PAB-21X
AB-BENCH
Owner’s Manual
WWW.BODYSOLID.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
TABLE OF CONTENTS
• SAFETY INSTRUCTIONS.......................
• PREPARATION.......................................
• HARDWARE LIST...................................
• HARDWARE ILLUSTRATION.................
• PART LIST / ILLUSTRATION..................
• ASSEMBLY INSTRUCTIONS.................
• EXPLODED VIEW...................................
• CONTACT PAGE.....................................
PAGE 4
PAGE 5
PAGE 6
PAGE 7
PAGE 10
PAGE 12
PAGE 16
PAGE 18
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
SAFETY INSTRUCTIONS
When using exercise equipment,
you should always take basic
precautions including the
following:
The PAB-21X is designed for your enjoyment. By
following these precautions and using common sense,
you will have many safe and pleasurable hours of
healthful exercise with your Powerline Ab-Bench.
•
Read all instructions before using the PAB-21X.
These instructions are written to ensure your safety
and to protect the unit.
After assembly, you should check all functions to
ensure correct operation. If you experience problems,
fi r st recheck the assembly instructions to locate any
possible errors made during assembly. If you are un-
able to correct the problem, call the dealer from whom
you purchased the machine or call 1-800-556-3113 for
the dealer nearest you.
•
•
Do not allow children on or near the equipment.
Use the equipment only for its intended purpose
as described in this guide. Do not use accessory
attachments that are not recommended by the
manufacturer. Such attachments might cause serious
injuries.
Wear proper excercise clothing and shoes for your
workout, no loose clothing.
Keep hands, limbs, loose clothing, and long hair well
out of the way of all moving parts
Use care when getting on or off the unit.
Do no overexert yourself or work to exhaustion.
If you feel any pain or abnormal symptoms, stop your
workout immediately and consult your physician.
Never operate unit when it has been dropped or
damaged. Return the equipment to a service center
for examination and repair.
Never drop or insert objects into any opening in the
equipment.
Always check the unit and its cables before each use.
Make sure that all fasteners and cables are secure
and in good working condition.
Obtaining Service
Please use this Owner’s Manual to make sure that
all parts have been included in your shipment. When
ordering parts, you must use the part number and
description from this Owner’s Manual. Use only
Powerline by Body Solid replacement parts when
servicing this machine. Failure to do so will void your
warranty and could result in personal injury.
•
•
•
•
•
For information about product operation or
service, check out the official Powerline website
Powerline dealer or a Powerline factory-authorized
service company or contact Body-Solid customer
service at one of the following:
•
•
•
Toll Free: 1-800-556-3113
Phone: 1-708-427-3555
•
Do not use the equipment outdoors or near water.
Fax:
1-708-427-3556
Email: [email protected]
Personal Safety During Assembly
Or write to: Body-Solid, Inc.
Service Department
•
•
Before beginning assembly, please take the time to
read the instructions thoroughly.
1900 S. Des Plaines Ave.
Forest Park, IL 60130 USA
Read each step in the assembly instructions and
follow the steps in sequence. Do not skip ahead. If
you skip ahead, you may learn later that you have
to disassemble components and that you may have
damaged the equipment
Assemble and operate the PAB-21X on a solid, level
surface. Locate the unit a few feet from the walls or
furniture to provide easy access.
Retain this Owner’s Manual for
furture reference. Part numbers
are required when ordering parts.
•
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
PREPARATION
Required tools
Assembly Tips
The basic tools that you must obtain before assembling
the PAB-21X include but are not limit to:
Read all “Notes” on each page before beginning each step.
While you may be able to assemble the PAB-21X using the
illustrations only, important safety notes and other tips may be
included in the text.
• Standard Wrench Set
• Metric Wrench Set
Some pieces may have extra holes that you will not use. Use
only those holes indicated in the instructions and illustrations.
• Adjustable Wrench
• Standard / Metric Allen Key Set
Installation Requirements
NOTE: With so many assembled parts, proper
alignment and adjustment is critical. While
tightening the nuts and bolts, be sure to leave
room for adjustments.
Follow these installation requirements when assembling
the PAB-21X:
NOTE: The bottles that are marked “Poison” is your
touch up paint. Keep away from children.
Set up the PAB-21X on a solid, flat surface. A smooth, flat
surface under the machine helps keep it level.
: Obtain assistance! If you feel like you can’t
assemble the PAB-21X by yourself then do
not attempt to do so as this could result in
injury. Review the Installation Requirements
before proceeding with the following steps.
Provide ample space around the machine. Open space
around the machine allows for easier access.
For aesthetic purposes, insert all bolts in the same
direction unless specified (in text or illustrations) to do
otherwise.
Leave room for adjustments. Tighten fasteners such as
bolts, nuts, and screws so the unit is stable, but leave
room for adjustments. Do not fully tighten fasteners until
instructed in the assembly steps to do so.
Fill out and mail the warranty card.
Ordering Replacement Parts
If you need to order replacement parts please be
prepared to provide the following information
when contacting us so that we can assist you better.
1. Model Number
2. Place of Purchase
3. Serial Number (S/N)
4. Part # and Description
YOUR S/N # CAN
BE FOUND HERE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
HARDWARE LIST
PART #
SIZE
DESCRIPTION
QUANTITY
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
Part #1
M10x65 Hex Head Bolt
Qty. 4
Qty. 4
Part #2
M10x70 Hex Head Bolt
M10x70 THUMB SCREW
Part #3
Qty. 1
Part #4
M10x20 Hex Head Bolt
Qty. 2
““
ˆ˜Vꢀ
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
Part #5
3/8”X2 1/4” Hex Head Bolt
Qty. 1
QTY. 6
Part #6
M10 Nylon Lock Nut
Part #7
Part #8
3/8” Nylon Lock Nut
M10 Washer
QTY. 1
QTY. 7
Part #9
M10 Spring Washer
QTY. 5
““
ˆ˜Vꢀ
8
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
Part #10
2”X2” end cap
Qty. 3
Qty. 1
Part #11
51.5mm dia. pulley
Part #12
Part #13
Part #14
6mm dia. spring snap link
820mm steel cable
harness
Qty. 2
Qty. 1
Qty. 1
““
ˆ˜Vꢀ
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
PART LIST
Part A
Part B
Part C
lower mainframe
seat frame
mainframe support
[1pcs]
[1pcs]
[1pcs]
Part D
Part E
Part F
bottom mainframe
seat pad
upper mainframe
[1pcs]
[1pcs]
[1pcs]
Part G
Part H
Part I
back pad holder
back pad
weight holder
[1pcs]
[1pcs]
[1pcs]
10
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
NOTES
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
STEP 1
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware in this step. DO NOT wrench tighten
until the last step. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
1A. attach seat frame (B) to lower mainframe (A) using:
2 - (#1) M10X65mm hex head bolt
2 - (#8) M10 washer
2 - (#6) M10 nylon lock nut
1B. attach seat pad (E) to seat frame (B) using:
2 - (#1) M10X65mm hex head bolt
2 - (#9) M10 spring washer
2 - (#8) M10 washer
1C. attach mainframe support (C) to bottom mainframe
(D) using:
2 - (#3) M10X70mm hex head bolt
2 - (#6) M10 nylon lock nut
1D. Attach end caps to end of seat frame (B) and to
both ends of bottom mainframe (D) using:
3 - (#10) 2”X2” end cap
12
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
STEP 1
Above shows STEP 1
assembled and completed
Step 1A, 1B, 1D
Step 1C, 1D
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
STEP 2
BE CAREFUL TO ASSEMBLE ALL COMPONENTS
IN THE SEQUENCE THAT THEY ARE PRESENTED.
NOTE:
finger tighten all hardware in this step. DO NOT wrench tighten
until the last step. some components may be pre-assembled.
nylon lock nuts will not fully screw onto bolts, must wrench tighten.
2A. slide upper mainframe (F) onto lower mainframe (A).
2B. attach mainframe support (C) to lower mainframe (A)
and upper mainframe (F) using:
2 - (#2) M10X70mm hex head bolt
2 - (#6) M10 nylon lock nut
2C. attach back pad (H) to lower mainframe (A) using:
1 - (#3) M10X70mm thumb screw
1 - (#9) M10 spring washer
1 - (#8) M10 washer
2D. Attach back pad holder (G) to back pad (H) using:
2 - (#4) M10X20mm hex head bolt
2 - (#9) M10 spring washer
2 - (#8) M10 washer
2E. Attach ø51.5mm pulley (11) to upper mainframe (F)
using:
1 - (#5) 3/8”X2 1/4” hex head bolt
1 - (#7) 3/8” nylon lock nut
2F. Route 820mm cable (#13) over pulley (#11) and under
bar of upper main frame (F). Attach ball end of
cable to snap link (#12) then harness (#14). Attach
other end of cable to snap link (#12) then weight
holder (I) which might be inside a white foam box.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
STEP 2
Above shows STEP 2
assembled and completed
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
EXPLODED VIEW
16
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PAB-21X
please write your serial number in the boxes below
S/N #
- - - -
®
Body-Solid
Built for Life
1900 S. Des Plaines Ave.
Forest Park, IL 60130
Phone:(708)427-3555
Fax:(708)427-3556
Hours: M-F 8:30 - 5:00 CST
Copyright 2011. Body-Solid. All rights reserved. Body-Solid reserves the right to change design and speci!cations when we feel it will improve the product.
Body-Solid machines maintain several patented and patent pending features and designs. All rights reserved on all design patents and utility patents.
ᓻ
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|