Model No. PFEX44177.0
Serial No.
USER'S MANUAL
Serial Number
Decal (under frame)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-533-1333
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precau-
tions before using the exercise cycle.
1. Read all instructions in this manual and all
warnings on the exercise cycle before using
the exercise cycle.
10. The pulse sensor is not a medical device.
Various factors, including the user's move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
2. Use the exercise cycle only as described in
this manual.
3. It is the responsibility of the owner to ensure
that all users of the exercise cycle are ade-
quately informed of all precautions.
11. Always keep your back straight while using
the exercise cycle; do not arch your back.
12. If you feel pain or dizziness while exercising,
stop immediately and cool down.
4. The exercise cycle is intended for home use
only. Do not use the exercise cycle in
a commercial, rental, or institutional setting.
13. The decal shown below has been placed on
the exercise cycle. If the decal is missing, or
if it is illegible, call the toll-free telephone
number on the front cover of this manual and
order a free replacement decal. Apply the
decal in the location shown.
5. Keep the exercise cycle indoors, away from
moisture and dust. Place the exercise cycle
on a level surface, with a mat beneath it to
protect the floor or carpet. Make sure that
there is enough clearance around the exer-
cise cycle to mount, dismount, and use it.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7. Keep children under the age of 12 and pets
away from the exercise cycle at all times.
8. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the exercise cycle. Always wear
athletic shoes for foot protection.
9. The exercise cycle should not be used by
persons weighing more than 250 pounds.
WARNING:
Before beginning this or any exercise program, consult your physician.
This is especially important for persons over the age of 35 or persons with pre-existing health prob-
lems. Read all instructions before using. ICON assumes no responsibility for personal injury or
property damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Congratulations for selecting the revolutionary PRO-
of this manual. To help us assist you, note the product
model number and serial number before contacting
us. The model number is PFEX44177.0. The serial
number can be found on a decal attached to the exer-
cise cycle (see the front cover of this manual for the
location of the decal).
®
FORM 450 UR exercise cycle. Cycling is one of the
most effective exercises for increasing cardiovascular
fitness, building endurance, and toning the entire
body. The 450 UR exercise cycle offers an impressive
array of features, including a console with two motiva-
tional interactive games, designed to let you enjoy this
healthful exercise in the comfort and convenience of
your home.
To avoid a registration fee for any service needed
under warranty, you must register the exercise
For your benefit, read this manual carefully before
you use the exercise cycle. If you have questions
after reading this manual, please see the front cover
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
Grip
Game Controller
Handgrip Pulse Sensor
Console
Handlebar
Water Bottle Holder
(no water bottle is included)
FRONT
Seat
Seat Knob
Seat Post
Pedal with Strap
Wheel
Seat Post Knob
Side Shield
RIGHT SIDE
REAR
Leveling Foot
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
To hire an authorized service technician to assemble the exercise cycle, call toll-free 1-800-445-2480.
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
In addition to the included hex keys, assembly requires an adjustable wrench
screwdriver
and a Phillips
.
Use the drawings below to identify the small parts used in assembly. The number in parentheses below
each drawing is the key number of the part, from the PART LIST on page 22. The number following the paren-
theses is the quantity used in assembly. Note: Some small parts may have been preassembled for shipping.
If a part is not in the parts bag, check to see if it has been preassembled.
M10 Nylon
M10 Split
Black M10 Curved
Washer (61)–2
M10 Curved
Locknut (48)–2
Washer (63)–3
Washer (36)–2
M4 x 16mm
M4 x 19mm
Screw (33)–2
Black M10 x 50mm Button
Screw (64)–2
M6 x 10mm
Screw (58)–4
Screw (60)–2
M10 x 50mm Button
Screw (46)–3
M10 x 85mm Button
Screw (56)–4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
1
To make assembly easier, read the information
on page 5 before you begin assembling the
exercise cycle.
1
17
Identify the Front Stabilizer (2), which has
Wheels (17) attached. Attach the Front Stabilizer to
the Frame (1) with two M10 x 85mm Button
Screws (56).
2
56
2. Tighten the two Leveling Feet (29) into the bottom of
the Rear Stabilizer (3).
2
Attach the Rear Stabilizer (3) to the Frame (1) with
two M10 x 85mm Button Screws (56).
3
1
29
29
56
3. While another person holds the Handlebar Post (6)
near the Frame (1), connect the Upper Wire
Harness (55) to the Lower Wire Harness (51). Next,
pull the excess Upper Wire Harness out of the top of
the Handlebar Post, and slide the Handlebar Post
onto the Frame. Be careful not to pinch the Wire
Harnesses.
3
6
63
63
46
46
Attach the Handlebar Post (6) to the Frame (1) with
three M10 x 50mm Button Screws (46) and three
M10 Split Washers (63); tighten the two Button
Screws in the front of the Handlebar Post first,
and then tighten the third Button Screw.
55
51
63
1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Attach the Water Bottle Holder (18) to the
Handlebar Post (6) with two M4 x 19mm
Screws (33).
4
6
18
33
5. Have a second person hold the Handlebar (7) near
the Handlebar Post (6). Connect the Right
Controller Wire (65), which is marked with a tag, to
the right connector on the Split Wire Harness, which
is also marked with a tag. Then, connect the Left
Controller Wire (54) to the left connector on the Split
Wire Harness (25).
5
25
36
48
55
25
36
54
Attach the Handlebar (7) to the Handlebar Post (6)
with two Black M10 x 50mm Button Screws (64),
two Black M10 Curved Washers (61), two M10
Curved Washers (36), and two M10 Nylon
Locknuts (48). Be careful to avoid pinching the
wires.
65
6
7
61
61
64
6. The Console (9) requires four 1.5V “D” batteries
(not included); alkaline batteries are recommended.
Press the tab on the battery cover and remove the
battery cover. Next, insert four batteries into the
Console. Make sure that the batteries are orient-
ed as shown by the diagram inside the battery
compartment. Then, reattach the battery cover to
the Console.
6
Battery
Cover
9
Note: The Console (9) can be operated with an
optional power supply instead of batteries. To pur-
chase a power supply, call the telephone num-
ber on the front cover of this manual. Plug one
end of the power supply into the jack on the con-
sole. Plug the other end of the power supply into an
appropriate outlet that is properly installed in accor-
dance with all local codes and ordinances.
Batteries
7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Have a second person hold the Console (9) near the
Handlebar Post (6). Connect the console wire har-
ness to the Upper Wire Harness (55). Next, connect
the game wire on the Console to the Split Wire
Harness (25).
7
9
Game
Wire
25
Attach the Console (9) to the Handlebar Post (6)
with four M4 x 16mm Screws (58). Be careful not
to pinch the wires in the Console.
6
Console
Wire
55
58
Harness
8. Turn the Seat Post Knob (20) counterclockwise sev-
eral turns to loosen it. Next, pull the Seat Post Knob
outward, and insert the Seat Post (11) into the
Frame (1). Slide the Seat Post upward or downward
to the desired position, and release the Seat Post
Knob. Move the Seat Post upward or downward
slightly to make sure that the Seat Post Knob is
engaged in one of the adjustment holes in the
Seat Post. Then, turn the Seat Post Knob clockwise
to tighten it.
8
11
1
20
9. Attach an M6 x 10mm Screw (60) to the Seat
Post (11). Next, slide the Seat Carriage (19) onto the
Seat Post. Then, adjust the Seat Carriage to the
desired position and tighten the Seat Knob (31) into
the Seat Carriage.
9
60
11
31
See the inset drawing. Attach another M6 x 10mm
Screw (60) to the Seat Post (11).
19
60
11
8
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Identify the Left Pedal (40), which is marked with a
sticker. Using an adjustable wrench, firmly tighten
the Left Pedal counterclockwise into the Left Crank
Arm (15). Tighten the Right Pedal (not shown)
clockwise into the Right Crank Arm. Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten
the Pedals. For best performance, keep the
Pedals tightened.
10
15
Press the tab on the side of the Left Pedal (40) and
adjust the strap to the desired position. Adjust the
other strap in the same way.
Tab
Strap
40
11. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard-
ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the
floor or carpet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO OPERATE THE EXERCISE CYCLE
HOW TO ADJUST THE HEIGHT OF THE SEAT
HOW TO ADJUST THE LATERAL POSITION OF
THE SEAT
For effective exercise, the seat should be at the proper
height. As you pedal, there should be a slight bend in
your knees when the pedals are in the lowest position.
To adjust the seat,
To adjust the lateral
position of the seat,
first loosen the seat
knob a few turns.
Seat
first turn the seat
post knob counter-
Then, move the seat
forward or backward
to the desired posi-
tion, and firmly tight-
en the seat knob.
clockwise several
turns to loosen it.
Next, pull the knob,
slide the seat post
upward or down-
ward to the desired
position, and then
release the knob.
Move the seat
Seat
Seat Knob
Seat Post
Seat
Post
Knob
Seat Post
HOW TO ADJUST THE PEDAL STRAPS
To loosen the pedal
straps, press the
tabs and pull the
straps upward. To
tighten the pedal
straps, pull down-
ward on the ends
post upward or
downward slight-
ly to make sure
that the knob is
engaged in one of
Strap
the adjustment holes in the seat post. Then, turn
the knob clockwise to tighten it.
of the straps.
Tab
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
Interactive Games
The console also features four motivational interactive
games. Using the dual game controllers, play the chal-
lenging Fat Blocker™ game or the fast-paced Calorie
Destroyer™ game during your workouts—the harder
you exercise, the greater your advantage! Or, use your
wits and the interactive touch screen to win credits
while playing the classic card game of Blackjack or
Texas Hold ‘Em.
The revolutionary console offers an array of features
designed to make your workouts more effective and
enjoyable. When you use the manual mode of the con-
sole, you can change the resistance of the pedals with
the touch of a button. While you exercise, the console
will display continuous exercise feedback. You can
even measure your heart rate using the handgrip pulse
sensor.
To use the manual mode of the console, follow the
steps beginning on page 12. To use a smart program,
see page 13. To play the Fat Blocker game, see
page 15. To play the Calorie Destroyer game, see
page 16. To play the Blackjack game, see page 17.
To play the Texas Hold ‘Em game, see page 18.
Smart Programs
The console offers ten smart programs. Each program
automatically changes the resistance of the pedals
and prompts you to vary your pedaling pace as it
guides you through an effective workout.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Follow your progress with the display.
HOW TO USE THE MANUAL MODE
4
The upper left corner of the display will show
the elapsed time. Note: When a program is select-
ed, the display will show the time remaining in the
program instead of the elapsed time.
Note: If there is a sheet of clear plastic on the face
of the console, remove the plastic.
Begin pedaling or press any button on the
1
console to turn on the console.
A moment after you begin pedaling or press a
button, the display will light.
Select the manual mode.
2
Each time you
turn on the con-
sole, the manual
mode will be
selected. If you
have selected a
program, reselect
the manual mode by pressing the Program button
repeatedly until the word MANUAL appears in the
lower left corner of the display.
The lower left corner of the display will show
the distance you have pedaled, in miles or kilome-
ters.
Change the resistance of the pedals as
3
desired.
The upper right corner of the display will show
the approximate number of calories you have
burned. The upper right corner of the display will
also show your heart rate when you use the hand-
grip pulse sensor (see step 5 on page 13).
As you pedal,
change the resis-
tance of the ped-
als by pressing
the increase and
The lower right corner of the display will show
your pedaling pace in miles or kilometers per
hour.
decrease buttons
repeatedly. There
are sixteen resistance levels. Note: After you
press the buttons, it will take a moment for the
pedals to reach the selected resistance level.
The center of the display will show the resis-
tance level of the pedals for a few seconds each
time the resistance level changes.
You can also view selected information at a larger
size. Press the Display button repeatedly to view
time and distance information, time and calorie
information, or time and pace information. Press
the Display button again to view all information.
The console has three backlight options. The “On”
option keeps the backlight on while the console is
on. To conserve the batteries, the “Auto” option
keeps the backlight on only while you are pedal-
ing. The “Off” option turns the backlight off. To
select a backlight option, first press and hold
down the Program button for several seconds.
Next, press the increase button to select the
desired backlight option. Then, press the Program
button to save your selection.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
The console can show speed and distance in
either miles or kilometers. The letters MPH or
KM/H will appear in the display to show which unit
of measurement is selected. To change the unit of
measurement, first press and hold down the
Program button for several seconds. Next, press
the decrease button to select the desired unit of
measurement. Then, press the Program button to
save your selection.
HOW TO USE A SMART PROGRAM
Begin pedaling or press any button on the
1
console to turn on the console.
A moment after you begin pedaling or press a
button, the display will light.
Select a smart program.
2
Measure your heart rate if desired.
5
To select one of
Profile
If there are
the ten smart pro-
sheets of clear
grams, press the
Contacts
plastic on the
Program button
metal contacts
repeatedly until
on the handgrip
PROGRAM 1, 2,
pulse sensor,
3, 4, 5, 6, 7, 8, 9,
remove the plas-
or 10 appears in
tic. To measure
the display. The program time and a profile of the
resistance levels for the program will also appear
in the display.
your heart rate,
hold the handgrip
pulse sensor with
your palms resting against the metal contacts.
Avoid moving your hands or gripping the con-
tacts too tightly.
Begin pedaling to start the program.
3
Each program is divided into either 20, 30, or 45
one-minute segments. One resistance level and
one target pace setting are programmed for each
segment. Note: The same resistance level and/or
target pace setting may be programmed for two or
more consecutive segments.
When your pulse is detected, one, two, or three
dashes will appear in the display, and then your
heart rate will be shown. For the most accurate
heart rate reading, hold the contacts for at least 15
seconds. Note: If you continue to hold the hand-
grip pulse sensor, the display will show your heart
rate for up to 30 seconds.
The program profile will show your progress (see
the drawing above). The flashing segment of the
profile represents the current segment of the pro-
gram. The height of the flashing segment indi-
cates the resistance level for the current segment.
If the display does not show your heart rate, make
sure that your hands are positioned as described.
Be careful not to move your hands excessively or
to squeeze the metal contacts too tightly. For opti-
mal performance, clean the metal contacts using
a soft cloth; never use alcohol, abrasives, or
chemicals to clean the contacts.
When the first segment of the program ends, the
resistance level and the target pace for the sec-
ond segment will appear in the center of the dis-
play for a few seconds to alert you. The next seg-
ment of the profile will begin to flash, and the
pedals will automatically adjust to the resistance
level for the next segment.
When you are finished exercising, the console
will turn off automatically.
6
If the pedals do not move for several seconds, a
tone will sound and the console will pause. If the
pedals do not move for several minutes and the
buttons are not pressed, the console will turn off
and the display will be reset.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
As you exercise,
of the program ends, the pedals will automati-
cally adjust to the resistance level for the next
segment.
you will be
prompted to keep
your pedaling
pace near the
The program will continue in this way until the last
segment ends. To stop the program at any time,
stop pedaling. A tone will sound and the time will
begin to flash in the display. To restart the pro-
gram, simply resume pedaling.
target pace set-
ting for the cur-
rent segment. When an upward arrow appears in
the display, increase your pace. When a down-
ward arrow appears, decrease your pace. When
no arrow appears, maintain your current pace.
Follow your progress with the display.
4
5
6
See step 4 on page 12.
Important: The target pace settings are intend-
ed only to provide motivation. Your actual
pace may be slower than the target pace set-
tings. Make sure to pedal at a pace that is
comfortable for you.
Measure your heart rate if desired.
See step 5 on page 13.
When you are finished exercising, the console
will turn off automatically.
If the resistance level for the current segment is
too high or too low, you can manually override the
setting by pressing the increase and decrease
buttons. Important: When the current segment
See step 6 on page 13.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Your goal is to
maneuver the
HOW TO PLAY THE FAT BLOCKER GAME
Complete Row
blocks so that they
form a complete
row of black
The Fat Blocker game requires quick thinking and fast
reflexes. In addition to the console buttons, you will
use the four-button game controllers on the handlebar
to play the game. Follow the steps below to play the
Fat Blocker game.
squares across
the entire arena.
Each time you complete a row of black squares,
the row will disappear, and all blocks above will
move downward one row.
Begin pedaling or press any button on the
1
console to turn on the console.
As you play, the blocks will fall faster and faster;
however, your pedaling pace will affect the speed
of the blocks—the faster you pedal, the more
slowly the blocks will fall, giving you extra time to
position and orient the blocks. The game will con-
tinue until any part of a stacked block reaches the
top of the arena.
A moment after you begin pedaling or press a
button, the display will light.
Select the Fat Blocker game.
2
To select the Fat Blocker game, press the Fitness
Games button repeatedly until the words FAT
BLOCKER appear at the top of the display.
When the game ends, the display will show your
final score and the level of play that you reached.
The display will then show the four highest scores
recorded since the scores were reset. If desired,
press and hold down the right button on either
controller to reset the scores. Note: If your score
is one of the four highest, the display will prompt
you to enter a name consisting of three letters or
digits. While the line below the first letter is flash-
ing, press the up and down buttons on either con-
troller to select the desired letter or digit. Next,
press the right button on either controller and
select another letter or digit. Repeat this process
to select a third letter or digit. Then, press the
right button on either controller again. The display
will then show the four highest scores recorded
since the scores were reset.
Pedal to start the game.
3
When you start the Fat Blocker game, a game
arena will appear in the center of the display.
Follow your progress with the display.
4
5
While you exercise and play the Fat Blocker
game, the corners of the display will show the
elapsed time, the approximate number of calories
you have burned, and your pedaling pace. In addi-
tion, the display will show your current score and
the game level that you have reached.
A block composed of four or five black squares
will slowly move downward until it reaches the
bottom of the arena. Another block will then move
downward. There are blocks of eight different
shapes. As each block falls, you can move it to
the left or right using the left and right buttons on
the left controller. In addition, you can rotate the
block counterclockwise or clockwise using the left
and right buttons on the right controller. Once you
have positioned and oriented a block, you can
speed its motion to the bottom of the arena, if
desired, by pressing the down button on either
controller.
To pause the game, press the Display button. To
resume the game, press the Display button
repeatedly until the words FAT BLOCKER appear
at the top of the display, and then begin pedaling.
When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Between the drones and the laser blaster are five
shields. You can hide the laser blaster below a
shield if desired. However, each time a shield is
hit by a laser, a piece will be vaporized.
HOW TO PLAY THE CALORIE DESTROYER GAME
The Calorie Destroyer game is a fast-paced game that
pits you against a squadron of laser-firing drones. In
addition to the console buttons, you will use the four-
button game controllers on the handlebar to play the
game. Follow the steps below to play the Calorie
Destroyer game.
Your goal is to keep the laser blaster from being
hit and to keep any drone from reaching the bot-
tom of the arena. If the laser blaster is hit, it will
be disabled and another laser blaster will appear
in its place; there are a total of four laser blasters.
If you vaporize the entire squadron of drones, a
new squadron will appear.
Begin pedaling or press any button on the
1
console to turn on the console.
As you play, the drones will move faster and
faster. The game will continue until all four laser
blasters are disabled or a drone reaches the bot-
tom of the arena.
A moment after you begin pedaling or press a
button, the display will light.
Select the Calorie Destroyer game.
2
When the game ends, the display will show the
level of play that you reached and your final
score. The display will then show the four highest
scores recorded since the scores were reset. If
desired, press and hold down the right button on
either controller to reset the scores. Note: If your
score is one of the four highest, the display will
prompt you to enter a name consisting of three
letters or digits. While the line below the first letter
is flashing, press the up and down buttons on
either controller to select the desired letter or
digit. Next, press the right button on either con-
troller and select another letter or digit. Repeat
this process to select a third letter or digit. Then,
press the right button on either controller again.
The display will then show the four highest scores
recorded since the scores were reset.
To select the Calorie Destroyer game, press the
Fitness Games button repeatedly until the word
DESTROYER appears at the top of the display.
Pedal to start the game.
3
When you start the Calorie Destroyer game, a
game arena will appear in the display. Three rows
of drones will begin to move across the top of the
arena, periodically firing their lasers downward.
Each time the drones reach the left or right side
of the arena, they will reverse direction and move
downward.
Follow your progress with the display.
4
5
While you exercise and play the Calorie Destroyer
game, the upper left corner of the display will
show the elapsed time. In addition, the display will
show the game level that you have reached and
your current score.
To pause the game, press the Display button. To
resume the game, press the Display button
repeatedly until the word DESTROYER appears at
the top of the display, and then begin pedaling.
At the bottom of the arena is a laser blaster. You
can fire the laser blaster at the drones by press-
ing the up button on either controller. In addition,
while you are pedaling, you can move the laser
blaster to the left or right using the left and right
buttons on either controller. The faster you pedal,
the faster the laser blaster will move.
When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO PLAY THE BLACKJACK GAME
Blackjack is a casino-style card game in which you
compete against the dealer to win credits. Your goal
during each hand of the game is to have the highest
point total that does not exceed 21 points. You will use
the interactive touch screen on the display to play the
game. Follow the steps below to play Blackjack.
Note: For detailed instructions on how to play
Blackjack, consult a card game rule book or other
card game resource.
Begin pedaling or press any button on the
1
console to turn on the console.
Count the point total of your cards and tap the
screen to select a game option. You can choose
to HIT, STAND, or DOUBLE. Repeat this action
as necessary until the hand ends.
A moment after you begin pedaling or press a
button, the display will light.
Select the Blackjack game.
When the hand ends, the result and the point
totals for you and the dealer will appear in a box
on the right side of the display. To continue the
game, tap the center of the screen.
2
To select the Blackjack game, press the Fitness
Games button repeatedly until the word
BLACKJACK appears at the top of the display.
The game will continue in this way indefinitely or
until you have no credits available to bet. If you
have no credits to bet, the words GAME OVER
and the game time will appear in the display. To
play Blackjack again, tap the prompt box on the
screen. To exit the game at any time, press the
Fitness Games button.
Tap the screen to start the game.
3
As you pedal, tap the screen to begin the
Blackjack game. After a moment, the words
PLACE YOUR BET will appear in the display. Tap
the screen to select the amount you want to bet
on this hand. Note: You begin each game with
500 credits. As you win or lose credits during the
game, your current total will be shown in the
upper right corner of the display.
Follow your progress with the display.
4
5
While you pedal and play the Blackjack game, the
upper left corner of the display will show the
elapsed time. To view additional exercise informa-
tion, press the Display button repeatedly.
After you place a bet, a representation of a game
table will appear in the display. The dealer’s cards
will appear in the upper left corner of the display.
Your cards will appear in the lower left corner of
the display. The game options will appear in three
boxes on the right side of the display.
When you are finished exercising, the console
will turn off automatically.
See step 6 on page 13.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
information is located in the lower right corner of
the display. The black X in the display indicates
the location of the dealer button. The black arrow
indicates which player’s turn it is.
HOW TO PLAY THE TEXAS HOLD ‘EM GAME
Texas Hold ‘Em is a popular poker game in which you
compete against other players to win credits. Your
objective is to form the best five-card poker hand from
your two hole cards and the five community cards
shared by all the players. You will use the interactive
touch screen on the display to play the game. Follow
the steps below to play Texas Hold ‘Em.
When it is your turn, assess your cards and tap
the C/R/F game option box to make a betting
decision; you can choose to CALL, RAISE, or
FOLD. You can also tap the CARDS box to view
your cards and any community cards on the table
before making a decision. Note: In some circum-
stances, you can choose to CHECK instead of
CALL.
Note: For detailed instructions on how to play
Texas Hold ‘Em, consult a card game rule book or
other card game resource.
If you decide to RAISE, tap the upward and
downward arrow boxes to select the desired num-
ber of credits, and then tap the OK box.
Begin pedaling or press any button on the
1
console to turn on the console.
A moment after you begin pedaling or press a
button, the display will light.
After you make your betting decision, play will
continue with the other players. Continue to make
betting decisions throughout the betting rounds
and the deals. When the flop is dealt, three cards
will appear in the upper left area of the display.
Additional cards will appear in this area when the
turn and river are dealt. Assess these cards and
make betting decisions as before. During the
game, the other players may fold, bust, or contin-
ue to a showdown.
Select the Texas Hold ‘Em game.
2
To select the Texas Hold ‘Em game, press the
Fitness Games button repeatedly until the words
TEXAS HOLD ‘EM appear at the top of the dis-
play.
Tap the screen to start the game.
3
The player with the best five-card hand in any
combination of hole and community cards will win
the showdown.
As you pedal, tap the screen to begin the Texas
Hold ‘Em game. After you start the game, a repre-
sentation of a game table will appear in the dis-
play. Your hole cards will be shown in the lower
left corner of the display. The number of credits in
the pot will be shown in the black box in the cen-
ter of the display. The amount bet by each player
will be shown along the right side of the display. A
game option box will be shown below the pot.
After the showdown, the word WINS: will appear
in the center of the display. The number of credits
won by each player will be shown along the right
side of the display. To view the cards held by the
other players, tap the number of credits won by
each player.
The game will continue in this way until you win
all the other players’ credits or until you have no
credits available to bet. To exit the game at any
time, press the Fitness Games button.
Follow your progress with the display.
4
5
While you pedal and play the Texas Hold ‘Em
game, the upper left corner of the display will
show the elapsed time. To view additional exercise
information, press the Display button repeatedly.
When you are finished exercising, the console
will turn off automatically.
During the game, player information will appear
along the right side of the display. Your player
See step 6 on page 13.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and properly tighten all parts of the exercise
cycle regularly. The exercise cycle can be cleaned
with a soft, damp cloth. To prevent damage to the
console, keep liquids away from the console and keep
the console out of direct sunlight.
HOW TO ADJUST THE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest setting, the
belt may need to be adjusted. To adjust the belt, the
pedals and side shields must first be removed. Using
an adjustable wrench, turn the right pedal counter-
clockwise and remove it. Then, turn the left pedal
counterclockwise and remove it. Remove the screws
from the right side shield, and then carefully remove
the side shields.
TIGHTENING THE PEDALS
For best performance, regularly tighten both pedals.
CONSOLE TROUBLESHOOTING
If the console display becomes dim, the batteries
should be replaced. See assembly step 6 on page 7
for replacement instructions. If the console does not
display your heart rate when you use the handgrip
pulse sensor, see step 5 on page 13.
Loosen, but do
not remove, the
three indicated
screws (A).
Insert the shaft
of a screwdriver
HOW TO LEVEL THE EXERCISE CYCLE
downward
28
between the
If the exercise cycle
does not sit flat on
your floor, turn one
or both of the level-
ing feet under the
rear stabilizer until
Pulley (22) and
the idler (B). Pull
the top of the
screwdriver
22
B
A
toward the rear
of the exercise
cycle until the
Leveling
the exercise cycle is
Feet
level.
Belt (28) is tight. Then, tighten the three screws.
Reattach the side shields, and then reattach the ped-
als. To attach the pedals, turn the right pedal clock-
wise and turn the left pedal counterclockwise.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
WARNING:
Before beginning this or any exercise pro-
gram, consult your physician. This is espe-
cially important for individuals over the age
of 35 or individuals withpre-existing health
problems.
Fat Burning
To burn fat effectively, you must exercise at a relative-
ly low intensity level for a sustained period of time.
During the first few minutes of exercise, your body
uses easily accessible carbohydrate calories for ener-
gy. Only after the first few minutes of exercise does
your body begin to use stored fat calories for energy. If
your goal is to burn fat, adjust the intensity of your
exercise until your heart rate is near the lowest num-
ber or the middle number in your training zone as you
exercise.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be “aerobic.” Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the highest number in your training zone.
The following guidelines will help you to plan your
exercise program. Remember that proper nutrition and
adequate rest are essential for successful results.
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the
desired results is to exercise with the proper intensity.
The proper intensity level can be found by using your
heart rate as a guide. The chart below shows recom-
mended heart rates for fat burning, maximum fat burn-
ing, and cardiovascular (aerobic) exercise.
WORKOUT GUIDELINES
Each workout should include the following three parts:
A warm-up, consisting of 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa-
ration for exercise.
Training zone exercise, consisting of 20 to 30 min-
utes of exercising with your heart rate in your training
zone. (During the first few weeks of your exercise pro-
gram, do not keep your heart rate in your training
zone for longer than 20 minutes.)
A cool-down, with 5 to 10 minutes of stretching. This
will increase the flexibility of your muscles and will
help to prevent post-exercise problems.
To find the proper heart rate for you, first find your age
at the bottom of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers above
your age; the three numbers are your “training zone.”
The lowest number is the recommended heart rate for
fat burning; the middle number is the recommended
heart rate for maximum fat burning; and the highest
number is the heart rate for aerobic exercise.
EXERCISE FREQUENCY
To maintain or improve your condition, plan three work-
outs each week, with at least one day of rest between
workouts. After a few months of regular exercise, you
may complete up to five workouts each week, if
desired. The key to success is make exercise a regu-
lar and enjoyable part of your everyday life.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
1
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, backs of
knees, and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back, and groin.
3
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward, and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons, and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Quadriceps and hip
muscles.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. PFEX44177.0
R1206A
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
1
1
1
2
1
2
1
1
1
2
1
1
2
1
1
1
2
1
1
4
1
2
1
1
2
2
1
1
2
1
Frame
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
#
1
2
1
1
1
1
1
4
1
1
2
3
2
4
2
1
1
4
8
1
1
4
4
17
1
2
2
4
3
2
1
1
2
4
Pillow Block
2
Front Stabilizer
Rear Stabilizer
Left Side Shield
Right Side Shield
Handlebar Post
Handlebar
M10 Curved Washer
Right Pedal/Strap
Crank Washer
3
4
5
Flywheel
6
Left Pedal/Strap
7
Resistance Motor
Stabilizer Endcap
Idler Arm Assembly
Clamp
8
Pedal Guard
Console
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Game Controller
Seat Post
5/16" x 1" Flange Screw
M10 x 50mm Button Screw
M10 x 60mm Button Bolt
M10 Nylon Locknut
M4 x 10mm Screw
Reed Switch/Wire
Lower Wire Harness
M6 x 16mm Screw
M6 Nylon Locknut
Left Controller Wire
Upper Wire Harness
M10 x 85mm Button Screw
M8 Nylon Locknut
M4 x 16mm Screw
M4 x 5mm Screw
M6 x 10mm Screw
Black M10 Curved Washer
M8 Split Washer
Seat
Collar
Side Shield Cover
Left Crank Arm
Right Crank Arm
Wheel
Water Bottle Holder
Seat Carriage
Seat Post Knob
Crank Bearing
Idler Pulley
Magnet
M6 Split Washer
Split Wire Harness
Crank Cover
Crank
Belt
Leveling Foot
Grip
M10 Split Washer
Black M10 x 50mm Button Screw
Right Controller Wire
User’s Manual
Seat Knob
Crank Snap Ring
M4 x 19mm Screw
Pulley
#
Hex Key
#
Cable Tie Holder
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. PFEX44177.0
R1206A
37
16
9
37
10
30
48
58
5
26
45
36
58
49
58
14
58
8
58
65
7
10
54
49
30
58
58
25
6
18
63
33
61
60
53
12
31
63
64
11
13
23
27
19
62
46
46
20
52
63
62
34
55
58
44
38
42
57
50
47
21
17
53
22
59
1
17
47
24
41
48
24
2
43
42
56
21
39
35
29
32
42
58
29
3
58
58
56
40
45
26
42
58
28
4
51
8
15
14
58
40
23
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information:
• the MODEL NUMBER of the product (PFEX44177.0)
• the NAME of the product (PROFORM 450 UR exercise cycle)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST on page 22)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur-
chase. There is a lifetime warranty on the frame. This warranty extends only to the original purchaser.
ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product
through one of its authorized service centers. All repairs for which warranty claims are made must be pre-
authorized by ICON. If the product is shipped to a service center, freight charges to and from the service
center will be the customer’s responsibility. For in-home service, the customer will be responsible for a
minimal trip charge. This warranty does not extend to any product or damage to a product caused by or
attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an
ICON authorized service center; products used for commercial or rental purposes; or products used as
store display models. No other warranty beyond that specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con-
nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of inci-
dental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 247709 R1206A
Printed in China © 2006 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|