Polk Audio Car Satellite Radio System SRH1000 User Manual

User’s Guide  
The Best  
Radio  
On Radio.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
2
3
Introduction  
27  
Memory (MEMO) &  
Song Seek (S-Seek) Functions  
Storing Artists Names,  
Song Titles & Sports Teams  
To Memory  
For Artist names Or Song Titles  
Deleting A Song Title Stored  
In Memory  
Table Of Contents  
Warning & Safety Information  
FCC Warning  
4
27  
4
4
FCC Compliance  
4
Canadian Compliance  
General Precautions  
Safety Precautions  
Copyrights & Trademarks  
Carton Contents  
Controls & Features  
Tuner  
27  
33  
5
5
7
34  
Activating The Song  
(S-Seek) Alert  
8
9
36  
36  
39  
Game Alert  
9
Instant Replay  
11  
13  
13  
13  
13  
13  
14  
14  
Remote Control  
Getting Started  
Progress Bar  
42 Menu Options  
Installation & Setup  
Introduction  
Installing Your SIRIUS Tuner  
Installation/Wiring Precautions  
Cable Interconnections  
Installing/Positioning  
The Antenna  
43  
44  
45  
45  
46  
46  
46  
SIRIUS ID  
Game Alert  
Initial Game Alert  
All Scores Updates  
Settings  
Jump Settings  
Setting The Jump Button  
To Traffic  
Setting The Jump Button  
To A Channel  
Display Options  
Confirm Tone  
Memory Options  
Audio Level  
Parental Control  
Locking Or Unlocking  
A Channel  
Changing The Lock/  
Unlock Code  
14  
14  
15  
16  
16  
Recommended Guidelines  
Connection Diagram  
Antenna Placement  
Testing Antenna Signal Strength  
Activating Your SIRIUS  
Subscription  
Creating Zones In Your Home  
The SIRIUS Satellite Radio  
Home Connect Tuner  
47  
47  
48  
48  
48  
49  
49  
17  
17  
18 Operation  
18  
19  
20  
Display Screen Information  
50  
DISP (Display) Button  
Search Modes (Category,  
Channel, Artist, Song Title)  
Searching Categories  
Searching Channels  
Direct Tuning  
Channel Presets  
Setting Channel Presets  
Recalling Channel Presets  
Jump Button  
51  
51  
51  
52  
52  
53  
53  
54  
Time-Based Features  
Clock  
20  
21  
22  
22  
22  
23  
23  
25  
25  
26  
Daylight Savings Time  
Alarm  
Program Alert  
Auto Shutdown  
Signal Indicator  
Factory Default  
56 Troubleshooting  
56 Optional Accessories  
57 Specifications  
58 Warranty  
Channel Presets (P. TUNE Mode)  
Searching For A Channel Preset  
Preset Tune List Mode  
59 For Your Records  
TABLE OF CONTENTS  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning & Safety  
Information  
FCC Warning  
This equipment may generate or use radio frequency energy. Changes or  
modifications to this equipment may cause harmful interference unless  
the modifications are expressly approved in this owners guide. The user  
could lose the authority to operate this equipment if an unauthorized  
change or modification is made.  
FCC Compliance  
This equipment has been tested and found to comply with Part 15 of the  
FCC Rules. These rules are designed to provide reasonable protection  
against harmful interference. This equipment may cause harmful interfer-  
ence to radio communications if it is not installed and used in accordance  
with these instructions. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does cause  
harmful interference to radio reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to  
correct the interference by one of more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the other equipment and the receiver.  
Connect the other equipment to a different circuit from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio technician for help.  
Canadian Compliance  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de la classe B est conforme à la norme  
NMB-003 du Canada.  
4
SR°H1000 USERS GUIDE  
WARNING & SAFETY INFORMATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General Precautions  
Liquid Crystal Precautions  
If the LCD screen on the Polk Audio Designs SIRIUS Satellite Radio  
Home Receiver is damaged, do not to touch the liquid crystal fluid.  
If any of the following situations happen, take the action indicated:  
1. If the liquid crystal fluid comes in contact with your skin,  
wipe the skin area with a cloth and then wash the skin thoroughly  
with soap and running water.  
2. If the liquid crystal fluid gets into your eye, flush the eye  
with clean water for at least 15 minutes. Seek medical care.  
3. If the liquid crystal fluid is ingested, flush your mouth thoroughly  
with water. Drink large quantities of water and induce vomiting.  
Seek medical care.  
Important Safety Instructions  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with a dry cloth.  
7. Do not block any of the ventilation openings.  
Install in accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as radiators, heat registers,  
stoves, or other apparatus (including amplifiers) that produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding type  
plug. A polarized plug has two blades with one wider than the other.  
A grounding type plug has two blades and a third grounding prong.  
The wide blade or the third prong is provided for your safety. When  
the provided plug does not fit into your outlet, consult an electrician  
for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where they exit  
from the apparatus.  
11. Only use the attachments/accessories specified by the manufacturer.  
12. Use only with a cart, stand tripod, bracket, or table specified by  
the manufacturer, or sold with the apparatus. When a cart is used,  
use caution when moving the cart/apparatus combination to avoid  
injury from tip-over.  
WARNING & SAFETY INFORMATION  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
13. Unplug this apparatus during lightning storms or when unused  
for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required  
when the apparatus has been damaged in any way, such as power  
supply cord or plug is damaged, liquid has been spilled or objects  
have fallen into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been dropped.  
6
SR°H1000 USERS GUIDE  
WARNING & SAFETY INFORMATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyrights & Trademarks  
© 2007 SIRIUS Satellite Radio Inc. All Rights Reserved.  
© 2006, Directed Electronics. All rights reserved.  
© 2005-2012 Polk Audio Designs. All Rights Reserved. No part of  
this work may be reproduced, modified, distributed or otherwise  
used without prior written permission. All trademarks referenced  
herein are the property of Polk Audio and SIRIUS Satellite Radio.  
“SIRIUS” and the SIRIUS dog logo are registered trademarks of SIRIUS  
Satellite Radio Inc. All other trademarks, service marks and logos are  
the property of their respective owners. All rights Reserved. Hardware,  
subscription and activation fee required. Hardware and subscription  
sold separately. Installation required with some equipment.  
Portions of the software on this receiver are licensed under the  
eCos License. Distribution of eCos requires that the eCos source  
code be made available to SIRIUS Satellite Radio customers. The  
eCos License and eCos source code are available to the public at:  
SIRIUS Satellite Radio reserves all rights to all receiver software not  
covered under the eCos license. This includes all portions of receiver  
software that were not distributed to SIRIUS as part of the eCos  
operating system.  
Hardware, subscription and activation fee required. For full Terms and  
to change. Not available in HI and AK. Equipment and subscription  
sold separately. Installation required with some equipment.  
Polk Audio is a Directed Electronics company which trades on  
nasdaq under the symbol deix. Investor information can be found  
Polk Audio Designs is a trademark of Britannia Investment  
Corporation used under license by Polk Audio Incorporated.  
COPYRIGHTS & TRADEMARKS  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Carton Contents  
Please unpack your SR-H1000 SIRIUS Satellite Radio Tuner carefully and  
make sure that everything shown is present. If anything is missing or  
damaged, or if your unit fails to operate, notify your dealer immediately.  
We recommend that you retain the original carton and packing materials  
in case you need to ship your receiver in the future.  
Your SR-H1000 SIRIUS Satellite Radio Tuner Carton  
Contains The Following:  
SR-H1000 SIRIUS Satellite Radio Home Tuner  
AC Power Cord  
Window Sill Antenna  
Remote Control (Two AAA Batteries Included)  
Optical Cable  
2-Connector RCA Analog Stereo Audio Cable  
Rack Mounts  
User’s Guide  
Batteries  
Online Registration Information  
Remote Control  
Home Tuner  
AC Power Cord  
RCA Audio Cables  
Window Sill Antenna  
User’s Guide  
Rack Mounts  
Optical Cable  
8
SR°H1000 USERS GUIDE  
CARTON CONTENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Features  
Tuner  
1. POWER Button. Turns the Tuner On and Off/Standby.  
2. REMOTE CONTROL RECEIVER. Receives signals from the  
wireless remote control.  
3. TUNER SELECT Button. Selects the SR-H1000 “embedded”  
tuner or any external tuner connected, provided “the external tuner”  
is connected and active. (Page 17)  
4. MENU Button. Used to access menu options to change the  
receiver setup and features.  
5. DISPLAY (DISP) Button. Changes text size of artist names and  
song titles on the display screen. In list mode, it toggles between  
channel name, artist name and song title. Pressing and holding  
this button enters the channel list mode, or will exit a list mode.  
6. JUMP Button. Jumps to a present favorite channel. Pressing  
the button again returns back to the original channel.  
7. BAND Button. Pressing and releasing this button switches between  
the preset banks, A, B, and C, which hold 10 presets each for a  
total of 30. Pressing and holding the button enables the Preset Tune  
Mode, which allows for viewing and browsing of stored presets.  
8. MEMORY (MEMO) Button (S-Seek Function). Pressing and  
releasing this button saves artist names and song titles. You can  
store up to 30 artist/song title combinations, including favorite  
teams and traffic channels. Pressing and holding the MEMO button  
will enter the recall mode, displaying the stored artist/song titles.  
CONTROLS & FEATURES  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
9. SCAN (ꢀꢁ) Buttons. Pressing this button enables the receiver  
to play each Channel/Preset in ascending order for 10 seconds.  
Scan terminates when the SCAN, CATEGORY, CHANNEL or ENTER  
button is pressed.  
10. NUMBER BUTTONS (0-10). Sets and selects preset channels.  
11. CHANNEL Buttons (ꢀꢁ). Navigates through channels and display  
screens, and highlights items on the display. Pressing the button  
increases or moves up the menus. Pressing the button decreases  
or moves down in menus.  
12. CATEGORY (CAT) Buttons (). Navigates through the Category  
List Screen which displays SIRIUS Channel Categories.  
13. ENTER Button. Press to select a Category or Channel or  
Menu setting.  
14. Display Screen. This area displays tuning and information  
about the Receiver.  
15. REWIND () Button. Pressing this button rewinds through content  
saved to Instant Replay. Pressing and releasing this button rewinds  
to the beginning of the song or program. Pressing and holding  
rewinds by timed through the saved content.  
16. PLAY/PAUSE () Button. Pauses and replays live or time-shifted  
content from the currently tuned channel. Pressing and holding  
this button displays a list of songs in the saved content.  
17. FAST FORWARD () Button. Used to fast forward through  
Instant Replay saved content. Pressing and releasing this button  
fast-forwards to the beginning of the next song or program.  
Pressing and holding this button fast-forwards through time  
the saved content.  
10  
SR°H1000 USERS GUIDE  
CONTROLS & FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls & Features  
Remote Control  
The wireless remote control supplied with the Receiver is capable of  
operating most of the features from a remote location. Each button on  
the remote control functions in the same way as the button on the  
Receiver. For a full description of a keypad button or function, refer to  
the sections in this user manual where they are described. For optimal  
operation of the remote control, always aim it toward the Remote  
Sensor on the front panel of the Receiver.  
Installing Batteries in the Remote  
Remove the battery cover.  
Install the two AAA batteries as indicated.  
Replace the battery cover.  
1. POWER Button. Turns the Receiver On and Off.  
2. CHANNEL (ꢀꢁ) Buttons. Navigates through channels  
and display screens.  
CONTROLS & FEATURES  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. CAT (CATEGORY) () Buttons. Navigates through categories  
and display screens.  
4. ENTER Button. Selects a Category or Channel or Menu setting.  
5. REWIND () Button. Pressing this button rewinds through content  
saved to Instant Replay. Pressing and releasing this button rewinds  
to the beginning of the song or program. Pressing and holding  
rewinds by timed through the saved content.  
6. FAST FORWARD () Button. Used to fast forward through  
Instant Replay saved content. Pressing and releasing this button  
fast-forwards to the beginning of the next song or program.  
Pressing and holding this button fast-forwards through time  
the saved content.  
7. PLAY/PAUSE () Button. Pauses and replays live or time-shifted  
content from the currently tuned channel. Pressing and holding  
this button displays a list of songs in the saved content.  
8. BAND Button. Pressing and releasing this button switches between  
the preset banks, A, B, and C, which hold 10 presets each for a  
total of 30. Pressing and holding the button enables the Preset Tune  
Mode, which allows for viewing and browsing of stored presets.  
9. MEMO (MEMORY) Button (S-Seek Function). Pressing and  
releasing this button saves artist names and song titles. You can  
store up to 30 artist/song title combinations, including favorite  
teams and traffic channels. Pressing and holding the MEMO button  
will enter the recall mode, displaying the stored artist/song titles.  
10. TUNER SELECT Button. Selects items highlighted n a list;  
hold-down to jump to the previously received channel. When  
not in a menu or list, pressing the SELECT Button selects the  
channel entered using the number buttons.  
11. SCAN (ꢀꢁ) Buttons. Pressing this button enables the receiver  
to play each Channel/Preset in ascending order for 10 seconds.  
Scan terminates when the SCAN, CATEGORY or CHANNEL  
button is pressed.  
12. MENU Button. Used to access menu options to change  
the Receiver setup and features.  
13. NUMBER Buttons (0-10). Sets and selects preset channels.  
14. DISP (DISPLAY) Button. Allows the user to choose one of three  
ways of presenting the Artist Name and Song Title information  
on the display screen.  
15. JUMP Button. Jumps to a preset favorite channel. Pressing  
the button again returns back to the original channel.  
16. MUTE Button. Mutes the audio of the receiver.  
12  
SR°H1000 USERS GUIDE  
CONTROLS & FEATURES  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Installation & Setup  
Introduction  
The SIRIUS Home Satellite Radio Tuner must be connected to the  
windowsill antenna (supplied) to process the SIRIUS signal. The Tuner  
recognizes and decodes the incoming SIRIUS program information and  
provides an audio signal to your stereo receiving equipment or other  
audio output equipment.  
Installing Your SIRIUS Tuner  
You can begin to enjoy SIRIUS Satellite Radio as soon as the Tuner  
installation is complete and you have initiated your SIRIUS Satellite  
Radio subscription. To set up your Tuner, using the following  
installation instructions.  
Installation/Wiring Precautions  
Make sure the power cable is not connected to an AC wall  
outlet until all interconnections have been made and verified.  
The power cable should be connected last.  
Do not install the Tuner in the locations exposed to direct sunlight  
or in areas subject to extreme temperatures.  
Incorrect installation may cause damage to the system.  
During antenna placement/installation, refer to the Antenna  
Placement procedure on page 15.  
Cabling Interconnections  
Set up your system using the diagram and by following the installation  
instructions, or enlist the help of a professional installer.  
Installing/Positioning the Antenna  
For best reception, the supplied antenna should be placed near a win-  
dow; some repositioning may be required to achieve optimum results.  
GETTING STARTED  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recommended Guidelines  
Terrestrial repeaters are located in major cities. In those areas, it may  
be possible to locate the windowsill antenna away from a window and  
still get satisfactory reception.  
You can also place the antenna outside (on a roof structure), provided  
it is clear of any overhead obstructions.  
Note: Because of the orbiting characteristics of the SIRIUS satellites,  
the strength of the SIRIUS signal may change over time. In most cases  
however, the signal should be available continuously. If you experience  
a loss of signal or audio, reposition the antenna inside your home,  
or outside as necessary.  
Connection Diagram  
14  
SR°H1000 USERS GUIDE  
GETTING STARTED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna Placement  
Consult the map for the direction in which to point the antenna. Aim the  
portion of the antenna with the logo on it toward the location indicated  
by the X on the map. To ensure strong reception in your home, observe  
the following antenna placement considerations:  
1. BEST Reception can be achieved by placing the antenna outside  
on the roof. The antenna is waterproof. This position will afford  
the best view of the sky for best reception. When placed in  
this location, an antenna extension cable may be required.  
2. BETTER Reception can be achieved by placing the antenna outside  
a window, or by mounting it to the side of the house. In either  
case, try to achieve the best possible clear view of the sky.  
3. GOOD Reception can be achieved by placing your antenna in or  
near a window, since terrestrial transmitters are used in major  
metropolitan areas to boost signal strength. In these cases, the  
antenna can be placed inside the home. Try to achieve a clear  
unobstructed view of the sky.  
Area 1: Aim East, Northeast, or Southeast  
Area 2: Aim North or Northeast  
Area 3: Aim North or Northwest  
Area 4: Aim West, Northwest or Southwest  
Area 5: Aim Straight Up  
GETTING STARTED  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Turn the Tuner on and listen for audio. If no audio is heard, aim  
the antenna in different directions until audio output is heard.  
This is the desired antenna aiming position.  
5. After determining the optimum antenna aiming position,  
turn the Tuner off, disconnect the power adapter from the  
wall outlet receptacle, and disconnect the antenna cable.  
6. Plan the routing of the antenna cable to the Tuner. Be sure you  
avoid any obstructions that could crimp, kink, or twist the cable.  
Use protective grommets wherever rough openings are encountered.  
Note: Do not cut the antenna cable.  
7. If the antenna is mounted outside, route the cable from the antenna  
position to the interior of the home, working the cable through the  
basement, under a window sill, etc., and make adjustments and  
take up slack whenever necessary.  
8. Plug the antenna cable into the ANTENNA connector on the back  
of the Receiver.  
9. Plug the tuner into a 110VAC wall receptacle. The front panel  
STANDBY LED will light red.  
10. You are now ready to activate and enjoy SIRIUS programming  
within your home.  
Testing Antenna Signal Strength  
The stronger the signal strength, the less likely it is that you will experi-  
ence an interruption of the audio. In the menu options of the Tuner  
(refer to page 53), there is an antenna aiming display which shows two  
bar graphs indicating signal strength. This can be a useful tool for posi-  
tioning the antenna in an optimal location for maximum signal reception.  
Activating Your SIRIUS Subscription  
Before you can listen to the SIRIUS service, you must subscribe  
to the SIRIUS Satellite Radio service.  
16  
SR°H1000 USERS GUIDE  
GETTING STARTED  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Make sure that the Tuner is properly connected and that  
its antenna is oriented to receive the SIRIUS satellite signal.  
2. Press the POWER button to turn the Tuner on. After displaying  
the SIRIUS logo, the Tuner will update all the SIRIUS channels.  
The display will read “UPDATING CHANNELS” on the top line  
and “X% Completed” (0%-20%40%-60%-80%-100%) on the  
bottom line until the update completes.  
Note: Don’t push any buttons or perform any operations until  
updating has been completed.  
3. Once updated and the SIRIUS channels are received, the display  
will display, “To Activate Call / 1-888-539-SIRIUS” and will place you  
in The Preview Channel. Channel 184 is SIRIUS’ preview channel.  
You will not be able to tune to any other channels until you activate  
your SIRIUS subscription.  
4. Press the MENU button to enter the “Menu Options” mode.  
The “SIRIUS ID” menu option will now be highlighted.  
5. Push the Select button to select “SIRIUS ID.” This will display  
your Tuner’s unique 12-digit SIRIUS ID Number (SID). This  
SID number should also be available on the SR-H1000 packaging.  
Write the number down and have your credit card handy. A space  
has been provided at the end of this manual to write your SID.  
Follow the prompts to activate your subscription, or you can also  
call SIRIUS toll-free at: 1-888-539-SIRIUS. You can now enjoy SIRIUS  
Satellite Radio’s digital entertainment, and can tune to other channels!  
Creating Zones In Your Home—  
The SIRIUS Satellite Radio  
Home Connect Tuner (Optional Accessory)  
The SIRIUSConnect SC-H1 Satellite Radio Tuner is an optional  
accessory designed to work with the SR-H1000 and other SIRIUS-ready  
receivers. The SC-H1 enables you to set up a zone system to receive  
different SIRIUS Satellite Radio programming in different rooms of your  
home. To connect and set up a SIRIUSConnect SC-H1 Satellite Radio  
Tuner, follow the installation guide provided with the unit, or consult  
a professional installer.  
GETTING STARTED  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Display Screen Information  
The display screen of the Polk Audio Design’s SR-H1000 Home Tuner  
provides information about the operation of the receiver, such as the cur-  
rently tuned channel, song or show being played, artist name, time and  
other information. This screen is referred to as the Default display screen  
in this manual. Figure 1 identifies the information displayed when listen-  
ing to a typical broadcast.  
Figure 1  
18  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISP (Display) Button  
Pressing and releasing the DISP button from the Default display  
screen toggles between the artist name/song title and large character  
displayed text. The large character format will change the character  
size and cause the field to scroll from right to left. This feature is  
useful when viewing the display screen from a distance. Note that  
the displayed text will scroll only if the length of the artist or title  
cannot be viewed in its entirety.  
Pressing and holding the DISP button will enter the channel list mode  
and display the channel names, and allow you to scroll through the  
channels and select another channel if desired. (Figure 4)  
If the DISP button is pressed again while in the channel list mode, the  
display will list the song titles/show names for each channel. Pressing  
the DISP button yet again will display the artist names for each channel.  
To exit the channel list mode, press and hold the DISP button.  
Figure 2  
OPERATION  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search Modes (Category, Channel, Artist, Song Title)  
The Polk Audio Design’s SIRIUS Home Tuner has four ways to search  
for and select music: by category, by channel, by artist, and by song  
title. Each search method is discussed in the sections which follow.  
Searching Categories  
If you want to browse different entertainment categories, push  
either Category () button to activate the category search screen.  
1. Use the Category buttons () to scroll through the music  
and entertainment categories.  
2. When the category you want is displayed (for example, Rock),  
use the Channel (ꢀꢁ) buttons to browse the available channels  
within the category. Pressing the DISP button while in the category  
search mode will change between Channel Name, Artist Name,  
and Song Title to enable you to preview what is playing on other  
channels before making a selection.  
3. When the channel you want is highlighted, press the ENTER button.  
The channel will be selected and the display will revert to the Default  
screen for the selected channel.  
4. To exit the category mode without changing to a new channel,  
press and hold the DISP button for one second.  
Figure 3  
20  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Searching Channels (Channel List Mode)  
It is possible to search for a different channel while listening to your  
current channel. Be sure that the display shows the Default display  
screen prior to the following steps:  
1. Press and hold the DISP button for two seconds to activate the  
channel list mode. The channel list screen be displayed, showing  
all available channels regardless of category.  
Pressing the DISP button, while in the channel list mode, will  
change between channel name, artist name, and song title. You  
can use this feature to search for a specific artist, song, or show  
that may be playing at the time.  
2. Press the CHANNEL (ꢀꢁ) buttons to locate the channel you want.  
3. Press the ENTER button to select the channel. To exit the channel  
list mode without changing to a new channel, press and hold the  
DISP button for one second.Note: If you are in the channel list  
mode and viewing a sports category channel list (NFL® Zone, NHL®  
Zone, NBA® Zone), pressing the DISP button will toggle between  
the team names and the current score of any live play-by-play game.  
Figure 4  
Press and hold the DISP button  
to enter the channel list mode.  
Press the DISP button again  
to display the artist’s names.  
Press the DISP button again  
to display the song titles.  
Press the DISP button again  
to return to the channel list.  
OPERATION  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Direct Tuning  
Channels can be directly accessed by pressing CHANNEL (ꢀꢁ) buttons  
or by using the 0-10 keys to enter the desired channel number. Then  
press ENTER to select the channel. Once the desired number has  
been entered, the channel will change and the display will revert to  
the default screen for the selected channel. The receiver will tune  
the channel immediately if three numbers are entered (for example,  
“0,””0,”“7”), but if just one or two digits are entered, the receiver  
will tune to the new channel after three seconds.  
Figure 5  
Channel Presets  
Channel presets allow you to store up to 30 of your favorite  
channels as presets for quick access with the press of a button.  
Setting Channel Presets  
Presets are stored in three banks, A, B, and C, each containing  
10 channel presets.  
1. Press the BAND button to activate the preset bank you want.  
The selected bank is shown in the lower right corner of the  
Default display screen.  
2. Select the channel you want to preset.  
3. Press and hold for two seconds the numbered preset  
button (0-10) in which you want to store the channel.  
4. The selected preset number will flash and then remain  
lit on the display to show that it has been memorized.  
If the preset button you selected already has a channel stored  
in it, the preset will be replaced with the newly stored channel.  
22  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recalling Channel Presets  
The 10 presets in the active bank (A, B, or C) can be selected  
by pressing the 0-10 buttons.  
1. Press the BAND button to activate the preset bank you want.  
The selected bank is shown in the lower right corner of the  
default display screen.  
2. Press the desired preset button 0-10 to recall the preset. The  
channel will change and the display will revert to the default  
display screen for the new channel, with the preset shown in  
the lower right corner.  
Jump Button  
The SR-H1000 Home Tuner features a special button called Jump.  
This button can be programmed to jump to a channel which is accessed  
frequently and temporarily such as traffic, weather, news, or sports.  
This button allows you to quickly tune to a specific channel and  
then tune back to the original channel by pressing the button again.  
Figure 6  
OPERATION  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Refer to the Jump Settings section in the Menu Options section  
for information on configuring the Jump button.  
If the jump button is set to Traffic, pressing the Jump button will take  
you to your stored traffic channel. If your traffic report is not immediately  
available, the band indicator on the display will change to the jump icon  
to indicate a jump is active. Once your local traffic report is ready, the  
tuner will automatically tune to your stored traffic channel. You may  
have to wait a few minutes for your desired report.  
Pressing the Jump button while the tuner is searching will cancel the  
search. Pressing the Jump button after the tuner has tuned to your  
traffic report will return to the channel to which you had been listening  
immediately prior to pressing the Jump button.  
If the jump button is set to JumpSet, pressing the Jump button will  
immediately tune to the programmed channel. Pressing the Jump  
button again will return to the channel to which you had been listening  
immediately prior to pressing the Jump button.  
Note: The jump button setting remains the same regardless  
of which preset bank is currently selected.  
24  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel Presets (P. TUNE Mode)  
Searching For A Channel Preset  
It is possible to quickly search through all of your presets using the  
CHANNEL (ꢀꢁ) buttons:  
1. Press and hold the BAND button to enter the preset tune  
mode (P.TUNE).  
2. The bottom right portion of the display will change to highlight  
the current preset number.  
3. Press the CHANNEL (ꢀꢁ) buttons to move through the presets.  
The selected preset channel will begin to play as soon as you  
stop pressing CHANNEL (ꢀꢁ) buttons.  
Only stored presets will be displayed, regardless of what bank they  
are stored in. Presets will be grouped and displayed by preset bank  
and number (for example, A-1, A-2…B-1, B-2…C-1, C-2…) and rotate  
through all the presets and return back to the beginning preset.  
To exit the preset tune mode and return to Default display screen,  
press and hold the BAND button.  
Figure 7  
OPERATION  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preset Tune List Mode  
While in the preset tune mode, you can view your list of presets  
showing channel name, artist name, or song title, just like in the  
channel list mode:  
1. Press and hold the BAND button to enter the preset tune  
mode (P. TUNE).  
2. Press the DISP button for two seconds which will bring up the  
preset tune mode displaying up to 6 preset channel names.  
3. Pressing the DISP button again while in this mode will change  
between channel name, artist name, and song title list modes.  
The name field will scroll only if the length of the artist name  
or song title cannot be viewed in its entirety.  
4. Use the CHANNEL (ꢀꢁ) buttons to select the desired preset.  
5. Press and release the ENTER button to select the preset.  
The channel will change and the display will revert to the  
P.TUNE display screen.  
Figure 8  
Press and hold the DISP button  
to enter the preset tune mode.  
Press the DISP button again  
to display the artist’s names.  
Press the DISP button again  
to display the song titles.  
Press the DISP button again  
to display the channel names.  
26  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory (MEMO) & Song Seek (S-Seek) Functions  
This feature allows you to capture and store information about the  
programming (artist, song, sports team, or traffic city) on the currently  
tuned channel, up to a total of 30 items. The receiver then continuously  
searches all the SIRIUS channels and alerts you when a match to  
a saved program is being played. When a sports team (or teams)  
are stored in memory, at the time the receiver is initially powered  
on, you will be alerted when the sports teams are playing in a game  
being broadcast. Also, while listening to your SIRIUS Tuner, should  
one of the teams begin to play a game, you will be alerted.  
Storing Artist Names, Song Titles & Sports Teams To Memory  
If you are listening to a song or other entertainment channel, or  
a sports team, and wish to save the artist, song, or sports team  
selection to memory for future S-Seek alerts, do the following:  
For Artist Names Or Song Titles  
If the currently tuned channel is a music or entertainment channel,  
momentarily press and release the MEMO button. The receiver will  
display a menu to choose to store the artist name or the song title.  
Figure 9  
OPERATION  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If either the artist name or song title is not available to save,  
the choice will be displayed as unavailable.  
Figure 10  
Press CHANNEL (ꢀꢁ) buttons to highlight Store Artist or Store  
Song (when available) and press the ENTER button to save the  
current selection to memory.  
If both the artist and song are available to save, you will be prompted  
again to save whichever one you haven’t yet saved, song title or artist  
name. If you do not wish to save, press the MEMO button to exit.  
Figure 11  
28  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Sports Games: If the current tuned channel is an NFL, NBA, NHL,  
or College play-by-play sports broadcast, momentarily press and release  
the MEMO button. The receiver will display a menu to choose which  
sports team should be saved to memory.  
Figure 12  
If either of the teams is not available to save, that team will  
be displayed as unavailable.  
Figure 13  
Press CHANNEL (ꢀꢁ) buttons to highlight the desired sports team  
(when available) and press the ENTER button to save the current  
selection to memory. The next screen will ask which kind of alert  
you wish to have.  
OPERATION  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 14  
Initial Game Alert will provide an alert when the team you have chosen  
is playing a game. All Score Updates will provide an alert when the  
team you have chosen is playing a game, and also when the scores  
are updated for the team.  
Press CHANNEL (ꢀꢁ) buttons to highlight the desired alert  
and press the ENTER button to save the selection to memory.  
Figure 15  
If both teams are available to save, you will be prompted again to  
save the other team. If you wish to save the team, follow the same  
procedure as when saving the first team. If you do not wish to save,  
press the MEMO button to exit.  
The tuner will then revert to the last active display mode.  
30  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the new alert was successfully stored in memory, an Artist/Song/Game  
Stored pop-up screen followed by an X Used/Y Empty screen will be  
displayed for one and two seconds respectively. X is the total number  
of listings stored in memory, and Y is the total number of memory  
listings still available for storage.  
Figure 16  
If the MEMO button is pressed, and all of the memory spaces are full, a  
Memory Full screen will be displayed for one second.  
Figure 17  
A Replace–Cancel screen will then be displayed which will allow  
you to choose whether to replace an existing alert stored in memory,  
or to cancel storing the alert to memory.  
Figure 18  
OPERATION  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press CHANNEL (ꢀꢁ) to select whether to replace an existing alert  
or cancel saving the alert to memory. If you choose to cancel saving  
the alert, the tuner will revert to the last active display mode.  
If you have chosen to replace an existing alert, a listing of all the  
alerts stored in memory will be displayed.  
Figure 19  
Press CHANNEL (ꢀꢁ) buttons to highlight the alert that you would  
like to replace and press the ENTER button to store the new alert. If  
the new alert was successfully stored in memory, a Artist/Song/Game  
Stored pop-up screen followed by an X Used/Y Empty screen will be  
displayed for one and two seconds respectively (Figure 16). X is the  
total number of listings stored in memory, and Y is the total number  
of memory listings still available for storage. The receiver will revert  
to the last active display mode.  
Viewing Program Information Stored In Memory  
To View The Program Information Stored In Memory:  
1. Press and hold the MEMO button for three seconds to enter  
the S-Seek mode. The program information stored in memory  
will be displayed in one-at-a-time page format.  
2. Press CHANNEL (ꢀꢁ) buttons to scroll through the listings. This  
function allows you to review previously stored program information.  
The information will be displayed as sports league or college/team  
name or artist name/song title.  
32  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 20  
Deleting A Song Title Stored In Memory  
To Delete A Song Title Stored In Memory:  
1. Press the ENTER button while in S-Seek mode. A pop-up screen  
displaying three selectable options, Song Seek On, Song Seek  
Off and Delete will be displayed.  
Figure 21  
2. Press CHANNEL (ꢀꢁ) to highlight the Delete option.  
3. Press the ENTER button and a Delete confirmation screen  
will appear.  
Figure 22  
OPERATION  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. To permanently delete the program from your list, highlight  
Yes using the CHANNEL (ꢀꢁ) button and press the ENTER  
button to confirm.  
5. A Deleted popup screen followed by an X Used/Y Empty screen  
will be displayed for one and two seconds respectively. X is the  
total number of listings stored in memory, and Y is the total number  
of memory listings still available for storage. The tuner will revert  
to the last active display mode.  
Activating The Song (S-Seek) Alert  
When S-Seek alerts are enabled, whenever the Polk Audio Design’s  
SIRIUS Home Tuner is turned on, it automatically searches the channels  
to determine if a match exists with the program information stored in  
tuner’s memory. If one or more matches are found, a pop-up screen  
momentarily appears for two seconds which displays S-Seek Alert and  
an audible beep tone will be heard indicating that a match was found.  
The display then changes to the S-Seek Alert screen which displays the  
current matches. You can select the artist/song, title, or sports game that  
you wish to listen to. (No stored match alert is provided for the currently  
tuned channel.) To ensure that no duplicate entries are stored in memo-  
ry, the tuner will check the stored data to ensure the information about  
to be stored is not already in memory.  
To Turn On S-Seek Alerts:  
1. Press and hold the MEMO button for three seconds to enter  
the S-Seek mode.  
2. Press and release the ENTER button. A pop-up screen displaying  
three selectable options, Song Seek On, Song Seek Off and  
Delete are displayed.  
Figure 23  
34  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press CHANNEL (ꢀꢁ) buttons to highlight the Seek On option.  
4. Press the ENTER button to turn on S-Seek.  
When the S-Seek option is on, when ever the tuner is turned on, it  
automatically searches the incoming channels to determine if a match  
exists with the program information stored in the S-Seek memory.  
If one or more S-Seek matches are found, a list appears (Figure 24).  
You can scroll through the list and select a program using the CHANNEL  
(ꢀꢁ) buttons. Your selection will be tuned and the display will revert  
to the last active display screen.  
Figure 24  
If a selection is not made within 10 seconds, the screen will revert  
to the last active display screen and tuning mode.  
OPERATION  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game Alert  
The Polk Audio Design’s SIRIUS Home Tuner tuner can automatically  
identify when your favorite team is playing. When a game is found,  
Game Alert is displayed and the My Game Zone screen is displayed list-  
ing the sports games which are currently being played. (Figure 25) Use  
the CATEGORY () buttons to select and tune to the desired game.  
Figure 25  
Refer to the Game Alert section in the Menu Options section for  
information on setting your favorite sports team. You can also use  
the S-Seek feature to add game alerts for additional teams. Refer  
to the Storing Artist Names, Song Titles, and Sports Teams to  
Memory section within the Memory (MEMO) and Song Seek  
(S-Seek) Functions section for more information.  
Instant Replay  
The SR-H1000 Home Receiver is capable of storing the audio of the  
channel to which you are listening for later playback, approximately up  
to 44 minutes depending upon the channel to which you are tuned. As  
soon as you tune to a channel, the tuner automatically begins storing  
the audio, enabling you to rewind at any time to replay the audio again.  
If you are unable to continue listening to a channel, but do not want  
to miss the broadcast, pressing the Play/Pause () button will cause  
the receiver to mute the audio and mark the point in the broadcast  
so you can resume listening at a later time.  
Pause/Play () Button  
When pressed, this places the tuner in the Instant Replay  
pause mode which mutes the audio.  
36  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pressing and releasing the Play/Pause () button again causes  
the tuner to begin playing the stored audio from the point at which  
the tuner was paused. During playback, the tuner will continue to  
store the live channel audio.  
Pressing and holding the Play/Pause () button changes the display  
to a listing of the artist’s names in the stored audio, from the most  
recent to the oldest, beginning with an entry called “Live.” Pressing  
the DISP button will toggle the display between the artist name list  
and the song/program title list.  
Press the CHANNEL (ꢀꢁ) button to highlight a song to play, then  
press the ENTER button to select. Live may be chosen which will  
exit the Instant Replay mode, and the receiver will resume playing  
the live broadcast.  
Figure 26  
Fast Forward () Button  
This fast forwards you through the stored audio. Pressing and releasing  
the Fast-Forward button forwards to the start of the next song or pro-  
gram in the stored audio and playback automatically begins. Repeatedly  
pressing and releasing the Fast-Forward button causes the tuner  
to continue to move forward in the stored audio to the start of each  
next song or program until the end of the stored audio is reached.  
When the end of the stored audio is reached, a beep will be heard  
(if the Confirmation Tone option is enabled), the Instant Replay mode  
will be exited, and the receiver will resume playing the live broadcast.  
Pressing and holding the Fast-Forward button for one second advances  
the playback forward in 10 second intervals, which increases to 15 and  
then 30 second intervals the longer the Fast-Forward button remains  
pressed. Playback begins immediately when the button is released.  
OPERATION  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When the end of the stored audio is reached, a beep will be heard,  
the Instant Replay mode will be exited, and the tuner will resume  
playing the live broadcast.  
Rewind () Button  
This rewinds (moves you backwards) through the stored audio.  
Pressing and releasing the Rewind button rewinds to the start of the  
current song or program in the stored audio, and playback automatically  
begins. Repeatedly pressing and releasing the Rewind button causes  
the tuner to continue to move backwards in the stored audio to the start  
of each previous song or program until the beginning of the stored audio  
is reached. If the beginning of the stored audio is reached, a beep will be  
heard (if the Confirmation Tone option is enabled) and playback will auto-  
matically begin.  
Note: Depending upon where in a particular broadcast the channel  
was selected, the start of a song or program may not be available in  
memory. If this occurs, the playback will start from where the audio  
began to be stored.  
Pressing and holding the Rewind button for one second rewinds play-  
back in 10 second intervals, which increase to 15 and then 30 second  
intervals the longer the Rewind button remains pressed. Playback begins  
immediately when the button is released. If the beginning of the stored  
audio is reached while rewinding, a beep will be heard and playback  
will automatically begin.  
Note: When the tuner is tuned to another channel, all audio stored  
in the Instant Replay memory is erased and the tuned channel begins  
to play. Tuning to another channel may automatically occur if another  
feature of the receiver has been programmed to do so.  
38  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Progress Bar  
While playing from Instant Replay memory, status information  
is shown at the bottom of the tuner’s display screen.  
Figure 27  
Play Position Indicator  
Progress Bar  
Instant Replay Time Position  
Instant Replay Mode  
The Instant Replay mode icon that is displayed at the bottom  
left of the screen indicates the current mode.  
Pause () Mode  
This indicates that the receiver is paused and muted.  
Play () Mode  
This indicates that you are in the playback mode,  
listening to stored audio.  
Fast Forward () Mode  
This indicates that you are fast forwarding through the stored audio.  
Rewind () Mode  
This indicates that you are re-winding, or moving backwards,  
through the stored audio.  
OPERATION  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Progress Bar is a visual indicator of the status of the Instant Replay  
memory. (Figure 28) As the memory fills, the Progress Bar begins  
to fill from the left side providing a visual indication of how much of  
the Instant Replay memory is filled. The end of the bar indicates the  
end of the stored audio, where the live broadcast begins. When all  
available memory has been used, the bar will be completely filled.  
Figure 28  
Progress Bar Showing  
Amount of Memory Filled  
End of Stored Audio  
Beginning of Live Broadcast  
A diamond-shaped Play Position indicator is superimposed over the  
Progress Bar which provides a visual indicator of the current playback  
position in the Instant Replay memory.  
Figure 29  
Play Position Indicator  
The Play Position indicator shows your current listening position in the  
stored audio. When you press the Play/Pause button to begin playback  
of the stored audio, this indicator will begin to move to the right showing  
the progression of the playback through the Instant Replay memory, pro-  
vided that the memory is not full.  
40  
SR°H1000 USERS GUIDE  
OPERATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 30  
Play Position Indicator  
The portion of the Progress Bar behind the Play Position indicator shows  
how much you can rewind in the Instant Replay memory, while the filled  
portion ahead of the Play Position indicator shows how much you can  
fast-forward in the memory.  
While you are in the playback mode, the tuner continues to store the  
audio from the channel. Obviously, you will be unable to “catch up” to  
the live broadcast during playback, as new audio is being stored at the  
same rate at which you are playing back the stored audio. You can use  
the Fast-Forward button to skip ahead or exit the Instant Replay mode,  
and begin listening to the live broadcast again.  
Should you press the Play/Pause button to pause the play back, the  
play position indicator will stop moving and continue to provide a visual  
indication of your current position in the Instant Replay memory.  
When paused, and the Instant Replay memory is 10 seconds from  
becoming full, two beeps will be heard (if the confirmation tone option  
is enabled). When the memory is full, the receiver will automatically  
begin playback, and will continue to store the channel audio, overwriting  
the oldest portion of the audio previously stored.  
OPERATION  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Instant Replay Time Position provides the exact amount of time  
the Play Position indicator is behind the live broadcast, expressed  
as Hours:Minutes:Seconds, and displayed as a negative number.  
Figure 31  
Play Position Indicator  
Time Position of  
Play Position Indicator  
For example, if -02:40 is displayed, this would indicate that the Play  
Position indicator is 2 minutes and 40 seconds behind the live broadcast.  
Menu Options  
Menu options allows you to set and/or change the various features  
and settings of the SR-H1000 Home Tuner. To enter the menu options,  
press and release the MENU button. The Menu Options  
screen will be displayed.  
Figure 1  
To navigate menu options press CHANNEL (ꢀꢁ) buttons to highlight  
a selection in the menu list, then press the ENTER button to select  
the highlighted menu option. To exit a menu, press the MENU button.  
42  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following selections (shown in bold text) are available from  
the Menu Options screen, and allow you to change the parameters  
for the items listed under the heading:  
SIRIUS ID  
Game Alert  
Settings  
Time Based Features  
Clock  
Alarm  
Jump Settings  
Program Alert  
Auto Shutdown  
Sleep Mode  
Display Options  
Memory Options  
Audio Level  
Confirmation Tone  
Parental Control  
OSD On/Off  
Signal Indicator  
Factory Default  
Each of these menu options are explained in the sections which  
follow. Note that if a selection is not made within 10 seconds,  
the receiver will exit the Menu Options screen and revert back  
to the Default display screen.  
SIRIUS ID  
This menu option displays your 12 digit SIRIUS ID (SID) number. The  
SID is unique to each Polk Audio Design’s SIRIUS Home Tuner, and  
is required to activate your service. It is recommended that you write  
this number in the space provided near the end of this user guide.  
No adjustments are allowed in this mode. To exit, press the ENTER  
button or press the Menu button.  
Figure 2  
MENU OPTIONS  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Game Alert  
Game Alert allows you to store your favorite sports teams in memory.  
The Polk Audio Design’s SIRIUS Home Tuner receiver will constantly  
scan the channels and will sound an alert when a sports team  
you stored in memory is playing a game, or when there is a score  
update for a team, depending upon which option you have chosen  
for the sports team.  
Sports teams which you have selected and are currently playing  
will be displayed in a category called My Game Zone.  
You may select one team from each sports league and the  
college category, however, more teams may be chosen by using  
the MEMORY (MEMO) function. Refer to the Memory (MEMO)  
and Song Seek (S-Seek) Functions section for more information  
to add additional teams.  
To Choose Teams To Add To Your Stored Game Alerts:  
1. Select Game Alert from the menu options.  
2. Select the sports league or college category  
of the team you wish to add.  
Figure 3  
44  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Select the league team name or college team name you wish to add.  
Figure 4  
Note that for college teams, you will receive an alert for all teams  
playing for that college. There are 30 college teams currently licensed  
for broadcast by SIRIUS.  
4. Select the type of alert you want for that team.  
Figure 5  
Initial Game Alert  
This option will sound an alert when the tuner is powered on  
and the sports team is playing, and when the sports team begins  
playing a game.  
All Score Updates  
This option does the same but in addition sounds an alert when  
the scores are updated for the sports team.  
To exit the Game Alert menu, press the MENU button.  
MENU OPTIONS  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings  
The Settings menu allows you access the Jump Settings, Display  
Options, Memory Options, Audio Level, Confirmation Tone, Parental  
Control, OSD on/off and add/skip menu options, which are described  
in the sections following.  
Jump Settings  
You can access the Jump Settings menu by pressing and holding the  
Jump button for two seconds or by pressing the MENU button to enter  
Menu Options, selecting Settings, and then selecting Jump Settings.  
There are two options available for jump button settings—  
Traffic and JumpSet. The currently selected option is indicated  
by the jump icon.  
Figure 6  
Setting the Jump Button to Traffic  
To Set the Jump Button to Jump to Traffic Reports:  
1. Select the Traffic menu option.  
2. Select the city for which you would like to hear traffic reports.  
(Use the MENU button to exit this menu without changing  
your current city selection, if desired).  
Figure 7  
46  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: If the channel list has not yet been downloaded from the SIRIUS  
data stream, an Updating City List notification screen will be displayed.  
Wait 10 minutes and then try selecting a city again.  
Setting The Jump Button To A Channel  
To Set The Jump Button To Any Channel Other Than A Traffic Channel:  
1. Select the JumpSet menu option. (Figure 6)  
2. Press the MENU button to exit the menu options and return to the  
Default display screen. The jump button can now be programmed  
by tuning to your desired channel and pressing and holding the  
Jump button for two seconds, as described in the Setting Channel  
Presets section.  
Display Options  
The brightness and contrast of the receiver’s display screen  
may be adjusted. To Adjust These Settings:  
1. Select the Display Options menu option.  
2. Select one of the following two options:  
Brightness—You can set the brightness for the LCD backlight  
and keypad. Use the CHANNEL (ꢀꢁ) buttons to adjust the  
brightness up or down. The bar graph at the bottom of the display  
screen will move to indicate the change.  
Contrast—This setting adjusts the relationship between the back  
ground and the text on the LCD display screen. Use the CHANNEL  
(ꢀꢁ) buttons to adjust the contrast up or down. The bar graph at  
the bottom of the display screen will move to indicate the change.  
Figure 8  
Press the ENTER button to select the setting.  
To exit Display Options, press the MENU button.  
MENU OPTIONS  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Confirm Tone  
The SR-H1000 Home Tuner can sound an audio tone alert when the  
tuner powers On and Off, as well as when an S-Seek Alert is activated.  
The default setting is On.  
To Change The Tone Options:  
1. Select the Confirm Tone menu option.  
2. Select On to enable the confirmation tone, or Off to disable the  
confirmation tone. To exit Confirm Tone, press the MENU button.  
Memory Options  
Memory Options provides for turning the memory search function  
(S-Seek) On or Off. In addition,all 30 presets can be cleared.  
To Change The Memory Options:  
1. Select the Memory Options menu option.  
2. Select one of the following menu options:  
Auto Memory Search—When this option is selected, you will be  
prompted to select On or Off to turn the S-Seek function on or off.  
Clear All Memory—Select this menu option to clear all presets.  
When selected, a Clear All Memory confirmation screen will be  
displayed. Select Yes to clear all S-Seek presets or No cancel.  
To exit, press the MENU button.  
Audio Level  
The audio output level of the Polk Audio Designs SIRIUS Home Tuner  
can be adjusted to fine tune the audio level for best performance.  
The audio level setting affects the analog line output.  
To Change The Audio Level:  
1. Select the Audio Level menu option.  
2. A horizontal bar graph is displayed with a—sign to the left and  
a + sign to the right. Press CHANNEL (ꢀꢁ) to adjust to the  
desired audio output level.  
3. To select the new setting and exit, press ENTER button.  
48  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 9  
Parental Control  
The SR-H1000 Home Tuner has the ability to lock a channel (or  
channels) you do not want others to access without your permission.  
Like the Skip channel feature, the locked channel will not appear when  
browsing channels with the CHANNEL buttons. In addition, when any-  
one tries to access the locked channel using the Direct Tuning function,  
an Enter Code screen will be displayed and the channel cannot be  
accessed until the correct code is entered.  
Locking Or Unlocking A Channel  
To Lock Or Unlock A Channel:  
1. Select the Lock Options menu option.  
2. Select the Lock/Unlock menu option. You will need to enter the  
lock code to proceed. Refer to the following section for information  
on how to set the lock code.  
Figure 10  
MENU OPTIONS  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Select the channel you wish to lock or unlock from the channel  
list. Pressing the ENTER button will either add the text Lock next  
to the channel name to indicate that the channel will be locked,  
or unlock a locked channel by removing the text Lock.  
Figure 11  
Changing The Lock/Unlock Code  
The first time the Lock/Unlock menu is accessed, you must enter the  
default lock code. The default lock code is 0000. This code can be kept  
or changed. To change the lock code:  
1. Select the Lock Options menu option.  
2. Select the Edit Code menu option.  
3. Enter the default lock code (0000) or the current lock code  
if you have changed it from the default code.  
4. The Enter Code prompt will be displayed. Enter your new four  
digit code using the 0–10 number buttons. You will then be  
prompted to enter the new code again to confirm.  
Figure 12  
5. When the new lock code is confirmed, the lock code is changed.  
Note: You can use this same method to edit the lock code again once it  
has been changed from the default code.  
50  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Time-Based Features  
The Time-Based Features menu allows you access the Clock, Alarm,  
Program Alert, Auto Shutdown, and Sleep Mode menu options, which  
are described in the sections following.  
Clock  
The Clock menu option allows you to setup the clock shown on the  
Default display screen, based on the format desired and the time zone  
in which you reside. The actual time is provided via the SIRIUS satellite  
signal, and will automatically update based on the received signal.  
When the Clock menu option is selected, the following menu options  
are displayed:  
Format—The clock format menu option allows for either 12-hour  
(default) or 24-hour display. Select the desired clock format.  
Time Zone—Since the clock adjusts the time automatically, it is  
important to specify your specific time zone. The following is a list  
of available time zones:  
(GMT-9:00) Alaska Time Zone  
(GMT-8:00) Pacific Time Zone  
(GMT-7:00) Mountain Time Zone  
(GMT-6:00) Central Time Zone  
(GMT-5:00) Eastern Time Zone  
(GMT-4:00) Atlantic Time Zone  
(GMT-3:30) Newfoundland Time Zone  
Select your particular time zone.  
Daylight Savings Time  
You can activate this function if your area observes Daylight  
Savings Time. Select DST Observed (default) or DST Not Observed.  
MENU OPTIONS  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alarm  
The Alarm menu option allows you to set the receiver to turn on at  
a specific time. The last selected channel prior to shutdown will be  
played when the receiver powers on.  
When the Alarm menu option is selected, the following menu options  
are displayed:  
Set Alarm—This menu option allows you to turn the alarm feature  
on or off. Select On to enable the alarm clock, or Off to disable the  
alarm clock feature.  
Alarm Time—This menu option allows you to set the alarm time.  
Use the CATEGORY buttons and the ENTER to select the time  
when you want the receiver to power on. (Default time is 12:00 PM).  
When the desired time is displayed, press the ENTER button.  
Program Alert  
The Program Alert menu option allows you to program the  
receiver to switch to a selected channel at a specific time.  
When this menu option is selected, the following menu  
options are displayed:  
Program Time/Day—This menu option allows you to choose  
the time and day for the program alert feature.  
If Time is selected, use the CATEGORY buttons and ENTER button  
to set the hours and minutes. AM or PM will change automatically  
when the AM or PM threshold has been exceeded. When the  
desired time is displayed, press the ENTER button.  
If Day is selected, the screen displays a default day of Monday,  
with choices of Monday through Sunday. Select the desired day.  
Channel—This menu option selects the channel to be played.  
Select the channel desired.  
Program Alert On/Off (Default is Off)—Select Program Alert On  
to enable the Program Alert feature or Program Alert Off to disable  
the Program Alert feature.  
52  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Shutdown  
The Auto Shutdown menu option allows you to program the tuner  
to automatically shut off after a one hour period without any user  
intervention. After 59 minutes of inactivity, a beep tone will sound  
and a Cancel Auto Shutdown display prompt appears on the screen  
to allow you to delay the automatic shutdown. When the Auto  
Shutdown menu option is selected, select Enable to activate the  
auto shutdown, or Disable to cancel an auto shutdown.  
When the Cancel Auto Shutdown screen is displayed after 59 seconds  
and the beep is heard, if you want to reset the auto shutdown feature  
press the ENTER button. The auto shutdown sequence will then  
reset to 1 hour.  
Sleep Mode  
The Sleep Mode menu option allows you to program the tuner  
to shutdown after a selected period of time. When the Sleep Mode  
menu option is selected, the following menu options are displayed:  
Off  
15 Minutes  
30 Minutes  
45 Minutes  
60 Minutes  
Select the desired sleep time, or select Off to cancel a previously  
selected sleep time.  
Signal Indicator  
When using the optional Home Docking Station or Boombox indoors,  
it is important to aim the antenna for maximum signal reception.  
The Signal Indicator display screen visually shows the strength  
of the signals being received.  
To View The SIRIUS Signal Strength:  
1. Select the Signal Strength menu option.  
2. Two 10 segment horizontal bar graphs will be displayed  
(SAT and TER) with a – sign to the left and a + sign to the right.  
MENU OPTIONS  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAT indicates satellite signal strength and TER indicates terrestrial  
signal strength, if available.  
3. Adjust the antenna for maximum signal strength as described  
in the appropriate accessory manual.  
To exit, press the ENTER button or press the MENU button.  
Figure 13  
Factory Default  
The Factory Default option will restore all original factory settings  
in your SR-H1000 Home Tuner. Note that factory default will not  
reset the lock code if you have changed it from the default lock code.  
To Perform A Factory Default Reset:  
1. Select the Factory Default menu option.  
2. Select Yes to restore all factory settings or select No  
to cancel and return to the Menu Options screen.  
Figure 14  
54  
SR°H1000 USERS GUIDE  
MENU OPTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If Yes is chosen, the receiver reverts to the original factory settings  
for the following parameters:  
All presets revert to empty  
Reset to Normal Tuning Mode  
Reset to default screen (with 2-line PDT display)  
Reset previous power state setting to: Off  
Game Alert: Clear all favorite teams  
Jump Settings: Clear jump setting  
Display Brightness: 80%  
Display Contrast: 50%  
Auto Memory Search: On  
Clear all S-Seek stored entries  
Audio Level: -3dB  
Confirmation Tone: On  
Clock Format: 12 Hour  
Clock Time Zone: Eastern Time Zone  
Clock Daylight Savings Time: Observed  
Alarm: Off  
Alarm Time: Cleared (12:00pm)  
Program Alert: Off  
Program Alert Time: Cleared (12:00pm)  
Program Alert Day: Cleared (Monday)  
Program Alert Channel: Cleared (184)  
Auto Shutdown: Disabled  
Sleep Mode: Off  
MENU OPTIONS  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptom  
Solution  
Receiver Does Not Power On Blown fuse, or the power  
cable is not properly connected.  
Check for a bad fuse and check  
power cable connection.  
Antenna Not Detected  
The satellite antenna is not  
connected to the receiver dock.  
Check the satellite antenna  
connection to the dock.  
Receiver Displays  
“Acquiring Signal”  
No satellite signal is being received.  
Check for obstacles over or around  
the satellite antenna.  
Audio Static Or Loss Of Clarity The audio cables are not  
connected. Check the audio  
cables at the receiver.  
Optional Accessories  
SC-H1  
SIRIUS Satellite Radio Connect Tuner  
56  
SR°H1000 USERS GUIDE  
TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Audio Output  
1V  
(Peak-to-Peak)  
<0.3%  
Total Harmonic Distortion  
(THD)  
Signal-To-Noise  
(S/N)  
Power  
Greater than 75dB  
AC120 ~ 60Hz,1.5A  
Requirements  
Operation Temperature  
0°C ~ 70°C  
(indoor home or office environment)  
Receiver Dimensions  
(With Feet)  
14.75" W x 2.75" H x 10.625" D  
(375mm W x 69.5mm H x 270mm D)  
Receiver Weight  
4 lbs.  
(1.814 kg)  
Package Weight  
5.5 lbs.  
(2.495 kg)  
Remote Control  
Dimensions  
1.75" W x 5.5" H x 1" D  
(45mm W x 140mm H x 23.22mm D)  
Remote Control Battery  
AAA  
(x2)  
SPECIFICATIONS  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty  
Limited One Year Consumer Warranty  
Directed Electronics (herein “DIRECTED”) promises to the original purchaser, to replace  
this product should it prove to be defective in workmanship or material under normal use,  
for a period of one-year from the date of purchase from the dealer as indicated by the date  
code marking of the product. During this one-year period, there will be no charge for this  
replacement PROVIDED the unit is returned to DIRECTED, shipping pre-paid. This warranty  
is non-transferable and does not apply to any unit that has been modified or used in a manner  
contrary to its intended purpose, and does not cover damage to the unit caused by installation  
or removal of the unit. This warranty is void if the product has been damaged by accident  
or unreasonable use, neglect, improper service or other causes not arising out of defects in  
materials or construction. ALL WARRANTIES, INCLUDING BUT NOT LIMITED TO EXPRESS  
WARRANTY, IMPLIED WARRANTY, WARRANTY OF MERCHANTABILITY, FITNESS FOR  
PARTICULAR PURPOSE, AND WARRANTY OF NONINFRINGEMENT OF INTELLECTUAL  
PROPERTY ARE EXPRESSLY EXCLUDED TO THE MAXIMUM EXTENT ALLOWED BY LAW,  
AND DIRECTED NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO ASSUME FOR  
IT ANY LIABILITY IN CONNECTION WITH THE SALE OF THE PRODUCT. DIRECTED HAS  
ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS OF THIRD PARTIES INCLUDING  
ITS AUTHORIZED DEALERS OR INSTALLERS. IN NO EVENT WILL DIRECTED BE LIABLE  
FOR ANY INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING LOSS  
OF PROFITS) AND IN NO EVENT, SHALL DIRECTED’S LIABILITY EXCEED THE PURCHASE  
PRICE PAID BY PURCHASER FOR THE PRODUCT. Some states do not allow the exclusion  
or limitation of incidental or consequential damages, so the above limitation or exclusion may  
not apply to you. Some states do not allow limitations on how long an implied warranty lasts,  
so the above limitation may not apply to you. Unit must be returned to DIRECTED, postage  
prepaid, with bill of sale or other dated proof of purchase bearing the following information:  
consumer’s name, telephone number, and address, authorized dealer’s name and address,  
and product description. Note: This warranty does not cover labor costs for the removal and  
reinstallation of the unit. IN ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST  
BE SHIPPED WITH PROOF OF PURCHASE FROM AN AUTHORIZED DIRECTED DEALER.  
BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT  
ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED  
IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA.  
58  
SR°H1000 USERS GUIDE  
WARRANTY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Records  
Serial Number (Located on the back of your SR-H1000):  
Model Number:  
Purchase Date:  
Staple Your Receipt Here:  
FOR YOUR RECORDS  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Polk Audio, Inc.  
Customer Service:  
1-800-377-7655  
Outside USA & Canada:  
410-358-3600  
SIRIUS Satellite Radio, Inc.  
1-888-539-7474  
Directed Electronics, Inc.  
1 Viper Way  
Vista, CA 92081  
© Copyright 2007.  
All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Camcorder IXE20 User Manual
Philips Stereo System MCM906 User Manual
Philips Telephone DECT 122 User Manual
Phoenix Gold Speaker AudioSource User Manual
Pinnacle Speakers Games WH6 120 6 User Manual
Planar Car Video System PL160M User Manual
Plantronics Telephone Winter 2006 User Manual
Polaroid DVD Player DVP 0600 User Manual
Powermate Portable Generator PC050562217 User Manual
ProForm Hot Tub PFSB73930 User Manual