Polaroid TV DVD Combo TDA 03211C User Manual
32” HD Widescreen LCD TV/DVD Combo  
TDA-03211C  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC  
Federal Communications  
Commission Statement  
This equipment has been tested and found to comply with the limits of a class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or more of the following  
measures:  
1. Reorient/Relocate the receiving antenna.  
2. Increase the separation between the equipment and receiver.  
3. Connect the equipment into an outlet on a circuit which is different from what the receiver is  
connected to.  
4. Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the manufacturer  
responsible for compliance could void the user authority to operate the  
equipment.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings and Precautions  
Warnings and Precautions  
To prevent any injuries, the following safety precautions should be observed in the installation, use,  
servicing and maintenance of this equipment.  
Before operating this equipment, please read this manual completely, and keep it nearby for future  
reference.  
This symbol is intended to alert the user to avoid the risk of electric shock.  
This equipment must not be disassembled by anyone except qualified service personnel.  
WARNING  
This symbol is intended to alert the user to the presence of important operating and  
maintenance instructions in the literature accompanying the appliance.  
CAUTION  
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.  
▪
▪
▪
▪
TO REDUCE THE RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE COVER (OR BACK).  
NO USER-SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
Use of controls, adjustments or performance of procedures other than those specified herein  
may result in hazardous radiation exposure.  
Important Safety Instructions  
This symbol indicates caution points.  
This symbol indicates actions that should not be done.  
This symbol indicates actions that must be performed.  
▪
▪
Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.  
The equipment may fall, causing serious injury to children or adults and serious damage to  
the equipment itself.  
Use only a cart or stand recommended by the manufacturer. This equipment and  
recommended cart or stand should be handled with care. Quick stops, excessive force, and  
uneven surfaces may cause the equipment and cart/stand to overturn.  
▪
Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is an  
important feature. Removing the grounding pin will increase the risk of damaging the  
equipment.  
▪
▪
▪
If you can not fit the plug into the electrical outlet, contact an electrician to install a grounding  
outlet.  
Always operate this equipment from the type of power source indicated on the rear of the  
serial/model plate.  
Never overload wall outlets and extensions.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings and Precautions  
▪
▪
Use and handle the power cord with care. Do not place any heavy objects on the AC  
power cord.  
Do not pull the AC power cord. Do not handle the AC power cord with a wet hand.  
▪
▪
Do not touch the power cord and antenna cable during lightning.  
Remove the plug from the wall outlet, if the equipment will not be used for a long period  
of time.  
▪
▪
Do not place, use or handle this equipment near water.  
Never expose the equipment to liquid, rain, or moisture.  
Seek for service if any of the above is spilled into the equipment.  
▪
▪
Do not expose the equipment to extreme temperature or to direct sunlight, as the  
equipment may heat up and suffer damage.  
Do not install the equipment near any heat sources such as radiators, heat registers,  
stoves, or any other apparatus that might produce heat.  
▪
▪
Do not attempt to service the equipment yourself.  
Opening and removing the covers may expose you to dangerous voltage or other  
hazards and may void your warranty. Refer service to qualified personnel.  
▪
▪
Do not place or drop any other objects on top.  
Do not insert anything into the ventilation holes of your equipment.  
Inserting any metal or flammable objects may result to fire or electric shock.  
▪
▪
Protect the power cord from being walked on or pinchrd particularly at plugs ,convenience  
receptacles, and the point where they exit from the apparatus.  
Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The  
equipment may fall, causing serious injury to children or adults and serious damage to  
the equipment itself.  
Always place the equipment on the floor or on a surface that is sturdy, level, stable and  
strong enough to support the weight of the equipment.  
▪
Do not block any ventilating openings. Leave an open space around the equipment.  
Never place the equipment :  
on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a  
bookcase, built-in cabinet, or any other similar places that may cause poor ventilation.  
▪
▪
Unplug this apparatus during lightning storms or when unused for long periods of time.  
Refer all servicing to qualified service personnel. Servicing is required when the  
apparatus has been damaged in any way, such as power-supply cord or plug is  
damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate normally, or has been dropped.  
▪
▪
Always remove the power cord from the outlet before cleaning the equipment.  
Never use liquid or aerosol cleaners on the equipment.  
Clean only with a soft dry cloth.  
▪
Only use attachments/accessories specified by the manufacturer.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings and Precautions  
Outdoor Antenna Safety Instructions  
If an outdoor antenna is connected, follow the precautions below:  
▪
▪
An outdoor antenna should not be located in any area where it could come in contact with  
overhead power lines, or any other electric light or power circuits.  
When installing an outdoor antenna system, extreme caution should be taken to prevent  
contact with power lines. Direct contact with power lines may be fatal and should be avoided  
at all costs.  
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the  
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for  
the grounding electrode.  
Antenna lead-in wire  
Ground clamps  
Antenna discharge unit  
(NEC section 810-20)  
Electric service  
equipment  
Grounding conductors  
(NEC section 810-20)  
Ground clamps  
Power service grounding  
(NEC Art250 part H)  
NEC : National Electrical code  
EXAMPLE OF OUTDOOR ANTENNA GROUNDING  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Federal Communications Commission Statement.......................... 1  
Warnings and Precautions  
Important Safety Instructions....................................................................................... 2  
Antenna Safety Instructions......................................................................................... 4  
Chapter 1 Introducing the LCD TV  
Key Features ............................................................................................................... 6  
Package Contents ....................................................................................................... 7  
Setting Your LCD TV.................................................................................................... 8  
Your LCD TV...............................................................................................................11  
Your Remote Control ................................................................................................. 14  
Chapter 2 Installing the LCD TV  
Connecting a TV Cable or an Antenna ...................................................................... 18  
Connecting a VCR..................................................................................................... 23  
Connecting a Video Camera or Game Console ........................................................ 24  
Connecting a DVD Player.......................................................................................... 26  
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 27  
Connecting an AV Equipment with HDMI Connector................................................. 28  
Connecting an AV Equipment with DVI Connector.................................................... 29  
Connecting a PC........................................................................................................ 30  
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ 31  
Chapter 3 USING THE FEATURES  
Using The Built-in DVD...............................................................................................................................32  
Using The USB Storage and SD Card Reader.............................................................................34  
Wide Screen Viewing...................................................................................................................................37  
Using the Program Guide..........................................................................................................................38  
Operating the Menu.....................................................................................................................................39  
Customizing the VIDEO Settings........................................................................................................... 41  
Customizing the AUDIO Settings........................................................................................................... 43  
Customizing the TV Settings.................................................................................................................... 45  
Customizing the SETUP Settings.........................................................................................................47  
Using the Program Block Settings........................................................................................................50  
Specifications ........................................................................................................ 55  
Programming your Remote Control......................................................... 56  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Chapter 1  
Introducing the LCD TV  
Key Features  
Various Audio/Video terminals for external equipment connection  
▪
▪
▪
▪
▪
▪
▪
▪
2 sets of composite A/V input terminals  
1 set of S-VIDEO terminals  
2 sets of component Video input terminals  
1 VGA/ Audio input terminals  
2 HDMI/Audio input terminals  
1 set of Audio(L/R) output terminals  
2 SPDIF output terminals (Optical x 1 /Coaxial x 1)  
1 Headphone terminal  
Built-In Slot-type DVD Player  
Supports DVD/SVCD/VCD/CD compatibility.  
▪
Built-in SD Card Reader  
Allows access to digital content stored on a SD card.  
▪
Built-In USB Connector  
The built-in TV tuner to receive HD ATSC  
▪
This function allows the reception of HD broadcasting without the addition of a set top  
box.  
High Definition Multimedia Interface (HDMI)  
▪
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that  
can carry up to 5 Gbps of combined video and audio in a single cable. This system  
eliminates the cost, complexity and confusion of multiple cables used to connect  
current A/V systems.  
HDTV Component Video Inputs  
▪
Offers the best video quality for DVD (1080i, 720p) and digital set-top-box (1080i,  
720p) connections.  
3D Digital Noise Reduction  
This function can digitally reduce image noise to provide better picture quality.  
▪
Film-Mode Detection (3:2 Reverse Pull Down)  
▪
This function can automatically detect content derived from film and adjust the  
interlacer’s frame matching to provide a more natural-looking, clearer image of the  
moving picture.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Package Contents  
Make sure all of the following contents are included.  
ꢀ
LCD TV  
ꢀ
Bottom Stand /  
Screw Driver and Screws (4)  
ꢀ
Component Cable  
ꢀ
Remote Control/  
AAA Batteries x 2  
ꢀ
VIDEO Cable  
SET UP  
CAB/  
TV  
DVD  
AUX  
SA  
T
SLEEP  
DVD MENU  
VOL  
CH  
PAGE  
MUTE  
GUIDE  
ASPECT  
LAST  
LIVE TV  
PIP  
MENU  
OK  
INFO  
1
CC  
EXIT  
DVR  
2
3
ABC  
DEF  
4
5
6
GHI  
JKL  
MNO  
7
8
9
PQRS  
TUV  
WXYZ  
INPUT  
.
0
ENTER  
ꢀ
Power Cord  
ꢀ
AUDIO Cable  
ꢀ
Warranty Card  
ꢀ
User’s Manual  
ꢀ
Quick Start Guide  
ꢀ
Stand Assembly Guide  
These items are all you need to set up and operate the LCD TV in its basic configuration.  
Make sure all of the above contents are included in the package. If you are missing  
any items, please contact the Polaroid customer service department.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Setting Up Your LCD TV  
How to install the TV Stand  
Read all instructions before continuing with the stand installation.  
Attach the Stand the TV with the bottom foam packaging material still  
attached.  
a. Lift foam packaging material from the top of the LCD out of the box.  
b. Lift LCD out of the box, with the bottom foam packaging material still attached, and place  
onto a stable surface.  
a
b
Protective bag  
Stand  
Shipping box  
Table  
c. Remove protective bag from LCD unit, but DO NOT remove the bottom foam packaging  
material from the TV.  
d. Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD  
with all six screws.  
Unit  
c
Table  
Stand  
Packaging material  
d
Unit  
Table  
Screws  
Stand  
Packaging material  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
How to remove the TV Stand  
If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please  
reference the instructions included in the wall mounting kit (sold separately).  
Verify your TV’s model and be sure to use the wall mounting kit specified  
for your TV model only. Contact your technician for assistance when  
installing the wall mounting kit.  
ꢃ
ꢁ
To prevent damaging the surface of the LCD TV, place the TV on a soft cloth.  
Soft cloth  
Remove the screws of the table stand and detach the table stand from the TV.  
Soft cloth  
Table stand  
ꢂ
Align the holes on the wall mounting hook units with the corresponding holes on the rear  
of the TV and fasten four screws.  
4 screws (supplied  
with the wall mount  
kit)  
Wall mounting hook  
unit (supplied with the  
wall mount kit)  
Soft cloth  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
How to setup the TV  
ꢃ
ꢁ
ꢂ
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal  
(refer to page18-22).  
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.  
Insert the 2 batteries supplied in remote control.  
Step1 Slide the back cover up to open the  
battery compartment of the remote  
control.  
Step2 Insert two AAA size batteries.  
Make sure to match the (+) and  
( - ) ends of the batteries with  
the (+) and ( - ) ends indicated  
in the battery compartment.  
Slide the cover back into place.  
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner  
etc.) on the remote, as it may suffer damage.  
ꢄ
Connect other an external AV device (refer to page23-31).  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Your LCD TV  
Front/Right Side View and Controls  
LED  
The LED light indicates when the LCD TV is  
activated.  
IR  
Infrared  
Receiver  
VOLUME+-  
Adjusts the volume up and down. Selects the main-  
menu item and change values for items when in the  
OSD mode.  
CHANNEL▲▼  
Scans up and down through channels. Selects sub-  
menu item when in the OSD mode.  
MENU  
Press once to display the OSD (on screen display),  
press again to turn the OSD off.  
INPUT  
Chooses from different input signal sources.  
Turns the LCD TV on and into standby mode.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Right Side View and Controls  
VIDEO1 IN  
Connects to the composite Video and  
Audio output jacks on external video  
equipment.  
VIDEO  
L
R
VIDEO1 IN  
HEADPHONE  
Connects to the external headphone  
for private listening.  
USB  
Allows access to digital content stored on  
a USB storage : MP4/JPEG  
BUILT-IN SD CARD READER  
Allows access to digital content stored on a  
SD card : JPEG/MPEG1/MPEG2/MPEG4  
/
PLAY/PAUSE  
/
STOP/EJECT  
SLOT-TYPE DVD PLAYER  
Any of the following disc types can  
be played on the DVD player: DVD/VCD/CD/CD-  
R/CD-RW/JPEG/KODAK PICTURE CD/WMA/  
DVD+R/RW/DVD-R/RW/MPEG-4  
.
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Rear View and Jacks  
VIDEO2 IN  
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.  
HDMI1 IN/HDMI2 IN  
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced,  
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for  
DVI connection.  
S-VIDEO IN  
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external  
video equipment.  
VGA IN  
Connects the PC, or other AV equipment with VGA and  
AUDIO(L/R) output jacks.  
VGA IN  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
YPbPr1 IN  
DIGITAL  
STEREO  
AUDIO  
AUDIO  
Y
Y
Pb  
Pb  
Pr  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
VIDEO  
AUDIO  
S-VIDEO  
AUDIO  
YPbPr2 IN  
AUDIO  
S-VIDEO IN  
VIDEO2 IN  
YPbPr1 IN/YPbPr2 IN  
Connects to the DVD player, Digital Set-Top-Box, or other AV  
equipment with component(YPbPr) video and audio output jacks.  
AUDIO OUT-STEREO  
Connects to the AUDIO(L/R) input jacks on AV equipment.  
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL  
Connects to the DIGITAL AUDIO jack on the digital/standard 5.1  
audio system.  
HDTV/TV AIR/CABLE  
Connects RF input from VHF/UHF antenna or cable  
to receive high/standard definition television.  
AC IN  
Connects to the AC power cord.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introducing the LCD TV  
Your Remote Control  
This package includes a Polaroid remote that enables control of up to four devices.  
To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR,  
or AUDIO.  
Turns the LCD TV on and off  
1
2
SET UP  
TV  
2
3
1
4
CAB/  
SAT  
SET UP  
Remote control universal code setup.  
For more information on setting up your  
remote control, please see the  
DVD  
AUX  
SLEEP  
DVD MENU  
“Programming Your Remote Control”  
section (refer to page 56)  
5
3
TV  
Controls the LCD TV/Built-in DVD/USB /  
SD card reader.  
6
VOL  
CH  
PAGE  
7
CAB/SAT  
Controls Cable Converter or Satellite  
Receiver  
8
9
10  
LAST  
MUTE  
GUIDE  
ASPECT  
DVD  
AUX  
Controls DVD player or Video player  
LIVE TV  
PIP  
MENU  
Controls Audio Amplifier  
11  
OK  
4
SLEEP  
Cycles through the LCD TV sleep time:  
OFF/10/20/30/40/50/60/90/120 mins  
5
ꢀꢁ ►ꢂ Other device function keys  
ꢃ ꢄ ꢅ ꢆ  
EXIT  
INFO  
1
CC  
DVR  
2
3
ABC  
DEF  
6
7
VOL+-  
Increases and decreases volume  
Change channel up and down  
5
6
4
JKL  
MNO  
GHI  
7
9
8
PQRS  
WXYZ  
TUV  
CH▲▼  
ASPECT  
INPUT  
.
0
ENTER  
8
9
Cycles through Wide mode settings:  
NORMAL/FULL/WIDE/ZOOM  
MUTE  
Pressing once mutes audio. Pressing  
again restores audio  
10  
11  
LAST  
Returns to previously selected channel  
GUIDE  
In TV mode, pressing GUIDE displays  
the Program Guide on the screen  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
12  
13  
14  
PIP  
Other device function key  
SET UP  
TV  
MENU  
Displays the OSD menu on the  
screen.  
CAB/  
SAT  
DVD  
AUX  
SLEEP  
DVD MENU  
◄ ►▲▼,OK Cycles through OSD options and selects  
individual menu items. OK confirms option  
settings  
OK  
In TV mode, pressing OK to display a  
channel list  
VOL  
CH  
PAGE  
INFO  
Displays information on the LCD TV  
screen such as input source, channel,  
program title.  
15  
LAST  
MUTE  
GUIDE  
ASPECT  
12  
13  
LIVE TV  
PIP  
16 CC  
Cycles through the Closed Caption:  
ꢅAnalog Closed Caption:OFF/CC1/  
CC2/CC3/CC4/Text1/Text2/Text3/  
Test4  
MENU  
ꢅDigital Closed Caption:  
Allow to set the digital closed caption  
OK  
14  
EXIT  
Exits the OSD menu  
17  
18  
15  
16  
17  
EXIT  
INFO  
1
CC  
DVR  
0-9/ENTER Pressing a number selects a channel.  
Following selection, pressing ENTER  
activates the channel, or channel  
2
3
ABC  
DEF  
5
6
4
JKL  
MNO  
activates automatically in 3 seconds  
GHI  
18  
19  
7
9
8
PQRS  
WXYZ  
TUV  
INPUT  
Pressing INPUT to display a source  
list, use ▲▼ to select the video  
equipment connected to the video  
inputs of your LCD TV:  
19  
INPUT  
.
0
ENTER  
Input Source  
TV(CABLE/AIR)  
VIDEO1 (SIDE)  
VIDEO2 (REAR)  
VIDEO3 (S-VIDEO)  
VIDEO4 (YPbPr1)  
VIDEO5 (YPbPr2)  
DVD  
USB  
CARD READER  
VIDEO6 (HDMI1)  
VIDEO7 (HDMI2)  
COMPUTER(VGA)  
▪
In TV mode, use with 0-9 and ENTER  
buttons to select a digital channels.  
Effective range:  
The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Controlling The Built-in DVD  
Press the TV button once to activate the built-in DVD control keys, the following functions are preset to  
operate the built-in DVD:  
DVD MENU  
Press to display the menu of a DVD  
disc.  
1
2
3
SET UP  
TV  
While playing, press to jump to the  
previous/next chapter or track.  
CAB/  
SAT  
DVD  
AUX  
1
4
SLEEP  
2
3
DVD MENU  
Pressing this button during playback  
advances/reviews playback; speed  
increases with each pressing:  
2x/4x/8x/16x/32x  
5
6
Normal playback.  
4
5
VOL  
CH  
PAGE  
7
While playing, press this button to stop  
playing.  
8
9
LAST  
MUTE  
GUIDE  
ASPECT  
While playing, press this button once to  
pause playing, press once again to  
resume playing.  
6
LIVE TV  
PIP  
MENU  
10  
11  
7
8
VOL+-  
Increases and decreases volume.  
ASPECT  
Cycles through Wide mode settings:  
NORMAL/FULL/WIDE/ZOOM  
OK  
MUTE  
Pressing once mutes audio. Pressing  
again restores audio.  
9
12  
EXIT  
INFO  
1
CC  
13  
DVR  
GUIDE  
Displays the Built-in DVD Setup Menu  
on the screen.  
10  
11  
2
3
ABC  
DEF  
5
6
4
JKL  
MNO  
GHI  
◄ ►▲▼,OK Cycles through Built-in DVD OSD  
options and selects individual menu  
items. OK confirms option settings  
7
9
8
PQRS  
WXYZ  
TUV  
INPUT  
.
0
ENTER  
12 INFO  
Displays current information on screen  
during playback.  
13 EXIT  
Press this button to eject the disc.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Controlling The USB Storage and SD Card Reader  
Press the TV button once to activate the built-in USB and SD Card Reader control keys, the following  
functions are preset to operate the USB Storage and SD Card: For more information on setting up your  
USB storagnd adn card reader, please see the “Using the USB Storage and SD Card Reader” section.  
DVD MENU  
Press to display FILE MENU.  
1
2
SET UP  
TV  
Press to go to the next or previous  
image.  
CAB/  
SAT  
DVD  
AUX  
1
3
SLEEP  
3
4
5
Normal playback.  
2
DVD MENU  
Press to display the thumbnail album.  
4
5
While Slide show, press this button  
once to pause playing, press once  
again to resume playing.  
VOL  
CH  
PAGE  
6
6
7
VOL+-  
Increases and decreases volume.  
7
8
ASPECT  
Cycles through Wide mode settings:  
NORMAL/FULL/WIDE/ZOOM  
LAST  
MUTE  
GUIDE  
ASPECT  
LIVE TV  
PIP  
MENU  
8
9
MUTE  
Pressing once mutes audio. Pressing  
again restores audio.  
◄ ►▲▼,OK In FILE MENU and thumbnail album,  
Press to move the highlight bar to a file,  
then press OK to confirm the selected  
file.  
9
OK  
EXIT  
INFO  
1
CC  
►▼  
While image displaying, press to rotate  
an image 90 degrees in a clockwise or  
counterclockwise.  
DVR  
2
3
ABC  
DEF  
5
6
4
JKL  
MNO  
GHI  
7
9
8
PQRS  
WXYZ  
TUV  
INPUT  
.
0
ENTER  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Chapter 2  
Installing the LCD TV  
Refer to the owner’s manual of any external equipment to be connected.  
When connecting any external equipment, do not connect any AC power cords to wall outlets  
until all other connections are completed.  
Connecting a TV Cable or an Antenna  
Antenna Connection  
The antenna requirements for good color TV reception are more important than those for a black &  
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.  
The following is a brief explanation of the type of connection that is provided with the various antenna  
systems.  
■
A 75-ohm system is generally a round cable (not included) with F-  
type connector that can easily be attached to a terminal without  
tools.  
F-type connector  
75-ohm coaxial cable (round)  
■
A 300-ohm system is a flat twin-lead cable (not included) that can  
be attached to a 75-ohm terminal through a 300-75-ohm adapter  
(not included).  
300-ohm twin-lead cable (flat)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Use one of the following two diagrams when connecting an outdoor antenna.  
A: Shows how to use a VHF/UHF combination outdoor antenna.  
B: Shows how to use a separate VHF and/or UHF outdoor antenna.  
A. Combination VHF/UHF antenna  
VHF/UHF  
Antenna  
300/75-ohm adapter  
(not included)  
VHF/UHF  
Antenna  
300-ohm twin-  
lead cable  
75-ohm  
coaxial cable  
B. Separate VHF and/or UHF antennas  
UHF  
Antenna  
Combiner  
(not included)  
300-ohm twin-  
lead cable  
IN  
OUT  
75-ohm  
coaxial cable  
VHF  
Antenna  
300-ohm twin-  
lead cable  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Cable TV (CATV) Connection  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the  
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular,  
specifies that the cable ground shall be connected to the grounding system of the building  
accurately, or as close to the point of cable entry as possible. Use of this TV for other than  
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for  
the use of the general public may require authorization from the broadcast/cable company, and/  
or program owner.  
■
■
A 75-ohm coaxial cable connector is built into the set for easy hookup.  
When connecting the 75-ohm coaxial cable to the set, connect the 75-  
ohm cable into the ANT. terminal.  
Some cable TV companies offer premium pay channels. Since the  
signals of these premium pay channels are scrambled, a cable TV  
converter/descrambler is generally provided to the subscriber by the  
cable TV company.  
This converter/descrambler is necessary for normal viewing of scrambled channels.  
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,  
consult your cable TV company.)  
For more specific instructions on installing cable TV, consult your cable TV company.  
One possible method of connecting the converter/descrambler provided by your cable TV  
company is shown in the diagram below.  
RF switch  
(not included)  
2 set signal  
splitter  
A
IN  
Cable TV Line  
OUT  
(not included)  
B
Cable TV converter/  
descrambler  
VHF/UHF IN  
(not included)  
■ The RF switch (not included) is required to provide two inputs (A and B). Setting  
the RF switch to position A allows viewing of all unscrambled channels by using  
the TV channel keys.  
■
Setting the RF switch to position B allows viewing of all scrambled channels via  
the converter/descrambler by using the converter channel keys.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
ꢃ
ꢁ
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.  
HDTV/TV  
AIR/CABLE  
VHF/UHF IN  
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.  
HDTV/TV  
AIR/CABLE  
VHF/UHF IN  
This TV is equipped with a safety fuse. In the event of an electrical storm or power outage  
the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by  
prying the cover off, following the illustration below.  
If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time  
Lag Fuse (Slow Blow) to replace the fuse.  
Firm Plastic Prying Tool  
(Using a metal tool may cause shock)  
4A 250V  
5x20mm  
Back of TV  
Fuse  
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.  
ꢂ
Press the button on the remote to turn on the LCD TV.  
Always disconnect the LCD TV from the main voltage when the LCD TV will not  
be used for a long period of time. The POWER button on the front panel is only  
used for switching the LCD TV into standby, it does not disconnect the device  
from the main voltage. To completely disconnect the main voltage, please  
remove the power plug from the socket.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
ꢄ
Press the INPUT button on the remote to display the Input List. Use the ▲▼ buttons to  
select TV and press the OK button.  
Main  
ꢇ
TV(CABLE/AIR)  
VIDEO1 (SIDE)  
VIDEO2 (REAR)  
VIDEO3 (S-VIDEO)  
VIDEO4 (YPbPr1)  
VIDEO5 (YPbPr2)  
DVD  
USB  
CARD READER  
VIDEO6 (HDMI1)  
VIDEO7 (HDMI2)  
COMPUTER(VGA)  
ꢇ
Press the MENU button on the remote control to display the Main menu, and use the ◄►  
buttons to select the TV.  
Channel Scan  
Tuner Mode  
Channel Skip  
Time Zone  
Cable  
Eastern Time  
TV  
Select  
Exit  
ꢈ
ꢆ
Press the ▼ button to select Channel Scan, and press the OK button.  
The Channel Scan automatically creates a list of receivable channels. Press the MENU  
button at any time to interrupt the memorization process.(the list cannot be created if  
interrupted)  
The Channel Scanning will create a list of receivable channels for the current  
input (antenna or cable). You will be required to run Channel Scanning for each  
RF input to create a list of available channels from both inputs.  
Press the OK button to display the received channel list, then press ▲▼ to select a  
channel. Or, use the ▪ (INPUT button) with 0-9 buttons to select digital channel( for  
example 9.1)  
Channel List  
5-2 RF5-2  
9-1 KQED-HD  
9-2 KOED-SD  
8
CCT  
12  
13  
15  
The digital main channel might include many subchannels (for example 9-1, 9-  
2..) that are showing program at the same time.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting a VCR  
Rear of TV  
VGA IN  
AUDIO  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
STEREO  
AUDIO  
Y
Y
Pb  
Pb  
Pr  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
VIDEO  
AUDIO  
S-VIDEO  
AUDIO  
YPbPr2 IN  
AUDIO  
AUDIO Cable  
S-VIDEO Cable  
AV Cable  
A
B
ꢃ
ꢁ
METHOD A:  
Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s  
VIDEO2 IN jacks.  
METHOD B:  
Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio  
inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s  
S-VIDEO IN input jack.  
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the  
button on the remote to turn on the LCD TV.  
To watch a videotape, press the INPUT button on the remote to select  
VIDEO2( METHOD A), or VIDEO3 (METHOD B).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting a Video Camera or Game console  
Rear of TV  
Right Side  
VGA IN  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
VIDEO  
YPbPr1 IN  
Pr  
STEREO  
AUDIO  
AUDIO  
Y
Y
Pb  
Pb  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL  
Pr  
R
VHF/UHF IN  
VIDEO1 IN  
R
R
VIDEO  
AUDIO  
VIDEO2 IN  
S-VIDEO  
AUDIO  
S-VIDEO IN  
YPbPr2 IN  
AUDIO  
AUDIO Cable  
or  
S-VIDEO Cable  
GAME CONSOLE  
B
AV Cable  
A
ꢃ
METHOD A:  
Use a composite cable to connect the video camera’s or game console’s composite  
video/audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks.  
METHOD B:  
Use an audio cable to connect the video camera’s or game console’s audio output  
jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the video  
camera’s or game console’s s-video output jack to the LCD TV’s S-VIDEO IN input  
jack.  
ꢁ
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.  
To watch a video vis camera or game console, press the INPUT button on the remote  
to select VIDEO2/VIDEO1( METHOD A), or VIDEO3 (METHOD B).  
Not all cameras have the ability to connect to a TV. Please check your video camera  
user guide for compatibility.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting a DVD Player  
Rear of TV  
VGA IN  
AUDIO  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
STEREO  
AUDIO  
Y
Y
Pb  
Pb  
Pr  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
R
L
L
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
VDO  
AI
-VIO  
AI
or  
Pb Pr  
COMPONENT/AUDIO Cable  
AUDIO Cable  
S-VIDEO Cable  
AV Cable  
Pb Pr  
A
B
C
DVD PLAYER  
ꢃ
METHOD A:  
Use a composite cable to connect the DVD player’s composite video/audio jacks to the  
LCD TV’s VIDEO2 IN jacks.  
METHOD B:  
Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s  
audio inputs. Use an S-Video cable to connect the DVD player’s s-video output jack  
to the LCD TV’s S-VIDEO IN input jack.  
METHOD C:  
Use a component cable to connect the DVD player’s component output jacks to the LCD  
TV’s YPbPr1 IN or YPbPr2 IN input jacks.  
Use an audio cable to connect the DVD player’s component audio jacks to the LCD TV’s  
audio input jacks.  
The component video jacks on your DVD player are sometimes labeled  
YPbPr, or YCbCr. For an explanation of component video, see your DVD  
player’s user guide.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
ꢁ
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.  
To watch a DVD, press the INPUT button on the remote to select  
VIDEO2( METHOD A), or VIDEO3 ( METHOD B), or VIDEO4/VIDEO5 (METHOD C).  
For best picture quality, if your equipment has component video output, use  
a component cable instead of a composite video or S-video cable.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting a Digital TV Cable Box or Digital Satellite Receiver  
Rear of TV  
VGA IN  
AUDIO  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
STEREO  
AUDIO  
Y
Y
Pb  
Pb  
Pr  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
R
L
L
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
VIDEO  
AUDIO  
S-VIDEO  
AUDIO  
S-VIDEO IN  
VIDEO2 IN  
Pb Pr  
COMPONENT/AUDIO Cable  
Pb Pr  
ꢃ
Use a component cable to connect the satellite receiver’s/TV Cable Box’s component  
(YPbPr1) output jacks to the LCD TV’s component input jacks.  
Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio  
jacks to the LCD TV’s audio input jacks.  
ꢁ
ꢂ
ꢄ
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
Press the button on the remote to turn on the LCD TV.  
To watch programs via satellite receiver or TV Cable Box, press the INPUT button on  
the remote to select VIDEO4/VIDEO5.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting an AV Equipment with HDMI Connector  
Rear of TV  
VGA IN  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
Pr  
STEREO  
AUDIO  
Y
Y
Pb  
Pb  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
L
R
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
VIDEO2
S-VIDEO  
AUDIO  
S-VIDEO IN  
YPbPr2 IN  
AUDIO  
HDMI Cable  
AV EQUIPMENT  
ꢃ
ꢁ
Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN  
jacks.  
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.  
Press the INPUT button on the remote to select VIDEO6 or VIDEO7.  
The HDMI connector provides both video and audio signals, it’s not  
necessary to connect the audio cable.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 Installing the LCD TV  
Connecting an AV Equipment with DVI Connector  
Rear of TV  
VGA IN  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
Pr  
STEREO  
UDIO  
AUDIO  
Y
Y
Pb  
Pb  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
L
L
R
R
L
L
R
R
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
UDIO  
IN  
S-VIDEO  
AUDIO  
S-VIDEO IN  
YPbPr2 IN  
AUDIO  
AUDIO Cable  
AUD IO  
L
R
DVI IN  
HDMI-to-DVI Cable  
AV EQUIPMENT  
ꢃ
ꢁ
Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s  
HDMI IN jacks.  
Use an audio cable to connect the AV equipment’s audio output jacks to LCD TV’s HDMI  
AUDIO jacks.  
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.  
Press the INPUT button on the remote to select VIDEO6 or VIDEO7.  
If the LCD TV is connected to AV equipment’s DVI connector, you will need  
an HDMI-to-DVI cable or an HDMI adapter(not suplied) and an audio cable.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Connecting a PC  
Rear of TV  
VGA IN  
DIO  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
STEREO  
AUDIO  
Y
Y
Pb  
Pb  
Pr  
AUDIO  
OPTICAL  
HDTV/TV  
AIR/CABLE  
R
R
L
L
R
R
L
L
R
L
COAXIAL  
Pr  
VHF/UHF IN  
R
R
VIDEO  
AUDIO  
E
YPbPr2 IN  
AUDIO  
VIDEO2 IN  
AUDIO Cable  
VGA Cable  
PC  
ꢃ
ꢁ
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input  
jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.  
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
ꢂ
ꢄ
Press the button on the remote to turn on the LCD TV.  
Press the Input button on the remote to select COMPUTER.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System  
For better sound quality, you may want to use a Home Theater/Stereo System.  
NOTE: If you have a Home Theater/Stereo System that you would like to use with your new TV, we  
recommend that you do NOT use your TV’s audio output for this connection. For the best sound  
quality, our product testing has shown that you should connect your Home Theater/Stereo System  
directly to your A/V device. I.E. You should connect your Home Theater/Stereo System to your DVD  
player, Cable/Satellite box or other AV equipment. Although not recommended, if you prefer to use  
the TV audio output to make this connection to your Home Stereo System, please follow the  
instructions below.  
VGA IN  
HDMI1 IN  
HDMI2 IN  
AUDIO OUT  
DIGITAL  
YPbPr1 IN  
Pr  
STEREO  
AUDIO  
AUDIO  
Y
Y
Pb  
Pb  
AUDIO  
OPTICAL  
HDTV/TV  
/CABLE  
L
L
R
R
L
L
R
R
L
L
R
L
COAX
Pr  
/UHF IN  
R
VIDEO  
AUDIO  
VIDEO2 IN  
S-VIDEO  
AUDIO  
S-VIDEO IN  
YPbPr2 IN  
AUDIO  
AUDIO Cable  
A
B
Audio Receievr  
Audio Amplifier  
ꢃ
ꢁ
Connecting to Audio Receiver:  
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s  
AUDIO OUT jacks.  
Connecting to Digital 5.1 Sound System:  
METHOD A:  
Use a optical cable to connect the audio amplifier’s OPTICAL IN jacks to LCD TV’s  
OPTICAL OUT jacks.  
METHOD B:  
Use a coaxial cable to connect the audio amplifier’s COAXIAL IN jacks to LCD TV’s  
COAXIAL OUT jacks.  
ꢂ
ꢄ
Connect all AC power sources, before turning on the power switch of the LCD TV or  
other connected equipment.  
Press the button on the remote to turn on the LCD TV.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Chapter 3  
USING THE FEATURES  
Using The Built-in DVD  
ꢃ
ꢁ
Turn your LCD TV on.  
Insert a disc (DVD, VCD, SVCD, or audio CD).  
NOTE: The printed side of the disk should face the front of the TV.  
ꢅ
TO INSERT A DISC  
ꢅ
TO REMOVE A DISC  
Any of the following disc types can be  
played on the DVD player: DVD-Video/DVD  
R/RW/SVCD/VCD/CD/CD-R/CD-RW.  
When removing the disc, do not  
attempt to pull it from its slot. Please  
push the EJECT button as  
illustrated below.  
Push  
Insert  
ꢂ
Press the Input button on the remote, use ▲▼ to select DVD and press  
the OK button.  
Input Source  
TV(CABLE/AIR)  
VIDEO1 (SIDE)  
VIDEO2 (REAR)  
VIDEO3 (S-VIDEO)  
VIDEO4 (YPbPr1)  
VIDEO5 (YPbPr2)  
ꢇ
DVD  
USB  
CARD READER  
VIDEO6 (HDMI1)  
VIDEO7 (HDMI2)  
COMPUTER(VGA)  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
ꢄ
Press GUIDE button on the remote control to display the Built-in DVD Setup Menu:  
ꢅ
USING THE BUILT-IN DVD SETUP MENU  
1. Use the ▲▼◄► on the remote control to to move the light bar to the option you want,  
press the OK button.  
2. During playback, the following operations are available:  
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
ꢅ
EJECT  
PLAY  
Stops playback.  
Starts playback.  
Get slow motion effect during playback  
Jumps to the previous/next chapter or track.  
Gets different playback forward/backward speeds.  
While playing, pause playback temporarily  
Press to select the Audio effect and Language.  
Changes DVD subtitle language. When this icon is  
highlighted you must press the OK button to change the  
language selections.  
F.FWD/NEXT  
REW./PREV.  
PAUSE  
AUDIO  
SUBTITLE  
ꢅ
CAMERA ANGLE  
Press to select the desired camera angle disc.  
ꢇ
The Built-in DVD player can playback JPEG format pictures and audio files on a  
personally recorded CD-R/RW disc. After loading all files, theFile Menu will show the  
contents of the disc:  
001/015  
01 P107001  
02 P107002  
03 P107003  
04 P107004  
05 WOFSON  
06 HDCP  
07 EDIT  
00:00  
00:00  
ꢅ Press ▲▼ to select an image and press the  
button to play the file.  
ꢅ Press ▲▼ to select the folder and then press ► to enter the folder. Press the ENTER  
button to active and press ▲▼ to select a file. Press ◄ to back the File Menu.  
ꢅ While an image is displayed, press the DVD MENU button to display the File Menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Using The USB Storage and SD Card Reader  
ꢃ
ꢁ
Turn your LCD TV on.  
Insert a USB device/SD card that contains JPG/JPEG/MPG/WMA/DAT files.  
ꢅ
TO INSERT A USB STORAGE  
ꢅ
TO INSERT A SD CARD Reader  
Allows the insertion of a USB storage.  
You can view digital images or music in  
a USB storage on your TV.  
Allows the insertion of a SD card. You  
can view digital images or music.  
Insert  
Insert  
Be sure to insert the USB storage or SD card in the correct direction. If the USB storage or  
SD card is forced in the wrong way, it may cause damage.  
ꢂ
Press the Input button on the remote, use ▲▼ to select a input source and  
press the OK button.  
ꢅ
TO INSERT A USB STORAGE  
ꢅ
TO INSERT A SD CARD Reader  
Input Source  
TV(CABLE/AIR)  
VIDEO1 (SIDE)  
VIDEO2 (REAR)  
VIDEO3 (S-VIDEO)  
VIDEO4 (YPbPr1)  
VIDEO5 (YPbPr2)  
DVD  
USB  
CARD READER  
VIDEO6 (HDMI1)  
VIDEO7 (HDMI2)  
COMPUTER(VGA)  
Input Source  
TV(CABLE/AIR)  
VIDEO1 (SIDE)  
VIDEO2 (REAR)  
VIDEO3 (S-VIDEO)  
VIDEO4 (YPbPr1)  
VIDEO5 (YPbPr2)  
DVD  
ꢇ
USB  
ꢇ
CARD READER  
VIDEO6 (HDMI1)  
VIDEO7 (HDMI2)  
COMPUTER(VGA)  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
ꢄ
After loading all files, theFile Menu will show the contents of the USB device:  
001/015  
01 P107001  
02 P107002  
03 P107003  
04 P107004  
05 WOFSON  
06 HDCP  
07 EDIT  
00:00  
00:00  
Do not switch the Input Source between USB and CARD READER while the data is being  
read. It may cause data loading failure.  
ꢅ Press ▲▼ to select an image and press the  
button to play the file.  
ꢅ Press ▲▼ to select the folder and then press ► to enter the folder. Press the ENTER  
button to active and press ▲▼ to select a file. Press ◄ to back the File Menu.  
ꢅ While an image is displayed, press the DVD MENU button to display the File Menu.  
ꢇ
ꢅ
RUNNGING A SLIDE SHOW  
1. Press ▲▼ on the remote control to move the light bar to the file you want to play,  
and press the OK button to play the file.  
2. While an image is displayed full size, you can pause the slide show by pressing  
.
3. Press  
on the remote control to go to the next or previous image.  
ꢅ
USING THE THUMBNAIL ALBUM  
1. Press button on the remote control to display the thumbnail album.  
Slide Show ◄Prev Next►  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
2. Press ▲▼◄ on the remote control to move the light bar to the image you  
want to play, and press the OK button to play the file.  
Slide Show ◄Prev Next►  
3. ꢅSlide Show: Press ▲▼◄ to highlisht Slide Show and press the OK  
button, to display all the images recorded on the SD card/USB storage.  
ꢅPrev/Next: Press ▲▼◄ to highlisht Prev/Next and press the OK button,  
to go to the previous or next page of the thumbnail album.  
ꢅ
ROTATING PICTURES  
1. Press ◄► on the remote control to to rotate the picture clockwise or  
counterclockwise in 90-degree increments.  
2. Press  
.
on the remote control to go to the next or previous image.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Wide Screen Viewing  
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through  
the following wide screen settings. Press the ASPECT button repeatedly to select the screen  
format you want.  
ꢃ
NORMAL  
Displays at 4:3 aspect ratio  
NORMAL is not available when you are watching 720p or 1080i source.  
ꢁ
FULL  
Stretches the image vertically and  
horizontally to keeps the image size  
consistent in the center of the screen and  
stretches the sides  
ꢂ
ꢄ
WIDE  
Stretches the image vertically and  
horizontally to fill the screen at 1:1.85  
aspect ratio  
ZOOM  
Stretches the image vertically and  
horizontally to fill the screen at 1:2.35  
aspect ratio  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Using the Program Guide  
The Program Guide feature brings all sorts of information to your screen, such as program title,  
program duration, time remaining, rating information, closed caption, availability, etc.  
ꢃ
ꢁ
With the LCD TV connected to a television programming source, press the INPUT button  
on the remote control and use the ▲▼ buttons to select TV and press the OK button.  
Press the GUIDE button on the remote control, the Program Guide will appear on the  
screen:  
Monday 15 January 2007 2:36:26 PM  
3-1  
7-2 KQED-SD  
7-2  
Today  
7:00 PM  
7:30 PM  
9:30 PM  
12:30 AM  
EYEWITHNESS NEWS 4PM  
ABC WORLD NEWS  
cc  
cc  
cc  
cc  
Today  
Today  
ABC’S MONDAY NIGHT FOOTBALL  
SPORTSZONE  
Tomorrow  
ꢂ
ꢄ
Press the ◄► button to select the channel.  
Press the ▲▼ button to select the program from a list, the Program Guide provides  
introduction about the current program being shown on each channel.  
The Program information in the guide is provided by the broadcasters. It may sometimes  
include only the channel number, without a program title or description.  
Monday 15 January 2007 2:36:26 PM  
3-1  
7-2 KQED-SD  
7-2  
Today  
7:00 PM  
7:30 PM  
9:30 PM  
12:30 AM  
EYEWITHNESS NEWS 4PM  
ABC WORLD NEWS  
cc  
cc  
cc  
cc  
Today  
Today  
ABC’S MONDAY NIGHT FOOTBALL  
SPORTSZONE  
Tomorrow  
5:00 PM - 5:30 PM Mon, 20 Jan.  
EYEWITHNESS NEWS  
TV-PG  
ꢇ
Press the GUIDE button again on the remote control to exit the Program Guide  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Operating the Menu  
ꢃ
ꢁ
Press the button to turn the LCD TV on.  
Press the MENU button on the remote control, the on-screen menu will appear on the  
screen. Use the ◄► buttons to select your main menu option.  
VIDEO MENU:  
Allows you to make adjustments to your picture settings.  
▪
If the signal source is TV, the VIDEO MENU  
appears as:  
▪
If the signal source is Video/S-Video/YPbPr/VGA/  
HDMI, the VIDEO MENU appears as:  
Picture Mode  
Contrast  
User  
Picture Mode  
Contrast  
User  
50  
54  
54  
0
50  
54  
Brightness  
Saturation  
Brightness  
Color Temperature  
Noise Reduction  
VGA  
Hue  
Medium  
Sharpness  
5
Color Temperature  
Noise Reduction  
Medium  
Select  
Video  
Exit  
Video  
Select  
Exit  
AUDIO MENU:  
Allows you to customize the audio options and effects.  
▪
If the signal source is VIDEO/S-VIDEO/YPbPr/  
HDMI/VGA, the AUDIO MENU appears as:  
▪
If the signal source is TV, the AUDIO MENU  
appears as:  
Bass  
50  
50  
0
Bass  
50  
50  
0
Treble  
Treble  
Balance  
Balance  
Sound Effect  
Speaker  
Surround  
On  
Sound Effect  
MTS  
Surround  
Stereo  
SPDIF Type  
Audio Language  
Speaker  
Dolby Digital  
English  
On  
Audio  
Select  
Exit  
Audio  
Select  
Exit  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
TV MENU:  
Allows you to edit and label channels.  
Channel Scan  
Tuner Mode  
Channel Skip  
Time Zone  
Cable  
Eastern Time  
TV  
Select  
Exit  
SETUP MENU:  
Allows you to set up a variety of features: Language, Closed Caption, factory reset, Parental Control, sleep  
timer.  
▪
If the signal source is TV, the SETUP MENU  
appears as:  
▪
If the signal source is HDMI/VGA/Video/S-Video/  
YPbPr, the SETUP MENU appears as:  
OSD Language  
Time Setup  
Closed Caption  
Parental  
English  
Middle  
OSD Language  
Time Setup  
Parental  
English  
Middle  
Gamma  
Gamma  
Reset Default  
Reset Default  
Setup  
Select  
Exit  
Setup  
Select  
Exit  
ꢂ
ꢄ
Use the ▲▼ buttons to highlight the option of the sub-menu, and press the OK  
button. While in adjustment mode, and use the ◄► buttons to change the value of  
the item.  
Press the EXIT button to exit the menu.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Customizing the VIDEO Settings  
ꢃ
ꢁ
Press the button to turn the LCD TV on.  
Press the MENU button on the remote control to display the Main menu, and use the ◄►  
buttons to select the VIDEO.  
ꢂ
Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to  
change the setting, and press the MENU to exit the menu  
▪
If the signal source is TV, the VIDEO MENU  
appears as:  
▪
If the signal source is VGA/Video/S-Video/YPbPr/  
HDMI, the VIDEO MENU appears as:  
Picture Mode  
Contrast  
User  
Picture Mode  
User  
50  
54  
54  
0
Contrast  
50  
54  
Brightness  
Saturation  
Brightness  
Color Temperature  
Noise Reduction  
VGA  
Hue  
Medium  
Sharpness  
5
Color Temperature  
Noise Reduction  
Medium  
Select  
Video  
Exit  
Video  
Select  
Exit  
ꢄ
The VIDEO menu includes the following options:  
Picture Mode  
Contrast  
Cycles among display types: Vivid/Hi-Bright/Cinema/Sport/User  
Controls the difference between the brightest and darkest regions of  
the picture  
Brightness  
Saturation  
Hue  
Controls the overall brightness of the picture  
Controls the color intensity  
Controls the difference between the green and red regions of the  
picture  
Sharpness  
Increase this setting to see crisp edges in the picture; decrease it for  
soft edges  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Color temperature  
Adjusts color components independently to achieve a warm or cool  
effect: Cool/Middle/Warm/User  
▪
▪
▪
▪
Warm:  
Increases red tint  
Nature : Increases natural tint  
Cool :  
User :  
Increases blue tint  
Allows the user to adjust red, green and blue color  
component levels independently.  
Color Temperature  
R Gain  
User  
120  
120  
120  
G Gain  
B Gain  
Color Temperature  
Select  
Exit  
Noise Reduction  
VGA  
Select to reduce the noise level of connected equipment: Off/Low/  
Medium/Strong.  
Press the OK button to enter the VGA Setting:  
Auto Adjust  
H.Position  
V. Position  
Clock  
72  
31  
127  
31  
Phase  
VGA  
Select  
Exit  
▪
Auto Adjust  
Press the OK button to automatically adjust  
the display settings to optimize performance  
based on the VGA mode  
▪
▪
▪
▪
H. Position  
V. Position  
Clock  
Adjusts the position of the picture left and right  
in the window  
Adjusts the position of the picture up and down  
in the window  
Controls the width of the picture based on the  
VGA mode  
Phase  
Controls the signal phase, which can improve  
focus clarity and image stability based on the  
VGA mode  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Customizing the AUDIO Settings  
ꢃ
ꢁ
Press the button to turn the LCD TV on.  
Press the MENU button on the remote control to display the Main menu, and use the  
◄► buttons to select the AUDIO.  
ꢂ
Use the ▲▼buttons to highlight an individual AUDIO option, use the ◄► buttons to  
change the setting, and press the MENU to exit the menu  
▪
If the signal source is VIDEO/S-VIDEO/YPbPr/  
HDMI/VGA, the AUDIO MENU appears as:  
▪
If the signal source is TV, the AUDIO MENU  
appears as:  
Bass  
50  
50  
0
Bass  
50  
50  
Treble  
Treble  
Balance  
Balance  
0
Sound Effect  
Speaker  
Surround  
On  
Sound Effect  
MTS  
Surround  
Stereo  
SPDIF Type  
Audio Language  
Speaker  
Dolby Digital  
English  
On  
Audio  
Select  
Exit  
Audio  
Select  
Exit  
ꢄ
The AUDIO menu includes the following options:  
Bass  
Controls the relative intensity of lower-pitched sounds  
Controls the relative intensity of higher pitched sounds  
Treble  
Balance  
Adjusts the relative volume of the speakers in a multiple speaker  
system  
Sound Effect  
MTS  
Allows selection of an audio-enhancement technique from among the  
following options: Surround/Live/Dance/Techno/Classic/Soft/Rock/  
POP/Off  
Allows you to listen to high-fidelity stereo sound while watching TV  
▪ Stereo:  
Use separate audio tracks for left and right speakers, if available  
▪ SAP:  
You can enjoy a second audio program from the speakers while  
watching a scene in the original program  
▪ Mono:  
Allows mono output (useful when stereo is noisy or inconsistent)  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
SPDIF Type  
Allows to selection of the digital sound format: PCM/OFF/Dolby  
Digital  
▪
▪
▪
PCM:  
The external audio system is connected to the AUDIO OUT (L/R)  
of the LCD TV  
Dolby Digital:  
The external audio system is connected to the AUDIO OUT  
DIGITAL (OPTICAL or COAXIAL) ot the LCD TV  
OFF:  
Select OFF to turn off the external audio system  
Audio Language  
Speaker  
Allows to select the audio language:English/Spanish/French.  
Allows to select to turn on or off the TV speakers.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Customizing the TV Settings  
ꢃ
ꢁ
Press the button to turn the LCD TV on.  
Press the MENU button on the remote control to display the Main menu, and use the  
◄► buttons to select the TV.  
ꢂ
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons  
changes the setting, and press the MENU exits the menu.  
Channel Scan  
Tuner Mode  
Channel Skip  
Time Zone  
Cable  
Eastern Time  
TV  
Select  
Exit  
ꢄ
The TV menu includes the following options:  
Channel Scan  
Tuner Mode  
Press the OK button, the Channel Scanning automatically  
creates a list of receivable channels.  
Allows selection between CATV cable and antenna signal sources:  
▪ AIR  
Choose this setting if you are receiving TV channels with an antenna  
(over the air)  
▪ Cable  
Choose this setting if you are receiving TV channels with a CATV  
(cable TV)  
Channel Skip  
Allows addition/removal of channels on the channel list.  
ꢃPress the OK button to display the Channel Skip menu:  
2
3
4
5
6
7
8
9
ABC  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
DISC  
10  
Channel Skip  
Select  
Exit  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
ꢁPress the ▼ button to select the desired channel, andpress the  
OK button repeatedly to select show (ꢀ) or hide(ꢈ)  
Time Zone  
Allows selection of regional TV systems of USA: Eastern Time/  
Indiana/Central time/Mountain Time/Arizona/Pacific Time/Alaska/  
Hawaii  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Customizing the SETUP Settings  
ꢃ
ꢁ
Press the button to turn the LCD TV on.  
Press the MENU button on the remote control to display the Main menu, and use the  
◄► buttons to select the SETUP.  
ꢂ
Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to  
change the setting, and press the MENU to exit the menu.  
▪
If the signal source is TV, the SETUP MENU  
appears as:  
▪
If the signal source is HDMI/VGA/Video/S-Video/  
YPbPr, the SETUP MENU appears as:  
OSD Language  
Time Setup  
Closed Caption  
Parental  
English  
Middle  
OSD Language  
Time Setup  
Parental  
English  
Middle  
Gamma  
Gamma  
Reset Default  
Reset Default  
Setup  
Select  
Exit  
Setup  
Select  
Exit  
ꢄ
The SETUP menu includes the following options:  
OSD Language  
Closed Caption  
Selects to display all on-screen menus in your language of choice:  
English/French/Spanish  
Allows to select from analog or digital closed caption modes and  
press the OK button. The Closed Captain list appears:  
Analog Cloaed Caption  
Digital Cloaed Caption  
Digital Caption Style  
Off  
Off  
Closed Caption  
Select  
Exit  
ꢃAnalog Closed Caption:  
Press the ◄► buttons to select the basic analog closed caption  
options: OFF/CC1/CC2/CC3/CC4  
▪
CC1 /CC2 /CC3 /CC4:  
Display a printed version of the dialog and sound effects of the  
program being viewed  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
▪
▪
T1/T2:  
Display station information presented using either half or the  
whole screen  
T3/T4:  
Extended Data Services. For example: Network name, program  
name, program length, etc.  
ꢁDigital Closed Caption:  
Press the◄►buttons to select the digital closed caption option.  
Note: The setting here will be applied to each DTV channel  
ꢂCaption Style:  
Press OK button to customize the settings for digital closed  
caption option:  
Caption Style  
Font Size  
Custom  
Large  
Font Color  
White  
Font Opacity  
Solid  
Background Color  
Background Opacity  
Window Color  
Window Opacity  
Black  
Solid  
Black  
Translucent  
Closed Caption Style  
Select  
Exit  
Parental  
The Parental Control can be set up to the TV to block Channel,  
Video Source and to change password.  
ꢃUse the ▼ button to select the Parental, and press the OK to  
display the Parental menu  
ꢁUse the Program Block function, must enter a four-digit  
password. The factory password is 0000  
ꢂThe Parental list appears:  
ꢅ
Program Block  
Allows to setup the TV and MPAA Rating  
Lock options (refer to “Using the Program  
Block Setting”).  
U.S.TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Block MPAA Unrated  
Block TV Unrated  
NO  
NO  
Parental Block  
Select  
Exit  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
ꢅ
Channel Block  
Allows to block digital channels.  
2
3
4
5
6
7
8
9
ABC  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
Analog  
DISC  
10  
Channel Block  
Set OK Select  
Exit  
ꢅ
Input Block  
Selects to block a Input source signal  
1
2
3
4
5
6
7
8
6
7
8
TV(CABLE/AIR)  
VIDEO1 (AV)  
VIDEO2 (S-VIDEO)  
VIDEO3 (YPbPr1)  
VIDEO4 (YPbPr2)  
DVD  
USB  
CARD READER  
VIDEO5 (HDMI1)  
VIDEO6 (HDMI2)  
COMPUTER(VGA)  
Input Block  
Set OK Select  
Exit  
ꢅ
Change Password  
Selects to change your password  
Gamma  
Allows adjustment of the display’s gamma correction, which  
finetunes both brightness and red/green/blue ratios: On/Off/Middle/  
Bright/Dark  
Reset Default  
Press the OK button to restore factory settings  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Using the Program Block Settings  
ꢃ
ꢁ
Press the MENU button on the remote control to display the Main menu, and use the  
◄► buttons to select the SETUP.  
Use the ▼ buttons to highlight Parental, and press the OK button.  
OSD Language  
Closed Caption  
Parental  
English  
Middle  
Gamma  
Reset Default  
Setup  
Select  
Exit  
ꢂ
ꢄ
Use the Parental function, must enter a four-digit password. The factory password is  
0000.  
Program Block  
Channel Block  
Password  
****  
Input Block  
Change Password  
Parental  
Select  
Exit  
Parental  
Select  
Exit  
Use the ▼ button to select the Program Block, and press the OK to display the  
Program Block menu.  
U.S.TV Ratings  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Block MPAA Unrated  
Block TV Unrated  
NO  
NO  
Program Block  
Select  
Exit  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
ꢇ
The Parental block menu includes the following options:  
U.S. TV Ratings  
Selects to activate the TV Rating programs.  
Selects to activate the MPAA Rating programs  
U.S. Movie Ratings  
Canadian English Ratings  
Canadian French Ratings  
Block MPAA Unrated  
Selects to activate the English Rating programs of Canada.  
Selects to activate the French Rating programs of Canada  
▪ YES:  
Block all movies that are broadcast without a MPAA rating.  
▪ NO:  
Allows all movies that are broadcast without a MPAA rating  
Block TV None Rating  
▪ YES:  
Block all movies that are broadcast without a TV rating.  
▪ NO:  
Allows all movies that are broadcast without a TV rating.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
U.S. TV Ratings  
The U.S.TV Rating has 2 rating methods: Content-Based Rating and Age-Based Rating.  
The U.S.TV Rating includes the following options:  
A
D
L
S
V
FV  
TV-Y  
Note:  
TV-Y7  
TV-G  
When a channel is blocked the user can  
unblock the channel by entering the password.  
Press the OK button and enter the password  
to watch that channel. Once the channel is  
changed and you return to it, they must re-  
enter the password.  
TV-PG  
TV-14  
TV-MA  
Allowed Rating  
Blocked Rating  
U.S. TV Ratings  
Set OK Select  
Exit  
AGE-BASED  
RATING  
TV-Y  
DESCRIPTION  
All children  
TV-Y7  
Directed to children age 7 and older  
General Audience  
TV-G  
TV-PG  
TV-14  
Parental Guidance suggested  
Parents strongly cautioned  
Mature Audience only  
TV-MA  
CONTENT-BASED  
RATING  
DESCRIPTION  
FV  
D
Fantasy violence  
Suggestive dialogue  
Strong language  
Sexual situations  
Violence  
L
S
V
ALL  
All contents are blocked  
CONTENT-BASED  
FV  
D
L
S
V
TV-Y  
TV-Y7  
TV-G  
ꢇ
TV-PG  
TV-14  
TV-MA  
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ
ꢇ: To block programs by both content and age.  
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to  
select BLOCK or UNBLOCK  
.
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Using the LCD TV  
Canadian English Ratings  
The Canadian Englsh Ratings includes the following options:  
G
C8+  
G
PG  
14+  
18+  
Allowed Rating  
Blocked Rating  
Canadian English Ratings Set OK Select  
Exit  
RATING  
DESCRIPTION  
All children  
G
C8+  
G
Children 8 years and older  
General programming  
Parental guidance  
PG  
14+  
18+  
Viewers 14 and older  
Adult programming  
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to  
select BLOCK or UNBLOCK  
.
Canadian French Ratings  
The Canadian French Ratings includes the following options:  
G
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Allowed Rating  
Blocked Rating  
Canadian French Ratings  
Set OK Select  
Exit  
RATING  
DESCRIPTION  
G
General programming  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
Not recommended for ages under 8  
Not recommended for ages under 13  
Not recommended for ages under 16  
Programming restricted to adults.  
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to  
select BLOCK or UNBLOCK  
.
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
U.S. Movie Ratings  
The U.S. Movie Ratings is used for original movies rated by the Motion Picture Association of  
America(MPAA) as broadcasted on cable TV and not edited for television.  
The U.S. Movie Ratings includes the following options:  
G
PG  
PG-13  
R
NC-17  
X
Allowed Rating  
Blocked Rating  
Canadian English Ratings  
Select  
Exit  
RATING  
DESCRIPTION  
G
General Audiences. Movie is appropriate for all ages  
PG  
Parental Guidance Suggested. May contain material not suited for younger  
viewers  
PG-13  
R
Contains content that may not be appropriate for viewers under the age of  
13  
Restricted. Contains adult content, no one under 17 admitted without  
parent  
NC-17  
X
No one 17 and under admitted  
No one 17 and under admitted  
Use the ◄►▲▼ buttons to select the rating you want and press the OK button repeatedly to  
select BLOCK or UNBLOCK  
.
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
SPECIFICATIONS  
MODEL  
TDA-03211C  
LCD Panel  
Panel Size  
32” TFT LCD  
Brightness  
500 cm2  
Contrast Ratio  
1200:1  
Max. Resolution  
1366x768  
Input Connector VIDEO/AUDIO(L/R)  
S-VIDEO/AUDIO(L/R)  
YPbPr/AUDIO(L/R)  
VGA/AUDIO(L/R)  
HDMI/AUDIO(L/R)  
AUDIO OUT(L/R)  
OPTICAL/COAXIAL  
HEADPHONE  
2
1
2
1
2
1
1
1
Built-in DVD  
1
USB Connector  
1
SD Card Reader  
Power Source  
1
AC100~240V, 50/60HZ, 4.0A  
180 W, standby < 1 W  
31.7 w x 25.0 h x 8.4 d inch  
39.5 LB  
Power Consumption  
Dimension  
WEIGHT  
20070411  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
PROGRAMMING YOUR REMOTE CONTROL  
Your remote lets you control four devices with one easy-to-use, compact unit. After installing  
batteries, you can program the remote to control your Universal TV, VCR or DVD, Cable or Satellite  
Receivers, Amplifi er or Tuner, and Auxiliary devices. To do so, follow the instructions in  
“Programming a Device”. For best results, please read and follow all the remaining instructions.  
Keep this guide for future reference.  
A Quick Look at Programming a Device  
To control VCR or DVD, Cable or Satellite Receivers, Amplifi er or Tuner, and Auxiliary devices,  
follow these steps. Before proceeding, fi nd the codes for the devices you want to program in  
“Manufacturer’s Codes” on the right side of this page and write them down or highlight them.  
To program a DVD Player, TV/DVD Combo, TV/VCR/DVD Combo, portable DVD  
player, or mobile DVD player, use the DVD key.  
ꢃ
Turn on the device (for example, DVD player) and, if needed, load media (for  
example, a DVD).  
ꢁ
ꢂ
ꢄ
Press a device key (VCR/DVD, CBL/ SAT, or AUX).  
Press and hold SET UP until the red LED blinks twice; then release.  
Enter the first five-digit code for your device. The LED blinks once as each digit is  
entered. If the code is correct, the LED blinks twice.  
If the LED does not blink twice, repeat steps 2 to 4 and try entering the  
code again.  
ꢇ
ꢈ
Aim the remote at the device and press . The device should turn off. If it does not,  
repeat steps 3–5, trying each code for your brand until you find one that works. If  
you cannot find a code that works, see “Searching for Your Code”.  
Repeat steps 1–5 for the other devices you want to control. For future reference,  
write down each working device code below:  
AUX Code:  
CBL Code:  
CD Code:  
DVD Code:  
SAT Code:  
TNR Code:  
VCR Code:  
ꢆ
Press set to save and exit.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Searching for your Code  
If your device does not respond to the remote after trying all codes listed for your brand, or if  
your brand is not listed, try searching for your code:  
ꢃ
ꢁ
ꢂ
Press a device key once.  
Press and hold SET UP until the red LED blinks twice; then release.  
Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio).  
The LED blinks twice.  
ꢄ
Aim the remote at the device and press . The remote sends IR codes from its  
library to the selected device, starting with the most popular code first. If the device  
responds, go to step 7.  
ꢇ
If the device does not respond, press CH▲. The remote will try the next code.  
Continue until the device responds. Press CH▼ to try the previous code.  
ꢈ
ꢆ
To search for other device codes, repeat steps 1 to 5.  
Press SET UP to save and exit.  
Checking the Codes  
If you have set up the remote using the procedure in “Searching for Your Code”, you may need to find  
out which four-digit code is operating your equipment.  
For example, to fi nd out which code is assigned to your TV:  
ꢃ
ꢁ
ꢂ
ꢄ
Press TV once.  
Press and hold SET UP until the red LED blinks twice; then release.  
Enter 9-9-0. The LED blinks twice.  
To view the code for the first digit, press 1. Count the LED blinks (for example, three  
blinks = 3), and write down the number in the appropriate code listing in step 8  
under “Programming a Device”.  
If a code digit is 0, the LED does not blink.  
ꢇ
Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the  
third digit, 4 for the fourth digit, and 5 for the fi fth digit.  
Changing Volume Lock  
The remote comes preset to allow independent volume control of each selected device (Global Volume  
Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that one  
device’s volume will control volume in all other modes. After that, you can perform Individual Volume  
Unlock on a selected device to set its volume control for independent operation or Global Volume  
Unlock to remove all volume locking.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Changing Volume Lock  
The remote comes preset to allow independent volume control of each selected device (Global  
Volume Unlock). However, you may change the Volume Lock setting to Global Volume Lock so that  
one device’s volume will control volume in all other modes. After that, you can perform Individual  
Volume Unlock on a selected device to set its volume control for independent operation or Global  
Volume Unlock to remove all volume locking.  
LockingVolume Control to One Mode (GlobalVolume Lock)  
ꢃ
ꢁ
Press and hold SET UP until the red LED blinks twice; then release.  
Enter 9-9-3 and then press the mode key for the device you want to control volume (for  
example,TV). The LED blinks twice. Now when you press VOL+, VOL-, or Mute, the selected  
device (for example, TV) will control the volume regardless of the current mode.  
Unlocking AllVolume Control (Restoring Global Unlock)  
ꢃ
ꢁ
Press and hold SET UP until the red LED blinks twice; then release.  
Enter 9-9-3 and then press VOL+. The LED blinks four times.  
Volume is now independently controlled for all programmed devices.  
Unlocking a Single Device’s Volume Control  
ꢃ
ꢁ
ꢂ
Press a device key (TV, VCR/DVD, CBL/ SAT, or AUX).  
Press and hold SET UP until the red LED blinks twice; then release.  
Enter 9-9-3 and then press VOL-. The LED blinks four times. Volume is now  
independently controlled for the selected devices.  
Troubleshooting  
PROBLEM  
SOLUTION  
LED does not blink when you press a key.  
ꢅ Replace battery with new AAA size battery.  
LED blinks when you press a key, but  
device does not respond.  
ꢅ Make sure the remote is aimed at your device and is not more  
than 15 feet away  
LED blinks one long blink.  
ꢅ An entry error has occurred (for example, wrong key). Try entry  
sequence again.  
Remote does not control devices or  
commands are not working properly.  
ꢅ Try all listed codes for the device. Make sure the device operates with  
an infrared remote control.  
CH▲, CH▼, and LAST do not work for your ꢅ Due to RCA design from 1983 to 1987, only the original remote  
RCA TV.  
control will operate these functions.  
No volume on a device.  
Channels do not change properly.  
ꢅ See “Changing Volume Lock”.  
ꢅIf the original remote control required you to press Enter to  
change channels, press Enter on this remote after entering the  
channel number.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer’s setup codessetup codes  
Audio Amplifiers  
Manufacturer  
Code  
Manufacturer  
Code  
Modulaire  
NEC  
0395  
0264  
Adcom  
Aiwa  
0577, 1100  
0406  
Naim  
0269  
Arcam  
0269  
Nakamichi  
Optimus  
Panasonic  
Pass Labs  
Philips  
Pionee  
Polk Audio  
RCA  
0321  
Bose  
Carver  
0674  
0892, 0269  
0160  
0300  
0160  
1561  
0647  
0078  
0269  
0013, 0300, 0823, 0395  
0308, 0521  
0269  
0892, 0269  
0013, 0300, 0823  
0892, 0269  
0013, 0300, 0823  
0395  
Cinema Sound  
Curtis Mathes  
Denon  
Durabrand  
Elan  
GE  
RadioShack  
Realistic  
Revox  
Grundig  
Harman/Kardon  
JVC  
0013, 0395, 0220  
0269  
0892  
331  
Sansui  
Shure  
0321  
0264  
Left Coast  
Lenoxx  
0892  
1561  
Sony  
0815, 0220, 0689  
0078  
0308, 0521  
0331  
0013, 0078  
0354, 0133  
Linn  
0269  
0165  
0269  
0892, 0269, 0321  
0251  
Soundesign  
Technics  
Victor  
Wards  
Yamaha  
Luxman  
Magnavox  
Marantz  
McIntosh  
Micromega  
0269  
Cable Converters  
Manufacturer  
Code  
Manufacturer  
Code  
Nova Vision  
Novaplex  
Pace  
Panasonic  
Paragon  
Penneys  
Philips  
0008  
0008  
A-Mark  
ABC  
Accuphase  
Acorn  
Action  
Active  
Americast  
Archer  
0008, 0144  
0237, 0003, 0008  
0003  
0237  
0237  
0237  
0899  
0237  
0877, 1877, 0237, 0008  
0000, 0008, 0144, 0107  
0000, 0008, 0525  
0000  
1305, 0317  
0877, 1877, 0144, 0533  
Pioneer  
Pulsar  
0000  
BCC  
0276  
Quasar  
Regal  
Runco  
Samsung  
Scientifi c Atlanta  
0000  
0276, 0279  
0000  
0003, 0144  
0877, 1877,0477,  
0237, 0003, 0000, 0008  
1006  
Bell South  
British Telecom  
Century  
Digeo  
Director  
Fosgate  
GE  
0899  
0003  
0008  
1187  
0476  
0276  
0144  
Son  
Sprucer  
Starcom  
Supercable  
Time Warner cable  
Torx  
0144  
0003  
0276  
1877  
0003  
0000  
General Instrument  
Gibraltar  
GoldStar  
Hamlin  
Hitachi  
Insight  
0476, 0810, 0276, 0003  
0003  
0144  
0009  
0003, 0008, 0009  
0476, 0810  
Toshiba  
US Electronics  
United Cable  
Videoway  
Zenith  
0276, 0003, 0008  
0276, 0003  
0000  
Jerrold  
0476, 0810, 0276, 0003  
0000  
0003  
Memorex  
Mitsubishi  
Motorola  
0000, 0008, 0525, 0899  
0476, 1376, 0810, 0276, 1187  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Audio Amp/Tuners  
Manufacturer  
Code  
0531  
1077  
1563, 1615  
1243, 1405,1388, 1641,  
0189, 0121, 0405, 0158  
1255, 1512, 0244, 0346  
1390  
Manufacturer  
Kenwood  
Code  
1313, 1570,1569, 0186,  
ADC  
AMC  
AMW  
Aiwa  
0042, 0239, 0027, 0077  
1497, 1366, 0424  
1293  
0181  
1798  
1437  
1076  
0189  
1497  
0195  
0195  
0039, 0346  
1189, 1269, 0531,1266,  
0189, 1514, 0195,  
0391,1120  
Koss  
LG  
LXI  
Akai  
Alco  
Lasonic  
Lenoxx  
Lexicon  
Linn  
Liquid Video  
Lloyd’s  
Lloyds  
MCS  
Amphion Media Works 1563, 1615  
Anam  
Apex  
Apex Digital  
Arcam  
Audiotronic  
Audiovox  
B & K  
1609, 1074  
1257  
1774, 1257, 1430  
1189, 1120  
1189  
1390, 1627  
0820, 0840, 0701, 0702  
0702  
Magnavox  
BK  
Bose  
Brix  
Cairn  
1229, 0639, 1253  
1602  
0189  
Marantz  
1189, 1269, 0891, 0189,  
1289, 1120, 0039  
289  
1189, 0189  
1393  
McIntosh  
Micromega  
Mitsubishi  
Modulaire  
Myryad  
Cambridge Soundworks 1370  
Capetronic  
Carver  
0531, 0195  
1189, 0189, 0121, 1289,  
0042, 0360, 0008  
0195  
1189  
Casio  
0195  
NAD  
0320  
Clarinette  
Classic  
Coby  
0195  
1352  
1389  
Nakamichi  
New Castle  
Nikko  
1313, 0097, 1555, 0347  
0502  
0322  
Compaq  
Criterion  
Curtis Mathes  
Daewoo  
Dell  
1136  
1420  
0014, 0080, 0039  
1250  
1383  
Nikkodo  
Norcent  
Nova  
0322  
1389  
1389  
Onkyo  
0842, 0135, 1320, 1298,  
1531  
Delphi  
Denon  
1414  
Optimus  
1023, 0531, 0014,1074,  
0670, 0121, 0186, 0080,  
0195, 0738, 0801, 0042,  
0181, 0502, 0219, 0158,  
0074, 0163, 0177  
1497, 1366  
1142, 1360, 1306, 0121,  
0004  
Emerson  
Fisher  
0531, 0195, 0424  
1801, 0801, 0042, 0360,  
0219, 0008  
0463, 0424  
1517, 1567  
1352, 1532  
0189  
0110, 1304, 1306, 0891,  
0189, 1289  
1181  
1273, 1801  
1426  
0491  
0842, 0135, 1320, 1298  
0110, 1306  
1058, 1374, 1495, 1811,  
0074  
1428, 1390, 1412  
1390  
Oritron  
Outlaw Audio  
Panasonic  
Garrard  
Gateway  
Go Video  
Grundig  
Harman/Kardon  
0391  
1308, 1518, 1548,1288,  
1316, 1763, 1764, 1633,  
0309, 0367, 0039  
0195  
Penney  
Penneys  
Philips  
0195, 0039  
Hewlett Packard  
Hitachi  
Initial  
Inkel  
Integra  
JBL  
1189, 1269, 0891,1266,  
0189, 0391, 1120  
1023, 1384, 0531, 0014,  
0150, 0630, 0080, 0801,  
0244, 0346  
1508  
0189, 1289, 1414  
1254, 0054  
Pioneer  
Polaroid  
Polk Audio  
Proscan  
Quasar  
RCA  
JVC  
KLH  
Kawasaki  
0039  
1023, 1609, 1254, 0531,  
1511, 1390, 1074, 0080,  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Audio Amp/Tuners  
Manufacturer  
Code  
1609, 0181  
1609, 0121, 0186, 0195,  
0042, 0181, 0158, 0163,  
0177  
1437  
0189  
1869, 1383  
1383  
1519  
Manufacturer  
Sony  
Code  
RadioShack  
Realistic  
1058, 1441, 1258, 1759,  
1758, 1622, 1858, 1658,  
1558, 1406, 0405, 0474,  
1349, 1442, 0158  
0670  
Regent  
Revox  
Rio  
Rio Audio  
Saba  
Soundesign  
Stereophonics  
Sunfire  
1023  
1313  
Teac  
1267, 1390,1074, 1528,  
0463, 0163  
Samsung  
Sansui  
Sanyo  
1295, 1500  
1189, 0189, 0346  
1801, 1469, 1251, 0801,  
0360, 0219  
0322, 0163  
0195, 0424  
0186, 1286  
1556  
Technics  
1308, 1518,1633, 0309,  
0039  
1189  
0842, 0135, 0080  
1390  
0074  
Thorens  
Toshiba  
Venturer  
Victor  
Waitec  
Wards  
Scott  
Sears  
Sharp  
Sharper Image  
Sherwood  
1352  
0014, 0189,0080, 0042,  
0054, 0158  
1406, 1414  
1077, 1653, 0491, 0502,  
1423  
XM  
Shinsonic  
Siemens  
Sirius  
1426  
0424  
1811, 1602, 1627  
1869, 1532, 1383  
Yamaha  
1023, 0176,1176, 1375,  
1331, 1276, 0186  
0195  
Yorx  
Sonic Blue  
Zenith  
1293, 0857, 0346  
Miscellaneous Audio  
Manufacturer  
Altec Lansing  
Cambridge Soundworks 1530  
Creative  
D-Link  
Imerge  
Integra  
Jerrold  
Code  
Manufacturer  
Code  
1485  
Marantz  
Motorola  
Netgear  
Omnifi  
Onkyo  
SSI  
1491  
1464  
1785  
1605  
1789  
1522  
1809, 1810  
0872  
1522  
1491  
1789  
0520  
Yamaha  
Satellite Receivers  
Manufacturer  
Code  
Manufacturer  
Code  
AlphaStar  
Bell ExpressVu  
Chaparral  
DirecTV  
0772  
0775  
0216  
GE  
GOI  
0566, 0392  
0775, 1775  
General Instrument  
Goodmans  
HTS  
Hitachi  
Houston tracker  
Hughes  
0869  
0566, 0639, 1639, 1640,  
0247, 0749, 1749, 1142,  
1442, 0724, 0819, 1856,  
1108,1609, 0392, 1392,  
1076, 0099  
1246  
0775, 1775  
1250, 0749, 0819  
0775  
0749, 1749, 1142, 1442  
Dish Network  
Dish Network System  
Dishpro  
Echostar  
Expressvu  
0775  
Hughes Network Systems  
Innova  
JVC  
Jerrold  
LG  
0749,1749, 1142, 1442  
0099  
0775, 1775  
0869  
1226  
0775, 1775, 1005, 1505  
0775, 1775, 1005, 1505  
0775, 1775, 1005, 1505  
0775, 1775  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
0724, 0722  
0869  
0724  
0749  
0869, 0856  
1270  
Manufacturer  
RCA  
Code  
0566, 1142, 1442, 0775,  
0143, 0855, 0392, 1392  
0566, 0775, 0869  
0856, 0099  
Magnavox  
McIntosh  
Memorex  
Mitsubishi  
Motorola  
NEC  
RadioShack  
SKY  
Samsung  
1142, 1442, 1276, 1108,  
1609  
Netsat  
0099  
Sanyo  
1219  
Next Level  
Optimus  
Panasonic  
Paysat  
0869  
0724  
0701, 0247  
0724  
0749, 1749, 1142, 1442,  
0775, 0724, 0722, 0819,  
1076, 0099  
1142, 1442  
0869  
Sony  
0639, 1639, 1640  
0869  
0772, 0869  
0566, 0392  
1142, 1442  
0749, 1749, 0790, 1285,  
0819  
1640, 1392  
0724, 0722  
0869  
Star Choice  
Star Trak  
Thomson  
Tivo  
Philips  
Toshiba  
Pioneer  
Primestar  
Proscan  
UltimateTV  
Uniden  
Voom  
0566, 0392  
Zenith  
0856, 1856  
TVs  
Manufacturer  
Code  
Manufacturer  
Code  
A-Mark  
AOC  
Accuscan  
Action  
0047, 0054  
0180, 0030  
0047  
0030  
0463, 0180, 0047,0054,  
0017, 0051, 0093  
0761, 0783, 0815,0817,  
Bell & Howell  
Bell and Howell  
BenQ  
Bradford  
Brockwood  
Broksonic  
CXC  
0054, 0154, 0093  
0054, 0154, 0093  
1756, 1032  
0180  
0030, 0178  
0236, 0463, 0180  
0180  
Admiral  
Advent  
0842  
Candle  
0030  
Adventuri  
Agna  
Aiko  
0000  
0150  
0092  
Capehart  
Capetronic  
Carnivale  
Carver  
0017, 0030, 0178, 0092  
0030  
0030  
Akai  
0060, 0702,0672, 0030,  
0054  
0145, 0812  
0700, 0843  
Celebrity  
Celera  
0000  
0765  
Albatron  
Alfi de  
Alleron  
Ambassador  
America Action  
American High  
Amstrad  
0672  
0030  
0150  
0180  
0000, 0060  
0171  
Changhong  
Cineral  
Citek  
0156,0765, 0783, 0767  
0451, 0092  
0047  
0054, 0000, 0451, 0463,  
0180,0060, 0030, 0092,  
0171  
Citizen  
Amtron  
0000, 0180  
Clarion  
0180  
Anam  
Apex  
Apex Digital  
0180  
0156, 0748, 0765  
0156, 0748, 0765,0879,  
0767  
Classic  
Colortyme  
0030, 0092  
0047, 0054, 0017, 0060,  
0030, 0178  
0047, 1447  
0178  
Commercial Solutions  
Conic  
Contec  
Craig  
Crosley  
Audinac  
Audiovox  
Aumark  
Aventura  
Baysonic  
Beaumark  
Belcor  
0180  
0451, 0180, 0092, 0623  
0060  
0171  
0180  
0017, 0030, 0178  
0030  
0180  
0180, 0171  
0054, 0000, 0180, 0030,  
0171  
0093, 0180, 0672  
0672  
Crown  
Crown Mustang  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
Manufacturer  
Curtis Mathes  
Code  
0047, 0054, 0154, 0000,  
0051, 0451, 0093, 0180,  
0060, 0702, 0030, 0178,  
0145, 0166, 1147, 1347  
0451, 1661, 0672, 0178,  
0092, 0623, 1755,1756,  
0661  
American High  
Amstrad  
Amtron  
Anam  
Apex  
0000, 0060  
0171  
0000, 0180  
0180  
0156, 0748, 0765  
0156, 0748, 0765, 0879,  
0767  
Daewoo  
Apex Digital  
Dayton  
Daytron  
Dell  
0092  
0030, 0178, 0092  
1454  
Audinac  
Audiovox  
Aumark  
0180  
0451, 0180, 0092, 0623  
0060  
Denon  
Dumont  
Durabrand  
0511, 0145  
Aventura  
Baysonic  
Beaumark  
Belcor  
0171  
0180  
0017, 0030, 0178  
0030  
0017, 0180, 0178  
0463, 0180, 0178, 0171,  
1034, 1463  
Dwin  
ESA  
Eaton  
Electroband  
Electrograph  
Electrohome  
0093  
0171, 0812  
0060  
0000  
Bell & Howell  
Bell and Howell  
BenQ  
Bradford  
Brockwood  
Broksonic  
CXC  
0054, 0154, 0093  
0054, 0154, 0093  
1756, 1032  
0180  
0030, 0178  
0236, 0463, 0180  
0180  
1755  
0154, 0000, 0150,0030,  
0178  
Emerald  
Emerson  
0178  
Candle  
0030  
0047, 0154, 0451, 0236,  
0463, 0180, 0150, 0178,  
0171, 0623  
0030  
0054, 0154, 0000  
0093  
0000, 0180, 0171  
0180  
0047, 0000, 0051,0451,  
0060, 0030, 0178, 1147,  
1347, 1447  
1755, 1756  
0047  
0017, 0000, 0030  
0017, 0030Go  
0047, 0054  
Capehart  
Capetronic  
Carnivale  
Carver  
Celebrity  
Celera  
Changhong  
Cineral  
Citek  
0017, 0030, 0178, 0092  
0030  
0030  
0054  
0000  
Envision  
Fisher  
Fortress  
Funai  
Futuretech  
GE  
0765  
0156, 0765, 0783, 0767  
0451, 0092  
0047  
0054, 0000, 0451, 0463,  
0180,0060, 0030, 0092,  
0171  
Citizen  
Gateway  
Gemini  
Gibraltar  
Gibralter  
A-Mark  
AOC  
Clarion  
Classic  
Colortyme  
0180  
0030, 0092  
0047, 0054, 0017, 0060,  
0030, 0178  
0180, 0030  
Commercial Solutions  
0047, 1447  
Accuscan  
Action  
Admiral  
0047  
0030  
Conic  
Contec  
Craig  
0178  
0180  
0463, 0180, 0047, 0054,  
0017, 0051, 0093  
0761, 0783, 0815, 0817,  
0842  
0000  
0150  
0180, 0171  
0054, 0000, 0180, 0030,  
0171  
0093, 0180, 0672  
0672  
0047, 0054, 0154, 0000,  
0051, 0451, 0093, 0180,  
0060,0702, 0030, 0178,  
0145, 0166, 1147, 1347  
0451, 1661, 0672, 0178,  
0092, 0623, 1755, 1756,  
0661  
Crosley  
Advent  
Crown  
Crown Mustang  
Curtis Mathes  
Adventuri  
Agna  
Aiko  
0092  
Akai  
0060, 0702, 0672, 0030,  
0145, 0812  
0700, 0843  
0672  
0030  
Albatron  
Alfi de  
Alleron  
Daewoo  
Ambassador  
America Action  
0150  
0180  
Dayton  
Daytron  
0092  
0030, 0178, 0092  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
0700, 0843  
Manufacturer  
Code  
1454  
Dell  
Monivision  
Motorola  
Multitech  
NAD  
Denon  
Dumont  
Durabrand  
0511, 0145  
0054, 0051, 0093, 0150  
0180  
0156, 0178, 0166, 1156,  
0866  
0017, 0180, 0178  
0463, 0180, 0178, 0171,  
1034, 1463  
Dwin  
ESA  
0093  
0171, 0812  
NEC  
NTC  
0047, 0030, 0178, 1704  
0092  
Eaton  
0060  
0000  
1755  
NetTV  
Nikko  
1755  
Electroband  
Electrograph  
Electrohome  
0047, 0017, 0154, 0156,  
0030, 0178, 0092, 1347  
0030, 0178, 0092  
0030  
0154, 0000, 0150, 0030,  
0178  
Nikkodo  
Nishi  
Emerald  
Emerson  
0178  
Norcent  
Nyon  
Onwa  
0748  
0000  
0180  
0047, 0154, 0451,0236,  
0463, 0180, 0150, 0178,  
0171, 0623  
0030  
0054, 0154, 0000  
0093  
0000, 0180, 0171  
0180  
0047, 0000, 0051, 0451,  
0060, 0030, 0178,  
1147,1347, 1447  
1755, 1756  
Optimus  
0154, 0250, 0093,0180,  
0150, 0030, 0178, 0166,  
0650, 0679  
Envision  
Fisher  
Fortress  
Funai  
Futuretech  
GE  
Optonica  
Orion  
0093  
0017, 0236, 0463, 0180,  
0178, 1463  
0156, 0060  
PCE  
Pace  
Panasonic  
0092  
0047, 0054, 0154, 0000,  
0156, 0051, 0250, 0093,  
0236, 0150, 0060, 0053,  
0030, 0178, 0145,1347,  
0650  
Gateway  
Gemini  
Gibraltar  
Gibralter  
Video  
0047  
0017, 0000, 0030  
0017, 0030Go  
0060  
Panda  
0706  
GoldStar  
Goodmans  
Gradiente  
Logik  
MGA  
MGN Technology  
MTC  
0047, 0054, 0030, 0178  
0360  
0053  
0236, 0180  
0150, 0030, 0178  
0178  
0180, 0060, 0030, 0092  
0054,0000, 0156, 0093,  
0030, 0092  
0047, 1454, 0054,0154,  
0000, 0051, 0250, 0180,  
0060, 0030, 0092, 0171,  
0706, 1254, 1755  
0017  
1454, 0054, 0030  
0051, 0250, 0650  
1755, 1756  
1755  
0700  
0047, 0178, 0145  
0154, 0463,0180, 0150,  
0060, 0030, 0178  
0150  
0047, 0017, 0051  
0154, 0093, 0150, 1250,  
0030, 0178, 0836  
Paxonic  
Penney  
0060, 0030  
0047, 0156, 0051, 0060,  
0030, 0178, 1347  
0047, 0000, 0156, 0051,  
0250, 0060, 0030, 0178  
1523  
0054, 0463, 0030, 0145  
1454, 0054, 0017, 0000,  
0030, 0171, 1254, 0690  
0051, 0060, 0030, 0178  
0166, 0866, 0679  
0765, 0865, 1523  
0451, 0092  
0236, 0180  
0761, 0783, 0815, 0817  
0700  
0051, 0250  
0047, 0030, 1347, 1447  
0178  
Penneys  
Petters  
Philco  
Philips  
Magnasonic  
Magnavox  
Pilot  
Pioneer  
Polaroid  
Portland  
Precision  
Prima  
Princeton  
Prism  
Proscan  
Proton  
Pulsar  
Majestic  
Marantz  
Matsushita  
Maxcent  
Maxent  
Megapower  
Megatron  
Memorex  
0017, 0092  
0178, 0092  
0150, 0178  
0051, 0250, 0650  
Pulser  
Quartz  
Quasar  
Micro Genius  
Midland  
Mitsubishi  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
RCA  
Code  
0090, 1547, 0047, 0054,  
0000, 0051, 0093, 0178,  
1047, 1147, 1247, 1347,  
1447, 0679  
Manufacturer  
Code  
TMK  
TNCi  
TVS  
Tandy  
Tatung  
Teac  
0236, 0180, 0178  
0017  
0463  
0093  
Rabbit  
RadioShack  
0047  
0000, 0051, 1756  
0154, 0706  
0047, 0054, 0017, 0051,  
0250,1347, 0650  
0030  
0051, 0250, 0060  
0054, 0463, 0180, 0150,  
0060, 0178, 0092  
0017  
0047, 0154, 0180, 0150,  
0030, 0178  
0047, 0154, 0180, 0150,  
0030, 0178  
0017, 0060, 0030  
0154, 0171  
0180  
0054  
0748, 0865  
0047, 0030, 1755, 1756  
0047, 0054, 0017, 0154,  
0060, 0702, 0030, 0178,  
1060, 0812  
Technics  
Realistic  
Technovox  
Techwood  
Teknika  
Runco  
SR2000  
SSS  
SV2000  
SVA  
Telecolor  
Telefunken  
Thomas  
Thomson  
Tocom  
0702  
Sampo  
Samsung  
0047, 0178  
0047, 1447  
0156  
0154, 0156, 0150,1265,  
0060, 0145, 0166, 1145,  
1156, 1256, 1356, 1656,  
1704, 0650  
0051  
0178  
0051, 0250  
0092  
0047  
1755, 1756  
0030  
Toshiba  
Sanky  
Sansui  
Sanyo  
0060, 0030  
0463, 0060, 0030  
0088, 0047, 0054, 0154,  
0000, 0463, 0171, 1755  
0060  
Totevision  
Toyomenka  
Truetone  
Ultra  
Universal  
V
Vector Research  
Victor  
Vidikron  
Vidtech  
Viewsonic  
Viking  
Saville  
Scotch  
Scott  
0178  
0236, 0180, 0030, 0178  
0047, 0054, 0017, 0154,  
0000, 0156, 0051, 0093,  
0060, 0053, 0030, 0178,  
0171, 0166  
0054, 0093, 0180  
0093  
0178  
0145  
0054  
0047,0093,0030  
0030, 0178  
0060, 0092  
Sears  
1100, 0053  
0054  
0178  
1755  
0060  
Sharp  
Sheng Chia  
Shivaki  
Siemens  
Signature  
Signature 2000  
Simpson  
Singer  
Visio  
Vizio  
Wards  
1755, 1756  
1756  
0047,0054,0017, 0154,  
0000, 0156, 0051, 0093,  
0236,0180, 0060, 0030,  
0178, 0166, 1147, 1347,  
1156, 0866  
0156  
Solar Drape  
Sony  
0000  
1100, 0017, 0154, 0000,  
0150, 0053  
0180, 178  
0156, 0178  
0171  
0236, 0180  
0843  
0000  
Soundesign  
Spectravision  
Squareview  
Starlite  
Studio Experience  
Supreme  
Waycon  
Welton  
Westinghouse  
White Westinghouse  
World  
XR1000  
Yamaha  
Yorx  
0178  
0451  
0451, 0236, 0463, 0623  
0451, 0236, 0463, 0180  
0154, 0180, 0171  
0030  
Sylvania  
0047, 0054, 0154,0000,  
0051, 0030, 0178, 0092,  
0171  
0030  
Zenith  
0047, 0017, 0000, 0093,  
0463, 0030, 0178, 0145,  
0092, 0171, 1145, 0812  
Symphonic  
0000, 0180, 0178, 0171  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
VCRs  
Manufacturer  
Code  
0184, 0121  
Manufacturer  
Code  
0000, 0037, 0240  
A-Mark  
ABS  
Admiral  
Emerald  
Emerex  
Emerson  
1972  
0032  
0209, 0060, 0048, 0039,  
0047, 0104  
0000, 0037, 0240  
0072  
0124, 0000, 0037  
0175, 0041  
0209, 0072  
1972  
1479, 1278, 0000, 0037,  
0184, 0240, 0121, 0043,  
0209  
0000, 0039, 0047, 0104  
0035, 0033  
0000  
0000, 0037, 0072  
1035, 1060, 0807, 0000,  
0035, 0060, 0048, 0240  
0000  
Adventura  
Adyson  
Aiwa  
Akai  
Alba  
Alienware  
Allegro  
American High  
Amstrad  
Asha  
Fisher  
Fuji  
Fujitsu  
Funai  
GE  
0039  
0035, 0081  
0000  
Garrard  
Gateway  
Gemini  
1972  
0060  
0240  
Astra  
Audiovox  
Avis  
Beaumark  
Bell & Howell  
0035, 0240  
0037  
0000, 0072  
0240  
0000, 0035, 0048, 0039,  
0104  
Genexxa  
Go Video  
GoldStar  
0000, 0037  
0614, 0240  
1237, 0000, 0035, 0037,  
0039  
0081, 0042  
0081  
Granada  
Grundig  
Bell and Howell  
0000, 0035, 0048, 0039,  
0104  
HI-Q  
HP  
0000, 0035, 0047  
1972  
Broksonic  
CCE  
Calix  
1479, 0184, 0121, 0209  
0072  
0037  
Harley Davidson  
Harman/Kardon  
Harvard  
0000  
0081  
0072  
Candle  
Canon  
Carrera  
Carver  
Citizen  
0037  
0035  
0240  
Harwood  
Hewlett Packard  
Hitachi  
0072  
1972  
0089, 0000, 0035, 0037,  
0045, 0042, 0041  
1972  
0739, 0042  
0739  
0035, 0081  
1278, 0000, 0035, 0037,  
0240, 0209  
0037  
0035, 0060, 0045  
0000, 0072  
0037, 0047, 0240, 0072  
0000, 0072  
0000, 0035, 0081  
0072  
1035, 0000, 0035, 0060,  
0162, 0240, 0041  
1972  
0240  
1278, 0037, 0045  
0037  
Howard Computers  
Hughes Network Systems  
Humax  
Hush  
Hytek  
TT Nokia  
JVC  
Janeil  
Jensen  
KEC  
KLH  
KTV  
Classic  
Colortyme  
Colt  
1972  
0000, 0047, 0072I  
0240, 0041  
0067, 0041  
0240  
0067, 0041  
0037  
Craig  
Criterion  
Crosley  
Crown  
Curtis Mathes  
0072  
0000  
CyberPower  
Cybernex  
Daewoo  
Daytron  
Dell  
Kenwood  
Kodak  
LG  
0067, 0041  
0035, 0037  
0037, 0240  
0000, 0037, 0042, 0067  
1972  
0000  
0000, 0240, 0072  
0081  
1972  
0081, 0042  
0041  
0739  
003, 0000  
LXI  
Denon  
Linksys  
Lloyd’s  
Lloyds  
Derwant  
DirecTV  
Dual  
Loewe  
Dynatech  
Electrohome  
0000, 0240  
0000, 0060, 0037, 0240,  
0043, 0209  
0037  
Logik  
M Electronic  
MEI  
0000, 0240, 0072  
0240  
0035  
Electrophonic  
MGA  
0060, 0240, 0043  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
Manufacturer  
Code  
0240  
0000, 0240, 0072  
0000, 0240, 0072  
0000  
1278, 0000, 0037, 0240,  
0072  
0081, 0042  
0081  
0000, 0035, 0047  
1972  
0000  
0081  
0072  
Metz  
0037  
1972  
0240  
1972  
MGN Technology  
MTC  
MTC  
MTX  
Magnasonic  
Microsoft  
Midland  
Mind  
Minolta  
Mitsubishi  
0042  
0807, 0000, 0060, 0048,  
0047, 0042, 0067, 0043,  
0041  
0035, 0048  
0072  
0000, 0039, 0072  
0240, 0104  
0035, 0037, 0039, 0033,  
0042  
0067, 0104, 0041  
0072  
0037  
0037  
0240  
1972  
0240  
1972  
0035, 0162, 0104  
0222  
0000, 0035, 0037,1062,  
0048, 0047, 0162, 0240,  
1479, 0000, 0184, 0240,  
0104, 0121, 0209  
0035  
0225, 1035, 0000, 0614,  
0616, 0035, 1062, 0162  
1237, 1035, 0035, 0037,  
0042, 0240  
Granada  
Grundig  
HI-Q  
HP  
Harley Davidson  
Harman/Kardon  
Harvard  
Harwood  
Hewlett Packard  
Hitachi  
Motorola  
Movie Walker  
Multitech  
NAD  
NAP  
0072  
1972  
NEC  
Newtech  
Nikko  
Nikkodo  
Nishi  
Niveus Media  
Noblex  
Northgate  
Olympus  
Onkyo  
0089, 0000, 0035, 0037,  
0045, 0042, 0041  
1972  
0739, 0042  
0739  
1972  
0000, 0047, 0072  
0037  
Howard Computers  
Hughes Network Systems  
Humax  
Hush  
Hytek  
IKEC  
KLH  
KTV  
Kenwood  
Kodak  
LG  
LXI  
Linksys  
Lloyd’s  
Lloyds  
Loewe  
Logik  
M Electronic  
MEI  
MGA  
MGN Technology  
MTC  
0072  
0000  
Optimus  
0067, 0041  
0035, 0037  
0037, 0240  
0000, 0037, 0042, 0067  
1972  
0000  
0000, 0240, 0072  
0081  
0000, 0240, 0072  
0240  
0035  
0060, 0240, 0043  
0240  
0000, 0240, 0072  
0000, 0240, 0072  
0000  
1278, 0000, 0037, 0240,  
0072  
1781, 0000, 0618, 0035,  
0037, 0048, 0039, 081,  
0240  
0035, 008,0240  
0037  
0037, 0209  
0035, 0081, 0162  
1972  
Orion  
Panama  
Panasonic  
Penney  
Penneys  
0000, 0035, 0037, 0047,  
0081, 0162, 0042, 0067,  
0240  
Pentax  
Philco  
Philips  
0042  
0000, 0035, 0081, 0209  
0000, 0616, 0618, 0739,  
0035, 0048, 0081, 0162,  
0045, 0209  
MTC  
MTX  
Magnasonic  
Pilot  
0037  
Pioneer  
Polk Audio  
Profi tronic  
Proscan  
Protec  
Protech  
Pulsar  
Pulser  
0081, 0162, 0042, 0067  
0081  
0240  
1060, 0060  
0000, 0072  
0072  
0039, 0240  
0240  
0035, 0047  
1035, 0035, 0162  
1035, 1060, 0807, 0000,  
0880, 0035, 0060, 0048,  
0045, 0042, 0240  
Magnavox  
Magnin  
Marant1 Marta  
Matsui  
Matsushita  
Media Center PC  
Memorex  
Quartz  
Quasar  
RCA  
1237, 0000, 0035, 0037,  
0048, 0039, 0047, 0162,  
0240, 0104, 0209, 0072  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
0000, 0240  
Manufacturer  
RadioShack  
Code  
0000, 0035, 0037, 0048,  
0047, 0162, 0240, 0104  
0037  
Symphonic  
Systemax  
TMK  
TNIX  
Tagar Systems  
Tandy  
1972  
0000, 0240  
0037  
Radix  
Randex  
Realistic  
0037  
0000, 0035, 0037, 0048,  
0047, 0162, 0240, 0104,  
0121  
0614, 0616  
1972  
0039  
0042  
0000, 0072  
0000  
0240, 0041  
0067, 0041  
0240  
0067, 0041  
0000,1014, 0739, 0060,  
0045, 0240  
0240  
1972  
0000, 0104  
0000, 0048, 0081, 0067,  
0041  
0000, 0067, 0041  
0000, 0035, 0060, 0037,  
0039, 0162  
0000, 0035, 0037  
0240  
Tatung  
ReplayTV  
Ricavision  
Runco  
STS  
SV2000  
SVA  
TT Nokia  
JVC  
Janeil  
Jensen  
Samsung  
Teac  
Technics  
Teknika  
Telecorder  
Telefunken  
Thomas  
Thomson  
Tivo  
0041  
0000  
0060, 0041  
0618, 0636, 0739, 1503  
0240  
0845, 1145, 0000,1503,  
1008, 1972, 0045, 0240,  
0043, 0209, 0041  
0037, 0240  
1972  
Tocom  
Toshiba  
Samtron  
Sanky  
Sansui  
0048, 0039  
1479, 0000,0067, 0240,  
0209, 0041, 0072  
0159, 0000, 0047, 0240,  
0104  
Totevision  
Touch  
Trix  
Sanyo  
0037  
0045  
Ultra  
Scott  
Sears  
0184, 0045, 0121, 0043  
1237, 0000, 0035, 0060,  
0037, 0048, 0039, 0047,  
0033, 0162, 0045, 0042,  
0067, 0104, 0043, 0209,  
0041, 0072  
0807, 0000,0048, 0047,  
0032  
0000,0039, 0240, 0072  
0240  
Unitech  
Vector  
Vector Research  
Vextra  
Victor  
Video Concepts  
Videomagic  
Videosonic  
Viewsonic  
Villain  
0240  
0045  
0184  
0072  
0067, 0041  
0045  
0037  
0000, 0240, 0072  
1972  
0000  
Sharp  
Shintom  
Shogun  
Siemens  
0037, 0104  
Voodoo  
1972  
Signature  
Signature 2000  
0035  
0000, 0035,  
Wards  
0000, 0035, 0060, 0037,  
0048, 0039, 0047, 0081,  
0033, 0045, 0042, 0240,  
0043, 0041, 0072  
000, 0209, 0072  
0209  
0000, 0035, 0072  
0000, 0035, 0240, 0072  
0041  
0060, 0037, 0048  
0037, 0240, 0072  
0614, 0616  
1232, 0000, 0636,1972,  
0035, 0047, 0032, 0033,  
0067  
Singer  
Sonic Blue  
Sony  
White Westinghouse  
World  
XR-1000  
XR1000  
Yamaha  
ZT Group  
Zenith  
Soundmaster  
Stack 9  
Sylvania  
0000  
1972  
1972  
1781, 0000, 0035, 0081,  
0043  
1479, 0000, 0037, 0039,  
0033, 0209, 0041  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
DVD Players  
Manufacturer  
Code  
Manufacturer  
Code  
0503, 0539  
1016  
0641  
Firstline  
Fisher  
Funai  
GE  
GPX  
0651  
0670  
0675, 1268, 1334  
0522, 0717, 0815  
0699  
3D LAB  
Advent  
Aiwa  
Akai  
Alba  
0899, 0770, 0705  
0672, 0717  
Gateway  
General Electric  
Go Video  
1158, 1073  
0717  
Alco  
Allegro  
Apex  
0790  
0869  
0573,1075, 1044,0744,  
0717, 0869, 0741,0783,  
1158, 1099, 1304,1730,  
0833, 0715  
1071  
0801, 0869, 0741  
0790  
0490, 0651  
0717  
0539, 0705  
0582, 0702  
0573, 0664, 1247  
0672  
0533, 0672, 1056,1061,  
0830, 0794, 0796,0797,  
1100, 1020, 0717, 0755  
0672, 1056, 1061, 0830,  
0794, 0796, 0797, 1100,  
1004, 1020, 0717, 0755  
1168  
0790, 0717, 1071, 1121,  
1122  
1071  
0717  
0571  
0695, 0699  
0651  
Apex Digital  
Go Vision  
GoldStar  
Goodmans  
Gradiente  
Greenhill  
Grundig  
Harman/Kardon  
Hitachi  
Hiteker  
IRT  
Aspire Digital  
Audiovox  
Axion  
Blaupunkt  
Blue Parade  
Blue Sky  
Brandt  
0783  
Initial  
Integra  
JBL  
JMB  
JVC  
Jensen  
KLH  
KLH Digital  
Kawasaki  
Kenwood  
Kloss  
0717  
0571, 0627  
0702  
Broksonic  
California Audio Labs  
Celestial  
Centrex  
CineVision  
Cinea  
Citizen  
Clairtone  
Coby  
Craig  
Creative  
Curtis Mathes  
CyberHome  
0695, 0868  
0490  
1020  
0672, 1004  
0869, 0876, 0833  
0831  
1003, 1277  
0571  
0778, 1107  
0831  
0503, 0539  
1087  
0816, 1023,1117,1024,  
1129, 0874  
0705  
0695  
0623, 1164, 0558, 0867  
1016  
1020, 0790, 0717, 1149  
0717  
0790  
0490, 0534  
0533  
1061, 0651  
0801, 0591, 0869, 0741  
0798, 0627  
1533  
Koss  
LG  
Lasonic  
Lecson  
Lenoxx  
Lite-On  
LiteOn  
Cytron  
DVD2000  
Daewoo  
1127  
0521  
1058, 1158  
1058, 1158, 1416, 1440  
0511, 0741  
0783  
0869, 1172,0784,0770,  
1169, 0705, 0833  
0770  
Loewe  
Logix  
Dansai  
Decca  
0770  
Magnasonic  
Magnavox  
0675, 0651  
0503, 0539,0675, 0646,  
0821  
Denon  
Denver  
DiViDo  
0490, 0634  
0778  
0705  
Marantz  
McIntosh  
Medion  
Memorex  
Microsoft  
Minato  
Mintek  
Mitsubishi  
NAD  
0503, 0539, 0675  
1533  
0651  
0695, 1270, 0831  
0522  
0752  
0717, 0839  
0521, 1521  
0591, 0741  
Digitrex  
Disney  
Dual  
Durabrand  
Electrohome  
Emerson  
Enterprise  
Entivo  
0672  
0675, 1270  
0675  
1127  
1003  
0675, 0821, 1268,0591  
0591  
0503, 0539  
0770  
Enzer  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming Your Remote Control  
Manufacturer  
Code  
0695  
Manufacturer  
Code  
0785, 0869  
NEC  
Naiko  
Sansui  
Sanyo  
0770  
0695, 0675, 0670, 1334,  
Nesa  
0717  
0873  
NexxTech  
Norcent  
Onkyo  
Optimus  
Orion  
Oritron  
Palsonic  
Panasonic  
1402  
1003, 1107  
0792, 0503, 0627  
0571  
0695  
0651  
0672  
Schneider  
Schwaiger  
Sensory Science  
Sharp  
Sharper Image  
Sherwood  
Shinsonic  
0783  
0752  
1158  
0675, 1256, 0752, 0630  
1117  
0770, 1043  
0533, 0839  
0503, 0490, 1762,0703,  
Slim Art  
0784  
1362, 1462, 1490, 0571  
Sonic Blue  
0573, 0869 ,0783, 1099,  
Philips  
0503, 0539, 0675,1267,  
0715  
0646, 0854, 1354, 1260  
Sony  
0533, 1033, 1431, 0864,  
Phonotrend  
PianoDisc  
Pioneer  
Polaroid  
Polk Audio  
Portland  
Prima  
0699  
1024  
0571, 0525, 0631  
1061, 1020  
0539  
0770  
1016  
1533  
1122  
0821  
Sova  
Superscan  
Sylvania  
Symphonic  
Tatung  
0675, 0821, 1268, 0630  
0675, 0821, 1268, 1334  
0770  
Teac  
0809, 0571, 0790, 0717  
ProVision  
Proceed  
Proscan  
Prosonic  
Qwestar  
RCA  
0778  
0672  
0522  
0699  
Technics  
Technika  
Tevion  
Theta Digital  
Thomson  
Toshiba  
0490, 0703  
0770  
0651  
0571  
0511, 0522  
0503, 0695, 1045, 1154,  
0651  
0522, 0571,0822, 1132,  
1022, 0790, 0717  
0573, 0539  
RadioShack  
Radionette  
Realistic  
Reoc  
Revoy  
Rio  
Rotel  
Rowa  
SVA  
Saba  
0571  
0741  
0571  
0752  
0699  
0869  
0623  
1004, 0823  
0717  
US Logic  
USLogic  
Unimax  
Universum  
Urban Concepts  
Venturer  
Wesder  
Xbox  
0839  
0839  
0770  
0591  
0503, 0539  
0790  
0699  
0522  
Yamaha  
Zenith  
Zeus  
0490, 0539, 0545  
0503, 0591, 0869, 0741  
0784  
0651  
0752  
Sampo  
Samsung  
0490, 0573,0820, 1075,  
0899, 1044, 0744  
iLo  
1348  
CARE  
• Keep the remote dry. If it gets wet, wipe it dry immediately.  
• Use and store the unit only in normal temperature environments.  
• Handle the remote gently and carefully. Don’t drop it.  
• Wipe the remote with a damp cloth to keep it looking like new.  
20070411  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Paxar Network Card Monarch 6063TM User Manual
Philips Car Stereo System CEM250 User Manual
Philips Computer Drive FM16FD00B User Manual
Philips CRT Television 14PT3685 User Manual
Philips Digital Photo Frame SPY3010 User Manual
Philips Work Light Fluorescent Lamp User Manual
Pioneer DVD Player DV 588A S User Manual
Pioneer Home Theater System GM 5500T User Manual
Planet Technology IP Phone SW242 ALR User Manual
Princeton Digital USA Flat Panel Television TLA 04641C User Manual