AB510
AB710
Instruction
Manual
A WORD FROM MATTHEW POLK
SYSTEM PLACEMENT
Dear Music Lover,
The Polk AB Series Loudspeaker Systems are designed to provide supe-
rior sonic performance without intruding on the design of your living
space. The design goals were to create open, three-dimensional sound
and smooth, accurate frequency response in an easy-to-install chassis.
Thank you for purchasing Polk Audio speakers. Designing and building
speakers is more than just a business for the people of Polk Audio –
it is our passion. We are all dedicated to your complete satisfaction
and delight.
Placement of the system in a room bears careful consideration, as the
installation is permanent. The AB510 and AB710 loudspeakers can be
mounted on almost any wall or ceiling. Keep in mind that placing the
loudspeakers at least 6-8 feet apart and away from room edges or cor-
ners will result in better stereo imaging.
Your new Polk speakers include the latest loudspeaker technology to
assure outstanding performance and unmatched quality. Please take a
moment to read through this manual for information on getting the
greatest enjoyment from these fine instruments.
We make a wide variety of main, center, rear channel, powered sub-
woofer, and accessory speakers so you can assemble a complete and
well matched high-performance surround sound system. If you would
like more information on building the Polk system of your dreams, con-
sult your Polk Audio dealer or call our Customer Service Department. In
North America call (800) 377-7655, Monday through Friday, 9:00am
through 6:00pm Eastern time.
As ceiling mounted speakers point downward and are closer to the lis-
tener than most wall-mount positions, it is sometimes advisable to use
more than one pair to get even distribution of sound. Intended uses,
ceiling height, room size, and listening position all play a part in
determining how many pairs should be used. In an average size room
with 8' ceilings we recommend using 2 pairs of ceiling-mounted
loudspeakers. Your Polk Audio dealer can help you make the right
choice for your room.
Sincerely,
If your speakers are used in an outdoor installation, the best location is
one that provides shelter from rain and other outdoor elements. The
most common and ideal location is under an eave of your house facing
downward. If you position the AB loudspeakers where water will directly
contact them, it is advisable to use a sealant or caulk between the
frame of the loudspeaker and the wall surface. This seal should prevent
water from getting behind the loudspeaker and wall surface. Do not
position the loudspeakers where water can pool on the surface of the
woofer cone or tweeter dome. This will greatly decrease your speaker’s
useful life.
Matthew S. Polk
Chairman and Co-Founder
P.S.: A wealth of information can also be found on our award-
Download from Www.Somanuals.com. All Manuals Search And Download.
Removal after Installation
If it should ever be necessary to remove the AB Series Loudspeaker
from the wall, you must first remove the loudspeaker from the baffle.
Loosen the mounting screws just enough to allow the dogs to rotate out
of the way of the chassis.
INSTALLING IN NEW CONSTRUCTION
A rough-in kit is available separately to facilitate installations in open
framed walls and ceilings. Instructions and suggestions are provided
with this kit.
TROUBLESHOOTING
1. No sound from speakers.
•Check all amplifier connections and connections to speakers.
•Make sure amp is connected to AC outlet and
switched on.
2. Distortion at very high listening levels.
•Listen at lower levels.
CLAMP WILL
ROTATE AS YOU
TIGHTEN.
•Purchase larger amplifier.
3. Not enough bass.
•Make sure speakers are in phase.
INSTALLING IN EXISTING CONSTRUCTION
TECHNICAL ASSISTANCE
If you have any questions or problems with your loudspeaker system,
please do not hesitate to contact your authorized Polk Audio dealer from
whom you purchased your loudspeakers. Your Polk Audio dealer has the
experience needed to pinpoint any problems that may exist and has easy
access to technical information from the Polk Audio factory. If you
need assistance or information on other Polk Audio loud-
speakers for your home or car, call 1-800-377-7655.
Once you have determined the exact placement of your speakers and the
templates are in position on your wall or ceiling, you are ready to cut
your mounting hole:
1.) Select locations for both of your loudspeakers.
2.) Check locations for interference from studs, pipes, wiring etc.
before cutting.
3.) Use the template (supplied in packaging) to scribe the mounting
holes.
4.) Cut mounting holes.
5.) Fish wires from amplifier (leave at least two feet slack).
6.) Secure cables to the wall, ceiling or a stud with cable tie or
tape.
7.) Make sure mounting screws are extended adequately for wall
thickness, fold clamps in towards chassis and place the baffle in
the mounting hole.
8.) Tighten all three mounting screws. Clamps will rotate into place
as you tighten.
9.) Connect the speaker wires to the pigtails with wire nuts
or solder. Use electrical tape to protect connections. Connect
pigtails to loudspeaker matching amplifier positive and negative
terminals to plus(+) and minus(-) terminals
on loudspeaker.
10.) Install the loudspeaker into the baffle with 4 supplied screws.
Install the grilles.
Download from Www.Somanuals.com. All Manuals Search And Download.
AB SPECIFICATIONS
AB510
AB710
Driver Complement:
Driver Complement:
5.25" (133mm) polymer laminate midwoofer
.5" (12mm) polymer dome tweeter
6.5" (165mm) polymer laminate midwoofer
.5" (12mm) polymer dome tweeter
Overall Size:
Overall Size:
8.125" (207mm) round
8.125" (207mm) round
Cutout Size:
Cutout Size:
7.25" (184mm) round
7.25" (184mm) round
Mounting Depth (less wall thickness):
Mounting Depth (less wall thickness):
1.525" (39mm)
3.135" (79mm)
Overall Frequency Response:
Overall Frequency Response:
60 - 20,000 Hz
40 - 20,000 Hz
-3dB Limits:
-3dB Limits:
78 - 18,000 Hz
58 - 18,000 Hz
Recommended Amplification:
Recommended Amplification:
5 - 75 watts / channel
5 - 100 watts / channel
Nominal Impedance:
Nominal Impedance:
Compatible with 8 ohm outputs
Compatible with 8 ohm outputs
Sensitivity:
Sensitivity:
88 dB @ 1 watt / 1meter
88 dB @ 1 watt / 1meter
Note: Specifications are subject to change without notice.
POLK AUDIO LIMITED WARRANTY
Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship
for a period of five (5) years from the date of original retail purchase from a Polk Audio Authorized Dealer. However, this Warranty will automatically terminate prior to
the expiration of the five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall here-
inafter be referred to as “you.” To allow Polk Audio to offer the best possible warranty service, please fill out the Product Registration Card(s) and send it to the Factory,
at the address provided on the Product Cards(s) within ten (10) days of the date of purchase.
Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to
the Factory at the address given on this manual. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in
transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship
at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except
as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within
a reasonable time, freight prepaid.
This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures,
commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workman-
ship, or service, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on
the Product has been removed, tampered with or defaced.
This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair
or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use
the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some
states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you.
All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts,
so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.
This Warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio
clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio AuthorizedDistributors in
such countries.
5601 Metro Drive
Baltimore, MD 21215 USA
(800) 377-7655
“Polk”, “Polk Audio”, “The Speaker Specialists” and “Dynamic Balance” are registered trademarks of Polk Investment Corporation used under license by Polk Audio Incorporated.
RM0451-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|