Princess Household Appliances BV CRT Television 68CT8 User Manual |
OWNER'S MANUAL
68CM CORDLESS REMOTE COLOUR TELEVISION
MODEL: 68CT8
Type Tested
Electrical
Safety
AS/NZS 3250 Lic 4166
Standards Australia
APP No: N15899
N.G ENTERPRISES PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
N.G. ENTERPRISES PTY LTD
TELEPHONE
AUSTRALIA: 1300 657 888
Download from Www.Somanuals.com. All Manuals Search And Download.
Main features
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Hyperband
Automatic channel preset
Full function remote control
200 preset channels
2
Intellectualized I C-bus control
AV input/output (RCA) jacks
DVD input jacks
Selectable picture
ON timer/OFF timer/Sleep timer
Channel scan
Channel edit
Child lock
Hotel lock
Game
Calendar
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety precautions
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Front
Power Switch
TV/AV
Remote sensor
Channel up/down
MENU
Volume up/down
Back
AV2 input
(VIDEO, AUDIO: L/MONO, R)
DVD input
(VIDEO; Y,Cb,Cr,
AUDIO; L/MONO, R)
AV output
(VIDEO, AUDIO; L, R)
AV1 input (VIDEO,
AUDIO; L/MONO, R)
Antenna input
S-VIDEO input
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Identification of Controls
Remote control
TV/AV
TV/VIDEO input select
Power on/Standby
GAME
ZOOM
CALL
Game playing
3
6
9
1
4
7
0
2
5
8
Picture zoom
Direct channel select
Digit select
Recall on-screen display
MUTE
Sound mute
Return to previous channel
Sleep timer
SCAN
Program scan
Picture mode select
MUSIC
Lock setting
Enter into music mode
Access picture menu
Select higher program
Volume down
Volume up
Open the menu
Select lower program
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connection
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be
used. The exact type and position of the aerial will depend upon your particular area.
TV REAR
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which
may occur due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on
the picture screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable
viewing.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
External equipment connections
The following describes how to use and connect the TV with other AV equipment (for example, VTR, Video
Camera, DVD, Video game, etc.) Please refer to the owner's manual of the equipment to be connected as
well.
To connect AV input terminals
Connect side AV inputs
Y
W
R
Yellow (video)
TV SET SIDE
To access the unit connected
to these jacks, press TV/AV
button until AV2 appears on
the screen.
R
White (audio L/MONO)
Red (audio R)
W
Y
Video game
W
R
Y
Signal
To video
outputs
To audio
outputs
Connect rear AV inputs
If your video equipment has a S-VIDEO output terminal, connect it to the S-VIDEO input terminal on the
unit. If not, connect it to the VIDEO terminal (RCA ).
The S-VIDEO and AV1 use the same group of audio input terminals.
VTR without
VTR without
S-VIDEO terminal
S-VIDEO terminal
Y
: Yellow (video)
W
: White (audio L/MONO)
R : Red (audio R)
W
R
Y
W
R To audio
outputs
To S-VIDEO
output terminal
To audio
outputs
To video
output
TV SET REAR
Y
W
R
W
R
To access the unit connected to these jacks, press TV/AV button until AV1 or SVHS appears on the screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
External equipment connections
To connect DVD input terminals
The figure below shows how to connect the DVD input terminals of the TV set to the DVD Player, Laser Disk
Player, etc.
The TV set rear
DVD Player,
Laser Disk Player etc.
:Direction of the signal
W
:White (audio L/MONO)
R
:Red (audio R, CR)
:Green (Y)
G
B :Blue (CB)
CB
Y
CR
R
L
Signals
To access the unit connected to these jacks, press TV/AV button until YUV appears on the screen.
Notes:
1. Both the CR terminal and the audio R terminal are red for easy identification. Make sure they are
correctly connected.
2. DVD and AV1 use the same group of audio input terminals.
To connect the AV Outputs
You can connect an audio system to the AV output jacks on the TV set rear to enjoy a high-quality sound
from the audio system, or you can connect the AV output jacks to the VTR to record the program you like.
The TV set rear
To external input
Signal
Audio System
Yellow (video)
white (audio L)
red (audio R)
Y
W
R
Another VTR for
recording
To video input
To audio inputs
Y
W
R
Y
W
R
Signal
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Power on/off
Turning on
Press the Power Switch on the TV set.
1
2
TV/AV
GAME
If no picture appears on the screen and the standby
indicator lights up, the TV set is in STANDBY mode.
Now please follow step 2.
3
6
9
1
4
7
0
2
5
8
ZOOM
CALL
In STANDBY mode, press standby (
on the remote controller and the TV set is turned
on.
) button
MUTE
In STANDBY mode, you can also press Channel up/down
button on the set to turn on the set.
SCAN
MUSIC
Turning off
Press the Power Switch on the TV set if you
want to cut off the power completely.
1
2
If you want to turn off the TV set temporarily,
press the
button.
Special indication:
Auto-Power-Off function: there are three kinds of Auto-
Power-Off function:
1. If a vacant channel is tuned or TV broadcast for a day is
finished, the TV will automatically turn off after a period
of time.
2. Sleep-timer function
3. OFF timer function.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting input signal
Watching AV program
This TV set provides AV input terminals for your
convenient connection to VCR, DVD or other video
equipment.
TV/AV
GAME
TV/AV
To watch video program from AV inputs, press
TV/AV button repeatedly until you see the
appropriate input indicator on the screen.
3
6
9
1
4
7
0
2
5
8
1
ZOOM
CALL
12
AV1
AV2
SVHS
YUV
MUTE
NOTE:
SCAN
AV1: Select AV1 when viewing the signals from the video
equipment connected to the AV 1 IN terminals.
MUSIC
AV2: Select AV2 when viewing the signals from the video
equipment connected to the AV 2 IN terminals.
SVHS: Select SVHS when viewing the signals from the
video equipment connected to the S-VIDEO IN terminals.
YUV: Select YUV when viewing the signals from the
video equipment connected to the YUV IN terminals.
Switching from AV to TV
When the TV set is in AV mode, you can do the following to
switch back to TV mode.
Press TV/AV button repeatedly until the TV
program appears.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in
There are two ways to preset channels: to preset channels automatically and to preset channels manually.
Below we will describe how to preset the channels by making use of the menu.
Auto Search
Use the Auto Search function to preset all the active channels in
TV/AV
your local area automatically.
GAME
Press MENU repeatedly to
3
6
9
1
4
7
0
2
5
8
1 display Preset menu.
ZOOM
CALL
Preset
Note: if LOCK is set to ON in LOCK
menu, the Preset menu can not be
entered. How to setup or change
lock, please refer to page 22 for
details.
PROGRAM
AUTO STORE
SEARCH
1
CALL
FINE TUNING
PROG EDIT
SKIP
MUTE
ON
Press P+ or P- to select AUTO
2
STORE. Press V+ to enter into the
sub-menu.
SCAN
Preset
* AUTO STORE *
PROGRAM
COLOR SYSTEM AUTO
SOUND SYSTEM
START
Press P+ or P- to select PROGRAM.
3
MUSIC
1
Press V+ or V- to select an initial
B/G
channel number from which you
want to store (for example, program
1).
Press P- to select COLOR SYSTEM
4 menu item, press V+ or V- to select
Menu
control buttons
a proper colour system (normally
please select AUTO).
AUTO STORE
PROGRAM
VHF-L
13
49
Press P- to select SOUND SYSTEM
5
menu item, press V+ or V- to select
your local area's sound system.
Press P- to select START menu
6 item, press V+ to start auto search.
All active channels will be preset and stored into the
memory automatically.
After auto search, the set will return to the initial channel.
During the process of Auto Search, pressing MENU
will stop the process.
Note:
* To exit the menu, press CALL button or
Since this model's colour system and sound
system have been preset properly in factory,
therefore there is no need to set the colour/sound
system before auto search, the above steps 4
and 5 may be skipped.
repeatedly press MENU button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in
If Auto Search can not preset the desired channels, or you want to preset the desired channels one by
one with the preferred channel numbers, please make use of SEARCH.
Manual Search
TV/AV
Preset
PROGRAM
AUTO STORE
SEARCH
Press MENU repeatedly to display
1 Preset menu.
4
GAME
3
6
9
1
4
7
0
2
5
8
FINE TUNING
PROG EDIT
SKIP
Press P+ or P- to select SEARCH,
ZOOM
CALL
2 press V+ to enter into the sub-menu.
ON
CALL
In SEARCH sub-menu, press P+ or
3 P- to select PROGRAM. Press V+
Preset
MUTE
* SEARCH *
PROGRAM
COLOR SYSTEM AUTO
SOUND SYSTEM
BAND
or V- to select a channel number
at which you want to store (for
example, program 6).
6
B/G
VHF-L
SEARCH
SCAN
In SEARCH sub-menu, press P- to
4 select SEARCH menu item, press
MUSIC
V+ or V- to perform searching.
Press and hold V- to search
towards lower frequency.
Press and hold V+ to search
towards higher frequency.
SEARCH
PROGRAM
VHF-L
6
36
Menu
control buttons
When a channel is located, the searching stops, this
channel is then memorised with the preset program
number.
If the searched channel is abnormal
Preset
5 in colour, maybe the colour system
* SEARCH *
PROGRAM
COLOR SYSTEM AUTO
SOUND SYSTEM
BAND
setting is wrong, you may try to
6
change the colour system. In
SEARCH sub-menu, press P- to
select COLOR SYSTEM menu
item, press V+ or V- to select a
proper colour system.
B/G
VHF-L
SEARCH
If the searched channel is abnormal
6 in sound, maybe the sound system
Preset
* SEARCH *
PROGRAM
COLOR SYSTEM AUTO
SOUND SYSTEM
BAND
SEARCH
setting is wrong you may try to
change the sound system. In
SEARCH sub-menu press P- to
select SOUND SYSTEM menu
item, press V+ or V- to select a
proper sound system.
6
B/G
VHF-L
* To exit the menu, press CALL button or
repeatedly press MENU button.
Notes:
1. In manual search, you can also use Band selection to quicken searching process if you know which band
your desired program locates in. The band switches among VHF-L, VHF-H and UHF.
2. Repeat the above steps if you want to store another program in other program number.
3. In some model there is only with one sound system, in this case there is no need to set sound system.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning in
To skip unnecessary channel
After presetting the channels, you can skip unnecessary
channels so that only the channels you want to watch are
selected with Program up/down buttons.
TV/AV
GAME
Select the unwanted channel with digit buttons.
1
Direct channel
select buttons
3
6
9
1
4
7
0
2
5
8
Preset
PROGRAM
AUTO STORE
SEARCH
Or enter into Preset menu, press
P- or P+ to select PROGRAM,
press V- or V+ to select the
unwanted channel.
ZOOM
CALL
4
FINE TUNING
CALL
PROG EDIT
SKIP
ON
MUTE
Press P- or P+ to select SKIP,
press V- or V+ to select SKIP ON.
2
Thus, after exiting the menu, the channel will then be skipped
when you select programs with the Program up/down button.
SCAN
MUSIC
If you want to skip other unwanted channels, repeat the
above steps.
Note: you can select the skipped channel by pressing the
direct channel select buttons.
To restore a skipped channel
Menu
control buttons
Enter into Preset menu, select the program number you want
to restore. Press P- or P+ to select SKIP, press V- or V+ to
select SKIP OFF.
Manual Fine Tuning
Fine tuning is not necessary under normal conditions. However,
in area of inferior broadcast conditions where adjustment is
necessary for a better picture and sound, use Fine tuning.
Select the channel you want to fine-tune.
1
Preset
PROGRAM
AUTO STORE
SEARCH
FINE TUNING
PROG EDIT
SKIP
1
Enter into Preset menu, press P-
2 or P+ to select FlNE TUNING,
then press V+ to enter into the
sub-menu.
ON
* To exit the menu, press CALL button or
repeatedly press MENU button.
In FlNE TUNING sub-menu,
Preset
3 press P- or P+ to select TUNING,
* FINE TUNING *
PROGRAM
then press and hold V+ or V- to
fine tune to obtain best possible
picture and sound.
2
COLOR SYSTEM AUTO
SOUND SYSTEM
TUNING
B/G
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel selection
You can select your desired TV program by one of the
following methods.
Use Direct Channel Select buttons
TV/AV
GAME
To select one-digit channel:
Press 0-9 button directly.
Direct channel
select buttons
3
6
9
1
4
7
0
2
5
8
Press 0-9
ZOOM
CALL
button
5
CALL
MUTE
To select two-digit channel:
Press -/-- button to display "--" then input the number.
Press
0-9 buttons
Press
"-/--" buttons
Press
0-9 buttons
SCAN
- -
5-
56
MUSIC
To select three-digit channel:
Press -/-- button to display "1--", then input the number.
P+
P-
1--
15-
156
Press
0-9 button
Press
-/-- button
Press
0-9 button
* In this model the maximum channel number is 199.
Use Program up/down buttons
Press P+ button, the channel number increases;
Press P- button, the channel number decreases.
Use Previous program button
Press
button to switch between the current program
and the previous one.
Notes:
Use CALL button to know the current channel
number.
Press CALL button to display the
current TV state. If in TV program
viewing, then it will display the
current channel number, colour
12
AUTO
B/G
system, sound system and audio
60
mode. If you have set sleep timer,
the remaining time will also be
displayed.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel edit
You can edit the channel programs in your favourite order.
Channel edit
Preset
PROGRAM
AUTO STORE
SEARCH
Press MENU repeatedly to
1 display Preset menu.
4
TV/AV
GAME
FINE TUNING
PROG EDIT
SKIP
Press P+ or P- to select PROG
3
6
9
1
4
7
0
2
5
8
2 EDIT.
ON
ZOOM
CALL
Press V+ to enter into EDIT
PROG sub-menu.
3
CALL
Preset
MUTE
* EDIT PROG *
PROGRAM
TO
4
10
Select PROGRAM item.
Press V+ or V- to select a program
number which you want to swap.
4
SWAP
SCAN
MUSIC
Select TO item, press V+ or V- to select a program
5 number which you want to swap to.
Highlight SWAP and press V+ to confirm.
6 Now these two programs' contents are swapped.
Menu
control buttons
Repeat the above steps to edit the programs in your
favourite order.
* To exit the menu, press CALL button or
repeatedly press MENU button.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture adjustment
To select the picture mode
You can select the picture quality
instantly among three preset
modes and one user-set mode.
MILD
DYNAMIC
STANDARD
USER
TV/AV
GAME
3
6
9
1
4
7
0
2
5
8
Press
button to select the
ZOOM
CALL
desired picture quality. MILD,
DYNAMIC, STANDARD and
USER (user-set) can be selected
cyclically.
CALL
MUTE
Mode
MILD
Picture quality
Display soft pictures
Display dynamic pictures
Display normal pictures
The picture quality you set
DYNAMIC
STANDARD
USER
SCAN
MUSIC
Picture adjustment
Press MENU button to display
Picture
1the Picture menu.
BRIGHT
CONTRAST
COLOR
14
25
50
41
0
Menu
control buttons
SHARPNESS
TINT
Press P+ or P- to select item.
2
WHITE TONE NORMAL
Press V+ or V- to adjust the level.
3
You can also press
button to call up the Picture menu.
Item
BRIGHT
CONTRAST
COLOR
SHARPNESS
*TINT
V-
V+
lighter
stronger
deeper
sharper
greenish
darker
weaker
paler
softer
purplish
WHITE TONE
NORMAL/COOL/WARM
Notes:
* To exit the menu, press CALL button or
repeatedly press MENU button.
Tint is only for NTSC system.
The adjustment level is stored in the USER position.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound controls
Adjusting volume
Use Volume up/down button
1
Press V- button, the volume
decreases;
TV/AV
GAME
Press V+ button, the volume
increases.
VOLUME
MUTE
52
3
6
9
1
4
7
0
2
5
8
ZOOM
CALL
Use MUTE button
2
If you want to mute the sound,
press MUTE button on the
MUTE
remote.
MUTE
To resume the sound, press this button again.
SCAN
MUSIC
Making use of Sound menu
Press MENU repeatedly to display Sound menu.
1
V-
Sound
Press P+ or P- to select
VOLUME
40
ON
2 desired adjusting item.
V+
AVL
Menu
control buttons
Press V+/- to adjust the
3 level.
V-
weaker
V+
stronger
Item
Volume
*AVL
ON/OFF
* AVL: auto volume limit.
Each broadcasting station has its own signal conditions,
which can make it necessary to adjust the volume every time
the channel is changed. Turning "AVL" On lets' you
automatically adjust the volume of the desired channel
by lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer setting
Setting clock time
Making use of this function can set the current time for the TV.
Time
TV/AV
GAME
Press MENU repeatedly to
display the Time menu.
CLOCK
12:00
- -:- -
- -:- -
0
1
OFF TIME
ON TIME
PROGRAM
3
6
9
1
4
7
0
2
5
8
Press P- or P+ to select CLOCK.
ZOOM
CALL
2
3
Press V- to set the hour (0-23), press V+ to set the minute
CALL
(00-59).
MUTE
Note:
Before setting the OFF timer and ON timer, please set the
CLOCK item first.
SCAN
MUSIC
Setting OFF timer
With the OFF timer, the TV will automatically switch to standby
mode at a preset time.
In Time menu, press P- or P+ to
select OFF TIME.
Time
1
CLOCK
12:05
13:50
- -:- -
0
OFF TIME
ON TIME
PROGRAM
Menu
control buttons
Press V- to set the hour (0-23),
press V+ to set the minute (00-
59).
2
Once the preset time has elapsed, the TV will automatically
go into standby mode.
* To exit the menu, press CALL button or
repeatedly press MENU button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer setting
Setting ON timer/ON program
With the ON timer, the TV will automatically turn on to a preset
channel at a preset time.
Time
In Time menu, press P- or P+ to
CLOCK
12:09
13:50
18:10
4
TV/AV
GAME
1select ON TIME.
OFF TIME
ON TIME
PROGRAM
Press V- to set the hour (0-23),
press V+ to set the minute (00-
59).
3
6
9
1
4
7
0
2
5
8
ZOOM
CALL
Time
CLOCK
12:09
13:50
18:10
4
CALL
Press P- to select PROGRAM.
2 Press V- or V+ to set the TV ON
OFF TIME
ON TIME
PROGRAM
MUTE
program number.
button to switch the TV to standby mode.
3 Press
SCAN
At the preset time, the TV will turn on automatically to the
preset channel.
MUSIC
Setting sleep timer
Menu
control buttons
Making use of the Sleep timer function allows you to have the
set automatically turn off after a preset time, and bring the TV
to standby mode.
With every press of
sequence of 0 15
150 120 135
225 240
button the sleep time changes in the
30
150
45
165
60
180
75
195
90
210
0 (minutes) ----.
For example, if you would like the TV
to auto turn off in 60 minutes, you can
press
button repeatedly until the
screen displays the desired amount of
time. If you want to cancel the sleep
60
timer, you can press
button
repeatedly until 0 displays on the
screen.
* To exit the menu, press CALL button or
repeatedly press MENU button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
System setup
Setting Blue Screen
Press MENU repeatedly to
Setup
1 display Setup menu.
BLUE SCREEN
PICTURE ENHANCE ON
CALENDAR
ON
TV/AV
GAME
Press P- or P+ to select BLUE
3
6
9
2 SCREEN.
1
4
7
0
2
5
8
ZOOM
CALL
Press V+ or V- to turn on/off BLUE SCREEN.
3
CALL
If the BLUE SCREEN is turned on, the TV will appear a
blue screen when there is no input signal.
MUTE
SCAN
Setting Picture Enhance
MUSIC
Setup
Enter into Setup menu.
1
BLUE SCREEN
ON
PICTURE ENHANCE ON
CALENDAR
Press P- or P+ to select
2 PICTURE ENHANCE.
Press V+ or V- to turn on/off
3 Picture Enhance.
Menu
control buttons
Turning on PICTURE ENHANCE can improve the picture
quality.
Calendar function
Setup
Enter into Setup menu.
BLUE SCREEN
ON
1
PICTURE ENHANCE ON
CALENDAR
Press P- or P+ to select
2 CALENDAR.
Press V+ to enter into the
3 calendar interface.
2004 FEB
* To exit the menu, press CALL button or
repeatedly press MENU button.
SU MO TU WE TH FR SA
Pressing P+ or P- can check
4 years' calendar forward or
5
7
6
3
4
1
8
2
9
12
19
26
14
21
28
13
20
27
10 11
17 18
24 25
15 16
22 23
29
backward.
Pressing V+ or V- can check
months' calendar of some year
forward or backward.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setting
The Child Lock function blocks the viewing of any channel for
which the child lock has been set.
To use the Child Lock function, you first need to set your
password.
TV/AV
GAME
3
6
9
1
4
7
0
2
5
8
To set a password
ZOOM
CALL
To enter into LOCK menu, press
button. Now a password is
required to input.
Digit buttons
1
LOCK
PIN *** -
MUTE
Press digit buttons to input the
2 password (four-digit, the default
LOCK
LOCK
PROGRAM
CHILD LOCK
HOTEL MODE
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
OFF
10
password is 0000 and you
should change it) to enter into
Lock menu.
OFF
OFF
32
SCAN
OFF
MUSIC
Press P- to select CHANGE PIN
3 item.
Press V+ button to enter into the
CHANGE PIN
sub-menu.
NEW PIN
CONFIRM
* * * *
* *- -
Enter a new password and
4 confirm again.
Lock menu
control buttons
Now the password has been
modified successfully.
TV program child lock setup
Enter into LOCK menu. Highlight PROGRAM and use V+
1or V- to select a program you want to lock.
LOCK
LOCK
PROGRAM
CHILD LOCK
HOTEL MODE
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
Press P- or P+ button to select
2 CHILD LOCK item.
OFF
10
ON
OFF
32
Press V+ or V- button to set On.
OFF
Repeat the above steps to set
3 child lock to other TV program.
LOCK
LOCK
PROGRAM
CHILD LOCK
HOTEL MODE
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
Press P+ button to select LOCK
4 item.
ON
10
ON
OFF
32
The master password to enter into LOCK
menu is 4100. Make sure not let children
know the password.
Press V+ or V- button to set ON.
OFF
Press
button to exit the
5 menu.
Now the Child Lock function is activated, the locked channel's screen is blank and a locked icon appears
on the screen.
Important note: to enable child lock, you must both set Lock to On and Child Lock to On in Lock
menu.
To cancel child lock function, press
button and then input password to enter into LOCK menu, select
LOCK item and set it to Off (it is a general lock).
Note: if LOCK is set to On, the PRESET menu can not be entered.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Lock setting
This unit provides Hotel Lock function, you can limit sound
volume which is especially useful in hotel.
Hotel lock setup
TV/AV
GAME
Use password to enter into
1 LOCK menu.
LOCK
LOCK
ON
10
PROGRAM
CHILD LOCK
3
6
9
ON
ON
32
1
4
7
0
2
5
8
Select LOCK item and press V+
or V- button to set ON.
HOTEL MODE
2
ZOOM
CALL
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
OFF
Digit buttons
Press P- button to select HOTEL
3 MODE item.
LOCK
LOCK
PROGRAM
CHILD LOCK
HOTEL MODE
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
MUTE
OFF
10
Press V+ or V- button to set On.
ON
ON
50
Press P- button to select
4 VOLUME LIMIT item.
OFF
SCAN
Press V+ or V- button to set a
maximum volume.
MUSIC
Now Hotel Lock functions, the volume is limited.
To cancel Hotel Lock, input the correct password to enter
into Lock menu and set LOCK to OFF.
PLUG & PLAY function
Lock menu
control buttons
When you set PLUG & PLAY to ON, next time you turn on the
set by Power Switch, the set will automatically perform auto
search (please make sure that the antenna connection is OK
before you turn on). After auto search, the PLUG & PLAY will
auto be set to OFF. Below is the steps:
LOCK
LOCK
PROGRAM
CHILD LOCK
HOTEL MODE
VOLUME LIMIT
PLUG & PLAY
CHANGE PIN
Use password to enter into
ON
10
1 LOCK menu.
ON
OFF
32
ON
Press P- button to select PLUG
& PLAY item.
Press V+ or V- button to set On.
2
Note:
If LOCK is set to ON, PLUG & PLAY function does not
work.
PLUG & PLAY function is an optional function, it is only
available on certain versions and we recommend you had
better not use it.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Other functions
ZOOM function
Making use of zoom function can change the screen's vertical
size.
TV/AV
GAME
Press ZOOM button repeatedly, ZOOM, 16: 9 and 4:3 can be
selected cyclically. You can select one of them according to
actual need, for example, to view wide screen movie VCD.
GAME
ZOOM
3
6
9
1
4
7
0
2
5
8
ZOOM
CALL
Zoom
16:9
4:3
MUTE
To scan programs
SCAN
Press SCAN button, the TV set will scan the channels from
current channel to higher channels one by one, every program
will be displayed for about two seconds and then go on
scanning.
SCAN
MUSIC
MUSIC
Press SCAN button again to stop.
Music TV function
Press MUSIC button to enter into
MUSIC MODE. In this mode, the
screen is blank while the sound is
normal. You can make use of this
function to reduce eyestrain while the
sound still can be listened. Press
MUSIC button again to exit the mode.
MUSIC MODE
Playing game
This TV set provides a built-in game (BOXMAN) for you to play.
Press GAME button and BOXMAN game playing interface
will appear.
1
In boxman mode, the box should be moved to specific
place.
2
Press P+ or P- to move the box upward or downward.
Press V+ or V- to move the box rightward or leftward.
Press [1] digit button to select previous stage of game.
Press [2] digit button to select next stage of game.
Press CALL button to exit.
Press MENU button to restart.
The player should control the man to push the box to the
3 destinations within the wall by using P+/P-/V+/V- buttons.
When you push all boxes to the relevant destinations then
you win the game.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the trouble you are
experiencing.
Symptoms
Check the following items
Be sure the power cord is plugged in.
Power is not turned on.
Poor colour poor tint.
Contrast, colour tint are not correctly adjusted
Possible interferences of automobiles, motorcycle,
trolley bus, neon lamps, etc.
Spots appear on the screen.
Stripes appear on the screen.
Possible interference of electronic interference
from another TV set, a computer, an electronics
game machine, a broadcast station, etc.
This may be caused by reflections from nearby
mountains or buildings.
Check the antenna direction.
Double images or "ghosts".
Snowy picture.
It is possible that the aerial "lead-in" is damaged or
comes off.
Check the antenna direction.
Check sound volume levels.
No Sound, Picture is OK.
Make sure the TV is not muted.
Preset menu can not be
entered.
When LOCK is set to ON, the Preset menu can not
be entered. You may use password to enter into
Lock menu to set LOCK to OFF.
Volume is limited.
TV cabinet creaks.
The set is in Hotel Lock On mode. Use password
to enter into Lock menu and set LOCK to OFF.
Even if the picture or the sound is normal, changes
in the room temperature sometimes make the TV
cabinet expand or contract, making a noise. This
does not indicate a malfunction.
Remote controller does
not work.
The batteries may be worn out.
The batteries may be installed with their polarity
reversed.
When the set is switched on, do not shift or move
the set around. Sometimes it may develop an
unevenness in colour in some parts of the screen.
This can be eliminated by switching off the set with
the POWER switch and wait for 30 minutes before
switching on again.
Unevenness in colour in
some parts of the screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Guide
Reception disturbances
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.
Outdoor antennas are recommended for best results if not using cable. The most common types of
television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV
system, the disturbance may be caused by the local cable company broadcast.
IGNITION:
Black spots or horizontal streaks may appear, picture, may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electric drills and other electric appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or other
objects. Changing the direction or position of the antenna may improve the
reception.
SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small dots.
When the signal is extremely weak, it maybe necessary to install an
external antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
This interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:
A slight picture size variation is quite normal when you adjust the
CONTRAST or BRIGHTNESS setting.
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the
receiver may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping
the plastic parts. Mild soap and a soft, damp cloth may be used.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power Supply:
Power Consumption:
Dimensions (mm):
Weight (kg):
AC 240V, 50Hz
150W (Max.)
760 (W) x 595 (H) x 490 (D)
43
CRT:
68cm
TV system & channel range
CATV
VHF
2-12
UHF
System
X~Z+2, S1~S41
21-69
PAL-B/G
Colour System:
Sound output:
Accessories:
PAL-BG, NTSC (AV)
4W + 4W
Remote control x 1
Note: Design and specifications are subject to change without notice.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
N.G. ENTERPRISES PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
N.G. ENTERPRISES PTY LTD
TELEPHONE
AUSTRALIA: 1300 657 888
604-TK21263-00
Download from Www.Somanuals.com. All Manuals Search And Download.
|