5.6” Portable DVD Player
Model: PDV-0560M
Operations Manual
20040917
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be sufficient to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
POWER SUPPLY:
Connect the supplied adapter to the side of the attached LCD display in the slot marked
with “DC12V In”. Use the supplied power cord to connect the jack marked “DC12V Out”
on the side of the attached LCD screen and the jack marked with “DC12V In” on the
side of the player, then plug the two-prong end of the power cord to an AC100-240V
outlet. If you have difficulty inserting the plug, turn it over and reinsert it. If the unit will
not be used for a long time, disconnect the plug from the outlet.
NOTE:
Before plugging the power cord into an AC outlet, make sure that all the connections
have been made.
CAUTION: These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer to
service manual for servicing instructions.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
1. Read these instructions.
IMPORTANT FOR LASER PRODUCTS
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
1. CLASS 1 LASER PRODUCT
2. DANGER: Visible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user service-able
parts inside the unit. Leave all servicing to qualified service personnel.
This unit complies with FDA regulation for radiation control of laser products.
openings. Maintain well ventilated conditions around the product. Do not put
product on bed, sofa or anything that blocks ventilation. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized. A polarized plug has two blades
with one wider than the other. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
15. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Copyright Protection
Unauthorized copying, broadcasting, public performance, and lending of disks are
prohibited. This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Characteristic Features
ESP Function
About this player
Built-in electronic shock protection (ESP)
circuitry.
This player incorporates a DVD player,
color LCD screen display, 2 channel
stereo audio output functions.
When used in a vehicle, this player can
be powered with the 12VDC car
adapter.
AV Function
This player can be connected to
external AV inputs.
Advanced Features
High Quality Properties
Compatibility
High Resolution
Plays DVD, CD, CD-R, CD-RW,
PICTURE CD and MP3 discs.
Particular Performance
MPEG2 decoding format achieves more
than 500 lines of horizontal resolution.
Excellent Sound
Multi-speed, fast forward, fast backward,
slow play and repeat playback.
Search By Time
Build-in Dolby decoder to output digital
audio signal for high quality sound
reproduction.
Search for a certain time on a disc.
Last Memory Playback
Screen
5.6’ Color TFT LCD screen presents a
high resolution picture and supports 4:3
aspect ratios.
In power on status, memorizes and
continues playing from place stopped
(only available for DVD, CD disc).
Special Functions
Supports
multi-angle
and
extra
language caption.
Video Out
Standard video output.
Audio Out
Audio output terminal for connection to
audio amplifiers.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Information
Disc Formats Supported By This Player
PLAYBACK TIME/
PLAYABLE SIDES
DISC LOGO
DIAMETER
133 min
242min
266min
484 min
(SS-SL)
(SS-DL)
(DS-SL)
(DS-DL)
12cm
DVD
12cm
74min
CD
8cm
20min
600min
MP3
12cm
The operating method of some DVD discs is specified by the software maker. Please
refer to the instruction manual of the disc. The DVD player will play most recordable
(CD-R) or erasable (CD-RW) CDs, but playback of CD-R or CD-RW discs created on a
computer requires proper formatting and finalization of the disc for audio playback.
Some computers and/or software programs may not be capable of creating compatible
discs.
Care of Discs
Cleaning of Discs
Do not touch the playing surface of the
compact disc.
If a disc has fingerprints or dust on it,
lightly wipe the disc with soft cloth (or
similar) from the center of the disc
outward in a radial manner.
Do not stick paper or labels on the disc.
Storage of Discs
Never use record cleaning sprays,
benzene, thinner, static electricity
prevention liquids or any other solvents
to clean your discs.
Do not expose discs to direct sunlight.
Do not place discs near water or in
dusty place.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description DVD Player
Front View
Open the cover to view the fashionable design of the unit:
1. OPEN button
7. ■ STOP button
Press to open the disc tray.
2. TITLE button
Press to stop playback.
8. ► PLAY/PAUSE button
Press once to pause playback.
Press again to resume playback.
9. Remote sensor
Press to display title menu (if present)
on the disc.
3. ꢀ REV button
Press to search backward.
4. ꢁ FWD button
Receives the signal from the remote
control.
Press to search forward.
5. ꢂ PREV SKIP button
Press to return to the previous menu or
chapter/track.
10. Indicators
During DVD playback, lights green.
Under standby mode, lights red.
11. Direction buttons (ꢄ ꢅ ꢆ ꢇ)
Use ꢄ ꢅ ꢆ ꢇ buttons to select menu
items.
6. ꢃ NEXT SKIP button
Press to skip to the next menu or next
chapter/track.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Description-DVD Player
12. OK button
Right View
Press to confirm selections in the menu.
13. MENU button
Press to turn the menu on/off.
14. Disc tray cover
Press the OPEN button to open the tray
for loading disc.
1. Headphone/speaker volume knob
Use to adjust the volume of the
headphone and speakers.
15. Speakers
Produce high quality sound.
16. Bright adjusting button
Press to adjust the brightness of the
LCD screen.
2. Headphone jack
Connection for the headphone. When
the headphone is plugged in, the built-in
speakers will be turned off.
17. Contrast adjusting button
Press to adjust the contrast of the LCD
screen.
3. Audio input/output jack
Under AV IN mode, this jack is for audio
input.
18. Color adjusting button
Press to adjust the color of the LCD
screen.
Under AV OUT mode, this jack is for
audio output.
19. LCD screen
4. Video output/input jack
Under AV IN mode, this jack is for video
input.
Designed with TFT LCD display, clearly
show the data on discs.
Under AV OUT mode, this jack is for
video output.
Left View
5. AV ‘IN’ and AV ‘OUT’ Switch
Switch to AV “IN” position to put the unit
into audio/video input mode.
Switch to AV “OUT” position to put the
unit into audio/video output mode.
6. Direct current input jack
12V DC power input socket.
1. Headphone input jack
Connection for the headphone. When
the headphone is plugged in, the built-in
speakers will be turned off.
2. POWER ON/OFF switch
Switch the power of the player on or off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Correct use of the Remote Control
Point the remote control at the unit from
no more than about 5 feet from the
remote control sensor and within about
60 degrees of the front of the unit. Do
not place objects between the remote
control unit and the remote control
sensor.
Use Of Remote Control
Preparation of remote control
Remove the battery compartment in the
direction of the arrow. Place the lithium
battery in the battery compartment.
Make sure the polarity matches the
marks inside the compartment. Insert
the compartment into the remote.
Under normal use the battery will last for
about one year. If the remote control unit
fails to work even when it is operated
near the player, replace the battery.
Take out the battery when the remote is
not used for a long time.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Remote Control Drawing
1. POWER button
4. Direction buttons (▲ ▼ ◄ ►)
Press to put the unit into standby mode.
Press again to put the unit into working
mode.
Use ▲ ▼ ◄ ► to select menu items.
5. ENTER button
Press to begin the playback.
Press to confirm the items or setting.
2. INFO button
Press for detailed information on the
disc playing.
6. SETUP button
Press repeatedly to remove information
from screen.
Press to access the DVD player’s setup
menu.
3. TITLE button
7. 0-9 number buttons
Press to display title menu if present on
the disc.
Select track numbers.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
8. ꢂ PREV button
17. STOP button
Press to skip to the previous
track/chapter.
Press once to stop playback and then
press the PLAY button to resume
normal playback.
9.ꢃ NEXT button
Press the button twice to stop playback
completely.
Press to skip to the next track/chapter.
10. SUBT button
18. PLAY button
When a DVD is playing, press to select
a subtitle language or the turn subtitle
off.
Press to begin playback.
19. GOTO button
Press to select the desired disc starting
time, chapter or title.
11. ANGLE button
Press to access various camera angles,
if the DVD disc contains multiple
camera angles.
20. +10 button
Select track numbers greater than 9.
12. A-B button
21.ꢁ FWD button
Press to mark a segment to repeat
between A and B.
Press to search forward.
22.ꢀ REV button
13. ZOOM button
Press to search backward.
Press to cycle through zoom function.
23. SLOW button
14. REP button
Press to activate slow forward or slow
rewind.
Press to repeat a track, chapter, title or
all content.
24. AUDIO button
15. MENU button
Press to turn of/off the menu.
Press to access various audio
Languages, if the DVD disc contains
multiple audio languages.
16. PAUSE button
Press to pause playback.
Press the PLAY button to resume
normal playback.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Do not connect the power to the unit until all audio and video connections have been
made. Switch AV IN/OUT to AV/OUT mode for playing discs. Connect the audio/video
output jacks to the corresponding jacks on the TV, amplifier or speaker.
Connecting to TV
Connections should be made as follows:
Connecting to an Amplifier
12
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting to Audio/Video Sources
Move the switch “AV IN/OUT” to “IN” position on the right panel to put the unit into
audio/video input mode.
Use the audio cable to connect the AUDIO socket of your DVD player with the audio
output socket of external AV signal source.
Put one plug of the video cable into the VIDEO socket at the player’s side. Put the
other plug into the video output socket of external AV signal source.
Connecting to Power Adapter
The player is supplied with a switching power adapter. Connections should be made as
follows:
• Connect the rabbit joint end of the AC adapter to the power cord. Connect the AC
adapter to the side of the DVD player in the slot marked “DC+12V”. Plug the power
cord into an electrical socket. See the below figure:
13
Download from Www.Somanuals.com. All Manuals Search And Download.
System Connections
Connecting To Car Adapter
You can use Car Adapter in a vehicle:
1. This player can be powered with a car adapter. (The car adapter is included)
2. Connect the Car Adapter Power Plug into the unit’s Power Jack and the other end
into the Vehicle Cigarette Lighter Socket:
Note: Make sure the unit and the car adapter are not connected when starting the car.
Do not leave the battery attached when using the car adapter.
Connecting To Headphones
Plug the headphone connector into the headphone jack on the right side of the DVD
player. See the below figure:
•
•
Excessive loud usage of headphones could damage your hearing.
Turn down the volume before you connect the headphones and then raise the
volume to suit your level.
•
When the headphone is plugged in, the unit’s external speakers will be turned off.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
About Rechargeable Battery
Normally the player is powered by connecting it to an AC power supply using the
adapter. When used as a portable player outdoors or when traveling, the unit comes
with a lithium ion rechargeable battery that attaches to the bottom of the player. You
can enjoy the DVD player wherever you are.
Usage of the Rechargeable Battery
1. Turn the player upside down on a smooth,
clean surface. Fit the battery so that the
battery contacts and the five plastic tabs
are aligned with the matching contacts and
tab recesses on the player.
2. With one hand on the player to prevent it
from moving, push the battery pack on to
the player then slide the Battery Pack
toward the front of the player until you hear
it click and lock into place.
3. Plug the Power Adapter into the player’s
DC-IN 12 V Jack (located on Right Side of
player). Plug the other end of the Power
Cord into a household wall power outlet.
4. The properties of the rechargeable battery are: 7.4 Volts, with a capacity of
2300mAh, interior lithium ionic electric protection for recharge and discharge.
5. A fully charged battery will play a DVD with the LCD screen on for about 2 hours.
6. If the battery loses power, an indication on the screen will warn you. When this
happens, switch off the player. Otherwise, the player will turn off automatically
within a few seconds.
7. If the battery is not used, it will discharge gradually in about a month.
8. Charging time is normally about 4 hours.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
About Rechargeable Battery
Detaching Battery Pack
Important Note: Detach battery when not in use for an extended period of time to
prolong the battery’s service life.
1. Press the tab towards the front of the unit.
Hold the tab in the up position.
2. Gently slide the Battery Pack toward the back of the Unit.
Carefully lift the Battery Pack from your player.
Working conditions and precautions
New batteries should be fully charged before initial use.
If you don’t plan on using the battery for an extended period of time and keep it in a dry
and cool place.
Battery should only be used and charged when temperatures are between 32-95F.
Maintain well-ventilation conditions around the product, avoid heat.
Never heat the battery or put the battery in fire.
Never put the battery in water.
Don’t use metal to link positive pole to negative.
Do not open the battery. Refer servicing to qualified personnel.
Do not charge the battery pack more than 8 hours as it could reduce its service life.
Detach the battery pack when not in use.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
Basic operation
Load the disc into the disc tray with the
label side up, see the figure below.
Load the disc as shown in order not to
damage the player or the disc.
Preparation
After the connections have been made,
turn on the relevant equipment and
select the desired video input before
playback.
Open the LCD screen
Press the button on the main panel, lift
the LCD screen upward.
Turn on the player’s power
Turn on the player’s power by switching
the POWER switch on the side of the
player to “ON”. When power is on, the
player will search the disc automatically,
if there is a disc loaded, the player will
start to play it automatically.
Close the disc tray cover so that it clicks.
Playback will start automatically.
During DVD playback, depending on
discs, it will start playback directly or
there will be a DVD menu or title menu
displayed on the screen.
POWER
OFF
ON
||| ▲ |||
During CD disc playback, the unit will
play the tracks in sequence.
Press OPEN button on front panel to
open the disc cover.
OPEN
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
DVD PLAYBACK
During playback, press the COLOR,
CONTRAST and BRIGHT buttons on
the front panel of the DVD player to
adjust the picture.
Region Code
This
manufactured to respond to the region
management information that is
player
is
designed
and
During
playback,
rotate
the
recorded on a DVD disc. If the region
code described on the DVD disc does
not correspond to the region code of this
player, this player cannot
earphone/speaker volume knob to
increase and decrease the volume.
VOLUME
play this disc. The region
4
code of this player is “4”.
To interrupt playback press the STOP
button once.
Menu
Normally there is a selecting menu in a
DVD disc. You can use the MENU
button to enter the selecting menu
directly, and use the direction buttons to
highlight the item you would like and
press the ENTER button to select it.
STOP
Press the OPEN button on the front
panel to open the cover and take out the
disc. Switch the POWER switch to the
OFF position. (Turn off the relevant
power supply)
Title & Chapter
Normally there are several titles in a
DVD disc, and also there are several
chapters in a title. Press the TITLE
button to access the title menu and
select any one of titles or chapters
quickly by using the Number buttons to
enter the number of the chapter.
Warning: Bad quality discs may
damage the lens.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
MP3 Playback
Audio
Open the cover and load a MP3 disc in
and close the cover. The screen
displays the MP3 player:
There are up to
8
kinds of audio
languages in a DVD disc. When you
play a multi-language DVD disc, press
the AUDIO button on remote control to
select a different audio language.
00:00
00:00
001/010
MP3＿01
Subtitle
MP3＿02
MP3＿03
MP3＿04
MP3＿05
The DVD player can support up to 32
kinds of subtitles. When you play a
multi-subtitle disc, press the SUBTITLE
button on remote control to select
different subtitle.
Use the ▲/ ▼ direction buttons to
select the desired folder. Press the
ENTER button to enter it.
For example, use the ▲/▼ direction
buttons to choose the Folder 1, press
the ENTER to enter it. Now the tracks
inside are displayed.
Angle
The DVD player supports multi-angle
function. Multi-angle means that
a
scene is shot from more than one angle
so that audience can watch from
different angles. If there are multiple
angles in a scene, you can use the
ANGLE button to select the desired
angle.
00:00
00:00
001/010
\ MP3_01\
--
MP3
MP3
MP3
101
102
103
104
MP3
Use the ▲/▼ direction buttons to
choose the desired track, press the
PLAY or the ENTER button to begin the
playback.
CD Playback
The player will play all tracks for CD
discs continuously in default status. You
can press the ꢂ and ꢃ (PREV/NEXT
SKIP) buttons or number buttons to
select a certain track.
Press the STOP button to stop the
playback. And then press the PLAY
button, the playback will start from the
beginning of the current track.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
Press the ꢄdirection button to return
Picture Rotation
to the root menu.
Pictures can be flipped and rotated
while they are displayed. Once another
picture is selected, rotating function will
be turned off.
JPEG Playback
JPEG is a common picture format that
requires very little storage per image
There are four rotational modes
available. Use the direction buttons to
choose:
with
a
low loss rate in resolution.
Hundreds of pictures can be stored on a
disc in this format. In order to create
digital albums from film pictures, have
your film developer make a ”PICTURE
CD”, in JPEG format.
▲UP
Flip Vertical
▼DOWN Flip Horizontal
WLEFT
Rotate Counter Clockwise
XRIGHT Rotate Clockwise
Normal Playback
Zoom of Picture
Load a JPEG disc in. After reading the
disc, the OSD will display the menu.
Press the ENTER button to enter the
menu. Use ▲/▼ direction buttons to
choose the folder, use the X button to
enter the picture folder. Use the ▲/▼
direction buttons to choose the desired
item and then press the ENTER button
to begin the playback.
ZOOM button is used to turn on/off
zoom and move function.
When the zoom function is turned on,
use the fast forward or reverse scan
button to zoom in and out. Use the
direction buttons to pan around on the
image. Press the STOP button to
activate preview mode. Press the
MENU button to return to the root menu.
(Many discs have other items besides
pictures.)
Note: Due to the various ways JPEG
discs are made, some images can only
be played normally with no rotate or
zooming functions.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Stop
A-B Repeat
During CD, DVD playback, press the
STOP button on the remote control to
stop playing. Press the PLAY button and
then the player will resume play from the
point where it stopped. Pressing the
STOP button twice will stop the unit
completely. Pressing the PLAY button
again will play the disc from the
beginning.
Use the A-B button to repeat a section A
to B. During playback, press it once to
set the starting point A, then a second to
set the ending point B, and the third time
to cancel repeat.
A
B
During MP3 playback, press the STOP
button to stop the playback. And then
press the PLAY button, the playback will
start from the beginning of the current
track.
Fast Forward & Rewind
Press the ꢁ button to jump forward in
discrete steps of 2x, 4x, 8x, 16x or 32x
normal playing speed.
Likewise, press the ꢀ button will allow
you to jump backward in discrete steps
of 2x, 4x, 8x, 16x or 32x normal playing
speed.
Pause
Press the PAUSE button on the remote
to pause. Press the PLAY button to
resume normal playback.
During any fast forward or backward
playback status, press the PLAY button
to resume normal playback.
Repeat
During
CD
playback,
repeatedly
pressing the REPEAT button will display
a menu as follows: Track and All.
During MP3 playback, repeatedly
pressing the REPEAT button will display
a menu as follows: Single, Repeat One,
Repeat Folder, Folder, Shuffle and
Random.
Slow Playback
During VCD disc playback, continuously
press the SLOW button to start slow
forward playback in discrete steps of 1/2,
1/4, 1/8, 1/16 or normal playing speed.
During DVD playback, continuously
press the SLOW button to slow forward
or rewind in discrete steps of 1/2, 1/4,
1/8, 1/16 or normal playing speed.
During DVD playback, repeatedly
pressing the REPEAT button will display
a menu as follows: Chapter, Title and
All.
Some discs do not support this function.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Normal playback is resumed when you
press the PLAY button.
When the picture is enlarged, use the
direction buttons to pan up, down, left
and right.
There is no slow playback function for
CD and MP3 discs.
There is no zoom function for CD and
MP3 discs.
Play
Press the PLAY button to start playback.
Press the POWER button on the remote
control to enter the standby status, and
press it again to enter playing status. If
there is no operation for a long time, the
player will automatically enter screen
saver status and then enter standby
status.
Search By Time
Use the GOTO button to search by time,
namely to play from a specific time.
During DVD playback, press the GOTO
button once and TV screen will display
the title or chapter, then you can use
number buttons to select any one of
them.
Disc Information Display
Press the GOTO button twice and use
the number buttons to input the desired
time in sequence of hour, minute,
second. Press the ENTER button to
confirm and start playback from the
input time.
Press the INFO button on remote
control to display the relevant disc
information.
Zoom
To enlarge or reduce the picture, press
the ZOOM button on the remote control.
Continually pressing the zoom button
will change the mode accordingly:
Enlarge x2, enlarge x3 and enlarge x4
or reduction x1/2, reduction x1/3 and
reduction 1/4 repeat press the ZOOM
button on the remote control to resume
normal playback.
During CD disc playback, press the
GOTO button twice, then you can use
number buttons to input the time you
desired (hour, minute, second), and the
player will play from the input time.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Setup Menu
Press the X button to access it.
In stop status, press the SETUP button
on the remote control and the TV screen
will display a main menu. Press the
SETUP button to exit the setup menu.
- - General Setup Page - -
TV Display Wide Normal/PS
Angle Mark
OSD Lang
Captions
On Normal/LB
ENG Wide
Off
Screen saver On
- - General Setup Page- -
Set TV Display Mode
TV Display
Angle Mark
OSD Lang
Captions
Wide
On
ENG
Off
Screen Saver
On
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
Go To General Setup Page
Use W / X direction buttons to choose
the item, press the ENTER button or the
▼ button to enter it.
Normal/PS Choose this mode when
your TV set has 4:3 screen format. The
picture will fill the screen but the right
and left portion will be cut.
General Setup
Use the W / X buttons to select a
category. Press the ENTER button or
the ▼ to access the submenu. Use
▲/▼direction buttons to select the item
you want to set: TV Display, Angle Mark,
OSD Lang, Captions and Screen Saver
Normal/LB Choose this mode when
your TV set has 4:3 screen format.
The picture will appear in its entire width
but framed by black bars at the top and
the bottom.
Wide Choose this mode when using a
16:9 wide screen TV set.
TV Display
Note: During DVD playback, please
choose the correspond aspect ratio to
match the DVD disc.
In the General Setup Page, use the
▲/▼ direction button to highlight the
“TV Display” to bring up the menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Angle Mark
In the General Setup Page, use the
▲/▼ direction buttons to highlight the
“Angle Mark.” Press the X button to
access it.
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
- - General Setup Page - -
Captions
TV Display
Angle Mark
OSD Lang
Captions
Wide
On
In the General Setup Page, use the
▲/▼ direction buttons to highlight the
“Captions” to bring up the menu. Press
the X button to access it.
On
Off
ENG
Off
Screen Saver
On
- - General Setup page- -
Set Angle Mark
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
ENG
Off
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
On
Off
On
Closed Caption
This function is effective only if
alternative viewing angles are available
on the disc, Choose “On”, the camera
symbol appears on the LCD screen as
soon as various perspectives are
available on the DVD. Choose “Off” and
on camera symbol will disappear.
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
Captions: This function is available only
if your TV’s type is NTSC and the disc
has hidden captions. You can choose
captions on or off on screen during
playback.
OSD Lang
In the General Setup Page, use the
▲/▼ direction buttons to highlight the
“OSD Lang” to bring up the menu. Press
the X button to access it.
Screen Saver
- -General Setup Page - -
In the General Setup Page, use the
▲/▼ direction buttons to highlight the
“Screen Saver” and bring up the menu.
Press the X button to access it.
TV Display
Angle Mark
OSD Lang
Captions
Wide
ON
ENG English
Off CHINESE
On FRENCH
SPANISH
GERMAN
Screen Saver
24
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Dolby Digital Setup
- -General Setup Page- -
When Speaker Setup has been done,
press the W to return to category. Use
the X to choose Dolby Digital Setup,
Press the ENTER or the ▼ to enter it.
Use the ▲/▼ direction buttons to select
the item you want to set: Dual Mono or
Dynamic
TV Display
Angle Mark
OSD Lang
Captions
Wide
On
ENG
Off
Screen Saver
On
On
Off
Use the ▲/▼ direction buttons to select
On or Off. Press the ENTER button to
confirm it and return to the last level.
When On is selected, the player will
display a screen saver picture after
playback has stopped for some time.
Select Off for no screen saver.
Dual Mono
In Dolby Digital Setup menu, use the
▲/▼ direction buttons to highlight “Dual
Mono” and bring up the menu. Press the
X button to access it.
- - Dolby Digital Setup - -
Dual Mono
Dynamic
Stereo
L-Mono
R-Mono
Mix-Mono
Speaker Setup
When General Setup has been done,
press the W button to return to the
category menu. Use the X button to
choose Speaker Setup. Press ENTER
or ▼ to enter it and then use the X to
enter the menu.
Dual Mono (1+1) Setup
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
- - Speaker Setup Page - -
Downmix
LT/RT
Stereo
Dynamic
In Dolby Digital Setup menu, use the
▲/▼ direction button to highlight the
“Dynamic” and bring up the menu. Press
the X to access it.
Set Downmix Mode
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
- - Dolby Digital Setup - -
Dual Mono
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
FULL
3/4
Dynamic
1/2
Brightness and Contrast
1/4
In Video Setup menu, use the ▲/▼
direction button to highlight the
“Brightness, Contrast” and press the X
to bring up the menu below:
OFF
Set DRC to Full
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
Brightness｜｜｜｜｜｜｜｜｜｜……….
0
Video Setup
Use the W / X buttons to set the
brightness and contrast of the picture.
Press the ENTER button to confirm it
and return to the last level.
When Dolby Digital Setup has been
done, press the W to return to the
category menu. Use the X to choose
Video Setup and press ENTER or ▼ to
enter it. Use the ▲/▼ direction buttons
to select the tem you want to set:
Sharpness, Brightness or Contrast
Preference Page
This function is only available when the
disc has been stopped. (Press the
STOP button twice to stop the disc
playback completely) Press the SETUP
button to bring up the main menu. Use
the X button to choose Preference.
Sharpness
In Video Setup menu, use the ▲/▼
direction button to highlight the
“Sharpness” and bring up the menu.
Press the X button to access it.
Press the ENTER button or the
▼
button to enter it. Use the ▲/▼
direction buttons to select the item you
want to set: Audio, Subtitle, Disc Menu,
Password, Default Reset and Version
- - Video Setup - -
Sharpness Low
Brightness 00
High
Medium
Low
Contrast
00
Audio, Subtitle, Disc Menu Language
In Preference menu, use the ▲/▼
direction button to highlight the “Audio,
Subtitle, Disc Menu” and bring up the
menu. Press the X button to access it.
Low
26
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
- -Preference Page- -
Audio
ENG
English
Subtitle
Disc Menu
ENG French
ENG Spanish
Chinese
Japanese
Korean
Russian
Default
Version
Thai
Preferred Audio Language
Use the ▲/▼ direction buttons to select
the item you want to set. Press the
ENTER button to confirm it and return to
the last level.
This function is only available for discs
that several audio bit streams have
been recorded onto.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
direction button to highlight the “Default”
and bring up the right menu. Press the
X button to access it.
Default Reset
In Preference menu, use the ▲/▼
direction button to highlight the “Default”
and bring up the menu. Press the X
button to access it.
Version
SUB.VER
8032
03.01.07.03
00.00.00.03
03.01.07.03
40.00.DE.A2
03.01.07.03
02.04.02.56
Servo
RISC
- - Preference Setup Page- -
Audio
ENG
ENG
ENG
Reset
Subtitle
Disc Menu
Default
Version
DSP
This item is to display software version
information.
Load Factory Setting
Press the ENTER if you want to recall
the factory settings. All programmed
settings done so far will be deleted.
Version
In Preference menu, use the ▲/▼
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Carrying Case
INSTRUCTIONS FOR ATTACHING YOUR PORTABLE
DVD PLAYER CASE IN A VEHICLE
Please read and follow these instructions carefully when attaching this case inside
your vehicle. For ease of installation, do not place the DVD player into the case
until after the case is attached inside the vehicle.
CAUTION
1. Do not use this DVD Player Case as a swing, car seat, or for any other
purpose except to hold a DVD player and accessories.
2. The DVD Player Case is intended for viewing only from the rear seats. Do
not install or use this product in the front seat of a vehicle.
3. To reduce the chance of injury in case of collision or a sudden stop:
•
Always keep the DVD player strapped securely inside its case while
the vehicle is moving
•
Always keep the DVD player Case securely attached inside the
vehicle while the vehicle is moving
Your DVD player can be securely attached in one of the following ways to view movies
from the rear seats:
1. Directly behind either the driver or the passenger seat
2. Between two front bucket seats
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
Always position the plastic hooks and strap adjustment slider so that they do not
contact the back of the head of the person in the front seat.
Attach the DVD Player Case to a seat back (Photos 1 & 2):
1. Unzip the main compartment that holds the player; locate the set of rings tucked
inside the top edge of the case (A)
2. Locate the 2 straps with hooks on each end
3. Hook one end of each strap to the rings at the top of the case (A)
4. Criss-cross the straps around the front of the headrest (B) and hook the straps to
a second set of rings on the lower part of the case (C)
5. Tighten up the straps until secured
Photo 1
Photo 2
A
30
Download from Www.Somanuals.com. All Manuals Search And Download.
To suspend the DVD Player Case between 2 bucket seats (Photo
3):
1. Unzip the main compartment that holds the player; locate the set of rings tucked
inside the top edge of the case (A)
2. Locate the 2 straps with hooks on each end
3. Hook one end of each strap to the rings at the top of the case (A)
4. Wrap each strap around the headrest or seat; hook the straps to a second set of
rings on the lower part of the case (C); in some vehicles, the middle rings in the
gusset might work best (D)
5. Tighten up the straps until secured
Photo 3
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
What to check
Make sure the power is on.
No TFT LCD display
Use the BRIGHT +/- on the control panel to
adjust the brightness.
LCD is very bright or dark.
Colors of picture are faded or Use the COLOR +/- on the control panel to
bloomy.
adjust the color.
Make sure a disc is loaded.
Make sure the disc isn’t loaded upside down.
Disc should be clean, not dirty or warped.
Player’s region code should be the same as
region code of DVD disc.
The player does not play discs
or the display shows: no disc.
Has water condensation occurred?
If it has, remove the disc. Keep the disc and
the player powered up for about one hour.
Make sure the volume is not set to minimum.
Make sure the headphone is not connected.
Make sure the player is not in pause status.
Make sure the player is not in A-B repeat status.
No sound.
Disc skips and will not continue Is the disc dirty or warped?
to play. If so, clean disc or press the GOTO button to
skip to next chapter.
Make sure there aren’t any obstructions
between the remote and the player.
The remote control does not Make sure you are pointing the remote control at
work.
the player.
Make sure batteries are inserted correctly.
Replace weak batteries.
Other possibilities：
Static or other external interference may cause the player to function abnormally. In this
circumstance unplug the power-supply cord from the outlet and plug it in again to reset
the player so that normal operation can resume. If you are still having problems,
disconnect the power and consult the nearest authorized service center.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Laser Wavelength
Wavelength: 780/650nm
NTSC
Video System
Frequency Response
Audio Signal-to-noise Rate
Audio distortion + noise
Channel Separation
Dynamic Range
20Hz-20kHz ±2.5dB
≥85dB
≤-70dB (1kHz)
≥70dB (1kHz)
≥80dB (1kHz)
0.2
1.0
Audio Out
Video Out
Power
Out Level 2V± , Load 10kΩ
Out Level 1VP-P±0.2, Load 75Ω
Unbalanced Negative
AC100～240V, 50/60Hz
Dimension
Weight
6.69” × 6.1” × 1.53”
About 5lbs.
TFT screen size
5.6 inches (4:3)
Compliance with FCC, FDA - cUL listed E209155
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992-1997 Dolby Laboratories.
All rights reserved.
the US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call
01-800-400-2443.
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and
licensed for use on the PDV-0560M to Petters Consumer Brands, LLC.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|