5.35
5.33
5.31
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
When using the EFX, always take basic precautions,
including the following:
•
Never leave the EFX unattended when it is plugged in.
Unplug the EFX from the power source when it is not in
use, before cleaning it, and before providing authorized
service.
•
Read all instructions before using the EFX. These
instructions are written for your safety and to protect the
unit.
•
•
•
Assemble and operate the EFX on a solid, level surface.
Locate the EFX a few feet from walls or furniture. Keep
the area around the EFX clear.
•
Before beginning any fitness program, see your
physician for a complete physical examination.
Maintain the EFX in good working condition. Refer to
the Maintenance section. Routinely check and make
sure that all fasteners are secure.
Il est conseillé de subir un examen médical complet
avant d’entreprendre tout programme d’exercise. Si
vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
Use the EFX only for its intended purpose as described
in this manual. Do not use accessory attachments that
are not recommended by the manufacturer, as such
attachments may cause injuries.
To reduce the risk of electrical shock
DANGER
always unplug the EFX from the
electrical outlet immediately after using
and before cleaning.
•
Never operate the unit if it is damaged, not working
properly, when it has been dropped, or has been
immersed in water. Return the EFX to a service center
for examination and repair.
To reduce the risk of burns, fire,
electric shock, or injury, take the
following precautions:
WARNING
•
•
Keep the power cord and plug away from heated
surfaces.
•
Do not allow children or those unfamiliar with its
operation on or near the EFX. Do not leave children
unsupervised around the unit.
Do not operate the EFX where aerosol (spray) products
are being used or where oxygen is being administered.
Owner’s Manual: Important Safety Instructions
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not use outdoors.
•
•
Keep your body and head facing forward. Never attempt
to turn around on the EFX.
Do not attempt to service the EFX yourself except to
follow the maintenance instructions found in this manual.
Never place your hands or feet in the path of the roller
arm because injury may occur to you or damage may
occur to the equipment.
•
•
Never drop or insert objects into any opening. Keep
hands away from moving parts.
•
•
•
Always use the locking pin to secure the foot pedals
when the EFX is not in use.
Keep all electrical components, such as the power
cord and power switch, away from liquids to prevent
shock.
Do not rock the unit. Do not stand on the handrail(s),
display console, or covers.
•
Do not hang anything on the handrails, moving
handlebars, or covers. Place liquids, magazines, and
books in the appropriate receptacles.
Do not overexert yourself or work to exhaustion. If you
feel any pain or abnormal symptoms, stop your workout
immediately and consult your physician.
The EFX must be connected to a
properly grounded outlet. See
Grounding Instructions.
•
When the EFX is not in use, disconnect the unit by
turning the power switch to the Off position, and then
remove the power plug from the wall outlet.
DANGER
•
Wear proper exercise clothing and shoes for your
workout and avoid loose clothing. Do not wear shoes
with heels or leather soles. Check the soles of your
shoes and remove any dirt and embedded stones. Tie
long hair back.
Safety Approval
When identified with the ETL-c logo, the unit has
been tested and conforms to the requirements of
CAN/CSA-E-335-1/3-04, EN 60335-1: 2002 Safety of
Household and Similar Electrical Appliances.
•
•
Use care when getting on or off the EFX. Use the
stationary handrail for stability.
For safety, hold onto a stationary handrail while using
the EFX.
Owner’s Manual: Important Safety Instructions
2
Download from Www.Somanuals.com. All Manuals Search And Download.
120 V Units Designated for U.S. Markets
Grounding Instructions
The grounding plug on the EFX looks like the plug shown in
Diagram 1. The power outlet must have the same
configuration as the plug. No adapter should be used with
this product.
The EFX must be grounded. If the unit malfunctions or
breaks down, grounding provides a path of least resistance
for electric current, which reduces the risk of electrical
shock. The unit is equipped with a power cord having an
equipment-grounding conductor and a grounding plug.
The plug must be inserted into an outlet that is properly
installed and grounded in accordance with all local codes
and ordinances. Failure to properly ground the EFX could
void the Precor Limited Warranty.
Improper connection of the equipment-
DANGER
grounding conductor can result in a risk
Diagram 1: 120-volt power plug
of electric shock. Check with a qualified
electrician or service person if you are in
doubt as to whether the unit is properly
grounded. Do not modify the plug
provided with the EFX. If it does not fit
the outlet, get a proper outlet installed
by a qualified electrician.
Owner’s Manual: Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Department of Communications
Radio Frequency Interference (RFI)
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus set out in the
Radio Interference Regulations of the Canadian
Department of Communications.
Federal Communications Commission, Part 15
The EFX has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. The EFX generates, uses, and can
radiate radio frequency energy and, if not installed and used
in accordance with the owner’s manual instructions, may
cause harmful interference to radio communications.
Le présent appareil numérique n’émet pas de bruits
radioéélectriques dépassant les limites applicables aux
appareils numériques de la class B prescrites dans le
Règlement sur le brouillage radioélectrique édicté par le
ministére des Communications du Canada.
ATTENTION: Haute Tension
Débranchez avant de réparer
Per FCC rules, changes or
WARNING
modifications not expressly approved
by Precor could void the user’s
authority to operate the equipment.
Owner’s Manual: Important Safety Instructions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
European Applications
Obtaining Service
This product conforms to the requirements of the European
Council Directive 2004/108/EC, Electromagnetic
Compatibility and has been tested to the following
standards:
You should not attempt to service the EFX except for
maintenance tasks as described in this manual. The EFX
does not contain any user-serviceable parts that require
lubrication. For information about product operation or
•
EN55022, Limits & Methods of Measurement of Radio
Interference, Information Technology Equipment.
Should you need more information regarding customer
support numbers or a list of Precor authorized service
contact.
•
EN50024, Immunity of Information Technology
Equipment
This product is compliant to 2002/95/EC, Restriction of
Hazardous Substances Directive.
For future reference, write the model, serial number, and
date of purchase for your unit in the space provided. The
serial number is printed on a label located beneath the
power receptacle (Diagram 2).
This product also conforms to the requirements of the
European Council Directive 2006/95/EC, Low Voltage
Directive and has been tested to the following standard:
Model #: _______
Serial #: _______________________
•
IEC 335-1, Safety of Household and similar Electrical
Appliances.
Date purchased: _________________________
Serial number
label
Diagram 2: Location of serial number
Owner’s Manual: Important Safety Instructions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Display Console ..............................................................19
More Information about the Upper Display .................. 20
More Information about the Lower Display .................. 21
Keypads ............................................................................... 23
Important Safety Instructions .............................1
Safety Approval .....................................................................2
Grounding Instructions ........................................................3
Radio Frequency Interference (RFI) .................................4
European Applications ........................................................5
Obtaining Service .................................................................5
User Identification ..........................................................28
Adding a User ..................................................................... 29
Updating User Information on the EFX5.35 ................. 30
Updating User Information on
The Locking Pin .....................................................................9
Converting Handlebar Positions .................................... 10
Using the Stationary Handrail ......................................... 11
Moving Handlebars Support the
the EFX5.31 or EFX5.33 .................................................. 31
Changing the User Name and
Clearing Workout Statistics ............................................ 32
Total Body Workout .......................................................... 11
Turning the Unit On and Off ............................................ 11
Weight Limit ........................................................................ 11
Location ............................................................................... 12
Workout Options ............................................................33
Choosing QUICKSTART ................................................. 34
Selecting a Program .......................................................... 35
Selecting a User Key ......................................................... 36
Cooling Down After a Workout ...................................... 37
Pausing During a Workout or the
Heart Rate Features ...................................................... 13
Important Use and Safety Information .......................... 13
Using the Heart Rate
Cool-Down Period ............................................................. 38
Ending a Workout .............................................................. 38
Touch-Sensitive Handrail Grips ..................................... 16
Using SmartRate ................................................................ 16
Exercise to Your Target Heart Rate ............................... 18
Heart Rate Analysis ........................................................... 18
Owner’s Manual: Table of Contents
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs .......................................................................... 39
Choosing a Program ......................................................... 39
Changing Programs in Mid-session .............................. 39
Program Tips ...................................................................... 40
Manual Program ................................................................. 41
Interval Program ................................................................. 41
Aerobic Endurance Program ........................................... 42
Hill Climb Program ............................................................ 42
Heart Rate Programs ........................................................ 43
Weight Loss Programs ..................................................... 46
Gluteal Program ................................................................. 47
CrossTrainer Program ...................................................... 47
Maintenance ....................................................................56
Inspection ............................................................................ 56
Cleaning the Equipment ................................................... 56
Storing the Chest Strap ................................................... 57
Long-Term Storage ............................................................ 57
Precor Residential Equipment
Limited Warranty.................................................. 58
Advanced Programming and Troubleshooting ..... 48
Advanced Programming Tips .......................................... 48
Changing EFX Settings .................................................... 49
Informational Displays ....................................................... 51
Troubleshooting Error Codes ......................................... 54
Troubleshooting Heart Rate ............................................ 55
Owner’s Manual: Table of Contents
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Owner’s Manual: Table of Contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX Features
The EFX is equipped with certain items that, when used
properly, help sustain a safe and enjoyable workout. These
items include:
After exercising, use the locking pin to secure the foot
pedals.
•
•
•
Locking pin location
Convertible handlebars (EFX5.35. only)
Roller arm
Stationary handrails with heart rate feature (EFX5.35 and
EFX 5.33 only)
•
•
Moving handlebars (EFX5.35 and EFX5.33 only)
Power switch location
Locking
pin
The Locking Pin
CAUTION: Always use the locking pin to secure the foot
pedals when the EFX is not in use.
Diagram 3: Remove locking pin before exercising
Storage location
Lanyard
Ramp
The locking pin secures the foot pedals to keep them from
traveling up or down the ramp. Before beginning your
workout, pull firmly on the pin to slide it out of the roller arm.
Refer to Diagram 3. A lanyard attaches the locking pin to the
ramp.
Store the locking pin underneath the ramp once it is removed
from the roller arm. Refer to Diagram 4.
Diagram 4: Store the locking pin under the ramp
Owner’s Manual: EFX Features
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The following steps explain how to convert the handlebars
from a Lower Body to a Total Body position or vice versa.
Converting Handlebar Positions
The EFX5.35 handlebars can be locked in either a stationary
(Lower Body) or moving arm (Total Body) position
1. Hold the link arm securely with one hand as you press the
button on the quick release pin with your thumb. Pull the
quick release pin out of its receiver.
depending on your exercise preference. Refer to Diagram 5.
CAUTION: Never attempt to change the handlebar
connection when the EFX5.35 is in use.
2. Rotate the link arm 90° so the quick release pin is aligned
with the other receiver. For example, the locking receiver
for the Total Body handlebars is beneath the foot pedal. If
you wish to lock the handlebars in the Lower Body
position, the locking receiver is on the base frame just in
front of the rear cover.
Receiver for Total Body is
located on the foot pedal.
CAUTION: Be aware of handlebar movement. If you
move the link arm, it also causes the handlebar to
move. Do not drop the link arm. Dropping the link arm
may chip the paint on the EFX. To avoid injury to you or
your assistants, be aware of the location of the
handlebars during the conversion process.
Receiver label
Rear covers
3. Press the button on the quick release pin and slide the
pin into the appropriate receiver.
Receiver for
Lower Body is
located on the
base
4. Let go of the button and make sure the link arm is
securely locked into position by pushing and pulling it
firmly.
frame.
5. Perform the same steps for the opposite handlebar.
Receiver label
CAUTION: Make sure the quick release pin is fully
engaged in the receiver and locked in position before
using the EFX.
Diagram 5: Converting the handlebars
Owner’s Manual: EFX Features
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stationary Handrail
To maintain your balance, always grasp a stationary handrail
when you step on or off the foot pedals, and when you use
the keypad.
Turning the Unit On and Off
To turn the unit On and Off, use the power switch located at
the rear of the unit, near the power cord receptacle. Refer to
Diagram 6.
Important: When it is not being used, turn the unit Off.
EFX5.35 and EFX5.33, refer to Heart Rate Features.
Power switch
I = On
O = Off
Moving Handlebars Support the Total
Body Workout
The handlebars on the EFX5.35 and EFX5.33 provide an
upper-body workout which helps increase cardiovascular
fitness. By adding the total body movement to your cross
training workout, you are actually increasing your work effort
and enhancing your overall fitness level.
Diagram 6: Power switch
Weight Limit
The equipment has been durability tested to 350 lb (160 kg).
Owner’s Manual: EFX Features
11
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX5.33 and EFX5.35
Location
It is important to keep a minimum of one foot (30 cm) around
the EFX open and free from encumbrances such as other
equipment.
1. Lock the handlebars in the Lower Body position. Refer to
the labels on the base of the EFX and to the instructions
found in Converting Handlebar Positions.
2. Determine a comfortable height for lifting and have your
assistant grasp one handlebar while you grasp the
opposite one.
CAUTION: If you plan to move the EFX, obtain help and
use proper lifting techniques.
To move the EFX, the two of you need to stand on opposite
sides and face the rear of the EFX. Follow the appropriate
steps for the EFX you own.
3. Lift the EFX and roll it on the rear rollers to the desired
location.
EFX5.31
1. Have your assistant grasp
one shaft cover while you
grasp the opposite one.
Shaft
2. Lift the EFX and roll it on
covers
the rear rollers to the
desired location.
Owner’s Manual: EFX Features
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Features
Important Use and Safety Information
Read the following before using the heart rate or SmartRate
features.
109
•
•
Consult your physician before engaging in any vigorous
exercise. Do not use the heart rate programs until
authorized by your physician.
SmartRate
Know your heart rate and your physician-recommended
according to several physiological factors and may not
correspond directly with Diagram 7.
Heart rate and SmartRate® features are available when
you wear the chest strap or grasp both touch-sensitive
handrail grips.
Note: The EFX5.31 does not have touch-sensitive handrail
grips. To use the heart rate and SmartRate features, a chest
strap must be worn. To purchase a chest strap, contact your
dealer. Refer to Obtaining Service.
When a heartbeat is detected, the HEART RATE display
shows your heart rate and, if your age has been entered, the
SmartRate LED pulses and indicates your target zone.
Owner’s Manual: Heart Rate Features
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The calculation used for the heart rate target zone is:
(220 minus your age) multiplied by a percent.
•
•
After you put on the chest strap, face the display console
for a few seconds. This allows the receiver in the console
to recognize the signal from the chest strap.
For example:
Low range: (220 minus your age) multiplied by 55%
If Hr appears in the display, the EFX is detecting a signal,
but has not yet determined your heart rate. Make sure the
chest strap is positioned properly around your chest and
against your skin.
High range: (220 minus your age) multiplied by 85%
Refer to Table 1 in Using SmartRate.
•
•
If you prefer to use the touch-sensitive handrail grips on
the EFX5.35 or EFX5.33, grasp both grips and wait five
to ten seconds. Make sure both hands are moist.
200
190
180
Note: When a signal is detected, the heart rate icon
flashes and a number appears in the HEART RATE
display and indicates your heart rate.
High
170
160
150
140
130
Always face forward on the EFX and use the stationary
handrail for balance. Keep upper body movement to a
minimum.
Peak
120
Cardio
110
100
90
Fat Burn
80
Warmup
70
20 25 30 35 40 45 50 55 60 65 70 75
Your Age
Diagram 7: Heart rate target zones
Owner’s Manual: Heart Rate Features
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Adjust the strap and fasten it around your chest. The strap
should feel snug, not restrictive. Refer to Diagram 9.
Wearing a Chest Strap
During a workout, the heart rate features appear on the
display when you wear a chest strap. To receive an accurate
reading, the chest strap needs to be in direct contact with
your skin.
1. Carefully dampen the back of the strap with tap water
Refer to Diagram 8.
Diagram 9: Adjust chest strap
Note: Do not use deionized water. It does not have the
proper minerals and salts to conduct electrical impulses.
3. Make sure that the chest strap is right side up, lies
horizontally across your chest, and is centered in the
middle of your chest. Refer to Diagram 10.
Diagram 8: Moisten chest strap
Diagram 10: Fasten chest strap
After you put on the chest strap, face the display console for
a few seconds. This allows the receiver in the console to
recognize the signal from the chest strap.
Owner’s Manual: Heart Rate Features
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Usually, the concentration of salts in a person's perspiration
provides enough conductivity to transmit a signal to the
receiver inside the display console. However, some people,
because of body chemistry or erratic heart beats cannot use
the touch-sensitive heart rate feature on the EFX. A chest
strap may provide better results.
Using the Heart Rate
Touch-Sensitive Handrail Grips
While exercising on the EFX5.35 or EFX5.33, you must
grasp both touch-sensitive handrail grips for a minimum of
five to ten seconds to transmit your heart rate to the display.
Refer to Diagram 11.
Important: While exercising, do not grasp the touch-
sensitive handrail grips and wear the chest strap at the
same time. The touch-sensitive handrail grips override the
signals from the chest strap transmitter. If used together,
inconsistent readings may occur.
Using SmartRate
The SmartRate feature helps you monitor and maintain your
heart rate in the target zone best suited to your specific
needs. All 7 LEDs may light during a workout. When the EFX
detects a heart rate, a single LED blinks and indicates the
zone that your heart rate is in.
Touch-sensitive
handrail grips
Important: To use the SmartRate feature, you must choose
a program and enter your age during the setup phase of
your exercise session.
Diagram 11: Touch-sensitive handrail grips
Owner’s Manual: Heart Rate Features
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 1. Heart rate target zones and SmartRate LEDs
Table 1 shows the percents used in calculating the heart rate
target zones. While your heart rate remains within these
zones, the corresponding light blinks and provide a visual cue.
Heart Rate Zone
Percent
Above 87
85 to 87
78 to 84
70 to 77
62 to 69
55 to 61
Below 55
LED Blinking
Seventh
Sixth
Label
HIGH
The calculation used to determine your maximum aerobic heart
rate is (220 minus your age). When you multiply it by the
percent indicated in Table 1, you can understand the relation-
ship between the pulsating LED and your target heart rate.
PEAK
Fifth
CARDIO
CARDIO
FATBURN
FATBURN
WARMUP
Fourth
Third
CAUTION: Your heart rate should never exceed 85% of
your maximum aerobic heart rate or go above PEAK. If it
does, immediately reduce your strides per minute, adjust
the CrossRamp, or resistance to return your heart rate to
your physician-recommended target zone.
Second
First
The SmartRate indicator lights do not appear when:
•
•
•
•
You press QUICKSTART at the banner.
You do not enter your age before starting a program.
You do not wear or improperly position the chest strap.
You fail to grasp both touch-sensitive handrail grips on
the EFX5.35 or EFX5.33, for five to ten seconds.
Owner’s Manual: Heart Rate Features
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Exercise to Your Target Heart Rate
Heart Rate Analysis
Every time you complete a program using the chest strap or
touch-sensitive handrail grips, the EFX provides a heart rate
analysis after the workout summary.
A dedicated window displays your heart rate while
exercising. To view your heart rate (beats per minute) on the
display, either wear a chest strap or grasp both touch-
sensitive handrail grips.
Your average heart rate appears followed by the maximum
appears, if you entered your age, and indicates the amount of
time your heart rate remained between the target zones
shown.
Note: The EFX5.31 does not have the touch-sensitive
handrail grips so you must purchase the optional chest strap
transmitter to monitor your heart rate.
suggestions for workouts with varying levels of intensity. It
provides many workout details that include the appropriate
target heart rate.
The heart rate analysis is based on how often your heart rate
signal is received while exercising. If you use the chest strap,
the average heart rate will be more accurate than if you
occasionally grasp the touch-sensitive handrail grips.
The EFX includes a program that lets you exercise based on
a specified target heart rate. As you exercise, the Basic HRC
Program monitors your heart rate and automatically
maintains it within a few beats per minute (bpm) of your
selected target.
To use this program, press the PROGRAMS - HEART RATE
key. For more information, refer to Programs.
Owner’s Manual: Heart Rate Features
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Console
Upper display: Initially shows the
Precor banner. It changes to the
program profile when you select a
program or press QUICKSTART. A
blinking column in the profile
indicates your position.
SmartRate display: LEDs light in this
column when the SmartRate feature is
activated. Follow the LEDs to monitor your
heart rate and maintain it in your target zone.
HEART RATE display: Use a chest
strap or grasp both touch-sensitive
grips (EFX5.35 or EFX5.33) to
display and monitor your pulse.
DATA
Number keys: During an exercise
session, use the number keys to answer
prompts and update information.
HEART
PROGRAMS keypad: To begin an
exercise session, press a PROGRAMS
key to view a menu of programs within
each category. For program
RATE
MANUAL
INTERVAL
VARIETY
WEIGHT LOSS
SmartRate
PERFORMANCE
RESET key: Press this key to end your
session and view your workout summary.
Pressing the key a second time, causes the
display to reset to the Precor banner.
descriptions, refer to Programs.
Before beginning any fitness
program, see your physician for
a
thorough physical
examination. Seek advice from your physician to learn the
target heart rate appropriate for your fitness level. Do not allow
children or those unfamiliar with its operation on or near this
equipment. Read the product owner's manual or consult
a
qualified instructor before operating this equipment. Improper
use of this equipment can result in serious injury. If you feel
pain, faintness, or dizziness, stop exercising immediately.
User 1—2: Press a USER key at the
Precor banner to personalize your
exercise experience. The information is
stored for future exercise sessions.
RESET
OK and Navigational arrow keys: Use the
OK key to confirm responses to specific
prompts. The up and down arrow keys
present the available selections and affect
what appears on the display. Refer to the
Navigational Keypad.
Copyright 2007 Precor Incorporated en
TIME ELAPSED
TOTAL STRIDES
STRIDES/min
Selection key: Press the key to move
through the information in the column, so
you can choose what you want to display
during your session. Indicator lights
appear next to the item that is displayed.
You can perform the same function with the
right selection key.
TIME REMAINING
CALORIES
VERTICAL GAIN
Lower display: While you exercise, six
sets of numbers show information
about your session. Refer to More
Information about the Lower Display
QUICK
START
RESISTANCE arrow keys: Use the arrow keys
to adjust the resistance.
CROSSRAMP arrow keys: Use the
arrow keys to adjust the ramp incline.
Owner’s Manual: Display Console
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Column height
CrossRamp settings
More Information about the Upper
Display
19 — 20
16 — 18
13 — 15
10 — 12
7 — 9
4 — 6
SmartRate
1 — 3
Diagram 12: EFX5.35 column height in the program profile
Column height CrossRamp settings
13 — 14
11 — 12
9 — 10
7 — 8
HEART RATE—displays your heart rate when you wear a
chest strap or grasp both touch-sensitive grips. Refer to
Heart Rate Features.
5 — 6
3 — 4
SmartRate—displays your heart rate as a blinking bar which
indicates the zone you are in when you wear a chest strap or
grasp both touch-sensitive grips. Refer to Using SmartRate.
1 — 2
Diagram 13: EFX5.33 and EFX5.31 column height in the
program profile
PROGRAM PROFILE—In most programs, the CrossRamp
setting affects the column height in the program profile as
shown in Diagrams 12 and 13. The profile raises or lowers
according to which arrow key is pressed.
Owner’s Manual: Display Console
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME ELAPSED, TIME REMAINING and
CALORIES
TIME ELAPSED—displays workout time in minutes and
seconds and indicates the amount of time you have
been exercising. When you exceed 60 minutes during a
single workout, the TIME ELAPSED display converts to
hours and minutes.
More Information about the
Lower Display
TIME ELAPSED
TIME REMAINING
CALORIES
TOTAL STRIDES
STRIDES/min
VERTICAL GAIN
TIME REMAINING—shows the amount of time
remaining in a workout. If the selected workout time is
less than 60 minutes, the display shows time in minutes
and seconds. If you select a workout time greater than
60 minutes, the display reflects hours and minutes until
the countdown reaches 60 minutes, at which time the
display reverts to minutes and seconds.
QUICK
START
CALORIES—displays the estimated cumulative number
of calories burned. The calorie calculation is derived
from the pedaling speed, resistance, and your weight.
An accurate weight entry results in a more accurate
calorie count. When using QUICKSTART and a weight
has not been specified, the default weight is 150
pounds (68 kilograms).
The lower display provides information about your exercise
session. The two center windows automatically provide
information about your CrossRamp and resistance settings.
To choose the type of information displayed in the left and
right windows, press the adjacent Selection key. The
numbers that appear relate to your workout statistics and are
described below.
Note: If you choose to rest a book or magazine on the
display, you can still view these workout statistics.
Owner’s Manual: Display Console
21
Download from Www.Somanuals.com. All Manuals Search And Download.
STRIDES/min—displays the number of strides you
complete in a minute up to a maximum value of 510
strides per minute. A stride is an exaggerated walking
movement. If you start in a position with one foot plate
forward, a stride is completed when you move the rear
foot pedal all the way forward while the other foot plate
moves to the rear. Two strides create one complete
revolution of the flywheel. So, the value that appears on
the display is always an even number between 20 and
510. The average, effective exercise pace is between
100 to 150 strides per minute.
CROSSRAMP
CROSSRAMP—displays the incremental motion
affected by the ramp position. The CROSSRAMP
arrow keys affect the lift and let you set a ramp incline
between 1 and 20 on the EFX5.35 and between 1 and
14 on the EFX5.33 and EFX5.31. The value displayed
can change in whole number increments.
RESISTANCE
RESISTANCE—displays the resistance you feel against
your stride. The RESISTANCE arrow keys let you set a
resistance level between 1 and 20.
VERTICAL GAIN—displays an estimate of your
cumulative vertical gain in feet or meters based on your
CrossRamp level, resistance level, weight, and caloric
expenditure. You can use the VERTICAL GAIN display
as a unique motivational unit of measurement and
realize your fitness goals by varying the elliptical motion
of the EFX. Higher CrossRamp and resistance levels
will result in greater vertical gain.
TOTAL STRIDES, STRIDES/min and
VERTICAL GAIN
TOTAL STRIDES—shows the total number of strides
completed, which is always an even number since two
strides create one complete revolution of the flywheel.
A stride is an exaggerated walking movement. On the
EFX, if you start in a position with one foot pedal
forward, a stride is completed when you move the rear
foot pedal all the way forward while the other foot pedal
moves to the rear.
Owner’s Manual: Display Console
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Lower Display Keypad and the Selection Keys
Keypads
Use the keypads to enter your workout session selections, to
affect what appears on the display, and to establish your
CrossRamp and resistance preferences.
TIME ELAPSED
TIME REMAINING
CALORIES
TOTAL STRIDES
STRIDES/min
VERTICAL GAIN
Five distinct keypads exist on the display and are discussed
in this section:
•
•
•
•
•
Lower Display keypad and the Selection keys
User identification keys
QUICK
START
Navigational keypad in the center of the display
PROGRAMS keypad
Number keypad with the ENTER and CLEAR keys
Diagram 14: Lower Display keypad and the Selection keys
Left Selection Key: Every time you press this key the
display reflects: the time elapsed since you began your
exercise session, the time remaining, or your cumulative
calories. An LED lights and indicates which information
is being displayed. The TIME REMAINING display is lit
when you begin a program.
Owner’s Manual: Display Console
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CROSSRAMP: Press and hold the CROSSRAMP
arrow keys to increase or decrease the ramp incline
from 1 to 20 on the EFX5.35 or 1 to 14 on the EFX5.33
and EFX5.31.
RESISTANCE: Press and hold the RESISTANCE
arrow keys to increase or decrease the resistance in
from 1 to 20.
Right Selection Key: Every time you press this key the
display reflects your cumulative strides, your strides per
minute, or your vertical gain. An LED lights and
indicates which information is being displayed.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display.
Ramp changes occur only when the foot pedals are in
motion. The number that appears on the display
indicates the selected CrossRamp setting, not the
degree of incline. There is not a one-to-one relationship
between the degree of incline and the CrossRamp
setting.
The CrossRamp setting affects the column height in the
program profile. Refer to Diagram 12.
QUICKSTART: Press QUICKSTART to start your
workout immediately using the Manual Program. Refer
to Choosing QUICKSTART.
Owner’s Manual: Display Console
24
Download from Www.Somanuals.com. All Manuals Search And Download.
User Keys
Navigational Keypad
RESET
Diagram 15: User keys
Diagram 16: Navigational keypad
USER Keys: To personalize your exercise session, press a
USER key (1 or 2) at the Precor banner. On the EFX5.35,
selecting a USER key lets you track your workout statistics
from session to session. On the EFX5.35, EFX5.33, and
EFX5.31, when you choose a USER key, personal
information such as age, weight, and gender are reinstated
after you select your preferred program. If you haven’t
already done so, you’ll need to select a user number and
enter a user name. For more information, refer to Adding a
User or Selecting a User Key.
The navigational keypad provides several ways to change
your exercise session and to display various workout
statistics. The OK key, which allows you to confirm display
selections, is also part of the navigational keypad.
Up and Down Arrows: These up and down arrows
present the available selections and affect what
appears on the display.
OK: Use the OK key to confirm responses to specific
RESET: During an exercise session, press RESET
once to end your session and display a workout
summary. Press it again to return to the Precor banner.
Refer to Pausing During a Workout or the Cool-Down
Period.
Owner’s Manual: Display Console
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2. Available programs
PROGRAMS Keypad
PROGRAMS key
MANUAL
Menu Selections
Manual
INTERVAL
VARIETY
Interval
Aerobic Endurance
Hill Climb
HEART
RATE
MANUAL
HEART RATE
Basic HRC*
Fitness Test*
Fat Burner
Weight Loss
Gluteal
INTERVAL
VARIETY
WEIGHT LOSS
WEIGHT LOSS
PERFORMANCE
PERFORMANCE
CrossTrainer
Diagram 17: PROGRAMS keypad
* Use of chest strap or the touch-sensitive handrail grips is required.
The PROGRAMS keypad provides access to all the exercise
programs. Choose one of the six keys by pressing in the
center of the key and the top level program in the menu
appears on the display. Pressing the key again displays the
next program in the menu, if one is available. Refer to
Table 2. For a description of each program, refer to
Programs.
Note: Use the OK key to confirm your selection. For more
information, refer to Workout Options.
Owner’s Manual: Display Console
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Number Keypad
DATA
Diagram 18: Number keypad
The CLEAR and ENTER keys provide the following
functions:
CLEAR: Use the CLEAR key to remove the last number
being displayed.
ENTER: Use the ENTER key to accept the number being
displayed.
Note: The OK and ENTER keys are interchangeable and
provide the same function when no peripheral devices are
attached to the EFX.
Owner’s Manual: Display Console
27
Download from Www.Somanuals.com. All Manuals Search And Download.
User Identification
Choosing a user identification (USER) key enables the EFX
to identify you. Once you configure your USER key, you can
personalize your workout session and store information
about your preferred program, workout time, weight, age,
and gender.
This section explains how to:
•
•
•
Update your personal information.
Change the user name and clear your workout statistics.
The USER keys allow two people to customize, store, and
retrieve workout selections. On the EFX5.35 you can also
track your cumulative workout statistics.
Initially, you must “add a user” so the EFX can store exercise
session information associated with the specific user key.
Once you enter the requested information, it is stored until
you opt to change it. You can select the same USER key
time and time again, and your user preferences will
automatically be re-instated. Refer to Adding a User.
Owner’s Manual: User Identification
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When you are satisfied with your name or user
identification, press OK.
Adding a User
5. The display then prompts you to enter your weight, age,
and gender.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
you enter the gender type, the display indicates that the
user setup is complete and resets to the Precor banner.
To add a user, select a user number by taking the following
steps:
To begin an exercise session using your USER key, refer
to Selecting a User Key.
1. At the Precor banner, press a USER key. A blinking line
prompts you to enter the first letter in your name.
2. Use the alphabet, on the number keypad, to enter your
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
3. Wait until the next cell blinks and continue the process
until your name or identification is complete.
Note: Blank spaces between letters are not allowed.
Owner’s Manual: User Identification
29
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Answer the prompts for weight, age, and gender.
Updating User Information on the EFX5.35
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt.
4. At the CLEAR [user name] STATISTICS? prompt,
choose one of the following options:
1 = No
2 = Yes
Pressing number 1 updates user
information only. The program
preferences and cumulative workout
statistics remain intact.
To update user information on the EFX5.35 such as weight
and age without clearing the workout statistics associated
with a USER key, take the following steps:
Pressing number 2 updates user
information, but deletes program
preferences and cumulative workout
statistics. Refer to Updating User
Information on the EFX5.31 or EFX5.33.
1. At the Precor banner, press and hold the USER key. A
welcome greeting scrolls across the display.
Continue holding the USER key until CHANGE USER
[user number]? USER [x] SETUP scrolls across the
display. Release the USER key, and then press OK.
2. When your user name appears, do not change it. Accept
it as is by pressing OK.
Important: If you change your user name, you also
delete all cumulative workout statistics associated with
the user name.
Owner’s Manual: User Identification
30
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Answer the prompts for weight and age.
Updating User Information on
the EFX5.31 or EFX5.33
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt.
4. Use the arrow keys to answer the gender prompt. When
you make your selection, the display resets to the Precor
banner.
To update user information on the EFX5.33 or EFX5.31,
such as weight and age associated with a USER key, take
the following steps:
1. At the Precor banner, press and hold the USER key. A
welcome greeting scrolls across the display.
Continue holding the USER key until CHANGE USER
[user number]? USER [x] SETUP scrolls across the
display. Release the USER key, and then press OK.
2. When your user name appears, do not change it. Accept
it as is by pressing OK.
Owner’s Manual: User Identification
31
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Use the alphabet, on the number keypad, to enter a new
name. To enter a letter, press the appropriate number key
repeatedly until the desired letter appears. To erase a
letter, press the CLEAR key.
Changing the User Name and Clearing
Workout Statistics
4. A blinking space or letter indicates it is ready to receive a
new letter. Wait until the next cell blinks and continue the
process until your name or user identification is complete.
Note: Blank spaces between letters are not allowed.
5. When you are satisfied with your name or user
identification, press OK.
You can clear the stored workout statistics for any USER key
by changing the name associated with a USER key.
Changing the user name resets any stored preferences,
such as weight and age, to the original factory defaults. On
the EFX5.35, the cumulative statistics are reset to zero and
the metrics displayed are reset to factory defaults.
6. The display then prompts you to enter your weight, age,
and gender.
Use the navigational arrow keys or number keys to
answer each prompt, and then press OK. With each
successful entry, you move onto the next prompt. After
you enter the gender type, the display indicates that the
user setup is complete and resets to the Precor banner.
1. At the Precor banner, press and hold the USER key while
the welcome greeting scrolls across the display.
Continue holding the USER key until
CHANGE USER [user number]?
scrolls across the display. Release the USER key, and
then press OK.
Note: Preferences and workout statistics are cleared and
all programs are restored to original default settings.
2. When your user name appears, a blinking line prompts
you to change the first letter.
Owner’s Manual: User Identification
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Workout Options
CAUTION: Before beginning any fitness program, see your
physician for a complete physical examination. Know your
physician-recommended heart rate target zone.
4. Select one of the following options:
Option...
Steps...
To start exercising
immediately
Use the QUICKSTART key.
Refer to Choosing
QUICKSTART.
Note: On the EFX5.35, determine whether you want
Total Body or Lower Body handlebars and lock the link
arms to the appropriate position. Refer to Converting
Handlebar Positions.
To view a list of
programs
Press a PROGRAMS key.
Refer to Selecting a Program.
1. Turn the unit On. The Precor banner scrolls across the
display.
To begin exercising Press your USER key.
using personal
preferences
Refer to Selecting a User Key.
2. Hold on to a stationary handrail while stepping on the
foot pedals.
3. Face the display. When you are comfortably situated,
begin pedaling.
Important: Before exercising, review the Important
Safety Instructions found at the beginning of this manual.
Owner’s Manual: Workout Options
33
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
Choosing QUICKSTART
3. Find a comfortable stride rate between 100 and 150
strides per minute.
To use the SmartRate feature, you need to specify your
age. In this case, review the steps found in Adding a User
or Selecting a Program.
QUICK
STA
Note: When you use the QUICKSTART key, you enter
the MANUAL program as a guest user. Workout statistics
and your preferences for weight, age, and gender are not
stored in memory. To save this type of information, refer to
Selecting a User Key.
1. While the Precor banner scrolls, start pedaling and press
QUICKSTART to begin the Manual Program.
QUICKSTART applies the following defaults:
Prompts
Program
Time
Default Value
Manual
30 minutes
150 lb (68 kg)
0
Weight
Age
Owner’s Manual: Workout Options
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The NO LIMIT option lets you work out indefinitely.
Since there is no time limit, an automatic cool-down
period is not appended to your program. Refer to
Cooling Down After a Workout.
Selecting a Program
HEART
3. Enter your weight (1—350) and then your age (1—99).
MANUAL
Note: To change a value (program, time, weight, or age)
that you have already entered press RESET to return to
the Precor banner. Select a program and reenter the
appropriate values.
INTERVAL
VARIETY
WEIGHT LOSS
PERFORMANCE
4. Hold onto a handrail. The ramp automatically changes to
the CrossRamp set for your program.
1. While the Precor banner scrolls, repeatedly press one of
the PROGRAMS menu keys to review its list of
Note: When you select a program without an identifying
USER key, you enter the program as a guest user.
Cumulative workout statistics and your preferences for
weight, age, and gender are not stored in memory. To
save this type of information, refer to Selecting a User
Key.
programs. Choose the program you want, and then press
OK. For a description of each program, refer to Programs
or review Table 2 with the PROGRAMS Keypad.
Note: After pressing a program menu key, you can also
scroll through the list of programs within that menu by
pressing the navigational arrow keys.
5. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
2. A workout time blinks in the center display if you choose
a time-based program. Enter a number between 1—240
minutes or zero (NO LIMIT) by using the navigational
arrow keys or the number keys, and then press OK.
6. Find a comfortable stride rate between 100 and 150
strides per minute.
Owner’s Manual: Workout Options
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press OK to select the program being displayed or
choose another program using the PROGRAMS keypad.
Refer to Selecting a Program for information about how
to choose a program.
Selecting a User Key
Important: If you make an entry error, press RESET to
return to the Precor banner.
3. The display prompts you for a workout time. To adjust the
time, use the number keypad or the navigational arrow
keys. To accept the number appearing on the display,
press OK.
To start your exercise session using personal identification
and preferences set up in Adding a User, take the following
steps:
4. Begin pedaling.
5. Use the CROSSRAMP and RESISTANCE arrow keys to
change the ramp incline and resistance.
1. At the Precor banner, press the same USER key you
designated in step 1, Adding a User.
6. Find a comfortable stride rate between 100 and 150
strides per minute.
Note: Refer to User Identification if you have not
previously chosen a USER key.
A welcome greeting scrolls across the display and the
last program associated with the USER key appears.
User preferences such as weight, age, and gender are
reinstated.
The time goal associated with the displayed program also
applies.
Owner’s Manual: Workout Options
36
Download from Www.Somanuals.com. All Manuals Search And Download.
To prematurely end the cool-down period, do the following:
1. Grasp a stationary handrail with one hand.
Cooling Down After a Workout
Incorporate a cool-down period into your workout to help
lower your heart rate and minimize muscle stiffness or
soreness.
2. Press RESET to view the workout summary.
3. Press RESET again to return to the Precor banner.
Note: You cannot switch to a different program or change
display options during the cool-down period. To alter the
cool-down period time limit, refer to Setting a Cool-Down
Time Limit.
Important: Hold on to a stationary handrail. Step off the
EFX when the lift has stopped moving.
When you complete a program with a time limit, you
automatically enter a cool-down period. The resistance is
reduced by 20%. To readjust the CrossRamp or resistance,
press the arrow keys. To lower your heart rate, reduce your
strides per minute.
A workout summary appears at the end of the cool-down
period. Refer to Ending a Workout.
Important: If you exit a program before completing it, the
cool-down period is bypassed.
Owner’s Manual: Workout Options
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Pausing During a Workout or the
Cool-Down Period
Stop pedaling to pause anytime during a workout or during a
cool-down period. The pause mode has a default time limit of
10 minutes. If you do not resume exercising during that time,
the display returns to the banner.
Ending a Workout
CAUTION: Hold on to a stationary handrail when you near the end
of your exercise session.
1. Slow your pedaling when you complete the cool-down period.
Use the Selection keys to display each workout statistic,
such as TOTAL CALORIES or VERTICAL GAIN. The
workout statistics include warm-up and cool-down
periods. After ten minutes, the display automatically
resets to the Precor banner.
Note: You can change the pause time limit by following the
instructions found in Changing EFX Settings.
1. To pause, stop pedaling.
A fitness score, associated with your fitness category,
appears when you take the Fitness Test.
The center display indicates the amount of time remaining
in pause mode.
A heart rate analysis also appears, if you held onto the
touch-sensitive handrail grips or wore a chest strap while
exercising. Refer to Heart Rate Analysis.
2. To resume exercising from pause mode, begin pedaling.
When you pause a program, you can change your program
selection. Refer to Changing Programs in Mid-session.
Note: On the EFX5.35, the workout summary provides
your cumulative workout statistics.
Note: While paused during the cool-down period, you
cannot change to another program.
2. To return to the Precor banner before the 10 minutes
elapse, press the RESET key.
3. Turn Off the EFX and lock the foot pedals in place with
the locking pin.
Important: Never leave children unsupervised around the
EFX. Always turn Off and unplug the EFX when it is not in
use. Lock the foot pedals in place with the locking pin.
Owner’s Manual: Workout Options
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs
This section describes the programs available on the EFX.
Use this section as a reference tool to better understand
each program’s purpose. For more information, refer to
Selecting a Program.
Changing Programs in Mid-session
You can change programs in the middle of a session by
selecting a new program from the PROGRAMS key menu.
All accumulated workout statistics are transferred to the new
program as you continue exercising.
The program descriptions are presented in menu selection
order. To see a list of programs, refer to PROGRAMS
Keypad and Table 2.
Certain programs, such as the Fitness Test, Basic HRC,
Fat Burner, and Aerobic Endurance, are not available for mid-
session transfers due to set goals and program preferences.
If this occurs, a message scrolls across the center display.
Choosing a Program
Choosing a program depends on your goals. If you are a
beginner or returning to regular exercise, you can start a
cardio-conditioning program to slowly return your body to a
comfortable level of exercise. If you have been exercising and
feel that you have an intermediate or advanced fitness level,
you probably have established goals. The Precor web site
workouts and advice from the experts.
Several exercise choices on the EFX are pre-programmed
with recommendations for CrossRamp, resistance and
alternating interval levels. You always have the option to
override the suggested levels with the exception of the Basic
HRC and Fitness Test.
Owner’s Manual: Programs
39
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
To pause during a program, stop pedaling. Refer to
Pausing During a Workout or the Cool-Down Period.
Program Tips
•
Begin at the Precor banner. Refer to Workout Options.
When you complete a program that contains a time or
calorie goal, the automatic cool-down period begins.
Refer to Cooling Down After a Workout.
•
A blinking column indicates your position as you progress
through a program.
•
•
To use the SmartRate feature, you need to specify your
age and wear a chest strap or hold on to the touch-
sensitive handrail grips. Refer to Using SmartRate.
•
•
Default time limits exist for the cool-down period and
pause mode. Refer to Changing EFX Settings if you wish
to adjust the settings.
To exercise indefinitely in any program (except preset
programs, such as the Fitness Test, Fat Burner, Weight
Loss, and Aerobic Endurance), an unlimited exercise time
setting may be an available option. Refer to Selecting a
Program.
Cumulative workout statistics appear when you end your
exercise session. Refer to Ending a Workout.
•
If your level of exertion becomes too great, reduce your
strides per minute and change the CrossRamp or
resistance settings using the arrow keys to override each
upcoming column in the program profile.
Owner’s Manual: Programs
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Program
Interval Program
MANUAL
INTERVAL
The Manual Program profile, available by pressing the
MANUAL key, begins as a flat line. You control CrossRamp
and resistance settings using the CROSSRAMP or
RESISTANCE arrow keys. The program profile reflects
changes in all subsequent columns. The blinking column
indicates your position in the program. A cool-down period
occurs automatically when you complete your specified time
goal.
The Interval Program, available by pressing the INTERVAL
key, is one of the best for conditioning your cardiovascular
system. The program raises and lowers your level of exertion
repeatedly for the specified period of time.
Initially, the rest interval is set to a CrossRamp of 4 and a
resistance of 1. The work interval is set at a CrossRamp of
10 and a resistance of 8. The display lets you know when the
preset levels are about to change and it indicates the levels
of the next interval.
Note: An exception to the cool-down period exists. Refer to
Advanced Programming and Troubleshooting for more
information.
While exercising, you can vary your strides per minute and
change the preset ramp incline and resistance settings using
the CROSSRAMP or RESISTANCE arrow keys. The
settings are repeated throughout the remainder of the
program. When you complete the program the CrossRamp
and resistance settings return to their standard defaults. No
settings, established during your exercise session, are
saved.
To use the SmartRate feature, you need to specify your age
during the setup prompts.
Owner’s Manual: Programs
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Aerobic Endurance Program
Hill Climb Program
VARIETY
VARIETY
The Aerobic Endurance Program can be accessed by
pressing the VARIETY key. The 30 to 60 minute program
has been designed by Dr. Emily Cooper of Seattle
muscular and aerobic endurance. It has a warmup period
followed by gradually increasing CrossRamp inclines and
resistance.
The Hill Climb Program, available by pressing the VARIETY
key, has preprogrammed CrossRamp settings in a fixed
pattern. It is designed to increase muscle tone, cardio-
conditioning, and endurance over several weeks.
The program consists of alternating forward and backward
pedaling movements that focus on working the thigh and calf
muscle groups. Display prompts appear indicating when to
reverse pedal direction at select intervals: 25%, 50%, and
75% of program completion.
During the warmup period, the display prompts you to
maintain a specific stride rate which increases muscle
flexibility and raises your heart rate. When the program
begins, maintain the recommended stride rate of 140 strides
per minute to improve cardiopulmonary conditioning and
muscular endurance. The ramp incline varies throughout the
program every three minutes. When you complete the
program, a 3-minute, cool-down period begins.
During your exercise session, you can change your strides
per minute and override the CrossRamp or resistance
settings using the arrow keys.
The CrossRamp and resistance are preset based on your
body weight and the recommended strides per minute, but
you have the option to adjust either one during the program
using the arrow keys. If you make adjustments, you may
change the effectiveness of the program.
Owner’s Manual: Programs
42
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Each program provides a 3-minute warm-up period.
During this time, you may change the CrossRamp or
resistance, but you cannot adjust the time or change to a
distance or calorie goal. At the end of the warm-up
period, the program automatically controls the resistance.
Pressing the RESISTANCE arrow keys has no affect.
Heart Rate Programs
HEART
RATE
The Basic HRC Program, available by pressing the HEART
RATE key, adjusts the CrossRamp to maintain your heart rate
within two beats per minute of the target heart rate while you
exercise. To use this program, you must enter your age and
wear a chest strap or grasp the touch-sensitive handrail
grips so your heart rate can be monitored throughout the
session.
Note: When your target heart rate is achieved or the
3-minute period elapses, the warm-up period ends and
the program begins.
•
The program sets the target heart rate as a percentage of
220 minus your age. Changing the target heart rate your
stride rate or CrossRamp affects the unit’s ability to
maintain your target heart rate in the preferred zone. It
takes time for the EFX to readjust the resistance so that
your heart rate remains on target. Check the SmartRate
and the HEART RATE displays to see if you are
maintaining your preferred zone and to determine your
actual heart rate. For information about understanding
your target heart rate, refer to Heart Rate Features.
Important: Consult your physician to determine the
appropriate target heart rate for your age and fitness level.
If your physician recommends a different target heart rate
than the one that appears on the display adjust it
accordingly. Do not exercise over the recommended range
of 85% of your maximum aerobic heart rate.
Heart Rate Program Tips
The Basic HRC Program enhances your overall
cardiovascular fitness level to help you achieve your weight
loss and fitness goals. Read through the following tips
before selecting a program. These tips provide general
information regarding how the program functions. For more
information and exercise suggestions, refer to the Precor
•
Changes to the CrossRamp are reflected in the
program’s profile. Automatic resistance changes appear
in the RESISTANCE display.
•
•
To change the program, select a different PROGRAMS
key and press OK.
A cool-down period is incorporated into the program.
Owner’s Manual: Programs
43
Download from Www.Somanuals.com. All Manuals Search And Download.
During the test, the EFX maintains the CrossRamp setting
at 4 and gradually increases the resistance in specific
stages. The display may request that you change your stride
rate.
Fitness Test Program
HEART
RATE
The keypads are disabled. The test ends if,
The Fitness Test, available by pressing the HEART RATE key,
is a test that consists of three 5-minute sessions. A warm-up
and cool-down period is incorporated into the program. The
actual duration of the test ranges between 5 and 23 minutes
depending on your fitness level. You cannot adjust the
CrossRamp or resistance settings.
•
•
You press RESET.
Two minutes has elapsed since the last heart rate signal
was received.
•
•
After warm up, if you surpass your target heart rate (74%
of your maximum aerobic heart rate).
The Fitness Test measures the maximum amount of oxygen
(V02 max) the body can use for energy production during
exercise. The higher the amount of oxygen that your body
can use enhances your ability to exercise for prolonged
periods of time. The test results can help you gauge the
effectiveness of your current exercise routine and tailor it to
meet your fitness goals.
You stop pedaling and the pause time limit elapses.
You must complete the test for it to determine your aerobic
capacity and establish your V02 max. Once you complete the
test, a fitness score and fitness level appear as part of the
workout summary. Use it to compare to Table 3 or Table 4.
Important: You must wear the chest strap or grasp both
touch-sensitive handrail grips throughout the Fitness Test.
If the heart rate reception is erratic, incorrect readings can
occur and terminate the test.
Owner’s Manual: Programs
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 3. Cardio respiratory Fitness Score Category—Females*
Fitness Test Tips
Read through the following tips before selecting the Fitness
Test.
Fitness Category
Low
Fitness
Medium
Fitness
High
Fitness
Age in Years
20–39
•
Sit and rest for at least five minutes prior to taking the
test.
28 (or below) 28–33
26 (or below) 26–31
24 (or below) 24–28
22 (or below) 22–26
33 (or above)
31 (or above)
28 (or above)
26 (or above)
•
•
You must enter your weight, age, and gender.
40–49
You can change to another program while in the midst of
taking the Fitness Test, but you will not receive a fitness
score.
50–59
60 and over
•
If you press the RESET key during the test, the test ends
and the display indicates whether the test was
completed.
* The test and analysis algorithm were developed by Dr. Emily Cooper
of Seattle Performance Medicine (www.spmedicine.com).
Table 4. Cardio respiratory Fitness Score Category—Males*
Important: If you need to stop the pedaling to regain
control or reduce your heart rate, please do so. You can
retake the fitness test later.
Fitness Category
Low
Fitness
Medium
Fitness
High
Fitness
Age in Years
20–39
Fitness Test Scores
35 (or below) 35–42
32 (or below) 32–39
29 (or below) 29–36
24 (or below) 24–31
42 (or above)
39 (or above)
36 (or above)
31 (or above)
The display prompts you to begin a cool down period when
you finish the Fitness Test. A fitness score and a fitness level
appear on the display as part of the workout summary and
relate to the tables shown below.
40–49
50–59
60 and over
* The test and analysis algorithm were developed by Dr. Emily Cooper
of Seattle Performance Medicine (www.spmedicine.com).
Note: A fitness score appears only if you complete at least
two stages of the test.
Owner’s Manual: Programs
45
Download from Www.Somanuals.com. All Manuals Search And Download.
The chart below briefly explains the purpose of each program.
Weight Loss Programs
Program
Description
WEIGHT LOSS
Fat Burner
This program has been designed by Dr. Emily
Cooper of Seattle Performance Medicine
results and increase endurance every time you
exercise. The program incorporates warm-up
and cool-down periods and allows you to select
a program time between 30 and 90 minutes.
Work and rest intervals appear along with
recommended stride rates. The faster pace
stride rates, combined with fairly low resistance
levels, provides optimal oxygenation to the
working muscles. The display prompts you
when you need to make changes in your stride
rate. To monitor your heart rate during the
program, use the touch-sensitive handrail grips
or wear a chest strap. Refer to Heart Rate
Features.
The Weight Loss Programs, available by pressing the
WEIGHT LOSS key, provide a variety of programs targeted
at lowering body fat while improving muscle tone and
conditioning.
Anytime during your exercise session you can use the
CROSSRAMP or RESISTANCE arrow keys to override
upcoming segments.
Weight Loss
Interval
Use this program if you are beginning or
returning to a regular fitness routine. The
workout time is fixed at 28 minutes and consists
of seven 4-minute intervals. You are not
prompted for a workout time.
Owner’s Manual: Programs
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Gluteal Program
CrossTrainer Program
PERFORMANCE
PERFORMANCE
The Gluteal Program, available by pressing the
PERFORMANCE key, is designed to exercise your gluteal
muscles. The CrossRamp is preprogrammed and display
prompts appear indicating when to reverse pedal direction at
select intervals: 25%, 50%, and 75% of program
completion.
The CrossTrainer Program, available by pressing the
PERFORMANCE key, has preprogrammed CrossRamp and
resistance settings.
The program consists of alternating forward and backward
pedaling movements that focus on working the thigh and calf
muscle groups. Display prompts appear indicating when to
reverse pedal direction at select intervals: 25%, 50%, and
75% of program completion.
During your workout, set a comfortable and consistent stride
rate. If needed, use the CROSSRAMP or RESISTANCE
arrow keys to override upcoming segments. Any adjustments
to the CrossRamp or resistance are applied to upcoming
segments. CrossRamp changes are reflected in the program
profile.
During your workout, set a comfortable stride rate. If needed,
use the CROSSRAMP or RESISTANCE arrow keys to
override upcoming segments. Any adjustments to the
CrossRamp or resistance are applied to upcoming
segments. CrossRamp changes are reflected in the program
profile.
To change the program, select a different PROGRAMS key
and press OK.
To change the program, select a different PROGRAMS key
and press OK.
Owner’s Manual: Programs
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special key presses. Read this section if you want to:
Advanced Programming Tips
•
Always start at the Precor banner.
•
•
•
Select the units of measure
•
The advanced programming and diagnostic mode is
accessed by pressing the RESET key at the Precor
banner. Any remaining key presses must occur quickly
and without pause.
Set the pause or cool-down times
Determine the setting for the CrossRamp auto-leveling
feature
•
•
The QUICKSTART key is disabled while in advanced
programming mode.
•
•
•
•
•
View the odometer
Display the number of hours you have used your EFX
View the software versions and part numbers
Check the usage log
The number keypad is disabled once you enter advanced
programming mode. You need to use the navigational
arrow keys to change the blinking prompts.
Check the error log
•
•
Some keys provide the same functionality and can be
used interchangeably while in advanced programming
mode. These keys are:
OK and ENTER
The advanced programming prompts appear sequentially
and in a menu format. Pressing the arrow keys in the
navigational keypad moves you through the programs.
Press OK to choose or accept the displayed selection. To
return to the Precor banner without saving any changes,
press RESET.
Owner’s Manual: Advanced Programming and Troubleshooting
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a U.S. Standard or Metric Display
Changing EFX Settings
Through a specific set of number key presses, you can
customize the pause or cool down times.
The EFX can display measurements in either metric or U.S.
standard. The default factory setting is set to display U.S.
standard. To change this setting, perform the following steps:
To access the menu and change the settings, perform the
following steps:
2. At the SELECT UNITS prompt, press OK. Use the
navigational arrow keys to select a unit of measure (either
METRIC or U.S.).
1. At the Precor banner, press the following keys in
sequence without pausing between selections:
3. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press RESET
to cancel any changes and return to the Precor banner.
RESET, 5, 6, 7, 1
Numbers appear on the display as you press the
associated key.
Setting a Pause Time Limit
DIAGS - SET PARAMETERS appears briefly, and then
SELECT UNITS scrolls across the display.
You can limit how long a user can pause while exercising on
the unit by entering a time between 1 and 10 minutes. For
example, if you set the pause time limit to 60 seconds, the
display automatically resets to the Precor banner if no key
press occurs within one minute.
4. At the SET MAX PAUSE TIME prompt, press OK. Use
the navigational arrow keys to change the time limit.
Choose between 1 and 10 minutes. The default time is
10 minutes.
5. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press RESET
to cancel any changes and return to the Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting a Cool-Down Time Limit
Setting the CrossRamp Auto-Reset Feature
You can limit how long a user cools down after exercising on
the unit by entering a time between 0 and 5 minutes.
The EFX has an auto-reset feature. The ramp resets to a
specific incline level when you begin your exercise session
and choose a program that has a different initial CrossRamp
setting then the previously used program.
Important: It is highly recommended that you set the cool-
down period at or above three minutes. It takes time for a
user’s heart rate to return to a resting state after vigorous
exercise. An effective cool-down period also reduces the
amount of lactic acid in muscle tissue.
8. At the SET CROSSRAMP prompt, press OK. Use the
navigational arrow keys to select the desired ramp incline
level between 1 and 20 on the EFX5.35 and between 1
and 14 on the EFX5.33 or EFX5.31.
6. At the SET COOL DOWN TIME prompt, press OK. Use
the navigational arrow keys to display the available time
limits. The default setting is 5 minutes.
9. When you are ready, press OK to accept the displayed
setting and return to the SELECT UNITS prompt. Or,
press RESET to cancel changes and return to the Precor
banner.
7. When you are ready, press OK to accept the displayed
setting and move to the next program. Or, press RESET
to cancel changes and return to the Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Odometer
Informational Displays
1. At the Precor banner, press the following keys in
sequence and without pause:
RESET, 6, 5
The EFX provides information about its use (odometer and
hour meter), as well as software version, usage log, and error
codes. In general, you would only access this information if
directed to do so by Precor Customer Support.
The numbers 6, 5 appear on the display as you press the
associated key.
These instructions guide you through all eight informational
displays. Pressing the OK key moves you through the
displays. Pressing the navigational arrow keys cycles you
through the menu selection. To exit, press RESET at any
time.
Then DIAGS - INFORMATION DISPLAY scrolls across
the display followed by ODOMETER.
2. Press OK to view the odometer value (cumulative strides
traveled) or press the ▼ arrow key to move to the next
informational display.
3. When you are ready, press OK to move to the next
display (hour meter).
Owner’s Manual: Advanced Programming and Troubleshooting
51
Download from Www.Somanuals.com. All Manuals Search And Download.
9. When you are ready, press OK to move to the next
display (lower board’s software part number).
Viewing the Hour Meter
HOUR METER scrolls across on the display.
LOWER SW scrolls across the display.
4. Press OK to view the number of hours that the unit has
been in use or press the ▼ arrow key to move to the next
informational display.
10.Press OK to view the lower board software version and
part number.
The EFX tracks the elapsed minutes, but the value that
appears is truncated to the nearest full hour.
11.When you are ready, press OK to move to the next
display (metrics board’s software part number).
5. When you are ready, press OK to move to the next
display (software version).
METRICS BOARD SW PART NUMBER scrolls across
the display.
12.Write the numbers below. You will need these numbers
if you call Customer Support with questions. This
information will help rule out any software-related
problems:
Viewing the Software Part Numbers
U-BOOT SW scrolls across the display.
6. Press OK to view the upper board boot software part
number (for example, 48996-100) or press the ▼ arrow
key to move to the next informational display.
UPPER BOOT SW: ___________________
UPPER BASE SW: ___________________
LOWER SW: ___________________
7. When you are ready, press OK to move to the next
display (upper base application software part number).
U-BASE SW scrolls across the display.
METRICS BOARD SW: ___________________
8. Press OK to view the upper base application software
part number or press the ▼ arrow key to move to the next
informational display.
13.When you are ready, press OK to move to the next
display (usage log).
Owner’s Manual: Advanced Programming and Troubleshooting
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the Usage Log
Viewing the Error Log
USAGE LOG scrolls across the display.
ERROR LOG scrolls across the display.
14.When you are ready, press OK to view each program, the
number of times it has been used, and the associated
cumulative minutes. The usage log is helpful in
17. When you are ready, press OK to determine how many
errors exist in the error log or press the ▼ arrow key to
cycle back to the ODOMETER display.
determining user preferences in program selection.
Note: If there are no errors in the log, you will see NO
ERRORS displayed. When you press OK, you return to
the ODOMETER display.
15.Use the navigational arrow keys to select and view usage
information about each specific program.
Note: For a list of programs, refer to PROGRAMS
18.Press OK again to view the first entry in the error log.
Keypad and Table 2.
19.To move through the error log, continue to press the ▼
arrow key. Each error code specifies when it occurred,
listing the error code, odometer, hour meter and current
(amps) values.
16.When you are ready, press OK to move to the next
display (error log).
Note: Use the ▲ arrow key to review prior error log
entries. To exit the error log, press OK while the code
scrolls across the display.
20.Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
Owner’s Manual: Advanced Programming and Troubleshooting
53
Download from Www.Somanuals.com. All Manuals Search And Download.
21.When you no longer need the information in the error log,
press QUICKSTART for at least four seconds to erase it.
The message, NO ERRORS, appears on the display and
remains static to let you know when the error log has
been cleared.
Troubleshooting Error Codes
If any error codes appear in the center display, turn the unit
Off and On. If the error continues to occur, call an authorized
service person for assistance. Refer to Obtaining Service.
If ERROR 30 appears on the display, you have an incorrect
RJ45 cable connection. Remove the cable and re-insert it
into the other receptacle on the back of the display console.
The correct receptacle has the tab opening at its base.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the EFX before clearing the error
log.
For example:
22.When you are ready, press OK to cycle back to the
ODOMETER, or press RESET to return to the Precor
banner.
Tab location
Owner’s Manual: Advanced Programming and Troubleshooting
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 5. Erratic heart rate readings
Troubleshooting Heart Rate
Table 5 may help you understand and troubleshoot erratic
heart rate readings.
What appears on
the display
Cause
What to Do
Nothing
The heart rate
receiver is not
installed or it has
been disconnected.
To receive Customer
Support, refer to
Obtaining Service.
Important: A heart rate can only be detected when the EFX
is turned On and you wear the chest strap or hold on to
both touch-sensitive handrail grips.
To conduct electrical impulses from a user’s heart, both
touch-sensitive handrail grips must be grasped firmly for five
to ten seconds. Usually, the concentration of salts in a
person’s perspiration provides enough conductivity to
transmit a signal to the receiver in the display console.
However, because of body chemistry or erratic heartbeats,
some people cannot use the heart rate feature. A chest strap
may provide better results. Refer to the QuickStart Card for
proper placement of the chest strap.
— — —
A signal is being
detected, but the
transmission requires your skin.
more time to establish
a heart rate.
Be sure the chest strap
is in direct contact with
Hr
A signal is being
detected, but the
transmission requires use both hands and
more time to establish make sure your hands
If using the touch-
sensitive handrail grips,
a heart rate.
are moist, not dry.
Pulsing HEART
The LED heart blinks If the LED is pulsating,
when a heart beat is it indicates that the
detected.
heart rate equipment is
working properly.
Owner’s Manual: Advanced Programming and Troubleshooting
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
It is important to perform the minor maintenance tasks
described in this section. Failure to maintain the EFX as
described here could void the Precor Limited Warranty.
Cleaning the Equipment
Most of the working mechanisms are protected inside the
covers. However, for efficient operation, the EFX relies on
foot pedals, handlebars, and covers must be as clean as
possible.
To reduce the risk of electrical shock,
DANGER
always unplug the unit from its power
source before cleaning it or
performing any maintenance tasks.
Precor recommends the EFX be cleaned before and after
each workout. Use mild soap and water; dampen a soft cloth
and wipe all exposed surfaces. This helps remove any dust
or dirt.
Inspection
Inspect the EFX before use.
CAUTION: Do not use any acidic cleaners. Doing so will
weaken the paint or powder coatings and void the Precor
Limited Warranty. Never pour water or spray liquids on any
part of the EFX. Allow the EFX to dry completely before
using.
Look and listen for slipping belts, loose fasteners, unusual
noises, worn or frayed power cords, and any other
indications that the equipment may be in need of service. If
you notice any of these, obtain service.
Frequently vacuum the floor around the unit to prevent the
accumulation of dust and dirt, which can affect the smooth
operation of the unit. Use a soft nylon scrub brush to clean
the foot pedals.
Important: If you determine that the EFX needs service,
make sure that the EFX cannot be used inadvertently. Turn
the unit Off, insert the locking pin and then unplug the
power cord from its power source. Make sure other users
know that the EFX needs service.
To order parts or to contact a Precor authorized service
provider in your area, refer to Obtaining Service.
Owner’s Manual: Maintenance
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing the Chest Strap
Store the chest strap in a place where it remains free of dust
and dirt such as, in a closet or drawer. Be sure to protect
the chest strap from extremes in temperature. Do not store it
in a place that may be exposed to temperatures below 32° F
(0° C).
To clean the chest strap, use a sponge or soft cloth
dampened in mild soap and water. Dry the surface
thoroughly with a clean towel.
Long-Term Storage
When the EFX is not in use for any length of time, turn it Off.
Make sure that the power cord is unplugged from its power
source and is positioned so that it will not become damaged
or interfere with people or other equipment.
Owner’s Manual: Maintenance
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor Residential Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND CONDITIONS
CAREFULLY BEFORE USING YOUR PRECOR INCORPORATED
PRODUCT. BY USING THE EQUIPMENT, YOU ARE
CONSENTING TO BE BOUND BY THE FOLLOWING
WARRANTY TERMS AND CONDITIONS.
Options / Accessories
Many options or accessories have components that are connected
internally or mounted inside the electronic console. The following
guidelines determine the warranty for these components. If the
internal components are installed by the factory or by an authorized
dealer as part of the original sale and delivery, they have a warranty
that is identical to the warranty of the equipment in which they are
connected or mounted. If the internal components are not installed
by the factory or by an authorized dealer as part of the original sale
and delivery, they have a 90-day parts and labor limited warranty. All
components that are not internally connected have 90-day parts
only limited warranty. Satisfactory proof of purchase is required in
all cases.
Limited Warranty
Precor Incorporated warrants all new Precor products to be free
from defects in materials and manufacture for the warranty period
set forth below. The warranty period commences on the invoice
date of original purchase. This warranty applies only against defects
discovered within the warranty period and extends only to the
original purchaser of the product. Parts repaired or replaced under
the terms of this warranty will be warranted for the remainder of the
original warranty period only. To make claim under warranty, the
buyer must notify Precor or their authorized Precor dealer within 30
days after the date of discovery of any nonconformity and make the
affected product available for inspection by Precor or its service
representative. Precor’s obligations under this warranty are limited
and set forth below.
Conditions and Restrictions
This warranty is valid only in accordance with the conditions set
forth below:
1. The warranty applies to the Precor product only while:
a. It remains in the possession of the original purchaser and
proof of purchase is demonstrated
b. It has not been subjected to accident, misuse, abuse,
improper service, or non-Precor modifications
c. Claims are made within the warranty period
Warranty Periods and Coverage
All residential products and commercial products used in the home
are warranted for the following periods:
2. This warranty does not cover damage or equipment failure
caused by electrical wiring not in compliance with electrical
codes or Precor owner’s manual specifications, or failure to
provide reasonable and necessary maintenance as outlined in
the owner’s manual.
•
•
•
•
Lifetime frame and welds
10 years parts and wear items
1 year labor
Coverage for options and accessories defined below.
Owner’s Manual: Precor Residential Equipment Limited Warranty
58
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECOR ALSO HEREBY DISCLAIMS AND EXCLUDES ALL OTHER
OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY
LAW OR OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE
OR DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A)
ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT,
WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR
OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND
(B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY FOR
LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer and
release shall apply even if the express warranty set forth above fails
of its essential purpose.
3. Warranty of all Precor products applies to residential use only
and is void when products are used in a nonresidential
environment or installed in a country other than where sold.
4. Except in Canada, Precor does not pay labor outside the United
States.
5. Warranties outside the United States and Canada may vary.
Please contact your local Dealer for details.
This limited warranty shall not apply to:
1. Software version upgrades
2. Cosmetic items, including, but not limited to the following: grips,
seats, and labels.
3. Repairs performed on Precor equipment missing a serial number
or with a serial tag that has been altered or defaced.
4. Service calls to correct installation of the equipment or instruct
owners on how to use the equipment.
5. Pickup, delivery, or freight charges involved with repairs.
6. Any labor costs incurred beyond the applicable labor warranty
period.
Exclusive Remedies
For any product described above that fails to conform to its
warranty, Precor will provide, at their option, one of the following:
(1) repair; (2) replacement; or (3) refund of the purchase price.
Precor Limited Warranty service may be obtained by contacting the
authorized dealer from whom you purchased the item. Precor
compensates Servicers for warranty trips within their normal service
area to repair equipment at the owner’s location. You may be
charged a trip charge outside the service area. THESE SHALL BE
THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY
BREACH OF WARRANTY.
Disclaimer and Release
The warranties provided herein are the exclusive warranties given
by Precor and supersede any prior, contrary or additional
representations, whether oral or written. ANY IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE THAT APPLY TO ANY PARTS
DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE PERIODS OF
EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE SAME PARTS.
PRECOR HEREBY DISCLAIMS AND EXCLUDES THOSE WARRANTIES
THEREAFTER. Some states do not allow limitation on how long an
implied warranty lasts, so the above limitation may not apply to you.
Owner’s Manual: Precor Residential Equipment Limited Warranty
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Exclusion of Consequential and Incidental
Damages
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR
LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING
WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED
NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR
DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF USE,
REVENUE OR PROFIT, COST OF CAPITAL, COST OF SUBSTITUTE
EQUIPMENT, ADDITIONAL COST INCURRED BY BUYER (BY WAY OF
CORRECTION OR OTHERWISE) OR ANY OTHER INCIDENTAL,
SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, WHETHER
RESULTING FROM NONDELIVERY OR FROM THE USE, MISUSE OR
INABILITY TO USE THE PRODUCT. This exclusion applies even if the
above warranty fails of its essential purpose and regardless of
whether such damages are sought for breach of warranty, breach of
contract, negligence, or strict liability in tort or under any other legal
theory. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation might
not apply.
This warranty gives you specific legal rights, and you may also have
other rights, which vary state to state.
Effective 01 January, 2003
P/N 36287-110
Owner’s Manual: Precor Residential Equipment Limited Warranty
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Owner’s Manual
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Owner’s Manual
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You and Welcome to Precor
To allow us to serve you better, please take a few moments to
complete and return your warranty registration.
YOU MAY ALSO REGISTER ONLINE AT
If you have questions or need additional information, contact your
local dealer or call Precor Customer Support at 800-347-4404.
Fold along dotted line and tape closed before mailing.
.
R E T
9 A 8 W 0 , 7 2 - 4 v 0 i l l 0 e 2 o o W d i n
x 7 2 0 2 P O B o
u e e N v n E
2 0 0 3 1 1 4 2 n d A
P r e c o r I n c o r
p o r a t e d
H E R E
A M S P T
C E P L A
Download from Www.Somanuals.com. All Manuals Search And Download.
TELL US ABOUT YOUR NEW PRECOR PRODUCT
Product
Serial
Number:
Date of
Purchase:
Month
Day
Year
The serial number is located on the shipping box and on the product.
Purchased
from:
Dealer Name
Please indicate the type of product purchased:
Elliptical Fitness CrossTrainerTM (EFX®)
Treadmill
❑
❑
❑
StretchTrainerTM
Cycle
Stair Climber
❑
❑
❑
Strength Training System
TELL US ABOUT YOU
❑ Mr.
❑ Mrs.
❑ Ms.
First Name
Street Address
City
Middle Initial
Last Name
Apt./Suite:
State
Zip Code
Area Code
Telephone
Your Email Address
Gender:
❑ Male
❑ Female ❑ Divorced
Marital status:
❑ Married
Age:
Annual household income:
❑ Under $50,000
❑ $51,000-75,000
❑ $76,000-100,000
❑ $101,000-150,000
❑ $151,000+
What are your fitness goals?
❑ Weight loss/management
❑ Muscle tone enhancement
❑ Cardiovascular improvement
❑ Overall health
❑ Increase energy and flexibility
❑ Stress reduction
❑ Rehabilitation
❑ Under 18
❑ 18-24
❑ 25-34
❑ 35-44
❑ 45-54
❑ 55-64
❑ 65+
❑ Widowed
❑ Never been married
❑ Other
TELL US ABOUT YOUR PURCHASE
Purchase (check all that apply):
❑ First Precor product
❑ Replaces a Precor product of the same type
❑ Replaces same type of product – different brand
❑ Addition to equipment currently owned
How did you FIRST become aware of Precor
products (choose only one):
❑ A gift
❑ Friend/relative
❑ Physician
❑ Fitness club
What factors MOST influenced your decision to
purchase your Precor product (choose up to three):
❑ Internet
❑ News report or product review
❑ Precor reputation
❑ Prior use of Precor product(s)
❑ Design/appearance
❑ Special product features
❑ Physician recommendation
❑ Rebate or sale price
❑ Quality/durability
❑ Warranty
❑ Magazine advertisement or article
❑ Print advertisement
❑ In-store display or demonstration
❑ Other
❑ Value for the price
Effective 28 June 2004
P/N 45623-102
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX5.35, EFX5.33, EFX5.31 Elliptical Fitness CrossTrainersTM
Electronic Readouts
Product Specifications
% Complete
Average Heart Rate*
Calories
CrossRamp
Heart Rate*
Maximum Heart Rate*
Profile
Strides per Minute
Target Heart Rate
Time
Time Elapsed
Time in Heart Rate Zone*
Time Remaining
Total Strides
EFX5.35
EFX5.33
EFX5.31
Length:
Width:
Height:
Weight:
Shipping weight:
Power:
CrossRamp®:
Incline Settings:
Resistance Levels
Frame:
84 in (213 cm)
31 in (79 cm)
63 in (159 cm)
240 lb (109 kg)
290 lb (123 kg)
120 VAC, 50/60Hz
15° – 40°
240 lb (109 kg)
290 (132 kg)
120 VAC, 50/60Hz
15° – 30°
1–20
1–20
210 lb (95 kg)
260 lb (118 kg)
120 VAC, 50/60Hz
15° – 30°
1–20
1–20
Resistance
SmartRate*
Units
Vertical Gain
1–20
1–20
* Use of chest strap or touch-sensitive handrail grips is required.
Powder-coated steel Powder-coated steel Powder-coated steel
Regulatory Approvals: FCC, ETL, CE
FCC, ETL, CE
FCC, ETL, CE
Product Features
Programs
CSAFE
QUICKSTART™
SmartRate®
Manual
Interval
Variety
Weight Loss
Fat Burner
Weight Loss
Aerobic Endurance Performance
Heart Rate Telemetry
(chest strap optional on the 5.31)
Hill Climb
Heart Rate
Gluteal
CrossTrainer
Touch Heart Rate
User Keys (2)
Basic HRC*
Fitness Test*
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartRate are registered trademarks of Precor
Incorporated. Crosstrainer, QuickStart, and StretchTrainer are trademarks of Precor Incorporated.
Copyright 2007 Precor Incorporated.
Specifications subject to change without notice.
NOTICE:
Precor is widely recognized for its innovative, award winning designs of exercise equipment.
Precor aggressively seeks U.S. and foreign patents for both the mechanical construction and the
visual aspects of its product design. Any party contemplating the use of Precor’s product designs
is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights
to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its
proprietary rights.
Precor Incorporated
20031 142nd Ave NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
1-800-347-4404
5.35/5.33/5.31 OM 34236-101, en
Warranty # 36287-110, en
Registration Card# 45623-102, en
31 July 2007
Download from Www.Somanuals.com. All Manuals Search And Download.
|