Pride Mobility Motorcycle NFMANU2058 User Manual

MAXIMA

Download from Www.Somanuals.com. All Manuals Search And Download.

C O N T E N T S

INTRODUCTION .......................................................................................................................4

II. SAFETY ........................................................................................................................................5

III. YOUR SCOOTER ......................................................................................................................15

IV. BATTERIES AND CHARGING ..........................................................................................19

V. OPERATION .............................................................................................................................24

VI. COMFORT ADJUSTMENTS ..............................................................................................26

VII. DISASSEMBLY AND ASSEMBLY ...................................................................................29

VIII. BASIC TROUBLESHOOTING ..........................................................................................32

IX. CARE AND MAINTENANCE ..............................................................................................34

APPENDIX I - SPECIFICATIONS .............................................................................................38

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products (Pride). The scooter you have purchased combines state-of-the-

art components with safety, comfort, and styling in mind. We are confident that these design features will

provide you with the conveniences you expect during your daily activities. Once you understand how to

safely operate and care for your scooter, it should give you years of trouble free operation and service.

Read and follow all instructions, warnings, and notes in this manual and all other accompanying literature

before attempting to operate this product for the first time. In addition, your safety depends upon you, as

well as your provider, caregiver, or healthcare professional in using good judgment.

If there is any information in this manual which you do not understand or if you require additional assis-

tance for setup or operation, please contact your authorized Pride Provider. Failure to follow the instruc-

tions in this manual and those located on your scooter can lead to personal injury and/or damage to

the scooter, including voiding the warranty.

PURCHASER’S AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product

or remove or render inoperable or unsafe any guards, shields, or other safety features of this product; fail,

refuse, or neglect to install any retrofit kits from time to time provided by Pride to enhance or preserve the

safe use of this product.

SHIPPING AND DELIVERY

Before using your scooter, make sure your delivery is complete as some components may be individually

packaged. If you do not receive a complete delivery, please contact your authorized Pride Provider imme-

diately. Where damage has occurred during transport, either to the packaging or content, please contact

the delivery company responsible.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear

about the safety and reliability of your new scooter and about the service you received from your authorized

Pride Provider. Please notify us of any change of address, so we can keep you apprised of important informa-

tion about safety, new products, and new options that can increase your ability to use and enjoy your scooter.

Please feel free to contact us at the address below:

USA:

Canada:

Pride Mobility Products Company

380 Vansickle Road Unit 350

St. Catharines, Ontario L2R 6P7

1-888-570-1113

Pride Mobility Products Corporation

Attn.: Customer Care Department

182 Susquehanna Avenue

Exeter, PA 18643-2694

[email protected]

1-800-424-8205

NOTE: If you ever lose or misplace your product registration card or your copy of this manual, contact

us and we will be glad to send you a new one immediately.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I . S A F E T Y

PRODUCT SAFETY SYMBOLS

The symbols below are used on the scooter to identify warnings, mandatory actions, and prohibited

actions. It is very important for you to read and understand them completely.

Read and follow the information in the owner’s manual.

Removal of grounding prong can create electrical hazard. If necessary, properly

install an approved 3-pronged adapter to an electrical outlet having 2-pronged

plug access.

Do not connect an extension cord to the AC/DC converter or the battery charger.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I . S A F E T Y

GENERAL

MANDATORY! Do not operate your new scooter for the first time without completely

reading and understanding this owner’s manual.

Your scooter is a state-of-the-art life-enhancement device designed to increase mobility. Pride provides an

extensive variety of products to best fit the individual needs of the scooter user. Please be aware that the

final selection and purchasing decision regarding the type of scooter to be used is the responsibility of the

scooter user who is capable of making such a decision, and his/her healthcare professional (i.e., medical

doctor, physical therapist, etc.).

The contents of this manual are based on the expectation that a mobility device expert has properly fitted

the scooter to the user and has assisted the prescribing healthcare professional and/or the authorized Pride

Provider in the instruction process for the use of the product.

There are certain situations, including some medical conditions, where the scooter user will need to prac-

tice operating the scooter in the presence of a trained attendant. A trained attendant can be defined as a

family member or care professional specially trained in assisting a scooter user in various daily living

activities.

As you begin using your scooter during daily activities, you will probably encounter situations in which

you will need some practice. Simply take your time and you will soon be in full and confident control as

you maneuver through doorways, on and off lifts, up and down ramps, and over moderate terrain.

Below are some precautions, tips, and other safety considerations that will help you become accustomed

to operating the scooter safely.

MODIFICATIONS

Pride has designed and engineered your scooter to provide maximum mobility and utility. A wide range

of accessories is available from Pride to further customize your scooter to better suit your needs and/or

preferences. However, under no circumstances should you modify, add, remove, or disable any feature,

part, or function of your scooter.

WARNING! Do not modify your scooter in any way not authorized by Pride. Do not use

accessories if they have not been tested or approved for Pride products.

REMOVABLE PARTS

WARNING! Do not attempt to lift or move your scooter by any of its removable parts,

including the armrests, seat, or shroud.

PRE-RIDE SAFETY CHECK

Get to know the feel of your scooter and its capabilities. Pride recommends that you perform a safety check

before each use to make sure your scooter operates smoothly and safely.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I . S A F E T Y

Perform the following inspections prior to using your scooter:

ꢀ Check for proper tire inflation. Maintain but do not exceed the psi/bar/kPa air pressure rating indicated

on each tire if equipped with pneumatic tires.

ꢀ Check all electrical connections. Make sure they are tight and not corroded.

ꢀ Check all harness connections to the electronics tray. Make sure they are secured properly.

ꢀ Check the brakes. See IX. “Care and Maintenance.”

ꢀ Check battery charge. See IV. “Batteries and Charging.”

NOTE: If you discover a problem, contact your authorized Pride Provider for assistance.

WEIGHT LIMITATIONS

Your scooter is rated for a maximum weight capacity. Please refer to the specifications table for this limit. Keep

in mind that the maximum weight capacity includes the combined weight of the user and any accessories

mounted to the scooter.

MANDATORY! Stay within the specified weight capacity of your scooter. Exceeding the

weight capacity voids your warranty. Pride will not be held responsible for injuries and/

or property damage resulting from failure to observe weight limitations.

WARNING! Do not carry passengers on your scooter. Carrying passengers on your

scooter may affect the center of gravity, resulting in a tip or a fall.

TIRE INFLATION

If your scooter is equipped with pneumatic tires, you should check or have the air pressure checked at least

once a week. Proper inflation pressures will prolong the life of your tires and help ensure the smooth

operation of your scooter.

WARNING! It is critically important that the psi/bar/kPa air pressure rating indicated on

the tire be maintained in pneumatic tires at all times. Do not underinflate or overinflate

your tires. Low pressure may result in loss of control, and overinflated tires may burst.

Failure to maintain the psi/bar/kPa air pressure rating indicated on pneumatic tires at all

times may result in tire and/or wheel failure.

WARNING! Inflate your scooter tires from a regulated air source with an available

pressure gauge. Inflating your tires from an unregulated air source could overinflate

them, resulting in a burst tire.

NOTE: If the tires on your scooter list the psi rating only, use the following conversion formulas to

find the bar or kPa rating: bar = psi x 0.06895; kPa = psi x 6.89476.

INCLINE INFORMATION

More and more buildings have ramps with specified degrees of inclination, designed for easy and safe

access. Some ramps may have turning switchbacks (180-degree turns) that require you to have good cor-

nering skills on your scooter.

ꢀ Proceed with extreme caution as you approach the downgrade of a ramp or other incline.

ꢀ Take wide swings with your scooter’s front wheel(s) around any tight corners. If you do that, the

scooter’s rear wheels will follow a wide arc, not cut the corner short and not bump into or get hung up

on any railing corners.

ꢀ When driving down a ramp, keep the scooter’s speed adjustment set to the slowest speed setting to

ensure a safely controlled descent.

ꢀ Avoid sudden stops and starts.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I . S A F E T Y

When climbing an incline, try to keep your scooter moving. If you must stop, start up again slowly and

then accelerate cautiously. When driving down an incline, do so by setting the speed adjustment dial to the

slowest setting and driving in the forward direction only. If your scooter starts to move down the incline

faster than you anticipated or desired, allow it to come to a complete stop by releasing the throttle control

lever. Then push the throttle control lever forward slightly to ensure a safely controlled descent.

WARNING! When on any sort of an incline or decline, never place the scooter in freewheel

mode, especially while seated on it or standing next to it.

WARNING! When climbing an incline, do not zigzag or drive at an angle up the face of the

incline. Drive your scooter straight up the incline. This greatly reduces the possibility of

a tip or a fall. Always exercise extreme caution when negotiating an incline.

WARNING! Do not drive your scooter across the side of an incline or diagonally up or

down an incline; do not stop, if possible, while driving up or down an incline.

WARNING! You should not travel up or down a potentially hazardous incline (i.e., areas

covered with snow, ice, cut grass, or wet leaves).

WARNING! Even though your scooter is capable of climbing slopes greater than those

listed in the product specifications, do not, under any circumstances, exceed the incline

guidelines or any other specifications. Doing so could cause instability in your scooter.

Handicap public access ramps are not subject to government regulation in all countries, and therefore do

not necessarily share the same standard percent of slope. Other inclines may be natural or, if man-made,

not designed specifically for scooters.

Tests were conducted with the scooter’s seat in the highest position and adjusted rearward on the seat base

to its farthest rearward position. Use the specification information as a guideline. Your scooter’s ability to

travel up inclines is affected by your weight, your scooter’s speed, your angle of approach to the incline,

and your scooter setup.

WARNING! Any attempt to climb or descend a slope steeper than what is listed in the

product specifications may put your scooter in an unstable position and cause it to tip.

WARNING! Never carry an oxygen tank weighing more than 15 lbs. (6.8 kg). Never fill the

front or rear basket with contents exceeding 15 lbs. (6.8 kg).

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I . S A F E T Y

When you approach an incline, it is best to lean forward. See figures 1 and 2. This shifts the center of

gravity of you and your scooter toward the front of the scooter for improved stability.

NOTE: When negotiating ramps, if the throttle control lever is released while moving forward, the

powered scooter may "rollback" approximately 1 foot (30.5 cm) before the brake engages. If the throttle

control lever is released while moving in reverse, the powered scooter may "rollback" approximately 3

feet (1 meter) before the brake engages.

Figure 1. Normal Driving Position

Figure 2. Increased Stability Driving Position

CORNERING INFORMATION

Excessively high cornering speeds can create the possibility of tipping. Factors which affect the possibility

of tipping include, but are not limited to, cornering speed, steering angle (how sharply you are turning),

uneven road surfaces, inclined road surfaces, riding from an area of low traction to an area of high traction

(such as passing from a grassy area to a paved area – especially at high speed while turning), and abrupt

directional changes. High cornering speeds are not recommended. If you feel that you may tip over in a

corner, reduce your speed and steering angle (i.e., lessen the sharpness of the turn) to prevent your scooter

from tipping.

WARNING! When cornering sharply, reduce your speed and maintain a stable center of

gravity. When using your scooter at higher speeds, do not corner sharply. This greatly

reduces the possibility of a tip or fall.

BRAKING INFORMATION

Your scooter is equipped with two powerful brake systems:

ꢀ Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control lever returns to the

center/stop position.

ꢀ Disc Park Brake: Activates mechanically after regenerative braking slows the vehicle to near stop or

when power is removed from the system for any reason.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I . S A F E T Y

OUTDOOR DRIVING SURFACES

Your scooter is designed to provide optimum stability under normal driving conditions—dry, level sur-

faces composed of concrete, blacktop, or asphalt. However, Pride recognizes that there will be times when

you will encounter other surface types. For this reason, your scooter is designed to perform admirably on

packed soil, grass, and gravel. Feel free to use your scooter safely on lawns and in park areas.

ꢀ Avoid driving on uneven terrain and/or soft surfaces.

ꢀ Avoid tall grass that can become tangled in the running gear.

ꢀ Avoid loosely packed gravel and sand.

ꢀ Do not use your scooter in fresh or salt water.

ꢀ Do not use your scooter at the edge of a stream, lake, or ocean.

ꢀ If you feel unsure about a driving surface, avoid that surface.

PUBLIC STREETS AND ROADWAYS

WARNING! You should not operate your scooter on public streets and roadways. Be

aware that it may be difficult for traffic to see you when you are seated on your scooter.

Obey all local pedestrian traffic rules. Wait until your path is clear of traffic, and then

proceed with extreme caution.

STATIONARY OBSTACLES (STEPS, CURBS, ETC.)

WARNING! Do not drive near raised surfaces, unprotected ledges, and/or drop-offs (curbs,

porches, stairs, etc.).

WARNING! Do not attempt to have your scooter climb or descend an obstacle that is

inordinately high.

WARNING! Do not attempt to have your scooter proceed backward down any step, curb,

or other obstacle. This may cause the scooter to tip.

WARNING! Be sure your scooter is traveling perpendicular to any curb you may be

required to ascend or descend. See figures 3 and 4.

WARNING! Even though your scooter may be capable of handling greater obstacles, Pride

recommends that you do not attempt to negotiate a curb that has a height greater than

2 in. (5 cm). Doing so could cause instability in your scooter.

Figure 3. Correct Curb Approach

Figure 4. Incorrect Curb Approach

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I . S A F E T Y

INCLEMENT WEATHER PRECAUTIONS

Exposure of your scooter to inclement weather conditions should be avoided whenever possible. If sud-

denly caught up in rain, snow, severe cold or heat while operating your scooter proceed to shelter at the

earliest opportunity. Thoroughly dry your scooter before storing, charging, or operating your scooter.

PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy/slippery

surfaces can cause damage to the scooter and electrical system. Maintain and store

your scooter in a dry and clean condition.

WARNING! Prolonged exposure to hot or cold conditions may affect the temperature of

upholstered and non-upholstered items on the scooter, possibly resulting in skin

irritation. Exercise caution when using your scooter in extremely hot or cold conditions

or when exposing your scooter to direct sunlight for prolonged periods of time.

FREEWHEEL MODE

Your scooter is equipped with a manual freewheel lever that, when engaged, allows the scooter to be

pushed. For more information about how to place your scooter into and out of freewheel mode, see III.

“Your Scooter.”

WARNING! When your scooter is in freewheel mode, the braking system is disengaged.

ꢀ

Disengage the drive motors only on a level surface.

Ensure the key is removed from the key switch.

Stand behind the scooter to engage or disengage freewheel mode. Never sit on a

scooter to do this.

ꢀ

After you have finished pushing your scooter, always return it to the drive mode

to lock the brakes.

An added feature built into the scooter is “push-too-fast” protection which safeguards the scooter against

gaining excessive speed while in freewheel mode.

“Push-too-fast” operates differently depending on which of two conditions exists:

ꢀ If the key is switched “off” when in freewheel mode, the scooter’s controller activates regenerative

braking when the scooter is pushed faster than a maximum threshold which has been preprogrammed.

In this case, the controller is acting as a speed governor.

ꢀ If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any

speed. This prevents the scooter from gaining unwanted momentum should the manual freewheel lever

inadvertently be released while driving the scooter.

STAIRS AND ESCALATORS

Scooters are not designed to travel up or down stairs or escalators. Always use an elevator.

WARNING! Do not use your scooter to negotiate steps or escalators.

DOORS

ꢀ Determine if the door opens toward or away from you.

ꢀ Use your hand to turn the knob or push the handle or push-bar.

ꢀ Drive your scooter gently and slowly forward to push the door open. Or drive your scooter gently and

slowly backwards to pull the door open.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I . S A F E T Y

ELEVATORS

Modern elevators have a door edge safety mechanism that, when pushed, reopens the elevator door(s).

ꢀ If you are in the doorway of an elevator when the door(s) begin to close, push on the rubber door edge

or allow the rubber door edge to contact the scooter and the door will reopen.

ꢀ Use care that pocketbooks, packages, or scooter accessories do not become caught in elevator doors.

NOTE: If your scooter’s turning radius is greater than 60 in. (152.4 cm), it may be difficult to maneuver

in elevators and building entrances. Use caution when attempting to turn or maneuver your scooter in

small spaces, and avoid areas that might pose a problem.

LIFT/ELEVATION PRODUCTS

If you will be transporting your scooter during travel, you may find it necessary to use a vehicle-mounted

lift system or elevation product to aid in transportation. Pride recommends that you closely review the

warnings, instructions, specifications, and safety information set forth by the manufacturer of the lift/

elevation product before using that product.

WARNING! Not all lift systems/elevation products are rated for use with an occupied

mobility device. Pride recommends that you do not remain seated in your scooter when

it is being used in connection with any type of lift system/elevation product unless:

ꢀ

That product is rated for occupied use by the manufacturer.

You are able to occupy your mobility device in strict conformity with the warnings,

instructions, specifications, and safety guidelines set forth by the manufacturer.

WARNING! Always turn off the power to the unit when you are being transferred via an

elevation product. Failure to do so may result in accidental throttle control lever contact,

resulting in unintended movement and personal injury or product damage.

BATTERIES

In addition to following the warnings below, be sure to comply with all other battery handling information.

MANDATORY! Battery posts, terminals, and related accessories contain lead and lead

compounds. Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Scooter batteries are heavy. See specifications table. If you are unable to lift

that much weight, be sure to get help. Use proper lifting techniques and avoid lifting

beyond your capacity.

WARNING! Always protect the batteries from freezing and never charge a frozen battery.

Charging a frozen battery may result in damage to the battery.

WARNING! Connect the battery harnesses in the proper manner. RED (+) cables must be

connected to positive (+) battery terminals/posts. BLACK (-) cables must be connected

to negative (-) battery terminals/posts. Protective caps should be installed over all

battery terminals. REPLACE cables immediately if damaged.

BATTERY DISPOSAL AND RECYCLING

If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and call your

authorized Pride Provider for instructions on disposal. Your authorized Pride Provider will also have the

necessary information on battery recycling, which is our recommended course of action.

PREVENTING UNINTENDED MOVEMENT

WARNING! If you anticipate being seated in a stationary position for an extended period

of time, turn off the power. This will prevent unexpected motion from inadvertent throttle

control lever contact.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I . S A F E T Y

MOTOR VEHICLE TRANSPORT

Pride recommends that you do not remain seated in your scooter while traveling in a motor vehicle. The

scooter should be stowed in the trunk of a car or in the back of a truck or van with batteries removed and

properly secured. In addition, all removable scooter parts, including the armrests, seat, and shroud should

be removed and/or properly secured during motor vehicle transport.

WARNING! Although your scooter may be equipped with a positioning belt, this belt is not

designed to provide proper restraint during motor vehicle transport. Anyone traveling in

a motor vehicle should be properly secured in the motor vehicle seat with safety belts

fastened securely.

WARNING! Do not sit on your scooter while it is in a moving vehicle.

WARNING! Always be sure your scooter and its batteries are properly secured when it is

being transported. Batteries should be secured in an upright position and protective caps

should be installed on the battery terminals. Batteries should not be transported with any

flammable or combustible items.

POSITIONING BELTS

Your authorized Pride Provider, therapist(s), and other healthcare professionals are responsible for deter-

mining your requirement for a positioning belt in order to operate your scooter safely.

WARNING! If you require a positioning belt to safely operate your scooter, make sure it

is fastened securely in order to reduce the possibility of a fall from the scooter.

GETTING ONTO AND OFF OF YOUR SCOOTER

Getting onto and off of your scooter requires a good sense of balance. Please observe the following safety

tips when getting onto and off of your scooter:

ꢀ Remove the key from the key switch.

ꢀ Ensure that your scooter is not in freewheel mode. See III. “Your Scooter.”

ꢀ Make certain that the seat is fixed into place.

ꢀ Flip up the seat armrests to make getting on and off the scooter easier.

WARNING! Position yourself as far back as possible in the scooter seat to prevent the

scooter from tipping.

WARNING! Avoid putting all your weight on the scooter armrests and do not use the

armrests for weight bearing purposes, such as transfers. Such use may cause the

scooter to tip, resulting in a fall from the scooter and/or personal injury.

WARNING! Avoid putting all of your weight on the floorboard. Such use may cause the

scooter to tip.

REACHING AND BENDING

Avoid reaching or bending while driving your scooter. Bending forward creates the risk of accidental

throttle control lever contact. Bending to the side while seated creates the risk of tipping. It is important to

maintain a stable center of gravity and keep the scooter from tipping. Pride recommends that the scooter

user determine his/her personal limitations and practice bending and reaching in the presence of a qualified

attendant.

WARNING! Do not bend, lean, or reach for objects if you have to pick them up from the

scooter deck or from either side of the scooter. Movements such as these may change your

center of gravity and the weight distribution of the scooter and cause your scooter to tip.

PROHIBITED! Keep your hands away from the tires when driving. Be aware that loose

fitting clothing can become caught in drive tires.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I . S A F E T Y

PRESCRIPTION DRUGS/PHYSICAL LIMITATIONS

The scooter user must exercise care and common sense when operating his/her scooter. This includes

awareness of safety issues when taking prescribed or over-the-counter drugs or when the user has specific

physical limitations.

WARNING! Consult your physician if you are taking prescribed or over-the-counter

medication or if you have certain physical limitations. Some medications and limitations

may impair your ability to operate your scooter in a safe manner.

ALCOHOL/SMOKING

The scooter user must exercise care and common sense when operating his/her scooter. This includes

awareness of safety issues while under the influence of alcohol or while smoking.

WARNING! Do not operate your scooter while you are under the influence of alcohol, as

this may impair your ability to operate the scooter in a safe manner.

WARNING! Pride strongly recommends that you do not smoke cigarettes while seated on

your scooter, although the scooter seat has passed the necessary testing requirements

for cigarette smoking. You must adhere to the following safety guidelines if you decide

to smoke cigarettes while seated on your scooter.

ꢀ Do not leave lit cigarettes unattended.

ꢀ Keep ashtrays a safe distance from the seat cushions.

ꢀ Always make sure cigarettes are completely extinguished before disposal.

ELECTROMAGNETIC AND RADIO FREQUENCY INTERFERENCE (EMI/RFI)

WARNING! Laboratory tests have shown that electromagnetic and radio frequency

waves can have an adverse affect on the performance of electrically-powered mobility

vehicles.

Electromagnetic and Radio Frequency Interference can come from sources such as cellular phones, mobile

two-way radios (such as walkie-talkies), radio stations, TV stations, amateur radio (HAM) transmitters,

wireless computer links, microwave signals, paging transmitters, and medium-range mobile transceivers

used by emergency vehicles. In some cases, these waves can cause unintended movement or damage to

the control system. Every electrically-powered mobility vehicle has an immunity (or resistance) to EMI.

The higher the immunity level, the greater the protection against EMI. This product has been tested and

has passed at an immunity level of 20 V/M.

WARNING! Be aware that cell phones, two-way radios, laptops, and other types of radio

transmitters may cause unintended movement of your electrically-powered mobility

vehicle due to EMI. Exercise caution when using any of these items while operating your

mobility vehicle and avoid coming into close proximity of radio and TV stations.

WARNING! The addition of accessories or components to the electrically-powered

mobility vehicle can increase the susceptibility of the vehicle to EMI. Do not modify your

scooter in any way not authorized by Pride.

WARNING! The electrically-powered mobility vehicle itself can disturb the performance

of other electrical devices located nearby, such as alarm systems.

NOTE: For further information on EMI/RFI, visit the Resource Center on www.pridemobility.com. If

unintended motion or brake release occurs, turn your scooter off as soon as it is safe to do so. Contact

your authorized Pride Provider to report the incident.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I I . Y O U R S C O O T E R

CONTROL CONSOLE ASSEMBLY

The control console assembly houses all of the controls you need to drive your scooter, including the key

switch, speed adjustment dial, status LED, throttle control lever, battery condition meter, horn buttons,

light switch, turn signal buttons, off-board charger port, and the hazard lights switch. See figure 5.

PROHIBITED! Do not expose the control console assembly to moisture. In the event that

the control console assembly does become exposed to moisture, do not attempt to

operate your scooter until the control console assembly has dried thoroughly.

BATTERY CONDITION METER

SPEED ADJUSTMENT DIAL

STATUS LED

KEY

RIGHT TURN SIGNAL BUTTON

KEY SWITCH

LEFT TURN SIGNAL BUTTON

HAZARD

LIGHTS

SWITCH

LIGHT

SWITCH

HORN BUTTON

THROTTLE CONTROL LEVER (REVERSE)

THROTTLE CONTROL LEVER (FORWARD)

OFF-BOARD CHARGER PORT

Figure 5. Control Console Assembly

Key Switch

ꢀ Fully insert the key into the key switch and turn it clockwise to power up (turn on) your scooter.

ꢀ Turn the key counterclockwise to power down (turn off) your scooter.

WARNING! If the key is moved to the “off” position while your scooter is in motion, the

electronic brakes engage and your scooter comes to an abrupt stop!

Speed Adjustment Dial

This adjustment dial enables you to preselect and limit your scooter’s top speed.

ꢀ The image of the tortoise represents the slowest speed setting.

ꢀ The image of the hare represents the fastest speed setting.

Status LED

The Status LED alerts you to electrical problems that may occur with the scooter. The LED remains

constantly lit while your scooter is on. If the scooter develops an electrical problem, the status LED will

flash a code. See VIII. “Basic Troubleshooting” for troubleshooting flash codes.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I I . Y O U R S C O O T E R

Throttle Control Lever

This lever allows you to control the forward speed and the reverse speed of your scooter up to the maxi-

mum speed you preset with the speed adjustment dial.

ꢀ Place your right hand on the right handgrip and your left hand on the left handgrip.

ꢀ Use your right thumb to push the right side of the lever to disengage your scooter’s brakes and move

forward.

ꢀ Release the lever and allow your scooter to come to a complete stop before pushing the other side of

the lever to move in reverse.

ꢀ When the throttle control lever is completely released, it automatically returns to the center “stop”

position and engages your scooter’s brakes.

Battery Condition Meter

When the key is fully inserted and turned clockwise to power up your scooter, this meter indicates the

approximate battery voltage strength. For further information on battery charging, see IV. “Batteries and

Charging.”

Horn Buttons

These buttons activate a warning horn.

ꢀ The key must be inserted and turned clockwise for the horn to be operational.

ꢀ Do not hesitate to use the warning horn when its use could prevent accident or injury.

Light Switch

This switch controls your scooter’s lighting system. Toggle this switch to turn on and turn off the lights.

WARNING! Scooter users are required to use their lights when visibility is restricted—day

or night.

Turn Signal Buttons

Use these buttons to turn on the left and right turn signal lights.

ꢀ Press the appropriate turn signal button once to activate it.

ꢀ Your scooter’s turn signals are timed to shut off automatically.

Hazard Lights Switch

This switch activates the 4-way flashers on your scooter. Toggle this switch to turn on and turn off the

lights.

Off-board Charger Port

The scooter’s off-board charger plugs into this port.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I I I . Y O U R S C O O T E R

REAR SECTION

The manual freewheel lever, the anti-tip wheels, the motor/transaxle assembly (not shown), the electronics

module, the batteries (not shown), the main circuit breaker (reset button), and the fuses are located on the

rear section of your scooter. See figure 6. Refer to VII. “Disassembly and Assembly” for instructions on

removing the rear shroud.

RIGHT RUNNING

STORAGE COMPARTMENT

LIGHT FUSE

RIGHT TURN

SIGNAL FUSE

RIGHT RUNNING LIGHT

BULB

ELECTRONICS MODULE

(REMOVE REAR SHROUD TO

VIEW ENTIRE MODULE)

RIGHT TURN SIG-

NAL LIGHT BULB

LIGHT COVER

MANUAL FREEWHEEL LEVER

MAIN CIRCUIT BREAKER

(RESET BUTTON)

ANTI-TIP WHEEL

FUSES

Figure 6. Rear Section

Manual Freewheel Lever

Whenever you need or want to push your scooter for short distances, you can put it in freewheel mode.

1. Pull up firmly on the manual freewheel lever to disable the drive system and the brake system.

2. You may push your scooter.

3. Push down firmly on the manual freewheel lever to reengage the drive system and the brake system

and take your scooter out of freewheel mode.

WARNING! When your scooter is in freewheel mode, the braking system is disengaged.

ꢀ Disengage the drive motors only on a level surface.

ꢀ Ensure the key is removed from the key switch.

ꢀ Stand to the side of the scooter to engage or disengage freewheel mode. Never sit on

a scooter to do this.

ꢀ After you have finished pushing your scooter, always return it to the drive mode to

lock the brakes.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I I I . Y O U R S C O O T E R

Anti-tip Wheels

The front (not shown) and rear anti-tip wheels are an integral and important safety feature of your scooter.

They are bolted to the frame at the front and rear of the scooter.

PROHIBITED! Do not remove the anti-tip wheels or modify your scooter in any way that

is not authorized by Pride.

Motor/Transaxle Assembly (Not Shown)

The motor/transaxle assembly is the electromechanical unit that converts the electrical energy of your

scooter’s batteries into the controlled mechanical energy that drives the scooter’s wheels.

Electronics Module

The electronics module houses all of the scooter’s harness mating plugs and electronic components for

charging the batteries.

Batteries (Not Shown)

The batteries store the electrical energy that powers your scooter. See IV. “Batteries and Charging.”

Main Circuit Breaker (Reset Button)

When the voltage in your scooter’s batteries becomes low or your scooter is heavily strained because of

excessive loads or steep inclines, the main circuit breaker may trip to protect your scooter’s motor and

electronics from damage.

ꢀ The main circuit breaker reset button pops out when the breaker trips.

ꢀ When the breaker trips, the entire electrical system of your scooter shuts down.

ꢀ Allow a minute or two for your scooter’s electronics to “rest.”

ꢀ Push in the reset button to reset the breaker.

ꢀ If the breaker trips frequently, you may need to charge your batteries more often. You may also need

to have your authorized Pride Provider perform a load test on your scooter’s batteries.

ꢀ If the main circuit breaker trips repeatedly, see your authorized Pride Provider for service.

Fuses

The fuses help protect your scooter’s lighting, control console assembly, and charging systems from

receiving an overload of electrical current. The fuses used in the scooter are the same type automobiles

use.

If a fuse must be replaced, use only the specified amp fuse. See IX. “Care and Maintenance.”

Docking Device Assembly

Your scooter is equipped with a docking device assem-

bly. See figure 7. In order to utilize the docking device, it

is necessary to purchase an insert (T-bar or Bullnose and

DOCKING

DEVICE

C-arm) that, when used with the lift system, will aid in

lifting your scooter.

Contact your authorized Pride Provider for more informa-

tion about the docking device.

Figure 7. Docking Device Assembly

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I V . B A T T E R I E S A N D C H A R G I N G

BATTERIES AND CHARGING

Your scooter requires two long-lasting, 12-volt, deep-cycle batteries that are sealed and maintenance free.

They are recharged by an off-board charging system.

ꢀ Charge your scooter’s batteries prior to using it for the first time.

ꢀ Keep the batteries fully charged to keep your scooter running smoothly.

READING YOUR BATTERY VOLTAGE

The battery condition meter on the control console assembly indicates the

approximate strength of your batteries using a color code. From right to left,

green indicates fully charged batteries, yellow indicates a draining charge,

and red indicates that an immediate recharge is necessary. See figure 8. To

ensure the highest accuracy, the battery condition meter should be checked

while operating your scooter at full speed on a dry, level surface.

CHARGING YOUR BATTERIES

Figure 8. Battery Condition

Meter

PROHIBITED! Never use an extension cord to plug in

your battery charger. Plug the charger directly into a

properly wired standard electrical outlet.

PROHIBITED! Removal of grounding prong can create electrical hazard. If necessary,

properly install an approved 3-pronged adapter to an electrical outlet having 2-pronged

plug access.

PROHIBITED! Do not allow unsupervised children to play near the scooter while the

batteries are charging. Pride recommends that you do not charge the batteries while the

scooter is occupied.

MANDATORY! Read the battery charging instructions in this manual and in the manual

supplied with the battery charger before charging the batteries.

WARNING! Explosive gases may be generated while charging the batteries. Keep the

scooter and battery charger away from sources of ignition such as flames or sparks and

provide adequate ventilation when charging the batteries.

WARNING! Ensure that both ends of the charger power cord are clean and dry before

plugging the charger power cord into the off-board charger port or the electrical outlet.

WARNING! Inspect the battery charger, wiring, and connectors for damage before each

use. Contact your authorized Pride Provider if damage is found.

WARNING! Do not attempt to open the battery charger case. If the battery charger does

not appear to be working correctly, contact your authorized Pride Provider.

WARNING! If the off-board battery charger is equipped with cooling slots, then do not

attempt to insert objects through these slots.

WARNING! If your battery charger has not been tested and approved for outdoor use,

then do not expose it to adverse or extreme weather conditions. If the battery charger

is exposed to adverse or extreme weather conditions, then it must be allowed to adjust

to the difference in environmental conditions before use indoors. Refer to the manual

supplied with the battery charger for more information.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I V . B A T T E R I E S A N D C H A R G I N G

Follow these easy steps to charge your batteries

safely:

1. Position your scooter close to a standard electri-

PLUGS INTO THE OFF-BOARD CHARGER PORT

cal outlet.

PLUGS INTO ELECTRICAL OUTLET

2. Remove the key from the key switch.

3. Make certain that the manual freewheel lever is

in the drive (down) position.

4. Plug the 3-pin charger power cord into the off-

board charger port. See figures 5 and 9.

5. Extend the charger power cord and plug it into

the electrical outlet. We recommend that you

charge the batteries for 8 to 14 hours.

6. When the batteries are fully charged, unplug the

charger power cord from the electrical outlet

and then from the off-board charger port.

Figure 9. Off-board Charger

NOTE: The LED lights on the charger indicate different charger conditions at various times: charger

power on, charging in progress, and charging complete. Refer to the manual supplied with the charger

for a complete explanation of these indicators.

NOTE: There is a charger inhibit function on your scooter. The scooter will not run and the battery

condition meter will not operate while the batteries are charging.

FREQUENTLY ASKED QUESTIONS

How does the charger work?

When your scooter’s battery voltage is low, the charger works harder and sends more electrical current to

the batteries to bring up their charge. As the voltage of the batteries approaches a full charge, the charger

sends less and less electrical current to the batteries. When the batteries are fully charged, the current sent

to them from the charger is at nearly zero amperage. Therefore, when the charger is plugged in, it maintains

the charge on your scooter’s batteries, but does not overcharge them. Refer to the manual supplied with

the battery charger for charging instructions.

What if my scooter’s batteries won’t charge?

ꢀ Ensure the red (+) and black (-) battery cables are connected properly to the battery terminals.

ꢀ Ensure both battery harnesses that extend from the batteries are plugged into their mating harness

leading to the charger.

ꢀ Ensure both ends of the charger power cord are inserted fully.

Can I use a different charger?

Chargers are selected precisely for particular applications and are especially matched to the type, size, and

chemical formulation of specific batteries. For the safest and most efficient charging of your scooter’s

batteries, we recommend use of the charger supplied as original equipment with your Pride product only.

Any charging method resulting in batteries being charged individually is especially prohibited.

How often must I charge the batteries?

Two major factors must be considered when deciding how often to charge your scooter’s batteries:

ꢀ All day scooter use on a daily basis.

ꢀ Infrequent or sporadic scooter use.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I V . B A T T E R I E S A N D C H A R G I N G

With these considerations in mind, you can determine just how often and for how long you should charge

your scooter’s batteries. We designed the battery charger so that it will not overcharge your scooter’s

batteries (do not charge them for more than 24 consecutive hours). However, you may encounter some

problems if you do not charge your batteries often enough and if you do not charge them on a regular basis.

Following the five guidelines below will provide safe and reliable battery operation and charging.

ꢀ If you use your scooter daily, charge its batteries as soon as you finish using it for the day. Your scooter

will be ready each morning. We recommend that you charge your scooter’s batteries for 8 to 14 hours

after daily use.

ꢀ If you use your scooter once a week or less, charge its batteries at least once a week for 12 to 14 hours

at a time.

ꢀ Keep your scooter’s batteries fully charged.

ꢀ Avoid deeply discharging your scooter’s batteries.

How can I get maximum range or distance per charge?

Rarely will you have ideal driving conditions—smooth, flat, hard driving surfaces with no wind or curves.

You will often face hills, sidewalk cracks, uneven and loosely packed surfaces, curves, and wind. All of

these driving conditions affect the distance or running time per battery charge. Below are a few suggestions

for obtaining the maximum range per battery charge.

ꢀ Always fully charge your scooter’s batteries prior to your daily use.

ꢀ Maintain but do not exceed the psi/bar/kPa air pressure rating indicated on pneumatic tires.

ꢀ Plan your route ahead to avoid as many hills, cracked, broken, or soft surfaces as possible.

ꢀ Limit your baggage weight to essential items.

ꢀ Try to maintain an even speed while your scooter is in motion.

ꢀ Avoid stop-and-go driving.

What type and size of battery should I use?

We recommend deep-cycle batteries that are sealed and maintenance free. Both AGM and Gel-Cell are deep-

cycle batteries that are similar in performance. Do not use wet-cell batteries, which have removable caps.

WARNING! Corrosive chemicals are contained in batteries. Use only AGM or Gel-Cell

batteries to reduce the risk of leakage or explosive conditions.

NOTE: Sealed batteries are not serviceable. Do not remove the caps.

How do I change a battery in my scooter?

Your scooter requires two 12-volt, deep cycle, U-1 (31-36 Ah) batteries that are sealed and maintenance

free. Only sealed, non-spillable batteries that meet DOT CRF 173.159 should be used with your scooter.

Replacement batteries should be obtained from your authorized Pride Provider to ensure proper conform-

ability, fit, and function.

MANDATORY! Battery posts, terminals, and related accessories contain lead and lead

compounds. Wear goggles and gloves when handling batteries and wash hands after

handling.

WARNING! Always use two batteries of the exact same type, chemistry, and amp-hour

(Ah) capacity. Refer to the specifications table in this manual and in the manual supplied

with the battery charger for recommended type and capacities.

WARNING! Contact your authorized Pride Provider if you have any questions regarding

the batteries in your scooter.

WARNING! Do not replace the batteries while the scooter is occupied.

WARNING! The batteries on your scooter should only be serviced or replaced by an

authorized Pride Provider or a qualified technician.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I V . B A T T E R I E S A N D C H A R G I N G

PROHIBITED! Keep tools and other metal objects away from the battery terminals. Con-

tact with tools can cause electrical shock.

You may need the following to change your batteries:

ꢀ metric/standard socket set and ratchet

ꢀ adjustable wrench

To change the batteries in your scooter:

1. Remove the seat and the rear shroud. See VII. “Disassembly and Assembly.”

2. Disconnect the battery tie-down straps.

3. Disconnect the battery harnesses from the rear electronics module.

4. Disconnect the battery cables from the battery terminals.

5. Remove the old battery.

6. Place a new battery in the battery well.

7. Connect the red battery cable to the positive (+) battery terminal.

8. Connect the black battery cable to the negative (-) battery terminal.

9. Reconnect the battery harnesses to the rear electronics module.

10. Reconnect the battery tie-down straps.

11. Reinstall the rear shroud and the seat.

NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag and

contact your local waste disposal agency or your authorized Pride Provider for instructions on disposal

and battery recycling, which is our recommended course of action.

Why do my new batteries seem weak?

Deep-cycle batteries employ a different chemical technology than is used in car batteries, nickel-cadmium

batteries (nicads), or in other common battery types. Deep-cycle batteries are specifically designed to

provide power, drain down their charge, and then accept a relatively quick recharge.

We work closely with our battery manufacturer to provide batteries that best suit your scooter’s specific

electrical demands. Fresh batteries arrive daily at Pride and are shipped fully charged to our customers.

During shipping, the batteries may encounter temperature extremes that may influence their initial perfor-

mance. Heat diminishes the charge on the battery; cold slows the available power and extends the time

needed to recharge the battery.

It may take a few days for the temperature of your scooter’s batteries to stabilize and adjust to their new

room or ambient temperature. More importantly, it takes a few charging cycles (a partial drain followed

by a full recharge) to establish the critical chemical balance that is essential to a deep-cycle battery’s peak

performance and long life.

Follow these steps to properly break in your scooter’s new batteries for maximum efficiency and ser-

vice life:

1. Fully recharge any new battery prior to its initial use. This charging cycle brings the battery up to about

88% of its peak performance level.

2. Operate your new scooter in familiar and safe areas. Drive slowly at first and do not travel too far from

your home or familiar surroundings until you have become accustomed to your scooter’s controls and

have properly broken in your scooter’s batteries.

3. Fully recharge the batteries. They should be at over 90% of their peak performance level.

4. Operate your scooter again.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I V . B A T T E R I E S A N D C H A R G I N G

How can I ensure maximum battery life?

Fully charged deep-cycle batteries provide reliable performance and extended battery life. Keep your

scooter’s batteries fully charged whenever possible. Batteries that are regularly and deeply discharged,

infrequently charged, or stored without a full charge may be permanently damaged, causing unreliable

performance and limited service life.

What about public transportation?

If you intend to use public transport with your scooter, you must contact the transportation provider in

advance to determine their specific requirements.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

V . O P E R A T I O N

BEFORE GETTING ON YOUR SCOOTER

ꢀ Have you fully charged the batteries? See IV. “Batteries and Charging.”

ꢀ Is the manual freewheel lever in the drive (down) position? Never leave the manual freewheel lever

pulled up unless you are manually pushing your scooter.

GETTING ONTO YOUR SCOOTER

1. Make certain that the key is removed from the key switch.

WARNING! Never attempt to get onto or off your scooter without first removing the key

from the key switch. This will prevent the scooter from moving if accidental throttle

control lever contact is made.

2. Stand at the side of your scooter.

3. Push down on the seat rotation lever and rotate the seat until it is facing you.

4. Make certain that the seat is fixed securely in position.

5. Position yourself comfortably and securely in the seat.

6. Push down on the seat rotation lever and rotate the seat until you are facing forward.

7. Make certain that the seat is fixed securely in position.

8. Make certain that your feet are safely on the floorboard.

PRE-RIDE ADJUSTMENTS AND CHECKS

ꢀ Is the seat at the proper height?

ꢀ Is the seat fixed securely in place?

ꢀ Is the tiller at a comfortable setting and locked securely in place? See VI. “Comfort Adjustments.”

ꢀ Is the key fully inserted into the key switch and turned clockwise to the “on” position? See III. “Your Scooter.”

ꢀ Does the scooter’s horn work properly?

ꢀ Is your proposed path clear of people, pets, and obstacles?

ꢀ Have you planned your route to avoid adverse terrain and as many inclines as possible?

OPERATING YOUR SCOOTER

WARNING! The following can adversely affect steering and stability while operating your

scooter:

ꢀ Holding onto or attaching a leash to walk your pet

ꢀ Carrying passengers (including pets)

ꢀ Hanging any article from the tiller

ꢀ Towing or being pushed by another motorized vehicle

WARNING! Keep both hands on the tiller and your feet on the floorboard at all times while

operating your scooter. This driving position gives you the most control over your vehicle.

ꢀ Set the speed adjustment dial to your desired speed.

ꢀ Press your thumb against the appropriate side of the throttle control lever.

ꢀ The electromechanical disc park brake automatically disengages and the scooter accelerates smoothly

to the speed you preselected with the speed adjustment dial.

ꢀ Pull on the left handgrip to steer your scooter to the left.

ꢀ Pull on the right handgrip to steer your scooter to the right.

ꢀ Move the tiller to the center position to drive straight ahead.

ꢀ To stop, slowly release the throttle control lever. The electronic brakes will automatically engage when

your scooter comes to a stop.

NOTE: Your scooter’s reverse speed is slower then that of the forward speed you preset with the speed

adjustment dial.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

V . O P E R A T I O N

GETTING OFF OF YOUR SCOOTER

1. Bring your scooter to a complete stop.

2. Remove the key from the key switch.

3. Push down on the seat rotation lever and rotate the seat until you are facing toward the side of your scooter.

4. Make certain that the seat is fixed securely in position.

5. Carefully and safely get out of the seat and stand to the side of your scooter.

6. You can leave the seat facing to the side to facilitate boarding your scooter next time.

POWER DOWN TIMER FEATURE

Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve

your scooter’s battery life. If you mistakenly leave the key in the key switch and in the “on” position but

do not use your scooter for approximately 20 minutes, the scooter’s controller shuts down automatically.

Although the controller is shut down and the scooter will not move, power will still be supplied to the

scooter’s lighting system.

If the power down timer feature takes effect, perform the following steps to resume normal operation:

1. Turn the key to the “off” position.

2. Turn the key back to the “on” position.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

V I . C O M F O R T A D J U S T M E N T S

TILLER ANGLE ADJUSTMENT

WARNING! Remove the key from the key switch

before adjusting the tiller or the seat. Never

attempt to adjust the tiller or the seat while the

scooter is in motion.

Your scooter is equipped with a pivoting tiller that allows adjust-

ment to several positions.

1. Lift the tiller adjustment lever. See figure 10.

2. Move the tiller to a comfortable position.

3. Release the tiller adjustment lever to secure the tiller in

position.

TILLER

ADJUSTMENT

LEVER

SEAT ROTATION ADJUSTMENT

Figure 10. Tiller Adjustment Lever

The seat rotation lever secures the seat in one of four positions. See

figure 11.

SEAT ROTATION LEVER

SEAT BOLTS

1. Push the seat rotation lever down to disengage the seat.

2. Rotate the seat to the desired position.

3. Release the seat rotation lever to fix the seat securely in place.

FRONT-TO-BACK SEAT ADJUSTMENT

You can reposition the scooter’s seat forward or backward to one

of three settings to adjust the distance between the seat and the

tiller. See figure 11.

1. Remove the seat from your scooter. See VII. “Disassembly

and Assembly.”

2. Remove the four bolts that fasten the seat to the seat platform.

3. Align the seat platform with the desired set of holes on the seat.

4. Install the four bolts securely.

Figure 11. Seat Adjustments

ARMREST WIDTH ADJUSTMENT

The armrests can be adjusted inward or outward. See figure 12.

1. Loosen the armrest adjustment knobs at the back of the seat frame.

2. Slide the armrests in or out to the desired width.

3. Tighten the armrest adjustment knobs.

ARMREST

HEIGHT

ADJUSTING

SETSCREWS

The armrests also pivot upward to make getting onto and off of

your scooter easier.

ARMREST HEIGHT ADJUSTMENT

The height of both armrests can be adjusted upward or downward.

See figure 12.

ARMREST

KNOB

1. Loosen the two setscrews located on the armrest receiver.

2. Raise or lower the armrest to the desired height.

3. Tighten the setscrews to secure the armrest.

Figure 12. Armrest Adjustments

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

V I . C O M F O R T A D J U S T M E N T S

SEATBACK ADJUSTMENT

The seatback may be positioned to four differ-

ent angles: 90°, 100°, 102°, and 105°. See fig-

ure 13.

UPPER HINGE

To adjust the seatback angle:

1. Loosen and remove the adjustment screw

from the seatback hinge on both sides of

the seat.

2. Reposition the seatback to the desired

angle.

3. Align the adjustment holes from the upper

and lower hinge, so the adjustment screw

can easily pass through.

ADJUSTMENT SCREW

4. Reinsert both adjustment screws and

tighten.

LOWER HINGE

SEAT HEIGHT ADJUSTMENT

The seat can be repositioned to different

heights. See figure 14.

Figure 13. Seatback Hinge

1. Remove the seat and rear shroud from

your scooter. See VII. “Disassembly and

Assembly.”

2. Loosen the nut and remove it from the

bolt, and remove the bolt and washers

from the lower seat post.

3. Raise or lower the upper seat post to the

desired seat height.

4. While holding the upper seat post at that

height, match up the holes in the upper seat

post with those of the lower seat post.

5 Reinstall the bolt, washers, and nut to

secure the seat post.

UPPER SEAT POST

NUT

WASHER

NOTE: Ensure both washers have been rein-

stalled before fully tightening the nut.

BOLT

6. Reinstall the rear shroud and the seat.

LOWER SEAT POST

Figure 14. Seat Height Adjustment

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

V I . C O M F O R T A D J U S T M E N T S

POWER SEAT ADJUSTMENT

Your scooter may be equipped with a power seat. The power seat actuator is designed to raise or lower the

seat with minimal effort on the part of the operator. The power seat switch is located on the control console.

WARNING! The power seat is intended for operation only while your scooter is stationary

and on a level surface. Its purpose is to aid you in reaching objects. Drive your scooter

only with the power seat in the lowest position. Driving the scooter with the power seat

elevated could cause instability in the scooter, resulting in a tip or a fall.

Strict adherence to the following safety rules is vital to your safety:

ꢀ

Operate the power seat only while completely stationary on level ground.

Do not press the throttle control lever and the power seat switch at the same time.

Do not operate your scooter with the power seat elevated. Operate the scooter only

with the power seat fully retracted (in the lowest position).

Never place your scooter in freewheel mode with the power seat elevated.

Use extreme caution when reaching for objects with your power seat elevated. Do

not overextend or attempt to pick up objects that might affect your balance.

Do not attempt to raise or lower the seat while in motion.

ꢀ

Before operating the power seat, ensure your scooter is level and stationary and the speed adjustment dial

is set to the slowest setting.

To operate the power seat:

1. Press and hold the upper part of the power seat switch to raise the seat. Release the switch when you

have attained your desired height or upon reaching the highest position.

2. Press and hold the lower part of the power seat switch to lower the seat. Release the switch when you

have attained your desired height or upon reaching the lowest position.

NOTE: The scooter must be stopped in order for the power seat to be operated. If the power seat switch

is pressed while the scooter is in motion, the scooter will slow and come to a stop. The scooter may also

produce a fault code. If a fault code occurs, you will need to turn the scooter’s power off, then back on

again before proceeding.

Instances may occur when the power seat is raised to reach something or get a better vantage point and not

returned to its lowest position before operating the scooter again. Depending on how high the power seat

is raised, your scooter’s speed will be reduced when operating the scooter.

Elevating the power seat to approximately one-half its maximum height limits your scooter’s speed to half

that set with the speed adjustment dial. If the power seat is elevated to approximately three-quarters its

maximum height, the scooter will not move if the throttle control lever is pressed. The power seat must be

lowered to slightly under three-quarters of its maximum height in order to drive the scooter agian. The

scooter cannot be driven at full speed until the scooter’s seat is lowered to approximately one-half its

maximum height.

It is strongly recommended that the scooter not be operated with the power seat elevated.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

V I I . D I S A S S E M B L Y A N D A S S E M B L Y

DISASSEMBLY

SEAT

You can disassemble the scooter into seven pieces:

the seat, the front section, the rear section, the rear

shroud, the basket, and the batteries. See figure 15.

No tools are required to disassemble or assemble

your scooter, but keep in mind that the disassembled

sections of the scooter take up more floor space than

the assembled unit. Always disassemble or assemble

your scooter on a level, dry surface with sufficient

room for you to work and move around your scooter-

about 5 feet (2 meters) in all directions. Remember

that some scooter components are heavy and you may

need assistance when lifting them.

FRONT SECTION

REAR SECTION

REAR SHROUD

BATTERIES

BASKET

Figure 15. The Scooter Disassembled

WARNING! Do not lift beyond your physical capability. Ask for assistance when

necessary while disassembling or assembling your scooter.

To disassemble the scooter:

1. Place the manual freewheel lever in the drive (down) position.

2. Lift the seat straight up and off the scooter. See figure 16.

3. Gently lift the rear shroud off of the scooter. See figure 17.

4. Disconnect the battery tie-down strap that holds the batteries in place.

5. Unplug both black and white 2-pin battery harnesses. See figure 18.

6. Unplug the front-to-rear harness from its mating plug. See figure 19.

WARNING! Failure to unplug both battery harnesses and the front-to-rear harness prior to

frame separation could result in permanent damage to the scooter.

Figure 16. Seat Removal

Figure 17. Rear Shroud Removal

Figure 18. Disconnecting The Battery Har-

nesses

Figure 19. Disconnecting The Front-To-Rear-

Harness

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

V I I . D I S A S S E M B L Y A N D A S S E M B L Y

NOTE: There is no need to disconnect the motor harness when disassembling the scooter. See figure 20.

7. Lift both batteries off the scooter. See figure 21.

8. Push the locking cam levers forward to the unlocked position and remove the ball detent pins. See

figures 22 and 23.

9. Remove the frame handle ball detent pin. See figure 24.

10. Gently slide the two sections of the scooter apart. See figure 25.

11. Grab the hand grip on the tiller, pull upward on the tiller adjustment lever, and fully lower the tiller

down to the center of the scooter chassis.

MOTOR HARNESS

Figure 21. Battery Removal

Figure 20. Motor Harness

Figure 22. Locking Cam Levers (Unlocked Position)

Figure 23. Frame Lock-up Ball Detent Pins

Figure 24. Frame Handle Ball Detent Pin

Figure 25. Frame Separation

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

V I I . D I S A S S E M B L Y A N D A S S E M B L Y

ASSEMBLY

NOTE: Raise the tiller before starting to reassemble the scooter.

1. Place the manual freewheel lever in the drive (down) position.

2. Position the front and rear sections next to each other.

3. Tilt the rear end to a horizontal position and insert the longer tube of the front end into the rear section

first; make sure that the locking cam levers are in the unlocked (forward) position and the ball detent

pins are removed.

4. Slide the two sections of the unit together until the front half reaches its insertion limit.

5. Secure the front and rear sections with the ball detent pins.

6. Push the locking cam levers back to their locked (upward) position.

7. Replace the frame handle ball detent pins.

8. Plug the front-to-rear harness into its mating plug.

9. Put the batteries in place and plug both black and white 2-pin battery harnesses into their mating plugs.

10. Reconnect the battery tie-down strap.

11. Reinstall the rear shroud.

12. Reinstall the seat.

13. Rotate the seat until it is securely in place.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

V I I I . B A S I C T R O U B L E S H O O T I N G

Any electromechanical device occasionally requires some troubleshooting. However, most of the

problems that may arise can usually be solved with a bit of thought and common sense. Many of these

problems occur because the batteries are not fully charged or because the batteries are worn down and can

no longer hold a charge.

DIAGNOSTIC FLASH CODES

The diagnostic flash codes for your scooter are designed to help you perform basic troubleshooting quickly

and easily. A diagnostic flash code flashes from the status LED in the event one of the conditions listed

below develops.

NOTE: Your scooter will not run unless the flash code condition is resolved and the scooter has been

turned off, then turned back on.

FLASH CODE

CONDITION

SOLUTION

Battery voltage is too low to operate the

scooter.

Charge fully until charger and any meters

indicate completion.

ꢀꢀ

(2)

Battery voltage is too high to operate the

scooter.

Contact your authorized Pride Provider for

assistance.

ꢀꢀꢀ

(3)

Solenoid brake trip. The manual freewheel

lever may be in the freewheel position.

Remove the key, then push the manual free-

wheel lever to the drive position, restart your

scooter.

ꢀꢀꢀꢀꢀ

(5)

Throttle trip. The throttle control lever

may have been depressed while inserting

the key.

Release the throttle control lever completely,

then reinsert the key.

ꢀꢀꢀꢀꢀꢀ

(6)

Throttle trip. The throttle control lever

may have been depressed while inserting

the key.

Contact your authorized Pride Provider for

assistance.

ꢀꢀꢀꢀꢀꢀꢀ

(7)

The scooter’s motor is disconnected.

Contact your authorized Pride Provider for

assistance.

ꢀꢀꢀꢀꢀꢀꢀꢀ

(8)

Possible controller trip. You may be

Shut down your scooter for a minimum of sev-

ꢀꢀꢀꢀꢀꢀꢀꢀꢀ

attempting to install the battery while the eral minutes to allow the controller to cool. Or,

key is inserted or the motor controllermay try reinserting the key into the key switch.

be in overheat protective mode.

(9)

What if all the systems on my scooter seem to be “dead”?

ꢀ Make certain that the key is in the “on” position.

ꢀ Check that the batteries are fully charged. See IV. “Batteries and Charging.”

ꢀ Push in the main circuit breaker reset button. See III. “Your Scooter”

ꢀ Make certain that both battery harnesses are firmly connected to the electronics module and to the

battery terminals. See VII. “Disassembly and Assembly.”

ꢀ Make sure that the front-to-rear harness is firmly connected to the electronics module. See VII.

“Disassembly and Assembly.”

ꢀ Check the fuses. See IX. “Care and Maintenance” for fuse replacement.

ꢀ Be sure the power down timer feature has not been activated. See V. “Operation.”

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

V I I I . B A S I C T R O U B L E S H O O T I N G

What if the motor runs but my scooter does not move?

ꢀ With the key turned to the “on” position, check the status LED. If the LED flashes three times, pauses

briefly, then flashes two times, this is the manual freewheel lever code meaning your scooter is in

freewheel mode.

ꢀ When the manual freewheel lever is pulled up, the brakes are disengaged and all power to the transaxle

is cut.

ꢀ Push down the manual freewheel lever to restore normal operation to your scooter. See III. “Your

Scooter.”

What if the main circuit breaker repeatedly trips?

ꢀ Charge the scooter’s batteries more frequently. See IV. “Batteries and Charging.”

ꢀ If the problem continues, have both of your scooter’s batteries load tested by your authorized Pride

Provider.

ꢀ You may also perform the load test yourself. Battery load testers are available at most automotive parts stores.

ꢀ Follow the directions supplied with the load tester.

ꢀ See IV. “Batteries and Charging” for information about your scooter’s battery type.

What if the battery condition meter dips way down and the motor surges or hesitates when I press

my scooter’s throttle control lever?

ꢀ Fully charge your scooter’s batteries. See IV. “Batteries and Charging.”

ꢀ Have your authorized Pride Provider load test each battery.

ꢀ Or, see the previous troubleshooting question for load testing the batteries yourself.

If you experience any problems with your scooter that you are not able to solve, immediately contact your

authorized Pride Provider for information, maintenance, and service.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I X . C A R E A N D M A I N T E N A N C E

Your scooter requires a minimal amount of care and maintenance. If you do not feel confident in your

ability to perform the maintenance listed below, you may schedule inspection and maintenance at your

authorized Pride Provider. The following areas require periodic inspection and/or care and maintenance.

TIRE PRESSURE

ꢀ If equipped with pneumatic tires, always maintain the psi/bar/kPa air pressure rating indicated on each tire.

WARNING! It is critically important that the psi/bar/kPa air pressure rating be maintained

in pneumatic tires at all times. Do not underinflate or overinflate your tires. Low pressure

may result in loss of control and overinflated tires may burst. Failure to maintain the psi/

bar/kPa air pressure rating indicated on pneumatic tires at all times may result in tire

and/or wheel failure.

ꢀ Regularly inspect your scooter’s tires for signs of wear.

EXTERIOR SURFACES

Bumpers, tires, and trim can benefit from an occasional application of rubber or vinyl conditioner.

WARNING! Do not use a rubber or vinyl conditioner on the scooter’s vinyl seat, floorboard,

or tire tread, as they will become dangerously slippery.

CLEANING AND DISINFECTION

ꢀ Use a damp cloth and mild, non-abrasive cleanser to clean the plastic and metal parts of your scooter.

Avoid using products that may scratch the surface of your scooter.

ꢀ If necessary, clean your product with an approved disinfectant. Make sure the disinfectant is safe for

use on your product before application.

WARNING! Follow all safety instructions for the proper use of the disinfectant and/or

cleaning agent before applying it to your product. Failure to comply may result in skin

irritation or premature deterioration of upholstery and/or scooter finishes.

BATTERY TERMINAL CONNECTIONS

ꢀ Make certain that the terminal connections remain tight and uncorroded.

ꢀ The batteries must sit flat in the battery wells.

ꢀ The battery terminals should face the rear of the scooter.

AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY

These items are all prelubricated, sealed, and require no subsequent lubrication.

MOTOR BRUSHES

The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected periodi-

cally for wear by your authorized Pride Provider.

CONSOLE, CHARGER AND REAR ELECTRONICS

ꢀ Keep these areas away from moisture.

ꢀ Before operating your scooter, allow any of these areas to dry thoroughly if they have been exposed to moisture.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I X . C A R E A N D M A I N T E N A N C E

WHEEL REPLACEMENT

If your scooter is equipped with pneumatic tires and

you have a flat tire, you can have the tube replaced. If

your scooter is equipped with a solid tire insert, either

the solid insert or the entire wheel must be replaced

depending on the model. Contact your authorized

Pride Provider for information regarding replacement

wheels for your scooter.

AXLE KEY

AXLE SLOT

WARNING! Wheels on your scooter

should only be serviced/replaced by an

authorized Pride Provider or qualified

technician.

DRIVE WHEEL WASHER

DRIVE WHEEL NUT

WARNING! Be sure that the key is

removed from the key switch and the

scooter is not in freewheel mode

before performing this procedure.

Figure 26. Drive Wheel Removal

WARNING! When changing

tire,

remove only the center lug nut, then

remove the wheel. If any further disas-

sembly is required, deflate the tire

completely or it may explode.

Follow these easy steps for a quick and safe repair of solid tires:

1. Remove the key from the key switch.

2. Elevate the side of the scooter of which you are removing the tire. Place wooden blocks under the

frame to elevate the scooter.

3. Remove the drive wheel nut and washer from the axle. See figure 26.

4. Pull the wheel off the axle.

5. Slide the new wheel back onto the axle. Make sure that the axle key is in the axle slot. See figure 26.

WARNING! Failure to ensure that the axle key is properly installed into the axle slot when

mounting the wheel can result in electronic brake failure, personal injury, and/or product

damage.

6. Reinstall the drive wheel nut and washer onto the axle and tighten.

WARNING! Make sure both the nut and washer are reinstalled and tightened properly.

7. Remove the blocks from beneath the scooter.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

I X . C A R E A N D M A I N T E N A N C E

WIRING HARNESSES

ꢀ Regularly check all wiring connections.

ꢀ Regularly check all wiring insulation, including the charger power cord, for wear or damage.

ꢀ Have your authorized Pride Provider repair or replace any damaged connector, connection, or insula-

tion that you find before using your scooter again.

PROHIBITED! Even though the scooter has passed the necessary testing requirements

for ingress of liquids, you should keep electrical connections away from sources of

dampness, including direct exposure to water or bodily fluids and incontinence. Check

electrical components frequently for signs of corrosion and replace as necessary.

ABS PLASTIC SHROUDS

ꢀ The front tiller shroud, front shroud, and the rear shroud are formed from durable ABS plastic and are

coated with an advanced formula urethane paint.

ꢀ A light application of car wax will help the shrouds retain their high gloss.

LIGHT BULB REPLACEMENT

The scooter’s light bulbs are easily replacable. Do not use regular automotive-type 12-volt light bulbs;

your scooter is equipped with a 24-volt electrical system. Replacement light bulbs can be purchased from

your authorized Pride Provider.

NOTE: Use only 24-volt light bulbs.

1. Remove the light cover.

2. Gently remove the bulb by pulling it straight out.

3. Insert a new bulb of the same wattage.

4. Replace the light cover.

FUSE REPLACEMENT

In the event a fuse should cease to work:

1. Remove the fuse by pulling it out of its slot.

2. Examine the fuse to be sure it is blown. See figures 27 and 28.

3. Insert a new fuse of the proper rating.

WARNING! The replacement fuse must exactly match the rating of the fuse being

replaced. Failure to use properly rated fuses may cause damage to the electrical system.

Figure 28. Blown Fuse (Replace)

Figure 27. Working Fuse

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

I X . C A R E A N D M A I N T E N A N C E

NYLON LOCK NUT REPLACEMENT

Any nylon insert lock nut removed during the periodic maintenance, assembly, or disassembly of the

scooter must be replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause

damage to the nylon insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available

at local hardware stores or through your authorized Pride Provider.

STORING YOUR SCOOTER

If you plan on not using your scooter for an extended period of time, it is best to:

ꢀ Fully charge its batteries prior to storage.

ꢀ Disconnect the batteries from the scooter.

ꢀ Store your scooter in a warm, dry environment.

ꢀ Avoid storing your scooter where it will be exposed to temperature extremes.

WARNING! Always protect batteries from freezing temperatures and never charge a

frozen battery. Charging a frozen battery may result in damage to the battery.

Batteries that are regularly and deeply discharged, infrequently charged, stored in extreme temperatures,

or stored without a full charge may be permanently damaged, causing unreliable performance and limited

service life. It is recommended that you charge the scooter batteries periodically throughout periods of

prolonged storage to ensure proper performance.

You may wish to place several boards under the frame of your scooter to raise it off of the ground during

periods of prolonged storage. This takes the weight off the tires and reduces the possibility of flat spots

developing on the areas of the tires contacting the ground.

DISPOSAL OF YOUR SCOOTER

Your scooter must be disposed of according to applicable local and national statutory regulations. Contact

your local waste disposal agency or authorized Pride Provider for information on proper disposal of pack-

aging, metal frame components, plastic components, electronics, batteries, neoprene, silicone, and poly-

urethane materials.

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

A P P E N D I X I - S P E C I F I C A T I O N S

MAXIMA SPECIFICATIONS

Model Number

3-wheel: SC900

4-wheel: SC940

3-wheel: 46 in. (116.84 cm)

4-wheel: 46.875 in. (119.06 cm)

Overall Length

25.5 in. (64.8 cm) at wheels

Overall Width

3-wheel: 171 lbs. (77.5 kg)

4-wheel: 176 lbs. (80 kg)

Total Weight Without Batteries

3-wheel: Rear section: 66.5 lbs. (30.16 kg)

4-wheel: Front section: 75.5 lbs. (34.25 kg)

Heaviest Piece When Disassembled

3-wheel: 50.38 in. (128 cm)

4-wheel: 54 in. (137.2 cm)

Turning Radius

Variable up to 5.25 mph (8.45 km/h)

Speed (maximum)

1, 2

With 55 Ah batteries: 3-wheel - Up to 18 miles (29 km)

4-wheel - Up to 16 miles (25.75 km)

Range Per Charge

With U-1 batteries: Up to 9.6 miles (15.45 km)

3-wheel: 4.25 in. (10.8 cm)

4-wheel: 3.25 in. (8.26 cm)

Ground Clearance

Maximum Allowable Incline

Weight Capacity

6° (10.5%)

500 lbs. (227 kg)

Standard Seating

Type: DX contour medium black

Dimensions: 22 in. (56 cm) width x 18 in. (46 cm) depth x 18.5 in. (47 cm) height

Black Vinyl

41 lbs. (19 kg)

Standard Seat Weight

Drive System

Dual Braking System

Tires

Rear-wheel drive, sealed transaxle with 24-volt DC motor

Regenerative and electromechanical

Type: Solid (PU Foam)

Front: 3 in. x 10 in. (7.5 cm x 25 cm)

Rear: 4 in. x 10 in. (10 cm x 25 cm)

Battery Requirements

Type: Two 12-volt deep-cycle

Size: (U-1) 31-36 Ah; (NF-22) 55 Ah

3, 4, 5

U-1: 24.5 lbs. (11 kg) each

NF-22: 38 lbs. (17 kg) each

Battery Weight

Battery Charger

Off-board

Varies with user weight, terrain type, battery amp-hour (Ah), battery charge, battery condition, and tire

condition. This specification can be subject to a variance of +10%, -5%.

Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from

theoretical calculation based on battery specifications and drive system performance. Test conducted at

maximum weight capacity.

Due to manufacturing tolerances and continual product improvement, this specification can be subject to a

variance of (+ or -) 3%.

AGM or Gel-Cell type required. See IV. “Batteries and Charging.”

Battery weight may vary based on battery manufacturer.

Test conducted on SC900 at maximum weight capacity.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176

series EN12184 standards. All specifications subject to change without notice.

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

A P P E N D I X I - S P E C I F I C A T I O N S

18.5 in.

(47 cm)

3-wheel: 22.3 - 22.6 in.

(56.6 - 57.4 cm)

4-wheel: 24.3 - 24.6 in.

(61.7 - 62.5 cm)

3-wheel 4.25 in. (10.8 cm)

4-wheel 3.25 in. (8.26 cm)

18 in. (46 cm)

22 in.

(56 cm)

3-wheel: 46 in. (116.84 cm)

4-wheel: 46.875 in. (119.06 cm)

24 - 28 in.

(61 - 71 cm)

Turning Radius

3-wheel: 50.38 in. (128 cm)

4-wheel: 54 in. (137.2 cm)

25.5 in.

(64.8 cm)

Figure 29. Scooter Dimensions

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

N O T E S

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

N O T E S

Maxima

_{Download from Www}w_.Sow_mw_an._up_alr_si_.cd_oe_mm_{. Al}o_{l M}b_ai_nli_ut_ay_ls.c_So_eam_{rch And Download.}

N O T E S

Maxima

_{Download from W}w_www_.Sw_om.p_anr_uid_alse_.cm_omo_.b_Ali_ll_Mit_ay_n._uc_ao_lsm_{Search And Download.}

*I NFMANU2058*

Download from Www.Somanuals.com. All Manuals Search And Download.

Peavey Stereo Amplifier PV Series User Manual
Philips Computer Monitor 107T70 User Manual
Philips Digital Camera SPC600NC User Manual
Philips DVD Player DVD 765K User Manual
Pioneer DVD Recorder DVR X152 User Manual
Porter Cable Router A22440 User Manual
Poulan Snow Blower 428550 User Manual
Powermate Blower P WB 163150 User Manual
ProForm Home Gym PFEL13033 User Manual
Psiber Data Systems Switch NETWORK IP TESTER User Manual