7” Under-the-Counter LCD / DVD
FDM-0700A
Operating Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USE-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OF MOISTURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the DVD player in the slot marked “DC 12V
IN”. Plug the two-prong end of the power cord to an AC100-240V outlet. If you have
difficulty inserting the plug, turn it over and reinsert it, if the unit will not be used for a
long time, disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the
operating instructions unless you are qualified to do so.
Refer to service manual for servicing instructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
-3-
Important Safety Instructions
Note:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
4. Follow all instructions.
5. Do not use near water.
6. Clean only with dry cloth.
3. CAUTION: Do not open the top cover. There are no user service-
able parts inside the unit. Leave all servicing to qualified service
personnel.
7. Do not block any ventilation openings. Maintain well ventilated conditions around
the product. Do not put product on bed, sofa or anything that blocks ventilation.
Install in accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Copyright Protection
Unauthorized copying, broadcasting, public performance, and lending of disks are
prohibited. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
-4-
FCC Notice
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
Download from Www.Somanuals.com. All Manuals Search And Download.
-5-
Characteristic Features
This product incorporates
a
DVD
Advanced Playing Function
Compatibility
Plays: DVD, CD, CD-R, CD-RW, JPEG
and MP3 discs.
player, LCD display, TV receiver and
radio function in one system. It is
designed for convenient use in the
kitchen. Please refer to page 32 for the
installation instructions.
On-Screen Display
Displays your choice of English, Spanish
or French.
Multiple Mode
Fast Search Function
DVD
Multi-speed, fast forward, fast reverse,
slow play and repeat playback.
Zoom Function
TV
Radio
External Audio
mode
&
Video Input
Allows the viewer to enlarge in the
picture.
Search By Time
High Quality Property
Video Screen
Search for a certain time on a disc.
Last Memory Playback
Continues playback from a stopped point
as long as power is applied to the DVD
Player.
Supports normal screen (4:3) and wide
screen (16:9) aspect ratios.
AV Input
External Audio、Video input can be
connected to most external AV sources.
LCD (Liquid Crystal Display) screen
Color video screen designed with LCD
technology clearly shows video data.
Amplifier Function
TV Functions
Clear TV signal reception.
Search for TV channels automatically.
Automatically memorize the channels.
Built-in 2x2.5w stereo amplifier with left
and right speakers.
Radio Functions
Clear AM/FM signal reception.
Search for radio stations
automatically.
Switching Power Adapter
Automatically adapts to the voltage
required.
Special Functions
Store radio stations easily.
Search for radio stations in high or
low frequency range.
Supports Multi-language and Parental-
lock features.
Download from Www.Somanuals.com. All Manuals Search And Download.
-6-
Disc Information
Disc Formats Supported By This Player
PLAYBACK TIME/
PLAYABLE SIDES
DISC LOGO
DIAMETER
133 min (SS-SL)
242 min (SS-DL)
266 min (SS-SL)
484 min (SS-DL)
41 min (SS-SL)
12cm
DVD
75 min (SS-DL)
8cm
82 min (DS-SL)
150 min (DS-DL)
12cm
74 min
CD
8cm
20 min
MP3
12cm
600 min
The disc maker specifies the operation of some DVD discs. Please refer to the
instruction manual with the disc.
Care of Discs
Cleaning of Discs
If a disc has fingerprints or dust on it,
lightly wipe the disc with soft cloth from
the center of the disc outward.
Do not touch the playing surface of the
disc.
Do not stick paper or labels on the disc.
Storage of Discs
Do not expose discs to direct sunlight or
excessive temperatures.
Never use record cleaning sprays, or
any other solvents to clean your discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
Front Panel Drawing
1. POWER button
Press twice to go to the previous
track/chapter.
Press to enter or exit the STANDBY
mode.
7. SOURCE button
2. PLAY/PAUSE button
Press to start or pause playback under
DVD mode.
Press to shift among DVD, TV,AV,FM
and AM mode.
8. EJECT button
3. Disc Tray
Press to open or close the disc tray.
9. Remote Sensor
Used to load disc.
4. STOP button
Receives remote control signal for
operation.
Press to stop playback under DVD mode.
5. ꢀ
10. Display panel
Press to go to the next track under DVD
mode.
Displays the time, status, radio
frequency and radio station number.
When adjusting volume, the VOL and
volume level will be displayed on the
display panel for several seconds.
6. ꢁ
Under DVD mode, press once to go to
beginning of the current track/chapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 8 -
Front Panel
11. SEEK –/+ button
16. ▲
Under radio mode, press once to fine
tune frequency backward or forward.
Press for about 1.5 seconds to search
radio stations backward or forward
automatically.
Press to select items in the setup menu.
Press to select channels or radio
stations forward under TV or radio mode.
Press to adjust the value upward when
setting the time on the display panel.
17. OK button
Under DVD mode, press to activate fast
backward or forward playback.
12. MUTE button
Press to confirm selections in setup
menu.
Press to turn the speaker output on or
off. The corresponding information will
be displayed on the display panel.
13. SET button
18. ►
Press to select items in the setup menu.
Press to increase the volume. Press to
increase the value in the picture setup
menu.
Press to enter and exit from the timer
setup menu. Press to memorize the
station under AM/FM status.
19. ▼
Press to select items in the setup menu.
Press to select the channels or radio
stations backward under TV or radio
mode.
14. TIME button
Press it once to display the time on the
display panel. In standby status, the time
is still displayed on the panel.
Press it again to set the time on the
display panel. Use the ꢂꢃbuttons to
select the editing position of hour or
minute, and then use the ꢄꢅ buttons to
adjust the value of the hour or minute
upward and downward.
Press to adjust the value downward
when setting the time on the display
panel.
20. TV/LCD SETUP button
Press to enter the TV/LCD setup menu.
21. LCD screen
Presents a high resolution picture.
15. ◄
Press to select items in the setup menu.
Or press to decrease the volume. Or
press to decrease the value in the
picture setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 9 -
Rear Panel and display panel
Rear Panel Drawing
1. ANT INPUT jack
4. Left/Right AUDIO input jack
Connected to external antenna to
receive the TV program in TV mode.
2. FM 75Ωcoaxial antenna jack
3. AM antenna jack
Connection for audio input.
5. VIDEO input jack
Connection for video input.
6. Direct current 12V input jack
Display Panel Drawing
1. FM radio status indicator
2. AM radio status indicator
AM time indicator
5. Minute or character indicators
6. Character indicators
7. FM frequency unit of MHz indicator
3. PM time indicator
4. Hour or character indicators
8. AM frequency unit of KHz indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
- 10 -
Remote Control
Preparation
Using Of Remote Control
Refer to the drawing and remove the
empty battery receptacle.
Point the remote control towards the
main unit when operating. The r/c works
best at a distance less than 7m and at
an angle of up to 60°to the front of the
unit. No obstacles may stand in the way
between r/c and infrared sensor.
Insert the battery into the receptacle.
Make sure the polarity matches the
marks inside the component.
The batteries normally last for about six
months. This depends on how often and
for what operations the remote control is
used.
Insert the receptacle into the remote
control.
If the remote control unit fails to work
even when it is operated near the player,
replace the batteries.
If the r/c is not used for a long period of
time, please remove the batteries from
the compartment, to prevent damage by
leakage.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 11 -
Remote Control
Remote Control Drawing
Download from Www.Somanuals.com. All Manuals Search And Download.
- 12 -
Remote Control
1. POWER button
11. SEEK – button
Press to access to or exit the STANDBY
mode.
Under radio mode, press once to fine
tune frequency backward. Press for
about 1.5 seconds to search radio
stations backward automatically.
Under DVD mode, press to activate fast
backward playback.
2. SUBTITLE button
Press to select a subtitle language or to
turn subtitles off when a DVD with multi-
subtitles is playing.
12. SEEK + button
3. DVD button
Press to enter DVD mode.
Under radio mode, press once to fine
tune frequency forward. Press for about
1.5 seconds to search radio stations
forward automatically.
4. TV button
Press to enter TV mode.
Under DVD mode, press to activate fast
forward playback.
5. AV button
Press to shift to external AV input mode.
13. PLAY button
Press to start playback under DVD mode.
6. FM/AM button
Press to shift to FM/AM signal input
mode.
14. STOP button
Press to stop playback under DVD mode.
7. TV/LCD SETUP button
Press to enter the TV/LCD SETUP menu.
15. TITLE button
Press to display titles if present on the
disc under DVD mode.
8. OK button
Press to confirm selections.
16. MENU button
Press to access the disc menu under
DVD mode.
9. ꢂꢃꢄꢅ
Press to select menu items or settings.
Press ꢂꢃ buttons to adjust volume. Or
press to adjust value in the picture setup
menu.
Press ꢄꢅ buttons to select channels or
radio stations forward and backward in
TV or radio mode. Or press to adjust the
value of time when setting time on the
display panel.
17. REPEAT button
Press to repeat a title, chapter, title or
the entire disc.
18. A-B Repeat button
Used to play a section of the DVD from
point “A” to point “B”. Press once to
select the starting point (A) press again
to select the end point (B). Press a third
time to stop the A-B Repeat.
10. SET button
Press to enter and exit from the timer
setup menu. Or Press to memorize the
station under AM/FM status.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 13 -
Remote Control
19. EJECT button
28. TIME button
Press to open or close the disc tray.
Press it once to display the time on the
display panel. In standby status, the time
is still displayed on the display panel.
Press it twice to set the time on the
display panel. Use the ꢂꢃbuttons to
select the editing position of hour or
minute, use the ꢄꢅ buttons to adjust
the value of the hour or minute upward
and downward.
20. AUDIO button
Press to access various audio languages,
when the DVD disc contains multiple
audio languages.
21. 0-9 number buttons
Select numbers by pressing these
buttons.
29. ꢀ NEXT button
Press to go to the next track under DVD
mode.
22. GOTO button
Press to select the desired disc starting
Time, Track or Title.
30. ꢁ PREV button
23. +10 button
Under DVD mode, press to go to
beginning of current track or chapter.
Press twice repeatedly to go to
beginning of a previous track or chapter.
Select numbers greater than 9 by
pressing the (+10) button first, and then
additional number buttons as needed.
24. 16:9/4:3 button
31. MUTE button
Press to shift the aspect radio between
16:9 and 4:3.
Press to turn on/off the speaker output.
The corresponding information will be
displayed on the display panel.
25. DVD SETUP button
Press to access the DVD setup menu
under DVD mode.
32. PAUSE button
Press to pause playback in DVD mode.
26. INFO button
33. ZOOM button
Press to display detailed playback
information.
Press repeatedly to display additional
information or to turn the information
display OFF.
Press to enter and cycle through zoom
functions, use the direction buttons to
pan around the screen.
34. VOL+/-
Press to increase or decrease the
speaker volume level.
27. LCD ON/OFF button
Press to turn the LCD screen display on
or off under TV, AV and DVD mode.
35. SLOW button
Press to activate slow forward playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 14 -
System Connections
◆ Do not connect the power cord until all other connections have been made.
◆ Each time you restart the unit, it remembers the last function used.
Connecting To External AV Signal Source
Connections should be made as follows:
Connecting To TV Signal Input Source
Download from Www.Somanuals.com. All Manuals Search And Download.
- 15 -
System Connections
Connecting To Antenna
Connect the supplied AM/FM antennas to listen to the radio.
◆ In order to improve the signal, move AM loop antenna away from system and other
equipment.
◆ Extend FM antenna fully.
◆ Keep the FM antenna as horizontal as possible after connection.
◆ When connecting the supplied AM loop antenna, connect two black cords to AM and
ground jacks as shown below.
◆ If the FM reception is poor, use a 75Ωcoaxial cable (not supplied) to connect
system to an outdoor FM antenna as above.
◆ If you connect the system with outdoor FM antenna, you should earth the system in
order to avoid lightning strike.
◆ Do not connect the earth wire to gas pipe to prevent gas explosion.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 16 -
System Connections
Connecting To the Power Adapter
This unit is powered via the switching power adapter (supplied). See the below figure for
details:
1. Connect the AC adapter to jack marked with “DC 12V IN” on the rear panel of the unit.
2. Plug the two-prong end of the power cord to the grounded electrical socket.
3. When not using the unit, turn off the power of the unit first, and then unplug the power
supply to prevent malfunctions.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 17 -
Radio Function
Radio Function Operation
Press the AM or FM button on the remote control or front panel to enter AM or FM radio
mode. Then press the SEEK+/- button for about 1.5 seconds on the remote control or
front panel to start searching forward/backward from the current frequency. Press the
SEEK+/- button again to stop searching. Radio frequency will be displayed on the
display panel. The frequency range of FM is from 87.5MHz to 107.9MHz, frequency
range of AM is from 520kHz to 1710kHz.
Fine Tuning
Press the SEEK+/- button on the remote control or front panel once to fine tune the
frequency forward/backward under radio mode.
Semi-memorizing radio stations
If you like a radio station and want to store it for later listening, press the SET button to
memorize it. “SAVE X X” will be displayed on the display panel, “X X” represents the
default station number.
There are two methods to organize the memorized stations:
◆ Use the ꢄꢅ buttons to adjust the channel number for your preference, and then
press the SET button again, the station will be memorized with the coded station
number.
◆ Press the SET button again, the station will be automatically memorized with the
default station number in sequence.
You can store radio stations from 0 to 19, total 20FM or 20AM radio stations. If no
buttons are pressed within 3 seconds of pressing the SET button first time, the
frequency will appear on the display panel again, and the station will not be stored.
Accessing memorized radio stations
◆ Press the number buttons on the remote control to access a radio station by its
memory location code.
◆ Press the ꢄꢅbuttons on the remote control or front panel to select the radio
stations forward and backward.
When selecting the stations, the “CH XX” will appear on the display panel, where the
“XX” is the channel number of the stored radio station. After a few seconds, the “CH XX”
disappears and the radio frequency will be displayed once again.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 18 -
TV Function
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the ꢄꢅ buttons on the remote control, or use the number buttons directly, to
select the desired channel.
Some preferences can be preset:
Picture Parameter Setup
Press the TV/LCD SETUP button once on the remote control to enter PICTURE setup
menu, and screen display as shown:
PICTURE
Brightness
Contrast
Color
11
13
14
Language
Reset
English
EXIT ◄
►TV SETUP
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the ►, ◄ buttons to adjust, you can adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select English,
French or Spanish.
To restore a setting to the original value, use the ▼、▲ buttons to select Reset, then
press the OK button to confirm the change.
Press the ◄ button on the remote control to exit from the setup menu.
Press the ► button on the remote control to enter TV Setup menu.
TV System Setup
When the ► button is pressed, the TV system setup menu will appear:
TV SETUP
Signal
CATV
Channel
Skip
002
ON
Fine Tuning
Auto Memory
◄ PICTURE
EXIT
►
Download from Www.Somanuals.com. All Manuals Search And Download.
- 19 -
TV Function
Use the ▼、▲ buttons to select the item you want to set.
Use the ►, ◄ buttons to select the item and enter it.
Press the ► button on the remote control to exit from the setup menu.
Press the ◄ button on the remote control to return to the picture setup menu.
Signal
Use the ► direction button to select CATV TV signal input mode.
Use the ◄ direction button to select AIR TV signal input mode.
Channel
Use the ►, ◄ buttons to change the channel. In CATV input mode, you can select
channels from 2 to 125; in AIR input mode, you can select channels from 2 to 69.
Skip
When the ► button is pressed to turn the function ON, it will skip the current channel
when using ▼、▲ to select channels.
When the ◄ button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Fine Tuning
Use the ▼、▲ buttons to select Fine Tuning, and then press the ►, ◄ buttons to tune
forward or backward from the current channel
Auto Memory
Use the ▼、▲ buttons to select Auto Memory, press the OK button to enter auto
memory mode:
SEARCHING
CH:009
EXIT:◄
----------------------------
Download from Www.Somanuals.com. All Manuals Search And Download.
- 20 -
TV Function
The auto memory will take a few minutes. The unit will search channels from the lowest
channel to the highest channel in the standard channel list. When tuning operations are
complete the unit will exit and store the channels by sequence in the memory.
During tuning, press the ◄ button to exit the auto memory.
Use the ▼、▲ direction buttons to select the desired channel from those in memory.
Timer Setup
Press the SET button on the remote control to enter Timer setup menu, the screen will
display as below:
TIMER SET
Timer
OFF
_ _: _ _ am
_ _: _ _ am
CATV
Power on
Power off
Signal
Channel
002
Exit: SET
Use the ▼、▲ buttons to select the item you want to set.
Use the ►, ◄ buttons to enter the item and to select.
Press the SET button again on the remote control to exit from the setup menu.
Timer
Use the ►, ◄ direction buttons to select ON or OFF. This function allows you to set the
start time and end time of the desired signal source. No matter what mode the unit is in,
this function will automatically start the playback of the desired signal source.
Select ON to activate the function; select OFF to disable the function.
Power on
To set the playback start time of the signal source, use number buttons to input the
desired start time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift
between am and pm.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 21 -
TV Function
Power off
To set the playback end time of the signal source, use number buttons to input the
desired time in sequence of hour, minute. Press the ►, ◄ direction buttons to shift
between am and pm. When the playback of the signal source is over, the player will
enter standby mode.
Signal
Use the ►, ◄ direction buttons to select CATV, AIR, FM or AM.
Channel
Use number buttons to input the desired TV channels. In CATV signal input mode, there
are 124 channels to choose from (2-125); in AIR signal input mode, there are 68
channels to choose from (2-69).
Press the ꢄꢅ buttons on the remote control to select the desired channel, or use the
number buttons to input and then press the OK button to confirm.
Note:
The function is active as long as the unit is continuously supplied with power. The unit
will automatically play the selected input signal at the set start time and enter standby
mode at the set end time each day.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 22 -
AV Function
AV Function
The player has an additional AV input so it can function as a monitor for a DVD player,
video cassette player, satellite receiver, video game, etc. When an AV source is
connected, press the AV button on the remote control to enter external input AV mode.
Picture Parameter Setup
Press the LCD SETUP button once on remote control to enter PICTURE setup menu,
and screen will display as shown:
PICTURE
Brightness
Contrast
Color
11
13
14
Language
Reset
English
Exit
◄
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the ►, ◄ buttons to adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select English,
French or Spanish.
Select Reset to return to the factory default settings.
Press the ◄ button on the remote control to exit from the setup menu.
Note:
Under AV mode, if there is no signal, the LCD screen will be turned off automatically.
When connected to an AV signal source, make sure the type of the selected AV signal
source is NTSC.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 23 -
Play Operation
Preparation
1. Install the unit in the kitchen; refer to page 32 for details.
2. After connecting the unit to the AC power, turn on the unit’s power by pressing the
POWER button on the front panel or the remote control.
3. Press the DVD button on the remote control or the SOURCE button to shift to DVD
mode.
4. Press the EJECT button on the front panel or the remote control to open the disc
tray.
5. Load the disc with the label facing up.
6. Press the EJECT button again to close the disc tray. The player will automatically
search for the disc and start playback.
DVD Playback
Menu
Normally there is a selecting menu for DVD discs. You can press the MENU button to
enter the menu, and use the direction buttons to highlight an item you would like to
select. Press the OK button to select it.
Title & Chapter
Normally there are several titles in a DVD disc, and several chapters (sections) in a title.
You can select any title or chapter quickly by entering the relevant number.
Audio
DVD discs can contain up to 8 audio bit streams. For Example: English, Spanish,
French etc.
To select the audio bit stream you prefer press the AUDIO button on the remote control
during playback. The DVD player will play the next audio bit stream every time you
press the AUDIO button in succession.
Note: This function is only available for discs that have several audio bit streams
recorded onto it.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 24 -
Play Operation
Subtitle
A DVD disc can be recorded with up to 32 subtitles.
Press the SUBTITLE button on the remote control during playback to select the one you
prefer.
NOTE: This function is only available on DVD discs that are recorded with multi-
subtitles.
CD Playback
The player will play all tracks on a CD disc by default. You can use the ꢁ and ꢀ
(PREV/NEXT skip) buttons, or number buttons to select a track.
MP3 playback
MP3 is an Audio compression format, which compresses the audio signal at the rate of
12:1. When using the MP3 format, one disc can record more than 600 minutes of music,
with sound quality that is similar to that of CD discs.
There are many different methods for storing MP3 songs. Usually, one MP3 disc
includes many folders (directories) and every folder includes several files (songs).
Load a MP3 formatted disc into the DVD Player and a menu will be displayed on the
screen. In stop status, press the up/down direction button to select the directory as you
desire and press the OK or PLAY button for confirmation, use the up/down direction
buttons again to select the desired track. In playback status, use the ꢀ or ꢁ button to
select the next or previous track.
•
•
During MP3 playback, press the previous or next button to turn the page.
There is no search by time or slow playback function for MP3 discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 25 -
Play Operation
JPEG Playback
JPEG is a common picture format that requires small amounts of storage per image and
has low loss in resolution. Hundreds of pictures can be stored on a disc in this format. In
order to view JPEG photo albums, you can ask your film development company to
make a ”PICTURE CD” when they develop your film.
Normal Playback
Load a JPEG disc in. Use the OK button and Left/Right direction button to select a
submenu with picture, and then use the Up/Down direction button to select the contents.
•
Many discs have other contents besides pictures.
Picture Rotation
This can be used only when the picture is normally displayed. Once another picture is
selected, rotation will be cancelled automatically.
During playback, use the direction buttons to rotate the picture.
Zoom and Move
The ZOOM button is used to turn on/off the zoom and move functions.
When this function is turned on, use the REV/FWD SCAN button to control zoom
proportion and the TV screen will display the relevant proportion.
When this function is turned off, the picture will resume normal size. Press the MENU
button to return to menu page.
•
Some JPEG discs may not support rotation or zooming functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 26 -
Playback Functions
Stop
During playback, press the STOP button once on the remote control to stop playback of
a disc. Press the PLAY button and the DVD Player will resume playback of the disc
from the point where it was stopped.
Pause
Press the PAUSE button once on remote control or front panel to pause playback.
Press the PLAY button to resume normal playback.
Resume Playback
Press the STOP button at the point if you wish to stop the playback of a disc. The DVD
Player will memorize the location where playback of the disc was stopped.
Press the PLAY button to resume normal playback. The DVD Player will resume the
playback of the disc from the location where it was stopped. This function will not
operate if the disc is removed from the DVD Player.
Press the STOP button twice (2). Playback of the disc will stop. When the PLAY button
is pressed again, playback of the disc will start from the beginning of disc.
Zoom
Press the ZOOM button on the remote control to cycle through the different zoom
settings.
Fast Playback
Press the ꢆ or ꢇ button on the remote control to activate fast forward or rewind
playback.
Slow Playback
Press the SLOW button to activate slow forward playback.
◆ There is no slow playback for MP3, CD discs.
Search By Time
During DVD disc playback, press the GOTO button on the remote control once, there
will be a menu displayed on the screen. You can set or select items for your preference.
Use the ꢄꢅ direction buttons to select items, press the OK button to enter and use the
ꢄꢅ direction buttons to select the desired item. Press the ꢂdirection button to return.
When select the Title or Chapter, use number buttons to input desired title or chapter.
◆
Some DVD discs do not support the search function.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 27 -
Playback Functions
Previous and Next
Press the PREV ꢁ button once to return to the currently playing Chapter or Track.
Press the PREV button twice repeatedly and playback will start from the previous
Chapter or Track.
Press the NEXT ꢀ button on the remote control and playback of the disc will start from
the next Chapter or Track.
Repeat
To repeat a Title, Chapter or Track press the REP button on the remote control.
Continually pressing the REP button will display a menu as follows: Repeat Chapter,
Title, All.
You can temporarily select a section of a DVD that you would like to play repeatedly.
You do this by marking the start and the end of the section using the A/B button. During
playback press the A-B button on the remote control at the beginning of the segment
(point A) you wish to play repeatedly. Press the A-B button again to mark the end of the
segment (point B).
The DVD player will automatically return to point A and repeat playback of the selected
segment (A-B). To resume normal playback, press the A-B button again.
Screen Mode
Press the 16:9/4:3 button on the remote control to switch the screen aspect ratio
between 16:9 and 4:3.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 28 -
System Setup
DVD Setup
You can customize the set up menu to your own preference.
Press the “DVD SETUP” button on the remote control to display the setup menu. The
menu will include “General Setup”, “Speaker Setup”, “Dolby Digital Setup”, “Video
Setup”, and “Preference Setup”. Press the direction button (ꢂꢄꢅꢃ) on the remote
control to select a category. All the items in the category will appear on the screen.
Press the “OK” button to enter the category.
Category
When you enter a category all the items under this category will appear, the highlighted
category is the current set up.
Press the right direction button (ꢃ) on the remote control to select another category
(new selection will be highlighted). Press the “OK” button for confirmation.
Press the left direction button (ꢂ) to enter the other setup menu(s).
General Setup
TV Display
Select Normal/PS or Normal/LB when a 4:3 TV is connected.
Select Wide when a 16:9 when using the screen on the unit or when a wide screen TV
is connected to the video output.
OSD Lang
There are three different OSD languages for selection. You can select English, French
or Spanish.
Captions
You can choose captions ON or OFF during playback.
Screen Saver
When activated, under stop mode, the unit will go into screen saver mode if the same
image remains on the screen for several minutes, and then enter standby mode
automatically.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 29 -
System Setup
Speaker Setup
Downmix
Select “LT/RT” in DOWNMIX, the player will output the audio signal IN MIXED NONO.
Select “Stereo”, then the player will output a stereo signal.
Dolby Digital Setup
Dual Mono
The function is used to select from stereo, left only, right only, and mixed mono.
Dynamic
Use this item to adjust linear dynamic compression rate to get different signal
compression effects.
Video Setup
Sharpness
Use this setting to adjust the sharpness level
Brightness
Use this setting to adjust the brightness level.
Contrast
Use this setting to adjust the contrast level.
Preference Page
Audio, Subtitle, Disc Menu
This setting allows you to hear or read the subtitles of a DVD in your choice of English,
Spanish and French etc. if the disc contains multiple languages.
Parental
DVD discs equipped with the child lock function are rated according to their contents
and settings vary from disc to disc. Depending on the disc, you can lock out selected
scenes or playback of the disc altogether. Access parental control by pressing the ꢄꢅ
(direction buttons) on the remote control and then press the OK button.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 30 -
System Setup
Password
Parental control features are password protected. The original setting is unlocked. This
setting allows you to use number buttons to input any password.
Note: The Default Password is 1369. This password is always effective even after you
have selected your own password and changed it. To avoid the possibility of others
using the default password to set the parental level and change the password, you can
record this default password in another area and delete it from this manual. Some discs
can be limited depending on the age of users while some discs cannot.
Default Reset
Use this function to reset all the settings.
Note: For preference setting, the unit must be in the stop mode.
LCD Setup
Under DVD mode, press the LCD SETUP button on the remote control or front panel,
there will be menu displayed on the screen.
PICTURE
Brightness
Contrast
Color
11
13
14
Language
Reset
English
Exit
◄
Use the ▼、▲ buttons to select the item you want to set (Brightness, Contrast, Color).
Use the ►, ◄ buttons to adjust, you can adjust the items between 0 and 20.
Use the ▼, ▲ buttons to select the Language, press the ►, ◄ buttons to select English,
French or Spanish.
Select Reset to resume the original status.
Press the ◄ button on the remote control to exit from the setup menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 31 -
Installing the Unit In Kitchen
Installing the unit under a cabinet
The player unit may be installed in the kitchen with or without the spacer. The
suggested mounting position of the unit is under a wall cabinet. See drawings below:
NOTE: The dimensions of the player: 355mm x 75mm x 285 mm (W/H/D)
There should be at least 35mm distance between the unit and the wall.
Installing steps
1. Mark the position of the 4 holes by using the supplied template. Drill four 6.5 mm
diameter holes. As shown below:
Download from Www.Somanuals.com. All Manuals Search And Download.
- 32 -
Installing the Unit in Kitchen
2. If the cabinet door overhangs the shelf and obstructs the unit, adjust the unit or the
shelf height for clearance.
3. Install the unit with the supplied mounting screws.
4. There should be at least 35mm distance between the unit and the wall.
Quick hints
◆Since the unit is rather heavy, be careful while doing the fixing work.
◆To reduce risk of fire, do not place any heating or cooking appliance beneath the unit,
especially while the LCD screen is open on viewing.
◆Mount the unit so that its AC power cord can be plugged directly to a wall outlet.
Do not use a converter or extension cord.
◆Be sure that the AC power cord has no slack when the player is working, because
the cord acts as an FM wire antenna. If the AC power cord has some slack, wind it
up to the cord hook until the cord has no slack.
◆The unit has a built-in ferrite bar antenna for AM radio reception. Check the
condition of AM reception before fixing in position.
◆Install the unit as far as possible from a source of noise, for example, refrigerator,
microwave oven, fluorescent lamp, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 33 -
Troubleshooting
SYMPTOM
CHECK ITEM
Make sure a disc is loaded.
Make sure the disc is loaded with label side up.
Disc should be clean, not dirty or warped.
Player’s region code should be the same as the region code
of the DVD disc.
The player cannot
play.
Make sure water condensation has not occurred. If it has,
remove the disc and keep the player power on until the
moisture evaporates.
Make sure system connection is correct.
Make sure the player is not under muting mode.
Press the MUTE button to turn on the speaker.
Make sure the volume is adjusted to the lowest.
Adjust the volume upward.
There is no sound.
Is your disc dirty or warped? Clean or replace it.
There is no picture
or picture is
unsteady. Position
of the picture is
incorrect.
Make sure the video type of the AV signal source TV is
NTSC.
Make sure system connection is correct.
Is your disc dirty or warped? Clean or replace it.
Cannot continue to
play and plays a
section repeatedly.
Make sure the player is not in A-B repeat status.
Press A-B button to cancel A-B repeat status.
Is your disc dirty or warped? Clean or replace it.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure batteries are inserted correctly (check polarity).
Replace weak batteries.
The remote control
does not work.
Other Notes: Static or other external interfere may cause the player to behave
abnormally. If this occurs, unplug the power-supply cord from the outlet and plug it in
again to reset the player. If the problems persist, then please disconnect the power and
consult a qualified technician.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 34 -
Specifications
LCD screen size
7 inches
Laser Wavelength
Video System
Wavelength: 780/650nm
NTSC
Frequency Response
Audio Signal-to-Noise
Audio distortion + noise
Channel Separation
Dynamic Range
20Hz~20kHz ±2.5dB
≥85 dB
≤-70dB (1KHz)
≥70dB (1KHz)
≥80dB (1KHz)
PLL
System
AM
FM
520~1710kHz
Radio
Frequency
Range
87.5~107.9MHz
Power
AC100V~ 240V, 50/60Hz
Power Consumption
<25W
Dimension
Weight
355mm X 75mm x 285mm (W/H/D)
About 4 kg
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories.
All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 35 -
the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-
400-2443.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and
licensed for use on the FDM-0700A to Petters Consumer Brands, LLC.
Download from Www.Somanuals.com. All Manuals Search And Download.
- 36 -
|