¨
Model No. PFTL78580
Serial No.
USER'S MANUAL
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satis-
faction through direct assistance
from our factory.
TO AVOID UNNECESSARY DE-
LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our Customer Hot Line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
New products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
DANGER:
To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12. Keep the power cord and the surge protector
away from heated surfaces.
13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 5 if the tread-
mill is not working properly.)
2. Use the treadmill only as described in this
manual.
3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.
14. Never start the treadmill while you are
standing on the walking belt.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
15. Always hold the handrails while running on
the treadmill. When walking, hold the
handrails or use the included hand weights.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
16. Do not perform exercises with the hand
weights at speeds higher than a walk. Using
weights and not holding the handrails may
compromise your ability to maintain your
balance. Exercises using weights should be
attempted only by experienced users.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should not be used by persons
weighing more than 250 pounds.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
8. Never allow more than one person on the
treadmill at a time.
18. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord and move the on/off switch to
the off position when the treadmill is not in
use. (See the drawing on page 5 for the loca-
tion of the on/off switch.)
10. When connecting the power cord (see page 7),
plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO MOVE
THE TREADMILL on page 15.) You must be
able to safely lift 45 pounds (20 kg) in order to
raise, lower, or move the treadmill.
11. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Do not change the incline of the treadmill by
placing objects under the treadmill.
25.
DANGER:
Always unplug the power
cord immediately after use, before cleaning
the treadmill, and before performing the main-
tenance and adjustment procedures de-
scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.
22. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
23. Inspect and tighten all parts of the treadmill
regularly.
24. Never drop or insert any object into any
opening.
26. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer-
cial, rental, or institutional setting.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
SAVE THESE INSTRUCTIONS
The decals shown have been placed
on your treadmill. If a decal is miss-
ing, or if it is not legible, please call
our Customer Service Department,
toll-free, to order a free replacement
decal (see ORDERING REPLACE-
MENT PARTS on the back cover of
this manual). Apply the decal in the
location shown.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the PROFORM¨ 785EX tread-
mill. The 785EX treadmill combines advanced technol-
ogy with innovative design to let you enjoy an excellent
form of cardiovascular exercise in the convenience and
privacy of your home. And when youÕre not exercising,
the unique 785EX can be folded up, requiring less than
half the floor space of other treadmills.
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is PFTL78580. The serial num-
ber can be found on a decal attached to the treadmill
(see the front cover of this manual for the location).
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department toll-free
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
Water Bottle
Holder (Bottle
not included)
Book Holder
Accessory Holder
Hand Weights
Handrail
Storage Latch
Key/Clip
Pulse
Sensor
LEFT SIDE
RIGHT SIDE
Walking Belt
On/Off Switch
Circuit
Breaker
Foot Rails
Front
Wheel
Power
Cord
Cushioned Walking Platform
Rear Roller
Adjustment Bolts
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. No tools are required for assembly.
Note: The treadmill walking deck is coated with high-performance lubricant. During shipping, a small amount of
lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and
does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant
with a soft cloth and a mild, non-abrasive cleaner.
1. With the help of a second person, carefully raise the
Uprights (15) until the treadmill is in the position shown.
1
15
2. Make sure the Lock Knob Sleeve (93) is fully inserted
into the left Upright (15). Remove the Lock Knob (92)
2
from the Lock Pin (97). Make sure that the Lock Pin
Collar (95) and the Spring (94) are on the Lock Pin.
15
Insert the Lock Pin into the left Upright (15) and tighten
the Lock Knob onto it.
94
95
92
97
93
3. Remove the backing from the Adhesive Clip (29). Press
the Adhesive Clip onto the base of one of the Uprights
(15). Press the Allen Wrench (24) into the Adhesive Clip.
3
24
15
29
4. Make sure that all parts are tightened before you use the treadmill. Place a mat under the treadmill to
protect the floor or carpet.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBETM WALKING BELT
electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge
protector, and plug the surge protector into an ap-
propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.
Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat-
form. They will deteriorate the walking belt and
cause excessive wear.
This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus-
trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep-
tacle as shown in drawing 2 if a properly grounded out-
let is not available.
HOW TO PLUG IN THE POWER CORD
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet in-
stalled by a qualified electrician.
The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.
The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box
covers are not grounded. Contact a qualified elec-
trician to determine if the outlet box cover is
grounded before using an adapter.
Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can re-
sult from weather conditions or from other appliances
being turned on or off.
To decrease the pos-
sibility of your tread-
1
Grounded Outlet Box
mill being damaged,
always use a surge
protector (not in-
cluded) with your
treadmill.
Treadmill Power Cord
Grounding Pin
Grounding Plug
Grounding Plug
Grounding Pin
Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL-
listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.
Grounded Outlet
2
Grounded Outlet Box
Adapter
Grounding Pin
Grounding Plug
This product must be
grounded. If it should
malfunction or break
Surge Protector
down, grounding pro-
vides a path of least re-
sistance for electric cur-
rent to reduce the risk of
Lug
Metal Screw
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
Program Indicators
LED Matrix
and Track
Displays
Displays
Program Indicators
Manual Indicator
Clip
Note: If there is a sheet of clear plastic
on the face of the console, remove it.
Key
treadmill and six programs control the speed of the
treadmill as they guide you through effective workouts.
You can even create custom workout programs and
save them in the consoleÕs memory for future use.
CAUTION:Before operating the
console, read the following precautions.
¥ Do not stand on the walking belt when turn-
ing on the power.
An optional chest pulse sensor adds even more features
to the console. The chest pulse sensor continuously
monitors your heart rate during your workouts and
offers hands-free operation. To purchase an optional
chest pulse sensor, refer to page 14.
¥ Always wear the clip (see the drawing above)
while operating the treadmill. If the key is
pulled from the console, the walking belt will
automatically stop.
STEP-BY-STEP CONSOLE OPERATION
¥ Adjust the speed in small increments to
avoid sudden jumps in speed.
Note: The treadmill console can display speed and
distance in either miles or kilometers (see SPEED/
PACE DISPLAY on page 9). For simplicity, all instruc-
tions in this section refer to miles.
¥ To reduce the possibility of electric shock,
keep the console dry. Avoid spilling liquids
on the console, and place only a sealed
water bottle in the water bottle holder.
To operate the console,
first make sure that the
on/off switch, located
On
Position
near the power cord, is
in the on position.
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features to help you get the most from your workouts.
When the manual mode is selected, the speed and
incline of the treadmill can be changed with a touch of a
button. As you exercise, the LED track and four displays
will provide continuous exercise feedback. With the
built-in pulse sensor, you can even measure your heart
rate.
Next, plug in the power cord (see HOW TO PLUG IN
THE POWER CORD on page 7).
Step onto the foot rails of the treadmill. Find the clip
attached to the key (see the drawing above), and slide
the clip onto the waistband of your clothing. Follow the
instructions on pages 9 to 13 to operate the console.
In addition, the console offers ten workout programs.
Four programs automatically control the incline of the
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow your progress with the LED track and
the four displays.
HOW TO USE THE MANUAL MODE
5
Insert the key into the console.
The LED TrackÑ
When the manual
1
A moment after the
key is inserted, the
four displays, the
LED track, and
various indicators
will light.
mode is selected, the
LED matrix will display
a track. The track rep-
resents a distance of
1/4 mile. As you exer-
cise, the indicators around the track will light one at
a time until you have completed 1/4 mile. A new lap
will then begin.
Select the manual mode.
2
When the key is
DISTANCE/LAPS
displayÑThis display
shows the distance that
the walking belt has
inserted, the manual
mode will be selected,
as shown by the
Indicator
manual indicator. If
you have selected a
workout program,
press the mode button repeatedly until the manual
indicator lights.
moved and the number
of 1/4-mile laps you
have completed. The display will alternate between
one number and the other every seven seconds;
the indicator will light when the number of laps is
shown.
Press the START button and adjust the speed
of the walking belt.
3
TIME/INCLINE
displayÑThis display
A moment after the START button is pressed, the
walking belt will begin to move. Hold the handrails
and carefully begin walking.
shows the elapsed time
and the incline level of
the treadmill. The
display will alternate
As you exercise, change the speed of the walking
belt as desired by pressing the SPEED buttons.
Each time one of the buttons is pressed, the speed
will change by 0.1 mph. The buttons can be held
down to change the speed setting quickly. Note: It
may take a few seconds for the walking belt to
reach the selected speed setting.
between one number and the other every seven
seconds; the indicator will light when the incline is
shown. Note: When a workout program is se-
lected, the display will show the time remaining in
the program.
SPEED/PACE
displayÑThis display
To stop the walking belt, press the STOP button.
The TIME/INCLINE display will begin to flash. To
restart the walking belt, press the START button
again. To stop the walking belt and reset the dis-
plays, hold down the STOP button for two seconds.
shows the speed of the
walking belt and your
current pace (pace is
measured in minutes
per mile). Every seven seconds, the display will
change from one number to the other; the indicator
will light when your pace is shown.
Adjust the incline of the treadmill as desired
4
To change the incline of the treadmill, press the
INCLINE buttons. Each time one of the buttons is
pressed, the incline will change by 0.5%. The but-
tons can be held down to change the incline quickly.
Note: It may take a few seconds for the treadmill to
reach the selected incline setting.
Note: The console can
display distance, speed
and pace in either miles
or kilometers. To see
which unit of measure-
ment is selected, hold
down the STOP button while inserting the key into
the console. An ÒE,Ó for english miles, or an ÒM,Ó for
metric kilometers, will appear in the CALS/FAT
CALS/PULSE display. If you want to change the
unit of measurement, press the SPEED
Remove and then reinsert the key.
▲
button.
7
9
Download from Www.Somanuals.com. All Manuals Search And Download.
CALS/FAT CALS/
PULSE displayÑThis
HOW TO USE THE WORKOUT PROGRAMS
display shows the ap-
proximate numbers of
calories and fat calories
you have burned (see
FAT BURNING on page 19). Every seven seconds,
the display will change from one number to the
other; the indicator will light when the number of fat
calories is shown. This display will also show your
heart rate when the pulse sensor is used (see
step 6).
The four incline programs automatically control the
incline of the treadmill as they guide you through effec-
tive workouts; the six speed programs automatically
control the speed of the treadmill. Follow the steps
below to use a workout program.
Insert the key into the console.
1
A moment after the key is inserted, the four displays,
the LED track, and various indicators will light.
Measure your heart rate, if desired.
Stand on the
6
Press the MODE button to select the desired
workout program.
2
foot rails and
place your
hands on the
metal contacts
on the handrail.
Your palms
Metal Contacts
When the key is inserted, the manual mode will be
selected, as shown by the manual indicator.
To select one of
the workout pro-
Program Indicators
grams, press the
mode button
must be resting
on the upper
repeatedly until
one of the four
incline program
indicators or one
of the six speed
program indicators lights.
contacts, and
your fingers must
be touching the
lower contactsÑ
avoid moving your hands. When your heart rate
is detected, the heart-shaped indicator in the
CALS/FAT CALS/PULSE display will flash
steadily and a ÒPÓ will appear. After a few sec-
onds, your heart rate will be shown. For the most
accurate heart rate reading, continue to hold
the contacts for about 15 seconds.
Note: The five AEROBIC programs are twenty
minutes long; the five FAT BURN programs are
thirty minutes long. The graphs on the sides of the
console show how the incline or speed of the
treadmill will change during the programs. During
the AEROBIC I programs, for example, the incline
or speed will gradually increase during the first ten
minutes and then gradually decrease during the
last ten minutes. Each program begins with a
warm-up period and ends with a cool-down period.
When you are finished exercising, press the
STOP button and remove the key.
7
Step onto the foot rails, press the STOP button and
remove the key from the console. Keep the key in
a secure place.
Set a maximum incline or speed setting.
3
In addition, move the on/off switch to the off posi-
tion and unplug the power cord.
If you selected an
incline program, a
number will flash in the
TIME/INCLINE display.
This number is the maxi-
mum incline that the
treadmill will reach during the selected program. If
you want to change the maximum incline setting,
press the INCLINE
▲
button. The maximum incline
setting can be from 4.5% to 10%. If the setting is
increased, the difficulty level of the entire program
will increase. If the setting is decreased, the difficulty
level of the entire program will decrease.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
If you selected a
speed program, a
number will flash in the
SPEED/PACE display.
This number is the max-
imum speed that the
If an incline program is selected, the speed of the
treadmill can be changed during the program with
the SPEED buttons. If a speed program is se-
lected, the incline of the treadmill can be changed
with the INCLINE buttons.
walking belt will reach during the selected program.
If you want to change the maximum speed setting,
The program will continue until the incline or
speed setting of the last period is shown in the
CURRENT PERIOD column of the LED matrix
and the TIME/INCLINE display counts down to
zero. The walking belt will then slow to a stop.
press the SPEED
▲
button. The maximum speed
setting can be from 4 mph to 10 mph. If the setting
is increased, the difficulty level of the entire pro-
gram will increase. If the setting is decreased, the
difficulty level of the entire program will decrease.
If the program is too easy or too difficult, the
intensity of the program can be adjusted. If an
incline program is selected, press the INCLINE
buttons to adjust the maximum incline setting; if
a speed program is selected, press the SPEED
buttons to adjust the maximum speed setting (see
step 3 on page 10).
Press the START button to start the program
4
A moment after the START button is pressed, the
walking belt will begin to move. (If an incline pro-
gram is selected, the treadmill will also adjust to
the first incline setting of the program, unless it is
already at the first setting.) Hold the handrails and
carefully begin walking.
To stop the program for a moment, press the
STOP button. The displays will pause and the
TIME/INCLINE display will begin to flash. To
restart the program, press the START button. To
end the program at any time, hold down the
STOP button for two seconds. The MANUAL
mode will then be selected.
Each program consists of twenty or thirty one-
minute periods. (The length of the program is
shown in the TIME/INCLINE display.) If an incline
program is selected, one incline setting is pro-
grammed for each period; if a speed program is
selected, one speed setting is programmed for
each period.
Follow your progress with the four displays.
See step 5 on page 9.
5
6
7
The incline or speed settings of the program you
have selected will be shown in the LED matrix.
The incline or speed
Measure your heart rate, if desired.
See step 6 on page 10.
setting of the first
CURRENT PERIOD
period will be shown
in the flashing
When the program is completed, remove the
key.
CURRENT PERIOD
column. The settings
of the next seven
periods will be shown
in the seven columns
to the right.
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. In
addition, move the on/off switch to the off position
and unplug the power cord.
When only three seconds remain in the first one-
minute period of the program, both the CURRENT
PERIOD column and the column to the right will
flash and three tones will sound. All incline or
speed settings will then move one column to the
left. The setting of the second period will then be
shown in the CURRENT PERIOD column and the
incline or speed of the treadmill will automatically
adjust to that setting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
adjust the speed and incline of the treadmill to the
desired levels with the SPEED and INCLINE but-
tons. Every few times the SPEED buttons are
pressed, one additional indicator will light or
darken in the CURRENT PERIOD column.
HOW TO CREATE CUSTOM PROGRAMS
The Custom 1 and Custom 2 programs are workout
programs that you create. The programs control both
the speed and the incline of the treadmill, and can be
up to 40 minutes long. The programs are stored in
memory and can be changed as many times as desired.
Follow the steps below to create a custom program.
When the first period is completed, three tones will
sound and the current speed and incline settings
will be stored in memory. All settings shown in the
LED matrix will then move one column to the left
and the speed setting of the second period will be
shown in the CURRENT PERIOD column. Program
speed and incline settings for the second period
as described above. Repeat this procedure until
you have programmed speed and incline settings
for as many periods as desired. Programs can
have up to forty periods.
Insert the key into the console.
1
A moment after the key is inserted, the four dis-
plays, the LED track and various indicators will light.
Press the MODE button to select a custom
workout program.
2
When the key is inserted, the manual mode will be
selected, as shown by the manual indicator.
Note: To stop the program for a moment, press the
STOP button. The displays will pause and the
TIME/INCLINE display will begin to flash. To
restart the program, press the START button.
To select a custom
program, press the
mode button
repeatedly until one
of the two custom
program indicators
lights.
Program
Indicator
When you are finished programming settings,
hold down the STOP button for two seconds.
5
6
When you have programmed speed and incline
settings for as many one-minute periods as
desired, hold down the STOP button for two sec-
onds. The speed and incline settings that you have
programmed and the length of the program will be
stored in memory. To use the program again, see
HOW TO USE CUSTOM PROGRAMS below.
Press the START button to start the program.
3
4
A moment after the START button is pressed, the
walking belt will begin to move. Hold the handrails
and carefully begin walking.
When the program is completed, remove the
key.
Press the LEARN button and program the
desired speed and incline settings.
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. In ad-
dition, move the on/off switch to the off position and
unplug the power cord.
When the LEARN
button is pressed, the
LEARN indictor will light.
Speed and incline set-
tings can be pro-
grammed only when
the indicator is lit.
HOW TO USE CUSTOM PROGRAMS
Insert the key into the console.
Each custom program is divided into one-minute
periods. One speed setting and one incline setting
can be programmed for each period. The speed
setting of the first
1
A moment after the key is inserted, the four dis-
plays, the LED track and various indicators will light.
period is shown in the
Press the MODE button to select a custom
workout program.
CURRENT PERIOD
flashing CURRENT
PERIOD column of
the LED matrix. (The
incline settings are not
shown in the matrix.)
To program speed
2
When the key is inserted, the manual mode will be
selected, as shown by the manual indicator.
and incline settings for
the first period, simply
12
Download from Www.Somanuals.com. All Manuals Search And Download.
To select a custom
program, press the
mode button
repeatedly until one
of the two custom
program indicators
lights.
To stop the program for a moment, press the
STOP button. The displays will pause and the
TIME/INCLINE display will begin to flash. To
restart the program, press the START button. To
end the program at any time, hold down the STOP
button for two seconds. The MANUAL mode will
then be selected.
Program
Indicator
Press the START button to start the program.
Follow your progress with the LED displays.
Refer to step 5 on page 9.
3
4
5
6
A moment after the button is pressed, the walking
belt will begin to move. Hold the handrails and
carefully begin walking.
Measure your heart rate, if desired.
See step 6 on page 10.
Each program is divided into one-minute periods.
One speed setting and one incline setting are
programmed for each
When the program is completed, remove the
key.
period. The speed
setting of the first
CURRENT PERIOD
period is shown in the
flashing CURRENT
PERIOD column of
the LED matrix. (The
incline settings are
not shown in the
matrix.)
Step onto the foot rails and remove the key from
the console. Keep the key in a secure place. In ad-
dition, move the on/off switch to the off position and
unplug the power cord.
THE INFORMATION MODE
When only three seconds remain in the first period,
both the CURRENT PERIOD column and the col-
umn to the right will flash and three tones will
sound. All speed settings will then move one col-
umn to the left. The speed setting of the second
period will then be shown in the CURRENT PE-
RIOD column and the speed and incline of the
treadmill will adjust to the second settings that you
programmed previously.
To access the information mode, hold down the STOP
button while inserting the key into the console.
The DISTANCE/LAPS
display will show the total
number of miles that the
walking belt has moved.
The TIME/INCLINE display
will show the total number of
hours that the treadmill has
been used.
The program will continue until the speed setting
of the last period is shown in the CURRENT PE-
RIOD column of the LED matrix and the TIME/IN-
CLINE display counts down to zero. The walking
belt will then slow to a stop.
An ÒE,Ó for english miles, or
an ÒM,Ó for metric kilometers,
will appear in the CALS/FAT
CALS/PULSE display. If you
want to change the unit of
measurement, press the
During the program, the speed and incline settings
of the current period can be adjusted with the
SPEED and INCLINE buttons. Adjustments will not
be stored in memory. To reprogram speed and in-
cline settings, press the LEARN button. The
LEARN indicator will light. Speed and incline set-
tings can be reprogrammed only when the indi-
cator is lit. Next, adjust the speed and incline of
the treadmill with the SPEED and INCLINE but-
tons. When the current period of the program is
completed, the new speed and incline settings will
be stored in memory. When you have repro-
grammed speed and incline settings for as many
periods as desired, press the LEARN button again.
SPEED
▲
button.
To exit the information mode, remove the key from the
console.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE HAND WEIGHTS
THE OPTIONAL CHEST PULSE SENSOR
The included hand
An optional chest pulse sensor adds even more
features to the console. The chest pulse sensor offers
hands-free operation and continuously monitors your
heart rate during your workouts. To purchase the
optional chest pulse sensor, please call toll-free at
1-800-291-0994.
weights let you add
upper body exercise
to your workouts. As
you walk on the tread-
mill, hold the 2-pound
weights at your sides
or press the weights
above your head. To
increase the intensity
of your exercise, use
the 3-pound weights.
WARNING: Do not
use the hand
weights at speeds
higher than a walk.
Using weights and
not holding the
handrails may compromise your ability to maintain
your balance. Exercises using weights should be
attempted only by experienced users.
Note: The hand pulse sensor and the chest pulse sen-
sor cannot be used simultaneously.
The hand weights
Weight Rack
can be stored in
the handy weight
rack on the con-
sole.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If this is not done, the treadmill may be
permanently damaged. Next, unplug the power cord. CAU-
TION: You must be able to safely lift 45 pounds (20 kg) in
order to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown at
the right. CAUTION: To decrease the possibility of injury,
bend your legs and keep your back straight. As you
raise the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Using your left hand, pull the latch knob to
the left and hold it. Raise the treadmill until the latch pin is
aligned with the hole in the catch. Insert the latch pin into
the catch. Make sure that the latch pin is fully inserted
into the catch.
Open
Closed
Latch
Knob
To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the storage
position in temperatures above 85¡ Fahrenheit.
Pin
Catch
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage
position as described above. Make sure that the latch pin is
fully inserted into the catch.
Book Holder
1. Hold the treadmill as shown and place one foot against a
wheel. Do not hold or push on the book holder or the
book holder may be damaged.
2. Tilt the treadmill back until it rolls freely on the front wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving the
treadmill. Do not attempt to move the treadmill over an
uneven surface.
Base
3. Place one foot on the base, and carefully lower the treadmill
until it is resting in the storage position.
Front Wheels
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO LOWER THE TREADMILL FOR USE
Open
1. Hold the upper end of the treadmill with your right hand as
shown. Using your left hand, pull the latch knob to the left
and hold it. Pivot the treadmill down until the frame is past
the pin. Slowly release the latch knob.
Closed
Latch
Knob
Pin
2. Hold the treadmill firmly with both hands, and lower the
treadmill to the floor. CAUTION: To decrease the possibil-
ity of injury, bend your legs and keep your back straight.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLE-SHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll-
free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is plugged into
a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page 7.) Use only a UL-listed
surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. After the power cord has been plugged in, make sure that the key is inserted into the console as far as it will
go. See step 1 on page 9.
c. Check the circuit breaker located on the treadmill near the
c
power cord. If the switch protrudes as shown, the circuit
breaker has tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
Tripped
Reset
d. Check the on/off switch located on the treadmill near the
power cord. The switch must be in the on position.
d
On
Position
2. SYMPTOM: THE POWER TURNS OFF DURING USE
a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. See step 1 on page 9.
d. Make sure that the on/off switch is in the on position.
e. If the treadmill still will not run, please call our Customer Service Department, toll-free.
3. SYMPTOM: THE PULSE SENSOR DOES NOT FUNCTION PROPERLY
a. Make sure to stand on the foot rails and avoid moving your hands while measuring your heart rate.
Excessive movement may interfere with heart rate readings. If the pulse sensor is not used correctly, your
heart rate will not be shown.
b. Do not hold the metal contacts too tightly; doing so may interfere with heart rate readings.
c. For the most accurate heart rate reading, hold the contacts for about 15 seconds.
d. For optimal performance of the pulse sensor, keep the contacts clean. The contacts can be cleaned with a
soft clothÑnever use alcohol, abrasives, or chemicals.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. SYMPTOM: THE DISPLAYS OF THE CONSOLE DO NOT FUNCTION PROPERLY
a. Remove the key from the console and UPLUG THE POWER
CORD. Remove the screws from the hood. Carefully remove the
1/8Ó
109
26
hood. Locate the Reed Switch (26) and the Magnet (107) on the
left side of the Pulley (12). Turn the Pulley until the Magnet is
aligned with the Reed Switch. Make sure that the gap between
the Magnet and the Reed Switch is about 1/8Ó. If necessary,
loosen the Reed Switch Screw (109) and move the Reed Switch
slightly. Retighten the Screw. Re-attach the hood, and run the
treadmill for a few minutes to check for a correct speed reading.
12
107
Top
View
5. SYMPTOM: The walking belt slows when walked on
a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length.
b. If the walking belt is overtightened, treadmill performance may
decrease and the walking belt may be permanently damaged.
b
Remove the key and UNPLUG THE POWER CORD. Using the
allen wrench, turn both rear roller adjustment bolts counterclock-
wise, 1/4 of a turn. When the walking belt is properly tightened,
you should be able to lift each side of the walking belt 3 to 4
inches off the walking platform. Be careful to keep the walking
belt centered. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is prop-
erly tightened.
3ÓÐ4Ó
Rear Roller Adjustment Bolts
c. If the walking belt still slows when walked on, please call our
Customer Service Department, toll-free.
6. SYMPTOM: The walking belt is off-center
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt clockwise, and the right bolt coun-
terclockwise, 1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is cen-
tered.
a
b. If the walking belt has shifted to the right, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench, turn
the left rear roller adjustment bolt counterclockwise, and the right
bolt clockwise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the walking belt is
centered.
b
7. SYMPTOM: The walking belt slips when walked on
a. If the walking belt slips when walked on, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn
both rear roller adjustment bolts clockwise, 1/4 of a turn. When
the walking belt is correctly tightened, you should be able to lift
each side of the walking belt 3 to 4 inches off the walking plat-
form. Be careful to keep the walking belt centered. Plug in the
power cord, insert the key and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is properly tightened.
a
18
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
uses easily accessible carbohydrate calories for en-
ergy. Only after the first few minutes does your body
begin to use stored fat calories for energy. If your goal is
to burn fat, adjust the speed and incline of the treadmill
until your heart rate is near the lowest number in your
training zone. It may also be helpful to use one of the
consoleÕs FAT BURN programs (see pages 10 and 11).
WARNING:
Before beginning this
or any exercise program, consult your physi-
cian. This is especially important for individu-
als over the age of 35 or individuals with pre-
existing health problems.
The pulse sensor is not a medical device.
Various factors, including your movement,
may affect the accuracy of heart rate readings.
The sensor is intended only as an exercise aid
in determining heart rate trends in general.
For maximum fat burning, adjust the speed and incline
of the treadmill until your heart rate is near the middle
number in your training zone.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the speed and incline of the treadmill until your
heart rate is near the highest number in your training
zone. It may also be helpful to use one of the consoleÕs
AEROBIC programs (see pages 10 and 11).
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines only. For more detailed exercise information, ob-
tain a reputable book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning and aerobic exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A Warm-upÑStart each workout with 5 to 10 minutes
of stretching and light exercise. A proper warm-up in-
creases your body temperature, heart rate and circula-
tion in preparation for exercise.
Training Zone ExerciseÑAfter warming up, increase
the intensity of your exercise until your pulse is in your
training zone for 20 to 60 minutes. (During the first few
weeks of your exercise program, do not keep your
pulse in your training zone for longer than 20 minutes.)
Breathe regularly and deeply as you exerciseÑnever
hold your breath.
To find the proper heart rate for you, first find your age
near the bottom of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
above your age. The three numbers define your Òtrain-
ing zone.Ó The lower two numbers are recommended
heart rates for fat burning; the higher number is the
recommended heart rate for aerobic exercise.
A Cool-downÑFinish each workout with 5 to 10 min-
utes of stretching to cool down. This will increase the
flexibility of your muscles and will help prevent post-ex-
ercise problems.
To measure your heart rate during exercise, use the
pulse sensor on the console. If your heart rate is too
high or too low, adjust the speed and incline of the
treadmill.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months, you may com-
plete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
Fat Burning
To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
1
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings,
back of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
2
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your
back foot flat on the floor. Bend your front leg, lean forward and
3
move your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches:
Calves, achilles tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and
grasp one foot with your other hand. Bring your heel as close
to your buttocks as possible. Hold for 15 counts, then relax.
Repeat 3 times for each leg. Stretches: Quadriceps and hip
muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold
for 15 counts, then relax. Repeat 3 times. Stretches:
5
Quadriceps and hip muscles.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LISTÑModel No. PFTL78580
R0399A
To identify parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual.
Key
No. Qty. Description
Key
No. Qty. Description
1
2
3
4
5
6
7
8
2
2
1
1
4
6
6
1
2
2
1
1
32
1
1
1
2
3
2
1
8
1
2
1
1
1
1
4
1
2
2
1
1
1
1
3
1
1
1
1
1
1
2
3
1
1
1
1
1
1
Center Track
Foot Rail
Left Foot Rail Cap
Front Roller Adjustment Nut
Isolator
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65*
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84**
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
1
4
1
1
1
1
1
1
2
1
1
1
26
1
1
1
2
1
0
4
1
2
1
2
7
2
2
1
1
2
1
1
1
1
1
2
2
2
5
1
2
1
1
1
1
1
1
1
4
1
Power Supply
Plastic Stand-off
Power Cord
Grommet
On/Off Switch
Circuit Breaker
Outlet Bracket
Book Rack
Bumper
Platform Screw
Walking Platform
Frame Pivot Bolt
Frame Pivot Spacer
Walking Belt
Front Roller/Pulley
Small Screw
Motor Belt
9
Belt Guide
Shock
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45*
46
47
48
49
50
Front Belly Pan
Right Foot Rail Cap
Belly Pan Fastener
Console Base
Weight Kit
Frame Guide
Rear Isolator
Belly Pan
Not Used
Hood Screw
Key/Clip
Rear Endcap Bracket
Rear Endcap
Rear Foot
Base
Incline Frame
Hood Bracket (long)
Bracket Clip
Handrail Endcap
Console Plate
Nut
Lift Motor Shield
Incline Motor Bolt
Allen Wrench
Incline Motor
Reed Switch
Upright Plug
Incline Cover Screw/Foot Screw
Rear Roller Adj. Bolt
Caution Decal
Latch Decal
Foot Rail Cap Screw
Adhesive Clip
Wheel Bolt
Frame
Rear Deck Screw
Console
Latch Catch
Rear Roller
Optional Chest Pulse
Cable Tie
Cable Tie Screw
Cable Tie Clamp
8Ó Cable Tie
Front Wheel
Hood Bracket (short)
Motor Pivot Nut
Pulley/Flywheel/Fan
Motor
Motor Tension Bolt
Motor Tension Washer
Star Washer
Motor Tension Nut
Motor Pivot Bolt
Motor Hood
Incline Motor Shield
Incline Pivot Washer
Adj. Washer
Motor/Pulley/Fly./Fan
Front Roller Adj. Bolt
Choke
Electronics Bracket
Controller
Electronics Shield
4Ó Cable Tie
Upright Wire Harness
Handrail Grip
Lock Knob
Lock Knob Sleeve
Spring
Lock Pin Collar
Pin Clip
Lock Pin
8Ó Wire Harness
Pulse Sensor Plate
Ground Wire
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Key
No. Qty. Description
Key
No. Qty. Description
101* 1
102 28
Pulse Bar
Screw
120
121
#
#
#
#
#
#
#
7
8
1
1
1
1
1
1
1
1
1
1
Belly Pan Screw
Electronics Screw
14Ó White Wire, 2 F
8Ó White Wire, M/F
4Ó White Wire, M/F
4Ó Black Wire, 2 F
4Ó Black Wire, M/Ring
9Ó Black Wire, M/F
8Ó Blue Wire, 2 F
8Ó Red Wire, M/F
8Ó Green Wire, F/Ring
User's Manual
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
2
2
4
1
1
1
1
1
2
2
2
1
1
1
1
1
1
Pulse Bar Washer
Pulse Bar Bolt
Upright Endcap
Upright Grommet
Magnet
Incline Reed Switch
Reed Switch Screw
Reed Switch Clip
Roller Guard
#
#
#
2-lb Weight
3-lb Weight
Incline Optic Disk
Optic Switch Nut
Optic Switch Washer
Optic Switch Bolt
Optic Switch
# These parts are not illustrated
* Includes all parts shown in the box
** For more information about the optional pulse kit,
see page 14.
Incline Motor Spacer
Specifications are subject to change without notice. For information about ordering replacement parts, see the
back cover of this manual.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:
¥ The MODEL NUMBER OF THE PRODUCT (PFTL78580).
¥ The NAME OF THE PRODUCT (PROFORM¨ 785EX treadmill).
¥ The SERIAL NUMBER OF THE PRODUCT (see the front cover of this manual).
¥ The KEY NUMBER AND DESCRIPTION OF THE PART(S) (see the PART LIST on pages 22 and 23 and the
EXPLODED DRAWING attached to the center of this manual).
If possible, place the treadmill near your telephone for easy reference when calling.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service
centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of pur-
chase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center, to products used for commercial or
rental purposes, or to products used as store display models. No other warranty beyond that specifically
set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in-
cidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 149575 H03960-C R0399A
Printed in USA © 1999 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|