Professional
EverSharp Electric
Knife
Sharpener
three-stage sharpening system for professional
results at home.
no guess sharpening. Blade guides automatically
hold knife at the perfect sharpening angle.
Interchangeable guides for heavy, medium, and
fine knife blades.
InstructIons
2007 by National Presto Industries, Inc.
This is a
Listed appliance. The following important safeguards are recommended by most portable appliance
manufacturers.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always
be followed, including the following:
1. Read all instructions before using the knife sharpener.
2. To protect against the risk of electrical shock, do not put knife sharpener in water or other liquids.
3. Close supervision is necessary when any appliance is used by or near children.
4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.
5. Do not operate knife sharpener without blade guide in place.
6. Avoid contacting moving parts.
7. Do not operate any appliance with a damaged cord or plug, or in the event the appliance malfunctions, or is dropped or
damaged in any manner. Return the appliance to the Presto Factory Service Department for examination, repair, or electrical
or mechanical adjustment.
8. The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.
9. Do not use outdoors.
10. Do not let cord hang over edge of table or counter or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner or in a heated oven.
12. Do not use the knife sharpener for other than intended use.
SAVE THESE INSTRUCTIONS
This product is for household use only.
Important Cord Information
Connect the power supply cord to a polarized outlet only. As a safety feature, this appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electric shock, this plug will only fit in a polarized outlet one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety
feature.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
If your knife just needs a little touch-up sharpening, begin with STAGE 3 – HONING. This is the stage located on the right.
This will be the stage most frequently used. It completes the knife sharpening process by honing and polishing the knife to an
exact razor sharp edge. Follow the sharpening procedure as described below, using only the slots in Stage 3. Then complete
the honing process with one quick pass (approximately one second) through both slots of Stage 3.
5. Begin sharpening. The sharpening procedure is the same for each stage.
Sharpening Procedure
Begin by placing the knife in the left slot of the stage in use, so the side of the blade rests against the outside face (Fig. F) and
the cutting edge makes contact with the bottom of the sharpening slot (Fig. E). The outside face of each sharpening slot acts as
a guide to insure that the knife is positioned at the perfect sharpening angle. For best results, do not stand directly in front of
Stage 2 during sharpening; instead, if you are right handed, stand slightly off to the
Outside face
of left slot
Fig. F
left of Stage 2 and if you are left handed, stand slightly off to the right of Stage 2. This
will make it easier to draw the knife through the guide slots.
Inside face
of left slot
Slowly draw the knife towards you through both the left and right slots three times,
alternating passes between the two slots. When sharpening the tip of the blade, lift up
on the knife handle slightly as the curved portion of the blade is drawn through the
slots. Note: The greater the curve on the blade the more you will need to lift up on the
handle; the less the curve, the less you will need to lift up on the handle. Certain blades
may not have a curve and therefore it will not be necessary to lift up on the handle as
you draw the tip through the slots.
When drawing the knife through the slots, allow approximately one second for each two inches of blade. For example, if
sharpening a knife with a 6-inch blade, you should take approximately three seconds for each pass.
6. Before using the knife to slice food, always wipe the knife blade with a damp cloth to remove metal filings that may have
deposited during sharpening.
7. If knife does not slice food with ease, repeat Stages 2 and 3.
8. When sharpening is completed, turn the unit off by pressing the symbol “O” on the on/off switch.
Note: With normal use, you may notice small cuts appearing at the front base of the knife slots. These are normal and should not
affect the knife sharpening procedure.
CAUTION:
Do not run fingers along edge of knife to check sharpness. To avoid injury, handle knives with extreme care.
Never insert the tip of the knife into the blade guide first and push through. This could damage the knife sharpener and
your knife.
Before using the knife to slice food, always wipe the knife blade with a damp cloth to remove any metal filings that may
remain from the sharpening process.
Questions And Answers
How often should I sharpen my knives?
Hone (Stage 3) the knife prior to each use if you want to maintain a razor sharp edge. After extensive use, if you have honed the
knife and it no longer slices food with ease, run the knife through Stages 2 and 3.
How do I get an even edge on my knife?
To get an even edge when sharpening, be sure to place the knife in the slot so the side of the blade rests against the outside face
(Fig. F) and the cutting edge makes contact with the bottom of the sharpening slot (Fig. E). The outside face of each sharpening
slot acts as a guide to insure that the knife is positioned at the perfect sharpening angle. For best results, do not stand directly
in front of Stage 2 during sharpening; instead, if you are right handed, stand slightly off to the left of Stage 2 and if you are left
handed, stand slightly off to the right of Stage 2. This will make it easier to draw the knife through the guide slots.
Allow adequate time for sharpening. When drawing the knife through the slots, allow approximately one second for each two
inches of blade. For example, if sharpening a knife with a 6-inch blade, you should take approximately three seconds for each pass.
Pulling the knife through too quickly may result in an uneven edge.
When sharpening the tip of the blade, lift up on the knife handle slightly as the curved portion of the blade is drawn through the
blade guides. Note: The greater the curve on the blade the more you will need to lift up on the handle; the less the curve, the less
3
Download from Www.Somanuals.com. All Manuals Search And Download.
you will need to lift up on the handle. Certain blades may not have a curve and therefore it will not be necessary to lift up on the
handle as you draw the tip through the slots.
How can I tell if my knife is sharp?
Use it to slice food. If the knife does not slice the food with ease, it needs additional sharpening. Repeat Stages 2 and 3. If the knife
is extremely dull, repeat stages 1, 2, and 3.
My knife is not sharp and I’ve gone through the whole knife sharpening procedure twice. What am I doing wrong?
Although unusual, there are times when you will have to repeat Stages 1, 2, and 3 more than once. This may occur during the first
sharpening of a knife that has been improperly sharpened by another process previously. It may also occur when sharpening knives
of tempered steel which have extremely hard blades, such as some hunting knives.
To sharpen these types of knives with the Presto knife sharpener, simply continue to repeat Stages 1, 2, and 3 until the knife cuts
food easily. Depending on the condition of the blade, you may have to repeat the process several times. (In extreme cases, this
could be 10 times or more.) This extended process will only be necessary the first time you use the knife sharpener for this type
of knife. Thereafter, you will be able to sharpen your knife following the normal sharpening procedure.
Can I sharpen serrated knives with my Presto electric knife sharpener?
Yes, with the exception of electric serrated knives or knives serrated on both sides. To sharpen non-electric serrated knives, use
only the slots in Stages 2 and 3 and only sharpen the smooth side of the knife blade (the side without the grooves). Note: Each
time the knife is sharpened, a portion of the serration is being removed. Over a long period of time, the serration on the knife may
be completely removed and you may have a knife blade similar to a utility knife.
Occasionally I see sparks when sharpening my knives. What causes this?
Knives with high carbon content (usually higher quality knives) sometimes will spark when they come in contact with the sharp-
ening wheels. This is normal.
Care and Cleaning
Always unplug the knife sharpener before cleaning and before removing the interchangeable blade guides.
The outside surface of the knife sharpener may be cleaned with a damp cloth. Do not use abrasives. Never immerse the knife
sharpener in water or any other liquid. Do not use any type of lubrication with the EverSharp knife sharpener.
Metal filings from your knives will collect inside the knife sharpener base. Occasionally remove the interchangeable blade guide
by grasping it with both hands, placing your thumbs above the lip (Fig. D) and your fingers on the back of the guide where the
blade descriptions (Heavy, Medium, or Fine) are printed. Push down on the front of the guide with your thumbs and use your
fingers to lift and rotate the back of the guide towards you. That will release the two back hooks. Continue lifting to free the two
front tabs. Then, invert the knife sharpener base, and shake out the metal filings that have collected inside.
Any maintenance, other than the items listed here, should be performed by the Presto Factory Service Department.
Stack the interchangeable blade guides on the knife sharpener base for compact storage. Stack them so the heavy guide is at the
bottom, followed by the medium guide, and then the fine guide. Wrap the cord around them so they stay in place.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Service Information
If you have any questions regarding the operation of your Presto appliance or need parts for your appliance, contact us by any
of these methods:
•Call 1-800-877-0441 weekdays 8:00 AM to 4:30 PM (Central Time)
•Write: NATIONAl PRESTO INDUSTRIES, INC.
Consumer Service Department
3925 N. Hastings Way, Eau Claire, WI 54703-3703
When contacting the Consumer Service Department, please indicate the model number for the knife sharpener and the 4 digit
date code. These numbers can be found on the bottom of the knife sharpener.
Please record this information:
Model Number ____________________ Date Code __________
Date Purchased ______________
Inquiries will be answered promptly by telephone, letter, or email. When writing, please include a phone number and a time
when you can be reached during weekdays if possible.
Any maintenance required for this product, other than normal household care and cleaning should be performed by our Factory
Service Department. Be sure to indicate date of purchase and a description of defect when sending an appliance for repair. Send
appliances for repair to:
CANTON SAlES AND STORAGE COMPANy
Presto Factory Service Department
555 Matthews Drive, Canton, MS 39046-0529
The Presto Factory Service Department is equipped to service all PRESTO appliances and supply genuine PRESTO parts.
Genuine PRESTO replacement parts are manufactured to the same exacting quality standards as PRESTO appliances and are
engineered specifically to function properly with its appliances. Presto can only guarantee the quality and performance of genu-
ine Presto parts. “Look-alikes” might not be of the same quality or function in the same manner. To ensure that you are buying
genuine PRESTO replacement parts, look for the PRESTO trademark.
PRESTO limited Warranty
ThisqualityPRESTOapplianceisdesignedandbuilttoprovidemany
years of satisfactory performance under normal household use. Presto
pledgestotheoriginalownerthatshouldtherebeanydefectsinmaterial
or workmanship during the first year after purchase, we will repair or
replace it at our option. Our pledge does not apply to damage caused
byshipping.Toobtainserviceunderthewarranty,returnthisPRESTO
appliance, shipping prepaid, to the Factory Service Department.When
returning a product, please include a description of the defect and
indicate the date the appliance was purchased.
WewantyoutoobtainmaximumenjoymentfromusingthisPRESTO
appliance and ask that you read and follow the instructions enclosed.
Failuretofollowinstructions,damagecausedbyimproperreplacement
parts, abuse or misuse will void this pledge. This warranty gives you
specific legal rights, and you may also have other rights which vary
from state to state. This is Presto’s personal pledge to you and is being
made in place of all other express warranties.
NATIONAL PRESTO INDUSTRIES, INC.
Eau Claire, WI 54703-3703
Form 72-739C
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|