Assembly Guide
®
EFX 5.25
TM
Elliptical Fitness Crosstrainer
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for choosing Precor. For proper installation, please read this guide
thoroughly and follow the assembly instructions. If you do not assemble the EFX
according to these guidelines, you could void the Precor Limited Warranty.
Installation Requirements
Follow these installation requirements when assembling the unit:
•
Assemble the EFX in the location where you plan to use it. No rollers or
wheels exist on the EFX, so it is not easy to move once it is fully
assembled.
Obtaining Service
You should not attempt to service the EFX except for maintenance tasks
described in the owner’s manual. Should you need more information regarding
Customer Support numbers or a list of Precor authorized Service Centers, visit
•
Provide ample space around the unit.
Important: Consult your owner’s manual for proper placement of your
equipment.
•
Set up the unit on a solid, flat surface.
A smooth, flat surface under the unit helps keep it level. A level unit has fewer
malfunctions.
Unpacking the Equipment
The EFX is carefully tested and inspected before shipment. The unit is shipped in
one box. Ask for help to unpack and assemble the EFX. If any items are missing,
contact your dealer.
•
•
•
Open the box and assemble the components in the sequence presented
in this guide.
Obtain assistance.
Ask another capable adult for assistance during the assembly process.
Important: (240 volt 5.25 model only) If the power cord attached to your
equipment is not compatible with your local power plug standards, the container
should also include a power cord for your region. You will need to install this
cord in place of the one attached to the equipment. If you need such a cord and
it was not included with your EFX, please contact your Precor dealer for the
correct Precor power cord. For a list of authorized Precor dealers in your area,
Use your fingers or the appropriate tools to insert fasteners.
Proper alignment helps alleviate cross-threading. Do not fully tighten
fasteners until instructed to do so.
When fully tightening, the head of the fastener should be flush with the
product. If it is not, cross-threading has occurred. Do not attempt to rework
the assembly as more damage to the equipment will occur. Contact
Customer Support. Refer to Obtaining Service.
Required Tools
•
Wire cutter
•
Rubber mallet
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware Kit
Fasteners
Quantity
Fasteners
Quantity
(A) Hex head screw (M8 x 20 mm)
(B) Flat washer (M8)
8
(H) Flat washer (M8)
4
8
(J) Locknut (M8)
2
3
(K) Phillips-head screw (M5 x 16 mm)
(C) Buttonhead screw (M8 x 12 mm)
(D) Lock washer (M8)
6
6
2 —
Handlebar
caps (L)
1 — Double-ended box wrench (N)
1 — Hex key (P)
1 — Power cord
(E) Buttonhead (M10 x 20 mm)
2
2 - Moveable arm cuffs (each cuff is
two pieces) (M)
(F) Flat washer (M10)
2
2
(G) Buttonhead screw (M5 x 50 mm)
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Steps
Important: Read the Installation Requirements before assembling
the EFX.
Ask your assistant to hold the right stabilizer, which has the cable
protruding from both ends, next to the base frame. Connect the
base cable. An audible click is heard when the cable is properly
attached. Place excess cable into the base frame.
Secure the stabilizer to the base frame using four hex head screws
(A) and four washers (B). Partially tighten.
Note: For easier access to the base mounts, lift the front of the
EFX off the floor and place a wedge of packaging beneath its base.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Cut any wire ties that secure the cable to the stabilizer. Unwrap the
cable and remove any kinks. Feed the cable through the console
bracket as shown in the illustration.
Slide the console bracket into the right stabilizer and align the
three mounting holes. Insert the top two buttonhead screws (C)
with lock washers (D). Partially tighten.
CAUTION: Make sure you do not pinch the cables while attaching
the console bracket. Any damage caused during installation is
not covered by the Precor Limited Warranty.
Insert the bottom buttonhead screw (C) with lock washer (D).
Partially tighten.
Slide the left stabilizer onto the console bracket and secure its
base using four hex head screws (A) and four washers (B). Partially
tighten.
Note: You may need to pivot the stabilizer back and forth to fit it
snugly onto the console bracket.
Return to the console bracket and insert the three remaining
fasteners. Fully tighten all six console bracket fasteners.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach the right moving handlebar. Slide the handlebar pivot joint
onto the stabilizer axle (use a rubber mallet if needed).
Secure the handlebar using one hex head screw (E) and one
washer (F). Fully tighten. Snap the moveable arm cuff (M) into
place and then place a handlebar cap (L) onto the connection.
CAUTION: Guide the handlebar to its balance point and let it rest
there. When attaching the lower link arms, have your assistant
hold the moving handlebar for safety. Failure to do so could
result in injury.
Remove the locking pin so you can move the foot pedals to a
convenient location to attach the moving handlebars. Store the
locking pin underneath the ramp.
Attach the handlebar to the lower link arm using one buttonhead
screw (G), two washers (H), and one locknut (J). Fully tighten.
Repeat steps 8, 9, and 10 to secure the left handlebar.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect the 4-pin connector and the RJ45 to the appropriate
receptacles on the back of the display console. An audible click is
heard when the cable is properly attached.
Place the excess cable into the console bracket.
Connect the green grounding wire to the middle receptacle
marked GND.
Attach the display console to the console bracket using three
Phillips-head screws (K). Tighten securely.
Return to the base of the stabilizers and fully tighten all eight hex
head screws.
If necessary, remove the wedge of packing material used in step 2.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before exercising, make sure the EFX is level and does not wobble
from side to side.
Connect the power cord.
CAUTION: Use the supplied power cord. Do not remove or otherwise
bypass the 3-prong plug with an adapter in order to use a non-
grounded outlet. Do not plug the EFX into a power transformer in
an attempt to adjust the voltage requirements. Failure to follow
these instructions might damage the unit and will void the Precor
Limited Warranty. If an appropriate cord for your location was not
included with your EFX, please contact your Precor dealer for the
proper Precor power cord. For more information on authorized
Precor dealers in your area, please contact Customer Support at
Important: If the EFX is placed on a slightly uneven surface, turning
the leveling pads can help, but will not compensate for extremely
uneven surfaces.
1. Kneel by the side of the stabilizer and lift the base slightly so you
can access the levelers.
2. Rotate the levelers as needed.
1. Insert the power plug connector into its receptacle at the rear of
the unit.
3. When the EFX is level, fully tighten the lock nut and lower the EFX
to the floor.
2. Plug the other end into a grounded outlet so you can maintain a
consistent power source without overloading any other circuitry.
Be sure to use the appropriate voltage. Refer to Grounding
Instructions in the owner’s manual.
Turn the unit On.
Use the power switch to turn the unit On. Check that the Precor
banner appears on the display. If the display remains blank, cycle the
power. If the display continues to remain blank, check the cable
connections.
Important: Make sure the locking pin is removed and stored before
you begin exercising.
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
EFX5.25 Elliptical Fitness CrossTrainer Assembly Guide
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
©2011 Precor Incorporated
EFX 5.25 AG 300086-241, en
15 September 2011
Woodinville, WA USA 98072-4002
1-800-347-4404
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICKSTART™
CAUTION: Before using the EFX, read all these
instructions. Failure to do so may result in serious injury.
Begin Your Workout with QUICKSTART
To begin exercising immediately without personalizing your exercise
session, take the following steps.
• Do not allow children or those unfamiliar with its
operation, on or near this equipment.
• Before beginning any fitness program, see your
physician for a thorough physical examination.
Seek advice from your physician to learn the
target heart rate appropriate for your
fitness level.
1. Turn On the EFX using the power switch located at the rear of the
unit, near the power cord.
2. Remove the locking pin that secures the roller arm.
3. Hold on to the stationary handrail and step on the foot pedals.
• Always face the display and use the
stationary handrail for balance. Never
attempt to turn around on the EFX.
• If you feel pain, faintness, or dizziness,
stop exercising immediately.
4. Begin pedaling. Maintain a comfortable stride rate between 100
and 150 strides per minute depending on your level of fitness.
®
Important: Do not use the Total Body feature until you are
comfortable with the movement of the EFX 5.25.
EFX 5.25
5. Press QUICKSTART and the Manual Program begins. An exercise
session goal of 30 minutes appears in the TIME display and
counts down.
USER keys
Pick one of the USER keys to store
workout preferences. The next time
you exercise, press the appropriate
USER key when the Precor banner
appears. Your workout preferences
are immediately restored. Press
QUICKSTART to begin using the
displayed program.
Note: To select a different program or choose a USER key, refer
to your owner’s manual.
6. To increase or decrease the ramp incline or resistance, use the
CROSSRAMP or RESISTANCE arrow keys.
Workout Tips
7. When you reach the time goal, you automatically enter a
cool-down period. After you complete the cool-down period, the
equipment displays a summary of your exercise session statistics.
If you used the touch-sensitive grips during your workout, your
average heart rate appears in the display as well.
• Before and after an exercise session, gently
stretch your lower body and back to help prevent
stiffness or soreness.
The Locking Pin on the
Roller Arm
• At the beginning of an exercise session, take
several minutes to bring your heart rate into your
target zone (shown in Diagram A on the other side
of this card).
The locking pin on the EFX
ramp secures the roller arm
from use. To prevent
unauthorized use, secure the
roller arm with the locking pin
after every workout.
8. Stop pedaling and hold on to the stationary handrail while you
carefully step down from the EFX.
9. To prevent unauthorized use, turn Off the EFX and secure the
roller arm with the locking pin.
• To display your heart rate, use both hands to grasp
the touch-sensitive grips.
Pull firmly on the pin to slide it
out of the roller arm. A lanyard
attaches the locking pin to
Note: To personalize your exercise experience, refer to Workout
Options in your owner’s manual.
•
To pause during your workout, stop pedaling. The
pause mode has a 10-minute time limit.
the ramp. Store the locking pin
underneath the ramp once it
is removed from the roller arm.
• Incorporate a cool-down period into your exercise
session to help lower your heart rate and minimize
muscle stiffness and soreness.
5.25 QSC 300089-141, 23 July 2011 en
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
As you work out, your perspiration will help transmit
your heart rate signal. If you have difficulty using the
handheld grips to determine your heart rate, try the
sensors again later in the workout to see if you can
obtain a heart rate signal.
Wearing a chest strap transmitter during your workout
provides steady heart rate information. For the equipment
to detect your heart rate, you must grip the touch heart
rate sensors or wear a chest strap transmitter while
exercising. In the presence of both touch and wireless
data, the touch data takes precedence and will display.
Choosing a Program
•
Determine your level of fitness: beginner, intermediate,
or advanced.
•
Determine your immediate goal: endurance training,
cardio-conditioning, or weight loss.
If the touch heart rate feature does not work for you,
Precor recommends that you use a chest transmitter
strap.
If you are a beginner, start a cardio-conditioning program
to slowly adjust your body to a comfortable level of
exercise. Over a recommended 8-week period, you will
increase your endurance and strength while improving
flexibility.
Note: To receive an accurate reading, the strap needs to
be in direct contact with the skin on the lower sternum
(just below the bust line for women).
CAUTION: Your heart rate should never exceed 85%
of your maximum aerobic heart rate. Your
maximum heart rate is equal to 220 minus your age.
(Diagram A).
To use a chest strap:
1. Carefully dampen the back of the strap with tap water.
For all fitness levels, plan to exercise at a comfortable
pace for 20 to 30 minutes a day. To monitor your heart
rate, use the touch-sensitive grips. Supplement your plans
with fitness workouts from the Precor web site
(www.precor.com).
Important: Do not use deionized water. It does not
have the proper minerals and salts to conduct
electrical impulses.
Heart Rate Target Zones
200
190
180
2. Adjust the strap and fasten it around your chest. The
strap should feel snug, not restrictive.
Using the Touch Heart Rate Feature
170
High
3. Make sure that the chest strap is right side up, lies
horizontally across, and is centered in the middle of
your chest.
160
150
140
130
Note: Touch heart rate performance may vary based on a
user’s physiology, fitness level, age, and other factors. You
may experience an erratic readout if your hands are dry,
dirty, or oily, or if the skin on your palms is especially thick.
Wearing hand lotion can also cause an erratic readout. In
addition, make sure that the sensors are clean to ensure
proper contact can be maintained.
4. Test the chest strap placement by checking the heart
rate function on the equipment. If a heart rate is
registering, your chest strap placement is correct. If
the equipment does not register a heart rate, readjust
the strap and recheck the heart rate function.
Peak
120
Cardio
110
100
Fatburn
90
80
Warmup
To use the touch heart rate feature, place the palm of your
hands directly on the metal heart rate sensors on the
equipment’s handlebars. To ensure a more accurate heart
rate readout, make sure you follow these tips:
70
20 25 30 35 40 45 50 55 60 65 70 75
Your Age
Diagram A
•
•
•
Both hands must grip the sensors for your heart rate to
register.
Using a Chest Strap Transmitter
It takes a number of consecutive heart beats
(15-20 seconds) for your heart rate to register.
Signals used by the Chest Strap
When gripping the sensors, do not grip tightly. Keep a
loose, cupping hold. Holding the grips tightly can
affect the reading.
WARNING
Transmitter (or heart rate strap)
may interfere with pacemakers or
other implanted devices. Consult
your physician and the
manufacturers of your Chest Strap
Transmitter and implanted device
before using a Chest Strap
Transmitter.
Precor Incorporated
20031 142nd Avenue NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
5.2x HR INFO 300090-141
©2011 Precor Incorporated
Download from Www.Somanuals.com. All Manuals Search And Download.
®
EFX 5.25
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Read the following precautions thoroughly before you
begin assembly, and save them afterward for future
reference.
•
Make sure all users see a physician for a complete
physical examination before they begin any fitness
program.
•
Il est conseillé de subir un examen médical complet
avant d'entreprendre tout programme d'exercise. Si
vous avez des étourdissements ou des faiblesses,
arrêtez les exercices immédiatement.
Do not allow children, or people unfamiliar with the
operation of this equipment, on or near it. Do not leave
children unsupervised around the equipment.
Important: (240 volt 5.25 model only) If the power cord
attached to your equipment is not compatible with your
local power plug standards, the container should also
include a power cord for your region. You will need to
install this cord in place of the one attached to the
equipment. If you need such a cord and it was not
included with your EFX, please contact your Precor
dealer for the correct Precor power cord. For a list of
authorized Precor dealers in your area, please contact
•
•
Make sure all users wear proper exercise clothing and
shoes for their workouts and avoid loose or dangling
clothing. Users should not wear shoes with heels or
leather soles, and they should check the soles of their
shoes to remove any dirt and embedded stones. They
should also tie long hair back.
Safety Precautions
Always follow basic safety precautions when using the
EFX to reduce the chance of injury, fire, or damage. Other
sections in this manual provide more details of safety
features. Be sure to read these sections and observe all
safety notices. These precautions include the following:
•
•
Never leave the equipment unattended when it is
plugged in. Unplug the equipment from its power
source when it is not in use, before cleaning it, and
before providing authorized service.
Note: The optional power adapter is considered a
power source for self-powered equipment.
•
Read all instructions in this guide before installing and
using the equipment and follow any labels on the
equipment.
Use the power adapter provided with the equipment.
Plug the power adapter into an appropriate, grounded
power outlet as marked on the equipment.
Owner’s Manual: Important Safety Instructions
1
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Care should be taken when mounting or dismounting
the equipment.
•
Keep equipment away from water and moisture. Avoid
dropping anything on or spilling anything inside the
equipment to prevent electric shock or damage to the
electronics.
Read, understand, and test the emergency stop
procedures before use.
•
•
Do not operate electrically powered equipment in
damp or wet locations.
Keep the power cord or optional power adapter and
plug away from heated surfaces.
Never operate this equipment if it has a damaged cord
or plug, if it is not working properly, or if it has been
dropped, damaged, or exposed to water. Call for
service immediately if any of these conditions exist.
Route power cables so that they are not walked on,
pinched, or damaged by items placed upon or against
them, including the equipment itself.
•
Ensure the equipment has adequate ventilation. Do not
place anything on top of or over the equipment. Do not
use on a cushioned surface that could block the
ventilation opening.
•
Maintain the equipment to keep it in good working
condition, as described in the Maintenance section of
the assembly and maintenance guide. Inspect the
equipment for incorrect, worn, or loose components,
and then correct, replace or tighten prior to use.
•
•
Assemble and operate the equipment on a solid, level
surface.
•
•
If you plan to move the equipment, obtain help and use
proper lifting techniques. Refer to the "Moving the
Equipment" section of the assembly and maintenance
guide.
Proper Location for Equipment
• For all equipment other than treadmills: Locate at
least 40 inches (1 meter) away from walls or furniture
on either side of the equipment, and 40 inches (1
meter) away from objects behind the equipment.
Use the equipment only for its intended purpose as
described in this manual. Do not use accessory
attachments that are not recommended by Precor.
Such attachments may cause injuries.
• For treadmills: Locate at least 40 inches (1 meter)
away from walls or furniture on either side of the
treadmill, and at least 80 inches (2 meters) away
from objects behind the treadmill.
•
•
Do not operate the equipment where aerosol (spray)
products are being used or where oxygen is being
administered.
• Equipment Weight Restriction: Do not use the EFX if
you weigh more than 350 pounds (160 kg).
Do not use outdoors.
Owner’s Manual: Important Safety Instructions
2
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Do not attempt to service the equipment yourself,
except to follow the maintenance instructions in this
manual.
included with your EFX, please contact your Precor
dealer for the correct Precor power cord. For a list of
authorized Precor dealers in your area, please contact
•
•
Never drop or insert objects into any opening. Keep
hands away from moving parts.
The EFX must be grounded. If the unit malfunctions or
breaks down, grounding provides a path of least
Do not set anything on the stationary handrails,
handlebars, control console, or covers. Place liquids,
magazines, and books in the appropriate receptacles.
resistance for electric current, which reduces the risk of
electrical shock. The unit is equipped with a power cord
having an equipment-grounding conductor and a
grounding plug. The plug must be inserted into an outlet
that is properly installed and grounded in accordance with
all local codes and ordinances. Failure to properly ground
the EFX could void the Precor Limited Warranty.
•
Do not lean on or pull on the console at any time.
CAUTION: DO NOT remove the cover, or you may risk
injury due to electric shock. Read the assembly and
maintenance guide before operating. There are no
user-serviceable parts inside. Contact Customer
Support if the equipment needs servicing. For use
with single phase AC supply only.
Improper connection of the
equipment-grounding conductor can
DANGER
result in a risk of electric shock. Check
with a qualified electrician or service
person if you are in doubt as to
whether the unit is properly grounded.
Do not modify the plug provided with
the EFX. If it does not fit the outlet,
have a proper outlet installed by a
qualified electrician.
Grounding Instructions
Important: (240 volt 5.25 model only) If the power cord
attached to your equipment is not compatible with your
local power plug standards, the container should also
include a power cord for your region. You will need to
install this cord in place of the one attached to the
equipment. If you need such a cord and it was not
Owner’s Manual: Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hazardous Materials and Proper
Disposal
The batteries within self-powered equipment contain
materials that are considered hazardous to the
environment.
Product Recycling and Disposal
This equipment must be recycled or discarded according
to applicable local and national regulations.
Product labels, in accordance with European Directive
2002/96/EC concerning waste electrical and electronic
equipment (WEEE), determine the framework for the
return and recycling of used equipment as applicable
throughout the European Union. The WEEE label
indicates that the product is not to be thrown away, but
rather reclaimed upon end of life per this Directive.
Federal law requires proper disposal of these batteries. If
you plan to dispose of your equipment, contact Precor
Commercial Products Customer Support for information
regarding battery removal. Refer to Obtaining Service.
In accordance with the European WEEE Directive,
electrical and electronic equipment (EEE) is to be
collected separately and to be reused, recycled, or
recovered at end of life. Users of EEE with the WEEE
label per Annex IV of the WEEE Directive must not
dispose of end of life EEE as unsorted municipal waste,
but use the collection framework available to customers
for the return, recycling, and recovery of WEEE.
Customer participation is important to minimize any
potential effects of EEE on the environment and human
health due to the potential presence of hazardous
substances in EEE. For proper collection and treatment,
refer to Obtaining Service.
Owner’s Manual: Important Safety Instructions
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Frequency Interference (RFI)
Regulatory Notices for Cardiovascular
Exercise Equipment
The regulatory information in this section applies to the
exercise equipment and its control console.
Federal Communications Commission, Part 15
The EFX has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. The EFX generates, uses, and can
radiate radio frequency energy and, if not installed and
used in accordance with the owner’s manual instructions,
may cause harmful interference to radio communications.
Safety Approvals for Cardiovascular
Equipment
Precor equipment has been tested and found to comply
with the following applicable safety standards.
Cardiovascular Type Equipment:
Per FCC rules, changes or
WARNING
•
CAN/CSA, IEC, EN 60335-1 (Household and similar
electrical appliances - Safety)
modifications not expressly
approved by Precor could void the
user’s authority to operate the
equipment.
•
EN 957 (Stationary training equipment, class H/B
compliant equipment)
Owner’s Manual: Important Safety Instructions
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Department of Communications
Electrical Recommendations: 120 V and 240 V
Elliptical Fitness Crosstrainers
This digital apparatus does not exceed the Class B limits
for radio noise emissions from digital apparatus set out in
the Radio Interference Regulations of the Canadian
Department of Communications.
Note: This is a recommendation only. NEC (National
Electric Code) guidelines or local region electric codes
must be followed.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de la class B prescrites dans le
Réglement sur le brouillage radioélectrique édicté par le
ministére des Communications du Canada.
CAUTION: Use the supplied and appropriate power
cord. Do not remove or otherwise bypass the 3-prong
plug with an adapter in order to use a non-grounded
outlet. Do not plug the EFX into a power transformer in
an attempt to adjust the voltage requirements. Failure
to follow these instructions might damage the unit and
will void the Precor Limited Warranty. If an appropriate
cord for your location was not included with your EFX,
please contact your Precor dealer for the proper Precor
power cord. For more information on authorized
Precor dealers in your area, please contact Customer
ATTENTION: Haute Tension
Débranchez avant de réparer
European Applications
CE compliance is claimed to the following directives:
•
•
•
2004/108/EC EMC Directive
2006/95/EC LVD Directive
2002/95/EC RoHS Directive
You should have received a power cable that meets your
local electrical code requirements along with the
equipment. Elliptical Fitness Crosstrainers may be
connected to branch circuits with other devices within the
circuit limits. If you need additional help with the power
connections contact your Precor authorized dealer.
Directive compliance has been verified to the following
standards:
•
•
•
EN 55022
EN 55024
EN 60335-1
Owner’s Manual: Important Safety Instructions
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Obtaining Service
You should not attempt to service the EFX except for
maintenance tasks as described in this manual. The EFX
does not contain any user-serviceable parts that require
lubrication. For information about product operation or
For future reference, write the model, serial number, and
date of purchase for your unit in the space provided. The
serial number is printed on a label located beneath the
power receptacle (Figure 1).
Model #: _______ Serial #: ______________________
Date purchased: _________________________
50/60 Hz, 1.7A, 200W
5.23 / 5.25
ELLIPTICAL TRAINERS
Figure 1: Location of serial number
Owner’s Manual: Important Safety Instructions
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Pausing During a Workout or the
Regulatory Notices for Cardiovascular
Cool-Down Period ....................................................................27
Exercise Equipment ....................................................................5
Keys ............................................................................................ 19
Owner’s Manual: Table of Contents
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Owner’s Manual: Table of Contents
9
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX Features
The EFX is equipped with features designed to help you
meet your fitness goals. These features include:
•
•
•
•
•
Stationary handgrips with heart rate feature
Moving handlebars
Preset programs
Comprehensive resistance settings
Automatic crossramp
The Locking Pin
CAUTION: Always use the locking pin to secure the
foot pedals when the EFX is not in use.
Figure 2: Remove locking pin before exercising
The locking pin secures the foot pedals to keep them from
traveling up or down the ramp. Before beginning your
exercise session, pull firmly on the pin to slide it out of the
roller arm. Refer to Figure 2. A lanyard attaches the locking
pin under the ramp.
Store the locking pin underneath the ramp once it is
removed from the roller arm. Refer to Figure 3. After
exercising, use the locking pin to secure the foot pedals.
Figure 3: Store the locking pin under the ramp
Owner’s Manual: EFX Features
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Stationary Handrail
To maintain your balance, always grasp a stationary
handrail when you step on or off the foot pedals, and when
you use the keypad.
Location
It is important to keep a minimum distance of one foot (30
cm) around the EFX open and free from obstacles such as
other equipment.
CAUTION: The EFX is not equipped with wheels and
should be assembled in the location where you plan to
use it. If you need to move the EFX, use the locking pin
to secure the foot pedals, obtain help, and use proper
lifting techniques.
To learn more about the touch-sensitive grips on the EFX,
Turning the Unit On and Off
To turn the unit on and off, use the power switch located at
the rear of the unit, near the power cord receptacle. Refer
to Figure 4.
Important: Turn the unit off when it is not being used.
50/60 Hz, 1.7A, 200W
5.23 / 5.25
ELLIPTICAL TRAINERS
Figure 4: Power switch
Owner’s Manual: EFX Features
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Features
Note: Handheld heart rate performance may vary based on
a user’s physiology, fitness level, age, and other factors.
You may experience an erratic readout if your hands are
dry, dirty, or oily, or if the skin on your palms is especially
thick. Wearing hand lotion can also cause an erratic
readout.
Important Safety Instructions
Read the following before using the heart rate or
SmartRate features.
•
•
Consult your physician before engaging in any vigorous
exercise. Do not use the heart rate programs until
authorized by your physician.
To use the handheld heart rate feature place the palm of
your hands directly on the touch-sensitive heart rate
sensors on the equipment’s handlebars. To ensure a more
accurate heart rate readout, make sure you follow these
tips.
Know your heart rate and your physician-recommended
heart rate target zone.
Using the Heart Rate Grips
•
It takes a number of consecutive heartbeats (15-20
seconds) for your heart rate to register.
Note: While exercising, you must grasp both touch-
sensitive grips for a minimum of five to ten seconds to
transmit your heart rate to the display.
•
When gripping the sensors, do not grip tightly. Keep a
loose, cupping hold. Holding the grips tightly can make
it difficult to read your heart rate.
•
•
Make sure that the sensors are clean to ensure proper
contact can be maintained.
As you work out, your perspiration will help in
transmitting your heart rate signal. If you are having
difficulty using the handheld grips to determine your
heart rate, try the sensors again later in your workout to
see if you can get a heart rate signal.
Figure 5: Touch-sensitive heart rate grips
Owner’s Manual: Heart Rate Features
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: If the touch-sensitive heart rate sensors do not work
for you, then we recommend that you use a chest transmitter
strap. A chest strap is not included with this model.
Exercising to Your Target Heart Rate
CAUTION: Before beginning any fitness program, see
your physician for a thorough physical examination.
Seek advice from your physician to learn the target heart
rate appropriate for your fitness level. Your heart rate
should never exceed 85% of your maximum aerobic
heart rate. If it does, immediately slow down and adjust
the ramp incline or resistance to return to your physical
recommended target zone.
Heart Rate Target Zones
200
190
180
The HEART RATE display shows your heart rate while
exercising. To view your heart rate (beats per minute) on the
display, grasp both touch-sensitive grips.
High
170
160
150
140
130
To test your current heart rate:
•
To use the touch-sensitive grips on the EFX, grasp both
grips and wait five to ten seconds.
Peak
120
Cardio
110
•
If Hr appears in the HEART RATE display, the EFX is not
detecting a signal, or has not yet determined your heart
rate.
100
90
Fat Burn
80
Warmup
Note: When a signal is detected, the heart rate icon
flashes and a number appears in the HEART RATE display
that indicates your heart rate.
70
20 25 30 35 40 45 50 55 60 65 70 75
Your Age
Figure 6: Heart rate target zones
•
Always face forward on the EFX and use the stationary
handrail for balance. Keep upper body movement to a
minimum.
Owner’s Manual: Heart Rate Features
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using SmartRate®
The SmartRate feature helps you monitor and maintain
your heart rate in the target zone best suited to your
specific needs.
Table 1. Heart rate target zones and SmartRate Segments
Heart Rate Zone
Percent
Segment
Blinking
Label
Above 87
85 to 87
80 to 84
75 to 79
70 to 74
65 to 69
60 to 64
55 to 59
50 to 54
Below 50
Tenth
Ninth
Eighth
Seventh
Sixth
HIGH
PEAK
When the EFX detects a heart rate, a single bar blinks and
indicates your current heart rate zone. All 10 bars may
appear during an exercise session.
CARDIO
CARDIO
CARDIO
FATBURN
FATBURN
FATBURN
WARMUP
WARMUP
Important: To use the SmartRate feature, you must
choose a program and enter your age during the setup
phase of your exercise session.
Fifth
Fourth
Third
Table 1 shows the percents used in calculating the heart
rate target zones. While your heart rate remains within
these zones, the corresponding bar blinks and provides a
visual cue.
Second
First
The SmartRate indicator bars do not appear when:
The calculation used to determine your maximum aerobic
heart rate is (220 minus your age). When you multiply it by
the percent indicated in Table 1, you can understand the
relationship between the blinking bar and your target heart
rate.
•
•
You press QUICKSTART at the Precor banner.
You do not to grasp both touch-sensitive grips on the
EFX for five to ten seconds.
Note: If you do not enter yourage when prompted, a
default age of 35 years is used for heart rate
calculations.
CAUTION: Your heart rate should never exceed 85% of
your maximum aerobic heart rate. If it does,
immediately slow down and adjust the ramp incline or
resistance to return to your physical recommended
target zone.
Owner’s Manual: Heart Rate Features
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Console
HEART RATE display: Grasp both
touch-sensitive grips to display and
monitor your pulse.
User 1—2: Press a USER key at the
Precor banner to personalize your
exercise experience. The information is
stored for future exercise sessions.
Center display: Initially shows the
Precor banner. It changes to the
program profile when you select a
program or press QUICKSTART. A
blinking column in the profile
indicates your position.
P1 MANUAL
HEART RATE
CALORIES
DISTANCE
TIME
USER
P2 WEIGHT LOSS
P3 FAT BURNER
P4 CROSS TRAINER
P5 INTERVAL
Upper display: While you exercise,
shows exercise session information
and time.
130 888.8 888.8 8.88:88
HIGH
PEAK
CARDIO
SmartRate
Lower display: While you exercise,
shows information about your session.
P6 HILL CLIMB
P7 GLUTEALS
FATBURN
WARMUP
SmartRate display: Blinking horizontal
bars appear when the SmartRate feature
is activated. Use the SmartRate display to
monitor your heart rate and maintain it in
your target zone.
P8 BASIC HRC
CROSSRAMP
STRIDES/min
RESISTANCE
PROGRAMS key: To begin an exercise
session, press a PROGRAMS key to
cycle through the available programs.
For program descriptions, refer to
PROGRAMS
©
2008 Precor Incorporated en
QUICKSTART key: Press the
QUICKSTART key at the Precor banner to
immediately begin exercising. For more
information, refer to Choosing
CAUTION
Before beginning any fitness
program, see your physician for thorough physical
a
examination. Seek advice from your physician to
learn the target heart rate appropriate for your
fitness level. Do not allow children or those
unfamiliar with its operation on or near this
equipment. Read the product owner's manual
ENTER key: Use the ENTER key to
confirm responses to specific prompts.
QUICK
START
or consult
a
qualified instructor before
operating this equipment. Improper use of
this equipment can result in serious injury. If
you feel pain, faintness, or dizziness, stop
exercising immediately.
ENTER
RESET
RESISTANCE arrow keys: Use the
arrow keys to adjust the resistance.
RESET key: Press this key to end your exercise session and
view your workout summary. Pressing the key a second time,
causes the display to reset to the Precor banner.
CROSSRAMP arrow keys: Use the
arrow keys to adjust the ramp incline.
Owner’s Manual: Display Console
15
Download from Www.Somanuals.com. All Manuals Search And Download.
DISTANCE—Displays an estimate of your cumulative
distance travelled in miles or kilometers based on your
CrossRamp level, resistance level, weight, and caloric
expenditure. You can use the DISTANCE display as a
unique motivational unit of measurement and realize your
fitness goals by varying the elliptical motion of the EFX.
Higher CrossRamp and resistance levels will result in
greater distance travelled.
More Information about the
Upper Display
HEART RATE
CALORIES
DISTANCE
TIME
USER
130 888.8 888.8 8.88:88
HIGH
PEAK
CARDIO
TIME—Displays the amount of time remaining in an
exercise session.
SmartRate
FATBURN
WARMUP
CROSSRAMP
STRIDES/min
RESISTANCE
HEART RATE—Displays your heart rate when you grasp
CALORIES—Displays the estimated cumulative number of
calories burned. The calorie calculation is derived from the
pedaling speed, resistance, and your weight. An accurate
weight entry results in a more accurate calorie count.
When using QUICKSTART and a weight has not been
specified, the default weight is 150 pounds (68 kilograms).
Owner’s Manual: Display Console
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM PROFILE—In most programs, the CrossRamp
setting affects the column height in the program profile as
shown in Figure 7. The profile raises or lowers according
to which arrow key is pressed.
More Information about the
Center Display
HEART RATE
CALORIES
DISTANCE
TIME
USER
130 888.8 888.8 8.88:88
HIGH
PEAK
CARDIO
SmartRate
FATBURN
WARMUP
CROSSRAMP
STRIDES/min
RESISTANCE
Figure 7: Column height (1) and CrossRamp height (2)
in the program profile
SmartRate—Displays your heart rate as a blinking bar
which indicates the zone you are in when you grasp both
touch-sensitive grips. A heart icon blinks in the center
display when a heart rate is being detected. Refer to Using
USER—Displays the current user. Refer to User
Identification.
PROGRAM—Displays the current program selection. Refer
Owner’s Manual: Display Console
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CROSSRAMP—Displays the incremental motion affected
by the ramp position. The CROSSRAMP arrow keys affect
the lift and let you set a ramp incline between 1 and 8. The
value displayed can change in whole number increments.
More Information about the
Lower Display
Note: The number that appears on the display indicates
the selected CrossRamp setting, not the degree of incline.
There is not a one-to-one relationship between the degree
of incline and the CrossRamp setting.
HEART RATE
CALORIES
DISTANCE
TIME
USER
130 888.8 888.8 8.88:88
HIGH
PEAK
CARDIO
SmartRate
STRIDES/min—Displays the number of strides you
complete in a minute up to a maximum value of 510 strides
per minute. A stride is an exaggerated walking movement.
If you start in a position with one foot pedal forward, a
stride is completed when you move the rear foot pedal all
the way forward while the other foot pedal moves to the
rear. Two strides create one complete revolution of the
flywheel. So, the value that appears on the display is
always an even number between 20 and 510. Maintain a
comfortable and consistent stride rate while exercising.
FATBURN
WARMUP
CROSSRAMP
STRIDES/min
RESISTANCE
The lower display provides information about your exercise
session. The numbers that appear relate to your workout
statistics. On certain programs, the lower display is also
used to occasionally indicate information such as an
upcoming change to the resistance or the percent of a
program you have completed.
RESISTANCE—Displays the resistance you feel against
your stride. The RESISTANCE arrow keys let you set a
resistance level between 1 and 16.
Owner’s Manual: Display Console
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAMS Key
Keys
Use the keys to enter your exercise session selections, to
affect what appears on the display, and to establish your
CrossRamp and resistance preferences.
PROGRAMS
User Keys
The PROGRAMS key provides access to all the exercise
programs. Use the PROGRAMS key to cycle through the
eight available programs. For a description of each
USER
Use the ENTER key to confirm your selection. If you did
not specify a user, you will be prompted for a time (with the
exception of the Weight Loss program), weight, and age.
To personalize your exercise session, press a USER key
(1 or 2) at the Precor banner. When you choose a USER
key, personal information such as weight and age are
reinstated after you select your preferred program.
If you haven’t already done so, you’ll need to set up a user.
Refer to User Identification.
Owner’s Manual: Display Console
19
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICKSTART–Press QUICKSTART to start your exercise
session immediately using the Manual Program. Refer to
Lower Keypad
CAUTION
Before beginning any fitness
program, see your physician for
a
thorough physical
examination. Seek advice from your physician to
learn the target heart rate appropriate for your
fitness level. Do not allow children or those
unfamiliar with its operation on or near this
equipment. Read the product owner's manual
RESET–Press RESET to end an exercise session or return
to the Precor banner.
QUICK
START
or consult
a
qualified instructor before
operating this equipment. Improper use of
this equipment can result in serious injury. If
you feel pain, faintness, or dizziness, stop
exercising immediately.
ENTER
RESET
RESISTANCE–Press and hold the RESISTANCE arrow
keys to increase or decrease the resistance from 1 to 16.
ENTER–Use the ENTER key to confirm responses to
specific prompts.
CROSSRAMP–Press and hold the CROSSRAMP arrow
keys to increase or decrease the ramp incline from 1 to 8.
Note: The arrow keys are also used to change selections
at specific prompts.
Changes to the ramp incline are not immediate. It takes
time for the lift to reach the target incline shown on the
display. Ramp changes occur only when the foot pedals
are in motion.
The CrossRamp setting affects the column height in the
program profile. Refer to Figure 7.
Owner’s Manual: Display Console
20
Download from Www.Somanuals.com. All Manuals Search And Download.
User Identification
On the EFX 5.25, you can set up a user identification key.
This user identification (USER) key enables the EFX to
identify you and the information you have stored in the
console. Once you configure your USER key, you can
personalize your exercise session and store information
about your preferred program, session time, weight, and
age.
To set up a user, select a user number by taking the
following steps:
1. At the Precor banner, press a USER key.
2. The display prompts you to enter a time, weight, and
age.
Use the arrow keys to answer each prompt, and then
press ENTER. With each successful entry, you move on
to the next prompt. After you enter the age, the display
indicates that the user setup is complete and resets to
the Precor banner.
To begin an exercise session using your USER key, refer
The USER keys allow two people to customize, store, and
retrieve exercise session selections.
Initially, you must “set up a user” so the EFX can store
exercise session information associated with the specific
user key. Once you enter the requested information, it is
stored until you opt to change it. You can select the same
USER key again, and your user preferences will
Updating User Information
Setting Up a User
USER
HEART RATE
USER
To update user information, take the following steps:
1. At the Precor banner, press and hold a USER key. A
welcome greeting scrolls across the display.
130
8
Owner’s Manual: User Identification
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Continue holding the USER key until USER [1 or 2]
SETUP appears on the display.
2. The display prompts you to enter a time, weight, and age.
Use the arrow keys to answer each prompt, and then
press ENTER. With each successful entry, you move on to
the next prompt. After you enter the age, the display
indicates that the user setup is complete and resets to the
Precor banner.
To begin an exercise session using your USER key, refer
Owner’s Manual: User Identification
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Workout Options
CAUTION: Before beginning any fitness program, see
your physician for a complete physical examination.
Know your physician-recommended heart rate target
zone.
4. Select one of the following options:
Option...
Steps...
To start exercising
immediately
Use the QUICKSTART key.
Refer to Choosing
1. Turn the unit On. The Precor banner scrolls across the
display.
2. Hold on to a stationary handrail while stepping on the
foot pedals.
To view the list of
programs
Press the PROGRAMS key.
3. Face the display. When you are comfortably situated,
begin pedaling.
To begin exercising Press your USER key.
using personal
preferences
Safety Instructions found at the beginning of this
manual.
Equipment Break-in Notice
A thin protective sheath covers the roller arm wheels on
your EFX. As you exercise, the roller arms move up and
down the ramp and the wheels tend to squeak until the
protective sheath wears off. Any noise from the wheels is
normal and will stop after a break-in period. Please allow a
break-in period of approximately ten hours before calling
Customer Support.
Choosing QUICKSTART
Owner’s Manual: Workout Options
23
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICKSTART applies the following defaults:
Prompts
Program
Time
Default Value
Manual
QUICK
START
30 minutes
150 lb (68 kg)
35
RESET
Weight
Age
1. While the Precor banner scrolls, press QUICKSTART
to begin the Manual Program as a guest user.
2. Maintain a comfortable and consistent stride rate while
exercising.
Note: The SmartRate feature is disabled when you
select QUICKSTART from the Precor banner. If you
select QUICKSTART after selecting a Program, the
SmartRate feature is enabled and the program uses
default values.
3. Use the CROSSRAMP and RESISTANCE arrow keys
to adjust the ramp incline and resistance.
Owner’s Manual: Workout Options
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2. A session time blinks in the center display if you choose
a time-based program. Use the arrow keys to select a
number between 1—90 minutes, then press ENTER.
Selecting a Program
P1 MANUAL
3. Enter your weight (23—250 lbs/10—114 kg) and then
your age (10—99).
P2 WEIGHT LOSS
P3 FAT BURNER
P4 CROSS TRAINER
P5 INTERVAL
Note: To change a value (program, time, weight, or age)
that you have already entered, press RESET to return to
the Precor banner. Select a program and again, enter
the appropriate values.
P6 HILL CLIMB
P7 GLUTEALS
P8 BASIC HRC
4. Hold on to a stationary handrail. The ramp automatically
changes to the CrossRamp setting for your program.
Note: When you select a program without an identifying
USER key, you enter the program as a guest user. Your
preferences for weight and age are not stored in
memory. To save this type of information, refer to
PROGRAMS
1. While the Precor banner scrolls, repeatedly press the
PROGRAMS key to review the list of programs.
5. Maintain a comfortable and consistent stride rate while
exercising.
Choose the program you want, and then press ENTER.
6. Use the CROSSRAMP and RESISTANCE arrow keys
to change the ramp incline and resistance.
Note: You can use the QUICKSTART key to bypass the
prompts for time, weight, and age and begin exercising
QUICKSTART for more information.
Selecting a User Key
Owner’s Manual: Workout Options
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press ENTER or QUICKSTART to begin the program
being displayed or choose another program using the
PROGRAMS key. The program you choose is stored
and will be reinstated the next time your USER key is
about how to choose a program.
HEART RATE
USER
130
8
Important: If you make an entry error, press RESET to
return to the Precor banner.
To start your exercise session using personal identification
following steps:
3. The display prompts you for an exercise session time if
you choose a time-based program. To adjust the time,
use the arrow keys. To accept the number appearing on
the display, press ENTER.
1. At the Precor banner, press the same USER key you
4. Begin pedaling.
previously chosen a USER key.
5. Maintain a comfortable and consistent stride rate while
exercising.
A welcome greeting scrolls across the display and the
last program associated with the USER key appears.
User preferences such as time, weight, and age are
reinstated.
The time goal associated with the displayed program
also applies.
6. Use the CROSSRAMP and RESISTANCE arrow keys
to change the ramp incline and resistance.
Cooling Down After a Workout
Incorporate a cool-down period into your workout to help
lower your heart rate and minimize muscle stiffness or
soreness.
Note: You cannot switch to a different program or change
display options during the cool-down period.
Owner’s Manual: Workout Options
26
Download from Www.Somanuals.com. All Manuals Search And Download.
When you complete a program with a time limit, you
automatically enter a cool-down period. The resistance is
reduced by 20%. To readjust the CrossRamp or
resistance, press the arrow keys. To lower your heart rate,
reduce your strides per minute.
To prematurely end the cool-down period, do the following:
1. Grasp a stationary handrail with one hand.
2. Press RESET to view the workout summary.
3. Press RESET again to return to the Precor banner.
A workout summary appears at the end of the cool-down
Important: Hold on to a stationary handrail. Step off the
EFX when the lift has stopped moving.
Important: If you exit a program before completing it, the
cool-down period is bypassed.
Pausing During a Workout or the
Cool-Down Period
Stop pedaling to pause anytime during a workout or during
a cool-down period. The pause mode has a default time
limit of 10 minutes. If you do not resume exercising during
that time, the display returns to the banner.
1. To pause, stop pedaling.
The center display indicates the amount of time
remaining in pause mode.
2. To resume exercising from pause mode, begin
pedaling.
Ending a Workout
CAUTION: Hold on to a stationary handrail when you
near the end of your exercise session.
Owner’s Manual: Workout Options
27
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Slow your pedaling when you complete the cool-down
period.
When the cool-down period ends, or you press the
RESET key, workout statistics, such as TOTAL
CALORIES and DISTANCE, appear on the display. The
statistics flash eight times before the display
automatically resets to the Precor banner.
Note: The workout statistics include warm-up and cool-
down periods.
2. To return to the Precor banner before the workout
summary ends, press the RESET key.
3. Turn Off the EFX and lock the foot pedals in place with
the locking pin.
Important: Never leave children unsupervised around the
EFX. Always turn Off and unplug the EFX when it is not in
use. Lock the foot pedals in place with the locking pin.
Owner’s Manual: Workout Options
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Programs
This section describes the programs available on the EFX.
Use this section as a reference tool to better understand
each program’s purpose. For more information, refer to
Choosing a Program
Choosing a program depends on your goals. If you are a
beginner or returning to regular exercise, you can start a
cardio-conditioning program to slowly return your body to
a comfortable level of exercise. If you have been exercising
and feel that you have an intermediate or advanced fitness
level, you probably have established goals. The Precor
fitness workouts and advice from the experts.
The program descriptions are presented in menu selection
order. The programs available on the EFX are:
ProgramCode Program Name
P1
P2
P3
P4
P5
P6
P7
P8
Manual
Several exercise choices on the EFX are pre-programmed
with recommendations for CrossRamp, resistance and
alternating interval levels. You always have the option to
override the suggested levels with the exception of the
Basic HRC.
Weight Loss
Fat Burner
Cross Trainer
Interval
Hill Climb
Gluteals
Basic HRC
Owner’s Manual: Programs
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Tips
Manual Program
The Manual Program (P1)
profile begins as a flat line. You
control CrossRamp and
•
•
A blinking column indicates your position as you
progress through a program.
PROGRAM
resistance settings using the
•
•
To use the SmartRate feature, you need to specify your
age and hold on to the touch-sensitive grips. Refer to
To exercise indefinitely in any program (with the
exception of Weight Loss), an unlimited exercise time
setting may be an available option. Refer to Selecting a
CROSSRAMP or RESISTANCE arrow keys. The program
profile reflects CrossRamp adjustments in all subsequent
columns. Adjustments to the resistance are reflected in the
lower display and affect the remainder of the program. The
blinking column indicates your position in the program. A
cool-down period occurs automatically when you complete
your specified time goal.
•
If your level of exertion becomes too great, reduce your
strides per minute and change the CrossRamp or
resistance settings using the arrow keys to override
each upcoming column in the program profile.
To use the SmartRate feature, you need to specify your age
during the setup prompts.
•
•
To pause during a program, stop pedaling. Refer to
When you complete a program that contains a time
goal, the automatic cool-down period begins. Refer to
•
•
Default time limits exist for the cool-down period and
pause mode.
Cumulative workout statistics appear when you end
Owner’s Manual: Programs
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Weight Loss Program
Fat Burner Program
The Weight Loss Program (P2)
is targeted at lowering body fat
while improving muscle tone
and conditioning. Use this
The Fat Burner Program (P3) is
targeted at lowering body fat
while improving muscle tone
and conditioning.
PROGRAM
PROGRAM
program if you are beginning or returning to a regular
fitness routine. The exercise session time is fixed at 28
minutes and consists of seven 4-minute intervals. You are
not prompted for a session time. The program raises and
lowers your level of exertion repeatedly over the course of
the exercise session.
The program consists of alternating forward and backward
pedaling movements. Display prompts appear indicating
when to reverse pedal direction at select intervals: 25%,
50%, and 75% of program completion.
For ideal weight loss, your heart rate should be between
55% and 70% of your maximum aerobic heart rate. Set a
comfortable pace and adjust the CrossRamp and
resistance settings using the CROSSRAMP or
RESISTANCE arrow keys to meet the target zone. Refer to
Heart Rate Features. Adjustments to the resistance affect
the remainder of the program. CrossRamp adjustments are
reflected in the program profile.
Initially, the rest interval is set to a CrossRamp of 3 and a
resistance of 1. The work interval is set at a CrossRamp of
6 and a resistance of 8. The lower display indicates when
the preset resistance level is about to change and displays
the level of the next interval.
For ideal weight loss, your heart rate should be between
55% and 70% of your maximum aerobic heart rate. Set a
comfortable pace and adjust the CrossRamp and
resistance settings using the CROSSRAMP or
RESISTANCE arrow keys to meet the target zone. Refer to
Owner’s Manual: Programs
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CrossTrainer
Program
The CrossTrainer Program (P4)
has preprogrammed
CrossRamp settings and an
initial resistance of 1.
Interval Program
The Interval Program (P5) is
one of the best for conditioning
your cardiovascular system.
The program raises and lowers
PROGRAM
PROGRAM
your level of exertion repeatedly for the specified period of
time.
The program consists of optimized CrossRamp settings
combined with alternating forward and backward pedaling
movements that focus on working the thigh, gluteal, and
calf muscle groups. Display prompts appear indicating
when to reverse pedal direction at select intervals: 25%,
50%, and 75% of program completion.
Initially, the rest interval is set to a CrossRamp of 3 and a
resistance of 1. The work interval is set at a CrossRamp of
6 and a resistance of 8. The lower display indicates when
the preset resistance level is about to change and displays
the level of the next interval.
During your exercise session, set a comfortable and
consistent stride rate. If needed, use the CROSSRAMP or
RESISTANCE arrow keys to override upcoming settings.
The settings are repeated throughout the remainder of the
program. When you complete the program, the
CrossRamp and resistance settings return to their
standard defaults. Settings established during your
exercise session are not saved.
During your exercise session, set a comfortable and
consistent stride rate. If needed, use the CROSSRAMP or
RESISTANCE arrow keys to override upcoming settings.
Adjustments to the resistance affect the remainder of the
program. CrossRamp adjustments are reflected in the
program profile.
Owner’s Manual: Programs
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Hill Climb Program
The Hill Climb Program (P6)
has preprogrammed
CrossRamp settings in a fixed
pattern. It is designed to
Gluteals Program
The Gluteals Program (P7) is
designed to exercise your
gluteal muscles.
PROGRAM
PROGRAM
The program consists of alternating forward and backward
pedaling movements. Display prompts appear indicating
when to reverse pedal direction at select intervals: 25%,
50%, and 75% of program completion.
increase muscle tone, cardio-conditioning, and endurance
over several weeks.
The program consists of optimized CrossRamp setting
combined with alternating forward and backward pedaling
movements that focus on working the gluteal muscle
group. Display prompts appear indicating when to reverse
pedal direction at select intervals: 25%, 50%, and 75% of
program completion.
During your exercise session, set a comfortable and
consistent stride rate. If needed, use the CROSSRAMP or
RESISTANCE arrow keys to override upcoming settings.
Adjustments to the resistance affect the remainder of the
program. CrossRamp adjustments are reflected in the
program profile.
During your exercise session, set a comfortable and
consistent stride rate. If needed, use the CROSSRAMP or
RESISTANCE arrow keys to override upcoming settings.
Adjustments to the resistance affect the remainder of the
program. CrossRamp adjustments are reflected in the
program profile.
Owner’s Manual: Programs
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Program Tips
Heart Rate Program
The Basic HRC Program enhances your overall
cardiovascular fitness level to help you achieve your weight
loss and fitness goals. Read the following tips before
selecting a program. These tips provide general
information regarding how the program functions. For more
information and exercise suggestions, refer to the Precor
The Basic HRC Program (P8)
adjusts the resistance to
maintain your heart rate within
two beats per minute of the
PROGRAM
target heart rate while you exercise. To help you monitor
your heart rate while using this program, Target HR
Achieved appears at the top of the SmartRate display
when your heart rate is within two beats per minute of the
target heart rate.
•
The program provides a 3-minute warm-up period.
During this time, you may change the CrossRamp or
resistance, but you cannot adjust the time. At the end
of the warm-up period, the program automatically
controls the resistance.
To use this program, you must enter your age and grasp
the touch-sensitive grips so your heart rate can be
monitored throughout the session.
Note: The warm-up period ends and the program
begins when the 3-minute period elapses or your target
heart rate is maintained within +/- 2 beats per minute.
CAUTION: Consult your physician to determine the
appropriate target heart rate for your age and fitness
level. Your heart rate should never exceed 85% of your
maximum aerobic heart rate. Your maximum heart rate
is equal to 220 minus your age.
•
Pressing the RESISTANCE arrow keys during the
Basic HRC program adjusts your target heart rate.
Owner’s Manual: Programs
34
Download from Www.Somanuals.com. All Manuals Search And Download.
•
The program sets the default target heart rate as 70%
of 220 minus your age. Changing your stride rate or
CrossRamp affects the unit’s ability to maintain your
target heart rate in the preferred zone. It takes time for
the EFX to readjust the resistance so that your heart
rate remains on target. Check the SmartRate and the
HEART RATE displays to see if you are maintaining
your preferred zone and to determine your actual heart
rate. For information about understanding your target
•
•
Changes to the CrossRamp are reflected in the
program’s profile. Automatic resistance changes
appear in the RESISTANCE display.
A cool-down period is incorporated into the program.
Owner’s Manual: Programs
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Programming and Troubleshooting
Certain features remain hidden and can only be accessed
using special keypresses. Read this section if you want to:
Selecting a U.S. Standard or Metric
Display
•
•
•
•
•
Select the units of measure
The EFX can display measurements in either metric or U.S.
standard. The default factory setting is set to display U.S.
standard. To change this setting, perform the following
steps:
View the odometer
Display the number of hours you have used your EFX
View the software versions and part numbers
Check the error log
1. At the Precor banner, press and hold ENTER while
pressing the following keys in sequence without pause:
In general, you would only access this information if
directed to do so by Precor Customer Support.
RESET, CROSSRAMP ▼, RESISTANCE ▲
Use the arrow keys to select a unit of measure (either
METRIC or U.S.).
Advanced Programming Tips
2. When you are ready, press ENTER to accept the
displayed setting. The display indicates the setting is
saved. Press RESET to return to the Precor banner.
•
Always start at the Precor banner.
•
The advanced programming and troubleshooting mode
is accessed by pressing and holding the ENTER key at
the Precor banner, then entering the appropriate key
combination. Any remaining key presses must occur
quickly and without pause.
Note: Changing the display to metric measurements
affects the default settings. Distances and the odometer
values are converted to and appear in kilometers (KM).
Speed appears in kilometers per hour.
•
The QUICKSTART key is disabled while in advanced
programming mode.
Viewing Other Settings
The EFX stores the total number of strides and the total
number of hours the unit has been in use. You can view this
information by performing the following steps:
•
•
Use the arrow keys to change blinking prompts.
Press ENTER to make selections and RESET to return
to the Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting
36
Download from Www.Somanuals.com. All Manuals Search And Download.
1. At the Precor banner, press and hold ENTER while
pressing the following keys in sequence without pause:
Note: If there are no errors in the log, NO ERRORS
appears on the display.
RESET, CROSSRAMP ▲, RESISTANCE ▼
The hour meter at the
Most recent
The software part numbers scroll across the center
display while the odometer and hour meter scroll across
the lower display.
time the error was
1‐Error 40 AT 1234567 STRIDES 1714 HOURS
2. Write the software part numbers below. You will need
these numbers if you call Customer Support with
questions. This information will help rule out any
software-related problems:
Odometer reading at
Error code
the time the error
Figure 8: Error log
UPPER: ___________________
LOWER: ___________________
3. When you are ready, press RESET to return to the
Precor banner.
Viewing the Error Log
The error log displays information about errors that may
have occurred while using the EFX. Up to ten errors are
recorded along with the odometer and hour meter values
at the time the error occurred.
1. At the Precor banner, press and hold the RESET key
for at least four seconds to view the error log. The most
recent error recorded appears on the lower display.
Owner’s Manual: Advanced Programming and Troubleshooting
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the arrow keys to cycle through the error log.
3. Copy the error code information to paper so you can
provide it to Customer Support if needed. Be sure to
copy it exactly as shown.
4. When you no longer need the information in the error
log, press QUICKSTART for at least four seconds to
erase it. NO ERRORS appears on the display and
remains static to let you know when the error log has
been cleared.
Important: You cannot retrieve the error log once you
have cleared it. You may want to resolve any issues you
are experiencing with the EFX before clearing the error
log.
5. When you are ready, press RESET to return to the
Precor banner.
Owner’s Manual: Advanced Programming and Troubleshooting
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Table 2. Erratic heart rate readings
Troubleshooting Heart Rate
Table 2 may help you understand and troubleshoot erratic
heart rate readings.
What appears
on the display
Cause
What to Do
Nothing
The heart rate
receiver is not
installed or it has
To receive Customer
Support, refer to
Important: A heart rate can only be detected when the
EFX is turned On and you hold on to both touch-sensitive
grips.
To conduct electrical impulses from a user’s heart, both
touch-sensitive grips must be grasped firmly for five to ten
seconds. Usually, the concentration of salts in a person’s
perspiration provides enough conductivity to transmit a
signal to the receiver in the display console. However,
because of body chemistry or erratic heartbeats, some
people cannot use the heart rate feature.
Hr
No signal is being
detected, or the
transmission requires are moist, not dry.
more time to
Use both hands and
make sure your hands
establish a heart rate.
Pulsing HEART The heart icon blinks If the heart icon is
when a heart beat is pulsating, it indicates
detected.
that the heart rate
equipment is working
properly.
Troubleshooting Error Codes
If any error codes appear in the display, turn the unit Off
and On. If the error continues to occur, call an authorized
service person for assistance. Refer to Radio Frequency
Owner’s Manual: Advanced Programming and Troubleshooting
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
It is important to perform the minor maintenance tasks
described in this section. Failure to maintain the EFX as
described here could void the Precor Limited Warranty.
Cleaning the Equipment
Most of the working mechanisms are protected inside the
covers. However, for efficient operation, the EFX relies on
low friction. To keep the friction low, the unit’s ramp, foot
pedals, handlebars, and covers must be as clean as
possible.
To reduce the risk of electrical shock,
DANGER
always unplug the unit from its
power source before cleaning it or
performing any maintenance tasks.
Precor recommends the EFX be cleaned before and after
each exercise session. Use mild soap and water; dampen
a soft cloth and wipe all exposed surfaces. This helps
remove any dust or dirt.
Inspecting the EFX Before Use
Look and listen for slipping belts, loose fasteners, unusual
noises, worn or frayed power cords, and any other
indications that the equipment may be in need of service. If
you notice any of these, obtain service.
CAUTION: Do not use any acidic cleaners. Doing so will
weaken the paint or powder coatings and void the
Precor Limited Warranty. Never pour water or spray
liquids on any part of the EFX. Allow the EFX to dry
completely before using.
Important: If you determine that the EFX needs service,
make sure that the EFX cannot be used inadvertently. Turn
the unit Off, insert the locking pin and then unplug the
power cord from its power source. Make sure other users
know that the EFX needs service.
Frequently vacuum the floor around the unit to prevent the
accumulation of dust and dirt, which can affect the smooth
operation of the unit. Use a soft nylon scrub brush to clean
the foot pedals.
To order parts or to contact a Precor authorized service
provider in your area, refer to Radio Frequency
Owner’s Manual: Maintenance
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Long-Term Storage
When the EFX is not in use for any length of time, turn it
Off. Make sure that the power cord is unplugged from its
power source and is positioned so that it will not become
damaged or interfere with people or other equipment.
Owner’s Manual: Maintenance
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor Residential Equipment Limited Warranty
PLEASE READ THESE WARRANTY TERMS AND
Options / Accessories
CONDITIONS CAREFULLY BEFORE USING YOUR PRECOR
INCORPORATED PRODUCT. BY USING THE EQUIPMENT,
YOU ARE CONSENTING TO BE BOUND BY THE
Many options or accessories have components that are
connected internally or mounted inside the electronic console.
The following guidelines determine the warranty for these
components. If the internal components are installed by the
factory or by an authorized dealer as part of the original sale and
delivery, they have a warranty that is identical to the warranty of
the equipment in which they are connected or mounted. If the
internal components are not installed by the factory or by an
authorized dealer as part of the original sale and delivery, they
have a 90-day parts and labor limited warranty. All components
that are not internally connected have 90-day parts only limited
warranty. Satisfactory proof of purchase is required in all cases.
FOLLOWING WARRANTY TERMS AND CONDITIONS.
Limited Warranty
Precor Incorporated warrants all new Precor products to be free
from defects in materials and manufacture for the warranty period
set forth below. The warranty period commences on the invoice
date of original purchase. This warranty applies only against
defects discovered within the warranty period and extends only to
the original purchaser of the product. Parts repaired or replaced
under the terms of this warranty will be warranted for the
remainder of the original warranty period only. To make claim
under warranty, the buyer must notify Precor or their authorized
Precor dealer within 30 days after the date of discovery of any
nonconformity and make the affected product available for
inspection by Precor or its service representative. Precor’s
obligations under this warranty are limited and set forth below.
Conditions and Restrictions
This warranty is valid only in accordance with the conditions set
forth below:
1. The warranty applies to the Precor product only while:
a. It remains in the possession of the original purchaser and
proof of purchase is demonstrated
b. It has not been subjected to accident, misuse, abuse,
improper service, or non-Precor modifications
c. Claims are made within the warranty period
Warranty Periods and Coverage
All products for the home are warranted for the following periods:
•
•
•
•
Lifetime frame and welds
5 years parts and wear items
1 year labor
2. This warranty does not cover damage or equipment failure
caused by electrical wiring not in compliance with electrical
codes or Precor owner’s manual specifications, or failure to
provide reasonable and necessary maintenance as outlined in
the owner’s manual.
Coverage for options and accessories defined below.
Owner’s Manual: Precor Residential Equipment Limited Warranty
42
Download from Www.Somanuals.com. All Manuals Search And Download.
DISCLAIMS AND EXCLUDES ALL OTHER OBLIGATIONS OR
LIABILITIES, EXPRESS OR IMPLIED, ARISING BY LAW OR
OTHERWISE, WITH RESPECT TO ANY NONCONFORMANCE OR
DEFECT IN ANY PRODUCT, INCLUDING BUT NOT LIMITED TO: (A)
ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT,
WHETHER OR NOT ARISING FROM THE NEGLIGENCE OF PRECOR
OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED);
AND (B) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM, OR REMEDY
FOR LOSS OF OR DAMAGE TO ANY EQUIPMENT. This disclaimer
and release shall apply even if the express warranty set forth
above fails of its essential purpose.
3. Warranty of all Precor products applies to residential use only
and is void when products are used in a nonresidential
environment or installed in a country other than where sold.
4. Except in Canada, Precor does not pay labor outside the
United States.
5. Warranties outside the United States and Canada may vary.
Please contact your local Dealer for details.
This limited warranty shall not apply to:
1. Software version upgrades
2. Cosmetic items, including, but not limited to the following:
grips, seats, and labels.
3. Repairs performed on Precor equipment missing a serial
number or with a serial tag that has been altered or defaced.
4. Service calls to correct installation of the equipment or instruct
owners on how to use the equipment.
5. Pickup, delivery, or freight charges involved with repairs.
6. Any labor costs incurred beyond the applicable labor warranty
period.
Exclusive Remedies
For any product described above that fails to conform to its
warranty, Precor will provide, at their option, one of the following:
(1) repair; (2) replacement; or (3) refund of the purchase price.
Precor Limited Warranty service may be obtained by contacting
the authorized dealer from whom you purchased the item. Precor
compensates Servicers for warranty trips within their normal
service area to repair equipment at the owner’s location. You may
be charged a trip charge outside the service area. THESE SHALL
BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY
BREACH OF WARRANTY.
Disclaimer and Release
The warranties provided herein are the exclusive warranties given
by Precor and supersede any prior, contrary or additional
representations, whether oral or written. ANY IMPLIED
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE THAT APPLY TO ANY
PARTS DESCRIBED ABOVE ARE LIMITED IN DURATION TO THE
PERIODS OF EXPRESS WARRANTIES GIVEN ABOVE FOR THOSE
SAME PARTS. PRECOR HEREBY DISCLAIMS AND EXCLUDES
THOSE WARRANTIES THEREAFTER. Some states do not allow
limitation on how long an implied warranty lasts, so the above
limitation may not apply to you. PRECOR ALSO HEREBY
Owner’s Manual: Precor Residential Equipment Limited Warranty
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Exclusion of Consequential and Incidental
Damages
PRECOR AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION
OR LIABILITY, WHETHER ARISING IN CONTRACT (INCLUDING
WARRANTY), TORT (INCLUDING ACTIVE, PASSIVE, OR IMPUTED
NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR
DAMAGE TO THE EQUIPMENT, PROPERTY DAMAGE, LOSS OF
USE, REVENUE OR PROFIT, COST OF CAPITAL, COST OF
SUBSTITUTE EQUIPMENT, ADDITIONAL COST INCURRED BY
BUYER (BY WAY OF CORRECTION OR OTHERWISE) OR ANY
OTHER INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL
DAMAGES, WHETHER RESULTING FROM NONDELIVERY OR FROM
THE USE, MISUSE OR INABILITY TO USE THE PRODUCT. This
exclusion applies even if the above warranty fails of its essential
purpose and regardless of whether such damages are sought for
breach of warranty, breach of contract, negligence, or strict
liability in tort or under any other legal theory. Some states do not
allow the exclusion or limitation of incidental or consequential
damages, so the above limitation might not apply.
This warranty gives you specific legal rights, and you may also
have other rights, which vary state to state.
Effective 01 July 2010
P/N 36287-111
Owner’s Manual: Precor Residential Equipment Limited Warranty
44
Download from Www.Somanuals.com. All Manuals Search And Download.
TELL US ABOUT YOUR NEW PRECOR PRODUCT
Product
Serial
Number:
Date of
Purchase:
Month
Day
Year
The serial number is located on the shipping box and on the product.
Purchased
from:
Dealer Name
Please indicate the type of product purchased:
❑
❑
❑
Elliptical Fitness CrossTrainerTM (EFX®)
Treadmill
❑
❑
❑
StretchTrainerTM
Cycle
Stair Climber
Strength Training System
TELL US ABOUT YOU
❑ Mr.
❑ Mrs.
❑ Ms.
First Name
Street Address
City
Middle Initial
Last Name
Apt./Suite:
State
Zip Code
Area Code
Telephone
Your Email Address
Gender:
❑ Male
❑ Female ❑ Divorced
Marital status:
❑ Married
Age:
Annual household income:
❑ Under $50,000
❑ $51,000-75,000
❑ $76,000-100,000
❑ $101,000-150,000
❑ $151,000+
What are your fitness goals?
❑ Weight loss/management
❑ Muscle tone enhancement
❑ Cardiovascular improvement
❑ Overall health
❑ Increase energy and flexibility
❑ Stress reduction
❑ Rehabilitation
❑ Under 18
❑ 18-24
❑ 25-34
❑ 35-44
❑ 45-54
❑ 55-64
❑ 65+
❑ Widowed
❑ Never been married
❑ Other
Purchase (check all that apply):
How did you FIRST become aware of Precor
TELL US ABOUT YOUR PURCHASE
❑ First Precor product
products (choose only one):
❑ A gift
❑ Friend/relative
❑ Physician
❑ Replaces a Precor product of the same type
❑ Replaces same type of product – different brand
❑ Addition to equipment currently owned
❑ Fitness club
What factors MOST influenced your decision to
purchase your Precor product (choose up to three):
❑ Internet
❑ News report or product review
❑ Precor reputation
❑ Prior use of Precor product(s)
❑ Design/appearance
❑ Special product features
❑ Physician recommendation
❑ Rebate or sale price
❑ Quality/durability
❑ Warranty
❑ Magazine advertisement or article
❑ Print advertisement
❑ In-store display or demonstration
❑ Other
❑ Value for the price
Effective 23 July 2011
P/N 45623-141
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank You and Welcome to Precor
To allow us to serve you better, please take a few moments to
complete and return your warranty registration.
YOU MAY ALSO REGISTER ONLINE AT
If you have questions or need additional information, contact your
local dealer or call Precor Customer Service at 800-786-8404.
Fold along dotted line and tape closed before mailing.
.
R E T
9 A 8 W 0 , 7 2 - 4 v 0 i l l 0 e 2 o o d i n W
x 7 2 0 2 P O B o
2 0 0 3 1 1 4 2 n d A
P r e c o r I n c o r
u e e N v n E
p o r a t e d
H E R E
A M S P T
C E P L A
Download from Www.Somanuals.com. All Manuals Search And Download.
EFX5.25 Elliptical Fitness CrossTrainerTM
Product Specifications
Electronic Readouts
Length:
Width:
Height:
Weight:
Power:*
77 in (196 cm)
29 in (74 cm)
65 in (165 cm)
214 lb(80 kg)
120 VAC, 60Hz
240 VAC, 50 Hz
25°
1–8
1–16
Powder-coated steel
% Complete
Average Heart Rate*
Calories
CrossRamp
Heart Rate*
Profile
Resistance
Telemetry Heart Rate*
SmartRate*
Strides per Minute
Target Heart Rate
Time
Total Strides
Units
CrossRamp®:
Incline Settings:
Resistance Levels
Frame:
Vertical Gain
* Use of touch-sensitive heart rate grips is required.
Regulatory Approvals: FCC, ETL, CE
* See the product label to determine the operating voltage of your equipment.
Product Features
Programs
QUICKSTART™
SmartRate®
Touch Heart Rate
User Keys (2)
Manual (P1)
Weight Loss (P2)
Fat Burner (P3)
Cross Trainer (P4)
Interval (P5)
Hill Climb (P6)
Gluteals (P7)
Basic HRC* (P8)
Download from Www.Somanuals.com. All Manuals Search And Download.
Precor, C, CrossRamp, EFX, M, Move Beyond, and SmartRate are registered trademarks of Precor
Incorporated. Crosstrainer, QuickStart, and StretchTrainer are trademarks of Precor Incorporated.
Copyright 2011 Precor Incorporated.
Specifications subject to change without notice.
NOTICE:
Precor is widely recognized for its innovative, award winning designs of exercise equipment.
Precor aggressively seeks U.S. and foreign patents for both the mechanical construction and the
visual aspects of its product design. Any party contemplating the use of Precor’s product designs
is hereby forewarned that Precor considers the unauthorized appropriation of its proprietary rights
to be a very serious matter. Precor will vigorously pursue all unauthorized appropriation of its
proprietary rights.
EFX 5.25 OM 300088-201, en
Warranty #36287-111, en
Registration Card #45623-141, en
28 September 2011
Precor Incorporated
20031 142nd Ave NE
P.O. Box 7202
Woodinville, WA USA 98072-4002
Download from Www.Somanuals.com. All Manuals Search And Download.
|