ProForm Home Gym PFSY74490 User Manual

®
Model No. PFSY74490  
Serial No.  
USER’S MANUAL  
The serial number is found in the  
location shown below. Write the  
serial number in the space above.  
Serial  
Number  
Decal  
QUESTIONS?  
As a manufacturer, we are com-  
mitted to providing complete  
customer satisfaction. If you  
have questions or if there are  
missing parts, we will guarantee  
complete satisfaction through  
direct assistance from our factory.  
TO AVOID UNNECESSARY  
DELAYS, PLEASE CALL DIRECT  
TO OUR TOLL-FREE CUSTOMER  
HOT LINE. The trained techni-  
cians on our customer hot line  
will provide immediate assis-  
tance, free of charge to you.  
CUSTOMER HOT LINE:  
1-800-999-3756  
Mon.–Fri., 6 a.m.–6 p.m. MST  
CAUTION  
Visit our website at  
Read all precautions and instruc-  
tions in this manual before using  
this equipment. Save this manu-  
al for future reference.  
new products, prizes,  
fitness tips, and much more!  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before You Begin  
Thank you for selecting the versatile PROFORM®  
920Ci weight system. The 920Ci offers a wide selec-  
tion of weight stations designed to develop every  
major muscle group of the body. Whether your goal is  
to tone your body, build dramatic muscle size and  
strength, or improve your cardiovascular system, the  
PROFORM® 920Ci will help you to achieve the results  
you want.  
tions, please call our Customer Service Department  
toll-free at 1-800-999-3756, Monday through Friday, 6  
a.m. until 6 p.m. Mountain Time (excluding holidays).  
To help us assist you, please note the product model  
number and serial number before calling. The model  
number is PFSY74490. The serial number can be  
found on a decal attached to the weight system (see  
the front cover of this manual).  
For your benefit, read this manual carefully before  
Before reading further, please familiarize yourself with  
using the weight system. If you have additional ques- the parts that are labeled in the drawing below.  
Lat Bar  
High Pulley  
Station  
Butterfly  
Arms  
Shroud  
Ab Pulley  
Station  
WARNING  
DECAL  
WARNING  
DECAL  
Backrest  
Press Arms  
Curl Pad  
Seat  
Press Plate  
Weight Stack  
ASSEMBLED  
DIMENSIONS:  
Height: 75 in.  
Width: 78 in.  
Depth: 58.5 in.  
Low Pulley Station  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
Make sure you have the following tools:  
• Two adjustable wrenches  
Make Assembly Easier for Yourself!  
Everything in this manual is designed to  
ensure that the weight system can be assem-  
bled successfully by anyone. Before begin-  
ning assembly, make sure to read the  
information on this page; this brief intro-  
duction will save you much more time than  
it takes to read it!  
• One standard screwdriver  
• One phillips screwdriver  
• One rubber mallet  
You will also need grease or petroleum jelly, a  
small amount of soapy water, and clear tape or  
masking tape.  
Assembly Requires Two Persons  
Note: Assembly will be more convenient if you have  
a socket set, a set of open-end or closed-end  
wrenches, or a set of ratchet wrenches.  
For your convenience and safety, assemble the  
weight system with the help of another person.  
Set Aside Enough Time  
How to Identify Parts  
Due to the many features of the weight system, the  
assembly process will require a few hours. By set-  
ting aside plenty of time and by deciding to make  
the task enjoyable, assembly will go smoothly. You  
may want to assemble the weight system over a  
couple of evenings.  
To help you identify the small parts used in assembly,  
we have included a PART IDENTIFICATION CHART  
in the center of this manual. Place the chart on the  
floor and use it to easily identify parts during each  
assembly step. Note: Some small parts may have  
been pre-attached. If a part is not in the parts  
bag, check to see if it has been pre-attached.  
Select a Location for the Weight System  
Because of its weight and size, the weight system  
should be assembled in the location where it will be  
used. Make sure that there is enough room to walk  
around the weight system as you assemble it.  
How to Orient Parts  
As you assemble the weight system, make sure that  
all parts are oriented exactly as shown in the draw-  
ings.  
How to Unpack the Box  
Tightening Parts  
To make assembly as easy as possible, we have  
divided the assembly process into four stages. The  
parts needed for each stage are found in individual  
bags. Important: Wait until you begin each stage  
to open the parts bag for that stage. Place all  
parts of the weight system in a cleared area and  
remove the packing materials. Do not dispose of  
the packing materials until assembly is completed.  
Tighten all parts as you assemble them, unless  
instructed to do otherwise.  
Questions?  
If you have questions after reading the assembly  
instructions, please call our Customer Service  
Department toll-free at 1-800-999-3756 Monday  
through Friday, 6 a.m. until 6 p.m. Mountain Time.  
Frame Assembly  
Cable Assembly  
You will begin by assembling the base and the  
upright frames that serve as the skeleton of the  
equipment.  
During this stage you will attach the cables and  
pulleys that connect the moving arms with each  
other and with the weights.  
Seat Assembly  
Arm Assembly  
Next you will assemble the press and butterfly  
arms that you operate while you are exercising.  
During this stage you will assemble the seats and  
backrests.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Frame Assembly  
28  
28  
1. Before beginning, make sure that you have read  
and understood the information on page 4.  
28  
4
85  
Open the parts bag labeled “FRAME ASSEMBLY.”  
92  
5
Press a 2” Square Inner Cap (28) into each end of  
the Butterfly Base (4) and into the indicated locations  
on the Weight Base (5).  
92  
28  
Insert four 5/16” x 2 1/2” Carriage Bolts (92) and a  
3/8” x 3 3/4” Carriage Bolt (85) into the indicated  
holes in the Butterfly Base (4). Place the Butterfly  
Base flat on the floor. Note: If the Bolts fall out,  
secure them by putting a piece of tape over the  
head of each Bolt.  
2
3
4
89  
2. Attach the Weight Base (5) to the Butterfly Base (4)  
with two 5/16” x 2 3/4” Bolts (89), a Support Plate  
(94), and two 5/16” Nylon Locknuts (64).  
94  
64  
64  
4
5
3. Press a 2” Square Inner Cap (28) into each end of  
the Press Base (6). Turn the Press Base so the indi-  
cated welded tube is near the top.  
28  
Insert four 5/16” x 2 1/2” Carriage Bolts (92) and a  
3/8” x 4” Carriage Bolt (104) into the indicated holes  
in the Press Base (6). Note: The 3/8” x 4” Carriage  
Bolt will be tipped at an angle.  
6
Welded  
Tube  
104  
28  
92  
92  
4. Attach the Press Base (6) to the Weight Base (5) with  
two 5/16” x 2 3/4” Bolts (89), a Support Plate (94),  
and two 5/16” Nylon Locknuts (64).  
64  
5
94  
64  
6
89  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Place the bracket on the lower end of the Press  
Upright (2) over the indicated 5/16” x 2 1/2” Carriage  
Bolts (92) in the Press Base (6). Hand tighten two  
5/16” Nylon Locknuts (64) onto the Bolts. Do not  
tighten the Nylon Locknuts yet.  
5
2
64  
92  
6
6. Place the bracket on the lower end of the Butterfly  
Upright (1) over the indicated 5/16” x 2 1/2” Carriage  
Bolts (92) in the Butterfly Base (4). Hand tighten two  
5/16” Nylon Locknuts (64) onto the Bolts. Do not  
tighten the Nylon Locknuts yet.  
6
1
64  
4
92  
7. Place two Weight Bumpers (51) over the indicated  
holes in the Weight Base (5). Slide a Weight Guide  
(15) into each of the holes.  
7
16  
Groove  
Pin  
Attach the indicated Weight Guide (15) to the Weight  
Base (5) with a 3/8” x 2 3/4” Bolt (46), two 3/8” Flat  
Washers (48), and a 3/8” Nylon Locknut (50).  
17  
18  
Slide six Weights (21) onto the Weight Guides (15).  
Make sure the Weights are turned so the pin  
grooves are on the bottom.  
15  
Pin  
Grooves  
Identify the Short Weight Tube (17), which has six  
holes in it. Press a Weight Tube Bumper (18) into the  
lower end of the Short Weight Tube. Slide the Weight  
Tube into the Weights (21).  
21  
Slide a Top Weight (16) onto the Weight Guides (15).  
Make sure the Top Weight is turned so the groove  
fits over the pin on the Short Weight Tube (17).  
51  
50  
48  
5
46  
48  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Place two Weight Bumpers (51) over the indicated  
holes in the Weight Base (5). Slide a Weight Guide  
(15) into each of the holes.  
8
16  
Attach the indicated Weight Guide (15) to the Weight  
Base (5) with a 3/8” x 2 3/4” Bolt (46), two 3/8” Flat  
Washers (48), and a 3/8” Nylon Locknut (50).  
Groove  
Pin  
96  
15  
18  
Slide twelve Weights (21) onto the Weight Guides  
(15). Make sure the Weights are turned so the pin  
grooves are on the bottom.  
Pin  
Groove  
Identify the Long Weight Tube (96), which has twelve  
holes in it. Press a Weight Tube Bumper (18) into the  
lower end of the Long Weight Tube. Slide the Weight  
Tube into the Weights (21).  
21  
Slide a Top Weight (16) onto the Weight Guides (15).  
Make sure the Top Weight is turned so the groove  
fits over the pin on the Long Weight Tube (96).  
51  
50  
48  
5
46  
48  
9. Place the Weight Top Frame (66) on the indicated  
brackets on the Uprights (1, 2). Note: When attach-  
ing the Weight Top Frame make sure that the tops  
of both Weight Guides (15) are in back of the Top  
Frame, as shown in step 10.  
9
46  
26  
66  
46  
26  
Attach the Weight Top Frame (66) to each Upright (1,  
2) with two 3/8” x 2 3/4” Bolts (46), a Small Support  
Plate (26), and two 3/8” Nylon Locknuts (50).  
50  
15  
1
Tighten all of the Nylon Locknuts (64) used in  
steps 5 and 6.  
50  
Bracket  
89  
2
10. Press three 2” Square Inner Caps (28) into the  
Butterfly Top Frame (33).  
10  
94  
Attach the Butterfly Top Frame (33) to the brackets on  
the Butterfly Upright (1) and the Weight Top Frame  
(66) with four 5/16” x 2 3/4” Bolts (89), two Support  
Plates (94), and four 5/16” Nylon Locknuts (64).  
89  
28  
28  
64  
94  
66  
33  
28  
64  
1
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
11. Press a 2” Square Inner Cap (28) into each end of  
the Press Top Frame (9).  
11  
64  
89  
Attach the Press Top Frame (9) to the bracket on the  
Press Upright (2) and the Weight Top Frame (66) with  
four 5/16” x 2 3/4” Bolts (89), two Support Plates (94),  
and four 5/16” Nylon Locknuts (64).  
66  
28  
89  
94  
2
64  
94  
9
28  
12. Attach the Weight Guides (15) to the Weight Top  
Frame (66) with four 3/8” x 3 3/4” Bolts (59), four 3/8”  
Flat Washers (48), and four 3/8” Nylon Locknuts (50).  
Do not overtighten the Nylon Locknuts.  
12  
50  
48  
66  
48  
50  
59  
1
59  
2
15  
13. Attach the Butterfly Seat Frame (14) to the Butterfly  
Upright (1) with two 5/16” x 2 3/4” Bolts (89), two  
5/16” Washers (36), and two 5/16” Nylon Locknuts  
(64). Do not tighten the Nylon Locknuts yet.  
13  
1
89  
14  
36  
64  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
14. Press a 2” Square Inner Cap (28) into the Butterfly  
Front Leg (3). Slide the Butterfly Front Leg onto the  
indicated 5/16” x 2 1/2” Carriage Bolts (92) in the  
Butterfly Base (4). Hand tighten two 5/16” Nylon  
Locknuts (64) onto the Bolts. Do not tighten the  
Nylon Locknuts yet.  
14  
28  
14  
64  
36  
89  
Attach the Butterfly Front Leg (3) to the Butterfly Seat  
Frame (14) with two 5/16” x 2 3/4” Bolts (89), two  
5/16” Washers (36), and two 5/16” Nylon Locknuts  
(64). Tighten all of the Nylon Locknuts used in  
steps 13 and 14.  
3
64  
64  
4
92  
15. Press a 2” Square Inner Cap (28) into the Press Seat  
Frame (7).  
15  
36  
89  
7
64  
36  
Slide the Press Seat Frame (7) onto the indicated  
5/16” x 2 1/2” Carriage Bolts (92) in the Press Base  
(6). Hand tighten two 5/16” Nylon Locknuts (64) onto  
the Bolts. Do not tighten the Nylon Locknuts yet.  
2
28  
89  
Attach the Press Seat Frame (7) to the Press Upright  
(2) with two 5/16” x 2 3/4” Bolts (89), two 5/16”  
Washers (36), and two 5/16” Nylon Locknuts (64).  
64  
6
Tighten all of the Nylon Locknuts (64) used in this  
step.  
92  
16. Press two 2” Square Inner Caps (28) into the ends of  
the Leg Lever (41). Attach the Bumper (40) to the  
Butterfly Front Leg (3) with a 1” Tap Screw (80).  
16  
28  
63  
Lubricate the 3/8” x 3 1/4” Bolt (62). Attach the Leg  
Lever (41) to the Butterfly Front Leg (3) with the Bolt  
and a 3/8” Nylon Jam Nut (63). Do not overtighten  
the Nylon Jam Nut; the Leg Lever must pivot  
freely.  
41  
62  
3
80  
40  
28  
17. Press a 2” x 3” Inner Cap (98) into the indicated end  
of the Press Front Leg (20).  
17  
98  
Orient the Press Front Leg (20) with the welded rod in  
the position shown. Attach the Press Front Leg to the  
Press Base (6) with a 1/2” x 3 1/2” Bolt (105) and a  
1/2” Nylon Jam Nut (106). Do not overtighten the  
Nylon Jam Nut; the Press Front Leg must pivot  
freely.  
Welded  
Rod  
20  
6
106  
105  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
19  
20  
Arm Assembly  
18. Open the parts bag labeled “ARM ASSEMBLY.”  
50  
Press a Plastic Bushing (100) onto each welded tube  
on the Press Frame (8).  
8
Lubricate the 3/8” x 9” Bolt (52). Attach the Press  
Frame (8) to the welded tubes on the Press Base (6)  
with the Bolt and a 3/8” Nylon Locknut (50). Do not  
overtighten the Nylon Locknut; the Press Frame  
must pivot easily.  
52  
100  
6
19. Press a 2” Square Inner Cap (28) into the top of a  
Press Arm (77). Press a 1” Inner Cap (76) into the  
indicated hole in the Press Arm.  
28  
Attach the Press Arm (77) to the bracket on the Press  
Frame (8) with two 5/16” x 2 3/4” Bolts (89) and two  
5/16” Nylon Locknuts (64).  
76  
77  
64  
Repeat this step to assemble the other Press Arm  
(77, not shown).  
8
89  
20. Press a 2” Square Inner Cap (28) into each end of  
the Right Butterfly Arm (11). Wet the lower end of the  
Arm with soapy water and slide a Butterfly Foam Pad  
(29) onto it.  
33  
Lubricate the indicated axle on the Butterfly Top  
Frame (33). Orient the Right Butterfly Arm (11) as  
shown and slide it onto the axle. Secure the Butterfly  
Arm with two Retainer Rings (31) and a 1” Round  
Outer Cap (38). Note: Place the Retainer Rings on  
top of the inverted Outer Cap and gently tap the  
Cap onto the axle with a hammer. Make sure the  
teeth on the Retainer Rings bend towards the Cap  
as shown in the inset drawing.  
Lubricate  
28  
31  
11  
38  
28  
29  
Repeat this step to assemble the Left Butterfly Arm  
(10, not shown).  
Axle  
31  
Teeth  
38  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
22  
23  
24  
Cable Assembly  
84  
Bracket  
21.  
63  
Correct cable routing is critical. Make sure  
you wrap the cables around the pulleys  
exactly as shown in each step. For cable  
identification and routing during steps 21 to  
52, refer to the Cable Diagram and Cable ID  
Chart on pages 22 and 23.  
73  
10  
Open the parts bag labeled “CABLE ASSEMBLY  
AND PULLEYS.”  
Identify the Butterfly Cable (73); it is the shortest  
cable and has a loop on each end. Attach one end of  
the Butterfly Cable to the bracket on the Left Butterfly  
Arm (10) with a 3/8” x 1” Bolt (84) and two 3/8” Nylon  
Jam Nuts (63). Note: Do not overtighten the bot-  
tom Nylon Jam Nut; the Cable must pivot freely  
on the Bolt.  
27  
32  
53  
50  
22. Wrap the Butterfly Cable (73) around a “V”-Pulley  
(27) in the direction shown. Attach the “V”-Pulley and  
a Large Cable Trap (32) to the bracket on the back of  
the Butterfly Upright (1) with a 3/8” x 2 1/2” Bolt (53)  
and a 3/8” Nylon Locknut (50). Make sure that the  
Large Cable Trap is oriented as shown.  
73  
Bracket  
1
23. Remove both 3 1/2” Pulleys (24) and the Cable Traps  
(25) from one set of pre-assembled Pulley Plates (23).  
Wrap the Butterfly Cable (73) around a 3 1/2” Pulley  
(24) in the direction shown. Attach the Pulley and the  
Cable Trap (25) to the top hole in the Pulley Plates  
(23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon  
Locknut (50). Make sure the Cable Trap and is ori-  
ented as shown in the drawing.  
73  
25  
50  
24  
23  
54  
24. Wrap the Butterfly Cable (73) around a “V”-Pulley  
(27) in the direction shown. Attach the “V”-Pulley and  
a Large Cable Trap (32) to the welded bracket (see  
the inset drawing) on the back of the Butterfly Upright  
(1) with a 3/8” x 2 1/2” Bolt (53) and a 3/8” Nylon  
Locknut (50). Make sure that the Large Cable Trap  
is oriented as shown.  
32  
53  
Bracket  
50  
Bracket  
73  
27  
1
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25. Attach the Butterfly Cable (73) to the bracket on the  
Right Butterfly Arm (11) with a 3/8” x 1” Bolt (84) and  
two 3/8” Nylon Jam Nuts (63). Note: Do not over-  
tighten the bottom Nylon Jam Nut; the Cable  
must pivot freely on the Bolt.  
25  
26  
27  
84  
11  
63  
73  
26. Identify the Ab Cable (74). It is the second longest  
cable and has a ball on one end and a bolt on the  
other.  
Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in  
the direction shown. Place two Pulley Covers (47)  
over the Pulley, so that the large tabs are in the posi-  
tion shown. Attach the Pulley and Pulley Covers to  
the Butterfly Upright (1) with a 3/8” x 3 3/4” Bolt (59),  
two 3/8” Flat Washers (48), and a 3/8” Nylon Jam Nut  
(63). Make sure the Cable is between the Pulley  
and the welded pin on the Upright.  
63  
48  
47  
Large Tabs  
48  
24  
74  
47  
59  
Welded Pin  
1
27. Remove both 3 1/2” Pulleys (24) from the second set  
of pre-assembled Pulley Plates (23).  
Pulley  
Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in  
the direction shown. Attach the Pulley and a Cable  
Trap (25) to the top hole in the two Pulley Plates (23)  
with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut  
(50). Make sure the Cable Trap is oriented as  
shown.  
74  
24  
25  
54  
50  
1
23  
28. Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in  
the direction shown. Attach the Pulley and a Cable  
Trap (25) to the bottom hole in the first set of Pulley  
Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon  
Locknut (50). Make sure that the Pulley Bracket  
and Cable Trap are oriented exactly as shown.  
28  
1
23  
50  
25  
74  
23  
54  
24  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29. Wrap the Ab Cable (74) around a 3 1/2” Pulley (24)  
as shown. Attach the Pulley and a Cable Trap (25) to  
the welded bracket on the Butterfly Base (4) with a  
3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).  
29  
30  
31  
32  
74  
25  
24  
54  
50  
Welded  
Bracke  
4
30. Wrap the Ab Cable (74) around a 3 1/2” Pulley (24) in  
the direction shown. Secure the Pulley and a Cable  
Trap (25) to the 3/8” x 3 3/4” Carriage Bolt (85) in the  
Butterfly Base (4) with a 3/8” Nylon Jam Nut (63).  
Make sure the Cable Trap is oriented as shown.  
74  
63  
24  
85  
25  
4
31. Wrap the Ab Cable (74) around a 3 1/2” Pulley (24).  
Attach the Pulley to the bracket on the Weight Base  
(5) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon  
Locknut (50).  
24  
57  
74  
5
50  
Bracket  
32. Wrap the Ab Cable (74) around a 4 1/2” Pulley (102)  
in the direction shown. Attach the Pulley inside the  
indicated bracket on the Weight Top Frame (66) with  
a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).  
102  
50  
Bracket  
54  
66  
74  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33. Attach the bolt at the end of the Ab Cable (74) to a  
“U”-Bracket (97) with a 1/4” Flat Washer (71) and a  
1/4” Nylon Locknut (68). Note: Do not completely  
tighten the Nylon Locknut; it should be threaded  
only two turns onto the bolt, as shown in the  
inset drawing.  
33  
64  
97  
71  
68  
74  
60  
17  
74  
71  
Attach the “U”-Bracket (97) to the hole in the Short  
Weight Tube (17) with a 5/16” x 1 3/4” Bolt (60) and a  
5/16” Nylon Locknut (64).  
68  
97  
34. Identify the Low Cable (75). It has a ball on one end  
and a loop on the other. Route the end with the loop  
through the slot in the cable guide on the Butterfly  
Base (4).  
34  
35  
36  
Bracket  
54  
Route the Low Cable (75) under a 3 1/2” Pulley (24).  
Attach the Pulley and a Cable Trap (25) to the brack-  
et on the Butterfly Base (4) with a 3/8” x 2” Bolt (54)  
and a 3/8” Nylon Locknut (50). Make sure the Cable  
Trap is oriented as shown.  
25  
4
75  
24  
50  
Cable Guide  
35. Wrap the Low Cable (75) around a 3 1/2” Pulley (24).  
1
75  
Attach two 3 1/2” Pulleys (24) and two Cable Traps  
(25) to the Butterfly Upright (1) with a 3/8” x 5” Bolt  
(108) and a hand tightened 3/8” Nylon Locknut (50)  
as shown. Do not tighten the Nylon Locknut  
before step 37.  
25  
50  
24  
25  
108  
24  
36. Wrap the Low Cable (75) over a 3 1/2” Pulley (24) as  
shown. Attach the Pulley and a Cable Trap (25) to the  
lower hole in the second set of Pulley Plates (23) with  
a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).  
Make sure the Cable Trap is oriented as shown.  
23  
24  
50  
75  
25  
54  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37. Remove the indicated 3/8” Nylon Locknut (50) and  
3 1/2” Pulley (24). Wrap the Low Cable (75) around  
the Pulley in the direction shown. Reattach the Pulley  
and tighten the Nylon Locknut. Make sure the Cable  
is routed exactly as shown and that the Cable  
Trap (25) is oriented to hold the Cable in place.  
37  
38  
39  
40  
75  
50  
25  
24  
38. Attach the end of the Low Cable (75) to the indicated  
hole in the Leg Lever (41) with a 3/8” x 2 3/4” Bolt  
(46), two 3/8” Flat Washers (48), and a 3/8” Nylon  
Locknut (50). Do not overtighten the Nylon  
41  
75  
46  
LockNut; the Cable must pivot freely on the Bolt.  
48  
50  
48  
39. Identify the High Cable (72). It is longest cable, and  
has a ball on one end and a bolt on the other.  
24  
Wrap the High Cable (72) over a 3 1/2” Pulley (24).  
Attach the Pulley to the Press Top Frame (9) with a  
3/8” x 3 1/2” Bolt (56), a 3/8” Flat Washer (48), and a  
3/8” Nylon Jam Nut (63).  
56  
9
48  
63  
72  
40. Wrap the High Cable (72) around a 3 1/2” Pulley (24).  
Attach the Pulley and a Cable Trap (25) to the Press  
Upright (2) with a 3/8” x 3 3/4” Bolt (59), a 3/8” Flat  
Washer (48), and a 3/8” Nylon Jam Nut (63).  
72  
63  
25  
48  
24  
59  
2
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41. Wrap the High Cable (72) around a 3 1/2” Pulley (24).  
Attach the Pulley and a Cable Trap (25) to the indicat-  
ed hole in the Press Upright (2) with a 3/8” x 3 3/4”  
Bolt (59), a 3/8” Flat Washer (48), and a 3/8” Nylon  
Jam Nut (63). Make sure the Cable Trap is oriented  
as shown.  
41  
42  
43  
59  
24  
25  
2
48  
72  
63  
42. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley and a Cable  
Trap (25) to the indicated hole in the Press Front Leg  
(20) with a 3/8” x 3 3/4” Bolt (59), a 3/8” Flat Washer  
(48), and a 3/8” Nylon Jam Nut (63).  
72  
59  
48  
24  
20  
63  
25  
43. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley and a Cable  
Trap (25) to the indicated hole on the Press Seat  
Frame (7) with a 3/8” x 3 3/4” Bolt (59), a 3/8” Flat  
Washer (48) and a 3/8” Nylon Jam Nut (63). See the  
inset drawing. Make sure the Cable is routed  
exactly as shown.  
24  
25  
59  
48  
63  
72  
7
24  
44. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley and a Cable  
Trap (25) to the Press Front Leg (20) with a 3/8” x 3  
3/4” Bolt (59), a 3/8” Flat Washer (48) and a 3/8”  
Nylon Jam Nut (63). See the inset drawing. Make  
sure the Cable is routed exactly as shown.  
44  
72  
59  
48  
63  
24  
25  
20  
24  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45. Route the High Cable (72) through the opening in the  
Press Frame (8). Wrap the High Cable around a 3  
1/2” Pulley (24). Attach the Pulley and a Cable Trap  
(25) to the lower hole in the Press Upright (2) with a  
3/8” x 3 3/4” Bolt (59), a 3/8” Flat Washer (48), and a  
3/8” Nylon Jam Nut (63). Make sure that the Cable  
Trap is oriented as shown.  
45  
46  
47  
24  
72  
59  
2
25  
63  
48  
8
46. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
as shown. Attach the Pulley and a Cable Trap (25) to  
the indicated hole in the Press Frame (8) with a 3/8” x  
3 1/2” Bolt (56), a 3/8” Flat Washer (48), and a 3/8”  
Nylon Locknut (50). Make sure the Pulley is mount-  
ed on the inside of the Press Frame and that the  
Cable Trap is oriented as shown.  
56  
25  
48  
24  
8
50  
72  
47. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley and a Cable  
Trap (25) to the second hole in the bracket on the  
Press Upright (2) with a 3/8” x 2” Bolt (54) and a 3/8”  
Nylon Locknut (50). Make sure that the Cable Trap  
is oriented as shown.  
2
Second  
Hole  
54  
24  
72  
Bracket  
25  
50  
48. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley and a Cable  
Trap (25) to the indicated hole in the Press Frame (8)  
with a 3/8” x 3 1/2” Bolt (56), a 3/8” Flat Washer (48),  
and a 3/8” Nylon Locknut (50). Make sure that the  
Cable Trap is oriented as shown.  
48  
50  
56  
8
48  
24  
25  
72  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
as shown. Attach the Pulley, a Cable Trap (25), and  
an Angle Spacer (103) to the 3/8” x 4” Carriage Bolt  
(104) in the Press Base (6). Make sure the Angle  
Spacer is angled exactly as shown. Secure the  
Pulley with a 3/8” Nylon Jam Nut (63). Make sure the  
Cable Trap is oriented as shown.  
49  
63  
24  
25  
72  
103  
6
50. Wrap the High Cable (72) around a 3 1/2” Pulley (24)  
in the direction shown. Attach the Pulley inside the  
indicated bracket on the Weight Base (5) with a 3/8”  
x 1 3/4” Bolt (57) and a 3/8” Nylon Locknut (50).  
Make sure that the Cable Trap is oriented as  
shown.  
50  
24  
Bracket  
50  
57  
72  
5
51. Wrap the High Cable (72) over a 4 1/2” Pulley (102)  
in the direction shown. Attach the Pulley inside the  
indicated bracket on the Weight Top Frame (66) with  
a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50).  
51  
66  
102  
50  
Bracket  
54  
72  
52. Attach the bolt at the end of the High Cable (72) to  
the remaining “U”-Bracket (97) with a 1/4” Flat  
Washer (71) and a 1/4” Nylon Locknut (68). Note: Do  
not completely tighten the Nylon Locknut; it  
should be threaded only two turns onto the end  
of the Cable, as shown in the inset drawing.  
52  
72  
97  
60  
64  
72  
71  
71  
68  
96  
Attach the “U”-Bracket (97) to the hole in the Long  
Weight Tube (96) with a 5/16” x 1 3/4” Bolt (60) and a  
5/16” Nylon Locknut (64).  
Follow all four cables from end to end. Make sure  
that they rest in the grooves of the pulleys and  
that the cables and the pulleys move smoothly.  
68  
97  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
Seat Assembly  
53. Open the parts bag labeled “SEAT ASSEMBLY.”  
83  
71  
Press a 1” x 2” Inner Cap (83) into each end of a  
Backrest Adjustment Frame (70). Press a 1 1/4”  
Square Inner Cap (35) into the indicated tube on the  
Backrest Adjustment Frame.  
78  
70  
35  
12  
Identify the Butterfly Backrest (12); it has only two  
holes in the back. Attach the Butterfly Backrest to the  
Backrest Adjustment Frame (70) with two 1/4” x 1 1/2”  
Bolts (82) and two 1/4” Flat Washers (71).  
82  
1
83  
71  
Pull the indicated Adjustment Knob (78) and slide the  
tube on the Backrest Adjustment Frame (70) into the  
Butterfly Upright (1). Release the Adjustment Knob  
and snap it into one of the holes in the Backrest  
Adjustment Frame. Secure it by turning the Knob  
clockwise.  
54. Press a 1” x 2” Inner Cap (83) into each end of the  
Seat Adjustment Frame (90). Press a 1 1/4” Square  
Inner Cap (35) into the tube on the Seat Adjustment  
Frame.  
54  
101  
Insert a 1/4” x 1 1/2” Carriage Bolt (101) into the cen-  
ter hole in a Seat Plate (65). Attach the Seat Plate to a  
Seat (13) with two 1/4” x 3/4” Bolts (49). Insert the 1/4”  
x 1 1/2” Carriage Bolt into the indicated hole in the  
Seat Adjustment Frame (90) and secure it with a 1/4”  
Flat Washer (71) and a 1/4” Nylon Locknut (68).  
13  
65  
49  
83  
71  
90  
83  
68  
78  
71  
Secure the other end of the Seat (13) with a 1/4” x  
1 1/2” Bolt (82) and a 1/4” Flat Washer (71).  
82  
35  
Pull the indicated Adjustment Knob (78) and slide the  
tube on the Seat Adjustment Frame (90) into the slot  
in the Butterfly Seat Frame (14). Snap the Knob into  
a hole in the Frame and secure it by turning the  
Adjust-ment Knob clockwise.  
14  
55. Note: When using the Curl Pad (91), you must  
remove the 2” Square Inner Cap (28) that is in the  
Butterfly Front Leg (3). Replace the Inner Cap  
when you are not using the Curl Pad.  
55  
49  
Attach the Curl Pad (91) to the Curl Post (107) with  
two 1/4” x 3/4” Bolts (49).  
91  
28  
107  
Insert the Curl Post (107) into the top of the Butterfly  
Front Leg (3).  
3
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
56. Press a 1” x 2” Inner Cap (83) into each end of a  
Backrest Adjustment Frame (70). Press a 1 1/4”  
Square Inner Cap (35) into the tube on the Backrest  
Adjustment Frame.  
56  
83  
82  
71  
99  
2
35  
Insert a 1/4” x 1 1/2” Carriage Bolt (101) into the cen-  
ter hole in a Seat Plate (65). Attach the Seat Plate to  
the Press Backrest (99) with two 1/4” x 3/4” Bolts (49).  
70  
78  
68  
Insert the 1/4” x 1 1/2” Carriage Bolt (101) into the  
indicated hole in the Backrest Adjustment Frame (70)  
and secure it with a 1/4” Flat Washer (71) and a 1/4”  
Nylon Locknut (68). Secure the other end of the  
Backrest (99) with a 1/4” x 1 1/2” Bolt (82) and a 1/4”  
Flat Washer (71).  
49  
71  
83  
65  
101  
57  
13  
Pull the indicated Adjustment Knob (78) and slide the  
tube on the Backrest Adjustment Frame (70) into the  
Press Upright (2). Snap the Knob into a hole in the  
Frame and turn it clockwise until it is tight.  
65  
49  
45  
57. Insert a 1/4” x 2 1/2” Carriage Bolt (45) into the cen-  
ter hole in a Seat Plate (65). Attach the Seat Plate to  
a Seat (13) with two 1/4” x 3/4” Bolts (49).  
71  
7
Insert the 1/4” x 2 1/2” Carriage Bolt (45) into the  
indicated hole in the Press Seat Frame (7) and tight-  
en a 1/4” Flat Washer (71) and a 1/4” Nylon Locknut  
(68) onto it. Attach the other end of the Seat (13)  
with a 1/4” x 2 1/2” Bolt (79) and a 1/4” Flat Washer.  
79  
68  
58. Press 3/4” Round Inner Caps (43) into the ends of  
both Pad Tubes (42).  
58  
43  
Insert one Pad Tube (42) into the Leg Lever (41).  
Slide a Foam Pad (30) onto each end of the Pad  
Tube.  
30  
43  
42  
41  
43  
30  
Insert the other Pad Tube (42) into the Butterfly Front  
Leg (3). Slide a Foam Pad (30) onto each end of the  
Pad Tube.  
3
43  
42  
59. Remove the pre-assembled 1/4” x 5/8” Screws (95)  
from the Weight Top Frame (66).  
59  
66  
Orient one Right Shroud (34) and one Left Shroud  
(109) as shown. Attach the Shrouds to the brackets  
on the Weight Top Frame (66) with the 1/4” x 5/8”  
Screws (95).  
95  
34  
109  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
60. Remove the pre-assembled 1/4” x 5/8” Screws (95)  
from the Weight Base (5). Attach the Right and Left  
Shrouds (34, 109) to the brackets on the Weight Base  
(5) with the 1/4” x 5/8” Screws (95).  
60  
34  
Repeat steps 59 and 60 to attach the other set of  
shrouds (not shown) over the other weight stack.  
109  
5
95  
61. Attach the Press Plate (55) to the Press Front Leg  
(20) by securing it with the Lock Pin (22). Note: The  
lip on the Press Plate must be on the upper edge.  
61  
22  
55  
See the inset drawing. Be sure that the Lock Pin  
(22) is positioned as shown.  
20  
55  
22  
62. Make sure that all parts are properly tightened. The use of the remaining parts will be explained in  
Adjustment, beginning on page 24 of this manual.  
Before using the weight system, pull each cable a few times to make sure that the cables move smoothly  
over the pulleys. If one of the cables does not move smoothly, find and correct the problem. IMPORTANT: If  
the cables are not properly installed, they may be damaged when heavy weight is used. If there is  
any slack in the cables, you will need to remove the slack by tightening the cables. See Trouble-  
Shooting and Maintenance on page 25.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable Diagrams  
The cable diagrams below and on the next page show the proper routing of the Butterfly Cable (73), the Ab  
Cable (74), the Low Cable (75), and the High Cable (72). The numbers show the correct route for each Cable.  
Make sure that the Cables are routed correctly, that the pulleys move smoothly, and that the cable traps  
do not touch or bind the Cables. Incorrect cable routing can damage the weight system.  
Butterfly Cable (73)  
5
Low Cable (75)  
1
4
2
3
3
4
Ab Cable (74)  
5
1
7
2
1
Cable ID Chart  
3
2
(73)—72”  
8
5
(75)—123 1/4”  
(74)—234 3/4”  
4
6
(72)—369”  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
High Cable (72)  
13  
1
2
14  
3
12  
9
10  
8
4
5
11  
7
6
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustment  
The instructions below describe how each part of the weight system can be adjusted. IMPORTANT: When  
using an attachment, make sure it is in the correct starting position for the exercise to be performed. If  
there is any slack in the cables or chain as an exercise is performed, the effectiveness of the exercise  
will be reduced.  
Attaching the Lat Bar, Row Bar, Nylon Strap, or Ab  
Strap to the Low Pulley Station, the High Pulley  
Station, or the Ab Pulley Station.  
Attach the Lat Bar (61) to the Low Cable (75) with a  
Cable Clip (69). For some exercises, the Chain (67)  
should be attached between the Lat Bar and the Low  
Cable with two Cable Clips. Adjust the length of the  
Chain between the Lat Bar and the Low Cable so the  
Lat Bar is in the correct starting position for the exer-  
44  
58  
67  
cise to be performed.  
69  
The Row Bar (44), Nylon Strap (58), or Ab Strap (81) can  
be attached in the same manner.  
75  
Use the same method for attaching any of the attach-  
ments to the High Cable (72, not shown) or the Ab Cable  
(74, not shown).  
69  
81  
61  
Adjusting the Butterfly Backrest, Butterfly Seat, or  
Press Backrest  
2
To adjust the Press Backrest (99), loosen the Adjustment  
Knob (78) by turning it counterclockwise. Pull the Knob  
and slide the Backrest forward or backward as needed.  
Release the Adjustment Knob and snap it into one of the  
holes in the Backrest Adjustment Frame (70). Retighten  
the Knob by turning it clockwise.  
99  
78  
Changing the Weight Setting  
To change the setting of either weight stack, insert a  
Weight Pin (19) under the desired Weight (21). Make sure  
you insert the Weight Pin as far as it will go.  
21  
Note: Due to the cables and pulleys, the amount of  
resistance at each exercise station may vary from the  
weight setting. Use the Weight Resistance Chart on  
page 27 to find the approximate amount of resistance  
at each weight station.  
19  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the Press Plate  
22  
Remove the Lock Pin (22) from the Press Plate (55) and  
the Press Front Leg (20).  
Align the holes in the Press Plate (55) with the desired  
set of holes in the Press Front Leg (20). Re-insert the  
Lock Pin (22) through the Press Front Leg and the Press  
Plate.  
55  
20  
Trouble-shooting and Maintenance  
Inspect and tighten all parts each time you use the weight system. Replace any worn parts immediately. The  
weight system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents.  
Tightening the Cables  
A
Woven cable, the type of cable used on the weight sys-  
tem, can stretch slightly when it is first used. If there is  
slack in the cables before resistance is felt, the cables  
should be tightened. Slack can be removed from the  
cables in several different ways:  
7
24  
A. Move the indicated 3 1/2” Pulley (24) to another set  
of holes in the bracket on the Press Upright (2).  
Moving the Pulley closer to the Press Upright will  
tighten the cables. Moving it further away from the  
Upright will loosen the cable.  
2
B. Remove the 3 1/2” Pulley (24) and the Cable Trap  
(25) from a set of Pulley Plates (23). Re-attach the  
Pulley and the Cable Trap to the inner hole in the  
Pulley Plates with the 3/8” x 2” Bolt (54) and the 3/8”  
Nylon Locknut (50). Note: If the Cable is still too  
loose after moving a Pulley, repeat the process  
with another Pulley.  
B
Adjustment  
holes  
23  
50  
25  
54  
24  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
C. The bolt on the Ab Cable (74) and the High Cable  
(72) that are attached to the weight stacks can also  
be used to tighten the cables.  
C
74  
Remove the “U”-Bracket (97) from the Short Weight  
Tube (17). Tighten the 1/4” Nylon Locknut (68) onto  
the bolt on the end of the Ab Cable (74) two turns.  
Re-attach the “U”-Bracket (97) with the 5/16” x 1 3/4”  
Bolt (60) and the 5/16” Nylon Locknut (64).  
72  
64  
Bolt  
97  
60  
The High Cable (72) can be tightened in the same  
manner.  
71  
68  
17  
Note: The shrouds are shown removed for clarity.  
The shrouds do not need to be removed to tight-  
en the cables.  
Note: If a cable tends to slip off the pulleys often,  
the cable may have become twisted. Remove the  
cable and re-install it.  
If the cables need to be replaced, see Ordering  
Replacement Parts on the back cover of this manual.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Weight Resistance Chart  
The chart below shows the approximate weight resistance at each exercise station. “Top” refers to the 6 lb. top  
weight; the other numbers refer to the 12.5 lb. weight plates. Note: The actual resistance at each station may  
vary due to differences in individual weight plates as well as friction between the cables, pulleys, and  
weight guides.  
WEIGHT  
PLATES  
HIGH  
PULLEY  
(lbs.)  
LEG  
RAISE  
(lbs.)  
LEG  
PRESS  
(lbs.)  
ARM  
PRESS  
(lbs.)  
BUTTERFLY  
ARMS  
AB  
STATION  
(lbs.)  
LOW  
PULLEY  
(lbs.)  
(lbs.)  
TOP  
1
17  
31  
18  
34  
50  
66  
82  
97  
113  
-
23  
8
11  
25  
39  
52  
66  
80  
93  
-
14  
28  
42  
56  
69  
83  
97  
-
11  
24  
38  
51  
64  
78  
91  
-
55  
22  
2
45  
88  
37  
3
59  
120  
152  
185  
217  
250  
282  
314  
347  
379  
411  
51  
4
73  
66  
5
87  
80  
6
101  
115  
129  
143  
157  
171  
185  
95  
7
109  
124  
138  
153  
167  
182  
8
-
-
-
-
9
-
-
-
-
10  
11  
12  
-
-
-
-
-
-
-
-
-
-
-
-
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R0401A  
Part Identification Chart—Model No. PFSY74490  
1/2" Nylon Jam Nut (106 )  
1” Tap Screw (80)  
5/16" Washer (36)  
3/8" Flat Washer (48)  
1/4" Flat Washer (71)  
3/8" Nylon Jam Nut (63)  
3/8" Nylon Locknut (50)  
1/4" x 3/4" Bolt (49)  
1/4" Nylon Locknut (68)  
1/4" x 5/8" Screw (95)  
5/16" Nylon Locknut (64)  
1/2" x 3 1/2" Bolt (105)  
1/4" x 1 1/2" Carriage Bolt (101)  
1/4" x 1 1/2" Bolt (82)  
1/4" x 2 1/2" Carriage Bolt (45)  
1/4" x 2 1/2" Bolt (79)  
5/16" x 2 3/4" Bolt (89)  
5/16" x 2 1/2" Carriage Bolt (92)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3/8" x 1 3/4" Bolt (57)  
5/16" x 1 3/4" Bolt (60)  
3/8" x 2" Bolt (54)  
3/8" x 2 1/2" Bolt (53)  
3/8" x 2 3/4" Bolt (46)  
3/8" x 3 1/4" Bolt (62)  
3/8" x 3 1/2" Bolt (56)  
3/8" x 3 3/4" Carriage Bolt (85)  
3/8" x 3 3/4" Bolt (59)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3/4" Round Inner Cap (43)  
1" Inner Cap (76)  
Retainer Ring (31)  
1" Round Outer Cap (38)  
1” x 2" Inner Cap (83)  
1 1/4" Square Inner Cap (35)  
2" Square Inner Cap (28)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R0401A  
Part List—Model No. PFSY74490  
Key No. Qty.  
Description  
Key No. Qty.  
Description  
1
2
3
4
5
6
7
8
1
1
1
1
1
1
1
1
1
1
1
1
2
1
4
2
1
Butterfly Upright  
Press Upright  
Butterfly Front Leg  
Butterfly Base  
Weight Base  
Press Base  
Press Seat Frame  
Press Frame  
Press Top Frame  
Left Butterfly Arm  
Right Butterfly Arm  
Butterfly Backrest  
Seat  
Butterfly Seat Frame  
Weight Guide  
Top Weight  
Short Weight Tube  
Weight Tube Bumper  
Weight Pin  
Press Front Leg  
Weight  
Lock Pin  
Pulley Plate  
3 1/2” Pulley  
Cable Trap  
Small Support Plate  
“V”-Pulley  
2” Square Inner Cap  
Butterfly Foam Pad  
Foam Pad  
Retainer Ring  
Large Cable Trap  
Butterfly Top Frame  
Right Shroud  
1 1/4” Square Inner Cap  
5/16” Washer  
Butterfly Arm Bushing  
1” Round Outer Cap  
Plastic Grip  
Bumper  
Leg Lever  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
87  
88  
89  
90  
91  
92  
93  
94  
95  
96  
97  
98  
99  
100  
101  
102  
103  
104  
105  
106  
107  
108  
109  
#
3
2
1
11  
2
1
1
15  
32  
3
1
1
5
4
2
10  
1
1
1
1
2
2
3
1
1
1
4
6
2
1
2
2
2
22  
1
1
8
1
6
8
1
2
1
1
2
2
2
1
1
1
1
1
1
2
1
3/8” x 3 1/2” Bolt  
3/8” x 1 3/4” Bolt  
Nylon Strap  
3/8” x 3 3/4” Bolt  
5/16” x 1 3/4” Bolt  
Lat Bar  
3/8” x 3 1/4” Bolt  
3/8” Nylon Jam Nut  
5/16” Nylon Locknut  
Seat Plate  
Weight Top Frame  
Chain  
1/4” Nylon Locknut  
Cable Clip  
Backrest Adjustment Frame  
1/4” Flat Washer  
High Cable  
Butterfly Cable  
Ab Cable  
Low Cable  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
2
2
1
18  
1
1” Inner Cap  
Press Arm  
Adjustment Knob  
1/4” x 2 1/2” Bolt  
1” Tap Screw  
4
23  
19  
2
2
21  
2
4
4
2
1
2
3
6
2
2
4
1
1
2
4
1
1
7
2
21  
8
28  
4
Ab Strap  
1/4” x 1 1/2” Bolt  
1” x 2” Inner Cap  
3/8” x 1” Bolt  
3/8” x 3 3/4” Carriage Bolt  
Small Grip  
Press Grip  
Butterfly Grip  
5/16” x 2 3/4” Bolt  
Seat Adjustment Frame  
Curl Pad  
5/16” x 2 1/2” Carriage Bolt  
Workout Decal  
Support Plate  
1/4” x 5/8” Screw  
Long Weight Tube  
“U” Bracket  
2” x 3” Inner Cap  
Press Backrest  
Plastic Bushing  
1/4” x 1 1/2” Carriage Bolt  
4 1/2” Pulley  
Pad Tube  
3/4” Round Inner Cap  
Row Bar  
1/4” x 2 1/2” Carriage Bolt  
3/8” x 2 3/4” Bolt  
Pulley Covers  
3/8” Flat Washer  
1/4” x 3/4” Bolt  
3/8” Nylon Locknut  
Weight Bumper  
3/8” x 9” Bolt  
Angle Spacer  
3/8” x 4” Carriage Bolt  
1/2” x 3 1/2” Bolt  
1/2” Nylon Jam Nut  
Curl Post  
3/8” x 5” Bolt  
Left Shroud  
1
2
9
1
3/8” x 2 1/2” Bolt  
3/8” x 2” Bolt  
Press Plate  
User’s Manual  
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R0401A  
Exploded Drawing—Model No. PFSY74490  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ordering Replacement Parts  
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through  
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give  
the following information:  
• The MODEL NUMBER of the product (PFSY74490)  
• The NAME of the product (PROFORM® 920Ci weight system)  
• The SERIAL NUMBER of the product (see the front cover of this manual)  
• The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING  
attached at the center of this manual).  
Limited Warranty  
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and mate-  
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This  
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing  
or repairing, at ICON's option, the product at one of its authorized service centers. All products for which war-  
ranty claim is made must be received by ICON at one of its authorized service centers with all freight and  
other transportation charges prepaid, accompanied by sufficient proof of purchase. All returns must be pre-  
authorized by ICON. This warranty does not extend to any product or damage to a product caused by or  
attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an  
ICON authorized service center, products used for commercial or rental purposes, or products used as store  
display models. No other warranty beyond that specifically set forth above is authorized by ICON.  
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connec-  
tion with the use or performance of the product or damages with respect to any economic loss, loss of prop-  
erty, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other consequen-  
tial damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or con-  
sequential damages. Accordingly, the above limitation may not apply to you.  
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-  
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth here-  
in. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limi-  
tation may not apply to you.  
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.  
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813  
PROFORM is a registered trademark of ICON Health & Fitness, Inc.  
Part No. 159777 R0401A  
Printed in Canada © 2001 ICON Health & Fitness, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Peavey Stereo Amplifier TB RAXX User Manual
Pelco Projector C1900M User Manual
Philips Digital Photo Frame SPF5008 User Manual
Philips DVD Player DVD 691 User Manual
Philips Fax Machine IPF520 User Manual
Philips Home Theater System HTS3100 User Manual
Philips TV Receiver 29PT5435 User Manual
Pioneer Stereo System HTZ 575DV User Manual
Pioneer TV Mount PWM 6121 User Manual
PYLE Audio Car Video System PLVW1040R User Manual