INSTALLATION MANUAL
PDS-PLUS
Versatile Projector Mount
Model: PDS-PLUS
AUSTRALIA, NEW ZEALAND, OCEANIA
(DISTRIBUTOR)
NORTH AMERICA
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada –
Phone: 800-368-9700
Fax: 800-832-4888
EUROPE
Swallow House,
Shilton Industrial Estate,
Shilton, Coventry, England CV79JY
Phone: +44 (0) 2476 614700
Fax: +44 (0) 2476 614710
P.O. Box 295
Mordialloc Victoria 3195
Australia
Phone: 039586 6330
Other Locations – Phone: (001)-714-632-7100; Fax: (001)-714-632-1044
©Premier Mounts 2008
9530-009-011-05
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Parts List
Please familiarize yourself with all components contained herein.
Please review all WARNING and CAUTION statements (see Page 2) before beginning the installation of the PDS-PLUS
Mount.
M6 x 12mm Phillips
Pan Head w/
Integrated Split
PDS Base Box (Qty 1)
Washer (Qty 12) – 6
come preinstalled on
the PDS Base Box
#14 x 2” Wood
Screws (Qty 2)
Nylon Spacer (Qty 2)
Flat Washer (Qty 2)
M6 x 8mm Socket
Head Set Screw
(Qty 1)
Lock-It™ Security System
M6 x 12mm Security
Screw (Qty 12) -
Included in the
Escutcheon Ring
(Qty 1)
LOCK-IT™ packet
External Tooth Lock
Washers (Qty 4)
M6 x 8mm Security
Set Screw (Qty 1)
M5 Security Allen
Wrench (Qty 1)
M3 Security Allen
Wrench (Qty 1)
Installation Manual
Page - 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Parts List (cont.)
PDS-PLUS
Base
(Qty 1)
Plastic Barrel Caps
(Qty 8)
Mounting Legs
– Long (Qty 4)
Mounting Legs –
Short (Qty 4)
Standard
Lock-It™ Security
M2.5 x 12mm
Security Head
Screw (Qty 4)
M2.5 x 12mm Phillips
Head Screw (Qty 4)
M3 x 16mm
Security Head
Screw (Qty 4)
M3 x 16mm Phillips
Head Screw (Qty 4)
M3 Flat Washer
(Qty 10)
M3 Flat Washer
(Qty 10)
M4 x 12mm
Security Head
Screw (Qty 4)
M4 x 12mm Phillips
Head Screw (Qty 4)
M5 x 12mm
Security Head
Screw (Qty 4)
M5 x 12mm Phillips
Head Screw (Qty 4)
M6 x 12mm
Security Head
Screw (Qty 8)
M6 x 12mm Phillips
Head Screw (Qty 8)
¼-20 x 5/16” Phillips
Head Screw (Qty 1)
¼-20 x 5/16” Security
Head Screw (Qty 1)
Page - 4 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Installation Tools
Portable Drill
Soft Material/ Blanket
Pencil
Tape Measure
Ladder
Phillips Head Screw Driver
M5 Security Allen Wrench (Supplied)
M3 Security Allen Wrench (Supplied)
1/8” Drill Bit (Wood Installation – Commercially Available)
Masonry Bit (Concrete Installation – Commercially Available)
Installation Manual
Page - 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Optional Mounting Configurations
This section will contain different configurations, if applicable, that the PDS-PLUS can be used with. The CLS adapter will be used in
conjunction with the PP-FCTA and the PP-FCMA. Please refer the Installation Instructions that come packaged with the following
products.
PP-FCTA
PP-FCMA
Standard 1-1/2” NPT
AST-2446
APP-2446
AST-1321
Page - 6 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Ceiling Installation – Pipe
Unpack the PDS-PLUS Mount and familiarize yourself with the components. Please take time before you install the PDS-PLUS to
determine the location of where the PDS-PLUS will be mounted.
The PDS-PLUS may be attached to 1-1/2” standard threaded pipe (NPT), to one of Premier Mount’s optional ceiling
adapters (see page 6), or to a single wood stud (see Page 8). If using an optional adapter, please refer to the installation
instructions that come with adapters.
1. After the pipe has been properly secured to the ceiling structure, thread the base box to the lower portion of the pipe.
PDS Base Box
M3 Allen Wrench
2. Secure the base box to the pipe with the M6 x 8mm set screw and tighten it down using the M3 Allen wrench (supplied).
Installation Instructions
Page - 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Ceiling Installation – Solid Surface
Upper Bridge
M6 x 8mm Set Screw
Base Box
1. Separate the Upper Bridge from the Base Box by removing the six (6) M6 x 12mm Phillips head screws (three on each side).
Wood Ceiling Stud
Ceiling Surface
Mounting Slot
Upper Bridge
#14 x 2”Wood Screws
2. Use the appropriate slot openings for single wood stud mounting, depending on your ceiling configuration. The adjustable
channel slots on the upper bridge plate will allow you to fine tune the final orientation of the projector.
3. Secure the Upper Bridge to the center of the stud on the ceiling structure at this time using two (2) #14 x 2” wood screws
(supplied).
Page - 8 -
Installation Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Ceiling Wood Stud
M6 x 12mm Phillips
Head Screw
Ceiling Surface
Base Box
4. Attach the base box to the upper bridge and secure with the six (6) M6 x 12mm Phillips Head screws (above). DO NOT
OVERTIGHTEN THESE SCREWS AT THIS TIME.
Concrete Mounting
The PDS-PLUS can be mounted to a ceiling with a minimum 6” thickness. Concrete wedge anchors must be used for
concrete installation. It is recommended that ¼” wedge anchors be used. A masonry bit must be used to drill the pilot hole.
These can be purchased at your local hardware store.
1. Begin by placing the upper bridge into position against the ceiling, keeping it level.
2. Mark off four holes to be used for securing the mount and place the upper bridge aside.
3. Next, drill holes using the appropriate masonry bit for your anchor.
4. Insert a concrete anchor into each hole.
5. If necessary, a hammer can be used to lightly tap each anchor into place so that they are flush with the ceiling.
6. Once all of the anchors are in place, move the upper bridge back into position.
7. Attach the nut onto the threaded shaft that is protruding from the ceiling.
8. Do not tighten until all nuts are in place.
Installation Instructions
Page - 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Attaching the PDS-PLUS to the Projector
To truly show the versatility of the PDS-PLUS, the following pictures will show a variety of configurations that can be
achieved with the PDS-PLUS. Your individual application will depend on the purchased projector.
To truly show the versatility of the ELE-UPROJB, the following pictures will show a variety of configurations that can be
achieved with the ELE-UPROJB. Your individual application will depend on the purchased projector.
1. Locate the mounting points on the bottom of the projector (see arrows above for sample mounting points).
Selecting the Proper Mounting Hardware
1.
2.
3.
Turn the projector over and locate the mounting points.
Test each size of the screws provided.
The correct screws should thread easily into the mounting point and not pull out when pressure is applied.
DO NOT OVERTIGHTEN YOUR MOUNTING SCREWS TO THE PROJECTOR CHASSIS. USING THE
INCORRECT SCREW DEPTH MAY CAUSE DAMAGE TO YOUR PROJECTOR.
The optional M3 flat washers may be used to decrease the screw depth of either the M2.5 x 12mm screws or the M3 x
16mm screws. Place a M3 flat washer inside the leveling barrel and then insert the mounting screw. DO NOT
OVERTIGHTEN THIS SCREW.
Lock-It™ Security Hardware Pack (Optional)
The PDS-PLUS comes with the option of using Lock-It™ Security Screws. To use the security screws, simply replace
the M6 x 12mm Phillips Pan head screws with the M6 x 12mm security screws. Once the hardware has been changed,
adjust the PDS-PLUS and tighten down the M6 x 12mm security screws using the M5 Security Allen wrench (supplied).
Page - 10 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Only attach to the projector manufacturer’s specified mounting points on the projector chassis with a minimum of three
mounting legs. Please follow all safety instructions specified by the projector manufacturer as well as the safety
instructions outlined in this manual.
Depending on your application, the long mounting legs and the short mounting legs may be used together. There are
multiple configurations that may be used combining the long mounting legs with the short mounting legs.
2. Attach the appropriate number of mounting legs to the projector using the corresponding mounting hardware (see Page 10, Selecting the Proper
Mounting Hardware).
3. If the mounting legs need to be leveled, rotate the leveling barrels to level the mounting bracket.
4. To raise the mounting legs, rotate the leveling barrel clock-wise. To lower the mounting leg, rotate the leveling barrel counter clock-wise.
5. When the desired position is achieved, tighten the mounting screws to the projector and then tighten the hex head leg screws with the M5 Allen
wrench.
Projector Plate
Mounting Leg
Square Nut
6. Position the legs accordingly for best configuration. You may raise or lower each leg independently by turning the leveling
barrels.
7. Secure the legs to the projector plate by screwing M6 x 12mm security screws into the M6 square nut (do not overtighten) on the
mounting legs.
Installation Manual
Page - 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Single Mounting Point Installation
Mounting Point
If your projector has only one mounting point, a ¼-20 x 5/16” 2. Place the projector plate over the mounting point.
screw must be used to attach the mount to the projector. Please 3. Insert the ¼-20 x 5/16” security screw.
refer to the following three steps:
1. Determine where the mounting point is located.
This screw will use a standard hole when mounting.
Attaching the PDS-PLUS Base
PDS Base Box
Hinge Pin
PDS-PLUS
Base
1. Raise the projector (with the mounting bracket attached) and hook the projector bracket over the hinge pins.
Installation Manual
Page - 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
2. Slide the projector forward (see arrow above).
3. Make sure the bracket is resting on the Base Box before letting go of the projector.
Installation Manual
Page - 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Hinge Pin and
Nylon Spacer
4. Place the nylon spacer over the hinge pin.
M6 x 12mm Phillips
Head Screw
w/Integrated Washer
Hinge Pin Nylon
Spacer and Washer
5. Secure the PDS-PLUS to the PDS Base Box with two (2) M6 x 12mm Phillips Head screws w/Integrated Washers (one on each
side).
If using the optional Lock-It™ Security Hardware Pack, secure the PDS-PLUS to the PDS Base Box with two (2)
M6 x 12mm Security Head screws and two (2) flat washers (one on each side).
Installation Manual
Page - 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
M6 x 12mm Phillips
Head Screw
w/Integrated Washer
Hinge Pin Screw
and Washer
6. Once the mount is safely attached, insert and tighten the four (4) M6 x 12mm Phillips Head Screw w/ Integrated
Washers.
7. Make all final adjustments at this time.
Base Box Adjustment
Roll
Tilt
1. You can adjust the roll of the projector by loosening the three (3) front and rear M6 x 12mm screws.
Do not fully loosen the screws, as the mount may drop.
2. Set the desired roll and then tighten the screws. First tighten the center screws and work your way to the outside screws,
making any final adjustments prior to tightening the last two screws.
3. You can adjust the tilt of the projector by loosening the two (2) M6 x 12mm screws on each side of the Base Box.
4. Set the desired tilt and then tighten the screws, making any final adjustments prior to tightening the last two screws.
If your projector is not holding the tilt, install the four(4) internal/external tooth lock washers on the four
(4) M6 x 12mm Phillips head screws w/ Integrated Washers.
5. Once all adjustments have been made, tighten all hardware.
Page - 15 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Technical Specifications
All measurements are inches (mm).
Installation Manual
Page - 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PDS-PLUS
Warranty
PREMIER MOUNTS
LIMITED LIFETIME WARRANTY
What and Who is Covered by this Limited Warranty and for How Long
Premier Mounts warrants this product to be free from defects in material and workmanship for the
lifetime of the original owner of this product. The limited warranty is valid only for the original
purchaser of the product.
What Premier Mounts Will Do
At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part
that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement
product or part will be shipped to you at no charge, but you must pay any labor costs.
What is Not Covered; Limitations
PREMIER MOUNTS DISCLAIMS ANY LIABILITY FOR DAMAGE TO MOUNTS,
ADAPTERS, DISPLAYS, PROJECTORS, OTHER PROPERTY, OR PERSONAL INJURY
RESULTING, IN WHOLE OR IN PART, FROM IMPROPER INSTALLATION,
MODIFICATION, USE OR MISUSE OF ITS PRODUCTS.
PREMIER MOUNTS DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A
PARTICULAR PURPOSE. PREMIER MOUNTS IS NOT RESPONSIBLE FOR INCIDENTAL
OR CONSEQUENTIAL DAMAGES, INCLUDING BUT NOT LIMITED TO, INABILITY TO
USE ITS PRODUCTS OR LABOR COSTS FOR REMOVING AND REPLACING DEFECTIVE
PRODUCTS OR PARTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
What Customers Must Do for Limited Warranty Service
If you discover a problem that you think may be covered by the warranty you MUST REPORT it in
writing to the address below within thirty (30) days. Proof of purchase (an original sales receipt) from
the original consumer purchaser must accompany all warranty claims. Warranty claims must also
include a description of the problem, the purchaser’s name, address, and telephone number. General
inquiries can be addressed to Premier Mounts Customer Service at 1-800-368-9700. Warranty claims
will not be accepted over the phone or by fax.
Premier Mounts
Attn: Warranty Claim
3130 E. Miraloma Avenue
Anaheim, CA 92806
How State Law Applies
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
Page - 17 -
Installation Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
|