INSTALLATION INSTRUCTIONS
PRC
LCD Ceiling Mount
AUSTRALIA, NEWZEALAND,
OCEANIA (DISTRIBUTOR)
P.O. Box 295
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
Mordialloc Victoria 3195
Australia
Phone: 03 9586 63 30
Phone: 800-368-9700
Fax: 800-832-4888
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2008
9533-004-001-07
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
Parts List
This ceiling mount is shipped with all proper installation hardware and components. Make sure that none of these
parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please
stop the installation and contact Premier Mounts (800-368-9700).
Please review all WARNING and CAUTION statements (see Page 8) before beginning the installation of the PRC.
AST-2446 (Qty 1)
PRC-LA (Qty 1)
The AST-2446 is not included with the PRC-LA.
Customers may purchase the AST-2446 separately
or use a custom length of 1-1/2” NPT.
M4 x 10mm Phillips
Pan Head (Qty 4)
M6 x 8mm Set
Screw (Qty 1)
M4 x 10mm Flat
Head Phillips
Screws (Qty 6)
UFP-220 Adapter
Plate (Qty 1)
M4 x 5mm Phillips
Screws (Qty 4)
Installation Tools
Phillips Head Screw Driver
Pencil
Soft Material/ Blanket
Tape Measure
M3 Allen Wrench (Supplied)
Socket Wrench
14mm Socket (Supplied)
¾” Open-End Wrench
Level (Supplied)
Installation Manual
Page - 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
Features:
The PRC-LA allows tilt and pivot adjustments ±15° from center, 360° side-to-side swivel, and cable access. The
AST-2446 allows height adjustment from 24 to 46 inches. Plus it also features two cable access openings.
PRC-LA
M6 x 6mm
Set Screw
Coupler
Sw i vel Lo ck
Keyhole Mount
Opening
KeyholeMount
Opening
VESA 75 x 100
Mounting Points
Ceiling Plate
Ceiling Plate
Cable Access
Opening
Cable Access
Opening
Lower Tube
The AST-2446 may be substituted for a custom pre-cut length of threaded 1-1/2” NPT pipe.
Page - 4 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
AST-2446 Installation
If the AST-2446 will not be used to
mount the PRC, then a suitable piece
of threaded pipe can be used. These
instructions will tell the user how to
mount an AST-2446 to the ceiling. If
a custom piece of threaded pipe is
used, it is the responsibility of the
user to determine how best to mount
the PRC and pipe.
Single Stud Installation
–
Wood screws
(Commercially Available)
Solid Surface Installation – Concrete wedge
anchors (Commercially Available)
1. Secure the ceiling plate to the ceiling
structure.
2. Use suitable hardware (commercially
available) depending on your installation
environment to secure the two (2, or 4,
depending on the structure) mounting
points found on the ceiling plate to the
ceiling structure.
Ceiling Surface
Ceiling Plate
Mounting
Hardware
Four Outer Points
are f or Sol i d Su r f ace
Installation
Two Inner Points
ar e f o r Si n g l e St ud
Installation
3. To adjust the height of the AST-2446,
remove the adjustment screws (Page 4),
determine the desired height, and re-insert
the adjustment screws to lock the AST-2446
into the desired position.
Installation Manual
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
PRC Installation
Adjust able Suspension
Adapter
1. Screw the PRC-LA coupling adapter to the
AST-2446 adapter or 1½" (NPT) Pipe.
2. Secure the coupling with the M6 set screw
(supplied).
Coupling
Keyhole Opening
Mounting Plate
Display Installation
1. Place the display on a soft flat surface, face down.
2. Insert the two upper screws (thread on 3 turns). Do
not insert the lower screws at this time.
Mounting Hardware
Display
3. Lift the display and carefully guide the display with
the two screws into the keyhole openings.
Keyhole
Opening
4. Let the display rest in this position while you insert
the lower mounting screws.
5. Tighten both the upper and lower mounting
screws at this time.
Do not over tighten the screws to the
monitor. Failure to do so could result
in damaging the monitor or the
mounting points.
Lower
Mounting
Screw s
If your flat panel has a 200mm x 100mm
mounting pattern, the UFP-220 Adapter
Plate must be used.
Page 6
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
UFP-220 Adapter Plate (Optional Installation)
1. Attach the UFP-220 Adapter Plate to the back of the display
using the six (6) M4 x 10mm flat head screws.
Tension Adjustment
1. Swivel Adjustment – Use a ¾” wrench to tighten and
loosen the swivel adjustment.
2. Attach the PRC mounting plate to the back of the
UFP-220 using the four (4) M4 x 5 mm screws.
2. Tilt Adjustment - Use a 14mm socket to tighten and
loosen the tilt adjustment.
3. After everything has been tightened and the orientation has
been determined, tighten the set screw using the supplied
M3 Allen wrench.
M6 x 6mm Set
Screw
M4 x 10mm Flat
Head Screws
Sw i vel Ten si o n
M4 x 5mm Phillips
Head Screws
UFP-220
Tilt Tension
Technical Specifications
All measurements are in inches (mm).
Installation Manual
Page - 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PRC
Warranty
PREMIER MOUNTS
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
Premier Mounts warrants this product to be free from defects in material and workmanship for the lifetime of
the original installation of this product. The limited warranty is valid only for the original purchaser of the
product.
What Premier Mounts Will Do
At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is
defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will
be shipped to you at no charge, but you must pay any labor costs.
What is Not Covered; Limitations
PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS, ADAPTERS,
DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY RESULTING, IN
WHOLE OR IN PART, FROM IMPROPER INSTALLATION, MODIFICATION, USE OR MISUSE
OF ITS PRODUCTS.
PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO USE ITS
PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE PRODUCTS
OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in writing to
the address below within thirty (30) days. Proof of purchase (an original sales receipt) from the original
consumer purchaser must accompany all warranty claims. Warranty claims must also include a description of
the problem, the purchaser’s name, address, and telephone number. General inquiries can be addressed to
Premier Mounts Customer Service at 1-800-368-9700. Warranty claims will not be accepted over the phone or
by fax.
Premier Mounts
Attn: Warranty Claim
3130 E. Miraloma Avenue
Anaheim, CA 92806
How State Law Applies
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Installation Manual
Page - 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|