User’s Guide for Polycom® HDX®
Room Systems
Version 3.0.3 | October 2011 | 3725-23978-010/A
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using the Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Powering the System On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Power On Self Test (POST) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Answering a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Adjusting Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Showing Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Showing Content from a Computer Connected Directly to
the HDX System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Polycom, Inc.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Polycom HDX 9004, Polycom HDX 9002, and
Searching the Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Directory Groups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Contacts with Presence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Including Multiple Sites in Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Logging In and Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Using a Polycom SoundStation® IP 7000 Conference Phone
Using Microsoft Office Communications Server or
Viewing Microsoft Office Communications Server or
Multipoint Calls Using Centralized Conferencing Control
Protocol (CCCP) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Polycom Solution Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
iv
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom® HDX® Room Systems
Version 3.0.3
This guide includes overview information that you might find helpful when
you’re just starting to learn about video conferencing or when you have
experience, but you need a quick refresher.
Polycom® HDX® systems can be customized to show only those options used in
your organization. Therefore, this guide might cover options that you cannot access
on your system. To find out more about these options, please talk to the
administrator of your Polycom HDX system.
This guide covers instructions for the following models:
Polycom HDX 8000 Series, Polycom
HDX 7000 Series, and Polycom
Polycom HDX 9000 Series
HDX 6000 Series
Polycom, Inc.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Using the Remote Control
You use the remote control to place calls, adjust the volume, navigate screens,
and select options.
Press to power the system on; hold to power
off; can be set so that you press to wake the
system or put it to sleep
Access onscreen help; see system
status in a call
Store or recall camera presets
(when followed by a number);
delete all camera presets
View button presses and various menus
Select a camera or other video source
Start and stop sending content to far sites
Cycle through display layouts
Select a far-site camera or video
source
Confirm your current selection; perform
functions on highlighted items
Navigate through menus
Increase or decrease the sound you
hear from the far sites
Zoom the camera in or out
Select a near-site camera or video
source
Mute the microphone audio you’re sending
to the far sites
Return to the Home screen
Return to the previous screen
View or manage directory entries
End a call
Place or answer a call
Display the onscreen keyboard to
enter text
Delete letters or numbers
Display menu of optional features
Enter letters or numbers; move the camera
to a stored preset position
Press once for a dot, twice for a
colon, three times for an asterisk
Control a programmed recording device or
Polycom RSS™ server
2
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Powering the System On and Off
Caution. In order to avoid corrupting the file system, always power off a Polycom
HDX system using the power button on the system or the remote control. After
turning the power off in this way, wait at least 15 seconds before you unplug the
system from its power source. This helps ensure that the system powers off
correctly.
To power on the Polycom HDX system, do one of the following:
•
•
Press the
power button on the remote control.
Press the power switch on the front of the system.
The Polycom splash screen is displayed within about 10 seconds.
To power off the Polycom HDX system, do one of the following:
•
•
Press and hold the
power button on the remote control for 2 seconds.
Press and hold the power switch on the front of the system for 2 seconds.
After turning the power off in this way, wait at least 15 seconds before you
unplug the system from its power source.
Power On Self Test (POST)
After the splash screen is displayed, the HDX system automatically performs
system health checks every time the system starts. As each check begins, a
message appears on Monitor 1.
If a test fails, press
Hangup on the remote control to continue the startup
process. However, even if the system appears to start up, Polycom
recommends that you contact Technical Support before using your HDX
system if any of the system tests fail.
Calling and Answering
Answering a Call
The way a Polycom HDX system handles incoming calls depends on how it is
configured. It either answers the call automatically, rejects the call
automatically, or prompts you to answer the call manually.
To answer the call manually:
>> Press
Call or select Yes using the remote control.
Polycom, Inc.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Placing a Call
You can use your system to place a video call in any of these ways:
•
•
Entering a name or number on the Place a Call screen.
Choosing a site from:
— Recent Calls list
— Favorites screen
— Speed Dial
— Directory
•
Calling into a scheduled meeting from the Calendar screen.
Calling by Entering a Name or Number
To place a call by entering a name or number:
1
2
From the Home screen select Place a Call, or start entering numbers with
the remote control to go to the Place a Call screen if it is enabled on your
system.
In the dialing field, enter the dialing information. Depending on the
capabilities of your system and the system you are calling, the dialing
information could look like one of these examples:
— 10.11.12.13 (IPv4 address—include the dots)
— 1b11:22ad:333a:444b:5cc5:66d6:e777:88f8 (IPv6 address—include the
colons)
— 2555 (E.164 extension for H.323 or SIP)
— stereo.polycom.com (DNS name)
— 19782922854 (ISDN or phone number)
— [email protected] (SIP)
To enter letters, press
Keyboard on the remote control.
To delete a number, press
Delete on the remote control.
3
Enter any additional information needed for the call. The available
settings depend on the type of call and your system’s configuration. Not
all calls require these settings:
— Call Quality – Specify the call rate or call type for this call. For most
calls, choose Auto to let the system determine the best quality for the
call. For audio-only calls, you might need to set this to Phone.
— Second ISDN number – Use two numbers only when the person you
are calling instructs you to do so.
4
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
— Extension – If you need to dial an extension (E.164 address), enter the
extension in the second entry field. If your system is not configured
with a second entry field, you can enter the extension when the
gateway prompts you. You can also specify characters in the dial
string as instructed by the system administrator.
4
Press
Call on the remote control to place the call.
Call progress indicators appear on the HDX system monitor to show that
the call is in progress. When the indicators turn green, the call is
connected.
For more information about using the Place a Call screen, refer to Types of
Calling from the Recent Calls List
If your system administrator has allowed access to Recent Calls, you can
choose a number to call from a list of the sites you have called recently. The
Recent Calls screen provides details of all incoming and outgoing calls,
including the time of the calls.
To place a call from the Recent Calls screen:
1
2
Select Recent Calls from the Home screen.
Scroll to the entry you want to call and press
reference number that appears next to the entry to place the call.
Call, or press the
You can filter the list by placed or received calls by selecting Options > Sort
Options.
To see more details about a call listed on the Recent Calls screen, highlight the
call and press
Info on the remote control.
Calling from the Favorites Screen
You might be able to see a list of Contacts on the Favorites screen.
To place a call from the Favorites screen:
1
2
Select Favorites from the Home screen.
Highlight the contact you want to call and press
reference number that appears next to the contact to place the call.
Call, or press the
Polycom, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Calling a Speed Dial Entry
Your system administrator might have configured Speed Dial buttons on the
Home screen.
To place a call to a Speed Dial entry:
1
2
Highlight the speed dial entry you want to call on the Home screen.
Press Call to place the call.
Contact your administrator for information about speed dial entries.
Calling from the Directory
The directory can include a list of sites stored locally on the Polycom HDX
system. If the system is registered with a global directory, the directory
includes entries from the global directory.
To place a call from the directory:
1
2
3
4
Press
Directory on the remote control.
Open a specific group folder to find the entry you want to call.
Highlight the entry to call.
Press
Call to place the call.
Depending on your system configuration, when you make a call using an entry with
both ISDN and IP dialing information, the system might prompt you to choose which
way to place the call.
Calling from the Calendar
If your HDX system is configured to connect to the Microsoft Exchange Server,
and the Polycom Conferencing for Microsoft Outlook add-in is installed at
your site, you can join a scheduled meeting from the Calendar screen. If the
Calendar screen is blank, the system is not connected to the Microsoft
Exchange Server or no meetings are scheduled.
To join a scheduled meeting from the Calendar screen:
1
Go to the Calendar screen.
— Select Calendar on the Home screen.
— Select System > Utilities > Calendar from the Home screen.
— Press the Option button on the remote control and select Calendar.
Find a meeting scheduled with the Polycom Conferencing Add-In for
2
3
Microsoft Outlook, which is indicated with
on the Calendar screen.
Select Join Now to call into the meeting.
6
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
For more information about the Microsoft Exchange Server and the Polycom
Conferencing Add-In for Microsoft Outlook, refer to Using Polycom
Ending a Call
To hang up from a call:
1
2
Press
Hang Up on the remote control.
If prompted, confirm that you want to hang up.
In video calls, if you don’t confirm that you want to hang up, the system disconnects
the call automatically after 60 seconds.
In audio-only calls, if the person on an analog telephone hangs up first, you need to
disconnect the Polycom HDX system from the call, just as you would hang up a
telephone receiver in a regular phone call.
Types of Video Calls You Can Make
Depending on your system configuration, you might be able to make calls
using ISDN, H.323, SIP, or V.35/RS-449/RS-530. You can place an audio-only
call from Polycom HDX systems that have Analog Phone or Voice Over ISDN
enabled.
The following table lists some possible call combinations.
From...
You can call...
By dialing...
ISDN
ISDN
IP
Phone number
Phone number of the far-site gateway
and the extension (E.164 address) of the
far site.
Enter the extension after the gateway
number or wait until the gateway
prompts you for the extension.
Polycom, Inc.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
From...
LAN
You can call...
By dialing...
Networked and Public
Sites
SIP URI, E.164 address, DNS name, or
IP address.
Protected and Private
Sites
Typically, the far site's gateway number
then the number of the far-site system.
Consult with the far site about the best
method for placing the call.
ISDN
Depending on the H.323 gatekeeper or
SIP server, the access code of the
near-site gateway, the speed code, and
the ISDN number of the far site. Contact
your system administrator for more
information.
Points to note about special dialing scenarios:
•
When you call an IP system through a gateway that requires an extension
(E.164 address), enter the extension in the dialing field whenever possible.
Check with your network administrator for the extension delimiter you need to
enter into the dialing field. For example, some networks use ## to separate the
extension from the IP address.
•
When you include the extension, you are prompted to save both the number and
the extension in the directory when the call ends. If you enter the extension after
the gateway connects, you can save only the gateway number when the call
ends.
•
•
To place a call within your PBX system, enter the internal extension instead of
the full number.
If you need to insert a pause, add one comma in the dial string for each second
you want the system to pause.
Participating in an Encrypted Call
If encryption is enabled on the system, a locked padlock icon appears on the
monitor when a call is encrypted. If a call is unencrypted, an unlocked padlock
appears on the monitor.
•
•
If you are in a point-to-point call or a multipoint call hosted by another
system, the padlock icon displays the state of your individual connection.
If you are hosting a multipoint call, the padlock icon displays the
combined state of all connections: encrypted if all connections in the call
are encrypted, unencrypted if one or more connections in the call are not
encrypted.
In one call, some connections might be encrypted while others are not. The
padlock icon might not accurately indicate whether the call is encrypted if the
call is cascaded or includes an audio-only endpoint. If encryption is required
8
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
on your system, the far end must support encryption or the call will not be
completed. To avoid security risks, Polycom recommends that all participants
communicate the state of their padlock icons verbally at the beginning of a call.
Controlling What You See
Selecting and Adjusting a Camera or Other Video Source
You can use the remote control to select and adjust the main camera or other
near-site or far-site video sources, such as document cameras, computers,
VCRs, or DVD players.You might be able to adjust other auxiliary cameras or
far-site cameras that support pan, tilt, and zoom movement.
You can adjust the far-site camera only if it is configured at the far site to allow you
to control it.
To select a near-site or far-site camera, or other video source:
1
If you are in a call, press
control to select either near-site or far-site control.
Near or
Far on the remote
This onscreen icon indicates that you have selected
a near-site camera or video source.
This onscreen icon indicates that you have selected
a far-site camera or video source.
2
Press
Camera on the remote control. Then select the camera or other
video source you want to use.
Polycom, Inc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To adjust a Polycom EagleEye HD, Polycom EagleEye II, Polycom EagleEye 1080,
Polycom EagleEye III, or Polycom EagleEye Director camera using the remote
control:
1
Select either a near-site or far-site video source to control. During a
multipoint call being hosted by a system in the call, you can only adjust a
camera at the far site that is currently speaking.
If you are using an EagleEye Director camera and camera tracking is on, you must
turn camera tracking off before adjusting the camera.
2
3
Press the arrow buttons on the remote control to move the camera up,
down, left, or right.
Press
Zoom on the remote control to zoom out or in.
To adjust a Polycom EagleEye View camera:
>> Manually swivel the camera right, left, up, or down to frame the view.
>> Turn the focus wheel to adjust the focus.
>> Select the camera, and then press
Zoom on the remote control to zoom
out or in.
If you zoom in, you can pan or tilt the camera electronically by pressing
the arrow buttons.
10
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To open or close the privacy shutter on the Polycom EagleEye View camera:
>> Move the slider to the right to close the privacy shutter, or to the left to
open it. You can still make and receive calls when the shutter is closed, but
the people at the far site cannot see you.
Starting and Stopping Camera Tracking with EagleEye Director
If EagleEye Director tracking is enabled, the tracking camera follows the
person or people who are speaking. You can start and stop EagleEye Director
camera tracking.
To start camera tracking:
>> Press the
Option button on the remote control and select Start
Camera Tracking.
To stop camera tracking:
>> Press the
Camera Tracking.
Camera tracking can also start or stop based on the following actions:
Option button on the remote control and select Stop
•
•
•
Camera tracking starts automatically when you make a call.
Camera tracking stops once you hang up a call.
Camera tracking temporarily stops when you mute the HDX system. It
resumes when you unmute the HDX system.
Polycom, Inc.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Setting and Using Camera Presets
Camera presets are stored camera positions that you can create ahead of time
or during a call.
Presets allow you to:
•
•
Quickly point a camera at pre-defined locations in a room.
Select a video source such as a VCR or DVD player, a document camera,
or an auxiliary camera.
If your system’s camera supports pan, tilt, and zoom movement, you can
create up to 100 preset camera positions (0-99) for the near site. Each preset
stores the camera number, its zoom level, and the direction it points. These
presets remain in effect until you delete or change them.
If far-site camera control is allowed, you can create up to 16 presets (0-15) for
the far-site camera. These presets are saved only for the duration of the call.
You might also be able to use presets that were created at the far site to control
the far-site camera.
To move the camera to a stored preset:
1
2
If a call is connected, press
remote control , and then choose a near-site or far-site camera.
Near or
Far on the
Press a number on the remote control. Depending on how your system is
configured, you might need to press
number.
Preset before you press a
To view your near-site presets:
>> Press Preset on the remote control.
Icons for presets 0-9 are shown on the screen. The colored icons indicate
stored camera positions, and the gray icons indicate unassigned presets.
To store a preset:
1
If you are in a call, press
Near or
Far on the remote
control , and then choose a near-site or far-site camera or other video
source.
2
With the camera in the desired position, press and hold a number to store
the preset position. To store a double-digit preset, press the first digit
quickly and hold the second number down. Any existing preset stored at
the number you enter is replaced. Depending on how your system is
configured, you might need to press
number.
Preset before you press a
The system uses preset 0 as the default camera position.
12
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To delete all presets:
1
If you are in a call, press
video source.
Near, and then choose a near-site
2
3
Press
Preset on the remote control.
Press and hold
Delete to delete all presets.
You cannot delete just one preset. Instead, overwrite an existing preset with the
new camera position.
Switching Between Full-Screen Video and the Home Screen
When the call connects, the system automatically shows video on the whole
screen. You can switch back to the home screen during a call if, for example,
you need to adjust a user setting, and your system is configured to allow you
to do so.
To see video in the full screen:
>> Press
Near on the remote control.
To see the Home screen:
>> Press
Home on the remote control.
Enabling Dual Monitor Emulation
If your system administrator has allowed access to user settings, you might be
able to set your system for Dual Monitor Emulation (also called split-screen
viewing). With Dual Monitor Emulation, you can display multiple windows
on one monitor.
To enable Dual Monitor Emulation:
1
2
3
4
Select System from the Home screen.
Select User Settings from the System screen.
Select
Next to see more settings.
Scroll to Dual Monitor Emulation and press
enable the option.
on the remote control to
5
Press
Home to save your change and return to the Home screen.
Polycom, Inc.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
During calls using Dual Monitor Emulation without content, you can press the
Display button on the remote control to scroll through the following
screen layouts:
1 Near and far sites, same size, side by side
2 Far site big, near site small
3 Near site big, far site small
4 Near site full screen
5 Far site full screen
The last layout viewed is used for the next call.
14
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
During calls using Dual Monitor Emulation with content, you can press the
Display button on the remote control to scroll through the following
screen layouts:
1 Content big, far and near sites small
2 Content big, far site small
3 Content and far site same size
4 Content full screen
Polycom HDX 9006, Polycom HDX 8000 series and Polycom HDX 7000 series
systems with Hardware Version B, Polycom HDX 7000 series systems with
Hardware Version C, and Polycom HDX 6000 series systems show only two
windows in Dual Monitor Emulation.
Showing, Moving, and Turning Off the PIP
Your system might be configured to display a Picture-in-Picture (PIP)
window. During a call on a single-monitor system, the PIP displays what your
main camera is sending to the far site. If the far site shows any type of content,
the content appears in the main part of the screen, and the PIP changes to show
the people at the far site.
During a call on a dual-monitor system, what you see on each monitor and in
the PIP depends on how the Polycom HDX system has been configured.
Polycom, Inc.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To show, move, or turn off the PIP during a call:
•
•
Press
Display on the remote control to display the PIP on screen.
While the PIP has a yellow border, press
it to different corners of the screen.
Display repeatedly to move
•
After a brief pause, the PIP border turns blue. Then, press
turn the PIP off.
Display to
To swap the views shown in the PIP and the main screen:
1
If the PIP is not showing, press
display the PIP on screen.
Display on the remote control to
2
Press
Camera and select the
Swap PIP icon.
Specifying When to Display the PIP
Your system might be configured with specific default behavior for the PIP in
calls. If your system administrator has allowed access to user settings, you can
show, move, or hide the PIP as needed after a call connects.
To specify when to display the PIP:
1
2
3
4
Select System from the Home screen.
Select User Settings from the System screen.
Select
Next to see more settings.
Scroll to PIP, press
, and select one of these settings:
Select this setting...
To show the PIP...
Camera
On
When you press any of the camera control buttons.
On connection and during the call.
Off
Only when you press
Display on the remote control.
5
Press
Home to save your change and return to the Home screen.
16
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Controlling What You Hear
Adjusting Volume
You can raise or lower the volume of the meeting. Changing the volume affects
only the sound you hear at your site.
To adjust the volume:
•
•
Press
Volume on the remote control.
Press and hold
Volume on the remote control to quickly increase or
decrease the near-site volume.
Muting the Microphone
You can mute the microphone if you do not want the far site to hear you.
To mute or unmute the microphone:
>> Press
Mute on the remote control.
If a Polycom tabletop microphone array is connected to your system, you can
also mute the call by pressing on the microphone.
The indicators on the microphone are red when your audio is muted. The
near-site mute icon also appears on the display.
Points to note about muting the microphone:
•
Muting the microphone mutes audio coming from auxiliary audio inputs on
Polycom HDX 7000 series, Polycom HDX 8000 series, and Polycom HDX 9000
series.
•
•
•
Muting the microphone does not mute audio coming from any device connected
to the VCR or content audio inputs.
The microphone might automatically mute when the system is asleep or is
waiting for you to log in.
The red mute indicator on the front of the Polycom EagleEye View camera is lit
when the system is muted or when a Polycom microphone is connected and
muted.
•
The microphone might automatically mute when the system automatically
answers an incoming call.
Polycom, Inc.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Enjoying Stereo Audio in Video Calls
If your video conferencing room is configured to use stereo sound, the left and
right microphone inputs are configured during system setup. It is important
that you do not move the microphones as this might detract from the stereo
audio experience.
Stereo audio is only available in video calls of 256 kbps or higher.
Showing Content
Depending on how your system is configured, you might be able to show
content that is stored on a computer. When you show content, the far site can
see you and what you see on the computer screen.
You might be able to show the following to the far sites:
•
Any information stored on a computer
•
•
•
Real-time annotations made using the Polycom UC Board™
A paper document or object placed on a document camera
A videotape or DVD
You can show one content source and one people video source at a time, and
you can switch to a different type of content or people video source if you need
to. Participants at other sites can also show content or people video sources.
When you are showing content, the
content icon appears on your main
monitor. Whether you also see the content on your monitor or projector
depends on how your system was configured.
Showing Content with People+Content™ IP
People+Content™ IP allows you to send content from a computer that is not
connected directly to the Polycom HDX system.
Points to note about People+Content IP:
•
•
People+Content IP provides video-only content. No audio is shared.
People+Content IP supports any computer desktop resolution with color set to
16-bit or higher.
•
•
Your computer resolution can be set to anything, but People+Content IP scales
the image to 1024x768 or 1280x720.
The People+Content IP application must be installed on a computer.
18
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To install People+Content IP on a computer:
1
On a computer with a Microsoft® Windows XP, Windows Vista, or
Windows 7 operating system, open a web browser and go to
2
Download and install the People+Content IP software.
To start showing content:
1
2
On the computer, start the Polycom People+Content IP application.
Enter the IP address or host name of the Polycom HDX system and the
meeting password, if one is set.
3
4
On the computer, click Connect.
Open the content you want to show, and click
in People+Content IP.
To stop showing content:
1
If the People+Content IP toolbar is minimized, maximize it by clicking
the icon in the task bar.
2
Click
computer input.
in People+Content IP or press
Camera and deselect the
To keep the call secure, content is automatically stopped when a participant joins
the call.
Showing Content from a Computer Connected Directly to
the HDX System
Before you show content, check that the computer video output is configured
to use one of these supported resolutions and refresh rates.
Polycom HDX 9006, Polycom HDX 8000 series, Polycom
HDX 7000 series, and Polycom HDX 6000 series systems
Resolution
640 x 480
800 x 600
1024 x 768
1280 x 720
1280 x 960
Refresh rates (Hz)
60, 72, 75, 85
60, 72, 75
60, 70, 75
50, 60
60
Polycom, Inc.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Resolution
Refresh rates (Hz)
1280 x 1024
1680 x 1050
1920 x 1080
60, 75
60
60
Polycom HDX 9004, Polycom HDX 9002, and
Polycom HDX 9001systems
Resolution
640 x 480
Refresh rates (Hz)
60, 72, 75
60, 72, 75
60, 70, 75
50, 60
800 x 600
1024 x 768
1280 x 720
1280 x 1024
60
The way you set the resolution and refresh rate differs, depending on the type of
operating system you have. Check your computer’s manual or help topics for the
appropriate steps.
To start showing content:
1
Make sure the computer is powered on and connected to the Polycom
HDX system.
Polycom HDX 9004: You can connect a computer to video input 4 or 5.
When you connect to video input 4, you can also connect to audio input 4
to share sound from your computer.
Polycom HDX 9002, Polycom HDX 9001: You can connect a computer to
video input 4.
Polycom HDX 9006 or Polycom HDX 8000 series: You can connect a
computer to video input 4. You can also connect to audio input 4 to share
sound from your computer.
Polycom HDX 7000 series: You can connect a computer to video input 3.
You can also connect to audio input 3 to share sound from your computer.
Polycom HDX 6000 series: You can connect a computer to video input 2.
You can also connect to the audio input to share sound from your
computer.
20
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
2
Press
the computer input.
Content on the remote control or press
Camera and select
Audio from the content input is muted unless the content input is selected
as a video source.
To stop showing content:
>> Press Content on the remote control or press
deselect the computer input.
Camera and
Showing Content from a Document Camera, VCR, or DVD Player
Depending on how your system is configured, you might be able to show
different types of information to other sites in a call, such as through a
document camera, VCR, or DVD player.
Before the call begins:
•
Make sure the document camera, VCR, or DVD player is connected and
powered on. Refer to the setup sheet that came with your system.
•
Position your document or object in the document camera or insert the
videotape or DVD.
To start showing a document, object, videotape, or DVD in a call:
1
2
3
Press
Select a content source.
Press on the remote control.
Camera on the remote control.
To stop showing a document, object, videotape, or DVD in a call:
1
2
3
Press
Select the main camera.
Press on the remote control.
Camera on the remote control.
Polycom, Inc.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Showing Content with Polycom People on Content™
The Polycom People on Content™ feature allows you to show yourself on top
of content that you are sharing. The effect is similar to a weather newscast on
television.
Contact your administrator for information about enabling or configuring
People on Content.
Follow these guidelines when you are presenting content with People on
Content:
•
•
•
•
Wear solid neutral-colored clothes.
Avoid wearing black, white, or the color of your background.
Make sure that the room is well lit.
Stand about 3 feet in front of the background to avoid casting shadows
on it.
To show content with People on Content:
1
2
3
Make sure that the content you want to show is ready.
Press Option on the remote control.
Select People on Content.
The icons for the foreground and background video sources move up
slightly on the screen. The camera moves to the preset location. Content is
displayed in place of the background.
The foreground and background video sources are configured by the
administrator. You can adjust the camera or choose a different foreground
video source after you start showing content with People on Content.
To stop showing content with People on Content:
1
2
Press
Option on the remote control.
Select People on Content.
22
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Using the Polycom UC Board
By using the Polycom UC Board™ stylus and receiver with a USB hub and
either a standard whiteboard and projector or dual-monitor setup, you can
show and annotate content in real time from selected Polycom HDX systems.
Integration with HDX system software means that you do not need to start an
external application to use the UC Board.
To use the UC Board with your Polycom HDX system:
1
2
Ensure that the monitors or projector is powered on.
Tap the stylus on the content monitor (second monitor) or whiteboard, or
begin drawing with the stylus.
The following HDX systems, running software version 3.0.3 or later, support
the UC Board:
•
•
•
Polycom HDX 7000 HD system with Hardware Version C
Polycom HDX 8000 HD system with Hardware Version B
Polycom HDX 9006
For information about setting up and getting started with the UC Board, refer
to the Quick Start Guide for the Polycom® UC Board™.
Controlling Recording Devices
Depending on how your system is configured, you might be able to use the
Polycom HDX remote control to control devices such as VCRs or DVD players
that are in the room with the system. You might also be able to control a
Polycom RSS 2000 server or Polycom RMX® system. The remote control
buttons control these systems by sending audible DTMF tones across the call.
The Polycom RMX must be configured to use the default DTMF codes
assigned to the recording process. Contact your system administrator for more
information.
Working with Directory Entries and Favorites
The directory on your Polycom HDX system stores dialing information that
helps you make calls quickly and easily. When a site listed in the directory calls
your system, the system displays the name on the screen when the call comes
in. If a site that calls you is not listed in the directory, you might be prompted
to save the contact information in the directory when the call ends.
If your system is registered with a global directory server, you can see
information about other active sites that are registered with the same Global
Directory Server. These entries are stored on the Global Directory Server, and
you cannot edit them. You can, however, add a global entry to your Favorites.
Polycom, Inc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
For information about using a Microsoft Office Communications Server or
Microsoft® Lync™ Server 2010 directory or managing Microsoft Office
Communications Server or Microsoft Lync contacts, refer to Using Microsoft Office
Sites that you have added are stored on your Polycom HDX system as
Favorites. You can remove or edit Favorites. You can also assign Favorites to
groups to more easily find them. Everyone at your site who uses the system
can use the entries you create, and you can use the entries created by others.
Users at other sites cannot access the Favorites on your system.
Polycom HDX systems support up to 1,000 Favorites. They can also support
one of the following:
•
•
•
•
Up to 200 additional Favorites with presence when registered with
Microsoft Office Communications Server or Microsoft Lync Server 2010.
Up to 200 additional Favorites with presence when registered with a
Polycom Converged Management Application™ (CMA®) system.
Up to 4,000 contacts from up to 5 servers, which appear in the Global
Directory group, when registered with to Polycom GDS server.
Up to 20,000 contacts when the HDX system is registered with Microsoft
Office Communications Server 2007 or Microsoft Lync Server 2010.
Searching the Directory
1
2
3
Press
Directory on the remote control.
Open a specific group folder if you want to narrow your search results.
Enter a name in the search field by:
— Spelling the name using the number buttons on the remote control
— Spelling the name using the onscreen keyboard or by pressing
Keyboard on the remote control
Scroll through the list of names using the
Up and
Down
arrow buttons or Zoom on the remote control.
4
If the search does not start as soon as you enter a character in the search
field, select the Search button.
24
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Adding, Editing, and Deleting Favorites
You can create Contacts and groups and save them in the Polycom HDX
system directory. Any changes appear in Favorites.
To add a Contact to Favorites:
1
Press
Directory on the remote control and open the Favorites group,
or go to the Favorites screen.
2
If you have groups within Favorites, make sure that you have opened the
group where you want the new Contact to appear. To open a group,
select it. The name of the group that is open appears at the top of the
screen—for example, Directory - Favorites.
3
4
5
Select Options > Add a Contact.
Select Create Contact.
Specify the following information:
Setting
Description
Name
Name that appears in the directory list and on incoming call
messages.
Group
The group where the new Contact appears.
Call Type
Call type to use for calls to the site. Depends on the capabilities
of your system. For more information about call types, refer to
Call Speed
Number
Call speed to use for video calls to this site.
Number to use for calling the site.
Extension
The system’s extension (E.164 address).
6
7
Select Update to add each combination of call type and number that you
want to store for the site. To remove the last call type added, select Clear.
Select Save to save the entry.
To edit an entry:
You can edit any contact that was created locally.
1
Press
Directory on the remote control and open the Favorites group,
or go to the Favorites screen.
2
Open the Favorites group that contains the contact you want to edit. To
open a group, select it. The name of the group that is open appears at the
top of the screen--for example, Directory - Favorites.
3
4
Highlight the contact you want to edit.
Select Options > Edit Contact. You cannot edit a global entry.
Polycom, Inc.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
5
6
Edit the information as needed.
Select Save to save your changes.
To delete an entry:
You can delete any contact that was created locally.
1
Press
Directory on the remote control and open the Favorites group,
or go to the Favorites screen.
2
Open the Favorites group that contains the contact you want to delete. To
open a group, select it. The name of the group that is open appears at the
top of the screen--for example, Directory - Favorites.
3
4
Highlight the contact you want to delete.
Press
on the remote control or select Options > Delete Contact. If
Delete Contact is not available, you highlighted a global directory entry,
which cannot be deleted.
Points to note about deleting contacts:
•
If the contact is a member of more than one group, deleting it removes it from
the group you are viewing. If the contact was created locally and is not a
member of any other group, deleting it completely removes it from your system.
•
•
You cannot delete a contact that was found as a result of a directory search.
You cannot delete default Contacts that come from the global directory server,
except contacts stored with the Polycom CMA presence service.
To add existing contacts to Favorites from the Favorites screen:
You can add existing global or new entries to your Favorites.
1
2
3
4
5
Go to the Favorites screen.
Open the Favorites group to which you want to add contacts.
Select Options > Add a Contact to add contacts to the group.
Select Add from Directory.
Find the contact that you want to add and select it.
To add existing contacts to Favorites from the directory:
You can add existing global or local entries to your Favorites.
1
2
3
Press
Directory on the remote control.
Open the Favorites group to which you want to add contacts.
Select Options > Add a Contact to add contacts to the new group.
26
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To add a contact to Favorites from the Recent Calls screen:
1
2
3
Go to the Recent Calls screen.
Highlight the entry.
Choose Options > Add to Favorites.
Directory Groups
Grouping contacts can make them easier to find. Polycom HDX systems
support global groups and Favorites groups. Global directory entries are
assigned to a global group by your system administrator. You cannot edit or
delete global directory groups.
The Favorites group can have one level of subgroups inside of it. Any group
that you create on the Favorites screen or Directory screen is automatically
added as a subgroup under Favorites.
You can put the same contact in more than one group, and you can delete it
from one group at a time. To move a contact from one group to another, you
must delete it from the first group and add it to the second group.
Polycom HDX systems support up to 200 Favorites groups. If the system is
connected to a global directory server, it can also support one of the following:
•
Up to 64 additional groups from the Microsoft Office Communications
Server or Microsoft Lync Server 2010 directory, which appear in the
Favorites group.
•
Up to 200 additional distribution groups from a Polycom CMA system,
which appear in the Global Directory group.
Points to note about groups:
•
•
•
You cannot rename a group. To change the name of a group, delete and
recreate it.
When you place a call to a group, the system uses the call speed specified on
the Preferred Speeds screen as the preferred call speed for placing calls.
The Sample Sites group includes Loopback entries and various Polycom
regional sites that you can use to place test calls.
You can remove Sample Sites from the Directory by highlighting the group or
individual entries and pressing
on the remote.
To create a group in Favorites:
1
Press
Directory on the remote control and open the Favorites group,
or go to the Favorites screen.
Select Options > New Group.
Enter a name for the group.
2
3
Polycom, Inc.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To delete a group from Favorites:
1
2
From the Favorites or Directory screen, highlight the group name.
Press on the remote control or select Options > Delete Group.
When you delete a group, all entries in that group are deleted. If you want to keep
these entries, be sure to assign them to a new group before you delete the old
group.
To view or call a group:
From the Favorites screen or Directory screen, highlight the group name, then
do one of the following:
•
To view the contacts inside the group, press the center Select button on the
remote control.
•
To place a call to the group, press the Call button on the remote control.
Depending on how your system is configured, it attempts to call the group
using a pre-defined list of call types. Contact your system administrator
for more information.
You cannot call a group that contains another group, and you cannot call a group
that exceeds your system’s multipoint calling capability.
Refreshing Entries from the Polycom Global Directory Server
The global directory entries are periodically refreshed on systems registered to
the Polycom Global Directory Server. You can also manually refresh the global
directory entries on your system.
To manually refresh Polycom GDS entries:
1
2
3
Press
Directory on the remote control.
Select Group > Polycom GDS.
Select Options > Refresh.
28
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Contacts with Presence
If your system is automatically provisioned and registered to a global
directory server, your Favorites might include default LDAP group members
and up to 200 global Contacts stored by the presence service.
If the system is registered with a global directory, you could see the following
icons next to Contacts on the Favorites screen.
Icon
Presence
Description
Available
The system is set to Available and is registered
with a presence service.
Do Not Disturb
•
The system is set to Do Not Disturb and is
registered with a presence service.
or
•
The system is set to Available but is in a call
and is not available to receive another call.
In a Call
The system is set to Available and is registered
with a presence service. It is in a call but is
available to receive another call.
Unknown Presence
The presence state is unknown. The Contact
was created locally or is not registered with a
presence service.
Idle
The system is a desktop client that is available
but is currently idle.
Offline
The system is powered off or is offline.
You can view Contact details in the system’s local interface. Highlight the
Contact and press
speed, and group.
. A dialog appears with the display name, address, call
Including Multiple Sites in Calls
Your system might be configured to participate in multipoint calls. During a
multipoint call, multiple sites can see and hear each other. You can also share
content in a multipoint call, just as you can in a point-to-point call.
You can host multipoint calls using a video conferencing system with
multipoint capabilities, or you can use a bridge such as the Polycom
RMX 1000, Polycom RMX 2000, or Polycom MGC™.
Polycom, Inc.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Placing a Multipoint Call
How you place a multipoint call depends on whether you’re using a Polycom
HDX system with multipoint capabilities or a bridge such as the Polycom
MGC or Polycom RMX conference platform. The number of sites allowed in
the call is determined by the capabilities of the system or bridge hosting the
call. The call can include any combination of IP H.323, SIP, ISDN, V.35/Serial,
and audio-only endpoints, although some ISDN systems might not be
configured to allow mixed IP and ISDN calls. For more information about call
•
For calls hosted by a Polycom HDX system, you can define a group in the
directory to call all of the sites at one time. Alternatively, you can place a
call to the first site, and then add other sites after the first call connects. The
other sites can call the Polycom HDX system to join the call.
•
For calls hosted by a bridge, you might need to enter calling information
about all of the sites before the call begins. Contact your system
administrator for more information.
To place a multipoint call by adding sites to a call:
1
2
3
Call the first site.
When the call connects, press
Call on the remote control.
Place a call to the next site. For more information, refer to Placing a Call
4
Repeat steps 2 and 3 until all sites are connected.
To place a multipoint call using a directory group:
1
2
3
Press
Highlight a group folder in the directory list.
Press Call to place the call.
Directory on the remote control.
Depending on how your system is configured, it attempts to call the group
using a pre-defined list of call types. Contact your system administrator
for more information.
To place a cascaded multipoint call:
1
Call a group from the directory, or place calls one at a time to several
2
Ask each site to call additional sites.
30
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Passwords for Multipoint Calls
You might be required to enter a meeting password to join a multipoint call.
And you can require that far sites enter a meeting password, to prevent
unauthorized participants from joining multipoint calls hosted by your HDX
system.
•
•
If you need to generate touch tones (DTMF tones), press
on the remote
control, or press
number buttons.
and choose Touch Tones. Then use the remote control
SIP calls do not support meeting passwords. SIP endpoints calling into a
multipoint call protected by a password might not be able to join the call.
To enter a meeting password:
•
If a prompt appears on the screen, use the remote control or onscreen
keyboard to enter the password.
•
If you hear an audio prompt, use the remote control to generate DTMF
tones.
To configure a meeting password:
1
2
3
Select System from the Home screen.
Select User Settings from the System screen.
Enter the password in the Meeting Password field in one of these ways:
— Press the remote control number buttons, using the text-entry method
commonly used with cell phones.
— Press
characters.
Keyboard to use the onscreen keyboard to enter
4
Press
Home to save your change and return to the Home screen.
Multipoint Viewing Modes
What you see during a multipoint call can vary depending on how the
Polycom HDX system is configured, the number of sites participating, the
number of monitors you are using, and whether content is shared. The
multipoint viewing mode configured on the host system is the one used in the
Polycom, Inc.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
call. To find out more about these modes, please talk to the administrator of
your Polycom HDX system. The following table describes the different
multipoint viewing modes when an HDX system is hosting the multipoint call.
Setting
Description
Video images from multiple sites can be automatically combined on one monitor in
a display known as continuous presence.
Auto
The view switches between continuous presence and
full screen, depending on the interaction between the
sites.
If multiple sites are talking at the same time,
continuous presence is used. If one site speaks
uninterrupted for at least 15 seconds, that site appears
in full screen on the monitor.
Discussion
Multiple sites are displayed in continuous presence.
The current speaker’s image is highlighted.
Systems with:
See this:
Single monitor
Multiple sites, each in its own
window
Dual monitors
Speaker on second monitor with
other sites on first monitor; on the
hosting system, one far site on
each monitor
Presentation
The speaker sees continuous presence while the other
sites see the speaker in full screen on the monitor.
Systems with:
Single monitor
Dual monitors
See this:
Speaker in full screen
Speaker on the first monitor and
near site on the second monitor
Full Screen
The site that is speaking is shown in full screen to all
other sites. The current speaker sees the previous
speaker.
32
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Using Chair Control for Multipoint Calls
During some multipoint calls, you can use chair control to manage the video.
In this type of call, the chair controller can choose the site whose video is sent
to other sites in the conference. The chair controller can also disconnect a site
or end the conference. Any participant can choose to view a specific site,
request to be the broadcaster, or request to be chair controller.
Only one site at a time can be the chair controller. Before a site can become the
controller, the site with control must give up control.
The type of host for the multipoint call and the systems in the call determine
whether chair control is available.
Hosted by...
Allows chair control if...
Video Conferencing
System
The call includes:
•
Polycom HDX systems, ViewStation® EX, ViewStation
FX, VSX®, and VS4000™ systems connected by IP
H.323, ISDN H.320, or both
•
Other systems connected by ISDN H.320 only
Bridge
Allowed by the bridge
To use the chair control options when you are in a multipoint call:
1
In the browser address line, enter the HDX system’s IP address to access
its web interface.
To use the HDX web interface, you must use Internet Explorer version 6.x, 7.x, or
8.x and configure your browser to allow cookies. Enter the IP address of the HDX
https://IPaddress format. If you operate within a secure environment with the
Maximum Security Profile or Security Mode enabled, you must use the
Using the HTTPS protocol ensures that the configuration of all login information
(such as user names and passwords) are transmitted using an encrypted channel,
including those user names and passwords used to communicate with third-party
systems on your network. Using the HTTPS protocol severely limits the ability of
anyone on the network to discover these credentials.
2
3
Click Place a Call.
Click Chair Control to go to the Chair Control screen.
The Chair Control option is only available when the system is in a multipoint call. It
is not available in cascaded multipoint calls.
Polycom, Inc.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
4
Select a site from the list, and then use the controls in the web interface to
perform one of these actions:
If you are...
Chair controller
You can do this...
By selecting...
Release Chair
View Site
Pass chair control to the selected sites.
View the selected site’s video. This
remains in effect until you choose Stop
Viewing Site or you release chair
control.
Return to viewing the video selected by
the chair or by the host.
Stop Viewing Site
Send your site’s video to the other sites.
Make Me the
Broadcaster
Send the selected site’s video to the
other sites.
Select
Broadcaster
Remove the selected site from the
conference.
Disconnect Site
Disconnect all sites and end the call.
Request control of the conference.
End Conference
Acquire Chair
View Site
Participant
View the selected site’s video. This does
not change what other sites see.
Return to viewing the video selected by
the chair or the host.
Stop Viewing Site
Changing the Way Calls Are Answered
Temporarily Refusing Calls
If your system administrator has allowed access to the Availability Control,
you can automatically refuse incoming calls if you do not wish to be disturbed.
Callers get a message that the call was rejected, and you receive no notification
about incoming calls. You can, however, make outgoing calls.
To temporarily refuse incoming calls:
Do Not Disturb
>> On the Home screen, set the Availability Control to Do Not Disturb.
34
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Answering Video Calls Automatically
If your system administrator has allowed access to user settings, you can
specify whether to answer video calls automatically or to have the system
announce incoming video calls and wait for you to answer manually.
Automatically answering calls is convenient, but it can create security issues. An
unexpected caller could interrupt a meeting in progress or look at equipment and
notes left in an empty room.
To automatically answer video calls:
1
2
3
Select System from the Home screen.
Select User Settings from the System screen.
If you want to automatically answer incoming point-to-point video calls,
set Auto Answer Point-to-Point Video to Yes.
4
5
If you want to automatically answer incoming multipoint video calls, set
Auto Answer Multipoint Video to Yes.
Press
Home to save your change and return to the Home screen.
Muting Automatically Answered Video Calls
If your system administrator has allowed access to user settings, you can
choose whether to mute the audio when automatically answered video calls
connect. This prevents callers from overhearing conversations or meetings.
After the call connects, you can press
Mute on the remote control when
you’re ready to unmute the microphones.
If you enable automatic muting during a call, the audio for the current meeting is not
affected.
To mute automatically answered video calls:
1
2
3
Select System from the Home screen.
Select User Settings from the System screen.
Scroll to Mute Auto Answer Calls and press
to enable the option.
on the remote control
4
Press
Home to save your change and return to the Home screen.
Polycom, Inc.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Allowing Video Display on the Web
If your system administrator has allowed access to user settings, you can
choose whether to allow viewing of the room where the system is located or
video of calls in which the system participates. You would use the Polycom
HDX web interface’s Web Director to view the room or video.
The default setting is to not allow video display. Be sure to verify whether your
system administrator wants the setting to be changed. If you enable this
setting, you might open your company’s computer system to hackers.
To allow the display of video on the web:
1
2
3
Select System from the Home screen.
Select User Settings from the System screen.
Scroll to Allow Video Display on Web and press
control to enable the option.
on the remote
4
Press
Home to save your change and return to the Home screen.
Logging In and Out
Depending on how your system is configured, you might have to log in when
the system comes out of sleep mode.
To log in:
1
When the Login screen appears, press
buttons on the remote control to enter the User ID.
Keyboard or use the number
2
Enter the account password. To enter numbers, use the number buttons
on the remote control. To enter letters, press
remote control.
Keyboard on the
3
Select
to log in.
Depending on how your system is configured, you might get locked out after
a certain number of failed login attempts. Contact your system administrator
for more information.
To log out:
>> Press
manually.
Option on the remote control and select Logout to log out
The system automatically logs out the current account when the system goes
to sleep.
36
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Using a Polycom SoundStation® IP 7000 Conference Phone
with a Polycom HDX System
When you connect a Polycom SoundStation® IP 7000 conference phone to a
Polycom HDX system, the conference phone becomes another interface to dial
audio or video calls. The conference phone operates as a microphone, and as a
speaker in audio-only calls.
For more information, refer to the SoundStation IP 7000 documentation
available on the Polycom web site.
To answer a call using a connected SoundStation IP 7000 conference phone:
>> Press the Answer soft key on the conference phone.
To place a point-to-point call using a connected SoundStation IP 7000 conference
phone:
1
Press
key.
on the conference phone and press the Video or Phone soft
2
On the conference phone keypad, enter one of these:
— The IP address (for example, 10*11*12*13) of the site you want to call
— The phone number (for example, 19784444321) of the site you want to
call
To enter letters, press the ABC soft key. To enter an asterisk, press the Video
button and then press the button on the SoundStation IP 7000 keypad
three times. To enter a dot or @ symbol, press the ABC soft key then
multiple times.
key
You can also place calls using the conference phone’s directory or the redial
key.
The indicators on the conference phone are green when the system is in a call
and audio is not muted.
To place a multipoint call using a connected SoundStation IP 7000 conference
phone:
1
2
Call the first site.
When the call connects, press the Add Video or Add Phone soft key on
the conference phone.
3
4
Place a call to the next site.
Repeat steps 2 and 3 until all sites are connected.
To control volume in a call using a connected SoundStation IP 7000 conference
phone:
>> Press the
and
keys on the conference phone to adjust the
volume of audio from the far site.
Polycom, Inc.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
You can also adjust the volume using the volume buttons on the Polycom
HDX system remote control.
To mute audio in a call using a connected SoundStation IP 7000 conference
phone:
>> Press the
Mute key on the conference phone.
You can also mute the audio using the mute button on the Polycom HDX
system remote control or on a connected Polycom HDX microphone.
The indicators on the conference phone are red when your audio is muted. The
near-site mute icon also appears on the monitor display.
To end a call using a connected SoundStation IP 7000 conference phone:
•
•
Press
on the conference phone to hang up the call.
Press the More softkey then the Manage softkey to hang up one
connection in a multipoint call.
To start or stop showing content using a connected SoundStation IP 7000
conference phone:
>> Press the Content soft key on the conference phone. Content plays from
the following input if that input is configured for Content:
— Camera 4 or Camera 5 on a Polycom HDX 9004 system
— Camera 4 on a Polycom HDX 9006, Polycom HDX 9002, Polycom HDX
9001, or Polycom HDX 8000 series system
— Camera 3 on a Polycom HDX 7000 series system
— Camera 2 on a Polycom HDX 6000 series system
Contact your system administrator for more information.
Using Polycom Conferencing for Microsoft Outlook
If your system is configured to connect to the Microsoft Exchange Server, you
see a list of the day’s meetings on the Calendar screen. If your system is not
configured to connect to the Microsoft Exchange Server, you see the standard
month-view calendar.
To view the Polycom HDX system calendar, do one of the following:
•
•
•
Select Calendar on the Home screen.
Select System > Utilities > Calendar from the Home screen.
Press the Option button on the remote control and select Calendar.
38
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To view more information about a meeting on the calendar, highlight it and
press
on the remote control. Depending on how your system is
configured, private meeting details might not be visible, and you might see
reminders displayed on the system a short time before each meeting.
If your system is configured to connect to the Microsoft Exchange Server, and
the Polycom Conferencing Add-In for Microsoft Outlook is installed at your
site, you have access to the following additional calendar features:
•
Upcoming meetings scheduled with the Polycom Conferencing Add-In
for Microsoft Outlook are indicated with on the Polycom HDX system
Calendar screen. Past meetings scheduled with the Polycom Conferencing
Add-In for Microsoft Outlook are indicated by
.
•
•
To join a meeting scheduled with the Polycom Conferencing Add-In for
Microsoft Outlook, you can select Join Now on the Polycom HDX system
without knowing the dialing information.
You can schedule a meeting using the Polycom Conferencing Add-In for
Microsoft Outlook by clicking
Microsoft Outlook toolbar.
Schedule Polycom Conference in the
Using Microsoft Office Communications Server or
Microsoft Lync Server 2010 Features with Video Calls
Depending on how your system is configured, you might be able to search a
Microsoft Office Communications Server or Microsoft® Lync™ Server 2010
directory, view a list of Microsoft OCS or Microsoft Lync contacts, see if the
contacts are online, and call them without knowing or remembering their
addresses.
Microsoft Office Communications Server and Microsoft Lync Server 2010 directory
searches only return an entry whose last name begins with your search string. First
names beginning with the search string are not returned in the results.
Managing Contacts Using Office Communicator or Microsoft Lync
Office Communicator and Microsoft Lync contacts appear on the Polycom
HDX system Favorites screen and in the Favorites group in the directory. To
add or delete Office Communicator or Microsoft Lync contacts on the Polycom
HDX system, use the Office Communicator or Microsoft Lync application. You
Polycom, Inc.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
can populate groups created locally on a Polycom HDX system with existing
Office Communicator or Microsoft Lync contacts, but those changes do not
appear on any other device.
To manage your contacts using Office Communicator or Microsoft Lync:
1
Log in to Office Communicator or Microsoft Lync with the same account
information specified in the SIP settings of your Polycom HDX system.
2
From Office Communicator or Microsoft Lync you can:
— Add and remove contacts
— Add and remove groups
— Move contacts from group to group
Changes made to contacts and groups using Office Communicator or
Microsoft Lync appear on the Polycom HDX system Favorites screen and in
the Favorites group in the directory. Polycom HDX systems support up to 200
contacts and 64 groups from Office Communicator or Microsoft Lync.
Polycom HDX systems do not support Office Communicator or Microsoft Lync
distribution list groups, which are created on the Microsoft Exchange Server and
are typically used for sending email to a group of people.
Viewing Microsoft Office Communications Server or
Microsoft Lync Server 2010 Presence States
Polycom HDX systems and Office Communicator or Microsoft Lync users in
an integrated environment use the following presence icons to indicate
presence states:
Icon
Presence State
Description
Do Not Disturb
Indicates that the HDX system or
Office Communicator or Microsoft Lync
user is set to Do Not Disturb.
In a Call
Indicates that the HDX system or
Office Communicator or Microsoft Lync
user is in one of the following states:
•
•
In a call
Accepting urgent interruptions
only
•
•
•
•
Busy
Inactive
In a Conference
In a Meeting
40
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Icon
Presence State
Description
Available
Indicates that the HDX system or
Office Communicator or Microsoft Lync
user is available.
Offline
Indicates the HDX system or Office
Communicator or Microsoft Lync user
is offline.
Presence Unknown
Indicates that the presence state of the
HDX system or Office Communicator
or Microsoft Lync user is unknown.
Multipoint Calls Using Centralized Conferencing Control
Protocol (CCCP)
If a Polycom HDX system is deployed in a Microsoft Lync Server 2010
environment and Centralized Conferencing Control Protocol (CCCP) is
enabled, you can place and participate in multipoint calls that are hosted by
Microsoft audio and video servers.
Contact your system administrator and the Polycom Unified Communications
Deployment Guide for Microsoft Environments for more information about CCCP
multipoint calling, which is referred to as Lync Conferencing in that book.
When you add a group to a CCCP conference, only the first three contacts in the
group are added to the call.
Muting in a CCCP Call
A Microsoft Lync client acting as the call organizer can mute all of the
participants in the call. You cannot unmute until the organizer unmutes the
participants unless you are designated as a presenter. If the meeting organizer
has muted your Polycom HDX system selectively, you can unmute your
system even if the organizer does not. It is important to understand that no one
else can unmute your microphone. They can only request that you unmute.
When your mute status changes due to a Microsoft Lync client organizer
muting or unmuting all of the participants, notification is displayed on the
Polycom HDX system monitor.
Polycom, Inc.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Using Avaya Network Features with Video Calls
Depending on how your system is configured, you might be able to use
Avaya® telephony network features such as call forwarding, transferring
calls, and adding additional sites in an audio-only conference.
To activate call forwarding:
1
2
Make sure that the Polycom system is not in a call.
From the Place a Call screen on the Polycom system, dial the Feature
Access Code provided by the Avaya Communication Manager
administrator, followed by the E.164 extension of the system to which
you want to forward the calls. For example, dial *22016 if *2 is the Feature
Access Code and 2016 is the system E.164.
3
Wait for confirmation beeps.
To deactivate call forwarding:
1
From the Polycom system Place a Call screen, dial the Feature Access
Code provided by the Avaya Communication Manager administrator.
For example, #2 if #2 is the Feature Access Code for disabling call
forwarding.
2
Wait for confirmation beeps.
To transfer a call:
1
2
3
While in a call, press
access the tone pad.
on your Polycom system remote control to
Press
Select to activate flash hook. The first far-site system is placed
on hold.
Wait for a dial tone, and then dial the extension of the far-site system to
which you want to transfer the call. The call connects both audio and
video between the local system and the second far-site system. The first
far-site system is still on hold.
4
Hang up the near-site system. The two far-site systems are now
connected in a call with audio and video, if the capabilities are present.
42
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To add a system to a call:
1
While in a call, press
access the tone pad.
on the Polycom system remote control to
2
3
Press
Select to activate flash hook. The far-site system is put on hold.
Wait for a dial tone, and then dial the extension of the system that you
want to add to the call.
4
Press
Select again. The call becomes an audio-only conference with
all of the systems. If the system that dialed the flash hook hangs up, the
other systems remain connected in a call with audio and video, if the
capabilities are present.
Customizing Your Workspace
You can customize what you see on the screen, depending on how your
system is configured.
Allowing the Far Site to Control Your Camera
If your system administrator has allowed access to user settings, you can allow
the far site to control your camera. Far-site participants can also set and use
presets for your camera, if their system supports this.
To allow the far site to control your camera:
1
2
3
4
Select System from the Home screen.
Select User Settings from the System screen.
Scroll to Far Control of Near Camera and press
to enable the option.
Press
Home to save your change and return to the Home screen.
Changing this setting takes effect immediately, even if a call is in progress.
Polycom, Inc.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
Displaying the Far Site’s Name When the Call Connects
If your system administrator has allowed access to user settings, you can
specify whether to display the far site’s name when the call connects and how
long to leave the name on the screen.
To specify when to display the name of the far site:
1
2
3
4
Select System from the Home screen.
Select User Settings from the System screen.
Select
Next to see more settings.
Scroll to Far Site Name Display Time, press
and select to display the far site’s name during the entire call, for a
specified time, or not at all.
on the remote control,
5
Press
Home to save your change and return to the Home screen.
Hearing Audio Confirmation When You Dial
If your system administrator has allowed access to user settings, you can set
up the system to speak each number as you enter it in the dialing entry field
on the Place a Call screen.
To enable audio confirmation:
1
2
3
4
Select System from the Home screen.
Select User Settings from the System screen.
Select
Next to see more settings.
Scroll to Keypad Audio Confirmation and press
control to enable the option.
on the remote
5
Press
Home to save your change and return to the Home screen.
Adjusting for Room Lighting
If your system administrator has allowed access to user settings, you can use
the backlight control to adjust the brightness of the video that the main camera
sends to the Polycom HDX system. Adjusting this setting can be helpful when
the room arrangement results in strong light coming from behind the people
in the picture.
Because backlight controls adjust the main camera, these controls do not make
content from a computer or a document camera appear brighter.
44
Polycom, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Guide for Polycom HDX Room Systems
To turn backlight compensation on:
1
2
3
Select System from the Home screen.
Select User Settings from the System screen.
Scroll to Backlight Compensation and press
enable the option.
on the remote control to
4
Press Home to save your change and return to the Home screen.
Polycom Solution Support
Polycom Implementation and Maintenance services provide support for
Polycom solution components only. Additional services for supported
third-party Unified Communications (UC) environments integrated with
Polycom solutions are available from Polycom Global Services and its certified
Partners. These additional services will help customers successfully design,
deploy, optimize and manage Polycom visual communications within their
UC environments.
Professional Services for Microsoft Integration is mandatory for Polycom
Conferencing for Microsoft Outlook, Microsoft Office Communications Server
and Microsoft Lync Server 2010 integrations. For additional information and
details please refer to
contact your local Polycom representative.
Polycom, Inc.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|