PYLE Audio Stereo System FWM352 User Guide

FWM352  
Mini Hi-Fi System  
User manual  
Manuel d'utilisation  
Manual del usuario  
Benutzerhandücher  
Gebruikershandleidingen  
Manuale per l'utente  
Användarhandböckerna  
Brugermanual  
Käyttöoppaita  
Manual do usuário  
ꢀꢁꢂꢀꢃꢄꢅꢆꢃꢇ ꢂꢄꢈꢉꢊꢋ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
y
CD1/2/3  
REPEAT  
TUNER  
MUTE  
AUX  
2
PROGRAM  
SHUFFLE  
£
0
4
VOL  
TITLE  
!
ALBUM  
)
(
DISPLAY  
DIM  
SLEEP  
TIMER  
ON/OFF  
¡
5
DSC  
DBB  
6
*
1
2
3
8
4
6
9
7
5
^
0
%
$
#
@
!
&
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DK  
SF  
Luokan 1 laserlaite  
Advarsel:Usynlig laserstråling ved åbning  
når sikkerhedsafbrydere er ude af funktion.  
Undgå utsættelse for stråling.  
Varoitus! Laitteen käyttäminen  
muulla kuin tässä käyttöohjeessa mainitulla  
tavalla saattaa altistaa käyttäjän  
turvallisuusluokan 1 ylittävälle  
näkymättömälle lasersäteilylle.  
Oikeus muutoksiin varataan. Laite ei  
saa olla alttiina tippu-ja roiskevedelle.  
Bemærk: Netafbryderen er sekundært  
indkoblet og ofbryder ikke strømmen fra  
nettet. Den indbyggede netdel er derfor  
tilsluttet til lysnettet så længe netstikket  
sidder i stikkontakten.  
Huom.Toiminnanvalitsin on kytketty  
toisiopuolelle, eikä se kytke laitetta irti  
sähköverkosta. Sisäänrakennettu verkko-  
osa on kytkettynä sähköverkkoon aina  
silloin, kun pistoke on pistorasiassa.  
S
Klass 1 laseraparat  
Varning! Om apparaten används på annat  
sätt än i denna bruksanvisning specificerats,  
kan användaren utsättas för osynlig  
laserstrålning, som överskrider gränsen för  
laserklass 1.  
Observera! Stömbrytaren är sekundärt  
kopplad och bryter inte strömmen från  
nätet. Den inbyggda nätdelen är därför  
ansluten till elnätet så länge stickproppen  
sitter i vägguttaget.  
(for tuner installation)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
English ------------------------------------------------6  
Français -------------------------------------------- 28  
Español --------------------------------------------- 50  
Deutsch--------------------------------------------- 72  
Nederlands ---------------------------------------- 94  
Italiano-------------------------------------------- 116  
Svenska ------------------------------------------- 138  
Dansk --------------------------------------------- 160  
Suomi --------------------------------------------- 182  
Português ---------------------------------------- 204  
Eꢁꢁꢂꢃꢄꢅꢆ ----------------------------------------- 226  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
General Information  
Radio Reception  
Supplied accessories ............................................ 7  
Acknowledgement ............................................... 7  
Environmental information ................................ 7  
Safety information ................................................ 7  
Tuning to radio stations .................................... 18  
Storing preset radio stations .................... 18–19  
Automatic preset programming  
Manual preset programming  
Tuning to preset radio stations ....................... 19  
Preparations  
Tape Operation/Recording  
Rear connections ............................................. 8–9  
Playing tapes ........................................................ 20  
General information on recording ................. 21  
Synchro start CD recording ............................ 21  
Recording from the radio................................. 21  
Maintenance ........................................................ 22  
Power  
Antennas connection  
Speakers connection  
Optional connection ........................................... 9  
Connecting other equipment to your system  
Inserting batteries into the remote  
control .................................................................... 9  
External Sources  
Listening to external sources .......................... 22  
Controls  
Controls on the system and remote  
control ........................................................... 10–11  
Clock/Timer  
View clock............................................................ 23  
Clock setting ....................................................... 23  
Timer setting ....................................................... 23  
To deactivate theTIMER  
To activate theTIMER  
Sleep timer setting ............................................. 24  
Basic Functions  
Plug and Play ........................................................ 12  
Demonstration mode........................................ 13  
Switching the system to Eco Power  
standby mode ...................................................... 13  
Power-saving automatic standby ..................... 13  
Dim mode ............................................................ 13  
Volume control ................................................... 13  
Specifications ........................................... 25  
Sound control ..................................................... 14  
DSC (Digital Sound Control)  
Troubleshooting ............................. 2627  
DBB (Dynamic Bass Boost)  
Karaoke ................................................................ 14  
CD/MP3-CD Operations  
Discs for playback .............................................. 15  
About MP3 disc .................................................. 15  
Loading discs ....................................................... 15  
Playing discs ......................................................... 16  
Replacing discs during playback ...................... 16  
Selecting a desired track/passage.................... 16  
Selecting a desired Album/Title  
(MP3 disc only) ................................................... 16  
Different play modes: SHUFFLE and REPEAT ...  
................................................................................ 17  
Programming the disc tracks ........................... 17  
Erasing the programme ..................................... 17  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Information  
This product complies with the radio  
interference requirements of the European  
Community.  
Safety information  
Before operating the system, check that the  
operating voltage indicated on the typeplate (or  
the voltage indication beside the voltage  
selector) of your system is identical with the  
voltage of your local power supply. If not, please  
consult your dealer.  
Supplied accessories  
– 2 speaker boxes  
– remote control  
– MW loop antenna  
– FM wire antenna  
Place the system on a flat, hard and stable  
surface.  
Place the system in a location with adequate  
ventilation to prevent internal heat build-up in  
your system. Allow at least 10 cm (4 inches)  
clearance from the rear and the top of the unit  
and 5 cm (2 inches) from each side.  
Acknowledgement  
Energy Star  
As an ENERGY STARR  
Partner, Philips has  
determined that this  
product meets the ENERGY  
STARR guidelines for energy efficiency.  
The ventilation should not be impeded by  
covering the ventilation openings with items,  
such as newspapers, table-cloths, curtains, etc.  
Do not expose the system, batteries or discs to  
excessive moisture, rain, sand or heat sources  
caused by heating equipment or direct sunlight.  
Environmental information  
All unnecessary packaging has been omitted.We  
have tried to make the packaging easy to  
separate into three materials: cardboard (box),  
polystyrene foam (buffer) and polyethylene (bags,  
protective foam sheet).  
No naked flame sources, such as lighted candles,  
should be placed on the apparatus.  
No objects filled with liquids, such as vases, shall  
be placed on the apparatus.  
Your system consists of materials which can be  
recycled and reused if disassembled by a  
specialised company. Please observe the local  
regulations regarding the disposal of packaging  
materials, exhausted batteries and old  
equipment.  
Don’t expose the system to dripping or  
splashing.  
Install this unit near the AC outlet and where the  
AC power plug can be reached easily.  
The lens may cloud over when the system is  
suddenly moved from cold to warm  
surroundings, making it impossible to play a disc.  
Leave the system in the warm environment until  
the moisture evaporates.  
Disposal of your old product  
Your product is designed and  
manufactured with high quality  
materials and components,  
which can be recycled and  
reused.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
When this crossed-out wheeled bin symbol is  
attached to a product it means the product is  
covered by the European Directive 2002/96/EC  
When the system is switched to Standby  
mode, it is still consuming some power.  
To disconnect the system from the  
power supply completely, remove the AC  
power plug from the wall socket.  
Please inform yourself about the local separate  
collection system for electrical and electronic  
products.  
Please act according to your local rules and do  
not dispose of your old products with your  
normal household waste.The correct disposal of  
your old product will help prevent potential  
negative consequences for the environment and  
human health.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
FM antenna  
MW antenna  
B
Speaker  
(right)  
Speaker  
(left)  
AM ANTENNA  
FM ANTENNA  
AUX/CDR  
R
L
R
L
-
+
SPEAKERS 6  
C
A
AC power cord  
this happens, let the system cool down  
before reusing it (not available for all versions).  
Rear connections  
The type plate is located at the rear of the  
system.  
For users in the U.K.: please follow the  
instructions on page 2.  
B Antennas Connection  
Connect the supplied MW loop antenna and FM  
antenna to the respective terminals. Adjust the  
position of the antenna for optimal reception.  
A Power  
Before connecting the AC power cord to the  
wall outlet, ensure that all other connections  
have been made.  
MW Antenna  
2
1
WARNING!  
– For optimal performance, use only the  
original power cable.  
– Never make or change any connections  
with the power switched on.  
– High voltage! Do not open.You run the  
risk of getting an electric shock.  
– The machine does not contain any user-  
serviceable parts.  
Fix the claw  
to the slot  
3
MW ANTENNA  
– Modification of the product could result  
in hazardous radiation of EMC or other  
unsafe operation.  
To avoid overheating of the system, a safety  
circuit has been built in. Therefore, your  
system may switch to Standby mode  
Position the antenna as far as possible from aTV,  
VCR or other radiation source.  
automatically under extreme conditions. If  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
FMAntenna  
Optional connection  
The optional equipment and connecting cords  
are not supplied. Refer to the operating  
instructions of the connected equipment for  
details.  
Connecting other equipment to your  
system  
For better FM stereo reception, connect an  
outdoor FM antenna to the FM ANTENNA  
terminal.  
Use a cinch cable to connect AUX to the  
analogue audio out terminals of an external  
equipment (TV,VCR, Laser Disc player, DVD  
player or CD Recorder).  
C Speakers Connection  
Note:  
Front Speakers  
– If you are connecting equipment with a mono  
output (a single audio out terminal), connect it to  
the AUX left terminal. Alternatively, you can use a  
“single to double” cinch cable (the output sound  
still remain mono).  
Connect the speaker wires to the SPEAKERS  
terminals, right speaker to "R" and left speaker to  
"L", coloured (marked) wire to "+" and black  
(unmarked) wire to "-".  
Inserting batteries into the  
remote control  
1
2
Insert two batteries (Type R03 or AAA) into the  
remote control with the correct polarity as  
indicated by the "+" and "-" symbols inside  
the battery compartment.  
Fully insert the stripped portion of the speaker  
wire into the terminal as shown.  
Notes:  
– For optimal sound performance, use the  
supplied speakers.  
– Do not connect more than one speaker to any  
one pair of +/- speaker terminals.  
– Do not connect speakers with an impedance  
lower than the speakers supplied. Please refer to  
the SPECIFICATIONS section of this manual.  
CAUTION!  
– Remove batteries if they are exhausted  
or will not be used for a long time.  
– Do not use old and new or different  
types of batteries in combination.  
– Batteries contain chemical substances, so  
they should be disposed of properly.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls (illustrations on page 3)  
Controls on the system and  
remote control  
! Mode Selection  
ALBUM (-/ +) à á  
SEARCH•TUNING  
for MP3-CD ............. to select previous/next  
album.  
for CD/ MP3-CD .. (press and hold) to search  
backward/forward.  
forTuner ..................... to tune to a lower or higher  
radio frequency.  
1 STANDBY-ON/ ECO POWER (B)  
switches the system on or to Eco Power  
standby/normal standby with clock display.  
2 Source selection – to select the following:  
DISC (CD 1/2/3)  
to select disc tray 1, 2 or 3.  
for Clock .................... to set the hour.  
TUNER  
to select waveband: FM or MW.  
STOP Ç  
for CD/ MP3-CD .. to stop playback or to clear a  
programme.  
forTuner ..................... (on the system only) to stop  
programming.  
for Demo................... (on the system only) to  
activate/deactivate the  
TAPE  
to select tape deck.  
AUX  
to select the input for an additional appliance:  
AUX.  
3 iR SENSOR  
infrared sensor for remote control.  
demonstration.  
for Clock .................... to exit clock setting.  
for Plug&Play ............ (on the system only) to exit  
plug&play mode.  
4 VOLUME (VOL +/-)  
to increase or decrease the volume.  
5 DBB  
to select the desired bass boost level. (DBB 1,  
DBB 2, DBB 3 or DBB OFF).  
PLAYPAUSE ÉÅ  
for CD/ MP3-CD .. to start or interrupt playback.  
6 DSC  
Selects different types of preset sound equaliser  
settings (OPTIMAL,TECHNO, ROCK or JAZZ).  
PRESETí/ë (TITLE)  
for MP3-CD ............ to select previous/next title.  
for CD ........................ to skip to the beginning of  
the current, previous, or next  
track.  
forTuner .................... to select a preset radio  
station.  
for Clock ................... to set the minute.  
7 DISC 1/2/3  
to select a disc tray for playback.  
8 Display screen  
to view the current status of the system.  
9 OPEN•CLOSE  
to open or close the disc tray.  
@ DISC CHANGE  
to change disc(s).  
0 PROGRAM  
# CLOCK•TIMER  
for CD/ MP3-CD .. to programme disc tracks.  
forTuner ..................... to programme preset radio  
stations.  
to view the clock.  
set the clock or set the timer (on the set only).  
$ n  
to connect headphones.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls  
% MIC IN  
to connect microphone  
^ MICVOLUME  
to adjust the mixing level for Karaoke  
& Tape Deck Operation  
RECORD... starts recording.  
PLAY 2 ............ starts playback.  
SEARCHà / á fast rewinds/winds the tape.  
STOP•OPENÇ0  
................................. stops the tape; opens the tape  
compartment.  
PAUSEÅ ....... interrupts recording or playback.  
* Disc tray  
( DISPLAY  
to select disc information display mode.  
) DIM MODE  
to select different brightness for the display  
screen : DIM 1, DIM 2, DIM 3 or DIM OFF.  
¡ SLEEP (TIMER ON/OFF)  
to activate/deactivate or set the sleep timer.  
activates/deactivates the timer function.  
REPEAT  
to playback track(s)/disc(s)/programme  
repeatedly.  
£ SHUFFLE  
turns on/off the random play mode.  
MUTE  
mutes or restores the volume.  
Notes for remote control:  
– First, select the source you wish to control  
by pressing one of the source select keys on  
the remote control (CD orTUNER, for  
example).  
– Then select the desired function (ÉÅ,  
í, ë, for example).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
y
CD1/2/3  
REPEAT  
TUNER  
MUTE  
AUX  
PROGRAM  
SHUFFLE  
VOL  
TITLE  
ALBUM  
DISPLAY  
DIM  
SLEEP  
TIMER  
ON/OFF  
DSC  
DBB  
IMPORTANT!  
Before you operate the system,complete  
the preparation procedures.  
2 PressÉÅagain to start installation.  
All previously stored radio stations will be  
replaced.  
Plug and Play (for tuner installlation)  
Plug and Play allows you to store all available  
To exit without storing the Plug and Play  
Press Çon the system.  
radio stations automatically.  
If you do not complete the Plug and Play  
installation, the function will be restarted when  
you next turn on the main supply again.  
First time setup/power up  
1 When you turn on the main supply, "AUTO  
Notes:  
INSTALL- PRESS PLAY" is displayed.  
– When the power is turned on, the disc tray may  
open and close to initialise the system.  
– If no stereo frequency is detected during Plug  
and Play, "CHECK ANTENNA" will be displayed.  
– During Plug and Play, if no button is pressed  
within 15 seconds, the system will exit Plug and  
Play mode.  
2 PressÉÅ to start installation.  
"PLUG AND PLAY" .... "INSTALL" is  
displayed, followed by "TUNER" and "AUTO".  
PROG starts flashing.  
All available radio stations with sufficient signal  
strength will be stored automatically, starting  
from FM and followed by MW band.  
When all the available radio stations are  
stored or the memory for 40 presets are used,  
the first preset radio station will be played.  
To reinstall Plug and Play  
1 In standby or demonstration mode, press and  
holdÉÅon the system until "AUTO INSTALL  
-PRESS PLAY" is displayed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Demonstration mode  
The system has a demonstration mode that  
shows the various features offered by the system.  
Dim mode  
You can select the desired brightness for the  
display.  
To activate the demonstration  
In standby mode, press and hold STOPÇ for  
5 seconds to switch to demonstration.  
In any source mode (except Eco Power standby  
or standby mode), press DIM MODE  
repeatedly to select DIM 1, DIM 2, DIM 3 or DIM  
OFF display mode.  
To deactivate the demonstration  
Press and hold STOPÇ for 5 seconds to  
switch to standby mode.  
DIM is shown, except for DIM OFF mode.  
Switching the system on  
Press ECO POWER/STANDBY-ON 2.  
The system will switch to the last selected  
source.  
Press DISC (CD 1/2/3), TUNER, TAPE or  
AUX.  
The system will switch to the selected source.  
Volume control  
Adjust VOLUME to increase (turn knob  
clockwise or press VOLUME + on the remote)  
or decrease (turn knob anti-clockwise or press  
VOLUME - on the remote) the sound level.  
Press OPEN•CLOSE or DISC CHANGE.  
The system will switch to the disc source and  
the disc tray will open.  
Switching the system to Eco  
Power Standby mode  
Press ECO POWER/STANDBY-ON 2 in  
the active mode.  
To listen through the headphones  
Connect the headphones plug to  
the n socket at the front of the  
system.  
The system enters Eco power standby (the  
ECO POWER LED is on) or normal standby  
with clock display.  
The speakers will be muted.  
To switch off the volume temporarily  
The volume level (up to a maximum volume  
level of 20), interactive sound settings, last  
selected mode, source and tuner presets will be  
retained in the player's memory.  
Press MUTE on the remote control.  
Playback will continue without sound and  
"MUTE" is displayed.  
To restore the volume, press MUTE again or  
increase the volume level.  
If the system is in normal standby with clock  
display, press and hold ECO POWER/  
STANDBY-ON 2 for 3 seconds or more to  
switch to Eco power standby or vice versa.  
Power-saving automatic standby  
As a power-saving feature, the system will  
automatically switch to Standby mode if you do  
not press any buttons within 15 minutes after a  
disc or tape has stopped playing.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Functions  
Automatic DSC-DBB selection  
The best DBB setting is generated automatically  
for each DSC selection. You can manually select  
the DBB setting that best suits your listening  
environment.  
Sound control  
DSC (Digital Sound Control)  
The DSC feature enables you to enjoy special  
sound effects that have preset equaliser settings,  
providing the best music reproduction.  
1 Press DSC to select : OPTIMAL,TECHNO,  
ROCK or JAZZ.  
The selected DSC is shown.  
DBB (Dynamic Bass Boost)  
There are three DBB settings to enhance the  
bass response.  
Karaoke  
Connect a microphone (not supplied) to the  
system allowing you to sing along with the music  
source.  
1 Press DBB to select : DBB 1, DBB 2, DBB 3 or  
DBB OFF.  
The selected DBB is shown, except for DBB  
OFF mode.  
1 Connect a microphone to the MIC jack.  
Before connecting the microphone, set the  
microphone MICVOLUME to the minimum  
level to prevent howling sound.  
Note:  
– Some discs or tapes might be recorded in high  
modulation, which causes a distortion at high  
volume. If this occurs, switch off DBB or reduce the  
volume.  
2 Press DISC (CD 1/2/3).TUNER.TAPE or  
AUX to select the source to be mixed and start  
playback.  
3 Adjust the volume level of the source with  
MASTERVOLUME control.  
4 Adjust the microphone volume with the  
microphone MICVOLUME control.  
Note:  
– Keep the microphone away from the speakers to  
prevent howling.  
For Recording, please refer to “Tape  
Operation/Recording”.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MP3-CD Operations  
IMPORTANT!  
About MP3 disc  
– This system is designed for regular discs.  
Therefore, do not use any accessories such  
as disc stabiliser rings or disc treatment  
sheets, etc., as offered on the market,  
because they may jam the changer  
mechanism.  
Supported formats  
– ISO9660, Joliet, Multisession  
– Max. track number plus album is 512  
– The max. MP3 program track number is 40  
– SupportedVBR bit-rate  
– Do not load more than one disc into each  
tray.  
– Supported sampling frequencies for MP3 disc  
are: 32 kHz, 44.1 kHz, 48 kHz  
– Supported Bit-rates of MP3 disc are: 32, 64,  
96, 128, 192, 256 (kbps)  
Discs for playback  
This system can playback all digital audio CD,  
finalised digital audio CD-Recordable (CDR) discs  
and finalised digital audio CD-Rewritable  
(CDRW)discs.  
Loading discs  
1 Press OPEN•CLOSE to open the disc tray.  
2 Load up to two discs on the individual disc trays.  
To load the third disc, press DISC CHANGE.  
The disc tray will rotate until the empty tray  
is ready for loading.  
MP3-CDs (CD-ROMs with MP3 tracks)  
1
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MP3-CD Operations  
3 Press OPEN•CLOSE to close the disc tray.  
READINGis displayed as the CD player scans  
the contents of a disc, and then the total number  
of tracks and playing time (or the total number  
of albums and tracks for MP3 disc) are shown.  
Te xt display during playback  
In CD mode  
Press DISPLAY to show the current track  
number and remaining playback time.  
Notes:  
In MP3-CD mode  
– Load the discs with the label side facing up.  
– To ensure good system performance, wait until  
the disc tray completely reads the disc(s) before  
proceeding.  
Press DISPLAY repeatedly to show the current  
album and track numbers followed by ID3  
information (if available).  
– For MP3 disc, the disc reading time may exceed  
10 seconds due to the large number of songs  
compiled into one disc.  
Replacing discs during playback  
1 Press DISC CHANGE.  
The disc tray will open without interrupting  
current playback.  
Playing discs  
2 To change the inner disc, press DISC  
CHANGE again.  
To play current disc on the disc tray  
Press PLAYPAUSE ÉÅ.  
All loaded discs will play once, then stop.  
During playback, the selected disc tray, track  
number and elapsed playing time of the current  
track are displayed.  
"OPEN" is displayed and the disc will stop  
playing.  
The disc tray will close to retrieve the inner  
disc, then reopen with the inner disc accessible.  
For mixed mode discs, only one mode will be  
selected for playback depending on the  
recording format.  
Selecting a desired track/passage  
To search for a particular passage during  
playback  
Press and hold à or á and release it when  
the desired passage is located.  
Note:  
When playing a mixed mode disc, you may find a  
very short mute track inserted into the total  
number of tracks available in your disc.  
During searching, the volume will be reduced.  
To select a desired track  
To play the selected disc only  
In CD mode, press DISC 1/2/3 (or CD 1/2/3  
on the remote control).  
Press í or ë repeatedly until the desired  
track is displayed.  
The current disc will play once, then stop.  
If playback is stopped, press PLAYPAUSE  
ÉÅ to start playback.  
To interrupt playback  
Press PLAYPAUSE ÉÅ.  
The display freezes and the elapsed playing  
time flashes when playback is interrupted.  
Selecting a desiredAlbum/Title  
(MP3 disc only)  
To select a desired album  
Press ALBUM -/+ (à or á) repeatedly.  
To resume playback, press PLAYPAUSE ÉÅ  
again.  
To select a desired title  
Press TITLE -/+ (í / ë) repeatedly.  
To stop playback  
Press STOP Ç.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD/MP3-CD Operations  
For MP3 disc, press ALBUM -/+ and  
TITLE -/+ to select the desired album and  
title for programming.  
Different play modes:SHUFFLE  
and REPEAT  
You can select and change the various play  
modes before or during playback.The play  
modes can also be combined with  
PROGRAMME.  
5 Press PROGRAM to store the track.  
6 To end programming, press STOP 9 once.  
PROG stays and the programme mode  
remains active.  
SHUF ................tracks of the entire disc are  
played in random order  
SHUF REPALL…repeats the entire disc  
continuously in random order  
REPALL ...........repeats the entire disc/  
programme  
7 To start programme play, press PLAY/PAUSE  
2;.  
Notes:  
– It is not possible to create a programme with  
MP3 tracks from multiple CDs, or combined with  
normal audio tracks.  
REP ...................plays the current track  
continuously  
– If you attempt to programme more than 40  
tracks, "PROGRAM FULL" is displayed.  
– During programming, if no button is pressed  
within 25 seconds, the system will exit the  
programme mode automatically.  
1 To select your play mode, press the SHUFFLE  
or REPEAT button before or during playback  
until the display shows the desired function.  
2 Press PLAY/PAUSE 2; to start playback if in  
the STOP position.  
To review the programme  
If you have selected SHUFFLE, playback starts  
automatically.  
Stop playback and pressí or ë repeatedly.  
To exit review mode, press STOP 9.  
3 To return to normal playback, press the  
respective SHUFFLE or REPEAT button until  
the various SHUFFLE/ REPEAT modes are no  
longer displayed.  
Erasing the programme  
Press STOP 9 once when playback is stopped  
or twice during playback.  
PROG disappears and "CLEAR" is displayed.  
You can also press STOP 9 to cancel your play  
mode.  
Note:  
Note:  
– The programme will be erased when the system  
is disconnected from the power supply or when the  
disc tray is opened.  
The SHUFFLE function cannot be used  
simultaneously with PROGRAM.  
Programming the disc tracks  
Programming tracks is possible when playback is  
stopped. Up to 40 tracks can be stored in the  
memory in any order.  
For Recording, please refer to “Tape  
Operation/Recording”.  
1 Load the desired discs on the disc tray (refer to  
“Loading discs”).  
2 Press DISC 1/2/3 (or CD 1/2/3 on the remote  
control) to select a disc.  
3 In stop mode, press PROGRAM to start  
programming.  
PROG starts flashing.  
4 Press í or ë repeatedly to select the desired  
track.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Reception  
y
CD1/2/3  
REPEAT  
TUNER  
MUTE  
AUX  
PROGRAM  
SHUFFLE  
VOL  
TITLE  
MHz  
ALBUM  
DISPLAY  
DIM  
SLEEP  
TIMER  
ON/OFF  
DSC  
DBB  
If a radio station has been stored in one of  
the presets, it will not be stored again under  
another preset number.  
Tuning to radio stations  
1 Press TUNER to selectTUNER mode.  
"TUNER" is displayed. A few seconds later, the  
current radio frequency will appear on the  
display.  
2 Press and hold PROGRAM until "AUTO" is  
displayed.  
PROG starts flashing.  
2 Press TUNER again to select the desired  
AUTOis displayed and available stations are  
programmed in order of waveband reception  
strength.The first preset automatically stored will  
then be played.  
waveband : FM or MW.  
3 Press and hold à or á until the frequency  
indication starts to change, then release.  
When all the available radio stations are  
stored or the memory for 40 presets are used,  
the last preset radio station will be played.  
The display will show "SEARCH" until a radio  
station with sufficient signal strength is found.  
4 Repeat step 3 if necessary until you find the  
desired radio station.  
To stop storing the automatic preset  
Press PROGRAM or STOP 9 on the system.  
To tune to a weak station, press à or á briefly  
and repeatedly until optimal reception found.  
Note:  
– If no preset number is selected, automatic preset  
will begin from preset (1) and all your former  
presets will be overridden.  
Storing preset radio stations  
You can store up to 40 preset radio stations in  
the memory.  
Automatic Preset Programming  
1 Press TUNER to selectTUNER mode.  
To begin automatic preset from a desired  
preset number  
Press í or ë to select the desired preset  
number.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Radio Reception  
Manual Preset Programming  
1 Tune to your desired radio station (refer to  
Tuning to radio stations”).  
2 Press PROGRAM.  
PROG starts flashing.  
The next available preset number is displayed  
for selection.  
To store the radio station to another  
preset number  
Press í or ë to select the desired preset  
number.  
3 Press PROGRAM again to store the radio  
station.  
PROG disappears.  
Repeat steps 1–3 to store other radio stations.  
To exit manual preset mode  
Press STOP 9 on the system.  
Notes:  
– If you attempt to store more than 40 preset  
radio stations, "PROGRAM FULL" is displayed.  
– During programming, if no key is pressed within  
25 seconds, the system will exit the programme  
mode automatically.  
Tuning to preset radio stations  
Once you’ve programmed the radio stations,  
press í or ë to select the desired preset  
number.  
The preset number, radio frequency, and  
waveband are displayed.  
For Recording, please refer to “Tape  
Operation/Recording”.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Operation/Recording  
IMPORTANT!  
5 Press PLAY 2 to start playback.  
– Before playing a tape, check and tighten  
slack tape with a pencil. Slack tape may get  
jammed or may burst in the mechanism.  
– C-120 tape is extremely thin and is easily  
deformed or damaged. It is not  
The key is automatically released at the end of a  
tape, except if PAUSE; has been activated.  
6 To pause, press PAUSE;. Press again to resume.  
7 By pressing à or á on the system fast winding  
recommended for use in this system.  
– Store the tapes at room temperature and  
do not put them too close to a magnetic  
field (for example, a transformer,TV or  
speaker).  
of tape is possible in both directions.  
8 To stop the tape, press STOP•OPENÇ0.  
Note:  
– The sound source cannot be changed while  
playing or recording a tape.  
Tape playback  
1 Select TAPE source.  
2 Open the tape key flap marked “OPEN 2” on  
the front panel.  
3 Press STOP•OPENÇ0to open the tape  
door.  
4 Insert a recorded tape and close the tape door.  
Load the tape with the open side downward and  
the full spool to the left.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Operation/Recording  
To select and record a particular passage  
within a CD track:  
General information on  
recording  
Press and hold down on 4 ¢. Release the  
control when you recognize the passage you  
want.  
To pause CD playback press PLAY/PAUSE 2;.  
Recording starts from this exact point in the  
track when you press RECORD.  
If you do not intend to record via the  
microphone, unplug the microphone to avoid  
accidental mixing with other recording source.  
Recording is permissible insofar as copyright or  
other rights of third parties are not infringed.  
For recording, use only NORMAL (IEC type I)  
tapes on which the tabs have not yet been  
broken.This deck is not suited for recording on  
METAL (IEC IV) type tapes.  
6 To pause, press PAUSE;. Press again to resume.  
7 To stop recording, press STOP•OPENÇ0.  
The recording level is set automatically,  
regardless of the position of theVolume, DBB,  
DSC and so forth.  
The recording sound quality might differ  
depending on the quality of your recording  
source and the recording tape.  
The tape is secured at both ends with leader  
tape. At the beginning and end of the tape,  
nothing will be recorded for six to seven  
seconds.  
To protect a tape from accidental erasure, have  
the tape in front of you and break out the left  
tab. Recording on this side is no longer possible.  
If, however, you wish to record over this side  
again, cover the tabs with a piece of adhesive  
tape.  
Recording from the radio  
1 Tune to the desired radio station (seeTuning to  
radio stations).  
2 Press STOP•OPENÇ0to open the tape  
door.  
3 Insert a suitable tape into the deck and close the  
tape door.  
4 Press RECORDto start recording.  
5 To interrupt playback press PAUSE;.To resume,  
press this key again.  
6 To stop recording, press STOP•OPENÇ0.  
Synchro start CD recording  
1 Select CD source.  
2 Insert a disc and if desired, programme track  
The making of unauthorized copies of copy-  
protected material, including computer  
programmes, files, broadcasts and sound  
recordings, may be an infringement of  
copyrights and constitute a criminal offence.  
This equipment should not be used for such  
purposes.  
numbers.  
3 Press STOP•OPENÇ0to open the tape  
door.  
4 Insert a suitable tape into the deck and close the  
tape door.  
5 Press RECORD to start recording.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Operation/Recording  
Cleaning the Heads and theTape Paths  
To ensure good recording and playback quality,  
clean the heads A, the capstan(s) B, and  
pressure roller(s) C after every 50 hours of  
tape operation.  
Use a cotton swab slightly moistened with  
cleaning fluid or alcohol.  
You can also clean the heads by playing a  
cleaning tape once.  
Maintenance  
Cleaning the Cabinet  
Use a soft cloth slightly moistened with a mild  
detergent solution. Do not use a solution  
containing alcohol, spirits, ammonia or abrasives.  
Cleaning Discs  
When a disc becomes dirty,  
clean it with a cleaning cloth.  
Wipe the disc from the centre  
out.  
Do not use solvents such as  
benzene, thinner, commercially  
available cleaners, or antistatic  
spray intended for analogue records.  
C
B
A
B
C
Cleaning the disc lens  
Demagnetising the heads  
After prolonged use, dirt or dust may  
accumulate at the disc lens.To ensure good  
playback quality, clean the disc lens with Philips  
CD Lens Cleaner or any commercially available  
cleaner. Follow the instructions supplied with  
cleaner.  
Use a demagnetising tape available at your  
dealer.  
External Sources  
Note:  
– All the sound control features (DSC or DBB, for  
example) are available for selection.  
– Refer to the operating instructions for the  
connected equipment for details.  
For Recording, please refer to “Tape  
Operation/Recording”.  
Listening to external sources  
1 Connect the audio out terminals of the external  
equipment (TV,VCR, Laser Disc player, DVD  
player or CD Recorder) to the AUX terminals  
of your system.  
2 Press AUX to select external equipment.  
"AUX" is displayed.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timer  
y
CD1/2/3  
REPEAT  
TUNER  
MUTE  
AUX  
PROGRAM  
SHUFFLE  
VOL  
TITLE  
ALBUM  
DISPLAY  
DIM  
SLEEP  
TIMER  
ON/OFF  
DSC  
DBB  
IMPORTANT!  
Timer setting  
The system can switch on to CD orTUNER  
mode automatically at a preset time, serving as  
an alarm to wake you up.  
– When in Eco Power standby mode, it is  
not possible to operate the clock or timer  
function.  
IMPORTANT!  
– Before setting the timer, ensure that the  
clock is set correctly.  
Clock setting  
The system only supports 24-hour time mode.  
1 In standby or view clock mode, press  
CLOCK•TIMER once. In other source  
mode, press CLOCK•TIMER twice.  
1 Press and hold CLOCK•TIMER for more than  
two seconds to select timer mode.  
The last timer setting starts flashing.  
The selected source will be lighted.  
2 Press à or á repeatedly to set the hour.  
3 Press í or ë repeatedly to set the minute.  
2 Press DISC (CD 1/2/3) or TUNER to select  
the desired source.  
4 Press CLOCK•TIMER again to store the  
setting.  
Before setting timer, make sure the music source  
has been prepared.  
The clock starts working.  
CD – Load the disc(s).To start from a specific  
track, make a programme (refer toCD  
Operation - Programming the disc tracks”).  
TUNER – tune to the desired radio station.  
To exit without storing the setting  
Press STOP Çon the system.  
Notes:  
3 Press à or á repeatedly to set  
– The clock setting will be cancelled when the  
power cord is disconnected or if a power failure  
occurs.  
the hour for the timer to start.  
– During clock setting, if no button is pressed  
within 25 seconds, the system will exit clock setting  
mode automatically.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timer  
4 Press í or ë repeatedly to set the minute for  
To check the remaining length of time  
after sleep timer is activated  
the timer to start.  
Press SLEEP (TIMER ON/OFF) once.  
5 Press CLOCK•TIMER to store the start time.  
At the preset time, the selected source will play.  
To change the preset sleep timer  
Press SLEEP (TIMER ON/OFF) again while  
the remaining sleep timer is shown.  
The display will show the next sleep timer  
options.  
To exit without storing the setting  
Press STOP Ç on the system.  
Notes:  
– When the preset time is reached and the  
selected disc tray is empty, the next available disc  
will be selected. If all the disc trays are not  
available,Tuner will be selected automatically.  
– During timer setting, if no button is pressed  
within 25 seconds, the system will exit timer setting  
mode automatically.  
To deactivate the sleep timer  
Press SLEEP (TIMER ON/OFF) repeatedly  
until "OFF" is displayed, or press STANDBY-  
ON/ ECO POWER (B).  
Note:  
will start flashing when the remaining  
length of time after activation of the sleep timer is  
less than 1 minute.  
To deactivate theTIMER  
Press and hold SLEEP (TIMER ON/OFF) on  
the remote control.  
The display will show "OFF" and  
will  
disappear from the display.  
To activate theTIMER  
Press and hold SLEEP (TIMER ON/OFF) on  
the remote control.  
The last set timer information will be shown  
for a few seconds and  
display.  
will appear on the  
Sleep timer setting  
The sleep timer enables the system to switch to  
standby mode automatically at a preset time.  
1 Press SLEEP (TIMER ON/OFF) on the  
remote control repeatedly to select a preset  
time.  
The selections are as follows (time in  
minutes):  
15304560OFF15…  
2 When you reach the desired length of time, stop  
pressing the SLEEP (TIMER ON/OFF)  
button.  
is shown, except for "OFF" mode.  
The sleep timer is now set.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AMPLIFIER  
TAPE PLAYER  
Frequency response  
Normal tape (type I)...... 125 – 8000 Hz (8 dB)  
Signal-to-noise ratio  
Normal tape (type I)................................. 40 dBA  
Wow and flutter .............................................. 0.4% JIS  
Output power ...................................... 2 x 60W MPO  
.................................................................... 2 x 30W RMS(1)  
Signal-to-noise ratio.......................... 60 dBA (IEC)  
Frequency response ....................... 125 – 16000 Hz  
Input sensitivity  
AUX/CDR In ..................................................... 500 mV  
Microphone .......................................................... 3.5 mV  
Output  
SPEAKERS  
System 1-way; 1 port bass reflex  
Speakers ....................................................................6 Ω  
Impedance........................................................................ 6 Ω  
Woofer ................................................................... 1 x 5.25"  
Tweeter.......................................................................... 1 x 2"  
Dimensions (w x h x d) . 222 x 310 x 220 (mm)  
Weight ................................................................ 2.9 kg each  
Headphones............................................................. 32 Ω  
(1) (6 , 1 kHz, 10%THD)  
CD/MP3-CD PLAYER  
Number of programmable tracks ......................... 40  
Frequency response .......... 125 – 16000 Hz -3dB  
Signal-to-noise ratio....................................... 75 dBA  
Channel separation .......................... 50 dB (1 kHz)  
Total harmonic distortion................................. < 0.6%  
MPEG 1 Layer 3 (MP3-CD) .......... MPEG AUDIO  
MP3-CD bit rate ....................................... 32-256 kbps  
(128 kbps advised)  
GENERAL  
Material/finish ................................... Polystyrene/Metal  
AC Power .....................................220 – 240V / 50 Hz  
Power Consumption  
Active ......................................................................... 70 W  
Standby .................................................................. 15 W  
Eco Power standby .......................................... 1 W  
Dimensions (w x h x d) .. 265 x 310 x 384 (mm)  
Weight (without speakers) ................................. 5.7 kg  
Sampling frequencies .......................32, 44.1, 48 kHz  
TUNER  
FM wave range ................................... 87.5 – 108 MHz  
MW wave rang................................... 531 – 1602 kHz  
Number of presets ........................................................ 40  
Antenna  
Specifications and external appearance are  
subject to change without notice.  
FM ....................................................................... 75 wire  
MW............................................................ Loop antenna  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
WARNING  
Under no circumstances should you try to repair the system yourself, as this will invalidate the  
warranty. Do not open the system as there is a risk of electric shock.  
If a fault occurs, first check the points listed below before taking the system for repair. If you  
are unable to remedy a problem by following these hints, consult your dealer or Philips for  
help.  
Problem  
Solution  
NO DISC” is displayed.  
Insert a disc.  
Check if the disc is inserted upside down.  
Wait until the moisture condensation at the lens  
has cleared.  
Replace or clean the disc, see “Maintenance”.  
Use a finalized CD-RW or a correct MP3-CD  
format disc.  
Use a finalised CD-RW or CD-R.  
DISC NOT FINALIZED” is displayed.  
If the signal is too weak, adjust the antenna or  
connect an external antenna for better  
reception.  
Increase the distance between the Mini HiFi  
System and yourTV orVCR.  
Radio reception is poor.  
Recording or playback cannot be made.  
Clean deck parts, see “Maintenance”.  
Use only NORMAL (IEC I) tape.  
Apply a piece of adhesive tape over the missing  
tab space.  
Remove and reconnect the AC power plug and  
switch on the system again.  
The system does not react when buttons  
are pressed.  
Adjust the volume.  
Disconnect the headphones.  
Check that the speakers are connec ted  
correctly.  
Sound cannot be heard or is of poor  
quality.  
Check if the stripped speaker wire is clamped.  
Make sure the MP3-CD was recorded within  
32-256 kbps bit rate with sampling frequencies  
at 48 kHz, 44.1 kHz or 32 kHz.  
Check the speaker connections and location.  
The left and right sound outputs are  
reversed.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
The remote control does not function  
properly.  
Select the source (CD orTUNER, for example)  
before pressing the function button (É,í,ë).  
Reduce the distance between the remote  
control and the system.  
Insert the batteries with their polarities  
(+/– signs) aligned as indicated.  
Replace the batteries.  
Point the remote control directly towards the IR  
sensor.  
The time is not working.  
Set the clock correctly.  
Press and holdTIMER ON/OFF to switch on the  
timer.  
If recording or tape dubbing is in progress, stop  
recording.  
Not all lighted buttons are showing light.  
The Clock/Timer setting is erased.  
Press DIM to select DIM OFF display mode.  
Power has been interrupted or the power cord  
has been disconnected. Reset the clock/timer.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  

QSC Audio Stereo Amplifier GX3 User Guide
Quadra Fire Patio Heater 839 1390 User Guide
Rangemaster Cooktop LEIHDC70BB User Guide
RCA Microcassette Recorder RP3528 User Guide
Roper Clothes Dryer EL4030V User Guide
Scag Power Equipment Lawn Mower GC STT User Guide
Seagate Computer Drive ST980825A User Guide
Seagate Computer Drive STBM2000100 User Guide
Sears Planer 14923632 User Guide
Senco Nail Gun FinishPro 32 User Guide