¨
Model No. PFST51080
Serial No.
Write the serial number in the
space above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are
committed to complete customer
satisfaction. If you have ques-
tions, or if there are missing
parts, we will guarantee com-
plete satisfaction through direct
assistance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni-
cians on our customer hot line
will provide immediate assis-
tance, free of charge to you.
CUSTOMER HOT LINE:
1-800-999-3756
Mon.ÐFri., 6 a.m.Ð6 p.m. MST
VISIT OUR WEBSITE:
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Keep this manual for future
reference.
USERÕS MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the new PROFORM¨ 225C
stepper. The 225C stepper blends advanced engi-
neering with contemporary styling to provide you with
a low-impact workout in the convenience and privacy
of your own home.
Customer Service Department toll-free at 1-800-999-
3756, Monday through Friday, 6 a.m. until 6 p.m.
Mountain Time (excluding holidays). To help us assist
you, please mention the product model number and
serial number when calling. The model number is
PFST51080. The serial number can be found on a
decal attached to the stepper (see the front cover of
this manual for the location of the decal).
For your benefit, read this manual carefully before
you use the PROFORM¨ 225C stepper. If you have
questions after reading the manual, please call our
PART IDENTIFICATION CHART
Use the drawings below to identify the small parts used in assembly. The number in parenthesis below each
drawing refers to the key number of the part, from the PART LIST on page 10. The second number refers to the
quantity used in assembly. Note: If a part is not found in the parts bag, check to see if it has been
preassembled.
M10 Locknut (15)Ð8
M8 Lock Washer (23)Ð2
M10 x 40mm Bolt (25)Ð2
M8 x 19mm Button
Head Bolt (21)Ð2
M10 x 82mm Carriage Bolt (24)Ð2
M4 x 12mm Console
Screw (22)Ð4
M4 x 10mm Screw (28)Ñ8
M4 x 16mm Screw (27)Ñ4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Place all parts of the stepper in a cleared area and remove the packing materials. Do not dispose of the packing
materials until assembly is completed. Assembly requires the included allen wrench
, a phillips
.
screwdriver
, two adjustable wrenches
and a rubber mallet
1. Attach the Stabilizer (8) to the Base (2) with two
M10 x 82mm Carriage Bolts (24) and two M10
Locknuts (15).
1
15
1
Slide the Upright (1) onto the threaded bolts in the
Base (2). Make sure that the Upright is angled in
the direction shown. Attach the Upright with four
M10 Locknuts (15).
2
8
15
24
2. Refer to drawing 2a. Identify the Right Pedal Leg (7)
and the Left Pedal Leg (6). Note the positions of the
welded tubes and the Magnet (26).
2a
2b
11
Tubes
26
Refer to drawing 2b. Attach a Pedal (11) to each
Pedal Leg (6, 7) with four M4 x 10mm Screws (28).
6
7
6, 7
28
3. Slide a Metal Cap (30) onto the indicated shaft on
the Base (2). Make sure that the open side of the
Metal Cap is facing the Base.
3
Next, apply grease to the shaft on the Base (2).
Apply Grease
to Shaft
Apply grease to the Pedal Leg Bushings (16) that
are in the Right Pedal Leg (7).
6
Apply
Grease
Slide the Right Pedal Leg (7) onto the shaft on the
Base (2). Tap a 3/4Ó Axle Cap (17) onto the shaft.
2
30
Repeat this step to attach the Left Pedal Leg (6).
16
17
7
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Apply grease to the lower shafts on the Upright (1).
4
Apply
Grease
19
18
Slide a Cylinder Spacer (19) and a Resistance
Cylinder (9) onto each of the lower shafts on the
Upright (1). Make sure that the Resistance
Cylinders are turned so the arrows are on the
side shown. Tap a 5/8Ó Axle Cap (18) onto each
shaft.
Arrow
9
19
18
1
9
Attach the lower ends of the Resistance Cylinders
(9) to the brackets on the Right and Left Pedals (6,
7) with the M10 x 40mm Bolts (25) and two M10
Locknuts (15).
7
15
25
6
Bracket
5. Insert the Handlebar Bushings (20) into the Right
and Left Handlebars (4, 5). Slide the Handlebar
Bushings and the Handlebars onto the upper shafts
on the Upright (1). While another person holds the
Handlebars, slide the Top Handlebar (3) into the
Right and Left Handlebars. Loosely thread four M4 x
16mm Screws (27) into the Handlebars and the Top
Handlebar. Do not tighten the Screws yet.
5
3
27
12
21
5
27
23
Insert the Reed Switch Wire (12) through the Top
Handlebar (3). Attach the Top Handlebar to the
Upright (1) with two M8 x 19mm Button Head Bolts
(21) and two M8 Lock Washers (23).
21
1
4
Tighten the four M4 x 16mm Screws (27).
20
6. Plug the Reed Switch Wire (12) into the socket in
the back of the Console (10). Next, insert the
excess Reed Switch Wire down into the Upright (1).
Attach the Console to the Upright with four M4 x
12mm Console Screws (22). Be careful to avoid
pinching the Reed Switch Wire.
6
Cover
10
Clip
The Console (10) requires two ÒAAÓ batteries (not
included). Alkaline batteries are recommended.
Refer to the inset drawing. To install batteries, first
slide off the battery cover and carefully remove the
battery clip from the Console. Insert two batteries
into the battery clip. Make sure that the negative
ends of the batteries (marked ÒÐÓ) are touching
the springs in the battery clip. Insert the battery
clip into the Console and reattach the battery cover.
12
22
1
7. Make sure that all parts are properly tightened before you use the stepper.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE STEPPER
Note: If there is a thin sheet of clear plastic on
the face of the console, remove it.
The innovative console offers a manual mode and
three pacer programs. The pacer programs are
designed to help you achieve your exercise goals by
pacing your exercise. The console also features six
monitor modes that provide continuous exercise feed-
back.
The three graphs on the console show how the target
pace will change during the pacer programs (see the
drawing above). Each graph is divided into ten
columns, and each column represents a two-minute
time period. The bars in each column show what the
target pace will be during that two-minute period. For
example, in the first column of graph 2, there is one
bar. This shows that during the first two minutes of
program 2, the target pace will be 40 repetitions
(steps) per minute (see the scale at the right end of
the graph). In the second column, there are three
bars. This shows that during the second two-minute
period, the target pace will be 60 repetitions per
minute. Each pacer program is twenty minutes long.
HOW THE PACER PROGRAMS OPERATE
When you use a
Actual Pace
pacer program,
two columns of
bars will appear in
the display. The
left column will
show a target
DESCRIPTION OF THE MONITOR MODES
pace, which is
determined by the
program you have
selected; the right
The six monitor modes provide continuous exercise
feedback. The modes are described below.
Target Pace
column will show your actual pace. The target pace
will change periodically during the program; as the tar-
get pace changes, simply adjust your pace to keep
both columns at the same height. Important: The tar-
get pace is a goal pace. Your actual pace may be
slower than the target pace, especially during the
first few months of your exercise program. Be
sure to exercise at a pace that is comfortable for
you.
¥ Reps/MinÑThis mode shows your pace, in repeti-
tions (steps) per minute.
¥ TimeÑIf you select one of the three pacer pro-
grams, this mode will count down the time remain-
ing in the program. If you select the manual mode,
this mode will count up the length of time you have
exercised. Note: If you stop exercising for ten sec-
onds or longer, the time mode will pause.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
¥ DistanceÑThis mode shows the total number of
repetitions (steps) you have completed, up to 999.
The display will then reset to zero and continue
counting.
Begin your workout
3
If you selected
the manual
mode, go to
step 4. If you
selected one of
the pacer pro-
grams, two
¥ Fat calories (FAT CALS)ÑThis mode shows the
approximate number of fat calories you have
burned. (See BURNING FAT on page 9 for an
explanation of fat calories.)
columns of
bars will
appear in the
Target Pace Actual Pace
¥ Calories (CALS)ÑThis mode shows the approxi-
mate number of calories you have burned. (This
number includes both fat calories and carbohydrate
calories.)
display. The left column will show one bar, show-
ing that the target pace is 40 repetitions per
minute. The right column will show your actual
pace. Adjust your pace until only one bar appears
in the right column. As the program progresses,
the target pace will change periodically; as the tar-
get pace changes, adjust your pace to keep both
columns at the same height. Remember, the tar-
get pace is a goal pace. Your actual pace may
be slower than the target pace, especially dur-
ing the first few months of your exercise pro-
gram. Be sure to exercise at a pace that is
comfortable for you.
¥ ScanÑThis mode displays the calories, fat calories,
reps/min, time, and distance modes, for five sec-
onds each, in a repeating cycle.
STEP-BY-STEP CONSOLE OPERATION
Before the console can be operated, two ÒAAÓ bat-
teries must be installed. (See assembly step 6 on
page 5 for installation instructions.) Follow the steps
below to operate the console.
Turn on the power
Follow your progress with the monitor modes
1
4
To turn on the
power, press
When the
power is turned
Mode Indicators
the on/reset
button or sim-
on, the scan
mode will auto-
ply begin
exercising on
matically be
selected. One
the stepper. When the power is turned on, the
entire display will appear for two seconds. The
console will then be ready for use. Note: If batter-
ies were just installed, the power will already be on.
mode indicator
will show that
the scan mode
is selected, and
a flashing mode indicator will show which mode is
currently displayed. Note: If you select a different
mode, you can select the scan mode again by
repeatedly pressing the mode button.
Select one of the three pacer programs or the
manual mode
2
To select one
of the pacer
programs,
repeatedly
press the pro-
gram button.
The program
indicator will
Program Indicator
If desired, you can select the reps/min, time, dis-
tance, fat calories or calories mode for continuous
display. To select one of these modes, repeatedly
press the mode button. The mode indicators will
show which mode is selected. (Make sure that the
scan mode is not selected.)
show which
program you
If desired, the display can be reset by pressing
the on/reset button.
have selected. To select the manual mode, press
the program button until the program indicator dis-
appears. The programs will be selected in the fol-
lowing order: program 1, program 2 , program 3,
manual mode.
Turn off the power
5
To turn off the power, simply wait for about six
minutes. If the pedals are not moved and the
console buttons are not pressed for six minutes,
the power will turn off automatically.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO EXERCISE ON THE STEPPER
HOW TO ADJUST THE RESISTANCE
Place the stepper on a level surface and place a mat
under the stepper. (The stepper features precision
hydraulic cylinders. However, there is a possibility of
slight oil leakage due to the nature of hydraulic cylin-
ders.)
To change the stepping resistance, simply turn the
resistance collars on the upper ends of the Resistance
Cylinders (9) (see the inset drawing). The arrows on
the Resistance Cylinders and the markings on the
resistance collars show which resistance level has
been selected. Make sure that both Resistance
Cylinders are at the same resistance setting.
Hold the handlebars and step onto the pedals. Begin
stepping, alternately depressing the right and left ped-
als with a smooth, continuous motion. Because the
pedals move independently of each other, you must
maintain a continuous motion or both pedals will sink
to the floor. Change the height of your step or the
stepping pace until you can comfortably maintain a
continuous motion.
Resistance
Collar
5
9
9
As you step, you can exercise your upper leg mus-
cles by keeping your feet flat on the pedals. To focus
on your calf muscles, rise on your toes as you step.
Stand erect or lean forward slightly as you exercise.
Always keeping your back straight in order to avoid
injury.
WARNING: The resistance cylinders become very
hot during use. Touch only the resistance collars
when changing the stepping resistance.
MAINTENANCE AND TROUBLE-SHOOTING
Inspect and tighten all parts each time you use the If the console still
stepper. The stepper can be cleaned using a soft cloth does not function
7
and mild, non-abrasive detergent.
properly, the Reed
Switch (12) should
be adjusted. Hold
down the Right Pedal
Leg (7) so that the
Magnet (26) is level
with the Reed Switch
(12). Slide the Reed
Switch (12) in or out
slightly. The gap
To prevent damage to the
console, use only a
sealed water bottle in the
water bottle holder. In
addition, keep liquid away
from the console, keep
the console out of direct
sunlight, and remove the
batteries when storing the stepper.
Water Bottle
Holder
12
26
between the Reed
Switch and the Magnet should be about 1/8Ó. Make
sure that the Magnet will not hit the Reed Switch when
the Right Pedal Leg is moved. Repeat until the con-
sole displays correct feedback.
REED SWITCH ADJUSTMENT
If the console does not function properly, or if the dis-
play becomes faint, the batteries should be replaced.
See assembly step 6 on page 5.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition
and adequate rest are essential for successful results.
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy.
If your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber in your training zone as you exercise.
WARNING: Before beginning this or any exer-
cise program, consult your physician. This is
especially important for persons over the age
of 35 or persons with pre-existing health
problems.
For maximum fat burning, adjust the intensity of your
exercise until your heart rate is near the middle num-
ber in your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exer-
cise is activity that requires large amounts of oxygen
for prolonged periods of time. This increases the
demand on the heart to pump blood to the muscles,
and on the lungs to oxygenate the blood. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat
burning, and cardiovascular (aerobic) exercise.
HOW TO MEASURE YOUR HEART RATE
To measure your
heart rate, first exer-
cise for at least four
minutes. Then, stop
exercising and place
two fingers on your
wrist as shown. Take
a six-second heart-
beat count, and mul-
tiply the result by 10
to find your heart rate. For example, if your six-second
heartbeat count is 14, your heart rate is 140 beats per
minute. (A six-second count is used because your
heart rate will drop rapidly when you stop exercising.)
WORKOUT GUIDELINES
To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to
the nearest ten years). Next, find the three numbers
to the right of your age. The three numbers are your
Òtraining zone.Ó The lowest number is the recommend-
ed heart rate for fat burning; the middle number is the
heart rate for maximum fat burning; the highest
number is the heart rate for aerobic exercise.
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretch-
ing and light exercise. A proper warm-up increases
your body temperature, heart rate, and
circulation in preparation for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
Burning Fat
To burn fat effectively, you must exercise at a rela-
tively low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
9
Download from Www.Somanuals.com. All Manuals Search And Download.
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. Caution: Be sure to progress at your own
pace and avoid overdoing it. Incorrect or excessive
training may result in injury to your health.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
Remember, the key to success is make exercise a
regular and enjoyable part of your everyday life.
PART LISTÑModel No. PFST51080
R0998A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
1
1
1
1
1
1
1
2
1
2
1
4
1
8
4
2
Upright
Base
18
19
20
21
22
23
24
25
26
27
28
29
30
31
#
2
2
2
2
4
2
2
2
1
6
8
2
2
2
1
1
1
5/8Ó Axle Cap
Cylinder Spacer
Handlebar Bushing
Top Handlebar
Right Handlebar
Left Handlebar
Left Pedal Leg
Right Pedal Leg
Stabilizer
Resistance Cylinder w/Bushing
Console
Pedal
Reed Switch w/Wire
Endcap
Grommet
M10 Locknut
Pedal Leg Bushing
3/4Ó Axle Cap
M8 x 19mm Button Head Bolt
M4 x 12mm Console Screw
M8 Lock Washer
M10 x 82mm Carriage Bolt
M10 x 40mm Bolt
Magnet w/Holder
M4 x 16mm Screw
M4 x 10mm Screw
Plastic Bumper
Metal Cap
Foam Grip
UserÕs Manual
Grease Packet
Allen Wrench
#
#
Note: Ò#Ó refers to a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWINGÑModel No. PFST51080
R0998A
31
27
10
3
21
20
23
22
5
27
23
21
1
18
20
19
9
31
4
11
19
18
15
17
16
25
9
14
13
6
15
29
27
16
13
30
12
2
28
30
15
13
25
16
8
11
26
15
17
13
7
29
27
25
28
28
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO ORDER REPLACEMENT PARTS
To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). To help us assist you, please be prepared to give
the following information:
¥ The MODEL NUMBER of the product (PFST51080).
¥ The NAME of the product (PROFORM¨ 225C stepper).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 10 of this manual).
PROFORM¨ is a registered trademark of ICON Health & Fitness, Inc.
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim-
ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service cen-
ters with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase.
All returns must be pre-authorized by ICON. This warranty does not extend to any product or damage to
a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center, to products used for commercial or rental pur-
poses, or to products used as store display models. No other warranty beyond that specifically set forth
above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 149204 R0998A
Printed in China © 1998 ICON Health & Fitness, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|