32” LCD Television with NTSC/ATSC Tuner
FLM-3232
20060215
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Warnings and Precautions
To prevent any injuries, the following safety precautions should be observed in the installation, use,
servicing and maintenance of this equipment.
Before operating this equipment, please read this manual completely, and keep it nearby for future
reference.
This symbol is intended to alert the user to avoid the risk of electric shock.
This equipment must not be disassembled by anyone except qualified service personnel.
WARNING
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
CAUTION
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
▪
▪
▪
▪
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Use of controls, adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Important Safety Instructions
This symbol indicates caution points.
This symbol indicates actions that should not be done.
This symbol indicates actions that must be performed.
▪
▪
Do not place the equipment on any uneven or unstable carts, stands, tables, shelves etc.
The equipment may fall, causing serious injury to children or adults and serious damage
to the equipment itself.
Use only a cart or stand recommended by the manufacturer. This equipment and
recommended cart or stand should be handled with care. Quick stops, excessive force,
and uneven surfaces may cause the equipment and cart/stand to overturn.
▪
Do not disable the 3-wire grounding type plug. The grounding pin on the 3-prong plug is
an important feature. Removing the grounding pin will increase the risk of damaging the
equipment.
▪
▪
If you can not fit the plug into the electrical outlet, contact an electrician to install a
grounding outlet.
Always operate this equipment from the type of power source indicated on the rear of the
serial/model plate.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
▪
▪
Never overload wall outlets and extensions.
Use and handle the power cord with care. Do not place any heavy objects on the AC
power cord.
▪
Do not pull the AC power cord. Do not handle the AC power cord with a wet hand.
▪
▪
Do not touch the power cord and antenna cable during lightning.
Remove the plug from the wall outlet, if the equipment will not be used for a long period
of time.
▪
▪
Do not place, use or handle this equipment near water.
Never expose the equipment to liquid, rain, or moisture.
Seek for service if any of the above is spilled into the equipment.
▪
▪
Do not expose the equipment to extreme temperature or to direct sunlight, as the
equipment may heat up and suffer damage.
Do not install the equipment near any heat sources such as radiators, heat registers,
stoves, or any other apparatus that might produce heat.
▪
▪
Do not attempt to service the equipment yourself.
Opening and removing the covers may expose you to dangerous voltage or other
hazards and may void your warranty. Refer service to qualified personnel.
▪
▪
Do not place or drop any other objects on top.
Do not insert anything into the ventilation holes of your equipment.
Inserting any metal or flammable objects may result to fire or electric shock.
▪
▪
Do not place the equipment on uneven or unstable carts, stands, tables, shelves etc. The
equipment may fall, causing serious injury to children or adults and serious damage to
the equipment itself.
Always place the equipment on the floor or on a surface that is sturdy, level, stable and
strong enough to support the weight of the equipment.
Do not block any ventilating openings. Leave an open space around the equipment.
Never place the equipment :
on a bed, sofa, rug, or any other similar surfaces; too close to drapes/curtains/walls, in a
bookcase, built-in cabinet, or any other similar places that may cause poor ventilation.
▪
▪
Always remove the power cord from the outlet before cleaning the equipment.
Never use liquid or aerosol cleaners on the equipment.
Clean only with a soft dry cloth.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Outdoor Antenna Safety Instructions
If an outdoor antenna is connected, follow the precautions below:
▪
▪
An outdoor antenna should not be located in any area where it could come in contact with
overhead power lines, or any other electric light or power circuits.
When installing an outdoor antenna system, extreme caution should be taken to prevent
contact with power lines. Direct contact with power lines may be fatal and should be avoided
at all costs.
Section 810 of National Electrical Code (NEC) provides information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for
the grounding electrode.
Antenna lead-in wire
Ground clamps
Antenna discharge unit
(NEC section 810-20)
Electric service
equipment
Grounding conductors
(NEC section 810-20)
Ground clamps
Power service grounding
(NEC Art250 part H)
NEC : National Electrical code
EXAMPLE OF OUTDOOR ANTENNA GROUNDING
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Federal Communications Commission Statement.......................... 1
Warnings and Precautions
Important Safety Instructions....................................................................................... 2
Antenna Safety Instructions......................................................................................... 4
Chapter ꢀ Introducing the LCD TV
Key Features ............................................................................................................... 6
Package Contents ....................................................................................................... 7
Setting Up Your LCD TV.............................................................................................. 8
Your LCD TV.............................................................................................................. 10
Your Remote Control ................................................................................................. 12
Chapter ꢁ Installing the LCD TV
Connecting a TV Cable or an Antenna ...................................................................... 14
Connecting a VCR..................................................................................................... 18
Connecting a Video Camera or Play Station ............................................................. 19
Connecting a DVD Player.......................................................................................... 20
Connecting a Digital TV Cable Box or Digital Satellite Receiver ............................... 22
Connecting an AV Equipment with HDMI Connector................................................. 23
Connecting an AV Equipment with DVI Connector.................................................... 24
Connecting a PC........................................................................................................ 25
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System........................ 26
Chapter ꢂ USING THE FEATURES
Using Picture-In-Picture...................................................................................27
Wide Screen Viewing ......................................................................................29
Operating the Menu........................................................................................30
Setting up the HDTV Function..........................................................................32
Customizing the VIDEO Settings ......................................................................35
Customizing the AUDIO Settings ......................................................................36
Customizing the SETUP Settings......................................................................37
Using the V-CHIP Settings...............................................................................39
Using the Parental Settings..............................................................................41
Customizing the TV Settings............................................................................42
Specifications......................................................................................................... 43
Chapter 4 Programming your Remote Control
Introduction................................................................................................................ A
Programming a Device ............................................................................................. A
Troubleshooting ......................................................................................................... B
Manufacturer’s Codes ............................................................................................... C
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Chapter 1
Introducing the LCD TV
Key Features
Various Audio/Video terminals for external equipment connection
▪
▪
▪
▪
▪
▪
▪
▪
2 set of composite A/V input terminals
1 set of S-VIDEO terminals
2 set of component Video input terminals
1 VGA/ Audio input terminal
1 HDMI/Auido input terminal
1 sets of Audio(L/R) output terminals
2 SPDIF output terminal (Optical x 1 /Coaxial x 1)
1 Headphone terminal
The built-in TV tuner to receive HD ATSC
▪
This function allows the reception of HD broadcasting without the addition of a set top
box.
High Definition Multimedia Interface (HDMI)
▪
High Definition Multimedia Interface (HDMI) is a small, user-friendly interconnect that
can carry up to 5 Gbps of combined video and audio in a single cable. This system
eliminates the cost, complexity and confusion of multiple cables used to connect
current A/V systems.
HDTV Component Video Inputs
▪
Offers the best video quality for DVD(480p) and digital set-top-box (HD1080i, 720p)
connections.
ꢂD Digital Noise Reduction
This function can digitally reduce image noise to provide better picture quality.
▪
Film-Mode Detection (ꢂ:ꢁ Reverse Pull Down)
▪
This function can automatically detect content derived from film and adjust the
interlacer’s frame matching to provide a more natural-looking, clearer image of the
moving picture.
PIP Function
Provides viewing of two programs simultaneously, in either picture-in-picture mode or
picture-on-picture (side by side) mode.
▪
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Package Contents
Make sure all of the following contents are included.
LCD TV
Bottom Stand /
Screw Driver and 6 Screws
Component Cable
Remote Control/
AA Batteries x 2
VIDEO Cable
Power Cord
AUDIO Cable
Warranty Card
Quick Start Guide
User’s Manual
These items are all you need to set up and operate the LCD TV in its basic configuration.
Make sure all of the above contents are included in the package. If you are missing
any items, please contact the Polaroid customer service department.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Setting Up Your LCD TV
Attach the Stand
If you prefer to mount your new Polaroid TV on a wall instead of attaching it to the stand, please reference
the instructions included in the wall mounting kit (not included).
IMPORTANT: Attach the Stand to the TV with the bottom foam packaging material still attached.
Read all instructions before continuing with the stand installation.
a) Lift foam packaging material from the top of the TV out of the box.
b) Lift TV out of box, with the bottom foam packaging material still attached, and place onto a stable surface.
Shipping Box
Stand
Table
Packaging Material
c) Remove the protective bag from the LCD unit, but DO NOT remove the bottom foam packaging material.
d) Locate the place on the back of the TV to attach the stand. Secure the stand to the LCD with all six screws.
Unit
Table
Screws (6)
Stand
Table
Unit
Stand
Packaging
Material
Packaging
Material
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal
(refer to page17).
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Insert the 2 batteries supplied in remote control.
Stepꢀ Slide the back cover up to open the
battery compartment of the remote
control.
Stepꢁ Insert two AA size batteries.
Make sure to match the (+) and
( - ) ends of the batteries with
the (+) and ( - ) ends indicated
in the battery compartment.
Slide the cover back into place.
Do not use caustic cleaners (porcelain, stainless steel, toilet, or oven cleaner
etc.) on the remote, as it may suffer damage.
Connect other an external A/V device (refer to page14-26).
ꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introducing the LCD TV
Your LCD TV
Front/Right Side View and Controls
LED
The LED light indicates when the LCD TV is
activated.
IR
Infrared
Receiver
VOLUME▲▼
Adjusts the volume up and down.
Selects the main-menu item and change
values for items when in the OSD mode.
VIDEO1 IN
Connects to the composite
Video and Audio output jacks
on external video equipment.
VIDEO
AUDIO
L
R
CHANNEL▲▼
VIDEO1 IN
Scans up and down through channels.
Selects sub-menu item when in the OSD
mode.
EARPHONE
MENU
Connects to the external
headhone for private
listening.
Press once to display the OSD (on screen
display), press again to turn the OSD off.
INPUT
Chooses from different input signal sources.
Turns the LCD TV on and into standby mode.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Rear View and Jacks
VIDEOꢁ IN
Connects to the composite VIDEO and AUDIO(L/R) output jacks on external video equipment.
HDMI IN
Connects the all digital AV equipment with HDMI connector.HDMI supports enhanced,
high-definition video and two-channel digital audio. The AUDIO(L/R) of HDMI IN is for
DVI connection.
S-VIDEO IN
Connects to the S-VIDEO and AUDIO(L/R) output jacks on external
video equipment.
VGA IN
Connects the PC, or other AV equipment with VGA and
AUDIO(L/R) output jacks.
HDMI IN
VGA IN
AUDIO OUT
YPbPrꢀ IN
DIGITAL
STEREO
AUDIO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
YPbPrꢀ IN/YPbPrꢁ IN
Connects to the DVD player, Digital Set-Top-Box, or other AV
equipment with component(YPbPr) video and audio output jacks.
AUDIO OUT-STEREO
Connects to the AUDIO(L/R) input jacks on AV equipment.
AUDIO OUT-DIGITAL-OPTICAL/COAXIAL
Connects to the OPTICAL AUDIO jack on the digital/standard 5.1
audio system.
VHF/UHF IN-TV-CABLE
Connects RF input from VHF/UHF antenna or cable.
VHF/UHF IN-HDTV-AIR
Connects RF input from VHF/UHF antenna or cable
to receive high/standard definition television.
AC IN
Connects to the AC power cord.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢀ Introducing the LCD TV
Your Remote Control
This package includes a Polaroid remote that enables control of up to four devices.
To select a device, simply select one of the following device mode controls: TV, CBL/SAT, DVD/VCR,
or AUDIO.
Turns the LCD TV on and off.
ꢀ
ꢁ
ꢁ
ꢂ
ꢀ
ꢃ
SET
Remote control universa code setup.For
more information on setting up your
remote control, please see the
“Programming Your Remote Control”
section.
ꢄ
TV
Controls this LCD TV.
ꢂ
ꢅ
ꢆ
DVD
CBL
Controls DVD player or Video player.
ꢃ
Controls Cable Converter or Satellite
Receiver.
ꢇ
ꢈ
ꢀ0
AUX
Controls Audio Amplifier
ꢄ
0-ꢈ/ENTER Pressing a number selects a channel.
Following selection, pressing ENTER
activates the channel, or channel
activates automatically in 3 seconds.
ꢅ
INPUT
Pressing INPUT to display a source list,
use ▲▼buttons to select the video
equipment connected to the video inputs
of your LCD TV: TV/HDTV/VIDEO1/
VIDEO2/VIDEO3/VIDEO4/VIDEO5/
VIDEO6/COMPUTER.
▪
In HDTV mode, use with 0-9 and
ENTER buttons to select a digital
channels.
LAST
CH+-
Returns to previously selected channel.
Change channel up and down.
ꢆ
ꢇ
VOL+-
MUTE
Increases and decreases volume.
ꢈ
ꢀ0
Pressing once mutes audio. Pressing
again restores audio.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
ꢀꢀ
MENU
Displays the OSD menu on the screen.
ꢀꢁ INFO
Pressing once displays a variety of
information such as the current channel
and the input source.
ꢀꢂ
ꢀꢃ
▲▼►◄,OK Cycles through OSD options and selects
individual menu items. OK confirms
option settings.
OK
In HDTV mode, pressing OK to display a
digital channel list.
GUIDE
In HDTV mode, pressing GUIDE
displays the Program Guide on the
screen.
ꢀꢄ
ꢀꢅ
EXIT
Exits the OSD menu.
ꢀꢁ
ꢀꢂ
ꢀꢄ
ꢀꢀ
ꢀꢃ
► Other device function keys
ꢀꢆ
ꢀꢇ
SLEEP
Cycles through the LCD TV sleep time:
OFF/30/60/90/120 mins.
CAPTION Cycles through the Closed Caption:
OFF/CC1/CC2/CC3/CC4/TT1/TT2/TT3/
TT4.
ꢀꢅ
ꢀꢆ
ꢀꢇ
ASPECT
PIP
Cycles through Wide mode settings:
NORMAL/FULL/WIDE/ZOOM.
ꢀꢈ
ꢁ0
ꢀꢈ
ꢁ0
Turns PIP/POP on and off.
Effective range:
The remote can control the LCD TV from up to ꢄm away, if pointed directly at the receiver.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Chapter 2
Installing the LCD TV
Refer to the owner’s manual of any external equipment to be connected.
When connecting any external equipment, do not connect any AC power cords to wall outlets
until all other connections are completed.
Connecting a TV Cable or an Antenna
Antenna Connection
The antenna requirements for good color TV reception are more important than those for a black &
white TV reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connection that is provided with the various antenna
systems.
■
A ꢆꢄ-ohm system is generally a round cable (not included) with F-
type connector that can easily be attached to a terminal without
tools.
F-type connector
ꢆꢄ-ohm coaxial cable (round)
■
A ꢂ00-ohm system is a flat twin-lead cable (not included) that can
be attached to a ꢆꢄ-ohm terminal through a ꢂ00-ꢆꢄ-ohm adapter
(not included).
ꢂ00-ohm twin-lead cable (flat)
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Use one of the following two diagrams when connecting an outdoor antenna.
A: Shows how to use a VHF/UHF combination outdoor antenna.
B: Shows how to use a separate VHF and/or UHF outdoor antenna.
A. Combination VHF/UHF antenna
VHF/UHF
Antenna
300/75-ohm adapter
(not included)
VHF/UHF
Antenna
300-ohm twin-
lead cable
75-ohm
coaxial cable
B. Separate VHF and/or UHF antennas
UHF
Antenna
Combiner
(not included)
300-ohm twin-
lead cable
IN
OUT
75-ohm
coaxial cable
VHF
Antenna
300-ohm twin-
lead cable
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Cable TV (CATV) Connection
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the
National Electrical Code (NEC) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding system of the building
accurately, or as close to the point of cable entry as possible. Use of this TV for other than
private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for
the use of the general public may require authorization from the broadcast/cable company, and/
or program owner.
■
■
A ꢆꢄ-ohm coaxial cable connector is built into the set for easy hookup.
When connecting the ꢆꢄ-ohm coaxial cable to the set, connect the ꢆꢄ-
ohm cable into the ANT. terminal.
Some cable TV companies offer premium pay channels. Since the
signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the
cable TV company.
This converter/descrambler is necessary for normal viewing of scrambled channels.
(Set your TV to channel 3 or 4, typically one of these channels is used. If this is unknown,
consult your cable TV company.)
For more specific instructions on installing cable TV, consult your cable TV company.
One possible method of connecting the coverter/descrambler provided by your cable TV
company is shown in the diagram below.
RF switch
(not included)
2 set signal
splitter
(not included)
A
IN
B
Cable TV Line
OUT
Cable TV converter/
descrambler
VHF/UHF IN
(not included)
■ The RF switch (not included) is required to provide two inputs (A and B). Setting
the RF switch to position A allows viewing of all unscrambled channels by using
the TV channel keys.
■
Setting the RF switch to position B allows viewing of all scrambled channels via
the converter/descrambler by using the converter channel keys.
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
METHOD A:
Use a supplied antenna cable to connect the NTSC signal to the LCD TV’s TV CABLE
terminal.
TV
CABLE
HDTV
AIR
VHF/UHF IN
B
A
METHOD B:
Use a supplied antenna cable to connect the ATSC signal to the LCD TV’s
HDTV AIR terminal.
Connect the AC power cord at the back of the TV and connect the power cord to wall
outlet.
TV
CABLE
HDTV
AIR
VHF/UHF IN
Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will
not be used for a long period of time. The POWER button on the front panel
is only used for switching the LCD TV into standby, it does not disconnect
the device from the main voltage. To completely disconnect the main
voltage, please remove the power plug from the socket.
Press the Input button on the remote to
display the Input List. Use the ▲► buttons to
Input
TV(CABLE/AIR)
HDTV (CABLE/AIR)
VIDEOꢀ (SIDE)
select TV( METHOD A), or HDTV (METHOD
B), and press the OK button.
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
VIDEOꢅ (HDMI)
COMPUTER (VGA)
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a VCR
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO I
VIDEOꢁ IN
AUDIO Cable
S-VIDEO Cable
AV Cable
A
B
METHOD A:
Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s
VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio
inputs. Use a S-Video cable to connect the VCR’s s-video output jack to the LCD TV’s
S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a videotape, press the Input button on the remote to select
VIDEOꢁ( METHOD A), or VIDEOꢂ (METHOD B).
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Installing the LCD TV
Connecting a Video Camera or Play Station
Rear of TV
Right Side
HDMI IN
VGA IN
AUDIO
AUDIO OUT
VIDEO
AUDIO
YPbPr1 IN
Pr
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
R
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VIDEO1 IN
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPr2 IN
S-VIDEO I
VIDEO2 IN
AUDIO Cable
or
S-VIDEO Cable
PLAY STATION
B
A
AV Cable
METHOD A:
Use a composite cable to connect the video camera’s or play station’s composite video/
audio jacks to the LCD TV’s VIDEO2 IN jacks or VIDEO1 IN jacks.
METHOD B:
Use an audio cable to connect the video camera’s or play station’s audio output jacks to
the LCD TV’s audio inputs. Use a S-Video cable to connect the video camera’s or play
station’s s-video output jack to the LCD TV’s S-VIDEO IN input jack.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a video vis camera or play station, press the Input button on the remote to
select VIDEO2/VIDEO1( METHOD A), or VIDEO3 (METHOD B).
Not all cameras have the ability to connect to a TV. Please check your video camera
user guide for compatibility.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a DVD Player
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
or
Pb Pr
COMPONENT/AUDIO Cable
AUDIO Cable
S-VIDEO Cable
AV Cable
Pb Pr
A
B
C
DVD PLAYER
METHOD A:
Use a composite cable to connect the DVD player’s composite video/audio jacks to the LCD
TV’s VIDEO2 IN jacks.
METHOD B:
Use an audio cable to connect the DVD player’s audio output jacks to the LCD TV’s
audio inputs. Use a S-Video cable to connect the DVD player’s s-video output jack to the
LCD TV’s S-VIDEO IN input jack.
METHOD C:
Use a component cable to connect the DVD player’s component output jacks to the LCD TV’s
YPbPr1 IN or YPbPr2 IN input jacks.
Use an audio cable to connect the DVD player’s component audio jacks to the LCD TV’s
audio input jacks.
The component video jacks on your DVD player are sometimes labeled
YPbPr, or YCbCr. For an explanation of component video, see your DVD
player’s user guide.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch a DVD, press the Input button on the remote to select
VIDEOꢁ( METHOD A), or VIDEOꢂ ( METHOD B), or VIDEOꢃ/VIDEOꢄ (METHOD C).
For best picture quality, if your equipment has component video output, use
a component cable instead of a composite video or S-video cable.
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting a Digital TV Cable Box or Digital Satellite Receiver
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
or
Pb Pr
COMPONENT/AUDIO Cable
Pb Pr
Use a component cable to connect the satellite receiver’s/TV Cable Box’s component
(YPbPr1) output jacks to the LCD TV’s component input jacks.
Use an audio cable to connect the satellite receiver’s/TV Cable Box’s component audio
jacks to the LCD TV’s audio input jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
To watch programs via satellite receiver or TV Cable Box, press the Input button on the
remote to select VIDEOꢃ/VIDEOꢄ.
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting an AV Equipment with HDMI Connector
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
YPbPrꢀ IN
Pr
DIGITAL
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
HDMI Cable
AV EQUIPMENT
Use a HDMI cable to connect the AV equipment’s HDMI output jack to the LCD TV’s HDMI IN
jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to select VIDEOꢅ.
The HDMI connector provides both video and audio signals, it’s not
necessary to connect the audio cable.
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢁ Installing the LCD TV
Connecting an AV Equipment with DVI Connector
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
AUDIO
L
R
DVI IN
HDMI-to-DVI Cable
AV EQUIPMENT
Use a HDMI-to-DVI cable to connect the AV equipment’s DVI output jack to the LCD TV’s
HDMI IN jacks.
Use an audio cable to connect the AV equipment’s audio output jacks to LCD TV’s HDMI
AUDIO jacks.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to select VIDEOꢅ.
If the LCD TV is connected to AV equipment’s DVI connector, you will need
an HDMI-to-DVI cable or an HDMI adapter(not suplied).
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Connecting a PC
Rear of TV
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
STEREO
AUDIO
Y
Y
Pb
Pb
Pr
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
L
COAXIAL
Pr
VHF/UHF IN
R
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
VGA Cable
PC
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input
jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
Press the Input button on the remote to select COMPUTER.
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Connecting an Audio Receiver or a Dolby Digital 5.1 Sound System
For better sound quality, you may want to play the LCD TV audio through your stereo system.
HDMI IN
VGA IN
AUDIO
AUDIO OUT
DIGITAL
YPbPrꢀ IN
Pr
STEREO
AUDIO
Y
Y
Pb
Pb
AUDIO
AUDIO
OPTICAL
TV
CABLE
HDTV
AIR
L
L
R
R
L
L
R
R
L
L
R
R
L
COAXIAL
Pr
VHF/UHF IN
R
VIDEO
AUDIO
S-VIDEO
AUDIO
YPbPrꢁ IN
S-VIDEO IN
VIDEOꢁ IN
AUDIO Cable
B
A
Audio Receiver
Audio Amplifier
Connecting to Audio Receiver:
Use an audio cable to connect the audio receiver’s audio LINE IN jacks to LCD TV’s
AUDIO OUT jacks.
Connecting to Digital ꢄ.ꢀ Sound System:
METHOD A:
Use an optical cable to connect the audio amplifier’s OPTICAL IN jacks to LCD TV’s
OPTICAL OUT jacks.
METHOD B:
Use a coaxial cable to connect the audio amplifier’s COAXIAL IN jacks to LCD TV’s
COAXIAL OUT jacks.
Note: Above mentioned function is only available under HDTV (cable/air) mode.
Connect all AC power sources, before turning on the power switch of the LCD TV or
other connected equipment.
Press the button on the remote to turn on the LCD TV.
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Chapter 3
USING THE FEATURES
Using Picture-In-Picture
The PIP/POP feature allows simultaneous viewing of video from two sources (TV, VCR, DVD etc).
Only one source’s audio is played at a time; the user may select which source’s audio is heard.
Press the PIP button once to enter picture in picture mode.
Main
Sub
▪ Press ◄ ► to toggle the audio source between the main window and
the sub window.
▪ Press the OK button to change the position of the second window.
SUB MAIN
ꢀ
ꢁ
ꢂ
ꢄ
ꢃ
▪ Press ◄ ► to activate either the main or sub window, then press the Input
button to display the Input List:
Sub
TV(CABLE/AIR)
VIDEOꢀ (SIDE)
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
COMPUTER (VGA)
▪ Press ▲▼ to change input source and press the OK button.
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Press the PIP button again to view images side by side.
Main
Sub
▪ Press ◄ ► to toggle the audio source between the main window and the sub window.
▪ Press the OK button to swap the pictures between the main and sub windows.
▪ Press ◄ ► to activate either the main or sub window, then press the Input button to
display the Input List:
Sub
TV(CABLE/AIR)
VIDEOꢀ (SIDE)
VIDEOꢁ (REAR)
VIDEOꢂ (S-VIDEO)
VIDEOꢃ (YPbPrꢀ)
VIDEOꢄ (YPbPrꢁ)
COMPUTER (VGA)
Press ▲▼ to change input source and press the OK button.
Press the PIP button again to exit.
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Wide Screen Viewing
Wide Screen function allows viewing of 4:3/16:9 images in wide screen mode, cycling through
the following wide screen settings. Press the ASPECT button repeatedly to select the screen
format you want.
NORMAL
Displays at 4:3 aspect ratio.
FULL
Stretches the image vertically and
horizontally to keeps the image size
consistent in the center of the screen and
stretches the sides
WIDE
Stretches the image vertically and
horizontally to fill the screen at 1:1.85
aspect ratio.
ZOOM
Stretches the image vertically and
horizontally to fill the screen at 1:2.35
aspect ratio.
ꢁꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Operating the Menu
Press the button to turn the LCD TV on.
Press the MENU button on the remote control,the on-screen menu will appear on the
screen. Use the ◄► buttons to select your main menu option.
VIDEO MENU:
Allows you to make adjustments to your picture settings.
▪
If the signal source is VGA, the VIDEO MENU
appears as:
▪
If the signal source is TV/HDTV/VIDOE/SVIDEO/
YPbPr/HDMI, the VIDEO MENU appears as:
Picture Mode
Contrast
Vivid
ꢆꢄ
Picture Mode
Contrast
Vivid
ꢆꢄ
Brightness
ꢅꢄ
Brightness
Saturation
Hue
ꢄꢄ
Auto Setting
Phase
ꢅꢁ
ꢁ0
+ꢁꢁ
ꢃ
Manual Clock
Display Adjustment
Color Temperature
ꢀꢁꢇ
Sharpness
Color Temperature
Nature
Nature
Video
Select
Exit
Video
Select
Exit
AUDIO MENU:
Allows you to customize the audio options and effects.
▪
If the signal source is VIDOE/SVIDEO/YPbPr/
HDMI/VGA, the AUDIO MENU appears as:
▪
If the signal source is TV, the AUDIO MENU
appears as:
Bass
ꢄ0
ꢄ0
Bass
ꢄ0
ꢄ0
0
Treble
Treble
Balance
Sound Effect
MTS System
0
Balance
Sound Effect
Off
Off
Stereo
Audio
Select
Exit
Audio
Select
Exit
▪
If the signal source is HDTV, the AUDIO MENU appears as:
Bass
ꢄ0
ꢄ0
0
Treble
Balance
Sound Effect
Off
Audio
Select
Exit
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
SETUP MENU:
Allows you to set up a variety of features: Language, Closed Caption, factory reset, V-Chip, Parental Control
sleep timer.
Language
Timer
English
ꢀꢄ
Closed Caption
V-Chip
off
Parental
Default
Setup
Select
Exit
TV MENU:
Allows you to edit and label channels.
Searching
Tuner Mode
Channel Skip
Channel Name
Cable-STD
On
TV
Select
Exit
HDTV MENU:
Allows you to set up the HDTV program function.
Audio Language
Time Zone
◄
English
►
Eastern Time
PCM
SPDIF Type
Auto Scan
Scan
Manual Scan
Channel Skip
Channel Block
Caption
Press<Enter>
Press<Enter>
Press<Enter>
Press<Enter>
HDTV
Select
Exit
Use the ▲▼ buttons to select an option of the sub-menu, and press the OK button. While in
adjustment mode, and use the ◄► buttons to change the value of the item.
Press the MENU button to exit the menu.
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Setting up the HDTV Function
Automatically scans and stores all the TV channels
With the LCD TV connected to a television programming source, press the TV button
on the remote control.
Press the MENU button on the remote control to display the Main menu, and use
the ◄► buttons to select the HDTV.
Audio Language
Time Zone
◄
English
►
Eastern Time
PCM
SPDIF Type
Auto Scan
Scan
Manual Scan
Channel Skip
Channel Block
Caption
Press<Enter>
Press<Enter>
Press<Enter>
Press<Enter>
HDTV
Select
Exit
Press the ▼ button to select Auto Scan, and press the OK button. The Auto Scan
automatically creates a list of receivable channels. Press the MENU button at any time to
interrupt the memorization process.(the list cannot be created if interrupted)
Status: Scanning..
Channels Found: ꢁ
HDTV
Cancel
Press the OK button to display the received channel list, then press ▲▼the buttons to
select a channel. Or, use the ▪ (Input button) with 0-ꢈ buttons to select digital channel( for
example 9.1)
Channel List
ꢈ-ꢀ KQED-HD
ꢈ-ꢁ KOED-SD
The digital main channel might include many subchannels (for example
ꢈ-ꢀ, ꢈ-ꢁ..) that are showing program at the same time.
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
The HDTV menu includes the following options:
Audio Language
Time Zone
Allows to select the audio language:
English/Spanish/French.
Allows selection of regional TV systems of USA: Eastern Time/Indiana/
Central time/Mountain Time/Arizona/Pacific Time/Alaska/Hawaii
SPDIF Type
Allows to selection of the digital sound format: PCM/OFF/Dolby Digital
Auto Scan
Automatically sets up channel list on TV for all receivable channels.
Allows to set up TV channel manually.
Manual Scan
Channel Skip
Channel Block
Allows addition/removal of digital channels.
Allows to block digital channels.
Use the Channel Block function, must enter a four-digit password. The
factory password is 0000.
Caption
Allows to set closed caption:
Analog Closed Caption
Digital Closed Caption
Caption Style
◄
OFF
OFF
►
HDTV
Select
Back
▪
▪
Analog Closed Caption:
Allows to set basic analog closed caption options:OFF/CC1/CC2/CC3/CC4
Digital Closed Caption:
Allows to set digital closed caption options:Service1/Service2/Service3/
Service4/Service5/Service6/OFF
▪
Caption Style:
Allows to customize the settings for digital closed caption option:
Caption Style
Font Size
◄
Custom
Large
►
Font Color
White
Font Opacity
Solid
Background Color
Background Opacity
Window Color
Window Opacity
Black
Solid
Black
Translucent
HDTV
Select
Back
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the Program Guide
The Program Guide feature brings all sorts of information provided by the cable TV
company to your screen, such as program title, program duration, time remaining, rating
information, closed caption, availability, etc.
With the LCD TV connected to a television programming source, press the TV button on the
remote control.
Press the GUIDE button on the remote control, the Program Guide will appear on the
screen:
Monday ꢁꢈ April ꢁ00ꢄ ꢁ:ꢂꢅ:ꢁꢅ PM
ꢈ-ꢀ ◄
ꢄ:00 PM
ꢄ:ꢂ0 PM
ꢅ:00 PM
ꢆ:ꢂ0 PM
ꢆ:ꢂ0 PM
ꢀꢀ:00 PM
ꢈ-ꢁ KQED-SD
Calfornia’s Gold
Antiques Roadshow
The NewHour with Jim Lehrer
Zoboomafoo
► ꢈ-ꢀ
Today
Today
Today
Today
Today
Today
CC
CC
CC
Arthur
Antiques Roadshow
CC
ꢄ:00 PM - ꢄ:ꢂ0 PM Mon, ꢁꢈ Apr
Not Rated
Clubs: Dongwa doesn’t communicate with his parents.
Eplisode: Explorer’s club/Time for everything
ꢈ - ꢁ KOED-SD
Press the ▲▼ button to select the program from a list, the Program Guide provides
introduction about the current program being shown on each channel.
Monday ꢁꢈ April ꢁ00ꢄ ꢁ:ꢂꢅ:ꢁꢅ PM
ꢈ-ꢀ ◄
ꢄ:00 PM
ꢄ:ꢂ0 PM
ꢅ:00 PM
ꢆ:ꢂ0 PM
ꢆ:ꢂ0 PM
ꢀꢀ:00 PM
ꢈ-ꢁ KQED-SD
Calfornia’s Gold
Antiques Roadshow
The NewHour with Jim Lehrer
Zoboomafoo
► ꢈ-ꢀ
Today
Today
Today
Today
Today
Today
CC
CC
CC
Arthur
Antiques Roadshow
CC
ꢄ:00 PM - ꢄ:ꢂ0 PM Mon, ꢁꢈ Apr
Not Rated
Clubs: Dongwa doesn’t communicate with his parents.
Eplisode: Explorer’s club/Time for everything
ꢈ - ꢁ KOED-SD
Press the GUIDE button again on the remote control to exit the Program Guide
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the VIDEO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the VIDEO.
Use the ▲▼buttons to highlight an individual VIDEO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
Picture Mode
Contrast
Vivid
ꢆꢄ
Brightness
Saturation
Hue
ꢄꢄ
ꢅꢁ
+ꢁꢁ
ꢃ
Sharpness
Color Temperature
Nature
Video
Select
Exit
The VIDEO menu includes the following options:
Picture Mode
Contrast
Cycles among display types: Vivid/Hi-Bright/Cinema/Sport/User
Controls the difference between the brightest and darkest regions of the
picture.
Brightness
Saturation
Hue
Controls the overall brightness of the picture.
Controls the color intensity.
Controls the difference between the green and red regions of the
picture.
Sharpness
Color temperature
Increase this setting to see crisp edges in the picture; decrease it for
soft edges.
Adjusts color components independently to achieve a warm or cool
effect: Cool/Middle/Warm/User
▪ Warm: Increases red tint
▪ Nature: Increases natural tint
▪ Cool: Increases blue tint
▪ User: Allows the user to adjust red, green and blue color
component levels independently.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the AUDIO Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the AUDIO.
Use the ▲▼buttons to highlight an individual AUDIO option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu
Bass
ꢄ0
ꢄ0
Treble
Balance
Sound Effect
MTS System
0
Off
Stereo
Video
Select
Exit
The AUDIO menu includes the following options:
Bass
Controls the relative intensity of lower-pitched sounds.
Treble
Balance
Controls the relative intensity of higher pitched sounds.
Adjusts the relative volume of the speakers in a multiple speaker
system.
Sound Effect
MTS System
Allows selection of an audio-enhancement technique from among the
following options: Surround/Live/Dance/Techno/Classic/Soft/Rock/POP/
Off.
Allows you to listen to high-fidelity stereo sound while watching TV.
▪ Stereo:
Use separate audio tracks for left and right speakers, if available.
▪ SAP:
You can enjoy a second audio program from the speakers while
watching a scene in the original program.
▪ Mono:
Allows mono output (useful when stereo is noisy or inconsistent).
ꢂꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the SETUP Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the SETUP.
Use the ▲▼buttons to highlight an individual SETUP option, use the ◄► buttons to
change the setting, and press the MENU to exit the menu.
Language
Timer
English
ꢀꢄ
Closed Caption
V-Chip
off
Parental
Default
Video
Select
Exit
The SETUP menu includes the following options:
Language
Timer
Selects to display all on-screen menus in your language of choice:
English/Trandition Chinese/Simplified Chinese/French/Spanish.
Allows to set up clock and to program the TV to turn on and off and tune
to a specific channel.
▪ Time:
Selects to set the current time by hour, minute, second.
▪ Start Time:
Selects to set the time that you want the TV to turn on.
▪ Stop Time:
Selects to set the time that you want the TV to turn off.
▪ Channel:
Selects to set the specific channel that you want the TV to tune.
▪ Activate:
Selects to turn on/off/once the timer.
▪ Confirm:
Selects to confirm.
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Closed Caption
Allows to select from 4 closed caption modes:
▪ CCꢀ /CCꢁ /CCꢂ /CCꢃ:
Display a printed version of the dialog and sound effects of the
program being viewed.
▪ Tꢀ/Tꢁ:
Display station information presented using either half or the whole
screen.
▪ Tꢂ/Tꢃ:
Extended Data Services. For example: Network name, program
name, program length, etc.
V-Chip
Allows to setup the TV and MPAA Rating Lock options(refer to “Using the
V-CHIP Setting”).
Parental
Default
Allows to setup the Parental Lock options.
Restores factory settings.
ꢂꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the V-CHIP Settings
The US has 2 rating system for viewing content: Movie blocking(MPAA) and TV Blocking.
The TV Blocking conjuncts with the V-CHIP to help parents block inappropriate programs from their
children.
The Movie blocking(MPAA) is used for original movies rated by the Motion Picture Association of
America(MPAA) as broadcasted on cable TV and not edited for television.
The V-CHIP can also be set to block MPAA-rated movies.
Use the ▼ button to select the V-Chip, and press the OK to display the V-Chip menu.
Block MPAA Rating
Block TV Rating
Block MPAA Unrated
Block TV None Rating
No
No
Setup
Select
Exit
Use the V-CHIP function, must enter a four-digit password. The factory password is
0000.
Inout Your Password Please
* * * *
OK
Cancel
The MPAA includes the following options:
RATING
G
DESCRIPTION
General Audiences. Movie is appropriate for all ages.
PG
Parental Guidance Suggested. May contain material not suited for younger
viewers
PG-ꢀꢂ
R
Contains content that may not be appropriate for viewers under the age of 13.
Restricted. Contains adult content, no one under 17 admitted without parent.
No one 17 and under admitted.
NC-ꢀꢆ
X
No one 17 and under admitted.
Use the ▲▼ buttons to select the rating you want and press the OK button repeatedly to select
BLOCK() or UNBLOCK().
ꢂꢈ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
The TV GUIDELINE has 2 rating methods: Content-Based Rating and Age-Based Rating.
The TV GUIDELINE includes the following options:
AGE-BASED
CONTENT-BASED
RATING
TV-Y
DESCRIPTION
RATING
DESCRIPTION
All children
FV
D
L
Fantasy violence
Suggestive dialogue
Strong language
Sexual situations
Violence
TV-Yꢆ
TV-G
Directed to children age 7 and older
General Audience
TV-PG
TV-ꢀꢃ
TV-MA
Parental Guidance suggested
Parents strongly cautioned
Mature Audience only
S
V
CONTENT-BASED
L
FV
D
S
V
TV-Y
TV-Yꢆ
TV-G
TV-PG
TV-ꢀꢃ
TV-MA
: To block programs by both content and age.
Use the ▲▼ buttons to select the rating you want and press the OK button repeatedly to select
BLOCK() or UNBLOCK().
The V-CHIP menu includes the following options:
Block MPAA Rating Selects to activate the MPAA Rating programs
Block TV Rating
Selects to activate the TV Rating programs.
Block MPAA Unrated ▪ YES:
Block all movies that are broadcast without a MPAA rating.
▪ NO:
Allows all movies that are broadcast without a MPAA rating
Block TV None Rating ▪ YES:
Block all movies that are broadcast without a TV rating.
▪ NO:
Allows all movies that are broadcast without a TV rating.
ꢃ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Using the Parental Settings
The Parental blocking can be set up to the TV to block a Channel or a Video Source.
Use the ▼ button to select the Parental, and press the OK to display the Parental
menu.
Channel Lock
Video Lock
ꢀ
VIDEOꢄ(YPbPrꢁ)
Change Password
Setup
Select
Exit
Use the V-CHIP function, must enter a four-digit password. The factory password is
0000.
Inout Your Password Please
* * * *
OK
Cancel
You need your password for any future access into the V-Chip and
Parental Setting,
The Parental menu includes the following options:
Channel Lock
Video Lock
Selects to block a TV channel.
Selects to block a Input source signal.
Selects to change your password.
Change Password
ꢃꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter ꢂ Using the LCD TV
Customizing the TV Settings
Press the button to turn the LCD TV on.
Press the MENU button on the remote control to display the Main menu, and use the
◄► buttons to select the TV.
Use the ▲▼buttons to highlight an individual TV option, use the ◄► buttons
changes the setting, and press the MENU exits the menu.
Searching
Tuner Mode
Cable-STD
On
Channel Skip
Channel Name
TV
Select
Exit
The TV menu includes the following options:
Searching
Automatically sets up channel list on TV for all receivable channels.
Tuner Mode
Allows selection between CATV cable and antenna signal sources:
▪
ANTENNA
Choose this setting if you are receiving TV channels with an antenna
cable.
▪
CABLE STD/CABLE IRC/CABLE HRC
Choose this setting if you are receiving TV channels with a CATV
cable.
Channel Skip
Allows addition/removal of channels on the channel list.
Allows channel labels to be edited.
Channel Name
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
SPECIFICATIONS
MODEL
FLM-2632/FLM-263B
FLM-3232/FLM-323B
LCD Panel
Panel Size
26’’ TFT LCD
32’’ TFT LCD
Brightness
550
500
Contrast Ratio
1000:1
800:1
Max. Resolution
1366x768
1366x768
Input Connector VIDEO/AUDIO(L/R)
S-VIDEO/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
OPTICAL/COAXIAL
HEADPHONE
2
1
2
1
1
1
1
1
2
1
2
1
1
1
1
1
Power Source
AC100~240V, 50/60HZ, 2.2A AC100~240V, 50/60HZ, 2.2A
180 W, standby < 5 W 180 W, standby < 5 W
26.7 w x 22.1 h x 7.9 d inch 31.7 w x 25.0 h x 8.4 d inch
31.97 LB 39.5 LB
Power Consumption
Dimension
WEIGHT
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
MODEL
Panel Size
FLM-3732/FLM-373B
LCD Panel
37’’ TFT LCD
Brightness
500
Contrast Ratio
1000:1
Max. Resolution
1366x768
Input Connector VIDEO/AUDIO(L/R)
S-VIDEO/AUDIO(L/R)
YPbPr/AUDIO(L/R)
VGA/AUDIO(L/R)
HDMI/AUDIO(L/R)
AUDIO OUT(L/R)
OPTICAL/COAXIAL
HEADPHONE
2
1
2
1
1
1
1
1
Power Source
AC100~240V, 50/60HZ, 3.0A
275 W, standby < 8 W
36.6 w x 28.2 h x 9.4 d inch
54 LB
Power Consumption
Dimension
WEIGHT
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Programming your Remote Control
Introduction
Your remote lets you control four devices with one easy-to-use, compact unit. After installing batteries, you can program the
remote to control your Universal TV, VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices. To
do so, follow the instructions in “Programming a Device”. For best results, please read and follow all the remaining
instructions. Keep this guide for future reference.
A Quick Look at Programming a Device
To control VCR or DVD, Cable or Satellite Receivers, Amplifier or Tuner, and Auxiliary devices, follow these steps. Before
proceeding, find the codes for the devices you want to program in “Manufacturer’s Codes” on the right side of this page and
write them down or highlight them.
NOTE: To program a DVD Player, TV/DVD Combo, TV/VCR/DVD Combo, portable DVD player, or mobile DVD player, use
the DVD key.
1. Turn on the device (for example, DVD player) and, if needed, load media (for example, a DVD).
2. Press a device key (VCR/DVD, CBL/ SAT, or AUX).
3. Press and hold SET until the red LED blinks twice; then release.
4. Enter the first five-digit code for your device. The LED blinks once as each digit is entered. If the code is correct,
the LED blinks twice.
•
NOTE: If the LED does not blink twice, repeat steps 2 to 4 and try entering the code again.
5. Aim the remote at the device and press Power. The device should turn off. If it does not, repeat steps 3–5, trying
each code for your brand until you find one that works. If you cannot find a code that works, see “Searching for
Your Code”.
6. Repeat steps 1–5 for the other devices you want to control. For future reference, write down each working device
code below:
AUX Code:
CBL Code:
CD Code:
DVD Code:
SAT Code:
TNR Code:
VCR Code:
7. Press set to save and exit
Searching for your Code
If your device does not respond to the remote after trying all codes listed for your brand, or if your brand is not listed, try
searching for your code:
1. Press a device key once.
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-1, then the device group number (0= Cable, 1= TV, 2= VCR, 3= Audio). The LED blinks twice.
4. Aim the remote at the device and press Power. The remote sends IR codes from its library to the selected device,
starting with the most popular code first. If the device responds, go to step 7.
5. If the device does not respond, press CH+. The remote will try the next code. Continue until the device responds.
•
Note: Press CH- to try the previous code.
6. To search for other device codes, repeat steps 1 to 5.
7. Press SET to save and exit.
Checking the Codes
If you have set up the remote using the procedure in “Searching for Your Code”, you may need to find out which four-digit
code is operating your equipment.
For example, to find out which code is assigned to your TV:
1. Press TV once.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-0. The LED blinks twice.
4. To view the code for the first digit, press 1. Count the LED blinks (for example, three blinks = 3), and write down
the number in the appropriate code listing in step 8 under “Programming a Device”.
•
NOTE: If a code digit is 0, the LED does not blink.
5. Repeat step 4 for the four remaining digits, using 2 for the second digit, 3 for the third digit, 4 for the fourth digit,
and 5 for the fifth digit.
6. To check for other device codes, repeat steps 1—5, substituting the device key for TV.
Changing Volume Lock
The remote comes preset to allow independent volume control of each selected device (Global Volume Unlock). However,
you may change the Volume Lock setting to Global Volume Lock so that one device's volume will control volume in all other
modes. After that, you can perform Individual Volume Unlock on a selected device to set its volume control for independent
operation or Global Volume Unlock to remove all volume locking.
Locking Volume Control to One Mode (Global Volume Lock)
1. Press and hold SET until the red LED blinks twice; then release.
2. Enter 9-9-3 and then press the mode key for the device you want to control volume (for example, TV). The LED
blinks twice. Now when you press VOL+, VOL-, or Mute, the selected device (for example, TV) will control the
volume regardless of the current mode.
Unlocking All Volume Control (Restoring Global Unlock)
1. Press and hold SET until the red LED blinks twice; then release.
2. Enter 9-9-3 and then press VOL+. The LED blinks four times.
Volume is now independently controlled for all programmed devices.
Unlocking a Single Device’s Volume Control
1. Press a device key (TV, VCR/DVD, CBL/ SAT, or AUX).
2. Press and hold SET until the red LED blinks twice; then release.
3. Enter 9-9-3 and then press VOL-. The LED blinks four times.
Volume is now independently controlled for the selected devices.
Troubleshooting
PROBLEM: LED does not blink when you press a key.
SOLUTION: Replace battery with one new 3.3 V 2032 Lithium battery.
PROBLEM: LED blinks when you press a key, but device does not respond.
SOLUTION: Make sure the remote is aimed at your device and is not more than 15 feet away.
PROBLEM: LED blinks one long blink.
SOLUTION: An entry error has occurred (for example, wrong key). Try entry sequence again.
PROBLEM: Remote does not control devices or commands are not working properly.
SOLUTION: Try all listed codes for the device. Make sure the device operates with an infrared remote control.
PROBLEM: CH+, CH-, and LAST do not work for your RCA TV.
SOLUTION: Due to RCA design from 1983 to 1987, only the original remote control will operate these functions.
PROBLEM: No volume on a device.
SOLUTION: See “Changing Volume Lock”.
PROBLEM: Channels do not change properly.
SOLUTION: If the original remote control required you to press Enter to change channels, press Enter on this remote after
entering the channel number.
B
Download from Www.Somanuals.com. All Manuals Search And Download.
MANUFACTURER’S CODES
Set Codes for Audio Amplifiers
Bose
GE
JVC
30674
30078
30331
30321
30321
30264
30395
30395
30321
30264
30689
30078
30331
30078
30354, 30133
Marantz
Nakamichi
NEC
Optimus
Realistic
Sansui
Shure
Sony
Soundesign
Victor
Wards
Yamaha
Set Codes for Audio Amp/Tuners
ADC
30531
Aiwa
Anam
Audiotronic
Bose
31405, 31243, 30121
31609, 31074
31189
31229
Capetronic
Carver
30531
31189
Coby
31263
Denon
31360, 31142, 30904
31360
Fonmix
Glory Horse
Harman/Kardon
Hitachi
31263
30110
31273
Inkel
30027
Integra
30135
JBL
30110
JVC
Kenwood
KLH
30074, 31263
31313, 31570, 30027
31428
Magnavox
Marantz
MCS
31189, 31269, 30531
31189, 31269, 30039
30039
Onkyo
30842, 30135
Optimus
Panasonic
Philips
31023, 30670, 30531, 31074
31518, 30039
31189, 31269
Pioneer
Proscan
Qisheng
Quasar
RadioShack
RCA
31023, 30150, 30014, 30630, 30531
31254
31609
30039
31263
31023, 31609, 31254, 30531, 31074
Sharper Image
Silsonic
Sony
Soundesign
Stereophonics
Sunfire
31263
30176
31258, 31759
30670
31023
31313
Teac
31074, 31267
31308, 31518, 30039
31189
Technics
Thorens
Victor
30074
Wards
30014
Yamaha
30176, 31276, 31176
C
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Codes for Cable Converters
ABC
00003, 00008, 00014
Americast
Bell & Howell
Bell South
Clearmaster
ClearMax
Coolmax
Daeryung
Digi
00899
00014
00899
00883
00883
00883
01877, 00877, 00477, 00008
00637
Director
Dumont
Gehua
00476
00637
00476
General Instrument
GoldStar
Hamlin
00476, 00810, 00276, 00003, 00014
00144
00009, 00273
Hitachi
00014
Jerrold
00476, 00810, 00276, 00003, 00012, 00014
KNC
00008
LG
00144
Memorex
Motorola
MultiVision
Pace
00000
00476, 00810, 00276, 01254, 01376
00012
01877, 00237
Panasonic
Panther
Paragon
Philips
00000, 00008, 00107
00637
00000
00317, 01305
Pioneer
Pulsar
01877, 00877, 00144, 00533
00000
Quasar
00000
RadioShack
Regal
Runco
00883
00279, 00273
00000
Samsung
Scientific Atlanta
Sony
00000, 00144
01877, 00877, 00477, 00008
01006
Starcom
Supercable
Supermax
Tocom
00003, 00014
00276
00883
00012
Torx
00003
Toshiba
Trans PX
Tristar
00000
00276
00883
TS
00003
V2
00883
Viewmaster
Vision
00883
00883
Vortex View
Zenith
00883
00000, 00525, 00899
Set Codes for CD Players
Aiwa
30157
Burmester
California Audio Labs
Carver
30420
30029
30157, 30179
30873
Denon
DKK
30000
DMX Electronics
Dynamic Bass
Fisher
30157
30179
30179
30420
Garrard
Genexxa
30032
D
Download from Www.Somanuals.com. All Manuals Search And Download.
Harman/Kardon
Hitachi
Integra
JVC
30157, 30173
30032
30101
30072
Kenwood
Krell
30826, 30626, 30028, 30037, 30036, 30190
30157
Linn
30157
Magnavox
Marantz
MCS
30157
30626, 30029, 30157
30029
Miro
30000
Mission
MTC
30157
30420
NSM
30157
Onkyo
30868, 30101
Optimus
Panasonic
Parasound
Philips
Pioneer
Polk Audio
Proton
31063, 30000, 30032, 30037, 30420, 30179, 31075, 30145
30029
30420
30626, 30157
31063, 31062, 30032
30157
30157
QED
30157
Quad
30157
Quasar
RadioShack
RCA
Realistic
Rotel
30029
31075
31062, 30032, 30420, 30179, 30053
30420, 30179
30157, 30420
30157
SAE
Sansui
Sanyo
30157
30179
SAST
30157
Sharp
30861, 30037
30888, 30036
30157
30490, 30000, 30100
30145
30157
30420
30420
Silsonic
Sonic Frontiers
Sony
Soundesign
TAG McLaren
Tascam
Teac
Technics
Victor
30029
30072
Wards
Yamaha
Zonda
30157, 30053
30888, 30036
30157
Set Codes for DVD Players
Aiwa
20641, 21912
Akai
20770
Allegro
20869
Apex Digital
Blaupunkt
Blue Parade
Broksonic
Changhong
CineVision
Coby
20672, 20717, 20797, 21061, 20796, 21056, 21937, 20794, 21020, 21915
20717
20571
20695
20627, 21061
20869
21086
Curtis Mathes
CyberHome
Daewoo
21087
21024, 21023, 21129, 20816, 21117
20833, 21172, 20869
Denon
DVD2000
20490
20521
E
Download from Www.Somanuals.com. All Manuals Search And Download.
Emerson
Enterprise
Fisher
20591, 20675
20591
21919
Funai
20675
Gateway
GE
21158, 21073
20522, 20717
Go Video
Greenhill
Harman/Kardon
Hitachi
20744, 20833, 21099, 20783, 21075, 20869, 21730
20717
20582, 20702
20573, 20664, 21919
Hiteker
20672
Initial
20717
Integra
20627, 21924
JBL
20702
JVC
20558, 20623, 20867
Kenwood
KLH
20490, 20534
20717, 21020, 21149
Koss
20651, 21980
Lasonic
LG
20798
20591, 20869, 20801
Liquid Video
Lite-On
Loewe
21980
21158, 21058
20511
Magnavox
Marantz
Memorex
Microsoft
Mintek
20503, 20539, 21976, 21914, 20675
20539
20695
20522
20717
Mitsubishi
Nesa
21521, 20521
20717
Norcent
Onkyo
21003
20503, 20627, 21924, 20792
Oritron
20651, 21980
Panasonic
Philips
20490, 21762, 21990
20503, 20539, 20646, 21914
Pioneer
Polaroid
Polk Audio
Portland
Proscan
Qwestar
RCA
20525, 20571
21086, 21061
20539
20770
20522
20651
20522, 20571, 20717, 20822
Rio
20869
Rotel
20623
Sampo
20752, 20698
Samsung
Sansui
20490, 20573, 21932, 21075, 20820
20695
Sanyo
20695
Sharp
20630, 20752
Sharper Image
Sherwood
Shinco
21117
20770
20717
Shinsonic
Sonic Blue
Sony
20533
20869, 21099
20533, 20864, 21033, 21904, 21903
SVA
20717
Sylvania
Symphonic
Teac
Technics
Theta Digital
Toshiba
Urban Concepts
Xbox
20675
20675
20717, 21984, 20809
20490
20571
20503, 20695
20503
20522
Yamaha
Zenith
20490, 20539, 20545
20503, 20591, 20869
F
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Codes for Satellite Receivers
AlphaStar
Chaparral
Crossdigital
DirecTV
00772
00216
01109
00392, 00566, 00639, 01142, 00247, 00749, 01749, 00724, 00819, 01856, 01076, 01109,
00099, 01392,
01640, 01442, 01414, 01108
Dish Network System
Dishpro
01005, 00775, 01505
01005, 00775, 01505
Echostar
Expressvu
GE
01005, 00775, 01505
00775
00566
General Instrument
GOI
00869
00775
Goodmans
Hisense
Hitachi
01246
01535
00819, 00222, 01250
HTS
00775
Hughes Network Systems
I-Lo
01142, 00749, 01749, 01442
01535
JVC
00775
LG
01414, 01226
Magnavox
Memorex
Mitsubishi
Motorola
NEC
00724, 00722
00724
00749
00869
01270
Next Level
Panasonic
Paysat
00869
00247, 00701
00724
Philips
01142, 00749, 01749, 00724, 01076, 00722, 00099, 01442
Proscan
Proton
00392, 00566
01535
RadioShack
RCA
Samsung
Sanyo
00869
00392, 00566, 00855, 00143, 01392
01276, 01109, 01108
01219
SKY
00856
Sony
Star Choice
Tivo
Toshiba
UltimateTV
Uniden
US Digital
USDTV
00639, 01640
00869
01142, 01442
00749, 01749, 00790, 01285
01640, 01392
00724, 00722
01535
01535
Voom
00869
Zenith
00856, 01856
Set Codes for TVs
Addison
10092
Admiral
10093, 10463
Advent
10761, 10842
Aiko
10092
Aiwa
11914
Akai
10812, 10702, 10030, 10672, 11903
Albatron
America Action
Anam
10700, 10843
10180
10250, 10180, 10700
Anam National
Anhua
10250, 10650
10051
AOC
Apex Digital
10451, 10093, 10180, 10060, 10030, 10178, 10092
10748, 10765, 10879, 10767, 11943
G
Download from Www.Somanuals.com. All Manuals Search And Download.
Audiovox
Baile
10451, 10180, 10875, 10092, 10623
10661
Beijing
10812, 10661
Bell & Howell
BenQ
10154
11032
Bradford
Broksonic
Cailing
10180
10236, 10463, 11911, 11938, 11905, 11935, 11929
10748
Candle
10030
Carnivale
Carver
10030
10054
Celebrity
Celera
10000
10765
Changcheng
Changhong
Ching Tai
Chun Yun
Chung Hsin
Cinema
Citizen
10051, 10661
10156, 10765, 11156, 10767
10092
10000, 10180, 10700, 10092, 10843
10180, 10053
10672
10180
Commercial Solutions
Conrowa
Contec
11447, 10047
10156, 10145, 11156
10180
Craig
10180
Crosley
Crown
10054
10180
Curtis Mathes
CXC
10047, 10054, 10154, 10451, 10093, 10060, 10702, 10030, 10145, 10166
10180
Daewoo
Dayu
10154, 10451, 10180, 10030, 10178, 10672, 11928, 10092, 10661, 11909, 10623, 10700
10661
Dell
11080
Denon
10145
Dumont
Durabrand
Electroband
Emerson
11911
10017
10463, 10180, 10178, 10171, 11034
10000
10154, 10236, 10463, 10180, 10178, 10171, 11944, 11909, 11929, 11905, 11928, 10623,
Envision
Ether
10030
10030
Firstar
10236
Fisher
10154
Fortress
Fujitsu
10093
10809, 10853
Funai
10180, 10171, 11904
Furi
10145
Futuretech
Gateway
GE
10180
11756, 11755
11447, 10047, 11454, 10051, 10451, 10180, 10030, 10178, 11917, 10092, 11907, 11922
Gibralter
GoldStar
Grunpy
10017, 10030
10154, 10030, 10178, 11926
10180
Haier
11034
Hallmark
Hankook
Harley Davidson
Harman/Kardon
Harvard
Havermy
Helios
10178
10180, 10030, 10178
11904
10054
10180
10093
10865
Hello Kitty
Hisense
Hitachi
10451
10156, 10748, 10145, 11156
10156, 10030, 10178, 11145, 10145, 10092, 11904, 11156
Hongmei
Huafa
Huari
10093
10145
10145
10051
Huodateji
H
Download from Www.Somanuals.com. All Manuals Search And Download.
Imperial Crown
Infinity
10661
10054
Inteq
10017
JBL
10054
JCB
10000
Jean
10156, 10051, 10236, 10092
Jensen
Jiahua
Jinfeng
Jinxing
JVC
10761
10051
10051
10054, 10156, 10145
10053, 11923, 11253
Kangli
10661
KEC
10180
Kenwood
KLH
10030
10765, 10767
Kolin
10180, 10150, 10053
KTV
10180, 10030
Kunlun
LG
10051, 10661
10060, 10030, 10178, 10856, 10700, 10025
Lloyd's
LXI
11904
10047, 10054, 10154, 10156, 10178
Magnasonic
Magnavox
Magnin
Marantz
Matsushita
Maxent
Megapower
Megatron
Memorex
MGA
11928, 11913
11454, 10054, 10030, 10706, 11931, 11254, 11913, 11904, 11944
11907
10054, 10030, 10704
10250, 10650
11755
10700
10178, 10145
10154, 10463, 10150, 10178, 11911, 11926, 11924, 11920, 11927
10150, 10030, 10178, 11907
Midland
Mitsubishi
Monivision
Motorola
MTC
10047, 10017, 10051
10154, 10250, 10093, 10236, 10180, 11250, 10150, 10030, 10178, 11917, 10836
10843, 10700
10093
10060, 10030
Mudan
Multitech
NAD
10051
10180
10156, 10178, 10866
National
NEC
10051
10154, 10156, 10051, 10053, 10030, 10178, 11704
Newave
Nikko
10093, 10178, 10092
10030, 10178, 10092
Norcent
NTC
10748, 10824
10092
Onwa
10180
Optimus
Optonica
Orion
10154, 10250, 10166, 10650, 11927, 11924, 11913
10093
10236, 10463, 11929, 11911, 11905
Panasonic
Panda
10054, 10250, 10051, 10650, 11941, 11927, 11924
10051, 10706
Penney
Philco
10047, 10156, 10051, 10060, 10030, 10178, 11926, 11907
10054, 10180, 10030, 10178
Philips
Pilot
11454, 10054, 10000, 10051, 10030, 10178, 10092, 10690
10030
Pioneer
Portland
Prima
10166, 10866, 10679
10092
10761
Princeton
Prism
10700
10051
Proscan
Proton
Pulsar
11447, 10047, 11922
10030, 10178
10017
Qingdao
Quasar
RadioShack
10051
10250, 10051, 11924, 10650
10047, 10154, 10180, 10030, 10178, 11920, 11904
I
Download from Www.Somanuals.com. All Manuals Search And Download.
RCA
11447, 10047, 11454, 10000, 10030, 10178, 11547, 11922,11917, 10092, 11907, 11948,
10090, 10679
Realistic
Rowa
10154, 10180, 10030, 10178
10748
Runco
10017, 10030
Sampo
Samsung
10766
10154, 10093, 10030, 10178, 10171, 10700, 10650, 11755, 10092
10154, 10156, 10060, 10812, 10702, 10030, 10178, 11060, 10814, 10092, 11903, 10090,
Sansui
10463, 11904, 11935, 11929, 11911
Sanyo
10154, 10156, 10180, 10145, 11907
Sanyuan
Scotch
10093
10178
Scott
10236, 10180, 10178
Sears
10047, 10054, 10154, 10156, 10178, 10171, 11926, 11904
Shaofeng
Sharp
10145
10093, 10030, 10650, 11917
Shen Ying
Shencai
Sheng Chia
Skygiant
Skyworth
Sony
10092
10145
10093, 10236
10180
10748
11100, 10000, 10650, 11925, 11904
Soundesign
Sowa
10180, 10178
10156, 10051, 10060, 10178, 10092
Squareview
SSS
10171
10180
Starlite
10180
Studio Experience
Supreme
SVA
10843
10000
10748, 10865
Sylvania
Symphonic
Synco
10054, 10030, 10171, 11944, 11931
10180, 10171, 11913, 11904
10000, 10451, 10093, 10060, 10178, 10092
Tacico
10178, 10092
Tandy
10093
Tashiko
Tatung
10092, 10650
10054, 10154, 10156, 10051, 10060, 11156, 11756, 11254
Technics
Techwood
Teco
10250, 10051
10051
10051, 10093, 10178, 10092
Teknika
Telefunken
Tera
10054, 10180, 10150, 10060, 10092
10702
10030
Thomas
Tiane
11904
10093
TMK
10178
TNCi
10017
Tobo
10748
Toshiba
Tuntex
10154, 10156, 10060, 10145, 11945, 11704, 11936, 11156,11935, 10650, 11918
10030, 10092
TVS
10463
V Inc.
11756, 10885, 10864
Vector Research
Victor
10030
10250, 10053, 10650
Vidikron
Vidtech
Viewsonic
Wards
10054
10178
11755, 10885, 10864
10054, 10030, 10178, 10866, 11156
Warumaia
Waycon
White Westinghouse
Yamaha
Yapshe
Zenith
10661
10156
10463, 11909, 10623
10030
10250
10017, 10463, 10178, 11904, 11929, 11911, 11909, 10092
Set Codes for VCRs
J
Download from Www.Somanuals.com. All Manuals Search And Download.
ABS
Admiral
Aiko
21972
20278
20048, 20209
Aiwa
20037, 20479
Alienware
America Action
American High
Amoisonic
Anam
21972
20278
20035
20479
20162, 20037, 20240, 20278
Anam National
Asha
20162
20240
Audiovox
Beaumark
Bell & Howell
Broksonic
Calix
20037, 20278
20240
20104
20184, 20121, 20209, 20002, 20479
20037
Canon
Carver
20035
20081
CCE
20072, 20278
Changhong
Citizen
20048, 20081
20037, 20278
Colt
20072
Craig
20037, 20047, 20240, 20072
Curtis Mathes
Cybernex
CyberPower
Daewoo
Dell
20060, 20035, 20162
20240
21972
20045, 20104, 20278
21972
Denon
20042
DirecTV
Durabrand
Electrohome
Electrophonic
Emerex
20739
20039, 20038
20037
20037
20032
Emerson
Fisher
Fuji
20035, 20037, 20184, 20240, 20045, 20121, 20043, 20209, 20002, 20278, 20479
20047, 20104
20035, 20033
20045
Fujitsu
Gateway
GE
General
Go Video
GoldStar
Haojie
21972
20060, 20035, 20240
20045
20432
20037, 20209, 20038, 20225
20240
Harman/Kardon
Harwood
Hewlett Packard
HI-Q
20081, 20038
20072
21972
20047
Hitachi
Howard Computers
HP
20037, 20042, 20055
21972
21972
Hughes Network Systems 20042, 20739
iBUYPOWER
JVC
21972
20045, 20067
KEC
20037, 20278
Kenwood
KLH
20067, 20038
20072
Kodak
Kolin
20035, 20037
20043
LG
20037, 20045, 20042, 20209, 20038
Logik
20072
LXI
20037
Magnavox
Magnin
Marantz
Marta
20035, 20039, 20081
20240
20035, 20081
20037
K
Download from Www.Somanuals.com. All Manuals Search And Download.
Matsushita
Media Center PC
MEI
20035, 20162
21972
20035
Memorex
MGA
20035, 20162, 20037, 20048, 20039, 20047, 20240, 20104, 20209, 20479
20240, 20043
MGN Technology
Microsoft
Mind
20240
21972
21972
Minolta
Mitsubishi
Motorola
MTC
20042
20067, 20043
20035, 20048
20240
Multitech
NEC
20072
20035, 20037, 20048, 20104, 20067, 20038
Newave
Nikko
20037
20037
Noblex
20240
Northgate
Olympus
Optimus
Orion
21972
20035
21062, 20162, 20037, 20048, 20104, 20432
20184, 20209, 20002, 20479
Panasonic
Penney
Pentax
21062, 20035, 20162, 20616, 20225
20035, 20037, 20240, 20042, 20038
20042
Philco
20035, 20479
Philips
20035, 20081, 20739, 20618
Pilot
20037
Pioneer
Polk Audio
Profitronic
Proscan
Protec
20042, 20067
20081
20240
20060
20072
Pulsar
20039
Qisheng
Quasar
Radix
20060
20035, 20162
20037
Randex
RCA
20037
20060, 20035, 20240, 20042, 20880
Realistic
ReplayTV
Runco
20035, 20037, 20048, 20047, 20104
20616
20039
Sampo
Samsung
Sanky
20037, 20048
20240, 20045, 20432
20048, 20039
Sansui
20067, 20209, 20479
Sanyo
20047, 20240, 20104
Scott
20184, 20045, 20121, 20043
Sears
20035, 20037, 20047, 20042, 20104
Sharp
20048, 20209
Shintom
Shogun
Singer
20072
20240
20072
Sonic Blue
Sony
20616
20035, 20032, 20033, 20636, 21972
STS
20042
Sylvania
Systemax
Tagar Systems
Tashiko
Tatung
20035, 20081, 20043
21972
21972
20037
20045, 20067
Technics
Teco
Teknika
Tivo
20035, 20162
20035, 20037, 20048, 20038
20035, 20037
20636, 20618, 21503, 20739
20240
TMK
Toshiba
20045, 20042, 20067, 20043, 21503, 21008, 21972
L
Download from Www.Somanuals.com. All Manuals Search And Download.
Totevision
Touch
20037, 20240
21972
Unitech
20240
Vector
20045
Vector Research
Victor
20038
20067
Video Concepts
Videomagic
Videosonic
Viewsonic
Wards
20045
20037
20240
21972
20060, 20035, 20048, 20047, 20081, 20240, 20042, 20072
White Westinghouse
XR-1000
20209, 20072
20035, 20072
Yamaha
20038
Zenith
ZT Group
20039, 20033, 20209, 20479
21972
CARE
•
•
•
•
Keep the remote dry. If it gets wet, wipe it dry immediately.
Use and store the unit only in normal temperature environments.
Handle the remote gently and carefully. Don’t drop it.
Wipe the remote with a damp cloth to keep it looking like new.
For service, support and warranty information, visit www.polaroid.com or in the US call 1-866-289-5168,
in Canada call 1-866-301-7922 and in Mexico call 01-800-400-2443.
"Polaroid" and “Polaroid and Pixel” are trademarks of Polaroid Corporation, Waltham, MA, USA.
M
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|