INSTALLATION INSTRUCTIONS
LPFM1532
Universal Low Profile Flat Mount for 15” to 32” Flat Panels
EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
Phone: 800-368-9700
Fax: 800-832-4888
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2009
9531-201-001-02
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Parts List
Congratulations on the purchase of your new Premier Mounts LPFM1532 flat panel mount. This
mount is shipped with all proper installation hardware and components. Make sure that none of these parts are
missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the
installation and contact Premier Mounts (800) 368-9700.
Adapter Plate (Qty 2)
Wall Plate (Qty 1)
Cover Plate (Qty 1)
M4 x 10mm Combo M4 x 16mm Combo
Head Screw (Qty 6) Head Screw (Qty 6)
M4 x 20mm Combo
Head Screw (Qty 6)
M4 x 30mm Combo
Head Screw (Qty 6)
M4 x 45mm Combo
Head Screw (Qty 6)
M5 x 10mm Combo
Head Screw (Qty 4)
M5 x 16mm Combo
Head Screw (Qty 4)
M5 x 20mm Combo
Head Screw (Qty 4)
M5 x 30mm Combo M5 x 45mm Combo M6 x 10mm Combo M6 x 16mm Combo M6 x 20mm Combo M6 x 30mm Combo M6 x 45mm Combo
Head Screw (Qty 4) Head Screw (Qty 4) Head Screw (Qty 4) Head Screw (Qty 4) Head Screw (Qty 4) Head Screw (Qty 4) Head Screw (Qty 4)
#10 Wall
Anchors (Qty 4)
Thread Depth
Indicator
#10 x 1-1/4” Screws
(Qty 4)
M6 x 8mm Combo
Head Screw (Qty 4)
#10 x 2” Screws Universal Spacers
(Qty 2) (Qty 30)
M5 Flat Washers
(Qty 4)
M4 Flat Washers
(Qty 4)
If your unit requires alternative mounting hardware, use commercially available hardware or contact Premier Mounts (800) 368-9700.
Installation Tools (not supplied)
Electronic Studfinder
Drill
Level
Phillips Screwdriver
1/8” Drill Bit
Installation Instructions
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Wood Stud Installation
Prior to installation, the two (2) M6 x 75mm Phillips head locking screws must be removed. These two screws are located
on the bottom of the LPFM1532.
Visual Centering Diamond - The visual centering diamond will allow you to determine the center of the wood stud. It will also allow
you to determine the exact center for the flat panel placement on the wall. The visual centering diamond
will work in conjunction with the visual stud guide.
Visual Stud Guide - The visual stud guide will allow you to determine exactly where both edges of the wood stud is within the wall.
Once both edges of the wood stud have been located, the visual centering diamond will be directly over the exact
center of the wood stud. Once the plate is in this position, the two mounting holes may be marked.
Directional Arrow
Mark
Visual Centering Diamond
Visual Stud Guide
Stud
Electronic
Studfinder
Center Line
Step 1. Place the wall plate against the wall with
the directional arrow pointing up.
Step 3. Use an electronic studfinder to locate the
stud.
Step 2. Use a pencil to make a mark in the center
of the visual centering diamond. This will
be the center position of the flat panel.
Step 4. Align the plate to the stud and visually
verify the flat panel placement now that
the stud has been located.
Step 5. Once the center of the stud has been
located, mark the wall at the two (2)
screw hole locations.
Visual Stud Guide
#10 x 2” Screws
1/8” Bit
Pilot Hole
Drill
Step 7. Insert two (2) #10 X 2” screws into
Step 6. Use a 1/8” bit and create pilot holes where
the pre-drllied pilot holes.
Step 8. Tighten the wall plate screws at this
time.
the 2 markings were made.
Page 4
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Concrete Surface Installation
You will have four (4) mounting
holes when installing into concrete.
Step 1. Use the visual centering diamond
to help determine the placement of the
back plate.
Step 2. Once the mounting placement has
been determined, use a pencil to mark
the mounting points.
Step 3. Drill the mounting holes using a 1/8”
drill bit where the pencil marks have
been made.
1/8” Bit
Pilot Hole
Step 4. Place the #10 anchor into the hole
and tap into place.
Step 5. Place the backplate over the inserted
#10 anchors.
Step 6. Insert four (4) #10 x 1-1/4” screws
into the #10 anchors and tighten using
a Phillips tip screwdriver.
Pilot Hole
#10 Anchor
#10 x 1-1/4” Screw
Screwdriver
Installation Instructions
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Determining the Mounting Hardware
Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel.
Step 2. Using a pencil, mark the depth of the thread insert on the thread depth indicator (Figure 2).
Step 3. Compare and verify the depth of the remaining thread inserts.
Step 4. Locate the correct diameter screw for the thread insert.
Step 5. Compare your thread depth indicator marking to the screw length.
If your selected screw is longer than
the marking on the thread depth
indicator, do not use this screw. The
screw length must not bypass the
marking. If so, select another screw
size (Figure 2 and 3) until you find the
screw the comes closest to your mark
without going past the marking.
Inverted Flat
Panel Display
When using the universal spacers in
the installation, make sure to account
for the appropriate spacing depth
when measuring with the thread depth
indicator. Using the universal spacers
will change the overall length of the
hardware used.
Marking the
Depth
Thread Insert
Thread Depth
Indicator
Figure 1
Screw
Screw
Marking
Marking
Thread Depth
Indicator
Thread Depth
Indicator
Figure 3
Figure 2
Universal Spacers Installation
You may not need to use any spacers for your particular flat panel.
The universal spacer may be stacked five (5) high, for a total stacking height of 1-1/4”. The universal spacers must be stacked in the
direction shown above. The universal spacers must be placed between the mounting bracket and the flat panel.
The universal spacer will fit M4, M5, M6 and M8 screws sizes.
Page 6
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Cover Plate Installation
Mounting
Hardware
Slotted Opening
Cover
Plate
Securing
Screw
Mounting
Hardware
Mounting
Point
Universal Spacer
Flat Panel
Step 1. Secure the cover plate to the flat panel
using four (4) Phillip screws (supplied).
Step 2. The slotted opening must be facing up
and the flat surface touching the flat
panel surface.
Recessed VESA 75mm/100mm Pattern
Universal spacer stacking is
limited to five (5) spacers max for
each mounting screw.
Step 1. If you have a recessed VESA 75mm/
100mm pattern or need more spacing
between the wall and the flat panel, use
the appropriate number of universal
spacers and corresponding length
mounting hardware.
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
Adapter Plate Installation (Optional)
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
The optional adapter plate can be used if the flat panel has
200mm x 200mm or 200mm x 100mm mounting points (please see
Page 10).
Step 1. Line up the side holes on the adapter plate with the
side holes on the cover plate.
Cover Plate
Mounting Hole
Mounting Hole
M6 x 8mm Phillips
Head Screws
Installation Instructions
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Step 2. Insert four (4; two on each side)
M6 x 8mm screws. Tighten using a
long Phillips head screwdriver.
Phillips Head
Screwdriver
Cover Plate Installation with Adapter Plates Attached (Optional)
200 x 200 Installation
LPFM1532
LPFM1532
Mounting
Hardware
Mounting
Stacked Universal
Hardware
Spacers
Page 8
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
200 x 100 Installation
LPFM1532
Mounting
Hardware
Stacked Universal
Spacers
Mounting
Hardware
Flat Panel Installation
Mounting
Slot
Mounting
Tab
M6 x 75mm Phillips
Head Screws
Screwdriver
The cover plate mounting slot must
be facing up.
Step 1. Lowertheflatpanelontothewallplate so
that the mounting tab is inserted into the
mounting slot.
Step 2. Secure the two plates by inserting and
tightening two (2) M6 x 75mm Phillips
head locking screws located at the
bottom of the cover plate. Use a Phillips
head screwdriver to tighten these
screws.
Do not release the display until you are
sure the flat panel is resting securely on
the wall plate.
Installation Instructions
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Technical Specifications
All measurements are in inches [mm].
B
B
Please refer to the hardware pack that
is included with the LPFM1532 to
determine the correct mounting
hardware for your application.
C
C
A
A
A
A
D
D
D
NOTE: A. 200 X 100 VESA Pattern
M4 x 10mm Phillips
Flat Head screws only.
B. 200 X 200 VESA Pattern
If an M4 is to be used
for location B, an M4
washer must be used
as well.
C. 100 X 100 VESA Pattern
D. 75 X 75 VESA Pattern
D
A
A
C
C
B
B
Page 10
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
LPFM1532
Warranty
PREMIER MOUNTS
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of
the original owner of this product. The limited warranty is valid only for the original purchaser of the product.
What Premier Mounts Will Do
At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is
defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will
be shipped to you at no charge, but you must pay any labor costs.
What is Not Covered; Limitations
PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS, DIS-
PLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN WHOLE OR IN
PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE OF ITS PRODUCTS.
PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. PREMIER
MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUD-
ING BUT NOT LIMITED TO, INABILITY TO USE ITS PRODUCTS OR LABOR COSTS FOR REMOV-
ING AND REPLACING DEFECTIVE PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to
the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original con-
sumer purchaser must accompany all warranty claims. Warranty claims must also include a description of the
problem, the purchaser’s name, address, and telephone number. General inquiries can be addressed to Premier
Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or by fax.
Premier Mounts
Attn: Warranty Claim
3130 East Miraloma Ave.
Anaheim, CA 92806
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE.
Installation Instructions
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
|