PLMRKT4A
4 CHANNEL WATERPROOF AMPLIFIED
6.5” MARINE SPEAKER SYSTEM
PLMRMP3A
4 CHANNEL WATERPROOF
MARINE POWER AMPLIFIER
OWNER’S MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
PLMRMP3A 4 Channel Waterproof Marine Power Amplifier
● 4 x 100 Watts RMS at 4 Ohms
● 4 x 200 Watts Max at 4 Ohms
● 4 x 300 Watts RMS at 2 Ohms
● Electronic Crossover Network
● 2 Ohms Stereo Stable
● Anti-Thump Turn-On
● Soft Turn On/Off
● Adjustable High Low Level Inputs
● RCA Line Input
● Power Protection Circuitry
● Volume Gain Remote Control
● T.H.D: <0.05%
● S/N Ratio: >95dB
● Channel Separation: >65dB
● Frequency Response: 10Hz- 40kHz
● Fuse : 10A
● Dimensions: 6.10”Lx3.35”Wx1.38”H
Accessories:
● iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor
● Remote Control for Volume Gain
What is inclued?
When first unpacking your new amplified marine speaker system, Please
check first that the package contains all of the items below. If something
is missing, contact the store where you purchased the product.
PLMRKT4A
Two Pairs 6.5'' 2-Way Marine Speaker
One Piece PLMRMP3A
One Piece iPod / MP3 Waterproof Poly Bag
One Piece iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor
One Piece Remote Control for Volume Gain
PLMRMP3A
One Piece 4 Channel Waterproof Marine Power Amplifier
One Piece iPod / MP3 Waterproof 3.5mm Stereo to RCA Adaptor
One Piece Remote Control for Volume Gain
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls, Input and Output Cables:
Installation precautions
1
2
Before you drill or cut any holes, investigate your vessel’s layout very carefully.
Take special care when you work near the gas tank, fuel lines, hydraulic lines
and electrical wiring.
3
dB GAIN
+
MAX
MIN
Never operate the amplifier when it is unmounted. Attach all audio system
components securely within the amplifier to prevent damage, especially in an
accident.
Do not mount this amplifier so that wire connections are unprotected. in a
pinched condition, in contact with any metal surfaces in your marine vessel,
or likely to be damaged by nearby objects.
4
The switches and gain settings are located behind a watertight plug, which
also lights up when the amplifier is on. Be sure to replace the plug when
finished with adjustments
Before making or breaking power connections in your system, disconnect the
marine vessel battery. Confirm that your head unit or other equipment is turned
off while connecting the input jacks and speaker terminals.
1
The INPUT LEVEL switch selects the input sensitivity of the amplifier. If
you are connecting to a LINE level source (typically any RCA type
connection) then the switch should be in the LINE (out) position. When
connecting to loudspeaker outputs or headphone or high level sources
then set the switch to the SPEAKER (in) position.
If you need to replace the power fuse, replace it only with a fuse idenetical to
that supplied with the amplifier, Using a fuse of a different type or rating may
result in damage to your audio system or your amplifier which is not covered
by the manufacturer’s warranty.
2
The POLARITY switch allows the user to optimize bass performance in
the case that there are more than 1 set of loudspeakers producing bass
in the system. Play some music with strong bass content and listen with
the switch alternately in the NORMAL and REVERSE position until it can
be determined which setting results in more pleasing bass response. If
in doubt, or if any interaction with other speakers is unlikely, then leave
the switch in the NORMAL position.
Don’t misuse the level control!
Do not mistake the input level control for a volume control! It is designed
ONLY to match the output level of your audio source to the input level of
your amplifier.
3
The GAIN control adjusts the overall level of the amplifier. When using
the amplifier without volume control the level should beset to achieve a
balance with other loudspeakers in the system. As arule, keep the gain
setting as low as possible while still insuring that the system will reach
full output power. When using the system with external volume control,
set the external Volume Control to FULL (clockwise) and adjust the gain
on the amplifier until full output power is reached. Full output power level
can be determined by turning the gain control clockwise until the apparent
loudness does not appear to increase any more. Leave the control at the
setting where this begins to become apparent.
Do not adjust this input level to maximum unless your input level requires it.
Ignoring these instructions will result in an input overload to the amplifier,
and excessive audio distortion. It can also cause the protection circuit to
engage.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|