Standard Commercial Treadmill
Owner’s Manual
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
IMPORTANT SAFETY INSTRUCTIONS
• Never step off the treadmill while the running belt is moving. Keep your body and
head facing forward. Never attempt to turn around on the treadmill.
• Never turn ON the treadmill when someone is standing on the machine.
• Never block the air openings on the hood while operating the treadmill. Keep the
air openings clean and free of lint, hair, or anything that might impeded the free
flow of air. Never drop or insert objects into any opening.
• Wear proper exercise clothing and shoes during a workout—no loose clothing.Tie
long hair back. Keep all loose towels away from the running surface.The running
belt will not stop immediately if an object becomes caught in the belt or rollers.
• Do not rock the unit. Do not stand on the display console or hood.
• Do not overexert yourself or work to exhaustion. If you feel any pain or abnormal
symptoms, stop your workout immediately and consult your physician.
SAFETY APPROVAL
When identified with the ETL-c logo, the treadmill has been tested and conforms to the require-
ments of CAN/CSA-E-335-1/3-94, Safety of Household and Similar Electrical Appliances.
GROUNDING INSTRUCTIONS
The C936i treadmill must be grounded. If it should malfunction or break down, grounding
provides a path of least resistance for electric current which reduces the risk of electrical
shock. The C936i treadmill is equipped with a power cord having an equipment-grounding
conductor and a grounding plug.The plug must be inserted into an appropriate outlet that is
properly installed and grounded in accordance with all local codes and ordinances. If you do
not follow these Grounding Instructions, you could void the Precor Limited Warranty.
Improper connection of the equipment-grounding conductor can
DANGER —
result in a risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the treadmill is properly grounded. Do
not modify the plug provided with the treadmill. If it doesn’t fit the outlet, get a proper
outlet installed by a qualified technician.
Diagram 1
Correct power
outlet for U.S.
Markets:
120-volt and
240-volt plugs.
120-volt grounding plug
240-volt grounding plug
120V Units and 240V Units Designated for U.S. Markets
The C936i treadmill must be connected to a dedicated, grounded circuit. A 20 amp dedicated
circuit is recommended. The treadmill is factory-equipped with a specific power supply cord to
permit connection to a proper electric circuit as shown in Diagram 1.Make sure that the treadmill
is connected to an outlet having the same configurations as the plug.No adapter should be used
with this product.
page 3
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Table of Contents
Important Safety Instructions ..........................................2
Safety Approval ..................................................................... 3
Grounding Instructions ........................................................... 3
Radio Frequency Interference (RFI) ........................................ 6
European Applications ........................................................... 6
Obtaining Service................................................................... 7
About this Manual .................................................................. 7
Unpacking theTreadmill ..................................................9
Standard Equipment............................................................... 9
Other Equipment .................................................................... 9
Hardware Kit .......................................................................... 10
AdditionalTools Needed ......................................................... 10
Setting Up theTreadmill .................................................11
Installation Requirements ....................................................... 11
Assembly Instructions ........................................................... 11
Turning the Unit ON and OFF ................................................. 21
Checking the Alignment of the Running Belt........................... 22
Club Information.............................................................23
Changing the Club Settings .................................................... 23
Determining the Units of Measure .......................................... 24
Determining the Club Speed Limit .......................................... 25
Setting a Workout Time Limit.................................................. 25
Setting a Pause Time Limit .................................................... 25
Viewing the Odometer, Hours of Use,
SoftwareVersion, Error Log and Serial Number ...................... 26
Using CSAFE Standard Equipment ........................................ 27
The C936i Display...........................................................28
Features on the Display Console............................................ 28
SmartRate® Display ............................................................... 29
Setup Mode and Prompts ...................................................... 29
The Setup Mode and the QuickStart Feature......................... 30
Display Features During a Workout........................................ 31
Keys on the Display Console ................................................. 33
Changing the Display Features Using the SELECT Key ........ 35
page 4
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Table of Contents
Exercising on theTreadmill............................................36
Using the Security Clip........................................................... 36
Using the Handrails ................................................................ 36
Using the Heart Rate “Touch”Capability ................................. 36
Keypad Tips ........................................................................... 37
Workout Tips.......................................................................... 37
Quick Steps to Working Out ................................................... 37
Cooling Down After a Workout ............................................... 39
Pause, Workout Summary, and Exit Features ........................ 40
Programs ........................................................................41
The Heart Rate Feature.......................................................... 41
Using the SmartRate® Feature ............................................... 41
Manual Mode and the QUICKSTART Key ............................... 42
Cross Country Program .......................................................... 43
Interval Program..................................................................... 43
Weight Loss Program ............................................................. 44
Random Program ................................................................... 44
Heart Rate Program ............................................................... 45
Maintenance ...................................................................46
Inspection .............................................................................. 46
Cleaning the Equipment ......................................................... 46
Aligning the Running Belt ....................................................... 47
Storing the Chest Strap .......................................................... 48
Servicing theTreadmill ........................................................... 48
LongTerm Storage ................................................................. 48
CommercialWarranty Registration Card ................................. 49
CommercialWarranty ............................................................. 51
Specifications ............................................................back cover
page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
RADIO FREQUENCY INTERFERENCE (RFI)
Federal Communications Commission Part 15
The treadmill has been tested and found to comply with:
•
•
The IEC EMC Directive (international electromagnetic compatibility certification)
The limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a commercial installation.The treadmill generates, uses, and
can radiate radio frequency energy and, if not installed and used in accor-
dance with the owner’s manual instructions, may cause harmful interference
to radio communications. Operation of the treadmill in a residential area is
likely to cause harmful interference. If this occurs, the user will be required to
correct the interference at his or her own expense.
Per FCC rules, changes or modifications to the
treadmill not expressly approved by Precor, could
void the user’s authority to operate the equipment.
CAUTION —
Canadian Department of Communications
This digital apparatus does not exceed the Class A limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the Canadian
Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioéélectriques dépassant
les limites applicables aux appareils numériques de la Class A prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le ministére des Communica-
tions du Canada.
EUROPEAN APPLICATIONS
This product conforms to the requirements of the European Council Directive 89/336/
EEC, Electromagnetic Compatibility and has been tested to the following standards:
EN55022, Limits & Methods of Measurement of Radio Interference, Information
Technology Equipment. In a domestic environment, this product may cause radio
interference, in which case the user is responsible to take adequate measures to
alleviate the interference.
EN50082-1, Generic Immunity Standard for Residential, Commercial and Light
Industrial Products.
ThisproductadditionallyconformstotherequirementsoftheEuropeanCouncilDirective
73/23/EEC, LowVoltage Directive and has been tested to the following standard:
IEC 335-1, Safety of Household and similar Electrical Appliances.
page 6
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
OBTAINING SERVICE
Do not attempt to service the treadmill yourself except for the maintenance tasks
described in this manual. The treadmill does not contain any user-serviceable
parts. For information about product operation or service, visit the Precor Web
Customer Support Representative at 1-888-665-4404.
To help customer support personnel expedite your call, have your serial number
available.The serial number can be found on the shipping container or on the label
near the power receptacle. If you have any questions regarding the treadmill, use
the model and serial numbers whenever you call a Precor dealer or Commercial
Products Customer Support Representative.
Model number: C936i
Unit number: _____ Serial number: _____________________________
Unit number: _____ Serial number: _____________________________
Unit number: _____ Serial number: _____________________________
ABOUT THIS MANUAL
This manual includes instructions for installing and using the treadmill.To maxi-
mize the use of the treadmill, please study this manual thoroughly. The manual
uses the following conventions for identifying special information:
Note: Contains additional information.
Important: Indicates information to which you should pay special attention.
CAUTION: Indicates steps or information necessary to prevent harm to
yourself or damage to the equipment.
WARNING:Provides instructions to prevent electrical damage to the equip-
ment and injuries to yourself.
DANGER: Indicates steps you must take to prevent electrical shock.
page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Notes:
page 8
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Unpacking the Treadmill
Thank you for purchasing the Precor C936i treadmill. Built to the exacting stan-
dards of the health club environment, the treadmill is intended for commercial
use and can withstand the rigors of daily club use with little maintenance.
Important: Before using the treadmill, we urge you to familiarize yourself and
your staff with the entire Owner’s Manual. Understanding this manual will help
you and your customers use the treadmill safely and successfully.
Your treadmill is carefully inspected before shipment so it should arrive in good
operating condition. Precor ships the unit in the following pieces:
❑
❑
❑
❑
Base frame assembly
Right and left upright supports
Display console
❑
❑
❑
Power cord
Hardware kit
Owner’s Manual
Right and left handrails
CAUTION: This unit weighs over 320 pounds (146 kilograms). To prevent
injury to yourself or damage to the equipment, obtain appropriate assis-
tance before removing the unit from the pallet.
If any items are missing, refer to Obtaining Service on page 7.
STANDARD EQUIPMENT
The treadmill incorporates the Precor SmartRate® and Heart Rate features into
its display console. Devices, such as FitLinxx®, that are CSAFE compatible, can
also be attached.
The Precor “touch” heart rate is standard on the C936i and provides two metal
strips, called “grips,” on the center portion of the handrails. When a user places
both hands on the grips, a heart rate is transmitted to the receiver.
Note: If a user does not wish to use the touch-sensitive hand grips, an optional
chest strap can be purchased and worn. The chest strap transmits the user’s
heart rate and it appears as a number in the HEART RATE display.
Important: The user must place the left hand on the left handrail grip and their
right hand on the right handrail grip to transmit their heart rate. Placing one
hand on a grip does not provide sufficient signal to display the user’s heart rate.
OTHER EQUIPMENT
Optional equipment available through your dealer includes:
Chest strap.
•
If you are interested in obtaining Precor option kits for your unit, check with your
dealer. For customer support, see Obtaining Service on page 7.
page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
HARDWARE KIT
After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and
make sure that you have the following items:
❑
❑
❑
❑
❑
❑
❑
❑
(A) four 2-inch long socket head screws — mount upright supports to base
(B) four barrel spacers — place on 2-inch screws
(C) ten ¾-inch long socket head screws
(D) sixteen flat washers
(E) two 1¼-inch socket head screws — handrail clamp assembly
(F) four large diameter washers — place on handrail end cap screws
(G) four 1-inch socket head screws — handrail mounting bracket
(H) ¼-inch hex key — 3 inches by 10 inches
If any items are missing, refer to Obtaining Service on page 7.
Note: After assembling the treadmill, you will have four ¾-inch long socket head
screws (C) and two flat washers (D) remaining.You can discard them if you wish.
Also, be sure to store the hex key in a secure place. It is used for specific main-
tenance procedures that are described in the manual.
Hardware kit.
Diagram 2
A
C
E
G
B
D
F
H
ADDITIONAL TOOLS NEEDED
Obtain the following tools before assembling the treadmill.
❑
❑
Wire cutter
❑
❑
½-inch box end wrench
String
Bubble level
page 10
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Setting Up the Treadmill
You do not need any special knowledge or experience to set up the treadmill.
However, because of the size and weight of the treadmill, you will need to obtain
assistance.
INSTALLATION REQUIREMENTS
Follow these installation requirements when installing the treadmill. If you do not
install the treadmill according to the following guidelines, you could void the Precor
LimitedWarranty.
•
Set up the treadmill on a solid, flat surface. Unpack and assemble the
treadmill close to where you plan to use it. Make sure that the flat surface
under the unit is smooth and level.A level unit is required for the user’s safety
and proper operation.
•
•
Provide ample space around the unit.Open space around the unit makes
for a safer mount and dismount.
Fill out and mail the warranty registration card. Be sure that the treadmill
is turned OFF.The serial number can be found on the shipping container or on
the label near the power receptacle.Write the serial number onto the Precor
Limited Warranty registration card found on the back cover of this manual.
Refer to Obtaining Service on page 7 and write the number(s) there as well.
•
Use the appropriate voltage, dedicated circuit, and grounding as speci-
fied on the treadmill. The treadmill is available in both 120-volt and 240-volt
models. Refer to the treadmill’s identification label to determine the voltage
that your treadmill requires. Both the 120-volt and 240-volt models require a
dedicated circuit. A 20 amp circuit is recommended.
CAUTION: Do not use a non-grounded outlet or transformer. Do not
remove or otherwise bypass the plug with an adapter. Electrical
damage can occur and void the Precor LimitedWarranty if the treadmill
is connected to an improper power source.
ASSEMBLY INSTRUCTIONS
Take the following steps to assemble the treadmill.
1. Obtain adult assistance.Have your assistants help place the shipping carton
close to the location where you plan to use the treadmill. Break down the side
walls of the shipping carton so that they lie flat. Remove the loose contents.
CAUTION: To avoid injury and ensure your safety, get assistance
before lifting the treadmill off the pallet and rolling it onto the floor. Do
not drop the unit.
2. Make sure that the power switch is OFF.Check the ON/OFF power switch
on the front of the treadmill. Place the switch in the O (OFF) position. Make
sure that the treadmill is not plugged into a power source.
page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 3
Lift the rear of the
unit and roll it to
its assembly
location.
Rear cover of unit
Lift the unit by
placing hands
on opposite
sides of the rear
cross brace
found under
treadmill’s
running belt.
3. Move the treadmill. Diagram 3.To properly lift the rear end and roll it on its
front wheels, review Diagram 3.To avoid injury to yourself or damage to the
unit, ask for help in placing the treadmill where you plan to use it.
Diagram 4
Remove the
shipping
fasteners from
the front plate.
Shipping
fasteners found
on right and left
sides of the front
panel.
Front panel
4. Remove the shipping fasteners from the front panel. Diagram 4.With the
supplied hex key and a ½-inch box end wrench, loosen and remove the four
bolts, washers and nuts on the front panel.These fasteners are used during
shipping to hold the front panel in place. Discard the fasteners.
5. Remove any tape or wire ties that secure the display cable to the side of
the unit.
CAUTION:To avoid damage to the display cable, read the following steps
carefully. Damage to the cable due to improper assembly is not covered
by the Precor LimitedWarranty.
page 12
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 5
Route the cable.
Display cable
Right side
mounting
bracket
Route cable
through hole.
Right side
upright support
6. Route the display cable. Diagram 5. Unwrap the cable and remove any
kinks. Have an assistant hold the right upright support close to the base
while you route the cable through it.
Note: Attaching a string to the cable with a washer tied to the opposite end
of the string may help you route the cable through the upright support.
Attach the
upright supports.
Diagram 6
1
Display cable
Right side
upright support
Left side upright
support (Step 8)
2
Upright support
Attach this right
side support first.
Front panel
¾-inch screws (C)
with washers (D)
2-inch screws (A),
washers (D),
3
barrel spacers (B)
7. Attach the right side upright support to the base assembly. Diagram 6, #1.
Take the following steps to align the right side upright support with the base
assembly mounts while your assistant keeps tension on the cable:
Important:Do not securely tighten the screws until after the unit has been fully
assembled. Make sure that the bolt and spacer do not pinch the cable.
a. Place a washer (D) onto each of two ¾-inch screws (C). Thread the screws
through the front panel and into the upright support. Leave room for adjust-
ments.
b. Place a washer (D) and barrel spacer (B) on each of two 2-inch screws (A).
See Diagram 6, #3.Insert the screws through the upright support and thread
them into the base mounts.
page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
8. Attach the left side upright support to the base assembly. Refer to
Diagram 6. Align the upright support with the base assembly mounting
bracket and secure it by following steps 7a and 7b.
Diagram 7
Install the
display console.
Display console
Display console
mounting
brackets
Upright
support
9. Secure the display console to the upright supports. Diagram 7.
a. Make sure that the cable is routed through the top of the upright support.
Have an assistant hold onto the cable (see inset).
Diagram 8
Secure the
display console.
1
CSAFE
receptacle
Cable receptacle
Display console
2
1-inch screws (G)
with washers (D)
Tighten the
screws, but
leave room for
adjustments.
3
b. Align the display console with the upright support mounts. Insert two 1-inch
screws (G) with washers (D) and finger tighten. Do the same for the oppo-
site upright support. Do not fully tighten the screws. Refer to Diagram 8, #1.
c. Attach the cable connector by sliding it into its receptacle underneath the
console. A definite “click” is heard when the cable is properly attached. Refer
to Diagram 8, #2. If you do not hear and feel the connector “snap” into place,
reinsert it.
Important:Do not use the receptacle covered by the plastic plug.This CSAFE
receptacle is for a separate option.
d. So that the cable does not hang below the console, slide it into the clip found
underneath the console. Refer to Diagram 8, #3.
page 14
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 9
Raise the
incline.
Side rail
Incline lift
TIME
PROFILE
DISTANCE
CALORIES
INCLINE
CALORIES
METS
SPEED
/
MINUTE
QUICKSTARTTM
key
Important: With the handrails attached, the width of the treadmill is 33½
inches (85 cm). It will not fit through a standard 32-inch doorway.
10. Prepare the unit for handrail installation. Diagram 9.For an easier installation,
raise the incline to its maximum height by taking the following steps:
a. Plug the treadmill into a power outlet and turn the unit ON.
b. Stand to the side of the treadmill and press QUICKSTART (see inset).
After a few seconds, the running belt begins moving.
c. Press the INCLINE ▲ key until the display shows an incline of 15 percent.
d. Once the lift stops moving and the display indicates 15 percent, press
the Stop (red) button and turn power switch OFF.
Diagram 10
Remove the
lower handrail
clamp.
Lower handrail
clamp
Loosen and
remove the four
handrail clamp
screws.
11. Remove the lower handrail clamp. Diagram 10. To prepare the unit for
handrail installation, remove the four fasteners securing the lower handrail
clamp. Use the hex key provided.
page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Secure the handrails.
Diagram 11
2
¾-inch screw (C)
with washer (F)
Side bracket
Handrail clamp
Slide handrail into
position.
1
Lower portion of
handrail
3
¾-inch screws (C) with washers (D)
12. Attach handrails to the side and base brackets. Diagram 11.
Important: Attach one handrail at a time. Take the following steps on one
side of the treadmill and then, attach the opposite handrail.
a. Slide the end of the handrail toward the handrail clamp.Ask your assistant
to hold the handrail in place while you insert screw (C) with washer (F).
Finger tighten the screw to secure the handrail to the side bracket. See
Diagram 11, #1 and #2.
b. Attach the lower portion of the handrail. Diagram 11, #3. Align the handrail
bracket with the two base mounting holes in the side rail.Place a washer (D)
onto each of two screws (C) and insert the screws. Finger tighten.
c. Perform steps a. and b. on the opposite side.
page 16
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 12
Connect the
heart rate
cables.
1
Display console
Left handrail
Heart rate cable
connections (male
connector, female
receptacle and
vice versa for the
opposite cable)
2
Security clip
13. Connect the heart rate cables. Diagram 12. Cables protrude from the ends of
both handrails and connect the metal strips on the handrails to the receiver
inside the display.Once the cables are properly connected, a user’s heart rate
appears when the user grasps both touch-sensitive grips.
Important: Attach one cable at a time.The cable receptacles mirror the con-
nectors so that they cannot be improperly installed. Do not force a connection!
Take time to look for the appropriate cable receptacle. Perform the following
steps, one cable connection at a time.
a. Slide the end of the cable into its receptacle. Diagram 12, #1.
b. Place the excess cable inside the display opening. Diagram 12, #2.
c. Move to the opposite handrail and complete steps a and b.
Diagram 13
Test the heart
rate feature.
Heart rate
grips
Display
console
Heart rate
blinking
Hr
indicator
IME
NCE
RIES
LINE
PROFILE
CALORIES
METS
/
MINUTE
SPEED
14. Test the heart rate feature. Diagram 13.
a. Turn the unit ON.The Precor banner should appear in the display.
b. Face the display and straddle the running belt.
page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
c. Place your left hand on the left handrail’s heart rate grip and place your
right hand on the right handrail grip.The letters “Hr” begin to blink in the
upper right display indicating that a signal is being transmitted. Within
about 15 seconds a heart rate appears.
Note: If the blinking “Hr” does not appear, turn the unit OFF. Recheck the
cable connections and ask someone else to try the test (steps a through c).
d. When the test is satisfactorily completed, turn OFF the treadmill and
continue with the assembly.
Install handrail
Diagram 14
clamp fasteners.
Hand held heart
rate grip
Lower handrail clamp
Replace the four fasteners removed in
step 11.
Washer (F)
1¼-inch screw (E)
15. Replace the lower handrail clamp. Diagram 14. Replace the lower
handrail clamp and the four fasteners removed in step 11.Make sure the top
of the handrail is aligned with the top portion of the clamp. Turn all four
fasteners until they are finger tight.
16. Secure the handrails. Diagram 14.Place a large washer (F) onto each of two
screws (E). Thread the screws through the lower handrail clamp and finger
tighten.
page 18
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 15
Secure the
fasteners.
Second:
Alternately
tighten four side
upright screws.
2
First: Alternately
tighten four front
panel screws.
3
Third: Alternately
tighten the four
screws that
secure the
console to the
uprights.
1
17. Tighten all mounting screws with the hex key (H) provided. Diagram 15.
Start at the front of the treadmill with the four screws that attach the upright
supports to the front panel. See Diagram 15, #1. Tightening these screws first
helps pull the rest of the treadmill’s parts into alignment. Second, proceed with
tightening the four screws (A) that secure the upright supports. See Diagram 15,
#2.Third, tighten the four console assembly screws (C). See Diagram 3, #3.
Important: For proper alignment, it is critical that the fasteners are
tightened in the order shown in Diagrams 15 and 16.
Diagram 16
Tighten the
handrail
fasteners.
2
1
First: Tighten
the handrail
clamp screws.
Second:
Tighten the
side bracket
screws.
3
Third: Tighten
the lower
handrail
screws.
18. Tighten all the handrail mounting screws. Diagram 16.So that you don’t
overtighten the fasteners, hold the supplied hex key by its 3-inch section
and tighten all six handrail clamp screws.See Diagram 16, #1.Next, tighten
the two side bracket screws. Because of inaccessibility, hold the 10-inch
section of the hex key to tighten the four lower handrail screws.
page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 17
Level
the
unit.
1
2
19. Lower the treadmill incline. Make the treadmill’s running bed level by
returning the incline to zero.To do this, you need to take the following steps:
a. Turn the unit ON.
b. Stand to the side of the unit and press QUICKSTART. After a few
seconds, the running belt begins moving.
c. When the lift stops moving, press the red STOP button and turn the power
switch OFF.
20. Level the unit. Diagram 17. The C936i has adjustable rear feet. Check to
make sure that the running surface is level (use a bubble level as shown in
Diagram 17). If the treadmill is placed on a slightly, uneven surface, adjusting
the rear feet can help, but will not compensate for extremely uneven surfaces.
Important: If you need to make adjustments, adjust one rear foot at a time.
Do not use the rear foot to raise or lower the unit more than ¾-inches.
Check the level of the unit after each adjustment.
page 20
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Adjust the
rear deck.
Diagram 18
21. Adjust the rear deck. Diagram 18.To raise the rear deck, insert the ¼-inch
hex key (H). Make sure that the key is fully engaged and turn it clockwise.
Turning the hex key counterclockwise lowers the unit.
22. Plug the power cord into an appropriate power outlet. Refer to Grounding
Instructions on page 3. Make sure that the ON/OFF (I/O) power switch,
located on the front panel of the treadmill, is placed in the OFF (O) position
before connecting to a power source.
CAUTION: The treadmill requires a dedicated, grounded circuit.
A 20 amp dedicated circuit is recommended. Make sure that no other
product or machine uses the same circuit as the treadmill.
TURNING THE UNIT ON AND OFF
Use the ON/OFF (I/O) power switch to turn the unit ON and OFF. This switch is
located on the front of the unit, near the power cord.
To complete the installation of the treadmill, continue with Checking the Alignment
of the Running Belt.
page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
CHECKING THE ALIGNMENT OF THE RUNNING BELT
The belt is aligned at the factory before shipment.However, during shipment or by
using the treadmill on an uneven surface, the belt might move off center. Proper
belt alignment is important because it allows the belt to remain centered and
assures smooth operation.
Follow these steps to check the alignment:
1. The treadmill has adjustable rear feet. Check to make sure that the running
surface is level (refer to steps 19 and 20 on page 20).
2. Locate the I/O switch at the front of the treadmill and turn the unit ON.
3. Stand beside the treadmill and press QUICKSTART.The running belt starts
automatically after the message, “Belt Starting 3, 2, 1,...” appears.
4. Continue standing next to the treadmill and hold down the Speed ▲ key
until the display shows a speed of 3 miles per hour (5 kph).
5. Walk around to the rear of the unit and observe the belt for a few minutes as
it moves.
If the running belt,...
Then,...
tracks centered on the
running surface
the belt is functioning correctly. It is
evenly distributed between the side rails
so no adjustment is necessary.
runs or drifts off center
you need to adjust the belt; see
Aligning the Running Belt, page 47.
Important: If you notice that the belt needs alignment, make the adjust-
ments at once. Failure to do so might cause the belt to tear or fray which is
not covered by the Precor Limited Warranty.
6. To stop the running belt, press the red STOP button.
If the belt is functioning correctly, the treadmill is ready to use. Please continue
on to Club Information to learn how to customize the treadmill for your Club.
page 22
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Club Information
These next few pages provide information that lets you customize the treadmill for
your Club. It is not information that your customer needs or, necessarily, should
see.This section covers the following information about how to:
•
•
•
•
select the unit of measure: U.S. standard or Metric
set maximum speed, workout, and pause times
display the odometer and other useful information
connect to CSAFE compatible devices
Note: If your customers are interested in the learning more about the C936i treadmill,
you may wish to direct them to the manual available on Precor’s web site
information found in this section.)
Diagram 19 Display console keypad.
Gently, press and hold
the ▼ or ▲ key to view
the available selections.
CHANGING THE CLUB SETTINGS
The Club “custom” settings are accessed through specific codes that help eliminate
unauthorized access. Refer to Diagram 19 to locate the keys. Information that you
can access and features that can be customized are as follows:
•
•
Units of Measure — Select between U.S. Standard and Metric displays.
Maximum Speed — Determines the maximum speed that a user can select.
Selections range between 0.5 to 11 mph (1 - 18 kph).
•
MaximumWorkoutTime — Sets a maximum limit on workout time.
Note: Remember that the user will get an additional five-minute cool down
period appended to a completed program. So, adjust the maximum time limit
accordingly.
•
•
Maximum Pause Time — Sets the maximum duration in which a person
can “pause” his or her workout.
Odometer, Hours of Use, SoftwareVersion, and Error Log —The treadmill
stores the cumulative miles or kilometers, the number of hours that the unit has
been in use, the software version and software type (which is valuable when
calling Customer Support), and an error log (useful when troubleshooting).
page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
To access the Club settings, the following must occur:
❑
❑
❑
Check to be sure that the treadmill is turned ON.
Check that the Precor banner appears on the display.
Press the appropriate key sequences.(To cancel entries, press RESET.)
The display console keys that you need to press to select the units of measure or
set the maximum speed, workout, and pause times are as follows:
Stop, QUICKSTART, ENTER, QUICKSTART, INCLINE ▲, QUICKSTART,
ENTER, QUICKSTART
Note:To initiate the Club Custom mode, you need to press QUICKSTART within
1/3 second after pressing the Stop button. (The RESET key may be used in place
of the Stop button.)
Important: To access Club Custom mode, press Stop while the Precor banner is
displayed.Within ¹⁄₃ second, begin pressing the key sequences.If the system does not
detect a key press (within ¹⁄₃ second) after Stop, it resets to the Precor banner.When
you begin entering a key sequence, each key must be pressed within four seconds of
the other or the Precor banner reappears and you have to begin again.
Display key functions within the Club Custom Mode
SELECT reminds you what part of
the program you’re changing.
▼▲ lets you scroll through the
various selections that appear.
The longer the key is held down,
the faster the numbers scroll past.
RESET
exits Club Custom mode and
displays the Precor banner.
ENTER
saves the information being
displayed and moves to the
next aspect of the program.
Stop advances to the next aspect of
the program without storing the
information that appears on the
display.
DETERMINING THE UNITS OF MEASURE
Two different units of measure can be selected, Metric or U.S. standard. Make your
selection using the ▼▲ keys. Press ENTER once the correct unit is displayed.
Note: Anytime you wish to exit the Club Custom mode, press the RESET key.
The display attributes that you selected by pressing ENTER are saved and
recorded in memory.
CAUTION: If you change the Unit of Measure display, be sure to check the
“Set Max Speed” setting to verify that it is correct. Refer to Determining
the Club Speed Limit.
page 24
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
DETERMINING THE CLUB SPEED LIMIT
You can set the maximum speed for the treadmill.This limits how fast the running
belt moves and, consequently, how many adjustments a user can make to the
treadmill’s speed. The speed is displayed in miles per hour (mph) or kilometers
per hour (kph) depending upon the units of measure (Metric or U.S.standard) that
are selected.
The ▼▲ keys let you choose a speed between:
0.5 to 11.0 mph
1 to 18 kph
Important: If you select a number that limits the miles per hour, your change will
not affect the kilometers per hour (and vice versa). The treadmill does not convert
the speed entered in miles per hour (U.S. standard) to kilometers per hour (Metric).
It stores separate numbers for the different units of measure.
SETTING A WORKOUT TIME LIMIT
You can limit how long a user works out by setting a duration between 1 and 240
minutes.The treadmill also lets you choose “INFINITE” (found at the zero point be-
tween 240 and 1) which allows the user to select a program and work out indefinitely.
Note: The QuickStart program is automatically limited to the Club limit.
However, if a user presses QUICKSTART at the Precor banner, and the Club
program has limited workout time to less than 30 minutes, then that duration
takes effect.For example, if you set the workout time limit to 20 minutes, the tread-
mill allows users to specify a workout between 1 and 20 minutes. Users cannot
specify a time longer than 20 minutes.
Important: Exceptions to the rule above include the Cross Country program (set
at 30 minutes) and the Weight Loss program (set at 28 minutes).
Use the ▼▲ keys to select a workout time limit. Touch either ▼▲ key and the
display changes in one minute increments. Press and hold the ▼ or ▲ key and
the numbers advance or decrease faster.Take into account that the user may get
an additional five-minute cool down period appended to his or her workout
(depending on program selection), so adjust the maximum time limit accordingly.
Note:If the workout time is set to INFINITE, users can workout indefinitely, so no
cool-down period is appended to the program selection.
SETTING A PAUSE TIME LIMIT
Setting a Pause time limit is useful because the treadmill returns to the Precor
banner at a selected interval after the Stop key is pressed whether the user
planned to return or not.
Use the ▼▲ keys to set a Pause time limit between 1 and 120 seconds (two minutes).
page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
VIEWING THE ODOMETER, HOURS OF USE, SOFTWARE
VERSION, ERROR LOG AND SERIAL NUMBER
While the Precor banner is being displayed, press:
Stop, ENTER, QUICKSTART
Note:You need to press ENTER within ¹⁄₃ second after pressing the Stop button to
initiate the Club Custom mode. (The RESET key may be used in place of the
Stop button.)
The field name Odometer appears briefly and then the odometer value (the cumula-
tive miles or kilometers users have travelled) appears. When either Select key is
pressed the word “MILES” (or “KILOMETERS”) appears on the display to let you
know the unit of measure.When the key is released, the odometer value reappears.
Press ENTER and the number of hours (Hour Meter) that the unit has been in
use appears.The C936i notes the passing of minutes, but the numeric value that
appears is truncated to the nearest full hour.When either SELECT key is pressed
the word “HOURS appears on the display. When the key is released, the hour
meter reappears.
Press ENTER and the unit’s three digit SW Version (upper display software
version number) appears. Press either SELECT key to view the lower board’s
software version number. The SELECT key toggles between the two versions.
The words “UPPER” and “LOWER” appear prior to the version being displayed.
Press ENTER or the red STOP button and the Error Log appears.Press any ▼ or
▲ key to scroll through the error codes. Up to ten error codes can be recorded
and retrieved.
To view the odometer reading at the time the error was detected and the hours of use
at the time the error occurred, press either SELECT key while the error code is being
displayed. The SELECT keys act as toggles between the associated information.
Note: To clear (delete) the error log, press QUICKSTART for at least four
seconds while viewing the list. Prompts appear on the display and let you know
when the error messages have been deleted (“cleared” from memory).
Important:You cannot retrieve the error log once you have deleted it.
To view the serial number, press ENTER. Write the serial number onto the
warranty registration form on page 50 and in the space provided on page 7.The
serial number is helpful should you ever need to contact Customer Support.
To return to the Precor banner, press RESET, ENTER or the red STOP button.
page 26
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
USING CSAFE STANDARD EQUIPMENT
The C936i is fully compatible with CSAFE protocols. If the unit is connected to a
CSAFE master device, the user will be prompted to enter a user ID. Five zeros
appear on the display.The left zero blinks to indicate that it is awaiting input.The
following table provides information about the keypad functions:
User ID Entry:
INCLINE ▼ or ▲
SPEED ▲ or ▼
ENTER
Program Keys
moves the blinking LED from field to field.
changes the number value in the selected field.
submits the displayed user ID. Note that if the 5 zeros are
being displayed when the user presses ENTER, user ID.
entry is bypassed and the program prompt appears.
RESET
resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master
device.Then, the program prompt is displayed. See Quick Steps to Working Out
on page 37.
To review information about CSAFE specifications, visit the web site at:
Additional CSAFE commands supported by the C936i software include:
SetProgram, SerUserInformation, GetUserInformation, GetOdometer, and
GetErrorCode
page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
The C936i Display
The C936i is designed so users can work out with minimal instruction or training.
The directions on the console and the prompts on the display will guide a user
through the entire workout session. Before the treadmill is used, however, we
recommend that you, as club owner or manager, familiarize yourself with it so you
can instruct your customers to use it safely and effectively.
This section covers the following information:
•
•
•
an overview of the features provided on the display console
an explanation about the available programs
instructions for utilizing the heart rate options
FEATURES ON THE DISPLAY CONSOLE
As a user works out, indicator lights appear next to the feature being displayed.
When a user begins a program, the display initially presents TIME and PROFILE.
The user can change what features appear by pressing the SELECT keys. Refer to
Changing the Display Features Using the SELECT Key on page 35.
Diagram 20 C936i Display Console
Heart Rate display
If a heart rate is
detected, it is
displayed in this
window.
SmartRate® bar graph.
Banner, program profile
and workout statistics
display.
TIME
DISTANCE
CALORIES
INCLINE
PROFILE
CALORIES
METS
/
MINUTE
SPEED
SELECT keys
Customize the display
by highlighting an LED
indicator in each column.
Make your selections by pressing the
appropriate SELECT key. A lit LED indicates
which feature is being displayed.
Touch-sensitive keys (used to
input or select data and
control the workout session).
During a workout, the display console provides motivation by presenting constant
feedback about a user’s progress. A brief explanation of each feature on the
display console appears in Diagram 20. Look on the next pages for a more
thorough explanation.
Note: If an error message appears, call a Precor qualified service technician or
service center. Refer to Obtaining Service on page 7.
page 28
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
SMARTRATE® DISPLAY
A user must enter an AGE (during the program Setup prompts) and wear a
chest strap, while in a program, before the blinking segment in the bar graph can
show the zone that his or her heart rate is in, either:Weight Loss or Cardiovascular.
Weight Loss Zone:Maintaining the heart rate between 55% and 70% of the
user’s maximum aerobic heart rate, helps burn enough calories that, when
continued on a regular basis for 30 minutes or more, provides the greatest
fat-burning results.
Cardiovascular Zone:Maintaining the heart rate between 70% and 85% of
the user’s maximum aerobic heart rate, helps (when continued on a regular
basis for 30 minutes or more) improve the user’s overall cardiovascular/
cardiorespiratory fitness level.
Important:During a program, a user’s heart rate must be above 40 beats per
minute before the segment begins to blink.Note that pressing QUICKSTART,
at the Precor banner display, disables the SmartRate® display feature.
HEART RATE: The heart rate display lets the user monitor their heart rate.
When a heart beat is detected, the number appears in the small upper right
display (refer to Diagram 20).If the user does not grasp the grips on the handrail
or wear the optional chest strap, a heart rate will not be detected and no pulse
rate appears.
SETUP MODE AND PROMPTS
From the Precor banner, a user accesses the Setup mode which lets him or her
“set” the program, workout time, weight, and age parameters prior to working out.
The Precor banner is the “starting point” to begin a workout. It indicates that the
C936i is ready to accept user entries.If the banner does not appear on the display,
press the RESET key. If the display appears blank, make sure that the treadmill is
turned ON.
Note: Key presses to the INCLINE ▼▲ or SPEED ▼▲ keys are ignored when
the banner is being displayed. Refer to page 33 for more information about the
keypad.
PROGRAM:The abbreviated program name and profile appears on the display.
The ▼ and ▲ keys allow the user to scroll through the available programs. The
left portion of the display presents the abbreviated name of the program, while
the right half displays the program profile. The text blinks indicating that it is
awaiting approval.To choose the selection being displayed and continue in Setup
mode, press Enter. (Refer to The Setup Mode and the QuickStart Feature on
page 30.)
Note: Depending on the program that is selected, the user may be prompted for
other information. Refer to Programs on page 41.
page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
TIME: Acceptable entries range between INFINITE and 240 minutes. (See “Note”
below.)The display blinks to indicate that it is awaiting a selection.Use the ▼ and
▲ keys to change the selection.To continue in Setup mode, press ENTER.
Note: The Club manager has the ability to set a time limit on the length of a
workout. Refer to Club Information on page 23. (The Weight Loss and Cross
Country programs have a preset time limit so a WORKOUT TIME prompt does
not occur when a user chooses WTLS or XCTR.)
WEIGHT: Acceptable entries range from 1 through 999 (pounds or kilograms). A
user can change the blinking number using the ▼ and ▲ keys or accept the
displayed number (and continue in Setup mode) by pressing ENTER.
Important:A number that reflects the user’s actual weight must be entered since
the calorie count and several other calculations are based on the weight entry.
AGE: Acceptable entries range from 1 to 99. Change the blinking number using
the ▼ and ▲ keys or accept the displayed number by pressing ENTER. Initially,
the number zero appears on the display. Once the ▲ key is pressed the number
jumps to 35.
Important: An age entry is required if a user wants to use the heart rate interac-
tive capabilities of the treadmill. Refer to QUICKSTART on page 34.
THE SETUP MODE AND THE QUICKSTART FEATURE
The QuickStart feature can be pressed any time during the Setup prompts. See
the table below.
Note:Default values apply if QUICKSTART is pressed while the Precor banner is
displayed.Refer to QUICKSTART on page 34.
Press QUICKSTART at
the,...
The following occurs:
Precor banner
Bypass the remaining Setup prompts and the running belt
begins moving after a three second countdown. The Manual
program appears and default values apply.
Program prompt
The profile associated with the program appears on the right
side of the display.
The information that appears on the display becomes the work-
out time for the program. A user can change the display using
the ▼ or ▲ keys. Refer to Club Information on page 23.
TIME prompt
The weight (1 through 999) that appears on the display
becomes the user’s designated weight that the C936i uses to
compute various calculations.
WEIGHT prompt
page 30
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Press QUICKSTART at
the,...
The following occurs:
AGE prompt
The age (1 through 99) that appears on the display becomes
the designated age that the C936i uses for SmartRate®. A
correct age entry between 1 and 99 is very important if the
user plans to utilize the heart rate characteristics of the
treadmill. The QUICKSTART key acts the same as the
ENTER key at this point because all the Setup prompts have
been answered.
DISPLAY FEATURES DURING A WORKOUT
Note: The Setup prompts that appear in this display prior to a workout need to be
addressed using the keypad keys. Refer to Setup Mode and Prompts on page 29.
During workouts, the program profile that appears in the display corresponds
to the selected program.The blinking column in the program profile indicates the
incline level and user’s progress along the program.
Once the running belt begins moving, indicator lights appear in the columns
below the display and indicate which information is being displayed. A user can
highlight a particular feature by pressing the appropriate SELECT key.
The following describes the information that can appear in the display.
TIME:As a user works out, TIME indicates the amount of time spent in his or her
work out. The time (00:00) display appears when the workout begins. Time
appears in minutes and seconds. However, should a user exceed 60 minutes
(during a single workout), the Time display converts to hours and minutes. When
QUICKSTART is pressed at the banner or INFINITE is available and is selected
during the Setup prompts, the Time display shows how long a user has been
working out. However, in warm-up and cool-down periods, and in all other
programs, theTime display indicates the minutes remaining.
Important: A user’s “pace” (time per mile or kilometer) can also be displayed in
the TIME field. Refer to the SPEED keys on page 34.
DISTANCE:The distance travelled appears (0.00) once a user begins a program.
The distance can appear in miles or kilometers. Note that if the distance exceeds
65 miles (km) in a single workout, the display resets to zero. To change which
units of measure appear on the display, the club owner or manager can follow the
instructions found in Club Information on page 23.
page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
CALORIES: Provides the cumulative number of calories being burned by the user.
INCLINE: Displays the selected percent of incline during a workout.The INCLINE ▲
and ▼ keys affect the treadmill’s lift and let the user set an incline between 0 percent
and 15 percent. The displayed values change in 0.5 percent increments. Refer to
INCLINE ▲▼ keys on page 33.
When the INCLINE field is selected and the target incline changes, the target
incline continues to be displayed as the lift moves to the new incline level. A few
seconds after the lift reaches the requested incline, the display no longer appears.
Note: To check the incline (when it is not the chosen display) any time during a
workout, lightly press either INCLINE ▲ or ▼ key for less than two seconds. If a
user presses the INCLINE ▲ or ▼ key for more than two seconds, the treadmill’s
incline will change.
PROFILE: At the beginning of a program, the profile appears on the right side of
the display and corresponds to the program that the user selected. As the user
proceeds through his or her workout, the position in the program is indicated by a
blinking column. The height of the column indicates the level of incline. Every
time the incline changes by several sequential levels (up or down) the height of
the column changes by one cell.
CALORIES PER MINUTE: Indicates the approximate number of calories being
burned per minute.
METS: Displays the metabolic equivalents associated with a user’s current energy
expenditure level. A METS level of 1 represents the body at rest. Note that when
the running belt stops moving, the METS value displays zero.
SPEED: Displays the running belt’s speed.The running belt speed ranges from
0.5 to 11 mph (1 to 18 kph), but a maximum speed can be set by the club (see
Club Information on page 23). The SPEED ▼▲ keys let a user decrease or
increase the running belt’s speed in 0.1 increments.
Important: To check the speed (when it is not the chosen display) any time
during a workout, the user can lightly press either SPEED ▼ or ▲ key (for less
than two seconds). The running belt’s speed appears in the right portion of the
display. If a user presses the SPEED ▼ or ▲ key for more than two seconds, the
treadmill’s speed will change.
PACE: Displays the user’s target speed in minutes and seconds per mile
(or kilometer).The user’s pace appears in the TIME field when the SPEED indicator
is not lit and the user taps the SPEED ▼ or ▲ key.
page 32
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 21
Display console keypad.
QUICKSTART: When pressed at the
Precor banner, the running belt begins
moving after a three second delay.
SmartRate® is inactive and default values
apply.
Keypad keys
The keypad keys let the user:
• control your workout session,
• answer prompts prior to starting a
program,
• determine which display features appear,
• prematurely end a program, and
• adjust the incline and speed levels.
KEYS ON THE DISPLAY CONSOLE
The following information explains the different uses of the keys on the keypad.
To locate each key, look at the display console or refer to Diagram 21.
INCLINE ▲▼: During a workout, the INCLINE ▲▼ keys let the user increase or
decrease the incline in 0.5 percent increments.The display can show a range from
0 percent to 15 percent.
When a user changes the incline by pressing the INCLINE ▲ or ▼ key, the number
that appears on the display shows the target incline (not necessarily, the present
incline) because the display can change much faster than the treadmill’s lift.
Note: Anytime during a workout, the user can view the actual incline by lightly
touching either INCLINE ▲ or ▼ key.The percent of incline appears on the left of
the display.To change the incline, the user must hold the key down for more than
two seconds.
During Setup mode, the INCLINE ▲▼ keys are used for data selection. Pressing
either ▲ or ▼ key does not affect the incline. However the ▲ or ▼ keys do affect
what appears on the display. Refer to Setup Mode and Prompts on page 29.
SELECT keys: During a program, the SELECT keys change what items appear
on the display. Refer to Changing the Display Features Using the Select Key on
page 35.
RESET: Provides access to diagnostics (see Club Information on page 23) and
lets the user access the WORKOUT SUMMARY display while in Pause mode. If
the user presses RESET again, he or she exits the WORKOUT SUMMARY and
returns to the Precor banner. Note that if the user presses RESET during the
Setup mode, he or she returns to the Precor banner.
page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
QUICKSTART: This key lets the user bypass the Setup prompts and start
working out immediately using the Manual program.Default values apply.
QUICKSTART DefaultValues
Prompts DefaultValue
PROGRAM Manual
TIME
Club dependent (usually 30 minutes - see page 25.)
150 lbs. (68 kg.)
WEIGHT
AGE
0 : A valid AGE must be entered to utilize the SmartRate®
display. If QUICKSTART is pressed after an AGE is entered,
then the SmartRate display will appear when a user wears the
chest strap or grasps the touch-sensitive handrail grips. If no
AGE entry occurs, then SmartRateLED’s light, but are not acti-
vated. Note that the chest strap is available through a Precor
dealer.Refer to Obtaining Service on page 7.
The QUICKSTART key can be pressed any time during the Setup prompts.
For more information, refer to page 30, The Setup Mode and the QuickStart
Feature.
ENTER:Workout specific prompts which appear on the display need to be addressed
and then “entered” into the unit's memory by pressing the ENTER key. Refer to
Quick Steps to Working Out on page 37.
SPEED ▼▲: During a workout, the SPEED keys let the user decrease or increase
the running belt’s speed. The display can show a range from 0.5 to 11 miles per
hour (1 to 18 kilometers per hour) and changes can be made in 0.1 increments
from 1 to 11 mph (1 to 18 kph). The display indicates a speed of “0” when a user
presses the SPEED ▼ key to stop the running belt.
Any time during a workout, the user can view the actual speed by lightly tapping
either SPEED ▼ or ▲ key. His or her “pace” (minutes per mile or kilometer)
appears in the left-most portion of the display. To change the speed, a user can
hold the key down for more than two seconds.
During Setup mode, the SPEED ▼▲ keys are used for data selection. Pressing
either ▼ or ▲ key changes what appears on the display, but does not affect the
speed of the running belt. Refer to Setup Mode and Prompts on page 29.
page 34
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
CHANGING THE DISPLAY FEATURES USING THE SELECT KEY
The SELECT keys let the user choose which features appear on the display.
When a user enters a program, theTIME and PROFILE features are preselected.
Each SELECT key affects four different display features. The left SELECT key,
causes the indicator light to appear next to TIME, DISTANCE, CALORIES, and
INCLINE. The right SELECT key, highlights PROFILE, CALORIES/MINUTE,
METS, and SPEED.
A user determines which features appear by pressing the SELECT keys to switch
the indicator lights, next to the item, on or off. If the indicator light is off, the item
will not appear in the display.
page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Exercising on the Treadmill
Once the C936i is set up, it is ready to use.There are no complex instructions to
follow or mandatory programming steps required to operate the treadmill. The
easy-to-understand prompts let the user select a program and specify how long
he or she wishes to work out. The speed and incline levels can be adapted to
meet fitness goals.
Important: Club owners, managers, personal trainers. Remind users how
important it is to use the treadmill’s safety features and security clip while working
out on the treadmill. Instruct them on how to attach it to their clothing near their
waistline.If any complications occur, a strong tug on the security cord or a quick tap
on the red STOP button will stop the running belt.
Note: This section of the manual is written for the user because it specifically
explains how to work out on the treadmill.References are made in second person.
Information presented in this section includes:
• Using the safety features
• Quick steps to working out
• Reviewing keypad and workout tips • Coolingdown, pause and exiting features
CAUTION: Do not allow children on or near the treadmill. If anything should
get caught in the rollers, the running belt does not stop immediately.
USING THE SECURITY CLIP
AsecurityclipisattachedbyitscordtotheredSTOPbuttonthatstraddlesthehandrail. Always
attach the security clip to your clothing before each workout. A tug on
the cord trips the security switch and slows the running belt to a stop. If the security
switch trips while you are working out, the treadmill retains your workout statistics
and enters Pause mode. To resume your workout, reattach the security clip to your
clothing, and press the SPEED ▲ key until you reach the desired speed.
Important: Club owners, managers, personal trainers. Remind users how
important it is to use the security clip while working out on the treadmill. Instruct
them on how to attach it to their clothing near their waistline.If any complications
occur, a strong tug on the security cord will stop the running belt.
USING THE HANDRAILS
Always grasp the handrails to keep your balance when stepping on to or off of
the treadmill. Hold onto one handrail when touching the keypad with the other.
USING THE HEART RATE “TOUCH” CAPABILITY
If a user wishes to view his or her heart rate on the display, instruct them to
grasp the touch-sensitive strips (called “grips”) on the handrails while working
out. A heart rate signal is transmitted to the receiver installed in the display
console. During a workout, the heart rate indicator displays the heart rate.This
lets the user see what his or her heart rate is doing even when the display is
presenting other workout statistics.
page 36
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
KEYPAD TIPS
Important:The keys on the keypad are touch-sensitive. A light “touch” is all that
is required to activate the key function. Key presses to the ▼ or ▲ key are
ignored when the Precor banner is being displayed.
RESET — exits the Setup Mode or accesses the Workout Summary while in
Pause mode.
QUICKSTART — bypasses further selections and starts the running belt. Default
values apply (see QUICKSTART on page 34). SmartRate® is not active.
ENTER — initiates the Setup mode and allows you to enter display selections.
WORKOUT TIPS
•
Always attach the security clip to your clothing prior to working out.
•
Answer Setup prompts by pressing the ▼ or ▲ keys. (Incline and speed
levels are not affected until the program begins.)
•
•
Press ENTER to select the information being displayed.
Accurate entries are required or features, such as SmartRate®, will not work
properly.
•
•
A time-out occurs during the Setup prompts if the C936i detects no key
presses for two minutes. The display returns to the Precor banner.
Anytime during setup process, press RESET to return to the Precor banner.
QUICK STEPS TO WORKING OUT
The steps to working out on the C936i are listed below. A short explanation
appears on the left with the more thorough description following on the right.
CAUTION: Before beginning any fitness program, obtain a complete physical
examination from your physician.
1
2
Put on the chest strap.
(Available with the Precor
Heart Rate Option.)
1. For your heart rate to appear on the display, you need
to wear a chest strap or hold on to both touch-
sensitive grips on the handrail.
2. Straddle the running belt with your feet firmly planted on the
right and left staging platforms. (Stand close enough to the
display console so that you can extend your arms to easily
touch the keys.)
Straddle belt.
3
3. Attach the security clip to your clothing near your waistline
where it will not interfere with your workout.
Attach security clip
to clothing.
CAUTION: Hold onto the handrails if you press the
QUICKSTART key.The running belt starts automatically.
page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
4
Select a program.
4. To display the program selections, press ENTER and then,
press any ▼ or ▲ key.
Note:You can begin your workout immediately from the Precor
banner by pressing QUICKSTART. Default values
apply. Refer to page 34.
5
Begin working out.
Enter the program
selection, answer
prompts, and enter your
Weight and Age.
5. If you choose to continue the setup process, you are prompted
to enter your WEIGHT and AGE. Follow the instructions on
the display. When prompted, press SPEED ▲ with the one
hand while you hold onto the handrail with the other. Step
onto the running belt while the speed is at 1 mph (2 kph).
Once you are comfortable with the walking or running speed,
you can remove your hand(s) from the handrail.
To pause during your workout session before finishing the
selected program, press the Stop key. See Pause, Workout
Summary and Exit Features for more information.
(Pause)
6. When you have completed a program, a five-minute cool-
down period automatically begins. Hold onto the handrail.
6
7
Continue your
workout.
Note: Always incorporate a cool-down period into your
workout.See Cooling Down AfterYourWorkout.
(Cool down)
7. After you complete the five-minute cool-down period, the
running belt comes to a complete stop and a WORKOUT
SUMMARY banner appears.Workout statistics exceptTIME,
DISTANCE and CALORIES reset to zero. (Note that the
TIME display shows the accumulated workout time including
warm-up and cool-down periods.)You are given two minutes
to review your workout statistics before the display automati-
cally resets to the Precor banner. To return to the Precor
banner, prior to the two minute time-out, press RESET.
End your workout.
(Review WORKOUT
SUMMARY)
Remove the
security clip and
step off the treadmill.
8
8. Detach the security clip from your clothing and carefully
step down from the treadmill.
page 38
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
COOLING DOWN AFTER A WORKOUT
Cooling down is an important aspect of your workout because it helps reduce
muscle stiffness and soreness by transporting excess lactic acid out of the
working muscles.Cooling down for at least three minutes helps provide a smooth
transition that allows your heart rate to return to its normal (non-exercising)
state. The treadmill automatically initiates a five-minute cool-down period on
several of its programs. A prompt appears, indicating that you are in cool down.
During your cool down, the workout statistics continue to appear. The Time
display counts down so you know how much time remains. When you complete
the five-minute cool down, a WORKOUT SUMMARY banner appears. See the
information on page 40.The following information describes what happens when
you press certain keys while in the cool-down mode.
While in Cool
down, you press
This is what happens...,
red STOP button
Enters Pause mode.The running belt slows to a gradual
stop.TIME stops accruing.The display features remain,
so you can review your workout statistics. Note that the
Pause mode has a time limit and the club has the
option to change the setting. If you enter Pause mode
during your cool down, it is of limited duration.
While in Cool
down/Pause
mode, you press
This is what happens...,
SPEED ▲
Starts the running belt moving again and returns to the
cool-down period from where you left off.TIME continues
to count down.
RESET
Displays the workout summary banner. See the informa-
tion under Pause mode.
page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
PAUSE, WORKOUT SUMMARY, AND EXIT FEATURES
Pausing and exiting are integral parts of your workout and can be accessed any
time during a program.
Pause mode — can be accessed while in a program or during cool down. Note
that the Pause mode has a time limit and the club has the option to change the
setting. If you enter Pause mode during your cool down, it is of limited duration.
WORKOUT SUMMARY display — provides a two minute time frame in which you
can review your workout statistics before the display automatically resets to
the Precor banner.The WORKOUT SUMMARY banner can be accessed from the
Pause or Cool Down/Pause modes, or by prematurely exiting a program.When you
access the workout summary display, workout statistics except TIME, DISTANCE
and CALORIES reset to zero. (Note that the TIME and CALORIES displays
show the accumulated workout time and expended calories including warm-up and
cool-down periods.)
The following information shows what happens when you press certain keys
while in the various modes.
During a program,
you press
This is what happens...,
Stop
Enter Pause mode.The running belt slows to a gradual
stop. Note that you may also press the SPEED ▼ key
until the running belt stops. When the belt stops, TIME
stops accruing.The display features remain, so you can
review your workout statistics.
In Pause mode,
you press
This is what happens...,
SPEED ▲
Exits Pause mode and starts the running belt moving again
so that you can resume where you left off.
RESET
Displays the WORKOUT SUMMARY banner so that you
can view your workout statistics.
At the WORKOUT
SUMMARY banner,
you press
This is what happens...,
RESET
Resets the display to the Precor banner.
page 40
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Programs
The C936i lets the user choose between six programs. This section provides
information about the special features and functions of the treadmill’s programs
and how to best utilize the:
• SmartRate® feature
• Cross Country program
• Weight Loss program
• Heart Rate program
• Manual program
• Interval program
• Random program
Note: To choose a program (other than Manual), begin at the Precor banner
and press ENTER. User-friendly prompts guide the user through the program
selections. Refer to Quick Steps to Working Out on page 37.
THE HEART RATE FEATURE
To use the heart rate features you must wear the chest strap while working out
unless you are using the C936i with the touch-sensitive handrail grips.The chest
strap transmits your heart rate signal to the receiver installed in the display con-
sole.The signal appears as a number in the heart rate display.This lets you monitor
your heart rate even when the display is presenting other workout statistics.
USING THE SMARTRATE® FEATURE
Add the benefit of SmartRate® to every program on the treadmill.Using SmartRate®
as a visual cue helps a user adjust their exercise routine to suit specific needs.
SmartRate® simplifies the correlation between heart rate and exercise. A user
doesn’t have to stop concentrating on a workout to find a pulse. It is displayed
right in front of them along with the SmartRate® zone. Once a user begins a
workout, a blinking segment in the bar graph appears on the left of the display,
if a user entered an age during the Setup prompts. The segment blinks in time
with the user’s pulse and highlights the zone that their heart rate is in: Weight
Loss or Cardiovascular.
Important: Access to SmartRate® is only available when the person exercising
wears a chest strap or uses the touch-sensitive grips on the handrails. (The
chest strap is separate purchase option.)The SmartRate® indicator lights do not
appear when QUICKSTART is used to select a program.
For the ideal “weight loss” range, a user’s heart rate should be between 55% and
70% of his or her maximum aerobic heart rate. It should never exceed 85% of his
or her maximum aerobic heart rate or go above the user’s target zone. Refer to
Diagram 22 for the appropriate target zone.
page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Diagram 22
Target Zones.
200
190
180
170
160
150
140
130
120
110
100
90
80
70
20 25 30 35 40 45 50 55 60 65 70 75
When the user maintains his or her heart rate between 70% and 85% of the maxi-
mum aerobic heart rate, the user is improving his or her overall cardiovascular/
cardiorespiratory fitness level. Maintaining the heart rate in either zone (weight loss
or cardiovascular) for 30 minutes or more on a regular basis (minimum 3 times a
week) provides the greatest benefits.
MANUAL MODE AND THE QUICKSTART KEY
Manual mode lets the user control the incline and running belt speed which affects
the effort put into a workout. As with other programs, when a user completes the
time limit set for the program, the automatic cool-down period begins.
A user can choose Manual mode in two different ways:
•
•
pressing the QUICKSTART key at the Precor banner. QUICKSTART
bypasses the remaining selections and starts the Manual program. Default
values apply. Refer to pages 30 and 34.
pressing ENTER at the Precor banner. This causes the C936i to display
several Setup prompts. At the program prompt, a user selects the MANL
program.
The Manual program profile appears as a flat line. Use the ▼▲ keys to adjust the
incline or speed. (See pages 33 and 34 for more information on key function.) As
the user proceeds with his or her workout, a blinking segment represents his or
her position on the program.
page 42
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
CROSS COUNTRY PROGRAM
The Cross Country program has predetermined incline settings and a time limit
of 30-minutes. A user can make changes to the running belt speed using the
SPEED ▼▲ keys throughout the program.The preset incline can be overridden
using the INCLINE ▲▼ keys, but the incline reverts to the original settings when
you complete the program.
INTERVAL PROGRAM
The interval program on the C936i lets the user select the rest and work intervals
according to his or her training regimen. Each rest interval is followed by one
work interval.The user sets the incline and speed for first rest and work interval
and the software repeats the intervals throughout the program. At any point during
the workout, the user can change the settings of the current interval by simply
pressing the ▼▲ keys.The software remembers the new settings and applies it
to the appropriate rest or work interval from that point forward.
Important: If a user entered his or her age during the Setup prompts and wears
the chest strap or grasps both heart rate grips on the handrails, the user can
adjust the rest or work intervals to keep his or her heart rate in its recommended
zone. For the weight loss mode, try to maintain a heart rate at the lower end
(55% of maximum heart rate) while in the “rest” intervals and keep it at 70% of
maximum heart rate while in the “work” intervals. See Diagram 22 on page 42.
To use the interval program, take the following steps:
1. Follow the instructions on page 37, Quick Steps to Working Out.
2. At the program prompt, use the ▼▲ key to select INTV.
3. Press ENTER to proceed to the next prompt.When a user finishes answer-
ing the Setup prompts, the Interval program begins.
To set the incline and speed levels for each interval, have the user take the
following steps:
1. To program the rest interval, press the INCLINE ▼▲ keys and SPEED ▼▲
keys to change the corresponding levels. When the desired settings are
displayed, simply continue working out—the user does not need to press
ENTER.
The C936i returns to the “rest” settings at the beginning of each rest interval
until the user readjusts it or end his or her workout.
2. The same procedure applies to specify the settings for the work interval.
The value that appears in the SEGMENTTIME field indicates the time remaining
in the current interval. Each time the C936i changes intervals, it informs the user
by displaying a message. When a user completes the time limit set for the
program, the automatic cool-down period begins.
page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
WEIGHT LOSS PROGRAM
The PrecorWeight Loss program incorporates the latest findings on fat-burning and
weight loss through exercise. It is based on research at the world-renowned
Cooper Institute for Aerobics Research and it is designed to help the user burn the
most fat during a 28-minute workout, while minimizing the risk of discomfort and
injury. The Weight Loss program is similar to the Interval program. The C936i
automatically adjusts the incline of the treadmill while in the rest or work intervals.
Note: For the C936i to detect a heart rate, the user must wear the chest strap.
The chest strap is optional equipment that can be purchased from a dealer.
To use the Weight Loss program, follow the steps found in Quick Steps to
Working Out on page 37.When the PROGRAM prompt appears, chooseWTLS.
Important: During a workout, the user can change the incline, but doing so will
cause the effectiveness of the Weight Loss program to vary.
Note:When the user completes the time limit set for the program, the automatic
cool-down period begins.
RANDOM PROGRAM
The C936i Random program incline is predetermined, but the profile changes
every time you access the program. A user can make changes to the running belt
speed using the SPEED ▼▲ keys. The preset incline can be overridden using
the INCLINE ▲▼ keys, but certain rules apply:
✓
✓
a “0” percent incline exists for the first segment (column).
the maximum range that the incline can be changed between columns is
fixed at plus or minus 4 percent.
page 44
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
HEART RATE PROGRAM
Once the user sets a target heart rate and the running belt’s speed, the C936i
Heart Rate Program monitors the user’s heart rate and automatically maintains it
within a few beats per minute (bpm) of the selected target. Blinking lights on the
SmartRate® bar graph appear to show the “zone” that the user is in.
Note: For the C936i to detect a heart rate, the user must wear the chest strap or
hold onto both touch-sensitive grips on the handrails.The chest strap is optional
equipment that can be purchased from your dealer.
To use the Heart Rate Program, have the user follow the steps found in Quick
Steps toWorking Out on page 37 and choose HRC at the PROGRAM prompt.For
the Heart Rate Program to operate properly, a user’s AGE must be entered during
the Setup prompts. Once the user addresses the remaining Setup prompts, the
following occurs:
•
•
•
The software verifies that it detects a heart rate signal.You need to press the
SPEED ▲ key to begin working out.
Note: If a user’s heart rate cannot be detected (or transmitted through the
chest strap or touch-sensitive grips), the letters “Hr” blink in the heart rate
display. Once a heart rate is detected the number that corresponds to the
user’s heart rate appears.
The treadmill provides a three-minute warm-up period before entering
the Heart Rate Program. During this time, the user may make changes to
the incline by using the INCLINE ▲▼ keys. He or she can press the
SPEED ▼▲ keys to set the running belt’s speed.
Note:If the user’s heart rate moves into his or her heart rate zone during the
three-minute warm-up period, the Heart Rate Program begins concurrently.
After the warm-up period, the treadmill automatically adjusts the incline to
keep the user’s heart rate at the selected target. The SmartRate® display
indicates which zone: cardiovascular or weight loss, that the user is in.
Note: A user can change the running belt’s speed anytime during a work-
out, but doing so affects the treadmill’s ability to maintain the target heart
rate. It takes time for the treadmill to readjust the incline so that the user’s
heart rate remains on target.
CAUTION: A warning message appears if the user goes above his or her
maximum recommended heart rate target zone. Heed the warning. Make
sure that the user has permission from his or her personal physician
before working out above the maximum recommended zone for his or her
age and fitness level. See Diagram 22 on page 42 for the recommended
target zones.
•
When a user reaches the time limit, a cool-down period begins.The user can
override the speed and incline by pressing the appropriate ▼ or ▲ keys.
Note:The speed remains constant, if the user was at or below 0.5 mph (1.0 kph).
page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
Maintenance
The C936i is built to withstand the rigors of the health club environment.However, as
club manager or owner, you are responsible for cleaning and maintaining the unit’s
integrity.If you fail to maintain the treadmill as described below, it could affect or void
the Precor LimitedWarranty.
DANGER —To reduce the risk of electrical shock, always unplug the unit
from its power source before cleaning it or performing any maintenance tasks.
INSPECTION
Perform a daily inspection of the treadmill.
1. Look and listen for slipping belts, loose fasteners, unusual noises, worn or
frayed power cords, and any other indications that the equipment may be in
need of service. Obtain service should you notice any of the above.
Important:If you determine that the treadmill is in need of service, move it away
from the main workout area and place an large “Out of Service” sign on it.While
it is awaiting service, remove the power cord so no one can use the treadmill.
2. Check for worn, frayed, or missing safety lanyards.Replace missing or worn
safety lanyards immediately. A safety lanyard with its security clip must be
fastened to the treadmill’s red STOP button. Do not allow users on a tread-
mill without it.
To order parts or to contact a Precor authorized service provider in your area,
refer to Obtaining Service on page 7.
CLEANING THE EQUIPMENT
Most of the working mechanisms are protected inside the treadmill’s hood and
solid base. However, for efficient operation, the treadmill relies on low friction.To
keep the friction low, the treadmill must be as clean as possible.
It is recommended that the running bed and belt be cleaned daily. Use a damp,
soft cloth to clean the staging platform, running bed and between the belt and
running bed surface as far as you can easily reach.This removes any dust or dirt
which might affect the smooth operation of the unit.
CAUTION: Never pour water or spray liquids on the display console, hand-
rails, or treadmill. Allow the treadmill to dry completely before using.
Periodically, clean the treadmill’s frame, display console, handrails and running
belt with a dampened (not dripping wet), clean cloth using a diluted solution
of mild soap and water. To clean the grooves on the belt, use a soft nylon
scrub brush. Vacuum the floor underneath the unit every week to prevent the
accumulation of dust and dirt.
The Precor Heart Rate equipment requires little maintenance beyond keeping it
dust free. Dampen a sponge or soft cloth in mild soap and water to wipe the chest
strap. Dry the surface thoroughly with a clean towel.
page 46
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
ALIGNING THE RUNNING BELT
The correct alignment of the running belt is critical to the smooth operation of the
treadmill.The belt is properly aligned at the factory.However, during shipping and
handling or by use on an uneven surface, the belt may move off center and
require a few simple adjustments.
Before aligning the running belt, check its operation by following the procedure in
Checking the Alignment of the Running Belt on page 22. If you determine that
the belt needs alignment, follow the instructions here.
CAUTION: Special care must be taken when aligning the running belt.Turn
OFF the treadmill while adjusting or working near the rear roller. Remove
any loose clothing and tie back your hair. Be very careful to keep your
finger or any other object clear of the belt and rollers, especially in front of
the roller and behind the deck.The treadmill will not stop immediately if an
object becomes caught in the belt or rollers.
Realigning the belt takes a few simple adjustments. If you are unsure about this
procedure, call Precor Customer Support (see Obtaining Service on page 7.)
Take the following steps to align the running belt on the treadmill.To ensure your
safety, make all adjustments while the treadmill is OFF.
1. Make sure the treadmill is OFF and the running belt has completely stopped.
2. Locate the left belt adjustment bolt in the rear end cap of the treadmill. (To
determine left and right, stand at the rear of the treadmill and face the display.)
The direction you turn the bolt depends on how the belt is tracking. Make all
belt adjustments on the left rear corner bolt using the hex key provided.
• If the belt is off center to the LEFT, turn the adjusting bolt ¼ turn clock-
wise, which moves the running belt to the right.
• If the belt tracks off center to the RIGHT, turn the bolt ¼ turn counter-
clockwise; this moves the belt to the left.
Important: Do not turn the adjusting bolt more than ¼ turn at a time. Over-
tightening the bolt can damage the treadmill.
3. Turn ON the treadmill, press QUICKSTART, and then increase the running
belt speed to 3 mph (5 kph) by pressing SPEED ▲.
CAUTION: Stand to the side of the treadmill.The running belt begins
moving automatically after you press QUICKSTART.
4. Observe the running belt for a couple of minutes.The belt should be centered on
the running bed.
CAUTION: If you hear any chafing or the running belt appears to be
getting damaged, stop the running belt immediately by pressing the
red Stop key. Contact Precor Customer Support.
5. If the belt needs additional alignment, repeat steps 1 through 4 of this
procedure until the belt is properly aligned.
6. Press the red STOP button.To return to the Precor banner, press RESET.
page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
C
O
M
M
E
R
C
I
A
L
P
R
O
D
U
C
T
S
D
I
V
I
S
I
O
N
STORING THE CHEST STRAP
Store the chest strap transmitter in a place where dust and dirt cannot accumu-
late on it such as, a closet or drawer. Be sure to keep the chest strap protected
from extremes in temperature. Do not store it in an area that may be exposed to
temperatures below 32 degrees Fahrenheit.
SERVICING THE TREADMILL
Do not attempt to service the treadmill yourself except for the maintenance tasks
described in this manual. The unit does not contain any user-serviceable parts
that require lubrication. Refer to Obtaining Service on page 7.
LONG TERM STORAGE
When the treadmill is not in use for any length of time, turn it OFF.Ensure that the
power cord is unplugged from the wall outlet and is positioned so that it will not
become damaged or interfere with other equipment or people.
page 48
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You and Welcome to Precor
We are confident that you will be pleased with your purchase and
that your new Precor equipment will help satisfy your customers’
fitness needs, while helping you meet your business goals.
To allow us to serve you better, please take a
few moments to complete and return your warranty registration.
YOU MAY ALSO REGISTER ONLINE AT
If you have questions or need additional information,
contact your local dealer or call Precor Customer Support
at 800-786-8404.
Fold along dotted line and tape closed before mailing.
C O M
9 A 8 W 0 , 7 2 - 4 v 0 i l l 0 e 2 o o d i n W
x 7 2 0 2 P O B o
2 0 0 3 1 1 4 2 n d A
P r e c o r I n c o r p o r a t e d
u e e N v n E
H E R E
A M S P T
P L A C E
Download from Www.Somanuals.com. All Manuals Search And Download.
TELL US ABOUT YOUR NEW PRECOR PRODUCTS
Purchased from (Dealer name):
Date of Purchase:
Month
Day
Year
Product Serial Number(s):
Please indicate the type and number of products purchased:
❑ #: ______ Elliptical Fitness CrossTrainer (EFX®)
The serial number is located on the shipping box and on the product.
❑ #: ______ Treadmill
❑ #: ______ Cycle
❑ #:______ Stair Climber
❑ #:______ Strength Station
❑ #: ______ StretchTrainerTM
TELL US ABOUT YOUR FACILITY
Name of Facility
❑ Mr.
❑ Mrs.
❑ Ms.
Contact Person — First Name
Last Name
Apt./Suite:
Facility Address
City
State
Zip Code
Area Code
Facility Telephone Number
Your Business Email Address
How many members do you have?
❑ Less than 100
What percentage of floor space do you allocate for cardio equipment?
❑ 0% to 20% ❑ 20% to 40% ❑ 40% to 60% ❑ 60% to 80%
What type of equipment makes up your cardio offering (check all that apply)?
❑ Treadmills ❑ Ellipticals ❑ Cycles ❑ Stair Climbers ❑ Rowing Machines ❑ Other _____________
What other brands of cardio equipment do you currently offer (check all that apply):
❑ Life Fitness ❑ True ❑ Cybex ❑ StarTrac ❑ Other ______________________________
❑ 100 - 500
❑ 500 - 1000
❑ 1000 - 2000
❑ 2001 +
❑ 80% to 100%
What other Precor equipment do you currently offer (check all that apply):
❑ EFX®
❑ Cycle
❑ StretchTrainerTM
❑ Treadmill
❑ Stair Climber
❑ Strength Machine
❑ Other ______________________________
TELL US ABOUT YOUR PURCHASE
Which best describes this purchase (check all that apply):
❑ First Precor product
❑ Replaces a Precor product of the same type
❑ Replaces same type of product – different brand
❑ Enhancement to equipment already owned
How did you FIRST become aware of this product (choose only one):
❑ Authorized Precor dealer
❑ Precor sales representative
❑ Trade show/conference
❑ Internet
❑ News report or product review
❑ Club/fitness magazine advertisement
❑ Trade/consumer magazine article
❑ Other ________________________________________________________
What factors MOST influenced your decision to purchase this product (choose up to three):
❑ Precor reputation
❑ Prior product experience
❑ Design/appearance
❑ Value for the price
❑ Special product features
❑ Warranty
❑ Service
❑ Rebate or sale price
P/N 45622-101 Effective 30 June 2002
Download from Www.Somanuals.com. All Manuals Search And Download.
Commercial Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED PRODUCT.
BY USING THE EQUIPMENT, YOU ARE CONSENTING TO BE BOUND BY THE FOLLOWING WARRANTY TERMS AND CONDITIONS.
Limited Warranty.
Disclaimer and Release.
Precor Incorporated warrants all new Precor products to be free from defects in materials and
manufacture for the warranty periods set forth below. The warranty periods commence on the
invoice date of the original purchase. This warranty applies only against defects discovered
within the warranty period and extends only to the original purchaser of the product. Parts
repaired or replaced under the terms of this warranty will be warranted for the remainder of
the original warranty period only. To claim under this warranty, the buyer must notify Precor or
your authorized Precor dealer within 30 days after the date of discovery of any nonconformity
and make the affected product available for inspection by Precor or its service representative.
Precor’s obligations under this warranty are limited as set forth below.
The warranties provided herein are the exclusive
warranties given by Precor and supersede any
prior, contrary or additional representations,
whether oral or written. ANY IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE THAT
APPLY TO ANY PARTS DESCRIBED ABOVE ARE
LIMITED IN DURATION TO THE PERIODS OF
EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE
SAME PARTS. PRECOR HEREBY DISCLAIMS AND
EXCLUDESTHOSE WARRANTIES THEREAFTER.
Some States do not allow limitations on how long
Warranty Periods and Coverage.
Commercial Cardiovascular Products, also known as C-Series Products,
(excluding StretchTrainer, Strength Products).
an implied warranty lasts, so the above limitation
may not apply to you. PRECOR ALSO HEREBY
DISCLAIMS AND EXCLUDES ALL OTHER OBLIGA-
TIONS OR LIABILITIES, EXPRESS OR IMPLIED,
ARISING BY LAW OR OTHERWISE, WITH RESPECT
TO ANY NONCONFORMANCE OR DEFECT IN ANY
PRODUCT, INCLUDING BUT NOT LIMITEDTO:
(A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR
REMEDY IN TORT, WHETHER OR NOT ARISING FROM
THE NEGLIGENCE OF PRECOR OR ITS SUPPLIERS
(WHETHER ACTIVE, PASSIVE OR IMPUTED); AND
(B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR
REMEDY FOR LOSS OF OR DAMAGE TO ANY
EQUIPMENT. This disclaimer and release shall
•
•
•
•
•
Seven years frame, five years touch sensor display housing, two years parts, one year labor.
For treadmills, five years motor fan, three years drive motor.
For self-powered ellipticals and bikes, one year battery.
For InSite, one year parts and labor.
Labor coverage for options as defined below.
StretchTrainer
Five years frame, two years parts, 90 days upholstery, no labor.
Strength Products (S3.45 and S3.25 only)
Ten years frame; three years bearings, guide rods, cams, pulleys; one year belts, cables,
hand grips, miscellaneous parts; 90 days upholstery; no labor.
apply even if the express warranty set forth above
fails of its essential purpose.
Options / Accessories / Battery-powered or Self-Operated Devices
Many options or accessories have components that are connected internally or mounted inside
the electronic console. The following guidelines determine the warranty for these components. If
the internal components are installed by the factory or by an authorized dealer as part of the
original sale and delivery, they have a warranty that is identical to the warranty of the equipment in
which they are connected or mounted. If the internal components are not installed by the factory or
by an authorized dealer as part of the original sale and delivery, they have a 90 days parts and
labor limited warranty. All components that are not internally connected have a 90 days parts only
limited warranty. Satisfactory proof of purchase is required in all cases.
Exclusive Remedies.
For any product described above that fails to
conform to its warranty, Precor will provide, at
their option, one of the following: (1) repair;
(2) replacement; or (3) refund of the purchase
price. Precor Limited Warranty service may be
obtained by contacting the authorized dealer
from whom you purchased the item. Precor
compensates Servicers for warranty trips within
their normal service area to repair commercial
equipment at the customer’s location.You may
be charged a trip charge outside the service
area.THESE SHALL BE THE SOLE AND
EXCLUSIVE REMEDIES OF THE BUYER FOR
ANY BREACH OF WARRANTY.
Conditions and Restrictions.
This warranty is valid only in accordance with the conditions set forth below:
1. The warranty applies to the Precor product only while
a. it remains in the possession of the original purchaser and proof of purchase is
demonstrated,
b. it has not been subjected to accident, misuse, abuse, improper service, or non-Precor
modification.
c. claims are made within the warranty period.
2. Certain products are warranted for standard commercial use only (defined as use in non-fee
paying clubs or facilities and less than 6 hours daily use. Unapproved use voids the warranty.
Current standard commercial products include C936i, C932i, EFX524i, EFX534i.).
3. This warranty does not cover damage or equipment failure caused by electrical wiring
not in compliance with electrical codes or Precor owner’s manual specifications, or failure
to provide reasonable and necessary maintenance as outlined in the owner’s manual.
EXCLUSION OF CONSEQUENTIAL
AND INCIDENTAL DAMAGES.
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO
OBLIGATION OR LIABILITY, WHETHER ARISING IN
CONTRACT (INCLUDINGWARRANTY), TORT
(INCLUDING ACTIVE, PASSIVE, OR IMPUTED
NEGLIGENCE AND STRICT LIABILITY), OR OTHER-
WISE, FOR DAMAGE TO THE EQUIPMENT, PROP-
ERTY DAMAGE, LOSS OF USE, REVENUE OR
PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE
EQUIPMENT, ADDITIONAL COSTS INCURRED BY
BUYER (BY WAY OF CORRECTION OR OTHERWISE)
OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT,
OR CONSEQUENTIAL DAMAGES, WHETHER
RESULTING FROM NONDELIVERY OR FROM THE
USE, MISUSE OR INABILITY TO USE THE PRODUCT.
This exclusion applies even if the above warranty
fails of its essential purposes and regardless of
whether such damages are sought for breach of
warranty, breach of contract, negligence, or strict
liability in tort or under any other legal theory.
Some states do not allow the exclusion or
4. Except in Canada, Precor does not pay labor outside the United States.
5. Warranties outside the United States and Canada may vary. Please contact
your local Dealer for details.
This Limited Warranty shall not apply to:
1. Software (PROM) version upgrades.
2. Normal wear and tear, consumables and cosmetic items, including, but not limited to
the following: grips, seats, and labels.
3. Repairs performed on Precor equipment missing a serial number or with a serial tag
that has been altered or defaced.
4. Service calls to correct installation of the equipment or instruct owners on how to use
the equipment.
5. Pickup and delivery involved with repairs.
6. Any labor costs incurred beyond the applicable labor warranty period.
Complete this portion and keep for your records.
limitation of incidental or consequential damages,
so the above limitation may not apply to you.
Purchased From: ___________________________ Example: Dealer or store name.
Phone Number: ____________________________ Example: Dealer or store telephone number.
Product/model: _____________________________ Example: EFX534i or C966i
This warranty gives you specific legal rights, and
you may also have other rights, which vary from
Serial number: _____________________________
The serial number is found on the shipping container.
state to state.
Effective 01 December, 2004
P/N 36286-111
Download from Www.Somanuals.com. All Manuals Search And Download.
C936i Standard Commercial Treadmill featuring Heart Rate and SmartRate® Systems
Product Specifications:
Electronic Specifications
Length: 79 inches (201 cm)
C936i Programs: 6
C936i Display Readouts:
Width: 34 inches (85 cm)
Height: 55 inches (140 cm)
Cross Country
Heart Rate*
Interval
Calories
Calories Per Minute
Distance
Weight: 280 lbs (127 kg)
Shipping weight: 345 lbs (156 kg)
Manual
Heart Rate*
Incline
Running surface: 57 inches x 20 inches
(145 cm x 51 cm)
Random
Weight Loss
Mets
Motor: 3.0 hp continuous duty
Power: 120/240 VAC (50/60Hz)
Speed: 0.5 to 11 mph (1 to 18 kph)
Incline: 0.5% to 15% grade
Program Profile
Speed
SmartRate® *
Time
Frame: Powder-coated steel
Regulatory Approval: FCC, ETL, CE
* Requires that the user wear
a chest strap, or place both
hands on the touch-sensitive
handrail grips.
C936i Features:
CSAFE
Heart Rate Telemetry
QuickStartTM
Reversible Deck
SmartRate®
Touch-Sensitive Display
Precor, CrossRamp, EFX, M, Move Beyond and SmartRate are registered
trademarks of Precor Incorporated.
QuickStart is a trademark of Precor Incorporated.
Copyright 2004 Precor Incorporated.
Specifications subject to change without notice.
C936i Lit Kit# 44132-111
OM# 44159-111
Online OM# 44159-411
Registration Card# 45622-101
Warranty# 36286-111
18 February 2005
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
NOTICE:
Precor is widely recognized for its innovative, award winning designs of exercise equipment. Precor
aggressively seeks U.S. and foreign patents for both the mechanical construction and the visual as-
pects of its product design. Any party contemplating the use of Precor’s product designs is hereby
forewarned that Precor considers the unauthorized appropriation of its proprietary rights to be a very
serious matter. Precor will vigorously pursue all unauthorized appropriation of its proprietary rights.
Download from Www.Somanuals.com. All Manuals Search And Download.
|