WRANGLER
Download from Www.Somanuals.com. All Manuals Search And Download.
C O N T E N T S
I.
INTRODUCTION .............................................................................................4
II. SAFETY ...............................................................................................................5
III. YOUR PMV ........................................................................................................19
IV. BATTERIES AND CHARGING .................................................................23
V. OPERATION ....................................................................................................28
VI. COMFORT ADJUSTMENTS .....................................................................30
VII. DISASSEMBLY AND ASSEMBLY ..........................................................33
VIII. BASIC TROUBLESHOOTING ..................................................................34
IX. CARE AND MAINTENANCE ...................................................................35
APPENDIX I – SPECIFICATIONS ......................................................................38
Wrangler
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I . I N T R O D U C T I O N
SAFETY
Welcome to Pride Mobility Products Corporation (Pride). The Personal Mobility Vehicle (PMV) you have
purchased combines state-of the-art components with safety, comfort, and styling in mind. We are confi-
dent the design features will provide you with the conveniences you expect during your daily activities.
Understanding how to safely operate and care for this PMV should bring you years of trouble-free opera-
tion and service.
Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature
before attempting to operate this product for the first time. In addition, your safety depends upon you, as
well as your provider, caretaker, or healthcare professional in using good judgement.
If there is any information in this manual which you do not understand, or if you require additional assis-
tance for setup or operation, please contact your authorized Pride Provider. Failure to follow the instruc-
tions, warnings, and notes in this manual and those located on your PMV can result in personal
injury or product damage and will void Pride’s product warranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter, or modify this product
or remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,
refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the
safe use of this product.
SHIPPING AND DELIVERY
Before using your PMV, make sure your delivery is complete as some components may be individually
packaged. If you do not receive a complete delivery, please contact your authorized Pride Provider imme-
diately. Where damage has occurred during transport, either to the packaging or content, please contact
the delivery company responsible.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual. We would also like to hear
about the safety and reliability of your new PMV, and about the service you received from your authorized
Pride Provider. Please notify us of any change of address, so we can keep you apprised of important
information about safety, new products, and new options that can increase your ability to use and enjoy
your PMV. Please feel free to contact us at the address below:
USA:
Canada:
Pride Mobility Products Corporation
Attn.: Customer Care Department
182 Susquehanna Avenue
Exeter, PA 18643-2694
1-800-424-8205
Pride Mobility Products Company
380 Vansickle Road Unit 350
St. Catharines, Ontario L2R 6P7
1-888-570-1113
NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact
us and we will be glad to send you a new one immediately.
Wrangler
4
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
PRODUCT SAFETY SYMBOLS
The symbols below are used on the PMV to identify warnings, mandatory actions, and prohibited actions.
It is very important for you to read and understand them completely.
Pinch/Crush points created during assembly.
Corrosive chemicals contained in battery.
EMI-RFI- This product has been tested and passed at an immunity level of 20 V/m.
Do not lift the mobility vehicle while seated in it.
Do not lift the mobility vehicle while seated in it.
Explosive conditions exist!
Read and follow the information in the owner’s manual.
Wrangler
5
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Maximum seating weight.
Do not place PMV in freewheel mode on a decline.
Do not place PMV in freewheel mode on an incline.
Wear safety goggles.
Use only AGM or Gel-Cell batteries to reduce the risk of leakage or explosive
conditions.
Do not remove anti-tip wheels.
Do not use a cell phone, walkie/talkie, laptop, or other radio transmitter while
operating.
Wrangler
6
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Avoid exposure to rain, snow, ice, salt, or standing water whenever possible.
Maintain and store in a clean and dry condition.
Removal of grounding prong can create electrical hazard. If necessary, properly
install an approved 3-pronged adapter to an electrical outlet having 2-pronged
plug access.
Do not connect an extension cord to the AC/DC converter or the battery charger.
Keep tools and other metal objects away from battery terminals. Contact with
tools can cause electrical shock.
Do not allow unsupervised children to play near the PMV while the batteries are
charging.
Do not use batteries with different amp-hour (Ah) capacities. Do not mix old and
new batteries. Always replace both batteries at the same time.
Keep your hands away from the tires when driving. Be aware that loose fitting
clothing can become caught in drive tires.
Wrangler
7
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Battery charger for indoor use only.
Disposal and recycling - Contact your authorized Pride Provider for information on
proper disposal and recycling of your Pride product and its packaging.
Contains Lead.
Wrangler
8
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
GENERAL
WARNING! Do not operate your new PMV for the first time without completely reading
and understanding this owner’s manual.
Your PMV is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an
extensive variety of products to best fit the individual needs of the PMV user. Please be aware that the
final selection and purchasing decision regarding the type of PMV to be used is the responsibility of the
PMV user who is capable of making such a decision and his/her healthcare professional (i.e., medical
doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device expert has properly fitted
the PMV to the user and has assisted the prescribing healthcare professional and/or the authorized Pride
Provider in the instruction process for the use of the product.
There are certain situations, including some medical conditions, where the PMV user will need to practice
operating the PMV in the presence of a trained attendant. A trained attendant can be defined as a family
member or care professional specially trained in assisting a PMV user in various daily-living activities.
As you begin using your PMV during daily activities, you will probably encounter situations in which you
will need some practice. Simply take your time and you will soon be in full and confident control as you
maneuver through doorways, on and off lifts, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help the user become accus-
tomed to operating the PMV safely.
MODIFICATIONS
Pride has designed and engineered your PMV to provide maximum mobility and utility. A wide range of
accessories are available from your authorized Pride Provider to further customize your PMV to better
suit your needs and/or preferences. However, under no circumstances should you modify, add, remove,
or disable any feature, part, or function of your PMV.
WARNING! Do not modify your PMV in any way not authorized by Pride. Do not use
accessories if they have not been tested or approved for Pride Products.
REMOVABLE PARTS
WARNING! Do not attempt to lift or move your PMV by any of its removable parts,
including the armrests, seat, or shroud.
PRE-RIDE SAFETY CHECK
Get to know the feel of your PMV and its capabilities. Pride recommends that you perform a safety check
before each use to make sure your PMV operates smoothly and safely.
Wrangler
9
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
Perform the following inspections prior to using your PMV:
ꢀ Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated
on each tire if equipped with pneumatic tires.
ꢀ Check all electrical connections. Make sure they are tight and not corroded.
ꢀ Check all harness connections. Make sure they are secured properly.
ꢀ Check the brakes.
ꢀ Check battery charge.
If you discover a problem, contact your authorized Pride Provider for assistance.
TIRE INFLATION
If your PMV is equipped with pneumatic tires, you should check or have the air pressure checked at least
once a week. Proper inflation pressures will prolong the life of your tires and help ensure the smooth
operation of your PMV.
WARNING! It is critically important that the psi/bar/kPa air pressure rating indicated on
the tire be maintained in pneumatic tires at all times. Do not underinflate or overinflate
your tires. Low pressure may result in loss of control, and overinflated tires may burst.
Failure to maintain the psi/bar/kPa air pressure rating indicated on pneumatic tires at all
times may result in tire and/or wheel failure.
WARNING! Inflate your PMV tires from a regulated air source with an available pressure
gauge. Inflating your tires from an unregulated air source could overinflate them,
resulting in a burst tire.
NOTE: If the tires on your PMV list the psi rating only, use the following conversion formulas to find
the bar or kPa rating: bar = psi x 0.06895; kPa = psi x 6.89476.
WEIGHT LIMITATIONS
Your PMV is rated for a maximum weight capacity. Refer to the specifications table for information.
MANDATORY! Stay within the specified weight capacity for your PMV. Exceeding the
weight capacity voids your warranty. Pride will not be held responsible for injuries and/or
property damage resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your PMV. Carrying passengers on your PMV may
affect the center of gravity, resulting in a tip or fall.
INCLINE INFORMATION
More and more buildings have ramps with specified degrees of inclination, designed for easy and safe
access. Some ramps may have turning switchbacks (180-degree turns) that require you to have good cor-
nering skills on your PMV.
ꢀ Proceed with extreme caution as you approach the downgrade of a ramp or other incline.
ꢀ Take wide swings with your PMV around any tight corners. If you do that, the PMV’s rear wheels will
follow a wide arc, not cut the corner short, and not bump into or get hung up on any railing corners.
ꢀ When driving down a ramp, keep the PMV’s speed adjustment set to the slowest speed setting to
ensure a safely controlled descent.
ꢀ Avoid sudden stops and starts.
Wrangler
10
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When climbing an incline, try to keep your PMV moving. If you must stop, start up again slowly, and then
accelerate cautiously. When driving down an incline, do so by setting the speed adjustment dial to the
slowest setting and driving in the forward direction only. If your PMV starts to move down the incline
faster than you anticipated or desired, allow it to come to a complete stop by releasing the throttle control
lever. Then push the throttle control lever forward slightly to ensure a safely controlled descent.
WARNING! When on any sort of an incline or decline, never place the PMV in
freewheel mode, especially while seated on it or standing next to it.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face
of the incline. Drive your PMV straight up the incline. This greatly reduces the
possibility of a tip or a fall. Always exercise extreme caution when negotiating an
incline.
WARNING! Do not drive your PMV across the side of an incline or diagonally up or
down an incline; do not stop, if possible, while driving up or down an incline.
WARNING! You should not travel up or down a potentially hazardous incline (i.e.,
areas covered with snow, ice, cut grass, or wet leaves).
WARNING! Even though your PMV is capable of climbing slopes greater than
those listed in the product specifications, do not, under any circumstances,
exceed the incline guidelines or any other specifications presented in this
manual. Doing so could cause instability in your PMV.
Handicap public access ramps are not subject to government regulation in all countries, and therefore do
not necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made,
not designed specifically for PMVs.
These tests were conducted with the PMV’s seat in the highest position and adjusted rearward on the seat
base to its farthest rearward position. Use the specification information as a guideline. Your PMV’s ability
to travel up inclines is affected by your weight, your PMV’s speed, your angle of approach to the incline,
and your PMV setup.
WARNING! Any attempt to climb or descend a slope steeper than what is listedi n the
product specifications may put your PMV in an unstable position and cause it to tip.
WARNING! Never carry an oxygen tank weighing more than 15 lbs. (6.8 kg). Never fill the
rear basket with contents exceeding 15 lbs. (6.8 kg).
Wrangler
11
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
When you approach an incline, it is best to lean forward. See figures 1 and 2. This shifts the center of
gravity of you and your PMV toward the front of the PMV for improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the
powered PMV may "roll back" approximately 1 foot (30.48 cm) before the brake engages. If the throttle
control lever is released while moving in reverse, the powered PMV may "roll back" approximately 3
feet (1 meter) before the brake engages.
Figure 2. Increased Stability Driving Position
Figure 1. Normal Driving Position
CORNERING INFORMATION
Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility
of tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning),
uneven road surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction
(such as passing from a grassy area to a paved area—especially at high speed while turning), and abrupt
directional changes. High cornering speeds are not recommended. If you feel that you may tip over in a
corner, reduce your speed and steering angle (i.e., lessen the sharpness of the turn) to prevent your PMV
from tipping.
WARNING! When cornering sharply, reduce your speed and maintain a stable center of
gravity. When using your PMV at higher speeds, do not corner sharply. This greatly
reduces the possibility of a tip or fall. Always exercise extreme common sense when
cornering.
BRAKING INFORMATION
Your PMV is equipped with two powerful brake systems:
ꢀ Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the
center/stop position.
ꢀ Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop, or
when power is removed from the system for any reason.
Wrangler
12
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
OUTDOOR DRIVING SURFACES
Your PMV is designed to provide optimum stability under normal driving conditions - dry, level surfaces
composed of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when you
will encounter other surface types. For this reason, your PMV is designed to perform admirably on packed
soil, grass, and gravel. Feel free to use your PMV safely on lawns and in park areas.
ꢀ Reduce your PMV’s speed when driving on uneven terrain and/or soft surfaces.
ꢀ Avoid tall grass that can become tangled in the running gear.
ꢀ Avoid loosely packed gravel and sand.
ꢀ If you feel unsure about a driving surface, avoid that surface.
STREETS AND ROADWAYS
WARNING! You should not operate your PMV on public streets and roadways. Be aware
that it may be difficult for traffic to see you when you are seated on your PMV. Obey all
local pedestrian traffic rules. Wait until your path is clear of traffic, and then proceed
with extreme caution.
STATIONARY OBSTACLES (STEPS, CURBS, ETC.)
WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,
porches, stairs, etc.).
WARNING! Do not attempt to have your PMV climb or descend an obstacle that is
inordinately high.
WARNING! Do not attempt to have your PMV proceed backward down any step, curb, or
other obstacle. This may cause the PMV to tip.
WARNING! Be sure your PMV is traveling perpendicular to any curb you may be required
to ascend or descend. See figures 3 and 4.
WARNING! Do not attempt to negotiate a curb that has a height greater than 2 in. (5 cm).
Figure 3. Correct Curb Approach
Figure 4. Incorrect Curb Approach
Wrangler
13
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
INCLEMENT WEATHER PRECAUTIONS
Exposure of your PMV to inclement weather conditions should be avoided whenever possible. If sud-
denly caught up in rain, snow, severe cold or heat while operating your PMV, proceed to shelter at the
earliest opportunity. Thoroughly dry your PMV before storing, charging, or operating your PMV.
PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery
surfaces can cause damage to the PMV and electrical system. Maintain and store your
PMV in a dry and clean condition.
WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of
upholstered and non-upholstered items on the PMV, possibly resulting in skin irritation.
Exercise caution when using your PMV in extremely hot or cold conditions or when
exposing your PMV to direct sunlight for prolonged periods of time.
FREEWHEEL MODE
Your PMV is equipped with manual freewheel levers that, when pushed down, allow the PMV to be
pushed. For more information about how to place your PMV into and out of freewheel mode, see III. “Your
PMV.”
WARNING! When your PMV is in freewheel mode, the braking system is disengaged.
ꢀ Disengage the drive motors only on a level surface.
ꢀ Ensure the key is removed from the key switch.
ꢀ Stand to the side of the PMV to engage or disengage freewheel mode. Never sit on a
PMV to do this.
ꢀ After you have finished pushing your PMV, always return it to the drive mode to lock
the brakes.
An added feature built into the PMV is “push-too-fast” protection, which safeguards the PMV against
gaining excessive speed while in freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
ꢀ If the key is switched “off” while in freewheel mode, the PMV’s controller activates regenerative
braking when the PMV is pushed faster than a maximum threshold which has been preprogrammed.
In this case, the controller is acting as a speed governor.
ꢀ If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any
speed. This prevents the PMV from gaining unwanted momentum should the manual freewheel lever
inadvertently be released while driving the PMV.
STAIRS AND ESCALATORS
PMVs are not designed to travel up or down stairs or escalators. Always use an elevator.
WARNING! Do not use your PMV to negotiate steps or escalators.
DOORS
ꢀ Determine if the door opens toward or away from you.
ꢀ Use your hand to turn the knob or push the handle or push-bar.
ꢀ Drive your PMV gently and slowly forward to push the door open. Or drive your PMV gently and
slowly rearwards to pull the door open.
Wrangler
14
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
ELEVATORS
Modern elevators have a door edge safety mechanism that, when pushed, reopens the door(s).
ꢀ If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge
or allow the rubber door edge to contact the PMV and the door will reopen.
ꢀ Use care that pocketbooks, packages, or PMV accessories do not become caught in elevator doors.
LIFT/ELEVATION PRODUCTS
If you will be traveling with your PMV, you may find it necessary to use a lift/elevation product to aid in
transportation. Pride recommends that you closely review the instructions, specifications, and safety infor-
mation set forth by the manufacturer of the lift/elevation product before using that product.
NOTE: If your PMV’s turning radius is greater than 60 in. (152.4 cm), it may be difficult to maneuver
in elevators and building entrances. Use caution when attempting to turn or maneuver your PMV in
small spaces, and avoid areas that might pose a problem.
WARNING! Never sit on your PMV when it is being used in connection with any
type of lift/elevation product. Your PMV was not designed with such use in mind,
and any damage or injury incurred from such use is not the responsibility of Pride.
BATTERIES
In addition to following the warnings below, be sure to comply with all other battery handling information.
MANDATORY! PMV batteries are heavy. See specifications table. If you are
unable to lift that much weight, be sure to get help. Use proper lifting techniques
and avoid lifting beyond your capacity.
WARNING! Battery posts, terminals, and related accessories contain lead and
lead compounds. Wear goggles and gloves when handling batteries and wash
hands after handling.
WARNING! Always protect the batteries from freezing and never charge a frozen
battery. Charging a frozen battery may result in damage to the battery.
WARNING! Connect the battery harnesses in the proper manner. RED (+) cables
must be connected to positive (+) battery terminals/posts. BLACK (-) cables must
be connected to negative (-) battery terminals/posts. Failure to connect your
battery harnesses in the proper manner may result in personal injury and/or
damage to your PMV. REPLACE cables immediately if damaged.
BATTERY DISPOSAL AND RECYCLING
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag. Contact your local
waste disposal agency or your authorized Pride Provider for instructions on disposal and battery recycling,
which is our recommended course of action.
PREVENTING UNINTENDED MOVEMENT
WARNING! If you anticipate being seated in a stationary position for an extended period
of time, turn off the power. This will prevent unexpected motion from inadvertent throttle
control lever contact.
Wrangler
15
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
MOTOR VEHICLE TRANSPORT
Pride recommends that you do not remain seated in your PMV while traveling in a motor vehicle. The
PMV should be stowed in the trunk of a car or in the back of a truck or van with batteries removed and
properly secured. In addition, all removable PMV parts, including the armrests, seat, and shroud should be
removed and/or properly secured during motor vehicle transport.
WARNING! Although your PMV may be equipped with a positioning belt, this belt is not
designed to provide proper restraint during motor vehicle transport. Anyone traveling in
a motor vehicle should be properly secured in the motor vehicle seat with safety belts
fastened securely.
WARNING! Do not sit on your PMV while it is in a moving vehicle.
WARNING! Always be sure your PMV and its batteries are properly secured when it is
being transported. Batteries should be secured in an upright position and protective caps
should be installed on the battery terminals. Batteries should not be transported with any
flammable or combustible items.
GETTING ONTO AND OFF OF YOUR PMV
Getting onto and off of your PMV requires a good sense of balance. Please observe the following safety
tips when getting onto and off of your PMV:
ꢀ Remove the key from the key switch.
ꢀ Ensure that your PMV is not in freewheel mode. See III. “Your PMV.”
ꢀ Make certain that the seat is secured into place.
ꢀ Pivot the armrests up to make getting onto and off of the PMV easier.
WARNING! Position yourself as far back as possible in the PMV seat to prevent the PMV
from tipping.
WARNING! Avoid putting all your weight on the PMV armrests and do not use the
armrests for weight bearing purposes, such as transfers. Such use may cause the PMV
to tip, resulting in a fall from the PMV and personal injury.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the
PMV to tip.
REACHING AND BENDING
Avoid reaching or bending while driving your PMV. When reaching, bending, or leaning while seated on
your PMV, it is important to maintain a stable center of gravity and keep the PMV from tipping. Pride
recommends that the PMV user determine his/her personal limitations and practice bending and reaching
in the presence of a qualified healthcare professional.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the
PMV deck or from either side of the PMV. Movements such as these may change your
center of gravity and the weight distribution of the PMV and cause your PMV to tip.
PROHIBITED! Keep your hands away from the drive tires when driving. Be aware that
loose fitting clothing can become caught in drive tires.
Wrangler
16
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
POSITIONING BELTS
Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for deter-
mining your requirement for a positioning belt in order to operate your PMV safely.
WARNING! If you require a positioning belt to safely operate your PMV, make sure it is
fastened securely.
PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS
The PMV user must exercise care and common sense when operating his/her PMV. This includes aware-
ness of safety issues when taking prescribed or over-the-counter drugs or when the user has specific phys-
ical limitations.
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and limitations
may impair your ability to operate your PMV in a safe manner.
ALCOHOL/SMOKING
The PMV user must exercise care and common sense when operating his/her PMV. This includes aware-
ness of safety issues while under the influence of alcohol or while smoking.
WARNING! Do not operate your PMV while you are under the influence of alcohol, as this
may impair your ability to drive safely.
WARNING! Pride strongly recommends that you do not smoke cigarettes while seated in
your PMV, although the PMV has passed the necessary testing requirements for cigarette
smoking. You must adhere to the following safety guidelines if you decide to smoke
cigarettes while seated in your PMV.
ꢀ Do not leave lit cigarettes unattended.
ꢀ Keep ashtrays a safe distance from the seat cushions.
ꢀ Always make sure cigarettes are completely extinguished before disposal.
Wrangler
17
Download from Www.Somanuals.com. All Manuals Search And Download.
I I . S A F E T Y
ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic and radio frequency
waves can have an adverse affect on the performance of electrically-powered mobility
vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile
two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters,
wireless computer links, microwave signals, paging transmitters, and medium-range mobile transceivers
used by emergency vehicles. In some cases, these waves can cause unintended movement or damage to
the control system. Every electrically-powered mobility vehicle has an immunity (or resistance) to EMI.
The higher the immunity level, the greater the protection against EMI. This product has been tested and
has passed at an immunity level of 20 V/M.
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio
transmitters may cause unintended movement of your electrically-powered mobility
vehicle due to EMI. Exercise caution when using any of these items while operating your
mobility vehicle and avoid coming into close proximity of radio and TV stations.
WARNING! The addition of accessories or components to the electrically-powered
mobility vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your
PMV in any way not authorized by Pride.
WARNING! The electrically-powered mobility vehicle itself can disturb the performance
of other electrical devices located nearby, such as alarm systems.
unintended motion or brake release occurs, turn your PMV off as soon as it is safe to do so. Contact
your authorized Pride Provider to report the incident.
Wrangler
18
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R P M V
CONTROL CONSOLE ASSEMBLY
PROHIBITED! Do not expose the control console assembly to moisture. In the event that
the control console assembly does become exposed to moisture, do not attempt to
operate your PMV until the control console assembly has dried thoroughly.
The control console assembly, located on the front section, houses all of the controls you need to operate
your PMV, including the speed adjustment dial, throttle control lever, battery condition meter, horn but-
ton, and key switch. See figure 5.
BATTERY CONDITION METER
SPEED ADJUSTMENT DIAL
5-10 MPH SWITCH
KEY SWITCH
KEY
HORN BUTTON
THROTTLE CONTROL
LEVER (REVERSE)
THROTTLE CONTROL
LEVER (FORWARD)
LIGHT SWITCH
TILLER ADJUSTMENT LEVER
Figure 5. Control Console Assembly
KEY SWITCH
ꢀ Fully insert the key into the key switch to power up your PMV.
ꢀ Pull the key out to power down your PMV.
WARNING! If the key is removed from the key switch while your PMV is in motion, the
electronic brakes will engage and your PMV will come to an abrupt stop!
Tiller Adjustment Lever
This lever allows you to adjust the tiller between four different positions. For tiller adjustment instruc-
tions, see VI. “Comfort Adjustments.”
Horn Button
This button activates a warning horn. Your PMV must be powered up for the horn to be operational.
Do not hesitate to use the warning horn when doing so may prevent accident or injury.
Wrangler
19
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R P M V
Battery Condition Meter
When the key is fully inserted into the key switch, this meter indicates the approximate battery voltage
strength. For further information on battery charging, see IV. “Batteries and Charging.”
5-10 MPH Switch
This switch limits the top speed of your PMV to either 5 mph (8 km/h) or 10 mph (16 km/h). Toggle this
switch to either 5 mph (8 km/h) or 10 mph (16 km/h).
NOTE: When driving indoors, it is recommended you set the switch to 5 mph (8 km/h).
Light Switch
This switch turns your PMV’s headlight on and off.
ꢀ Toggle this switch to the right to turn the light on.
ꢀ Toggle this switch to the left to turn the light off.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your PMV up to the maximum
speed you preset with the speed adjustment dial.
ꢀ Place your right hand on the right handgrip and your left hand on the left handgrip.
ꢀ Use your right thumb to push the right side of the lever to disengage the PMV brakes and move
forward.
ꢀ Release the lever and allow your PMV to come to a complete stop before pushing the left side of the
lever to move in reverse.
ꢀ When the throttle control lever is completely released, it automatically returns to the center “stop”
position and engages the PMV brake.
REAR SECTION
The electronic controller module, batteries, main circuit breaker, power charger cord, freewheel levers,
and the motor assemblies are located on the rear section of your PMV. See figures 6 and 6A.
Batteries
The batteries store the electrical energy that powers your PMV. See IV. “Batteries and Charging” for
information on how to charge your PMV’s batteries.
Electronic Controller Module (Not Shown)
This module is located on the PMV’s rear section, under the utility tray cover. The controller assembly
receives electrical signals from the console controls and sends power to the motor, the brakes, and the
lighting system.
NOTE: Only authorized Pride service personnel should ever remove the utility tray cover.
PROHIBITED! Do not expose the electronic controller module to moisture. If it does
become exposed to moisture, do not attempt to operate your PMV until it has dried
thoroughly.
Wrangler
20
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R P M V
Main Circuit Breaker (Reset Button)
When the voltage in your PMV’s batteries becomes low or your PMV is heavily strained because of
excessive loads, the main circuit breaker may trip to protect your PMV’s motor and electronics from
damage. See figure 6.
ꢀ The main circuit breaker is mounted between the two batteries.
ꢀ When the breaker trips, the entire electrical system of your PMV is shut down.
ꢀ The main circuit breaker is designed to manually reset after one minute.
ꢀ If the breaker trips frequently, you may need to charge your batteries more often or have your Pride
Provider perform a load test on your PMV’s batteries.
ꢀ If the main circuit breaker trips repeatedly, see your authorized Pride Provider for service.
BATTERY
CHARGER
MAINCUIRCUIT
BREAKER
BATTERIES
Figure 6. Rear Section
Battery Charger
The PMV comes with its own onboard battery charger. When the charger is plugged into an electrical
outlet, it charges the PMV’s batteries. See IV. “Batteries and Charging.”
Manual Freewheel Levers
Whenever you want to push your PMV for short distances, you can put it in manual freewheel mode. The
manual freewheel levers are located on the end of the motors at the rear of the PMV. See figure 6A.
1. Remove the key from the key switch.
2. Push down on both manual freewheel levers to disable the drive and the brake systems. This will
enable you to push the PMV.
3. Pull up on both manual freewheel levers to reengage the drive and the brake systems and take your
PMV out of freewheel mode.
WARNING! When your PMV is in freewheel mode, the braking system is disengaged.
ꢀ Disengage the drive motors only on a level surface.
ꢀ Ensure the key is removed from the key switch.
ꢀ Stand to the side of the PMV to engage or disengage freewheel mode. Never sit on a
PMV to do this.
ꢀ After you have finished pushing your PMV, always return it to the drive mode to lock
the brakes.
Wrangler
21
Download from Www.Somanuals.com. All Manuals Search And Download.
I I I . Y O U R P M V
Charger Power Cord
The charger power cord is connected to the PMV’s onboard battery charger. When plugged into an elec-
trical outlet, it will charge the PMV’s batteries.
Motor Assembly
The motor assembly is an electromechanical unit that converts electrical energy from your PMV’s batteries
into the controlled mechanical energy that drives the PMV’s wheels.
UTILITY TRAY COVER
AMMETER
CHARGER POWER
CORD
MOTOR ASSEMBLY
MOTOR ASSEMBLY
MANUAL FREE-
WHEEL LEVER
MANUAL FREEWHEEL
LEVER
Figure 6A. Rear Section
Wrangler
22
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
BATTERIES AND CHARGING
Your PMV requires two long-lasting, 12-volt, deep-cycle batteries that
are sealed and maintenance free. Recharge the batteries with the conve-
nient onboard battery charger.
ꢀ Charge your PMV’s batteries prior to using for the first time.
ꢀ Keep your batteries fully charged to keep your PMV running
smoothly.
NOTE: Use only the onboard battery charger supplied with your PMV.
Figure 7. Ammeter
READING YOUR BATTERY VOLTAGE
The battery condition meter on the control console assembly indicates the approximate strength of your
batteries. (The meter reads 24 volts when your batteries are fully charged.) To check the charge, you must
first unplug the onboard battery charger and insert the key into the key switch. To ensure the highest
accuracy, the battery condition meter should be checked while operating your PMV at full speed on a
level surface.
You can also use the ammeter to check your batteries’ charge. The ammeter is located on the utility tray
under the rear shroud. See figure 7. The amperage reading should be at or near zero (0) when the batteries
are fully charged. The battery charger must be plugged into a standard electrical outlet to obtain an
ammeter reading.
CHARGING YOUR BATTERIES
PROHIBITED! Removal of grounding prong can create electrical hazard. If
necessary, properly install an approved 3-pronged adapter to an electrical outlet
having 2-pronged plug access.
PROHIBITED! Never use an extension cord to plug in your battery charger. Plug
the charger directly into a properly wired standard electrical outlet.
PROHIBITED! Do not allow unsupervised children to play near the PMV while the
batteries are charging. Pride recommends that you do not charge the batteries
while the PMV is occupied.
MANDATORY! Read the battery charging instructions in this manual and in the
manual supplied with the battery charger before charging the batteries.
WARNING! Explosive gases may be generated while charging the batteries. Keep
the PMV and battery charger away from sources of ignition such as flames or
sparks and provide adequate ventilation when charging the batteries.
WARNING! Inspect the battery charger, wiring, and connectors for damage before
each use. Contact your authorized Pride Provider if damage is found.
WARNING! Do not attempt to open the battery charger case. If the battery charger
does not appear to be working correctly, contact your authorized Pride Provider.
WARNING! If the battery charger is equipped with cooling slots, then do not
attempt to insert objects through these slots.
Wrangler
23
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
WARNING! If your battery charger has not been tested and approved for outdoor
use, then do not expose it to adverse or extreme weather conditions. If the battery
charger is exposed to adverse or extreme weather conditions, then it must be
allowed to adjust to the difference in environmental conditions before use indoors.
Refer to the manual supplied with the battery charger for more information.
Follow these steps to safely charge your batteries:
1. Position your PMV close to a standard electrical outlet.
2. Remove the key from the key switch.
3. Ensure both freewheel levers are in the drive position.
4. Extend the charger power cord (see figure 6A) and plug it into the electrical outlet. We recommend
you charge your PMV’s batteries for 8 to 14 hours.
5. When the batteries are fully charged (indicated by the ammeter reading 0), unplug the onboard charger
power cord from the electrical outlet.
There are two LED indicators (red and green) on the front of the battery charger.
ꢀ When lit, the red LED indicates that the batteries are being charged.
ꢀ When lit, the green LED indicates that the batteries are fully charged.
ꢀ When the green and red LEDs are simultaneously lit, it indicates charging is nearly complete.
NOTE: There is a charger inhibit on your PMV. Your PMV does not run and the battery condition
meter does not operate while the batteries are charging.
FREQUENTLY ASKED QUESTIONS (FAQs)
How does the charger work?
When your PMV’s battery voltage is low, the charger works harder and sends more electrical current to
the batteries to bring up their charge. As the voltage of the batteries approaches a full charge, the charger
sends less electrical current to the batteries. When the batteries are fully charged, the current sent to them
from the charger is at nearly zero amperage. Therefore, when the charger is plugged in, it maintains the
charge on your PMV’s batteries but does not overcharge them. Refer to the manual supplied with the
battery charger for charging instructions.
Can I use a different charger?
For the safest, most efficient, and balanced charging of your PMV’s batteries, you should simultaneously
charge both batteries using only the manufacturer-supplied onboard battery charger.
How often must I charge the batteries?
Two major factors must be considered when deciding how often to charge your PMV’s batteries:
ꢀ
ꢀ
All day PMV use on a daily basis.
Infrequent or sporadic PMV use.
Wrangler
24
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
With these considerations in mind, you can determine just how often and for how long you should charge
your PMV’s batteries. We designed the onboard charger so that it does not overcharge your PMV’s bat-
teries; however, you may encounter some problems if you do not charge your batteries often enough and
if you do not charge them on a regular basis. Following the guidelines below will provide safe and reliable
battery operation and charging:
ꢀ If you use your PMV daily, charge its batteries as soon as you finish using it for the day. Your PMV
will be ready each morning to give you a “full day” of service. We recommend you charge your
PMV’s batteries for 8 to 14 hours after daily use.
ꢀ If you use your PMV once a week or less, charge its batteries at least once a week for 12 to 14 hours
at a time.
ꢀ Keep your PMV’s batteries fully charged.
ꢀ Avoid deeply discharging your PMV’s batteries.
ꢀ Do not charge your PMV’s batteries for more than 24 consecutive hours.
What if my PMV doesn’t arrive with batteries?
If your PMV does not come with batteries already installed from Pride, you have chosen to purchase the bat-
teries separately. Carefully follow the instructions below for proper wire placement and battery installation.
To install the batteries in your PMV:
1. Remove the seat and rear shroud from the PMV.
2. Place the batteries into the battery wells with the terminals facing away from the seat post. Be sure
that the positive (+) terminal of the left side battery and the negative (-) terminal of the right side
battery are facing forward. See figure 8.
3. Connect the main circuit breaker to the front battery terminals.
4. Connect the rear black cable to the negative (-) battery terminal.
5. Connect the rear red cable to the positive (+) battery terminal.
6. Fasten the battery tie-down straps.
7 Reinstall the rear shroud and seat.
MAIN CIRCUIT BREKAER
BATTERY
BATTERY TIE-DOWN STRAP
REAR RED CABLE
REAR BLACK CABLE
Figure 8. Placing and Removing Batteries
Wrangler
25
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
To remove the batteries:
1. Remove the seat and rear shroud.
2. Disconnect all the cables from the battery terminals.
3. Unfasten the battery tie-down straps.
4. Remove the batteries.
How can I get maximum range or distance per charge?
Rarely will you have ideal driving conditions - smooth, flat, hard driving surfaces with no wind or curves.
You will often face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of
these driving conditions affect the distance or running time per battery charge. Below are a few sugges-
tions for obtaining the maximum range per battery charge.
ꢀ Always fully charge your PMV’s batteries prior to your daily use.
ꢀ Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on each tire.
ꢀ Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.
ꢀ Limit your baggage weight to essential items.
ꢀ Try to maintain an even speed while your PMV is in motion.
ꢀ Avoid stop-and-go driving.
What type and size of battery should I use?
We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are
deep-cycle batteries that are similar in performance in your PMV. Do not use wet-cell batteries, which
have removable caps.
WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-
Cell batteries to reduce the risk of leakage or explosive conditions.
NOTE: Sealed batteries are not serviceable. Do not remove the caps.
Why do my new batteries seem weak?
Deep-cycle batteries employ a different chemical technology than that used in car batteries, nickel-cad-
mium batteries (nicads), or in other common battery types. Deep-cycle batteries are specifically designed
to provide power, drain down their charge, and then accept a relatively quick recharge.
We work closely with our battery manufacturer to provide batteries that best suit your PMV’s specific
electrical demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers.
During shipping, the batteries may encounter temperature extremes that may influence their initial perfor-
mance. Heat diminishes the charge on the battery; cold slows the available power and extends the time
needed to recharge the battery.
It may take a few days for the temperature of your PMV’s batteries to stabilize and adjust to their new
room or ambient temperature. More importantly, it takes a few charging cycles (a partial drain followed
by a full recharge) to establish the critical chemical balance that is essential to a deep-cycle battery’s peak
performance and long life.
Wrangler
26
Download from Www.Somanuals.com. All Manuals Search And Download.
I V . B A T T E R I E S A N D C H A R G I N G
Please follow these steps to properly break in your PMV’s new batteries for maximum efficiency and
service life:
1. Fully recharge any new battery prior to its initial use. This initial charging cycle brings the batteries up
to about 88% of their peak performance level.
2. Operate your new PMV in familiar and safe areas. Drive slowly at first, and do not travel too far from
your home or familiar surroundings until you have become accustomed to your PMV’s controls and
have properly broken in your PMV’s batteries.
3. Fully recharge the batteries. This recharge should bring the batteries up to about 90% of their peak
performance level.
4. Operate your PMV again.
5. Fully recharge the batteries again.
6. After four or five charging cycles, the batteries are able to receive a charge of 100% of their peak
performance level and are able to last for an extended period of time.
How can I ensure maximum battery life?
Fully charged deep-cycle batteries provide reliable performance and extended battery service life. Keep
your PMV’s batteries fully charged whenever possible. Batteries that are deeply discharged, infrequently
charged, or stored without a full charge may be permanently damaged and cause unreliable performance
and limited service life.
For prolonged storage, you may wish to place several boards under the frame of your PMV to raise it off
the ground and take the weight off the tires. This reduces the possibility of flat spots developing on the
areas of the tires contacting the ground.
What about public transportation?
If you intend to use public transportation while using your PMV, you must contact the transportation
Provider in advance to determine their specific requirements.
Wrangler
27
Download from Www.Somanuals.com. All Manuals Search And Download.
V . O P E R A T I O N
BEFORE GETTING ONTO YOUR PMV
ꢀ Have you fully charged the batteries? See IV. “Batteries and Charging.”
ꢀ Are the manual freewheel levers in the drive position? See III. “Your PMV.” Never leave the freewheel
levers pushed down unless you are manually pushing your PMV.
GETTING ONTO YOUR PMV
1. Make certain that the key is removed from the key switch.
WARNING! Never attempt to get onto or off of your PMV without first removing the key
from the key switch. This will prevent the PMV from moving if accidental throttle control
lever contact is made.
2. Stand at the side of your PMV.
3. Push down on the seat rotation lever to disengage the seat and rotate the seat until it faces you; release
the seat rotation lever to secure the seat in place.
4. Position yourself comfortably and securely in the seat.
5. Push down on the seat rotation lever and rotate the seat until you face forward; release the seat rotation
lever to secure the seat in place.
6. Make certain that your feet are safely on the floorboard.
PRE-RIDE ADJUSTMENTS AND CHECKS
ꢀ Are you positioned comfortably in the seat?
ꢀ Is the seat at the proper height? See VI. “Comfort Adjustments.”
ꢀ Is the seat fixed securely in place? See VI. “Comfort Adjustments.”
ꢀ Is the tiller at a comfortable setting and locked securely in place? See VI. “Comfort Adjustments.”
ꢀ Is the key fully inserted into the key switch? See III. “Your PMV.”
ꢀ Does your PMV’s horn work properly?
ꢀ Is your proposed path clear of people, pets, and obstacles?
ꢀ Have you planned your route to avoid adverse terrain and as many inclines as possible?
OPERATING YOUR PMV
WARNING! The following can adversely affect steering and stability while operating your
PMV, resulting in loss of control, tipping, and/or personal injury:
ꢀ
ꢀ
ꢀ
ꢀ
Holding onto or attaching a leash to walk your pet
Carrying passengers (including pets)
Hanging any article from the tiller
Towing or being pushed by another motorized vehicle
ꢀ Set the 5-10 mph switch to your desired maximum speed of 5 or 10 mph (8 or 16 km/h); then set the
speed adjustment dial to your desired speed. We recommend you initially set the 5-10 mph switch to
5 mph (8 km/h) and the speed adjustment dial to the tortoise (slowest speed setting).
ꢀ Insert the key into the key switch.
ꢀ With your hands on the handgrips, use your thumb to gently push the right side of the throttle control
lever to disengage the brakes and move forward; the electronic brake automatically disengages and the
PMV accelerates smoothly to the speed you set with the speed adjustment dial.
Wrangler
28
Download from Www.Somanuals.com. All Manuals Search And Download.
V . O P E R A T I O N
ꢀ Pull on the left handgrip to steer your PMV to the left, or pull on the right handgrip to steer your PMV
to the right.
ꢀ Move the tiller to the center position to drive straight ahead.
ꢀ Gently release the throttle control lever to decelerate and come to a complete stop. The electronic brake
automatically engages when your PMV comes to a stop.
ꢀ To move in reverse, use your thumb to gently push the left side of the throttle control lever to disengage
your PMV’s brakes and move rearward.
NOTE: Your PMV’s reverse speed is slower than the speed you set with the speed adjustment dial and
the 5-10 mph switch.
GETTING OFF OF YOUR PMV
1. Bring your PMV to a complete stop.
2. Remove the key from the key switch.
3. Push down on the seat rotation lever to disengage the seat and rotate the seat until you are facing toward
the side of your PMV; release the seat rotation lever to secure the seat in place.
4. Carefully and safely get out of the seat and stand to the side of your PMV.
5. You can leave the seat facing to the side to facilitate boarding your PMV next time.
POWER DOWN TIMER FEATURE
Your PMV is equipped with an energy saving power down timer feature that is designed to preserve your
PMV’s battery life. If you mistakenly leave the key in your PMV but do not use the PMV for approxi-
mately 20 minutes, the PMV automatically shuts down.
If your PMV power down timer feature takes effect, perform the following steps to resume normal operation:
ꢀ Remove the key from the key switch.
ꢀ Reinsert the key to power up your PMV.
Wrangler
29
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
TILLER ANGLE ADJUSTMENT
WARNING! Remove the key from the key
switch before adjusting the tiller or the
seat. Never attempt to adjust the tiller or
the seat while the PMV is in motion.
You can adjust the tiller angle to four different positions.
1. Pull up on the tiller adjustment lever. See figure 9.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever. The tiller will remain in
that position.
Figure 9. Tiller Adjustment Lever
NOTE: In order to lower the tiller to its lowest position, you
must first remove the seat and both batteries.
SEAT HEIGHT ADJUSTMENT
Your PMV’s seat can be repositioned to one of three different
heights.
1. Remove the seat from your PMV. See figure 10.
2. Use the attached ring to pull and remove the ball detent pin
from the lower seat post. See figure 11.
3. Raise or lower the upper seat post to the desired seat
height.
4. While holding the upper seat post at that height, match up
the holes in the upper seat post and the lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.
Figure 10. Seat Removal
LOCATING HOLES
UPPER
SEAT POST
LOWER SEAT
POST
BALL DETENT
PIN
Figure 11. Seat Height Adjustment
Wrangler
30
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
HIGH-BACK SEAT HEADREST ADJUSTMENT
If your PMV is equipped with a high-back seat, the head-
rest height can be adjusted to several positions.
1. Pulling up on the headrest will raise its position. See
figure 12.
2. Pushing down on the headrest will lower its position.
3. Pulling the headrest forward or pushing it backward
will adjust it to several positions.
HEADREST
LUMBAR
SUPPORT
ADJUSTMENT
DIAL
SEATBACK
ADJUSTMENT
LEVER
SEATBACK ADJUSTMENT
To adjust your PMV’s reclining seat, perform these steps
(see figure 12):
1. While pulling up on the seatback adjustment lever, lean
forward or backward to adjust the seatback.
2. Release the seatback adjustment lever once the seat is
in a comfortable riding position.
Figure 12. Seatback and Headrest Adjustments
WARNING! Always keep your back
pressed firmly against the seatback while
adjusting the angle.
WARNING! Do not operate the PMV with
the seat in the reclined position.
LUMBAR SUPPORT ADJUSTMENT DIAL
The lumbar support is inside the lower part of the seatback.
Turn the lumbar support adjustment dial counterclockwise to
SEAT SLIDING
LEVER
S E A T R O T A T I O N
LEVER
move the support into a comfortable position. See figure 12
.
Figure 13. Sliding Seat Adjustment
FRONT-TO-BACK SEAT ADJUSTMENT
You can reposition the PMV’s seat forward or rearward to adjust the distance between the seat and the
tiller. See figure 13.
1. Pull up on the seat sliding lever.
2. While holding the lever up, slide the seat forward or rearward.
3. Release the seat sliding lever once the seat is in the desired position.
SEAT ROTATION ADJUSTMENT
The seat rotation lever secures the seat in one of four positions. See figure 13.
1. Push down on the seat rotation lever to disengage the seat.
2. Rotate the seat to the desired position.
3. Release the seat rotation lever to secure the seat in place.
Wrangler
31
Download from Www.Somanuals.com. All Manuals Search And Download.
V I . C O M F O R T A D J U S T M E N T S
ARMREST ANGLE ADJUSTMENT
The armrests of your PMV can be adjusted upward or downward by turn-
ADJUSTMENT
DIAL
ing the adjustment dial. See figure 14.
The armrests also pivot upward to make getting on and off of your PMV
easier.
NOTE: If your PMV is not equipped with a reclining high-back seat, as
shown in figure 12, you will be able to adjust the height and width of the
armrest by following the directions below.
Figure 14. Armrest Angle
Adjustment
ARMREST HEIGHT ADJUSTMENT
You will need the following tools to adjust the height of the armrests:
• 5/32” Hex Key •1/8” Hex Key • 7/16” Wrench
1. Loosen the setscrew on the side of the height adjustment tube with the 1/8” hex key.
2. Loosen and remove the acorn nut and screw holding the height adjustment tube in place.
3. Raise or lower the height adjustment tube to the desired height.
4. Align the holes in the adjustment tube with the holes in the armrest upright.
5. Insert the screw through the holes in both the height adjustment tube and the armrest upright.
6. Install and tighten the acorn nut.
7. Tighten the setscrew on the side of the height adjustment tube.
8. Repeat for the other armrest.
ARMREST WIDTH ADJUSTMENT
The armrest width of your PMV can be adjusted inward or outward.
1. Loosen the armrest adjustment knobs at the back of the seat frame. See figures 15 and 16.
2. Slide the armrests in or out to the desired width.
3. Tighten the armrest adjustment knobs.
HEIGHT ADJUSTMENT TUBE
ARMREST ADJUSTMENTS KNOBS
ACORN NUT
SETSCREW
ARMREST
ADJUSTMENT
KNOB
Figure 15. Armrest Height Adjustment
Figure 16. Armrest Adjustments
Wrangler
32
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I . D I S A S S E M B L Y A N D A S S E M B L Y
DISASSEMBLY
SEAT
You can disassemble the PMV into six com-
ponents. See figure 17. No tools are required
to disassemble or assemble your PMV, but
keep in mind that the disassembled sections
of the PMV take up more floor space than the
assembled unit. Always disassemble or
assemble your PMV on a level, dry surface
with sufficient room for you to work and
move around your PMV–about 5 feet (1.5
meters) in all directions. Remember that
some PMV components are heavy and you
may need assistance when lifting them.
MAIN FRAME
REAR SHROUD
BATTERIES
FRONT BASKET
Figure 17. Wrangler Components
WARNING! Do not lift beyond your physical capability. Ask for assistance when necessary
while disassembling and assembling your PMV.
Seat
To remove the PMV’s seat, see VI. “Comfort Adjustments.”
Rear Shroud
To remove the rear shroud:
1. Remove the seat from your PMV. See figure 10.
2. Lift the shroud up and over the seat post.
Batteries
To remove the batteries from you PMV, see IV. “Batteries and Charging.”
Wrangler
33
Download from Www.Somanuals.com. All Manuals Search And Download.
V I I I . B A S I C T R O U B L E S H O O T I N G
Any electromechanical device occasionally requires some troubleshooting. However, most of the prob-
lems that may arise can usually be solved with a bit of thought and common sense. Many of these problems
occur because the batteries are not fully charged or because the batteries are worn down and can no longer
hold a charge.
What if all of my PMV systems appear to be “dead?”
ꢀ Ensure the key is fully inserted in the key switch.
ꢀ Ensure the batteries are fully charged.
ꢀ Push in the main circuit breaker reset button.
ꢀ Ensure the 9-pin connector is firmly attached.
ꢀ Ensure both battery harnesses are firmly connected to the electronic controller and to the battery ter-
minals.
What if my PMV’s battery condition meter shows a full charge, but my PMV does not move when
I push the throttle control lever?
Ensure your PMV was not left in freewheel mode. (Pull up on the freewheel lever to restore normal opeation.)
NOTE: When the freewheel lever is pushed down, your PMV’s brakes are disengaged and all power to
the transaxle is cut.
What if my PMV’s main circuit breaker trips repeatedly?
ꢀ Charge your PMV’s batteries more frequently.
ꢀ Have both of your PMV’s batteries load tested by your authorized Pride Provider.
ꢀ Obtain a battery load tester at most automotive parts stores; follow the directions supplied with the
load tester.
What if my PMV’s battery condition meter dips way down and the motor surges or hesitates when
I press the throttle control lever?
ꢀ Fully charge your PMV’s batteries.
ꢀ Have your authorized Pride Provider load test each battery.
ꢀ Obtain a battery load tester at most automotive parts stores; follow the directions supplied with the
load tester.
If you experience any problems with your PMV that you are unable to resolve, immediately contact your
authorized Pride Provider for information, maintenance, and service.
Wrangler
34
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
Your PMV requires a minimal amount of care and maintenance. If you do not feel confident in your ability
to perform the maintenance listed below, you may schedule inspection and maintenance at your authorized
Pride Provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
ꢀ If equipped with pneumatic tires, always maintain the psi/bar/kPa air pressure rating indicated on each
tire for pneumatic tires.
WARNING! It is important that the psi/bar/kPa air pressure rating indicated on each tire
be maintained in pneumatic tires at all times. Do not underinflate or overinflate your
tires. Low pressure may result in loss of control, and overinflated tires may burst. Failure
to maintain the psi/bar/kPa air pressure rating indicated on pneumatic tires at all times
may result in tire and/or wheel failure.
ꢀ Regularly inspect your PMV’s tires for signs of wear.
WHEEL REPLACEMENT
If your PMV is equipped with pneumatic tires and you have a flat tire, you can have the tube replaced. If
your PMV is equipped with a solid tire insert, either the solid insert or the entire wheel must be replaced
depending on the model. Contact your authorized Pride Provider for information regarding replacement
wheels for your PMV.
WARNING! Wheels on your PMV should only be serviced/replaced by an authorized Pride
Provider or qualified technician.
WARNING! Completely deflate pneumatic tires before dismantling the rim or attempting
repair.
WARNING! When changing a tire, remove only the center lug nut, then remove the wheel.
If any further disassembly is required, deflate the tire completely or it may explode.
EXTERIOR SURFACES
Bumpers, tires, trim, and the tiller boot can benefit from an occasional application of rubber or vinyl
conditioner.
WARNING! Do not use a rubber or vinyl conditioner on the PMV’s vinyl seat, floorboard,
or tire tread, as this may cause them to become dangerously slippery.
BATTERY TERMINAL CONNECTIONS
ꢀ Make certain that the terminal connections remain tight and uncorroded.
ꢀ The batteries must sit flat in the battery wells.
ꢀ The battery terminals should face the rear of the PMV.
ABS PLASTIC SHROUDS
ꢀ The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are
coated with an advanced formula urethane paint.
ꢀ A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
These items are all prelubricated, sealed, and require no subsequent lubrication.
Wrangler
35
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
WIRING HARNESSES
ꢀ Regularly check all wiring connections.
ꢀ Regularly check all wiring insulation, including the charger power cord, for wear or damage.
ꢀ Have your authorized Pride Provider repair or replace any damaged connector, connection, or insula-
tion that you find before using your PMV again.
PROHIBITED! Even though the PMV has passed the necessary testing requirements for
ingress of liquids, you should keep electrical connections away from sources of
dampness, including direct exposure to water or bodily fluids and incontinence. Check
electrical components frequently for signs of corrosion and replace as necessary.
MOTOR BRUSHES
The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi-
cally for wear by your authorized Pride Provider.
CONSOLE, CHARGER, AND REAR ELECTRONICS
ꢀ Keep these areas free of moisture.
ꢀ Allow these areas to dry thoroughly if they have been exposed to moisture before operating your PMV
again.
FUSE REPLACEMENT
In the event a fuse should cease to work:
1. Remove the fuse by pulling it out of its slot.
2. Examine the fuse to be sure it is blown. See figures 18 and 18A.
3. Insert a new fuse of the same rating.
WARNING! The replacement fuse must exactly match the rating of the fuse being
replaced. Failure to use properly rated fuses may cause damage to the electrical system.
Figure 18. Working Fuse
Figure 18A. Blown Fuse (Replace)
NYLON LOCK NUT REPLACEMENT
Any nylon insert lock nut removed during the periodic maintenance, assembly, or disassembly of the PMV
must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to
the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local
hardware stores or through your authorized Pride Provider.
Wrangler
36
Download from Www.Somanuals.com. All Manuals Search And Download.
I X . C A R E A N D M A I N T E N A N C E
STORING YOUR PMV
If you plan on not using your PMV for an extended period of time, it is best to:
1. Fully charge its batteries prior to storage.
2. Disconnect the batteries from the PMV.
3. Store your PMV in a warm, dry environment.
4. Avoid storing your PMV where it will be exposed to temperature extremes.
WARNING! Always protect batteries from freezing temperatures and never charge a
frozen battery. Charging a frozen battery can result in damage to the battery.
Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures,
or stored without a full charge may be permanently damaged, causing unreliable performance and limited
service life. It is recommended that you charge the PMV batteries periodically throughout periods of
prolonged storage to ensure proper performance.
You may wish to place several boards under the frame of your PMV to raise it off of the ground during
periods of prolonged storage. This takes the weight off the tires and reduces the possibility of flat spots
developing on the areas of the tires contacting the ground.
DISPOSAL OF YOUR PMV
Your PMV must be disposed of according to applicable local and national statutory regulations. Contact
your local waste disposal agency or authorized Pride Provider for information on proper disposal of pack-
aging, metal frame components, plastic components, electronics, and batteries.
Wrangler
37
Download from Www.Somanuals.com. All Manuals Search And Download.
A P P E N D I X I - S P E C I F I C A T I O N S
25-28” (63-71 cm)
8” (20 cm)
80°
(48-58 cm)
19-23”
2” (5 cm)
7” (18 cm)
63” (160 cm)
16” (41 cm)
18” (46 cm)
25” (64 cm)
77” (196 cm)
Turning Radius
31” (79 cm)
Figure 19. Wrangler Dimensions
Wrangler
38
Download from Www.Somanuals.com. All Manuals Search And Download.
A P P E N D I X I - S P E C I F I C A T I O N S
Model Numbers
PMV600
2
Overall Length
See figure 19.
2
Overall Width
Tires
See figure 19.
Type: Pneumatic Front: 6 in. x 13 in.; Rear: 6 in. x 13 in. (15 x 33 cm)
400 lbs. (181.4 kg) maximum
Weight Capacity
3
Battery Type (not included) Two 12V, 100AH
Horsepower
Charger
3.0 hp (peak)
Onboard 5-amp charger
1
Speed (Max)
Variable up to 10 mph (60% reverse)
Maximum Allowable Incline 5° (8.7%)
1
Range
Up to 30-35 miles per charge with 100Ah batteries
2
Turning Radius
Body Colors
Seating
See figure 19.
Candy Apple Red, Viper Blue
Style: High-back with headrest and sliders
Dimensions: See figure 19.
Seat Cover Material: Vinyl; Black, Gray, Tan, or Brown
Armrests: Match seat cover material
User adjustable seat height from ground: 27.75-31.75 in. (70.49-80.65 cm)
User adjustable seat height from deck: See figure 19.
Brakes
Electronic regenerative braking and electromechanical disc brake
2-24 VDC motors
Rear Wheel Drive
Wheels
Aluminum alloy wheels in Black
4-position adjustable
Tiller Type
Weight
Total weight with batteries: w/two 12V, 100Ah batteries: 345 lbs. (156.4 kg)
Total weight without batteries: seat and rear shroud: 216 lbs. (97.98 kg)
Component Breakdown:
Rear Plastic Shroud: 3.5 lbs. (1.59 kg)
Seat: 37 lbs. (16.78 kg)
Batteries: 63 lbs. (28.58 kg) each
2
Ground Clearance
See figure 19.
1
Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire condition. This
specification can be subject to a variance of (+ or -) 10%.
2
3
Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of
(+ or - ) 3%.
AGM or Gel-Cell type required. See IV. “Batteries and Charging.”
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 Series
EN12184 standards. All specifications subject to change without notice.
Wrangler
39
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
Wrangler
40
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
Wrangler
41
Download from Www.Somanuals.com. All Manuals Search And Download.
N O T E S
Wrangler
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
*I NFMANU1138*
Download from Www.Somanuals.com. All Manuals Search And Download.
|