Operation
Downloadable RRT
The current V-Chip recognizes the current RRT, which is communicated as part of the Program
and System Information Protocol. It depends on broadcasts which could communicate a new
rating system via the PSIP that both the chip and a TV’s software can understand. With
downloadable RRT, blocking of program shall occur when a program rating is received that
meets the pre-determined user requirement. User could program the open V-Chip with
numbers of filters that go beyond the general descriptors.
Change PIN
The Change PIN sub-menu allows the user to change the PIN (password) used to access the
Vchip menu features.
After accessing the V-Chip sub-menu, use the
navigation buttons to highlight the Change
PIN option, and press the ENTER button to select it. Enter in the current PIN using the DTV
remote control number buttons. The factory default PIN is “0000”. If a new PIN was previously
entered and has been forgotten, it can be reset to “0000” entering the current PIN, the Change
PIN window will then appear, as shown in Figure 36 below.
Figure 36. Change PIN Window
A new 4 digit PIN can then be entered, and then entered again to confirm the new PIN. A popup
window will appear to confirm that the PIN has been successfully changed. Press the ENTER
button to complete the PIN change process.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Reference
Reference
This chapter discusses ways to troubleshoot the DTV box, provides the
specifications.
Troubleshooting Guide
If you are experiencing problems with the DTV box reference,
see Table 1 for available solutions.
Table 1. DTV Box Reference Troubleshooting
Solution
Symptom
Make sure the power cord is securely plugged on the DTV module, the power is
connector to DC +12 Volts (negative earth)
No power
Make sure the DTV module is turned on using the remote control power button.
Make sure to point the remote control directly at the remote control sensor,
with no obstacles in between them.
DTV is not responding to the
remote control
You may be too far from remote control sensor. Try moving closer.
Make sure that the remote control batteries are installed in the correct direction (+
and –).
The batteries may be depleted. Try replacing them with new ones.
Verify DTV remote control is operating correctly, by pressing power buttons.
Make sure that the antenna in cable is correctly connected to the DTV.
Make sure that the video out cable is correctly connected to the DTV module and monitor.
Make sure that the DTV module and monitor are turned on.
No picture
Make sure that the monitor is correctly set to the selected DTV video output channel.
Refer to the monitor owner’s manual for further information.
Check the antenna and the antenna cable. There may be damage or interference
sources.
Check the antenna and the antenna cable. There may be damage or interference
sources.
Picture is blocky or not clear
Reposition the antenna to improve signal strength. Signal strength can also be
provide help in determining the best antenna orientation.
Make sure that the audio cables are correctly connected between the DTV audio
outputs and the monitor audio inputs.
No sound
Make sure that DTV and monitor are turned on.
Make sure the DTV and monitor volume settings are at a reasonable level.
Make sure that the MUTE function is not activated on the DTV or monitor.
Make sure the monitor is correctly set to the selected DTV audio output channel.
When monitor has only one audio input jack, use a standard audio cable (white) to
connect the audio output jack (white) on the DTV to the audio input jack on the monitor.
The red audio cable and the DTV red audio output jack are not needed.
Make sure that the Auto Program process in the Channel menu has been
completed. It will be required when you setup the DTV for the first time or when the
DTV is moved to a location where other channels are broadcast.
The selected channel does not exist at the time. There are not always subchannels
being broadcast.
All digital channels are not
received
When the Auto Program process is interrupted and not completed, some
channels will not be received. Make sure to complete the Auto Program process
in the Channel menu.
Make sure the DTV CC mode is set to Off.
Make sure that the monitor CC display is turned off. Refer to the monitor owner’s manual
for further information on how to turn off its CC feature.
CC display stays on or two
sets of captions are shown
Unplug the DC power cord and wait for approx. 5 seconds, then plug in the power
cord. In the V-Chip menu, enter the default number "0000.”
Forgot the PIN for V-Chip
33
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Reference
Specifications
Product: DTV Box for ATSC to NTSC
Connecting Jacks ANT IN: F connector (75 ohm)
RF Input: DTV standard ATSC
Output:
Video 1-pin RCA jack, 1Vpp, 480i composite
Analog Audio 2-pin RCA jack (Left & Right), 450 mVrms (100k ohm)
Input:
Video 1-pin RCA jack, 1Vpp, 480i composite
Analog Audio 2-pin RCA jack (Left & Right), 10 dBs, (10k ohm)
Channel Coverage: Terrestrial: 2-69
Power Source: DC12~24 Volts +/-0.5 %
Negative Earth
Power Consumption: 6W (Power on),
Less than 300 mW (Power off)
Operating Condition: Approx. 41 F° (5 C°) - 176 F° (80 C°)
Board Dimensions: Approx. 218 x104 x 24 mm
8.58 x 4.09 x 0.95 inch (LxWxD)
Weight: Approx. 15.16 oz. (430 g)
NOTE
Designs and specifications are subject to change without prompt notice.
Weight and dimensions shown are approximate.
WARNING! HAZARD!
Do not operate this unit unless vehicle
is packed in safe and Legal area
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Television System Committee
Pyle, Inc.
1600 63rd street
Brooklyn, NY 11204
Download from Www.Somanuals.com. All Manuals Search And Download.
|