™
Synergy TRU-Balance
Power Recline
ACN# 088 609 661
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SAFETY ......................................................................................... 4
THE SYNERGY TRU-BALANCE POWER RECLINE ................... 6
PRECAUTIONARY GUIDELINES ................................................. 6
OPERATING THE SYNERGY TRU-BALANCE POWER
RECLINE ....................................................................................... 9
POWER SEAT ELEVATOR OPTION........................................... 16
HIGH-PIVOT POWER ELEVATING LEG RESTS OPTION ........ 17
POWER ARTICULATING LEG RESTS OPTION........................ 18
SWING-AWAY POWER ARTICULATING LEG RESTS OPTION 19
CONTROLLER POSITION .......................................................... 20
REMOVING THE ARMRESTS..................................................... 21
CARE AND MAINTENANCE...................................................... 21
WARRANTY ................................................................................ 22
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Basic Operation Instructions
INTRODUCTION
WELCOME to Quantum Rehab, a division of Pride Mobility Products Corporation
(Pride). The product you have purchased combines state-of-the-art components
with safety, comfort, and styling in mind.We are confident that the design features
will provide you with the conveniences you expect during your daily activities.
Understanding how tosafely operate and care for this product should bring you
years of trouble free operations and service.
Readand followall instructions, warnings, and notes in this manual and all other
accompanying literature before attempting to operate this product for the first
time. In addition, yoursafetydepends upon you, as well as your provider, caretaker,
or healthcare professional in using good judgement.
Thismanualistobeusedinadditiontothepowerbaseowner’smanualthatcamewith
yourpowerchair.Ifthereisanyinformationinthismanualwhichyoudonotunderstand,
or if you require additional assistance for setup or operation, please contact your
Quantum Rehab Specialist. Failure to follow the instructions, warnings, and
notes in this manual and those located on your Pride product can result in
personalinjuryand/orproductdamageandwillvoidPride’sproductwarranty.
PURCHASER’S AGREEMENT
By accepting delivery of this product, you promise that you will not change, alter,
or modify this product or remove or render inoperable or unsafe any guards,
shields, or other safety features of this product; fail, refuse, or neglect to install any
retrofit kits from time to time provided by Pride to enhance or preserve the safe
use of this product.
INFORMATION EXCHANGE
We want to hear your questions, comments, and suggestions about this manual.
We would also like to hear about the safety and reliability of your new Pride
product, and about the service you received from your Quantum Rehab Specialist.
Please notify us of any change of address, so we can keep you apprised of important
information about safety, new products, and new options that can increase your
ability to use and enjoy your Pride product. Please feel free to contact us at the
following address:
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
5
Pride Mobility Products Corporation
Attn: Customer Care Department
182 SusquehannaAvenue
Exeter, PA18643-2694
NOTE: If you ever lose or misplace your product registration card or your
copy of this manual, contact us and we will be glad to send you a new one
immediately.
PRIDE OWNERS CLUB
As an owner of a Pride product, you are encouraged to enroll in the Pride Owners
Club. Complete and return your enclosed product registration card or visit Pride's
From our home page, select “Owners Club” to enter a page dedicated to current
and potential Pride product owners. You will gain access to interviews, stories,
recreation ideas, daily living tips, product and funding information, and interactive
message boards. These message boards invite you to communicate with other
Pride customers as well as Pride representatives who are available to assist you
with any questions or concerns.
My Quantum Rehab Specialist Is:
Name: _____________________________________________________
Address:____________________________________________________
Phone Number: ______________________________________________
Purchase Date: _______________________________________________
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Basic Operation Instructions
THETRU-BALANCE POWER RECLINE
The TRU-Balance Power Recline is a unique seating system designed specifically
for the Pride Power Chair. It is fully adjustable to meet the individual needs of the
user, and it is mounted to a Pride power base to provide maximum maneuverability.
Reusable hook and loop fasteners are included in your owner’s package for use in
attaching the seat cushion to the seat base. These fasteners are not intended for
use on cushions with anti-skid material, as they may damage the seat cushion.
Figure 1 provides information on the TRU-Balance Power Recline components.
Use this diagram to familiarize yourself with the function and location of each
component before using the TRU-Balance Power Recline.
PRECAUTIONARY GUIDELINES
Before operating the TRU-Balance Power Recline, please read the following.
These guidelines are provided for your benefit and will aid you in the safe operation
of the seating system.
! Turn off the power before you are seated in the seating system.
! Always have assistance when you are being seated in theseating system.
! Follow all of the procedures and heed the warnings as explained in your power
chair owner’s manual.
WARNING! Your Quantum Rehab Specialist configured your
TRU-Balance Seating System to suit your specific
requirements. Do not change the original configuration
without first contacting your Quantum Rehab Specialist.
WARNING! Should the fittings on your TRU-Balance Seating
System become loose, report the problem immediately to
your Quantum Rehab Specialist.
WARNING! Your TRU-Balance Seating System is not approved
for use as a seat in any vehicle. Use the seats and occupant
restraints provided by the manufacturer of the vehicle.
WARNING! Do not exceed the weight capacity listed in your
power chair owner’s manual or 300 lbs. (136 kg), whichever
is less.
WARNING! Traveling to the full recline position could create
a pinch point. Keep all body parts away from the lower back
cane brackets when reclining.
Failure to heed the above warnings can result in personal injury and/or
equipment damage.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
7
Electromagnetic and Radio Frequency Interference (EMI/RFI)
WARNING! Laboratory tests have shown that electromagnetic
and radio frequency waves can have an adverse affect on
the performance of electrically-powered mobility vehicles.
Electromagnetic and Radio Frequency Interference can come from sources such as
cellular phones, mobile two-way radios (such as walkie-talkies), radio stations, TV
stations, amateurradio(HAM)transmitters, wirelesscomputerlinks, microwavesig-
nals, pagingtransmitters, andmedium-rangemobiletransceiversusedbyemergency
vehicles. In some cases, these waves can cause unintended movement or damage to
thecontrolsystem. Everyelectrically-poweredmobilityvehiclehasanimmunity(or
resistance) to EMI. The higher the immunity level, the greater the protection against
EMI. This product has been tested and has passed at an immunity level of 20 V/m.
WARNING! Be aware that cell phones, two-way radios,
laptops, and other types of radio transmitters may cause
unintended movement of your electrically-powered mobility
vehicle due to EMI. Exercise caution when using any of these
items while operating your mobility vehicle and avoid coming
into close proximity of radio and TV stations.
WARNING! The addition of accessories or components to
the electrically-powered mobility vehicle can increase the
susceptibility of the vehicle to EMI. Do not modify your power
chair in any way not authorized by Pride.
WARNING! The electrically-powered mobility vehicle itself
can disturb the performance of other electrical devices
located nearby, such as alarm systems.
NOTE: For further information on EMI/RFI, go to the Resource Center on
your power chair off as soon as it is safe to do so. Call Pride at 800-424-8205
to report the incident.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Basic Operation Instructions
4-WAY TOGGLE CONTROLS (OPTIONAL)
Allows the user to control the recline, tilt, seat elevator, and articulating leg rest
actuators (if so equipped).
ATTENDANT CONTROL
MODULE
Allows an attendant to
control the actuators. Any
action made through the
Attendant Control Module
overrides the toggle actions
made by the user.
4-way Toggle
4-way Button Toggle
Quad Push-Button Control
LEG RESTS (OPTIONAL)
HIGH PIVOT ELEVATING
LEG RESTS (ELR)
Mimics the motion of the
knee during leg elevation.
REMOVABLE ARMRESTS
Allows the armrests to be
flipped back or removed
whenever necessary.
ARTICULATING LEG
RESTS (ALR)
Maintains correct
knee-to-heel measurements
when user's legs are raised
or lowered.
SWING-AWAY
ARTICULATING
LEG RESTS (ALR)
Maintains correct
knee-to-heel measurements
when user's legs are raised
or lowered
Figure 1. Components of the Synergy TRU-Balance Power Recline
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
9
OPERATINGTHE SYNERGYTRU-BALANCE POWER RECLINE
The Synergy TRU-Balance Power Recline can be operated through the PG Remote
Plus joystick, a specialty controller, theAttendant Control Module, or a toggle
(see figure 4, 5, and 6). There are inhibits on your Synergy Seating System which
will not allow you to drive your power chair or operate certain options when
reclined or elevated. See figure 2.
WARNING! Check the immediate area before operating the
recline features. Keep clear prior to and during movement.
Failure to heed can result in personal injury and/or equipment
damage.
NOTE: This manual will discuss toggle, joystick, and Attendant Control
Module operations only. If your Synergy Seating System is equipped with
a different operating device, please refer to the operation manual sup-
plied with that device and/or your power chair owner’s manual.
Recline
Tilt
Elevate
Full Drive
Lock Out
Lock Out Lock Out 1/4 Speed Lock Out
Elevated
x
x
Active
Active
Tilted more than 5°
Tilted more than 20°
Reclined more than 20°
Tilted/reclined
x
x
Active
Active
more than 170°
x
x
x
Active
Figure 2. Inhibit Matrix
The Synergy TRU-Balance Power Recline is at a normal position of 95°and can
recline to 168°maximum, in infinite increments. See figure 3.
95
168
Figure 3. Angles of Recline
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Basic Operation Instructions
Toggle Operation
Your SynergyTRU-Balance Power Recline may be equipped with one of three
available 4-way toggles, as well as anAttendant Control Module. The actuators
can be adjusted either by the user through the toggle, or by an attendant through
theAttendant Control Module. Any action made through theAttendant Control
Module will override toggle actions.
NOTE: Your TRU-Balance seating system may be equipped with any
number of these functions.
4-way Toggle
! Recline Function
1. To recline, push the toggle switch forward.
2. To return to an upright position or a 95° recline
position, push the toggle switch forward, release, then
push forward again.
! Tilt Function (Optional)
1. To tilt backward, pull the toggle switch backward.
2. To return to a sitting position or to a 0° tilt position,
pull the toggle switch backward, release, then pull
backward again.
Figure 4. 4-way
Toggle Operation
! Seat Elevator Function (Optional)
1. To elevate the seat, push the toggle switch to the left.
2. To lower the seat, push the toggle switch to the left,
release, then push to the left again.
! Combined Leg Rest Function (Optional)
1. To elevate both leg rests, push the toggle switch to the right.
2. To lower both leg rests, push the toggle switch to the right, release, then
push to the right again.
! Independent Leg Rest Function (Optional)
1. To elevate the left leg rest, push the toggle switch to the left.
2. To lower the left leg rest, push the toggle switch to the left, release, then
push to the left again.
3. To elevate the right leg rest, push the toggle switch to the right.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
11
4. To lower the right leg rest, push the toggle switch to the right, release, then
push to the right again.
NOTE: The power elevator option is not available when the independent
leg rest option is selected.
4-way Button Toggle
! Recline Function
1. To recline, push the toggle button forward.
2. To return to an upright position or a 95°recline position,
push the toggle button forward, release, then push
forward again.
! Tilt Function (Optional)
1. To tilt backward, pull the toggle button backward.
2. To return to a sitting position or to a 0°tilt position, pull
the toggle button backward, release, then pull backward
Figure 5. 4-way
ButtonToggle
again.
Operation
! Seat Elevator Function (Optional)
1. To elevate the seat, push the toggle button to the left.
2. To lower the seat, push the toggle button to the left, release, then push to the
leftagain.
! Combined Leg Rest Function (Optional)
1. To elevate both leg rests, push the toggle button to the right.
2. To lower both leg rests, push the toggle button to the right, release, then push
to the right again.
! Independent Leg Rest Function (Optional)
1. To elevate the left leg rest, push the toggle button to the left.
2. To lower the left leg rest, push the toggle button to the left, release, then push
to the left again.
3. To elevate the right leg rest, push the toggle button to the right.
4. To lower the right leg rest, push the toggle button to the right, release, then
push to the right again.
NOTE: The power elevator option is not available when the independent
leg rest option is selected.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Basic Operation Instructions
Quad Push-Button Control Toggle
! Recline Function
1. To recline, push the second button.
1
2. To return to an upright position or a 95° recline
2
3
4
position, push the second button again.
! Tilt Function (Optional)
1. To tilt backward, push the first button.
2. To return to a sitting position or to a 0° tilt position,
push the button again.
! Seat Elevator Function (Optional)
1. To elevate the seat, push the third button.
2. To lower the seat, push the third button again.
Figure 6. Quad
Push-Button
ControlToggle
Operation
! Combined Leg Rest Function (Optional)
1. To elevate both leg rests, push the fourth button.
2. To lower both leg rests, push the fourth button again.
! Independent Leg Rest Function (Optional)
1. To elevate the left leg rest, push the third button.
2. To lower the left leg rest, push the third button again.
3. To elevate the right leg rest, push the fourth button.
4. To lower the right leg rest, push the fourth button again.
NOTE: The power elevator option is not available when the independent
leg rest option is selected.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
13
Attendant Control Module
Your SynergyTRU-Balance Power Recline is equipped with anAttendant Control
Module (see figure 7). The actuators can be adjusted either by the user through
the controller or the toggle, or by an attendant through theAttendant Control
Module. Any action made through theAttendant Control Module will override
toggle actions made by the user. To adjust any of the actuators, press Select to
cycle until the actuator to be adjusted is illuminated on the actuator indicator (see
figure 8), then press the up arrow to increase the lift or tilt or the down arrow to
decrease the lift or tilt.
Actuator Indicator
Power Key
Figure 7. Attendant Control Module Functions
NOTE: Your TRU-Balance Seating System may be equipped with some
or all of these functions.
! Recline Function
1. Press the power key to power on the module.
2. Press Select until the actuator on the back is illuminated on the actuator
indicator on the module. Use the up and down arrows to increase or decrease
the angle of recline.
3. To return to an upright position or a 95° recline position, press Select
until the actuator on the back is illuminated on the actuator indicator on
the module, and then press the down arrow until the seatback is in the
upright position.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Basic Operation Instructions
! Tilt Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the actuators in both the back and seat are illuminated
on the actuator indicator on the module. Use the up and down arrows to
increase or decrease the degree of tilt.
3. To return to a sitting position or to a 0° tilt position, press Select until the
actuators in both the back and seat are illuminated on the actuator indicator
on the module, and then press the down arrow until the seat is in a sitting
position.
! Seat Elevator Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the actuator on the seat is illuminated on the actuator
indicator on the module. Use the up and down arrows to increase or decrease
the height of the seat.
3. To lower the seat to its original position, press Select until the actuator
on the seat is illuminated on the actuator indicator on the module, and
then press the down arrow until the seat is lowered to its original position.
! Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press Select until the desired leg rest actuator is illuminated on the actuator
indicator on the module. Use the up and down arrows to increase or decrease
the degree of elevation.
3. To return the leg rest to a lowered position, press Select until the desired
leg rest actuator is illuminated on the actuator indicator on the module,
and then press the down arrow until the leg rest is in a lowered position.
! Independent/Combined Leg Rest Function (Optional)
1. Press the power key to power on the module.
2. Press Select to cycle through the left, right, and combined leg rests until
the desired leg rest actuator is illuminated on the actuator indicator on
the module. Use the up and down arrows to increase or decrease the degree
of elevation.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
15
3. To return the leg rest to a lowered position, press Select to cycle through
the left, right, and combined leg rests until the desired leg rest actuator is
illuminated on the actuator indicator on the module, and then press the
down arrow until the leg rest is in a lowered position.
Joystick Operation
1. Press the On/Off key to power on the chair and the controller.
2. Press the Mode key twice to select actuator adjustment mode.
3. Push the joystick to the right to cycle through the available motor functions until
the seat back light is illuminated on the actuator indicator. See figure 8.
4. Push the joystick forward to raise the seatback or backward to recline the
seatback.
5. Press the Mode key again to return to the drive mode.
Recline Mode
Tilt Mode
Elevating Seat Mode
ALR/ELR Mode (both)
ALR/ELR Mode (right)
ALR/ELR Mode (left)
Figure 8. Actuator Modes
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Basic Operation Instructions
POWER SEAT ELEVATOR OPTION
The power seat elevator provides lift of up to 7 in. (18 cm) from the power base
using a single post plate and actuator. See figure 9. The maximum weight capacity
of the power seat elevator is 300 lbs. (136 kg) and is available on some models.
Contact your Quantum Rehab Specialist for specific information. The power seat
elevator operates through the power chair controller, toggle switch, orAttendant
Control Module.
NOTE: When the seat is elevated, a 1/4-speed drive inhibit is engaged and
you are no longer able to tilt the seat. See figure 2.
NOTE: Operation instructions using the joystick 4-way toggles are dis-
cussed below. If you are using a different toggle, the Attendant Control
Module, or a different operating device, please refer to the appropriate
section of this manual or the operation manual supplied with that device
and/or your power chair owner’s manual.
To operate the power seat elevator:
1. Push the toggle switch to the left to elevate the seat.
2. Push the toggle switch to the left, release, then push to the left again to
lower the seat.
Actuator
Figure 9. The Power Seat Elevator Option on a Synergy TRU-Balance
Power Recline
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
17
HIGH-PIVOT POWER ELEVATING LEG RESTS OPTION
The high-pivot power elevating leg rests utilize a high pivot point to more closely
mimicthemotionofthekneeduringlegrestelevation Theycanbeadjustedeitheras
apairorindividually. Seefigure10.Thehigh-pivotpowerelevatinglegrestsprovide
70°of movement, have standard swing-away calf pads that are height adjustable,
accept all foot plates, and have a maximum weight capacity of 300 lbs. (136 kg).
They are available with all power bases that support upgraded electronics and that
are available with Synergy Seating Systems. The high-pivot power elevating leg
rests operate through the power chair controller or toggle switch.
NOTE: Operation instructions using the joystick 4-way toggles are dis-
cussed below. If you are using a different toggle, the Attendant Control
Module, or a different operating device, please refer to the appropriate
section of this manual or the operation manual supplied with that device
and/or your power chair owner’s manual.
NOTE: For information on operating individual power elevating leg rests,
please refer to the appropriate section of this manual that refers to the
controller you are using, or contact your Quantum Rehab Specialist.
To operate the combined leg rests:
1. Push the toggle switch to the right to elevate both leg rests.
2. Push the toggle switch to the right, release, then push to the right again to
lower both leg rests.
Figure 10. The High-Pivot Power Elevating Leg Rests Option
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Basic Operation Instructions
POWER ARTICULATING LEG RESTS OPTION
The power articulating leg rests maintain the correct knee-to-heel measurements
when the user’s legs are being elevated and can be adjusted either as a pair or
individually. See figure 11. The power articulating leg rests provide 70°or 80°of
movement, havestandardswing-awaycalfpadsthataredepthandheightadjustable,
accept all foot plates, and have a maximum weight capacity of 300 lbs. (136 kg).
They are available with all power bases that support upgraded electronics and
that are available with Synergy Seating Systems. The power articulating leg rests
operate through the power chair controller, toggle switch, orAttendant Control
Module.
NOTE: Operation instructions using the 4-way toggles are discussed be-
low. If you are using a different toggle, the Attendant Control Module, or
a different operating device, please refer to the appropriate section of this
manual or the operation manual supplied with that device and/or your
power chair owner’s manual.
NOTE: For information on operating individual power articulating leg
rests, please refer to the appropriate section of this manual that refers to
the controller you are using, or contact your Quantum Rehab Specialist.
To operate the combined leg rests:
1. Push the toggle switch to the right to elevate both leg rests.
2. Push the toggle switch to the right, release, then push to the right again to
lower both leg rests.
Figure 11. The Power Articulating Leg Rests Option
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
19
SWING-AWAY POWER ARTICULATING LEG RESTS OPTION
The swing-away power articulating leg rests are operated the same way and have
the same features as the power articulating leg rests but have an added swing-
away feature which enables you to rotate the leg rests to the side before you
transfer onto or off of your power chair.
To rotate the swing-away power articulating leg rests:
1. Push in the release lever. See figure 12.
2. Rotate the leg rest.
RELEASE
LEVER
Figure 12. The Swing-away Power Articulating Leg Rests Option
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Basic Operation Instructions
CONTROLLER POSITION
You can position the controller for either left-hand or right-hand use.You can also
adjust the extension of the controller from the armrest.
WARNING! Do not place the controller cable so that it can
be pinched in the seat frame or the power base frame.
To change the controller position:
1. Turn off the power to the controller.
2. Unplug the controller connector from the power base. Refer to the power
base owner’s manual.
3. Remove any wire ties securing the controller cable to the armrest.
4. Loosen the mounting screws in the controller mounting block. See figure 13.
5. Move the controller mounting block and controller to the other armrest and
tighten the mounting screws.
6. Route the controller cable to the back of the power base and reconnect the
controller. See figure 14.
To change the controller extension:
1. Turn off the power to the controller.
2. Loosen the setscrews in the controller mounting block. See figure 13.
3. Slide the controller into or out of the armrest to the desired position.
4. Tighten the setscrews to secure the controller.
Mounting Block
Mounting Screws
Set Screws
Figure 13. Controller Position -
Mounting Block
Figure 14. Cable Routing
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
21
REMOVING THE ARMRESTS
The armrests on your Synergy TRU-Balance Power Recline are unique to
this model and can only be adjusted by your Quantum Rehab Specialist.
However, you can remove the armrests if necessary.
To remove the armrests:
1. Pull the armrest lock lever on the seat base toward you. See figure 15.
2. Press the button on the side tube. See figure 15.
3. Pull up and out on the armrest to remove it from the seat. See figure 16.
Figure 16. Armrest Removal
Figure 15. Armrest Unlock
CARE AND MAINTENANCE
! Make sure all hardware is secured properly, but do not overtighten any
hardware.
! To clean the seating system, wipe it with a cloth dampened with mild soap and
water. Thoroughly dry the unit before using.
MANDATORY! Avoid exposure to rain, snow, ice, salt, or
standing water whenever possible. Maintain and store in a
clean and dry condition.
Failure to heed can cause personal injury and/or equipment damage.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Basic Operation Instructions
WARRANTY
Three-Year Limited Warranty
For three (3) years from the date of purchase, Pride will repair or replace at our
option to the original purchaser, free of charge, any of the following parts found
uponexaminationbyanauthorizedrepresentativeofPridetobedefectiveinmaterial
and/or workmanship:
! Structural frame components
Two-Year Limited Warranty
For two (2) years from the date of purchase, Pride will repair or replace at
our option to the original purchaser, free of charge, any of the following
parts found upon examination by an authorized representative of Pride to be
defective in material and/or workmanship:
! Electronics
Eighteen-Month Warranty
For eighteen (18) months from the date of purchase, Pride will repair or
replace at our option to the original purchaser, free of charge, any of the
following parts found upon examination by an authorized representative of
Pride to be defective in material and/or workmanship:
! Actuator
Warranty service can be performed by an authorized Pride Provider or by
Pride. Do not return faulty parts to Pride without prior consent. All
transportation costs and shipping damage incurred while submitting parts
for repair or replacement are the responsibility of the original purchaser.
Warranty Exclusions
! Upholstery and seating
! Repairs and/or modifications made to any part without specific consent
from Pride
! Circumstances beyond the control of Pride
! Labor, service calls, shipping, and other charges incurred for repair of
the product, unless specifically authorized by Pride.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation Instructions
23
! Damage caused by:
! Battery fluid spillage or leakage
! Abuse, misuse, accident, or negligence
! Improper operation, maintenance, or storage
! Commercial use or use other than normal
This is the exclusive remedy. Liabilities for consequential damages under
any and all warranties are excluded.
There is no other express warranty.
Implied warranties, including those of merchantability and fitness for a
particular purpose, are limited to one (1) year from the date of purchase and
to the extent permitted by law. Any and all implied warranties are excluded.
Some states do not allow limitations on how long an implied warranty lasts
or do not allow the exclusion of limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific rights, and you may also have other rights
which vary from state to state.
Please fill out and return the product registration card to Pride Mobility
Products Corporation. This will aid Pride in providing the best possible
technical and customer service.
NOTE: If you ever lose or misplace your product registration card or this
manual, contact us and we will be glad to send you a new one immedi-
ately.
Synergy TRU-Balance Power Recline
Download from Www.Somanuals.com. All Manuals Search And Download.
Pride Mobility Products Corporation
182 Susquehanna Avenue
Exeter, PA 18643-2694
USA
Pride Mobility Products Company
380 Vansickle Road Unit 350
St. Catharines, Ontario L2R 6P7
Canada
Pride Mobility Products Ltd.
Unit 106, Heyford Park Camp Road
Upper Heyford, Oxfordshire OX25 5HA
Pride Mobility Products Australia Pty. Ltd.
21 Healey Road
Dandenong, 3175
Victoria, Australia
Pride Mobility Products Italia S.r.l.
Via del Progresso - ang. Via del Lavoro
Loc. Prato della Corte
00065-Fiano Romano (RM)
Pride Mobility Products Europe B.V.
Tijnmuiden 28
1046 AL Amsterdam
The Netherlands
*I NFMANU2396*
Download from Www.Somanuals.com. All Manuals Search And Download.
|