proline
Range Hoods
For model numbers:
PLJW109 / PLFW108 / PLJW125 / PLJW129
user manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1
Saftey Notice
1
2
Diagrams
2-7
. 2
. 3
Wall Hood .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Control Panel .
Filters .
Venting .
.
.
.
.
. 4-5
. 6-7
3
Installation
8-11
Preparation
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
. 8
Wall Hood .
Care & Cleaning
Troubleshooting
. 9-11
12-13
14
4
5
6
Purchase Information
15-17
Warranty
Returns .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
15
16
17
Exchanges .
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
IMPORTANT SAFETY NOTICE
1
Installer: Leave this guide with the homeowner.
Consumer: Keep this guide for future reference.
The Important Safety Notice and warnings in this manual are not meant to cover all
possible problems and situations that can occur. Use common sense and caution when
installing, maintaining or operating this or any other appliance.
Always contact the PROLINE Customer Support Team (1-877-901-5530) with any prob-
lems or situations that you do not understand.
Safety Symbols and Labels
danger
To avoid the possibility of explosion or fire, do not store or use combustible, flammable
or explosive vapors and liquids (such as gasoline) inside or in the vicinity of this or
any other appliance. Keep items that could explode (such as aerosol cans) away from
cooktop burners, ovens and range hoods. Do not store flammable or explosive materials
in adjacent cabinets or surrounding areas.
warning
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,
OBSERVE THE FOLLOWING:
1. Use this unit only in the manner intended by the manufacturer. If you have
questions, contact PROLINE Customer Support.
2. Before servicing or cleaning your hood, turn the power off.
General Safety Precautions:
To reduce the risk of fire, electric shock, serious injury or death when using your range hood,
follow basic safety precautions, including the following:
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY NOTICE
1
warning
♦ If you receive a damaged product, immediately contact PROLINE Customer Support. Do not
install or use a damaged hood.
♦ Do not install, repair or replace any part of the range hood unless specifically recommend-
ed in the literature accompanying it.
♦ Use the range hood only for its intended purpose as outlined in this manual. DO NOT use
this range hood to vent hazardous or explosive materials or vapors.
♦ Do not tamper with the controls.
♦ Never allow the filters to become blocked or clogged. Do not allow foreign objects, such as
cigarettes or napkins, to be sucked into the hood.
♦ If the cooktop and range hood are near a window, use an appropriate window treatment.
Avoid long drapes or other window coverings that could blow over the cooktop and hood,
resulting in a fire hazard.
♦ Always run the blower(s) while the cooktop is operating.
♦ Do not leave children or pets alone or unattended in the area while the cooktop and range
hood are in use. .
♦ The minimum vertical distance between the cooking surface and the exterior part of the
hood must be no less than 28” (71 cm). The vertical distance may be longer for the range
or cooktop being used.
To reduce the risk of a range top grease fire:
1. Never leave surface units unattended at high settings. Boil-overs cause smoking and greasy
spills that may ignite. Heat oils slowly on low or medium settings.
2. Always turn hood ON when cooking at high heat
3. Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or
filter.
To reduce the risk of injury to person in the event of a range top grease fire:
4. SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn off the
burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out immediately, EVACU-
ATE AND CALL THE FIRE DEPARTMENT.
5. NEVER PICK UP A FLAMING PAN - you may be burned.
6. DO NOT USE WATER, including wet dish clothes or towels - a violent steam explosion may
result.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
|
PROLINERANGE HOODS
Wall Hood
b
a
c
E
d
A - HOOD directs heat and smoke into the hood’s internal blower system. The
blower forces heat and smoke from cooking into the chimney.
B - CHIMNEY vents air from cooking to the outside of the home.
C - CONTROL PANEL - controls the hood’s various features.
D - FILTER(S) - Stainless steel baffle filters prevent grease and grime from get-
ting into the blower(s). The number and type of filters depends on the model.
E - LIGHTS - 20 Watt halogen lights. The number of lights depends on the
model.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
3
Control Panel
Lights: 2 levels, high and low. Tap button to turn on or off. Tap again to go
between high and low light levels.
Speeds: 4 speeds. Press the button of your desired fan speed. The lowest
speed is the most quiet. The highest speed is the most powerful.
Power: Press the power button once to turn on, press twice to turn off.
Auto-shutoff: While the fan is running at any speed, press the power button
once. The flashing blue light indicates the auto-shutoff is activated, and the
power will shut off in 3 minutes from activation. If you wish to turn off your
hood before the 3 minutes, just press the Power button again.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
|
PROLINERANGE HOODS
grease filters
baffle filter
The baffle filter is equipped with a spring
loaded handle. To remove from the hood,
pull back toward the wall and down.
The baffle filter can also be opened for
easy cleaning. To open unscrew the cylin-
drical handle and separate the layers to
clean..
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
5
ductless filters
charcoal filter
We recommend venting your hood directly outdoors if at all possible. If you do
not have the option to vent your hood outside, charcoal filters are a convenient
alternative. These filters clean impurities and odors from the air as it recirculates
through your home. There are two styles of charcoal filters - round and square.
The type you receive with your order will depend on the model of your hood.
Square
Round
1. Remove the stainless steel or aluminum filters from the bottom of the hood.
2. Locate the existing raised support screws (A) on each side of the internal
motor(s).
3. For each motor side, position charcoal filter over its support screw and rotate
to lock into place.
Please note: We recommend you replace your charcoal filters after 150 hours
of cooking, or every 3-6 months, depending on how often you cook.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
|
PROLINERANGE HOODS
venting options
horizontal wall venting
Option 1
Option 2
vertical roof venting
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
7
venting requirements
height & venting requirements
For best operation, we recommend you:
♦ allow 28-36” between the top of your
cooking surface and the bottom of
hood
♦ vent vertically through the roof if
possible
♦ vent through a side wall if you can-
not vent directly above your range
hood
♦ use 6” or 8” round (or 3-1/4 x 10”
rectangular) metal ducting
♦ use as few elbows as possible, with
no more than three 90° elbows.
♦ make sure there is at least 24” of
straight vent between any elbows
♦ use silver or duct tape to seal all
joints in the vent system
♦ use caulking to seal exterior open-
ings around the cap
♦ always use metal or aluminum ducts
for maximum airflow
♦ always keep the duct clean to en-
sure proper airflow
DO NOT:
♦ terminate the vent system into an attic or
other enclosed area
♦ use 4” (10.2 cm) laundry-type wall caps
♦ use plastic venting
warning
It is important to install the hood at the proper mounting height. Hoods mounted too
low could result in heat damage and fire hazard. Hoods mounted too high will be
hard to reach and will lose performance and efficiency.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
|
PROLINERANGE HOODS
preparation
inspect range hood
1. Check contents of box:
♦ range hood
♦ wall or ceiling mounting bracket
♦ small bag of hardware
♦ chimney (only on certain models)
♦ support brackets (only on certain models)
♦ transition duct (only on certain models)
2. Test
♦ plug in and test controls, lights, fan
♦ inspect for any damage during shipping
♦ you must report any damage to Proline within 7 days for a refund
tools you’ll need:
♦ power drill
♦ screwdrivers
♦ drill bit
♦ tape measurer
♦ marking pencils
♦ duct tape aluminum backed
♦ level
♦ wall anchors (Make sure to buy the right kind. Hardware stores can help.)
prepare ductwork
Ductwork should already be punched through celling (or the wall if ceiling is not
an option) and ready to hook up to the range hood before beginning installa-
tion. See venting requirements on page 7 of this user manual.
If you are not venting to the outside of your home, be sure to install your
charcoal filters before mounting the hood to the wall. See information on char-
coal filters on page 5 of this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
9
wall hood installation
Plan where the ductwork will be located. Install proper-sized duct work, and roof or wall
cap, depending on where you will be venting your hood. Recommended and most com-
mon installations are shown in the venting diagrams above. Adjust your measurements
to accomodate heights of ceilings, cabinets, or rangetops.
step 1 Install anchors and screws
Markings you’ll need:
♦ center line of installation area
♦ location of studs
♦ horizontal line 28” - 36” above the
cook top (this is where the bottom of
the range hood will be)
Use one panel of the cardboard ship-
ping box to trace an outline of the
hood.
♦ Place the cardboard panel against the
range hood and trace an outline
♦ Find the center point of range hood
(directly between mounting holes) and
mark it on the cardboard panel
♦ Find the mounting points on the hood
and mark them on the panel
♦ Transfer the panel to the wall, lining
the bottom of panel to the horizontal
line
♦ Line up the center point of the panel
with center point on the wall
♦ Find mounting points on the card-
board and poke holes through it,
marking where you will mount the
hood to the wall.
♦ Predrill holes where your mounting
marks are, then insert wall anchors
and mounting screws
Download from Www.Somanuals.com. All Manuals Search And Download.
10
|
PROLINERANGE HOODS
wall hood installation
Install ceiling bracket
step 2
♦ Place the chimney bracket against the ceiling
♦ Find the center point of the bracket and mark
it
♦ Line the bracket center point with the center
point on the wall
♦ Mark the locations of bracket holes on wall
♦ Drill holes into the wall where you’ve marked
♦ Install wall anchors into these holes
♦ Screw ceiling bracket into place
♦ Chimney will mount on this bracket
Hang hood and connect
step 3
♦ Carefully hang the hood on the wall, attaching it
to the studs using the screws already in place
♦ Line up bottom of range hood with your bottom
line on the wall
♦ Tighten and anchor the hood to the wall
♦ Make sure to anchor the hood to a stud so the
wall can support the weight of the range hood
♦ Attach your ductwork to the top of the hood
♦ Duct tape into place
♦ Find the three pronged plug and connect to an
electrical outlet
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
11
wall hood installation
Install chimney
step 4
♦ Take off protective laminate coating
♦ Place the chimney on top of range hood base
♦ Make sure the chimney is facing the correct
direction (the vertical vent should be on the
top)
♦ Secure the lower portion of the chimney to the
base of the hood
♦ Attach the chimney to the ceiling mounting
bracket
♦ Screw the chimney into place on both sides
♦ Now the chimney is secured to the ceiling and
wall
Install grease filter
step 5
♦ Peel off any protective tape or film.
♦ Pop spring loaded filter into place
♦ That’s it! Now you’re ready to try out your new
range hood
Download from Www.Somanuals.com. All Manuals Search And Download.
12
|
PROLINERANGE HOODS
Care & Cleaning
warning
♦ Never put your hand into the area housing the fan while the fan is operating
♦ Turn off power to the hood before cleaning
♦ Make sure your cooktop and hood are cool before cleaning
♦ Use only the types of cleaning solutions mentioned in this manual
♦ Completely dry the filter(s) immediately after cleaning
cleaning exterior surfaces
♦ Regular care will help preserve the appearance of your range hood.
♦ Always wipe stainless steel surfaces with the grain to avoid scratches
♦ Clean periodically with hot soapy water and clean cotton cloth.
♦ For heavier soil, use a liquid degreaser such as 409™ or Fantastic™.
♦ If hood looks splotchy, use a stainless steel cleaner on the surface. Promptly
and gently remove cleaner with a soft towel or wipe.
♦ After cleaning, you may use non-abrasive stainless steel polish (such as 3m™ or
ZEP™) to buff out stainless luster. Always scrub lightly and with a clean cotton
cloth.
DO NOT:
♦ Use corrosive or abrasive detergent (eg, Comet Power Scrub™ or EZ-Off™
oven cleaner).
♦ Use steel wool or scouring pads, which will scratch and damage the stain-
less steel surface.
♦ Leak cleaning solution onto or into the control panel
♦ Allow deposits to accumulate or remain on the hood
♦ Allow salt solutions, disinfectants, bleaches, or cleaning compounds to re-
main in contact with the stainless steel for extended periods.
cleaning the filter
All PROLINE hoods come with either an aluminum mesh or stainless steel baffle filter.
Both types of filters are dishwasher safe for easy cleaning. If handwashing your filter,
follow the instructions in the “Cleaning Exterior Surfaces” section above.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
13
13
|
PROLINERANGE HOODS
Care & Cleaning
replacing the light bulb
♦ Make sure the range hood is unplugged or turn OFF breaker
♦ Place a flat-head screwdriver between light cover and housing to remove cover
♦ Gently pull defective bulb straight out and discard
♦ Wear a cotton glove or use a cloth to handle the replacement bulb (DO NOT
handle with bare fingers as this may shorten the life of the bulb)
♦ Push gently but securely into light socket. (DO NOT push too hard as bulb legs
may break off)
♦ Replace light cover
♦ Turn ON breaker and range hood to test operation
removing the filter
♦ The filter (A) is located on the bottom of the hood, directly above the cooking
surface.
♦ Hold the filter in place with one hand and pull back on the release lever (B)
with the other.
♦ While pulling back on the release lever, lower the filter out of the hood. On
hoods with more than one filter, remove, clean and replace all of the filters.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
|
troubleshooting
NOTHING WORKS (Control Panel not lit, Blower not working)
Solution 1: Turn on power at circuit breaker panel or fuse box. Check for
tripped breaker or blown fuse.
Solution 2: Make sure hood main power switch is on.
LIGHTS NOT TURNING ON
Solution 1: see “nothing works”
Solution 2: Swap out lights to determine if bulbs are defective.
RANGE HOOD VIBRATES WHEN BLOWER IS ON
Solution: Make sure the range hood has been secured properly to the ceiling
or wall.
BLOWER SYSTEM SEEMS WEAK
Solution 1: Increase the fan speed, ensure that it is at a high enough setting.
Solution 2: Make sure the ducting is sized correctly. Range hood will not
function efficiently with insufficient duct size (IE, 9” duct over 8” hole)
Solution 3: Check to see if duct is clogged or if damper unit (half-circular
flapper) is installed incorrectly. A tight mesh on a side wall cap unit might
also cause restriction to the air flow.
AIR NOT VENTING OUT PROPERLY
Solution 1: Make sure there is at least 28” (71 cm) between the stove top
and the bottom of the hood
Solution 2: Reduce the number of elbows and length of duct work. Check to
ensure all joints are properly connected, sealed, and taped.
Solution 3: Make sure power is on high speed for heavy cooking.
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MANUAL
|
15
Warranty
All PROLINE range hoods come with a Two Year Warranty on Parts, and a One
Year Warranty on Labor.
Who is Covered:
Only the original purchaser for residential products purchased in the continental
United States (limited warranty in Canada, Hawaii, and Alaska).
Two Year Warranty - Parts & Labor
For two years from the date of original purchase, we will repair or replace any
parts or components that failed due to manufacturing defects. We will also pay
for any labor costs associated with installation or replacement of defective parts.
Save a receipt of your repair bills and contact us for a reimbursement.
One Year Warranty - Parts Only
For one year from the date of original purchase, we will repair or replace any
non-consumable parts or components that failed due to manufacturing defects.
What is NOT Covered:
♦ Consumable parts such as light bulbs and filters (stainless, aluminum, or
charcoal)
♦ Damage due to natural wear, improper maintenance, or use of abrasive
cleaning products
♦ Chips, dents, or cracks due to abuse, misuse, or improper installation
♦ Damage caused by accident, fire, floods, or natural disaster
Download from Www.Somanuals.com. All Manuals Search And Download.
16
|
PROLINERANGE HOODS
Returns
upon receipt of your hood:
1) Inspect your hood for any damage in shipping
2) Plug in and test controls (lights, fan)
3) Call 1-877-901-5530 within 7 days to report any damage
Please note: you must report any damage directly to PROLINE within 7 days of
receipt if you wish to receive a replacement or refund.
returns
Damaged Returns
1. You must report damage directly to PROLINE within 7 days to receive a full
refund.
2. Send a photo showing the damage. We need this before we can approve your
damage claim.
3. Once your claim is approved, we will arrange for a damage pickup.
4. A new replacement hood will be sent to you after the damaged hood has been
received and inspected.
Please Note: Free returned shipping only applies to 48 contiguous United
States. Hawaii, Alaska and Canada must pay regular shipping rates.
Undamaged Returns
1. Contact PROLINE Customer Support within 30 days with your intent and reason
for refund
2. You will pay a 20% factory restocking fee
3. You will be responsible for all returned shipping costs. We can help arrange for
a pickup if requested.
Download from Www.Somanuals.com. All Manuals Search And Download.
Exchanges
exchanges
1. You must request an exchange directly to PROLINE within 14 days.
2. Notify us of your reason for the exchange. Provide a photo if your hood is
damaged.
3. We will help arrange for returned shipping of your hood.
4. Once we receive your original hood, we will send the replacement hood.
Please Note:
♦ We will only allow one undamaged exchange per purchase.
♦ Your replacement hood must be of equal or lesser value.
♦ If the value of your replacement hood is higher, you will be responsible for
paying the difference in price.
return claims not accepted if:
♦ Hood has been installed
♦ Hood has been custom cut or otherwise altered
♦ Damage is reported after 7 days
♦ Original packaging or parts are missing
Contact:
PROLINE Range Hoods
1-877-901-5530
Download from Www.Somanuals.com. All Manuals Search And Download.
PROLINERange Hoods
Download from Www.Somanuals.com. All Manuals Search And Download.
|