User Guide
®
®
Polycom SoundPoint
IP 600 SIP 1.5
Quick Reference Guide
Written by: Customer Training and Documentation (CTD)
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connect the Network and Power Source ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 2
Connect Handset/Headset ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Attach the Baseꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 3
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Key Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Using the SoundPoint IP 600 SIP Phone. . . . . . . . . . . . . . . . . 6
Place a Call ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Answer a Callꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 6
Call Hold and Resumeꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
General Key Use ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Conferencing ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 7
Transfer a Call ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8
Call Forwarding ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8
Do Not Disturbꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 8
Shared Call Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Multiple Lines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 9
Multiple Keys Per Lineꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10
Multiple Call Appearance ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 10
Shared Lines ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ ꢀ 11
Access Voice Mail. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Page ꢀ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Connect Handset/Headset
ꢀ. Connect the short, straight end of the phone cord to the handset, and the corresponding longer straight
end of the cord to the HANDSET jack on the back of the phone.
ꢁ. Connect the headset (optional accessory) to the HEADSET jack on the back of the phone.
Attach the Base
Align the two protrusions on the bracket with their
Place the cords in the recessed area above the
corresponding holes in the phone and snap them
modular jacks as shown below.
together to lock the base to the phone.
Page ꢂ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Features
Page ꢃ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Key Descriptions
Allows for hands-free communication during calls
Mutes audio transmission locally during calls
Allows users to place and receive calls through an
optionally connected headset
Line or Speed Dial keys with LED indicators
Access to local directories and call lists
Access to special services
Directories
Services
Conference
Transfer
Allows setup of a ꢂ-way local conference
Transfer of current call to third party
Dials last connected party from the phone
Places current active call in Hold state
Redial
Hold
Cancels ringing and directs incoming calls to
your voicemail (if supported)
Do Not Disturb
Messages
Menu
Place/receive text and voice messages
Access local and server features
Access local and server features
Select and Delete controls for options and
text within local menus
Page ꢄ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Using the SoundPoint IP 600 SIP Phone
Place a Call
Users can alternate between handset, headset, or hands-free by pressing the
or
keys,
or picking up the handset.
Using the Handset
ꢀ. Pick up the handset to obtain a dial tone.
ꢁ. Dial the number.
–or–
ꢀ. Dial the SIP URL/IP address (i.e., ꢀ0.ꢂ.0.ꢃꢁ, joe@ꢁ0ꢄ.ꢀ7ꢂ.ꢀ.ꢁꢃ, sip: jane@ polycom.com).
ꢁ. Press Name after obtaining the dial tone.
ꢂ. Enter the URL or IP (press * for “.” and # for “@”).
ꢃ. Press Send to complete the call.
Using the Hands-Free Speakerphone
ꢀ. Press any assigned line key,
or NewCall to obtain a dial tone with the handset on-hook.
ꢁ. Dial the number.
–or–
ꢀ. Dial by SIP, URL, or IP address.
Using the Headset
ꢀ. Press any assigned line key,
ꢁ. Dial the number.
or NewCall to get a dial tone with the headset connected.
–or–
ꢀ. Dial the SIP URL or IP address.
Note: You can dial directly from the dial pad without getting a dial tone first. Enter the number then lift
the handset, press the Dial softkey, or press the
or
keys.
Answer a Call
After answering a call, it appears on the display showing the duration and destination.
ꢀ. Pick up the handset.
–or–
ꢀ. Press
to answer with the speakerphone.
–or–
ꢀ. Press the line key with the active indicator (with the handset on the hook).
–or–
ꢀ. Press the Answer softkey (with the handset on the hook).
–or–
ꢀ. Press
to answer through your connected headset.
Do Not Disturb
Note: You can ignore incoming calls by pressing the Reject softkey or
while the phone is
ringing. Do Not Disturb remains active after the call is dropped until you toggle it off.
Page 6 of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Call Hold and Resume
Hold
ꢀ. Press
or the Hold softkey. The call is placed on hold and is indicated on the display.
ꢁ. Press the Resume softkey or the line button to retrieve the call.
Multiple Calls on Hold
You can use the arrow keys to switch between calls, then press the Resume softkey to retrieve a call when
multiple calls are on hold on a single line. An indicator appears on the display if more than two calls are on hold
on a single key. For example, “ꢁ/ꢂ” shows that this is the second call out of three calls.
The details of calls on any line key can be viewed by pressing that line key and holding it down for a few
seconds if calls are on hold on more than one line. If a line key is pressed briefly, the first call on hold on that
line is retrieved.
General Key Use
Following are tips to navigate through menus and enter data.
ꢀ. Use
and
to scroll through lists. In some lists, the
and
keys can be used as
Page Up and Page Down.
ꢁ. Use
and
to move one level down or one level back up when menus have submenus.
key to exit from any menu.
Menu
ꢂ. Press the
ꢃ. Press the
Directories
key to exit from any directory.
ꢄ. Press the number keys one or more times to enter text using the dial pad. For example, for A press 2,
for C press 222. The display title shows whether keys will generate numbers when in text entry mode.
Conferencing
You can create a conference with two other parties using the local conferencing feature. You can also create a
conference between an active call and a call that is on hold on the same line by pressing the Join softkey.
ꢀ. Place a call to the first party.
ꢁ. Press
or the Confrnc softkey to create a new call (the active call is placed on hold.
Conference
ꢂ. Dial the phone number of the second party.
–or–
ꢀ. Use the arrow keys to access speed dial numbers, missed, placed, and received call lists.
ꢁ. Press the Dial softkey.
Conference
ꢂ. Press
or the Confrnc softkey again to join the parties in the conference.
–or–
ꢀ. Press the Split softkey to put the first call on hold and keep the second call as the active call.
Note: Ending a call on the originator’s phone terminates the conference.
Page 7 of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Transfer a Call
Transfer
ꢀ. Press
during a call or the Transfer softkey. The active all is placed on hold.
ꢁ. Press the Blind softkey if you want to perform a blind transfer (without informing the party to whom you are
transferring).
ꢂ. Dial the number to which you want to transfer the call or use the arrow keys to access speed dial numbers,
missed, placed, and received call lists.
ꢃ. Press the Dial softkey.
ꢄ. Press
Transfer
or the Transfer softkey again.
Call Forwarding
You can forward calls to another extension in your location.
ꢀ. Press the Forward softkey from the phone’s idle display (select which line to forward if multiple lines
are in use).
ꢁ. Enter the number or URL to which you want to forward.
ꢂ. Press the Enable softkey.
Disable Call Forwarding
ꢀ. Press the Forward softkey from the phone’s idle display (select which line to forward if multiple lines
are in use).
ꢁ. Press the Disable softkey.
Do Not Disturb
Calls that are received while Do Not Disturb is enabled are logged in the Missed Calls list. Do Not Disturb can
be set on a line-by-line basis if multiple lines are in use.
Enable
Do Not Disturb
ꢀ. Press
to prevent the phone from ringing when there is an incoming call. A flashing X appears
beside the line indicator on the display.
Disable
ꢀ. Press
again to disable it.
Do Not Disturb
Page ꢅ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Shared Call Appearance
Multiple Lines
The SoundPoint IP 600 SIP phone supports up to six lines that can be configured for private or shared use.
Typically, the top-most line key is reserved for the principle directory number of the phone. Depending on how
your phone is configured, the display would resemble one of the examples below:
Page ꢆ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Multiple Keys Per Line
Each line on the phone can be configured to have more than one line key associated with it. In this case, the
display would look like the following:
Multiple Call Appearance
Each line on the phone can be configured to have one or more call appearances. More than one call appearance
is useful if there is an active call and an incoming call rings on the same line. In the first example on the right,
extension ꢆꢂ0ꢀ is in an outbound call with ꢆꢂ0ꢃ. The second example shows an incoming call from John Brown.
To answer the call, put the original call on hold or press the
updated on the display with the following options:
key to access the new call. Softkey labels are
•
Answer the incoming call. This places the original call on hold and refreshes the softkey labels as shown
in the third example. If more than two call appearances are in use, two appear on the display and the total
number is indicated by a counter at the bottom right corner of the display. For example, “ꢁ/ꢂ” indicated that
the highlighted call is the second one out of a total of three.
•
•
Reject the incoming call.
Forward the incoming call to another extension.
In the example, another outbound call can be placed on the same first line.
ꢀ. Press Hold during the first call.
ꢁ. Press NewCall to obtain a dial tone and a new call appearance for a second call.
Example ꢀ
Example ꢁ
Example ꢂ
Page ꢀ0 of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
User Guide
Shared Lines
A shared line is indicated by a different line icon. In the example below, the first line is private and the second line
is shared. An incoming call to that number causes both phones to ring if two phones share a line. The call can be
answered on either phone but not both. If a shared line is in use on one of the phones, it cannot be used on the
other one. The shared line icon changes to a moving icon, and the line LED turns red when it is in use remotely.
Calls on shared lines can be transferred, put on hold, or added to a conference.
Access Voice Mail
Some text is
missing hereꢀ
Received messages are indicated by a flashing Message Waiting Indicator LED on the front of the phone.
Individual line indicators reflect voice or text messages left on that line (useful if multiple lines are in use).
A stutter dial tone in place of a normal dial tone also indicates that one or more voice messages are in your
message center.
Listen to Messages
ꢀ. Press
.
Messages
ꢁ. Select Message Center.
ꢂ. Select the line you want to retrieve messages from if multiple lines are in use. The display indicates the
number of messages and their importance.
ꢃ. Press Connect to retrieve messages.
-or-
ꢀ. Press Clear to turn off the flashing LED without listening to messages.
ꢁ. Follow the voice prompts to listen to messages.
We never stop working for you.
© ꢁ006 Verizon. All Rights Reserved. UGꢀ00ꢀꢂ 0ꢀ/06
The Verizon and Verizon Business names and logos and all other names, logos, and slogans identifying Verizon’s products and services are trademarks and service marks or
registered trademarks and service marks of Verizon Trademark Services LLC or its affiliates in the United States and/or other countries. All other trademarks and service marks
are the property of their respective owners.
Page ꢀꢀ of ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
|