R
Please do not return product to retailer.
Por favor, no devuelva el producto al lugar de compra.
Veuillez ne pas retourner le produit au détaillant.
1--800--554--6723
Register your product online at:
Registre su producto en línea en:
Enregistrez votre produit en ligne à l’adresse :
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
PPB3000B
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury. Refer
to your original manual for additional Warnings and Operating
Instructions.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves. Refiera a su manual original para las Instrucciones
de Funcioniamiento y las Advertencias adicionales.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves. Référez--vous à votre
manuel original pour des Avertissements et des Instructions d’Uti-
lisation additionnels.
Poulan PRO
7349 Statesville Road
Charlotte, NC 28269
545212828 Rev. 3 6/15/10 BRW
Download from Www.Somanuals.com. All Manuals Search And Download.
D Always wear eye protection when operat-
ing, servicing, or performing maintenance
on this attachment. Wearing eye protection
will help to prevent rocks or debris from be-
ing blown or ricocheting into eyes and face
which can result in blindness and/or seri-
ous injury. Eye protection should be
marked Z87.
dropped, damaged, left outdoors, or dropped
into water, return it to your authorized service
dealer for repair. Unplug the unit from the power
source when not in use, before servicing, and
when changing accessories and/or attach-
ments. Do not put any object into openings. Do
not use with any opening blocked; keep free of
dust, lint, hair and anything that may reduce air
flow.
D Always wear foot protection. Do not go
barefoot or wear sandals.
S Use only a voltage supply as shown on the
nameplate of the powerhead.
D Always wear respirator or face mask when
working with unit in dusty environments.
D Secure hair above shoulder length. Secure
or remove jewelry, loose clothing, or cloth-
ing with loosely hanging straps, ties, tas-
sels, etc. They can be caught in moving
parts.
D Do not operate unit when you are tired, ill,
upset, or if you are under the influence of al-
cohol, drugs, or medication.
D Keep children, bystanders, and animals
away from work area a minimum of 30 feet
(10 meters) when starting or operating unit.
Do not point blower discharge opening in
the direction of people or pets.
S Avoid dangerous environments. Do not use
in unventilated areas or where dust or explo-
sive vapors can build up.
S To reduce the risk of electric shock, the
powerhead may have a polarized plug (one
blade is wider than the other); if so, it will re-
quire the use of a polarized extension cord.
The appliance plug will fit into a polarized
extension cord only one way. If the plug
does not fit fully into the extension cord, re-
verse the plug. If the plug still does not fit,
obtain a correct polarized extension cord.
A polarized extension cord will require the
use of a polarized wall outlet. This plug will
fit into the polarized wall outlet only one
way. If plug does not fit fully into the wall
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper walloutlet. Do not change the equip-
ment plug, extension cord receptacle, or
extension cord plug in any way.
FUEL SAFETY (for gas powerheads)
D Eliminate all sources of sparks or flame (in-
cluding smoking, open flames, or work that
cancausesparks) in the areas where fuel is
mixed, poured, or stored.
D Mix and pour fuel in an outdoor area; store
fuel in a cool, dry, well ventilated place; use
an approved, marked container for all fuel
purposes.
D Do not smoke while handling fuel or while
operating the unit.
D Make sure the attachment is properly as-
sembled and in good operating condition.
D Do not fill fuel tank while engine is running.
D Avoid spilling fuel or oil. Wipe up fuel spills
before starting engine.
D Move at least 10 feet (3 meters) away from
fuel and fueling site before starting engine.
D Always store gasoline in a container ap-
proved for flammable liquids.
S To reduce risk of electrical shock, use ex-
tension cords specifically marked as suit-
able for outdoor appliances having electri-
cal rating not less than the rating of unit.
Cord must be marked with suffix “W--A” (in
Canada “W”). Make sure your extension
cord is in good condition. Inspect extension
cord before useand replaceif damaged. Do
not use a damaged cord. Cord insulation
must be intact with no cracks or deteriora-
tion. Plug connectors must beundamaged.
The extension cord used to reach the pow-
er source must be heavy enough to carry
current from the power source the full length
of the extension cord to the unit. An under-
sized extension cord will cause a drop in
line voltage resulting in loss of power and
overheating. If in doubt, use the next heavi-
er gauge. The lower the gauge number, the
heavier the cord.
S Do not use multiple cords.
S Keep the extension cord clear of operator and
obstacles at all times.
S Tie cord to cord retainer and connect to re-
cessed plug as shown in this manual to pre-
vent damage to unit and/or extension cord
and to reduce the possibility of the exten-
sion corddisconnecting fromthe unit during
operation.
ELECTRICAL SAFETY (for electric
powerheads)
WARNING:
Avoid a dangerous environment. To reduce the
risk of electrical shock, do not use in rain, in
damp or wet locations, or around swimming
pools, hot tubs, etc. Do not expose to snow,
rain, or water to avoid the possibility of electrical
shock. Do not use on wet surfaces. Do not han-
dle extension cord plug or unit with wet hands.
Avoid dangerous situations. Do not use in the
presence of flammable liquids or gases to avoid
creating a fire or explosion and/or causing dam-
age to unit. Do not abuse cord. Never carry the
unit by the extension cord or yank extension
cord to disconnect unit. To unplug, grasp the
plug, not the cord. Do not use cord as a handle,
close a door on cord, or pull cord around sharp
edges or corners. Turn off all controls before un-
plugging. Do not expose cords to heat, oil, or
water. Do not use with damaged cord or plug. If
unit is not working as it should, has been
S Do not attempt to repair unit. Inspect the insu-
lation and connectors on the powerhead and
extension cord before each use. If there is
any damage, do not use until damage is re-
paired by your authorized service dealer.
S Do not use the powerhead if the switch
does not turn the unit on and off properly.
Have the unit repaired by your authorized
service dealer.
-- 3 --
Download from Www.Somanuals.com. All Manuals Search And Download.
S Avoid unintentional starting of the unit. Nev-
er carry unit with your finger on the switch.
Be sure the switch is in the OFF position
and never touch the switch when connect-
ing extension cord.
S Never use for spreading chemicals, fertiliz-
ers, or other substances which may contain
toxic materials.
S To avoid spreading fire, do not use near leaf
or brush fires, fireplaces, barbecue pits,
ashtrays, etc.
S Wear hearing protection.
S Use only in daylight or good artificial light.
D Avoid any body contact with any grounded
conductor, such as metal fences, or pipes, to
avoid the possibility of electric shock.
D Ground Fault Circuit Interrupter (GFCI)
protection should be provided on the circuit
or outlet to be used for the powerhead. Re-
ceptacles are available having built-in
GFCI protection and may be used for this
measure of safety.
MAINTAIN YOUR UNIT PROPERLY
WARNING: Disconnect powerhead
spark plug (or disconnect powerhead from
power source) before performing mainte-
nance.
D Have all maintenance other than the rec-
ommended procedures described in the in-
struction manual performed by your autho-
rized service dealer.
D Always see your authorized service dealer to
replace a damaged impeller. Parts that are
chipped, cracked, broken, or damaged in
any other way can fly apart and cause seri-
ous injury. Have damaged parts replaced
before using attachment.
D Use only recommended Poulan PRO re-
placement parts; use of any other parts
may void your warranty and cause damage
to your unit.
D Never douse or squirt the attachment with
water or any other liquid.
D Stop the motor immediately if you are ap-
proached.
BLOWER SAFETY
WARNING: Never put hands or other
objects into blower housing to avoid serious
injury from the rotating impeller.
WARNING: Inspect the area before
using the unit. Remove all debris and hard ob-
jects such as rocks, glass, wire, etc., that can
ricochet, be thrown, or otherwise cause injury
or damage during operation.
S Inspect attachment before each use for
worn, loose, missing, or damaged parts. Do
not use until unit is in proper working order.
S Keep outside surfaces free from oil and
fuel.
S Never start or run engine inside a closed
room, building or other unventilated area.
Breathing exhaust fumes can kill.
S Avoid dangerous environments. Do not use
in unventilated areas or where explosive
vapors or carbon monoxide build--up could
be present.
S Do not set unit on any surface except a
clean, hard area while engine is running.
Debris such as gravel, sand, dust, grass,
etc. could be picked up by the air intake and
thrown out through discharge opening,
damaging unit, property, or causing serious
injury to bystanders or operator.
S Do not overreach or use from unstable sur-
faces such as ladders, trees, steep slopes,
rooftops, etc. Keep firmfooting andbalance
at all times.
S Never place objects inside the discharge
opening; always direct the blowing debris
away frompeople, animals, glass, andsolid
objects such as trees, automobiles, walls,
etc. The forceof aircan causerocks, dirt, or
sticks to be thrown or to ricochet which can
hurt people or animals, break glass, or
cause other damage.
TRANSPORTING AND STORAGE
D Hand carry the unit with the engine
stopped.
D Allow the powerhead and attachment to
cool and secure the unit before storing or
transporting in a vehicle.
D Store unit andfuelin area where fuelvapors
cannot reach sparks or open flames from
water heaters, electric motors or switches,
furnaces, etc.
D Store in a high, cool, dry, indoor area out of
reach of children.
If situations occur which are not covered in this
manual, use care and good judgment. If you
need assistance, call 1--800--554--6723.
SPECIAL NOTICE: Exposure to vibrations
through prolonged use of gasoline powered
hand tools could cause blood vessel or nerve
damage in the fingers, hands, and joints of peo-
ple prone to circulation disorders or abnormal
swelling. Prolonged use in cold weather has
been linked to blood vessel damage in other-
wise healthy people. If symptoms occur such as
numbness, pain, loss of strength, change in skin
color or texture, or loss of feeling in the fingers,
hands, or joints, discontinue the use of this tool
and seek medical attention. An anti--vibration
system does not guarantee the avoidance of
these problems. Users who operate power tools
on a continual and regular basis must monitor
closely their physical condition and the condition
of this tool.
S Check air intake opening frequently. Keep
vents and discharge opening free of debris
which can accumulate and restrict proper
air flow.
S Never place any object in air intake opening
as this could restrict proper air flow and cause
damage to the unit.
SAVE THESE INSTRUCTIONS
-- 4 --
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
KNOW YOUR BLOWER ATTACHMENT
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BLOWER ATTACHMENT. Compare the illustrations withyour unit to familiarizeyourself with the
location of the various controls and adjustments. Save this manual for future reference.
Hanger
Air Intake O
Blower Discharge
Opening
OPERATING THE COUPLER
Coup
Your powerhead is equipped with a coupler
which enables optional attachments to be
installed. The optional attachments are:
MODEL:
Edger . . . . . . . . . . . . . . . . . . . . . PPB1000E
Cultivator . . . . . . . . . . . . . . . . . . PPB2000T
Pruner . . . . . . . . . . . . . . . . . . . . PPB5000P
Pruner . . . . . . . . . . . . . . . . . . . . PPB5500P
Brushcutter* . . . . . . . . . . . . . . . PPB4000C
*not designed for use with electric powerheads
Attachment
SEN
Knob
TIGHTEN
WARNING: Always disconnect pow-
erhead spark plug (or disconnect powerhead
frompower source) beforeremoving or instal-
ling attachments.
2. Press and hold the locking/release button.
REMOVING ATTACHMENT
Locking/Release
Button
CAUTION: When removing or installing at-
tachments, place the unit on a flat surface for
stability.
1. Loosen the coupler by turning the knob
counterclockwise.
Upper Shaft
Attachment
Coupler
3. While securely holding the upper shaft,
pull the attachment straight out of the
coupler.
-- 5 --
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING ATTACHMENT
1. Remove the shaft cap from the attach-
ment (if present) and discard.
2. Position locking/release button of attach-
ment into guide recess of upper shaft
coupler.
3. Push the attachment into the coupler until
the locking/release button snaps into the
primary hole.
4. Before using theunit, tighten the knobse-
curely by turning clockwise.
INSTALLING ATTACHMENT
HANGER
An attachment hanger is provided for storage
whenattachment is not in use. To install hang-
er on attachment:
1. Remove the shaft cap from the attach-
ment (if present) and discard.
2. Press and hold the locking/release but-
ton.
3. Push hanger onto the attachment until
the locking/release button snaps into the
hole.
OPERATING POSITION
Primary Hole
Coupler
ALWAYS WEA
Guide Recess
Eye Protection
Locking/
Release
Button
Upper
Shaft
Attachment
WARNING: Make sure the locking/
release button is locked in the primary hole
and the knob is securely tightened before op-
erating the unit. Using the wrong hole could
lead to serious injury or damage to the unit.
WARNING: Inspect the area before
using the unit. Remove all debris and hard
objects such as rocks, glass, wire, etc., that
can ricochet, be thrown, or otherwise cause
injury or damage during operation.
Use your blower attachment for:
S Sweeping debris or grass clippings from
driveways, sidewalks, patios, etc.
S Blowing grass clippings, straw, or leaves into
piles, or removing debris from corners,
around joints, or between bricks.
Control air flow by directing the blower dis-
charge opening down or to one side. Always
work away from solid objects such as walks,
large stones, vehicles, and fences.
Clean corners by starting in corners and moving
outward. This will help prevent an accumulation
of debris which could fly into your face.
Be careful when working near plants. The force
of the air could damage tender plants.
Locking/Release
Button in Primary Hole
MAINTENANCE
INSPECT AND CLEAN UNIT
WARNING: Always stop unit and dis-
connect spark plug wire (or disconnect pow-
erheadfrompower source) before performing
maintenance.
AND LABELS
S After each use, inspect complete unit for
loose or damaged parts. Clean the unit and
labels using a damp cloth with a mild deter-
gent.
CHECK FOR LOOSE FASTENERS
S Wipe off unit with a clean dry cloth.
AND PARTS
S Housing Screws
-- 6 --
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
SEASONAL STORAGE
WARNING: Perform the following
steps after each use:
Prepare attachment for storage at end of sea-
son or if it will not be used for 30 days or more.
If your blower attachment is to be stored for a
period of time:
S Allow attachment to cool before storing or
transporting.
S Store in a high, cool, dry, indoor area out of
reach of children.
S Clean the entire unit.
S Inspect attachment for any loose or dam-
aged parts. Tighten any loose screws.
S Replace any damaged, worn or broken
parts.
S At the beginning of the next season, use
only fresh fuel having the proper gasolineto
oil ratio.
LIMITED WARRANTY
Poulan PRO, a division of Husqvarna Consum-
er Outdoor Products N.A., Inc., warrants to the
original consumer purchaser that each new
Poulan PRO brand gasoline tool or attachment
is free from defects in material and workman-
ship and agrees to repair or replace under this
warranty any defective gasoline product or at-
tachment as follows from the original date of
purchase.
In Canada, contact:
Poulan PRO
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
Giving the model number, serial number and
date of purchase of your product and the name
and address of the authorized dealer from
whom it was purchased.
THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND YOU MAY HAVE OTH-
ER RIGHTS WHICH VARY FROM STATE TO
STATE.
NO CLAIMS FOR CONSEQUENTIAL OR
OTHER DAMAGES WILL BE ALLOWED,
AND THERE ARE NO OTHER EXPRESS
WARRANTIES EXCEPT THOSE EX-
PRESSLY STIPULATED HEREIN.
SOME STATES DO NOT ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS OR THE EXCLUSION OR
LIMITATIONS OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES, SO THE ABOVE LIM-
ITATIONS OR EXCLUSION MAY NOT APPLY
TO YOU.
This is a limited warranty within the meaning of
that term as defined in the Magnuson--Moss Act
of 1975.
2 YEARS - Parts and Labor, when used for
household purposes.
90 DAYS - Parts and Labor, when used for
commercial, professional, or income producing
purposes.
30 DAYS - Parts and Labor, if used for rental
purposes.
This warranty is not transferable and does not
cover damage or liability caused by improper
handling, improper maintenance or alteration, or
the use of accessories and/or attachments not
specifically recommended by Poulan PRO for
this tool. This warranty does not cover parts that
will wear and require replacement with reason-
able use during the warranty period. This war-
ranty does not cover pre--delivery setup or nor-
mal adjustments explained in the instruction
manual. This warranty does not cover trans-
portation costs.
The policy of Poulan PRO is to continuously
improve its products. Therefore, Poulan
PRO reserves the right to change, modify, or
discontinue models, designs, specifications,
and accessories of all products at any time
without notice or obligation to any purchaser.
In the event you have a claim under this warran-
ty, you must return the product to an authorized
service dealer.
Should you have any unanswered questions
concerning this warranty, please contact:
Poulan PRO, a division of Husqvarna
Consumer Outdoor Products N.A., Inc.
7349 Statesville Road
Charlotte, NC 28269
1--800--554--6723
-- 7 --
Download from Www.Somanuals.com. All Manuals Search And Download.
|