LCD-1700
LCD-20002005
20050316
Download from Www.Somanuals.com. All Manuals Search And Download.
Brief Operating Instructions
1.Connection
Connect the antenna leador CATV cable or externalequipments(such as Antenna, Cable TV,VCD,DVD,
VTR,Set topbox,etc.)to the corresponding terminals or interface on the TV rear(please refer tothe owners
manual ofthe equipmentto be connected as well)and confirmthat the signal source is available and works
normally.
L
AUDIO IN
R
ANT.IN
S-VHS VIDEO
Y
PB/CB PR/CR
POWER
VGA
A
AUDIO IN
2.The remote control
Open the back batterycover onthe remote control andinstall twoAAAsize batteries and thenclose
the batterycover.
SCAN: Scan available channels
POWER: Power on/off
SCAN
SOURCE
SOURCE: Select one of five inputsignal source
PARENT: Parental lock function
PARENT
LOCK
CCD
LOCK: Set childlock
CCD: Closed captionfunction
SAP
SAP: SAP/stereo/mono selection
MUTE: Mute the sound
MENU: Call upthe main menu
: Cursor up/down
: Select oradjust from a particular menu
/
/
OK
OK: Confirm selectedfunction or returnto the previous menu
RECALL: Return toprevious channel
S.MODE: Select the sound mode
S.MODE
P.MODE: Select the picture mode
VOL+/-:Volume up/down
VOL
CH
CH+/-: Channel up/down
1
4
7
3
6
9
2
5
8
0
CHANNEL NUMBER: Direct Channelselection
SLEEP: Set thesleep timer
DISPLAY: Display currentStatus information
DISPLAY
SLEEP
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
3.Switching on/off
1)Connect the TV topower outlet, the powerindicator willdisplay red. Press the power switchor the POWER
button onthe remote control toturn onthe TV.
2)Press the power switchor the POWER button onthe remote control toturn offthe TV.
4.Signal source selection
Press the number [1-9]button orCH+ or CH- button to select TV input; pressthe SOURCE button to select TV,
Component Video,Analog RGB, Composite Videoor S-Video.
5.Air/Cable selection
Youcan select the signalreceiving method according tothe following steps:
powerd by
POLAROID
preset
1) Press theMENU button to enter themain menu.
tv source
air
auto search
[ or
]
4
4
2) Press the
button toselectthe itemPRESET, and press the
]
buttonto enterPRESET menu.
fine tune
skip
off
4
[
position
[ or
]
3) Press the
4) Press the
cath i.
button toselectthe itemtv source.
button tochange the itemamongair, catv s, catv h and
down for preset settings
[
]
powerd by
6.Channel search
1) Press theMENU button to enter themain menu.
POLAROID
preset
tv source
air
[ or
]
2) Press the
button toselectthe itempreset, and press the
buttonto enterpreset menu.
[ or
auto search
4
4
fine tune
skip
[
]
off
4
]
3) Press the
button toselectthe itemauto search.
position
4) Press the [ ] button tostartauto searchchannels.
down for preset settings
powerd by
7.Picture adjustment
1) Press the MENU button toenter the main menu.
POLAROID
picture
brightness
50
[ or
]
2) Press the
buttonto selectthe itempicture, andpress the
]
button toenter picture menu.
contrast
50
[
color
49
49
44
sharpness
tint
[ or
[ or
]
]
3) Press the
4) Press the
buttonto selectthe itemyou wantto adjust.
buttonto adjustthe level.
color temp
7300K
down for picture settings
8.Audio adjustment
1) Press the MENU button toenter the main menu.
[ or
powerd by
POLAROID
audio
]
2) Press the
buttonto selectthe itemaudio, andpress the
]
button toenter audio menu.
volume
78
[
treble
60
bass
[ or
[ or
]
]
60
50
3) Press the
4) Press the
buttonto selectthe itemyou wantto adjust.
button to adjustthe level.
balance
btsc
mono
on
mute
off
down for audio settings
Note1: All keys mentioned above are on the remote control unless indicated otherwise.
Note2: For more detailed information, please refer to the user's manual.
-2-
Download from Www.Somanuals.com. All Manuals Search And Download.
The lightning flashwith arrowhead symbol,within an
equilateral triangle is intended to alertthe user tothe
presence of uninsulateddangerous voltage withinthe
CAUTION
product's enclosure thatmay be ofsufficient magnitude
to constitute arisk of electricshock.
CAUTION: TO REDUCE THE RISK OF ELEC-
TRIC SHOCK, DO NOT REMOVE
COVER(OR BACK).NO USER-
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation pointwithin an equilateraltriangle is
intended to alertthe user tothe presence of important
operating and maintenance(servicing)instructions in
the literature accompanyingthe TV.
CAUTION: Changes or modifications not expresslyapproved bythe partyresponsible forcompliance with
the FCCRules couldvoid the users authorityto operate this equipment.
WARNING: TO PREVENTFIRE OR SHOCKHAZARD, DO NOTEXPOSE THIS APPLIANCETO RAINOR MOISTURE.
Important safeguards
1. Read instructions
All thesafety and operatinginstructions should be read before theTV is operated.
2. Retain instructions
The safetyand operating instructions should be retainedfor future reference.
3. Heed warnings
All warnings on the TV and inthe operating instructions should be adheredto.
4. Follow instructions
All operatingand use instructions should be followed.
5. Cleaning
Unplug the TV from thewall outlet beforecleaning. Do notuse liquid cleaners or aerosol cleaners.Use a dampcloth
for cleaning.
6. Attachments
The manufacturer of this unit does not makeany recommendations forattachments, as theymay cause hazards.
7. Water and moisture
Do not usethis TVnear water.For example, neara bathtub, washbowl,kitchen sink,
or laundry tub,in a wetbasement, or neara swimming pool,and the like.
8. Accessories
Do not placethis TVon an unstablecart, stand, tripod,bracket ,or table.
The TVmay fall, causingserious injury tosomeone, and serious damage
to the appliance.AnTV and cartcombination should bemoved with
care. Quick stops,excessive force, anduneven surfaces maycause the
TV andcart combination tooverturn.
9. Ventilation
Slots and openings in the cabinetback or bottomare provided for
ventilation, to ensurereliable operation ofthe TVand to protect
it from overheating.These openings must not beblocked or covered.
The openings should never beblocked by placingthe TVon a bed,
S3126A
sofa, rug, orother similar surface.This TVshould never beplaced
near or overa radiator orheat resource. This TVshould not beplaced
in a built-ininstallation such as a bookcase orrack unless properventilation
is provided orthe manufacturer's instructions have been adheredto.
10.Fragility
The LCDpanel used inthis product is made of glass.Therefore, itcan be brokenwhen the productis dropped orapplied
with impact. Becareful not tobe injured bybroken glass pieces in case theLCD panel breaks.
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safeguards
11. Power source
This TVshould be operatedonly from thetype of powersource indicated onthe marking label.If you arenot sure ofthe type of
power supply toyour home, consultyour appliance dealeror local powercompany. For TVs intended to operatefrom battery
power, orother sources, referto the operatinginstructions.
12. Power cordprotection
Power-supply cords shouldbe routed sothat they arenot likely tobe walked onor pinched byitems placed uponor against
them, paying particularattention to cords at plugs, conveniencereceptacles, and thepoint where theyexit from theappliance.
13. Outdoor antennaGrounding
If an outsideantenna or cablesystem is connectedto the TV,
be sure theantenna or cablesystem is groundedto provide
some protection againstvoltage surges andbuilt-up static
charges. Section 810of the NationalElectrical Code,
ANSI/NFPA NO.70,provides information withrespect to proper
grounding of themast and supportingstructure, grounding of
the lead-in wireto an antennadischarge unit, sizeof
grounding conductors, locationof antenna discharge
unit, connection togrounding electrodes, andrequirements
for the groundingelectrode.
14. Lightning
For added Protectionfor this TV receiver duringa lightning
storm, or whenit is leftunattended and unusedfor long
period of time,unplug it fromthe wall outletand disconnect
the antenna orcable system. This will preventdamage to
the TVdue to lightingand power linesurges.
15. Power lines
An outsideantenna system shouldnot be locatedin the vicinityof overhead powerlines, or otherelectric light orpower circuits,
or where itcan fall intosuch power lines.When installing anoutside antenna system,extreme care shouldbe taken tokeep
from touching suchpower lines orcircuits as contactwith them mightbe fatal.
16. Overloading
Do not overloadwall outlets andextension cords as this can resultin a riskof fire orelectric shock.
17. Object andliquid entry
Never push objects of any kindinto this TV through openings as they maytouch dangerous voltagepoints or shortout parts that
could result infire or electricshock. Never spillliquid of anykind into theTV.
18. Servicing
do not attemptto service this TV yourselfas opening orremoving covers mayexpose you todangerous voltage orother hazards.
Refer all servicingto qualified servicepersonnel.
19. Damage requiringservice
Unplug this TV from thewall outlet andrefer servicing toqualified service personnelunder the followingconditions:
a. When thepower supply cordor plug is damaged or frayed.
b. If liquidhas been spilled,or objects havefallen into theTV.
c. If theTV ha been exposed torain or water.
d. If theTV does not operate normallybe following theoperating instructions.Adjust only thosecontrols that arecoved by the
operating instructions, as an improper adjustmentof other controls may result indamage and willoften require extensive
work by aqualified technician torestore the TV to its normal operation.
e. If theTV has been dropped ordamaged in anyway.
f. When theTV exhibits a distinct changein performance, this indicates a needfor service.
20. Replacement parts
When replacement parts are required, besure the servicetechnician uses replacementparts specified byus that havethe
same characteristics as the original part.Unauthorized substitutions mayresult in fire,electric shock, injuryto persons orother
hazards.
21. Safety check
Upon completion ofany service orrepairs to this TV,ask the servicetechnician to performroutine safety checks to determine
that the TV is inproper operating condition.
22. Heat
This TVproduct should besituated away fromheat sources suchas radiation, stoves,or other products (including amplifiers)
that produce heat.
23. Non-active pixels
The LCD panelis a veryhigh technology productwith 921,600 thinfilm transistors, givingyou fine picturedetails. Occasionally,
a few non-active pixels may appearon the screenas a fixedpoint of blue, green orred. Please notethat this does not affectthe
the performance ofyour product.
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about your new TV
Youcan operate yourTV byusing the buttons on the front panel or theremote control. Theterminals on the
front and theback panel provideall the connections you will needto connect otherequipment to yourTV.
Front Controls
CH
VOL
TV/AV MENU
9
Back Connections
A
AUDIO IN
8
L
AUDIO IN
R
ANT.IN
POWER
S-VHS VIDEO
Y
PB/CB PR/CR
VGA
Note: The above figures are for reference only, please refer to the actual units to determine their appearance.
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about your new TV
POWER button(standby)
Channel up/ cursorup
YPBPR/YCBCR input
PC VGAinput
POWER indicator
Remote SensingWindow
Channel down/ cursordown
CATVantenna input
AVaudio inputL
POWER PLUG
Headphone jack
MENU button
TV /AV /PC inputselect
Volume up /cursor right
AVaudio inputR
9 Wall mountinglocating hole
S-Video input
AVVideo input
Volume down /cursor left
Selecting a location for the TV
1)Place the TV onthe flooror ona sturdyplatform ina locationwhere lightdoes notdirectly hitthe screen.
2)Place the TV farenough fromthe walls to allowproper ventilation. Inadequate ventilationmay cause
overheating, whichmay damage the TV.
NOTE: Please contact localdealer forwall mounting.
Connecting your TV
Caution: Do not plug the TV in until you have finished connecting all of your equipment.
Connecting audio/visual equipment
Follow the instructions below to hookup a VCR, DVD, STB, satellite receiver, camcorder, audio amplifier, etc.
Use your remote control to select signal sources.
HDTV STB
ADAPTER
VCD, DVD
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
NOTE: 1)Headphones are not includedin the supplied
accessories.
2) Nosound willbe heardfrom the main unitspeaks
when a headphone mini-plugis connectedinto
the headphone jack.
AN
AUDIO IN
Headphone
Connecting the PC or NB
You can use yourTV as a monitor for your PC or NB by connecting through its 15pin standard RGB interface . Connect
the devices as shown below.
PC/NB
To VGA
RGB line
Connecting the aerial
To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor aerial (not supplied).
Perfect picture quality requires a good signal and generally means that an outdoor aerial must be implemented. The
exact type and location of the aerial will depend on your particular area. Consult your local dealer or service
personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor aerial is not needed.
Connect the equipments as the following figure.
Plug(not supplied)
REAR VIEW
COAXIAL CABLE(75
)
OR
AERIAL SOCKET
The signal comesfrom:
! An outdoor aerial
! An indooraerial
TWIN-LEAD FEEDER(300
)
Adaptor (not supplied)
ANT.IN
Loosen the screw
Insert the feeder in
Tighten the screw
AN
AUDIO IN
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
Connecting a cable converter box
This televisionhas anextended tuningrange andcan tune most cable channels withoutusing a cable
company suppliedconverter box. Some cable companies offerpremium paychannels inwhich signalis
scrambled. Descramblingthese signals for normalviewing requires the use of a descrambler device which
is generallyprovided bythe cable company.
For subscribers to Basic Cable TV Service
For basiccable service not requiringa Converter/Descramblerbox, connectthe CATV 75ohm Coaxial
Cable directlyto the Antenna Jack onthe backof the television.
For subscribers to Scrambled Cable TV Service
If yousubscribe toa cable service whichrequires the use ofa Converter/Descramblerbox, connectthe
incoming cable to the Converter/Descrambler boxand connectthe outputof the box tothe Antenna Jack
on the back ofthe television. Follow the connections shownbelow. Set the television tothe outputof the
Converter/Descrambler box(usuallychannel 3or 4)anduse the Converter/Descrambler boxto select
channels.
For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels
If yousubscribe toa cable service inwhich basiccable channels are unscrambledand premiumchannels
require the use ofa Converter/Descrambledbox, youmay wishto use a two-setsignal splitter(sometimes
called[two setcoupler) andanA/B Switchbox fromthe cable installer oran electronics supply store.
Follow the connections shownbelow. With the switch inthe B position, youcan directlytune any
nonscrambled channels on yourTV. Withthe switchin the A position, tune your TVto the output ofthe
Converter/Descrambler box(usuallychannel 3or 4)and use the boxto tune scrambled channels.
Note:
When you use a converter box with your TV, there may be features that you cannot
program using the remote control.
L R
AUDIO IN
ANT.IN
POWER
S-VHS VIDEO
Y
PB/CB PR/CR
VGA
Converter/Descrambler
Converter/Descrambler
A/B Switch
Splitter
-8-
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Preparing the remote control for use
Installing the remote control batteries
1. Openthe batterycover onthe backof the remote control.
2. InstalltwoAAAsize(1.5V) batteries. Match the + and - signs on the batteries tothe signs on the battery
compartment.
3. Close the batterycove.
Note:
1.Dispose of your batteries in a designated disposal area. Do not throw your batteries into fire.
2.Do not mix battery types or combine used batteries with new ones.
3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.
4.If you do not intend to use the remote control for a long time, remove the batteries.
5.The effective range of remote control is suggested in the figure.
30
30
6m
-9-
Download from Www.Somanuals.com. All Manuals Search And Download.
Shortcut keys operation
Connecting POWER
AN
AUDIO IN
Notes: 1. Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
2. Always unplug the AC adapter from the product and power outlet when not using for a long period of time.
ON/OFF Standby
Press POWER on the remote control to turn off the LCD TV, the POWER indicator will turn red.
Press POWER again to turn the LCD TV back on, the POWER indicator will turn blue.
Selecting the signal source
1. Turn onthe powerof the connected videoequipment.
2. Press SOURCE select the applicable inputsource. The screen displays TV, Component
Video, Analog RGB, Composite Videoor S-Videomode eachtime SOURCE is pressed.
INPUT TERMINAL
Antenna
DISPLAY
TV
TV
Component Video
Analog RGB
YCBCR/YPBPR
D-Sub15
Component Video
Analog RGB
Composite Video
S-Video
Composite Video Composite Video
S-Video
S-Video
-10-
Download from Www.Somanuals.com. All Manuals Search And Download.
Shortcut keys operation
Adjusting sound volume
Press VOL+ or VOL- on the remote control or
on the TV to increase or decrease the sound volume. The
VOL
segment of the indicator will increase or decrease.
Muting the sound
Press the MUTE on the remote controlto temporarilyturn offthe sound.To restore the sound, press MUTE
again.The mute function is automatically turnedoff whenany ofthe followingbuttons are pressed: POWER,
VOL+/-, or SAP .
Changing channels
To change the channel, you can
1.Press CH + or CH- on the remote control or
on the TV.
CH
2.Press the channel number buttons(0-9).
1) To select a one-digit channel : Press the 1-9 button to select channel directly.
2) To select a two-digit channel : Press a button from 1-9 to select the first number, then press a button
from 0-9 again to select the second number. For example, to select channel 28, press the 2 button first ,
--2 will appear on the screen, and then press the 8 button, -28 will appear on the screen for one second.
3) To select a three-digit channel: Press the 1 button to select the first number, then press buttons from 0-9
successively to select the other two numbers. For example, to select channel 120, press the button 1 ,
--1 will appear on the screen, then press the button 2 and the button 0 successively.
Displaying the current channel number on screen
Press the DISPLAY button on the remote control, the current channel number and TV source mode will display on the
top-right corner of the screen. Whenever you want to cancel it, press the DISPLAY button again.
Switching between two channels
Press the RECALL button on the remote control to return to the previous channel that you have just viewed.
Press the RECALL button repeatedly, the screen will alternate between the present and previous channels.
Setting the child lock
Press the LOCK button to lock or unlock the TV.
When the TV is locked, the screen will turn to black background, and nothing can be viewed unless you press
LOCK again to unlock it.
Setting the sleep timer
Press SLEEP on the remote control to display SLEEP TIMER screen. Press SLEEP continuously to progressively set
the sleep timer for longer periods of time starting with 10 minutes, 20 minutes, 30 minutes, 60 minutes, 90 minutes,
120 minutes,180 minutes, 240 minutes and then back to 0 minute. Selecting 0 minute turns the sleep timer off.
-11-
Download from Www.Somanuals.com. All Manuals Search And Download.
Shortcut keys operation
Selecting the picture mode
P.MODE
You can select the picture quality instantly from among three preset
modes and one user-set mode. Press the P.MODE button on the remote
control repeatedly to select the desired picture quality.
Standard
Soft
User
Dynamic
Selecting the sound mode
S.MODE
You can select the sound effect instantly from among three preset
modes and one user-set mode. Press the S.MODE button on the
remote control repeatedly to select the desired sound effect.
Standard
News
User
Music
Selecting BTSC/SAP broadcasts
You can enjoy watchingTV while you listen to high-fidelity stereo sound with the BTSC feature. BTSC can
also transmit a second audio program(SAP) containing a second language or other audio information.
Press the SAP button on the remote control to switch among Mono, Stereo and SAP
NOTE: In the main menu, you can acquire the same effects by adjusting the sound menu.
Scanning all available channels
You can scan all available channels by press the SCAN button on the remote control .
Using CCD
You can set CCD function by press the CCD button on the remote control . See page 16 for more details .
Using Parental Function
You can set Parental function by pressing the PARENT button on the remote control .See page 16 for more details .
-12-
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
Using the PICTURE menu
Adjust picture settings
powerd by
1) Press the MENU button to enter the main menu.
POLAROID
[ or
]
]
]
2) Press the
button to select the item PICTURE,
button to enter PICTURE menu.
button to select the item you want to adjust.
button to adjust the level.
picture
[
brightness
50
and press the
contrast
50
[ or
3) Press the
4) Press the
color
49
49
44
[ or
]
sharpness
tint
5) The adjusted data is stored automatically in the user mode.
NOTE: 1) The disabled items will disappear. For example, tint will
disappear unless the valid input signal is NTSC mode.
2) There are some differences among different input mode .
For example, phase and frequency will disappear
unless the input signal is from PC.
color temp
7300K
down for picture settings
3) The item color temp is for reference only.
Using the AUDIO menu
Adjust audio settings
1) Press the MENU button to enter the main menu.
powerd by
POLAROID
[ or
]
2) Press the
button to select the item AUDIO, and press
]
button to enter AUDIO menu.
audio
[
the
volume
78
treble
60
[ or
[ or
]
]
3) Press the
4) Press the
button to select the item you want to adjust.
button to adjust the level.
bass
60
50
balance
btsc
mono
on
5) The adjusted data is stored automatically in the user mode.
mute
off
down for audio settings
Using the PRESET menu
TV SOURCE
powerd by
You can set tv source for different valid input RF signals.
1) Press the MENU button to enter the main menu.
POLAROID
preset
tv source
air
[ or
]
2) Press the
button to select the item PRESET, and press
auto search
fine tune
skip
4
4
[
]
the
button to enter PRESET menu.
off
4
[ or
[ or
]
]
3) Press the
4) Press the
button to select tv source.
button to switch among air, catv s, catv h and catv i.
position
down for preset settings
AUTO SEARCH
1) Press the MENU button to enter the main menu.
[ or
]
[
]
2) Press the
3) Press the
4) Press the
button to select the item PRESET, and press the
button to select auto search.
button to start auto search.
button to enter PRESET menu.
[ or
[ or
]
]
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
FINE TUNE
1) Press the MENU button to enter the main menu.
[ or
[ or
[ or
]
]
]
[
]
2) Press the
3) Press the
4) Press the
button to select the item PRESET, and press the
button to select fine tune.
button to fine tune the present channel.
button to enter PRESET menu.
SKIP
1) Press the MENU button to enter the main menu.
[
]
[ or
[ or
[ or
]
]
]
2) Press the
3) Press the
4) Press the
button to select the item PRESET, and press the
button to select skip.
button to skip or unskip the present channel.
button to enter PRESET menu.
NOTE: The 'skipped' channels cannot be accessed by CH+ or CH- , but you can access them by digit button.
POSITION
1) Press the MENU button to enter the main menu.
[ or
[ or
[ or
]
]
]
[
]
button to enter PRESET menu.
2) Press the
3) Press the
4) Press the
button to select the item PRESET, and press the
button to select position.
button to select the present channel.
Using the OPTION1 menu
MENU BACKGROUND
powerd by
POLAROID
1) Press the MENU button to enter the main menu.
option1
menu background
[ or
]
2) Press the
button to select the item OPTION1, and press
opaque
english
30sec
on
[
]
the
button to enter OPTION1 menu.
language
[ or
[ or
]
]
osd timeout
black screen
timer
3) Press the
4) Press the
button to select menu background.
button to switch menu background between
4
4
translucent and opaque.
window adjust
down for option settings
LANGUAGE
1) Press the MENU button to enter the main menu.
[
]
button to enter OPTION1 menu.
[ or
[ or
[ or
]
]
]
2) Press the
3) Press the
4) Press the
button to select the item OPTION1, and press the
button to select language.
button to select OSD language among English, French and Spanish.
OSD TIMEOUT
1) Press the MENU button to enter the main menu.
[
]
[ or
[ or
[ or
]
button to select the item OPTION1, and press the
]
]
2) Press the
3) Press the
4) Press the
button to enter OPTION1 menu.
button to select osd timeout.
button to select OSD disappear time among 5 seconds, 10seconds, 15 seconds, 20 seconds,
25seconds, 30seconds, 40seconds, 50seconds, 60seconds and never.
-14-
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
BLACK SCREEN
1) Press the MENU button to enter the main menu.
[
]
[ or
[ or
]
]
2) Press the
3) Press the
4) Press the
button to select the item OPTION1, and press the
button to select black screen.
button to enter OPTION1 menu.
[ or
]
button to switch between on and off.
NOTE: When you enable the black screen, the screen will turn into black screen saver mode in case of no valid input
signal. The screen will turn into auto screen saver mode several seconds later, and into stand-by mode 15
minutes later.
TIMER
1) Press the MENU button to enter the main menu.
[
]
button to enter OPTION1 menu.
[ or
[ or
[ or
[ or
[ or
]
]
]
]
]
2) Press the
3) Press the
4) Press the
Press the
button to select the item OPTION1, and press the
button to select timer.
button to enter timer menu.
button to select the item you want to adjust.
button to change the value.
clock , timer , power pos setting
clock
10 : 10 am
off 10 : 10 am
off 10 : 10 am
4
off timer
on timer
power pos
Press the
Clock: The item allows you to set the local time on the TV.
Off timer: The item allows the TV automatically to switch
to standby mode when the preset time comes.
right/left to adjust value , up/down to adjust item
On timer: The item allows the TV automatically turns on
to a preset channel when preset time comes.
WINDOW ADJUST
1) Press the MENU button to enter the main menu.
[
]
[ or
[ or
[ or
[ or
[ or
]
]
]
]
]
2) Press the
3) Press the
4) Press the
Press the
button to select the item OPTION1, and press the
button to select window adjust.
button to enter window adjust menu.
button to select the item you want to adjust.
button to change the value.
button to enter OPTION1 menu.
window settings
zoom
fill all
Press the
h clipping
h position
v position
38
30
65
Zoom: The item allows you to switch the size of TV image between
fill all, 4:3 and user.
H clipping: The item allows you to extend or shorten the TV image
in the horizontal direction.
right/left to change image size.
H position: The item allows you to move the TV image in the
horizontal direction.
V position: The item allows you to move the TV image in the
vertical direction.
NOTE: 1)The itemzoom allows youto selectthe size of TVimage amongfill all, fill aspect and 1:1 in
AnalogRGB mode.
2) LCD-2000has not4:3 mode inzoom item.
-15-
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
Using the OPTION2 menu
powerd by
POLAROID
CCD setup
option2
You have two options with the closed caption feature:
captions or text. A caption is a printed version of the dialogue,
narration and/or sound effects of a TV program. Text is
information not related to what is appearing on the TV screen.
close caption mode
off
c.caption background
transparent
parental setup
4
4
source enable
down for option settings
CLOSE CAPTION MODE
1) Press the MENU button to enter the main menu.
[
]
button to enter OPTION2 menu.
[ or
[ or
[ or
]
]
]
2) Press the
3) Press the
4) Press the
button to select the item OPTION2, and press the
button to select close caption mode.
button to select your desired mode.
Note: By pressing the CCD button on the remote control, you can acquire the same effects.
C.CAPTION BACKGROUND
1) Press the MENU button to enter the main menu.
[
]
button to enter OPTION2 menu.
[ or
[ or
[ or
]
]
]
2) Press the
3) Press the
4) Press the
button to select the item OPTION2, and press the
button to select c.caption background.
button to change CCD background between transparent and opaque.
Parental setup
Parental enables parents to prevent their children from viewing certain programs or channels.
PARENTAL
1) Press the MENU button to enter the main menu.
2
5
8
0
3
6
9
+
1
4
7
-
powerd by
[ or
]
2) Press the
press the
button to select the item OPTION2, and
POLAROID
password
[
]
[ or
[ or
button to enter OPTION2 menu.
AA
enter
]
]
3) Press the
4) Press the
button to select parental setup.
button to enter parental setup menu.
Note: By pressing the PARENT button on the remote control,
down to enter password
you can acquire the same effects.
ENTER PASSWORD
2
3
1
4
7
-
5
8
0
6
9
+
powerd by
Password is a six-digit number. The preset password is 000000.
You must enter password to access the next three operations.
POLAROID
password
AA
enter
0 0 0 0 0 0
ok
[ or
]
1) Press the
button to select enter, and press the
button to enter enter .
[ or
[
]
up/down change digit , right/left select digit
[ or
button to select position, and press
]
]
2) Press the
button to input the digit.
-16-
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
[
]
3) After entering the password, press
the password.
button to select OK , then press OK button on the remote control to confirm
CHANGE PASSWORD
[
]
to enter change .
[ or
]
1) Press the
button to select change , and press the
2) Repeat steps 2) to 3) of ENTER PASSWORD.
2
3
1
4
7
-
5
8
0
6
9
+
powerd by
POLAROID
password
CLEAR PASSWORD DISPLAY
AA
AA
enter
change
clear
ok
0 0 0 0 0 0
[ or
]
1) Press the
2) Press the
button to select clear .
]
button to clear the password display .
[
TV RATING/MPAA RATING
right to enter the password
1) Press MENU button to return to parental setup.
[
]
[ or
]
2) Press the
3) Press the
button to select tv rating or mpaa rating, and press
[ or ] [ or
button to enter it.
]
button to select the rating, and press OK button to block or unblock the selected rating.
4) Press MENU button to return.
2
5
8
0
3
6
9
+
1
4
7
-
2
3
6
9
+
1
4
7
-
5
8
0
powerd by
powerd by
POLAROID
POLAROID
mpaa rating
tv rating
G
Y
PG
FV
Y7
G
PG
13
R
D
D
S
S
S
PG
14
L
L
L
V
V
V
NC
17
X
MA
<ok> to set tv block level , <menu> to return
<ok> to set mpaa block level , <menu> to return
Note:
As you block ratings, all ratings higher than the ones you select are blocked as well. For example, if you
choose to block the MPAArating R, the higher ratings, NC-17 and X, are automatically blocked too.
About TV Ratings
The TV ratings are divided into two groups: age-based and content-based.
Age
Defined as
Contents
Defined as
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
All children
Fantasy Violence
Suggestive dialogue
Strong language
FV
D
L
Directed to older children
General audience
Parental Guidance suggested
Parents Strongly cautioned
S
Sexual situations
Violence
V
Mature Audience only
-17-
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu operation
About MPAA Ratings
The Motion Picture Association ofAmerica(MPAA) uses a rating system to qualify motion picture content.
Television broadcasters employ a rating system to qualify the content of televison programs as well.
The MPAAand TV ratings work with the parental feature and allow you to block out programming above
the rating limits you determine.
Rating
G
Defined as
General audience
PG
Parental Guidance suggested
Parents stronglycautioned
PG-13
R
Restricted
No one 17 andunder admitted
NC-17
X
Adult audience only
SOURCE ENABLE/DISABLE
source enable / disable
Analog RGB
Composite video
S-Video
1) Press the MENU button to enter the main menu.
[ or
]
2) Press the
press the
button to select the item OPTION2, and
[
]
[ or
[ or
[ or
button to enter OPTION2 menu.
TV
]
]
]
3) Press the
4) Press the
5) Press the
button to select source enable .
button to enter source enable menu.
button to select source, press [
Component video
]
right to toggle enable , left to enable all
[
]
button to toggle enable, press
button to enable all .
-18-
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Cleaning and care
WARNING: TV sets use highvoltage. Donot tryto remove the cabinetback. Referservicing toqualified
service technicians.
To clean the TV screen:
1) Unplugthe TVto avoidpossible shockhazard.
2) Use a dampcloth orclean cellulose sponge toclean the TV screenand trim. Do notallow waterto spill
into the cabinet ordamage mayoccur.
3) Wipe off anyexcess moisture with a clean drycloth.
4)Polish the cabinet witha qualityfurniture polishto maintainthe finishand appearance of the cabinet.
Caution: Neveruse strongsolvents suchas thinner, benzene, or otherchemicals onor nearthe cabinet.
These chemicals can damage the finishof the cabinet.
Customer important notice
1. Whenthe TVcan notbe operatedin some special situation, please unplugthe powerand restart.
2. Displayinga stillpicture fora longtime willcause image sticking whenthe inputsignal is interlace. The
image stickingwill disappearwhen youturn offthe TVfor a moment.
We suggestdo notdisplay the still picture on the screen fora longtime whenthe inputsignal is interlace.
-19-
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Before callinga service technician, please check the following table for a possible cause of the problem and
some solutions.
Solution
Problem
Make sure the power cord is plugged in, then press POWER.
The remote control batteries may be dead. Replace the batteries.
TV will not turn on
No picture, no sound
Check the antenna/cable connections.
The sound may be muted. Press VOL+.
The station may have broadcast difficulties. Try another channel.
No sound, picture OK
Poor sound, picture OK
Poor picture, sound OK
Poor reception of broadcast channels
The station may have broadcast difficulties. Try another channel
Check the antenna connections.
The station may have broadcast difficulties. Try another channel.
Adjust the picture from the menu.
The station may have broadcast difficulties. Try another channel.
Check the antenna connections.
If you are using a VCR, make sure the TV/AV button is set correctly.
The channel may be deleted with the Add/Del feature.
Unable to select a certain channel
Multiple images
The station may have broadcast difficulties. Try another channel.
Use a highly directional outdoor antenna.
The station may have broadcast difficulties. Try another channel.
Adjust the TINT and COLOR in the menu.
If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn off the TV and
allow it to cool down for several hours before turning it on again.
Poor color or no color
Check to see if the TV/AV mode is properly set.
There may be an obstruction between the remote control and the
remote control sensor.
The remote control does not operate
The remote control batteries may be dead. Replace the batteries.
-20-
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
LCD-1700
17.1 INCHES TFT LCD
NTSC standard
LCD panel
Television system
Channel coverage
VHF: 2~13
UHF: 14-69
Cable TV: 2~13,A~W, W+1~W+84,
A-5~A-1, 4A
1280X768
Resolution
400:1
Contrast
450cd/m2
Brightness
176o(H)/176o(V)
English/French/Spanish
DC 12V , AC 100 - 240V ,47-63Hz
Viewing angles
OSD language
Power source
Power consumption
55W
1.5W+1.5W
50,000 hours
Audio power
Lamp life
RF input:
VIDEO input:
Cable/ antenna RF
1
1
VIDEO
1
S-VIDEO
1
Video/Audio
terminals
YPBPR/YCBCR
GRAPHIC input: Analog RGB 15pin
AUDIO input: AV audio
1
1
AUDIO output: MINI-JACK FOR STEREO (3.5
)
1
Width: 22-4/5inches
Height: 15-7/10inches
Depth: 10inches
Dimensions
Weight
22lbs
Supplied accessories
Remote control , Batteries , AC adapter , AC cord
Design and specifications are subject to change without notice.
-21-
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
LCD-2000
20.1 INCHES TFT LCD
NTSC standard
LCD panel
Television system
Channel coverage
VHF: 2~13
UHF: 14-69
Cable TV: 2~13,A~W, W+1~W+84,
A-5~A-1, 4A
640X480
Resolution
350:1
Contrast
450cd/m2
Brightness
176o(H)/176o(V)
English/French/Spanish
DC 12V , AC 100 - 240V ,47-63Hz
Viewing angles
OSD language
Power source
Power consumption
62W
1.5W+1.5W
50,000 hours
Audio power
Lamp life
RF input:
VIDEO input:
Cable/ antenna RF
1
1
VIDEO
1
S-VIDEO
1
Video/Audio
terminals
YPBPR/YCBCR
GRAPHIC input: Analog RGB 15pin
AUDIO input: AV audio
1
1
AUDIO output: MINI-JACK FOR STEREO (3.5
)
1
Width: 24-2/5inches
Height: 18-3/5inches
Depth: 10inches
Dimensions
Weight
26lbs
Supplied accessories
Remote control , Batteries , AC adapter , AC cord
Design and specifications are subject to change without notice.
-22-
Download from Www.Somanuals.com. All Manuals Search And Download.
|