Polk Audio Speaker AB755c User Manual

AB555  
AB755  
AB755c  
AB855  
Instruction  
Manual  
A WORD FROM MATTHEW POLK  
PLEASE READ THIS SECTION FIRST  
Dear Music Lover,  
If you intend to do the installation yourself we assume that you possess  
some skill in the proper use of hand and power tools. You should have a  
thorough understanding of local building and fire codes and a familiarity  
with the area behind the wall or ceiling where the speakers will be  
installed.  
Thank you for purchasing Polk Audio speakers. Designing and building  
speakers is more than just a business for the people of Polk Audio –  
it is our passion. We are all dedicated to your complete satisfaction  
and delight.  
Wiring inside your walls or ceiling should be done before or in conjunc-  
tion with installation of your in-wall speakers. Wire meeting appropriate  
building and fire codes must be used. Use at least 18 gauge wire or  
heavier. Wiring is best performed by a licensed professional.  
Your new Polk speakers include the latest loudspeaker technology to  
assure outstanding performance and unmatched quality. Please take a  
moment to read through this manual for information on getting the  
greatest enjoyment from these fine instruments.  
We make a wide variety of main, center, rear channel, powered sub-  
woofer, and accessory speakers so you can assemble a complete and  
well matched high-performance surround sound system. If you would  
like more information on building the Polk system of your dreams, con-  
sult your Polk Audio dealer or call our Customer Service Department. In  
North America call (800) 377-7655, Monday through Friday, 9:00am  
through 6:00pm Eastern time.  
OPTIONS  
1.Your in-wall loudspeakers have been packaged with stylish metal  
grilles. However, if a softer or warmer appearance is desired, white  
cloth grilles are available for the AB555, AB755 and AB855 loud-  
speakers. In some installations you may find cloth grilles to be less  
obtrusive on the design of your living space than paintable metal  
grilles. Of course cloth grilles should be used with indoor installa-  
tions only.  
Sincerely,  
2.Outdoor all-weather grilles are available and required for outdoor  
installations. Since the components and hardware used in the AB  
Series of loudspeakers can withstand the elements for many years,  
the purchase of outdoor grilles will allow the AB Series of loudspeak-  
ers to perform reliably in outdoor installations. The AB Loudspeakers  
have 1) high efficiency to insure that the higher volumes necessary  
for outdoor use can be achieved with even modest amplifiers, and 2)  
high power handling to insure that they will perform reliably at the  
high levels dictated by outdoor use. The AB loudspeakers are truly at  
home indoors as well as out.  
Matthew S. Polk  
Chairman and Co-Founder  
P.S.: A wealth of information can also be found on our award-  
If you wish to order optional cloth grilles or outdoor grilles, please call  
Polk Audio at 1-800-377-7655.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4.Follow the hook-up directions included with your receiver. Strip  
1/2 inch of insulation from each of the two conductors of the wire  
to expose the bare metal and twist each into a single unfrayed  
strand. Note that one of the terminals on the rear of each speaker  
is red ( + ) and the other is black ( - ). Make certain that you con-  
nect the wire from the red terminal of your amplifier to the red  
terminal on your speaker and the wire from the black terminal of  
the amplifier to the black terminal on your speaker. Most wire  
has some indication (such as color coding, ribbing, or writing) on  
one of the two conductors to help you maintain consistency.  
FIG 5.  
Tighten rotating wall clamps to  
engage wall  
FIG 4.  
Hook up the speaker wires  
WALL CLAMP  
CENTER  
CHANNEL  
SPEAKER  
+
TECHNICAL ASSISTANCE OR SERVICE  
If, after following the hook-up directions, you experience difficulty,  
please double check all wire connections. Make sure that your electron-  
ic equipment is operating correctly by hooking up another speaker to the  
speaker output. For example, if you are not getting sound from the left  
channel speaker, connect the right channel speaker to the left output. If  
you still get no sound from that side, the problem is in your amp, receiv-  
er or source electronics. Should you isolate the problem to the speaker,  
contact the authorized Polk Audio dealer where you made your pur-  
chase. Authorized Polk Audio dealers are the best source for advice  
and assistance.  
R
+
L
+
+
-
-
+
+
CENTER  
RIGHT  
AMPLIFIER  
LEFT  
FRONT OR SURROUND  
SPEAKERS  
FRONT OR SURROUND  
SPEAKERS  
Our customer service representatives are happy to answer your  
questions and provide fast, friendly service. In North America call  
(800) 377-7655, Monday through Friday, 9:00am through 6:00pm  
Eastern time. Or you can E-Mail us at our Internet service address:  
5.After insuring that the rotating wall clamps (4 in the case of the  
AB555, 6 in the case of the AB755 and 8 in the case of the AB855)  
are flipped inwards, place the speaker into the cutout. If you have a  
level it can help you in correctly aligning the speaker to the wall.  
Tighten the mounting screws using a power screwdriver. This will  
rotate the wall clamps, securing the speaker to the wall (see Fig 6).  
Hint – on the AB755 and AB855 tighten the center mounting screws  
before the corners for the most flush fit to the wall.  
Do Not Overtighten!  
6.Install the grille on the speaker. (You should have already painted  
both the grille and frame.) Should you ever need to remove the  
grille do not use a knife to pry between the grille and speaker  
frame. Instead, insert a pointed metal tool into one of the grille per-  
forations near a corner and lift the grille free.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AB SPECIFICATIONS  
AB755 & AB755c*  
AB555  
AB855  
Driver Complement:  
Driver Complement:  
Driver Complement:  
®
1 - 5 1/4"(13.3cm) Dynamic Balance driver,  
1 - 1/2"(1.2cm) dome tweeter  
1 - 6 1/2"(16.5cm) Dynamic Balance driver,  
1 - 1"(2.5cm) Tri-laminate dome tweeter  
2 - 6 1/2"(16.5cm) Dynamic Balance driver,  
1 - 1"(2.5cm) Tri-laminate dome tweeter  
Overall Frequency Response:  
Overall Frequency Response:  
Overall Frequency Response:  
67Hz - 20kHz  
32Hz - 26kHz  
30Hz - 26kHz  
Impedance:  
Impedance:  
Impedance:  
compatible with 8 ohm outputs  
compatible with 8 ohm outputs  
compatible with 8 ohm outputs  
Recommended Amplification:  
Recommended Amplification:  
Recommended Amplification:  
20 - 100 watts/channel  
20 - 100 watts/channel  
20 - 150 watts/channel  
Efficiency (1M, 1Watt):  
Efficiency (1M, 1Watt):  
Efficiency (1M, 1Watt):  
89dB  
89dB  
89dB  
Available Finish:  
Available Finish:  
Available Finish:  
matte white (paintable)  
matte white (paintable)  
matte white (paintable)  
Overall Size:  
Overall Size:  
Overall Size:  
10" x 6 3/4" (25.4cm x 17.2cm)  
11" x 7 1/2" (27.9cm x 19cm)  
16 3/4" x 7 1/2" (42.6cm x 19cm)  
Shape:  
Shape:  
Shape:  
rectangle  
rectangle  
rectangle  
Mounting Depth:  
Mounting Depth:  
Mounting Depth:  
3 1/4" (8.3cm)  
3 1/4" (8.3cm)  
3 1/4" (8.3cm)  
Cutout Dimensions:  
Cutout Dimensions:  
Cutout Dimensions:  
8 7/8" x 5 5/8" (22.2cm x 14.3cm)  
9 3/4" x 6 1/4" (24.6cm x 15.9cm)  
15 1/2" x 6 1/4" (39.4cm x 15.9cm)  
* Feature magnetically shielded components  
Note: Specifications are subject to change without notice.  
POLK AUDIO LIMITED WARRANTY  
Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship  
for a period of five (5) years from the date of original retail purchase from a Polk Audio Authorized Dealer. However, this Warranty will automatically terminate prior to  
the expiration of the five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall here-  
inafter be referred to as “you.” To allow Polk Audio to offer the best possible warranty service, please fill out the Product Registration Card(s) and send it to the Factory,  
at the address provided on the Product Cards(s) within ten (10) days of the date of purchase.  
Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to  
the Factory at the address given on this manual. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in  
transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship  
at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except  
as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within  
a reasonable time, freight prepaid.  
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures,  
commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workman-  
ship, or service, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on  
the Product has been removed, tampered with or defaced.  
This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair  
or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use  
the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some  
states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you.  
All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts,  
so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.  
This Warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio  
clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio AuthorizedDistributors in  
such countries.  
5601 Metro Drive  
Baltimore, MD 21215 USA  
(800) 377-7655  
“Polk”, “Polk Audio”, “The Speaker Specialists” and “Dynamic Balance” are registered trademarks of Polk Investment Corporation used under license by Polk Audio Incorporated.  
RM0556-1  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Philips Cell Phone CT9A9QDRG User Manual
Philips DVR VR 739 User Manual
Philips Food Saver AZ7881 User Manual
Philips Network Card SWV5540 10 User Manual
Philips Projector Accessories SRU 7040 10 User Manual
Philips Speaker System SPA3200 17 User Manual
Philips Stereo Amplifier SDW5005O User Manual
Pioneer Stereo Amplifier CT F10 User Manual
Praktica Digital Camera D00398 User Manual
PYLE Audio Computer Monitor PLVWR950T User Manual