15"/ 38cm HD-Ready LCD Television
FLA-1512B
20060508
Download from Www.Somanuals.com. All Manuals Search And Download.
Polaroid. Add a little color to your life.
Since 1937, people have turned to Polaroid for their photography needs. Today, families look to Polaroid for consumer
electronics that define the digital age: plasma and LCD TVs, portable and standard DVD players, digital cameras. And
while our selection has changed, you’ll still receive the same friendly, helpful service. Congratulations on your new
Polaroid LCD TV purchase. To ensure your new LCD TV provides you with years of enjoyment, please read this guide
carefully.
Instruction Manual
WARNING
Caution: To reduce the risk of
To reduce the risk of fire
CAUTION
electric shock, do not remove
cover (or back). No user
serviceable parts inside. Refer
servicing to qualified service
personnel.
or electric
shock,
do
not expose this
RISK OF ELECTRIC SHOCK.
DONOT OPEN
product to rain
or
moisture.
Apparatus
be exposed
dripping
and no objects filled
with liquids, such as
vases, shall be placed
on the apparatus.
shall
not
to
This symbol
indicates important
instructions
accompanying the
product.
This
indicates
“dangerous voltage” inside
the product that presents a
risk of electric shock
or personal injury.
symbol
or splashing
Apparatus
connected to a MAINS
socket outlet with
shall
be
a
Caution: To
prevent
electric
shock,
plug
protective
earthing
the
connection.
3-pronged plug into a grounded outlet.
Refer to the identification/rating label located on the back panel of your
product for its proper operating voltage.
Caution: Using video games or any external accessory
with fixed images for extended periods of time can cause
them to be permanently imprinted on the LCD panel (or
projection
ALSO,
TV
picture
tubes).
some network/program logos, phone
numbers, etc. may cause similar damage. This damage
is not covered by your warranty.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record
the serial and model numbers in case you need them. These numbers are located on the back of your LCD
color television.
Model No.
Serial No.
Purchase Date:
Dealer/Address/Phone:
Instruction Manual
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When
a
cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
15. Warning: This unit should only be serviced by an authorized and properly trained technician.
Opening the cover or other attempts by the user to service this unit may result in serious injury or
death from electrical shock, and may increase the risk of fire.The MAINS plug or an appliance coupler of the
apparatus is used as the disconnect device, the disconnect device
16. The MAINS plug or an appliance coupler of the apparatus is used as the disconnect device,
the disconnect device shall remain readily operable.
17. No naked flame source, such as lighted candles, should be placed on the apparatus.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PACKING LIST
LCD TV
1
1
1
1
1
2
1
1
1
Operation Manual
Power Adapter
AC Power Cable
Infrared Remote Control
Remote Control Battery
Warranty Card
Quick Start Guide
AV Cable
Note:
Please keep the original box and packaging for transporting the set in the future.
GENERAL INFORMATION
„
„
„
„
Radio Frequency input; supports CATV
Capable of receiving cable programs in 470MHz, it can store 236 TV channels
AV input
Convenient for watching a DVD player, VCR, video camera or other playback devices.
S-Video input
Convenient of receiving a high quality component signal from a DVD player
HDTV input
Capable of receiving the high definition YPbPr signal in 480i, 480P, 576i, 576P, 720P,
1080i , and 1080P formats
„
D-sub input
a. Convenient to connect with a host computer
b. Use as a data display terminal
c. Connect the 3.5mm (diameter) audio jack to your computer’s soundcard to listen to
stereo sound transmitted from your home computer
Program & Child Lock
„
„
Capable of blocking inappropriate programs and the function button on the front panel.
Timer function
4
Download from Www.Somanuals.com. All Manuals Search And Download.
„
Blue background with noise reduction
In AV S-VIDEO and YPbPr modes, screen displays soft blue background if there is no signal
input
„
„
Multi Language On-Screen Display menu
Text and graphical user interface makes the menu operation user-friendly
Power Energy Saving Mode (Power management mode)
When used as PC display terminal without PC signal output, the LCD TV will automatically
power off within 30 seconds and enter Power Energy Saving Mode. It will automatically start
up again when it receives a signal from the PC. To start the TV manually with no signal press
the number buttons or
Plug and Play
/CH+/CH- on the remote control
„
No additional software is needed when the product is used as computer terminal display
„
„
„
„
Automatic picture quality adjustment
Power management mode
Auto on timer
Zoom mode
Full-screen, 16:9, cinema, subtitle
Low power consumption
Picture enhancement function
High definition display panel
Dynamic comb filter
„
„
„
„
„
Headphone output
5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Front Panel
The button names and functions are as follows:
Panel buttons
Button
Description
To switch between TV, AV, S-Video, YPbPr and PC signal sources.
The same function as SOURCE on R/C (remote control) in menu
operation.
SOURCE
To enter or quit from the OSD (On-Screen Display) menu.
The same function as MENU on R/C
To decrease the sound volume. Adjust functions in menu operation.
The same function as Vol- on the R/C
MENU
VOL-
To increase the sound volume. Adjust functions in menu operation. The
same function as Vol+ on R/C
VOL+
1. In TV mode, decrease the channel number
2. To select functions in menu operation.
CH-
3. The same function as CH- on the R/C
1. In TV mode, increase the channel number
2. To select functions in menu operation.
CH+
3. The same function as CH+ on R/C
To power on or put the LCD TV to STANDBY
The same function as
on R/C
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
Headphone Output
Detail Illustration of Signal Input Ports
RF
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Power On/Off
Signal Source Switch
Channel Number
Picture Mode Selection
Sound Mode Selection
Return to last viewed program
Channel Up
Volume Up
Volume Down
Channel Down
On-screen Display Menu
Screen Size Mode Selection
Show Info of Current Program
Sleep Timer
Sound Mute On/Off
Note:
1. When in operation, point the remote control directly at the infrared sensor.
2. Do not subject the remote control to impacts, water or disassembly.
3. When pressing the buttons on the remote control, allow an interval of no less than one
second between selections.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
1. Remove the LCD TV from the box and place it on a flat surface in a well-ventilated location.
2. Connect the output terminal of RF cable to the corresponding TV RF signal input terminal.
The LCD TV is a high technology digital product, use quality RF cables to obtain optimal
results.
3. Connect the output terminal of the AV devices such as DVD player, VCR, etc. to the
corresponding terminal of your LCD TV.
4. Connect one end of the D-sub terminal to the corresponding terminal of the host computer,
and connect the other end to the corresponding LCD TV terminal. Screw down the screws
on both sides to secure it.
Caution:
When connecting, plug directly and lightly to the interface, otherwise you may
damage the pins in the connector.
5. Ensure that every AV signal cord is correctly connected to the corresponding jack.
6. Put the DC power plug in the DC input outlet of the TV, then plug the AC power plug of the
power adapter in the AC power outlet.
GENERAL OPERATION
To Turn the TV On
After the power cord is plugged into the power socket, the TV will enter Standby mode.
Press
on the remote control or the front panel to turn the TV on
To Turn the TV Off
1. Press
on the remote control or the front panel to turn the TV off.
2. Unplug the DC power adapter from the AC wall outlet and then unplug the power adapter
from the TV to turn the set off completely.
Caution: The TV will be shut off automatically when AC power is interrupted. Unplug the
power adapter from the AC outlet if this happens. The last used TV mode will
appear when power resumes.
Do not turn the TV on/off too often.
Unplug the power adapter from the AC outlet if power is suddenly interrupted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Operation
1. Use the On Screen Display menu to set and adjust functions
2. Use 【CH+】/【CH-】 to select the desired menu after pressing【MENU】, then press【VOL+】
【/ OK】to enter the corresponding menu and use【CH+】【/ CH-】to choose from the menu option;
Use 【VOL+】/【VOL-】to adjust the options value and return to the previous menu by pressing
Function Introduction
【MENU】again. The menu will disappear without any operation within 10 seconds.
In TV, AV, S-VIDEO, YPbPr and PC modes
Ⅰ Picture
● Brightness
To adjust the picture’s brightness
● Contrast
To adjust the picture’s contrast.
● Sharpness
To adjust the picture’s definition.
● Colour
To adjust the picture’s color.
● Tint
To adjust the picture’s tint. (For NTSC signal only)
Note: Picture menu options in other signal sources. AV/S-VIDEO: the same as in TV
mode
YPbPr/PC: only two options of Brightness and Contrast
ⅡSound
● Volume
To increase or decrease the volume.
● Balance
To balance the volume between the left and right
speakers.
● Woofer
To turn on/off the woofer.
● Spatial
To turn on/off the surround.
● Equalizer (submenu)
Use 【VOL+ 】/ 【OK 】to enter the Equalizer
(submenu), you can increase or decrease the value
of the sound output in every frequency band
preferred
Note: The Audio menu options are the same in TV
signal as well as in other signal sources
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ⅲ Setup
● Language
To select the language displayed.
● Blue Back
In this mode, a blue background will appear
when there is no signal input.
● Program Lock
In the submenu of Program Lock, the Enter
Password menu appears (this menu will appear
when you switch to a channel after it was locked once);. Input the default password of 1235,
the submenu of Program Lock will be displayed if the password is correct.
(a) When changing the password, the password will be updated after four digits are input
twice. The word ”OK” will then appear. Otherwise, the word “Failed” will appear if two
passwords are different.
（b）Unlock all the locked programs when Clear All is entered.
（c）When some locked channels are switched to after exiting from the Program Lock menu,
the picture and sound will be locked unless the correct password is entered. The unlocked
status will remain until the TV is turned off. Password must be re-keyed after switching on
the TV to the locked channels again.
(d) Operating Auto Search will cancel the current locked status.
（e）The default password will always be effective.
（f）Entering the default password allows you to go to the Program Lock menu, then change
the password while the default password is still effective. The branch menu cannot be
entered if a wrong password was keyed in, therefore the previous menu needs to be
reverted by pressing 【MENU】
（g）There will be a short pause when entering the functions of Lock All and Clear All.
(h) All programs would be locked when Lock All is entered.
● Child Lock
In Child Lock On mode, local buttons on TV do not work. A prompt ”keyboard locked” will
be displayed. However, the remote control buttons will still function. When the TV is on and
the Child Lock is on, a prompt ”Locked, power off after 6s” will appear, using the remote
control can solve this. Otherwise, It will automatically enter into Standby mode.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
● Prog. Swap (submenu)
Swap between two programs and their
channels. This can be done by pressing
Switch button after two different channels are
selected.
● Program
Display the current program’s channel
number
● Name
Rename the program with four colored
buttons on the remote control
for Capitalized English letters
【1】
for Alphanumeric numbers from 0 to 9
【2】
for special characters as “#”
【3】
Resuming “*” in unnamed mode
【4】
Use【VOL+】/【VOL-】to input and select the characters
Note: In PC signal mode, there are 2 options of Language and Child Lock in the Setup
menu. In AV/S-VIDEO/YPbPr signal mode, there are 3 options of Language,Blue Back
and Child Lock.
Ⅳ Tune
Press【CH+】【/ CH-】to select the Tune menu. There
are altogether 7 items to adjust: Auto Search,
Search, Band, Fine Tune, Color System, Sound
System and Skip.
● Auto Search
In Auto Search mode
1. The TV does auto-search and stores
programs from VHF-L to UHF.
2. During search, all programs searched are automatically stored.
3. When the search is done or when all 236-program positions are occupied, or you
have pressed 【MENU】during the search process, the search will halt and the TV will
return to the Tune menu with channel 1.
● Search
In Search mode, press【VOL+】【/ VOL-】so that the TV manually searches the upper or lower
program position until one program was searched and automatic storage will commence. If
the program is not needed, then press【VOL+】/【VOL-】again. After pressing 【MENU】, the TV
will exit from Search and return to the menu.
● Band
To set which band the current program belongs to.
● Fine Tune
In Fine Tune mode, press【VOL+】【/ VOL-】 to until the best picture and sound is achieved. After
adjusting, the TV will auto-store the channels. Press 【MENU】to exit and return to the Tune
menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
● Color System
To set the color system of the current program and use【VOL+】/【VOL-】to switch between
PAL, NTSC,N4.43, SECAM and Auto systems.
● Sound System
To switch between B/G,D/K,I, and M sound systems.
● Skip
Skipping the unwanted program can dramatically quicken program selection.
1. Turn Skip on, pressing【CH+】/【CH-】can not select this program.
2. Input the program number directly to locate the program.
Note: There is only Color System for the Tune Menu in AV, S-VIDEO signal sources. There
is PC Setup menu for the Tune menu in PC signal source. There is no Tune menu in YPbPr
signal source.
Ⅴ Clock
● Current Time
The current time can be set by using the
number buttons (0-9) or【VOL+】/【VOL-】.
● On Time
The function of On Time can be effective when
On Mode is on. Press the number buttons or【VOL+】
/【VOL-】to set the time.
● On Mode
When this function is on, a preset time can be
programmed to turn on the TV.
● On Prog
To enter a selected program directly after Timer On is set.
● Off Time
The function of Off Time can be effective only when Off Mode is on. Press the number
buttons (0-9) or【VOL+】/【VOL-】to adjust the time.
● Off Mode
When this function is on, a preset time can be programmed to turn off the TV.
Note: The TV can only be turned on automatically when it is in standby mode. The Clock
menu is applicable in all signal sources.
Ⅵ PC Setup
● H Position
To adjust picture position horizontally.
● V Position
To adjust picture position vertically.
● Clock
To adjust picture clock position.
● Phase
To adjust picture phase.
● Color Temp
Four modes of Warm、Normal、Cool and User can be chosen with【VOL+】/【VOL-】in cycle.
Only in User mode can adjustments be made to the three options: Red, Green and Blue.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
● Auto Adjust
To automatically adjust the picture position, clock, phase and color temperature to a
preset optimum value. This mode is invalid in DOS mode.
Note: The PC Setup menu is only available in the PC signal source.
Other Functions
● Volume Control
-
1. Press【VOL+】 to increase or
to decrease the volume when there is no menu on the
【VOL 】
screen. The Volume bar will disappear if there left idle for more than 6 seconds.
2. Press the【MUTE】button on the remote control to turn On/Off the MUTE mode. In Mute
mode, a sign of“Mute” in red will appear on the upper-right corner of the screen. This
symbol is hidden when the menu operation is entered, but the feature is still valid. It appears
again when the menu operation is exited. When there is no valid signal input, the TV will be
mute (but no mute symbol) with a blue background.
● Sound Mode Selection
Press 【SOUND】 to select between Personal, News, Theater and Music modes and
activate the Picture Mode. The latter three modes are default setting that cannot be adjusted.
Entering the Personal mode allows setting to the preferred mix.
Sound Mode
Personal
News
Sound Quality
For the user’s preference
For general programs of conversations and news report
For better audience effect as soft, magnificent and vivid
For general music programs
Theater
Music
Note: The operation and setting of the Volume Control are applicable to all the signal
sources.
● Picture Mode Selection
Press【PICTURE】to Switch among Personal, Soft, Normal and Rich modes.
Picture Mode
Personal
Soft
Picture Quality
For the user’s preference
For more mellow pictures
For general programs
Normal
Rich
For better visual effect such as magnificent and vivid
Note: The setting of this selection is in the same state are applicable to all the signal
sources.
● Recall
In TV mode, press【LAST】on the remote control to return to the previous channel or
signal source.
● Signal Switch
YPbPr and PC. The order is as below:
Press【SOURCE】on the remote control to select between the signal sources: TV AV, S-VIDEO,
,
TV
AV
S-VIDEO
PC
YPbPr
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OL
【
V
● Channel Switch
Use the number buttons to choose the desired channel directly or press【CH+】/【CH-】
on the panel or
on the remote control to select the channel number. If a channel
【CH+】/【CH-】
number is in SKIP ON mode, the next channel will be displayed.
A maximum of 3 digits can be keyed in at one time with the number button on the remote
control. The symbol of “- -” on the upper-right corner represents tens and one
respectively.. ,two digits are only admitted if a number input is beyond the range and the
number for hundred digit is bigger than “2”.The first input number is for hundreds, if it is
“1”,“1- -”appears on. The TV will switch to channel 1 if no number is input in 3 seconds.
The second is for tens if it is “2”,“12 -”appears on. The TV will switch to channel 12 if no
number is input in 3 seconds and the third is for ones., Press 【OK】to turn to the desired
channel quickly after the corresponding number is input.
Note: This function is only available in TV mode
● Sleep Function
Press【SLEEP】on the remote control once to
Sleep 30
activate the function and subsequent keying in to
select the sleep time of 0, 15, 30, 45, 60,90, 120,
150,180, 240 and 0 minutes. This is will be reflected in
the top right hand corner of the screen. After this step
is done, press【SLEEP】to view the set sleep. See the
illustration in the right.
● Indicator Light
Status
Light Colour
Off
Description
The TV works normally/is power off
In Standby Mode
On/Off
Standby
Red
Timer On/Off Or Sleep
Sleep (PC)
Green
Yellow
Timer On/Off is valid or Sleep is on
Sleep for power-saving;
Receives signal from
the remote control
The indicator will flicker when the TV
receives signal from the remote control
Flickering
15
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Before calling a technician, please check the following table to see if the below
mentioned symptoms can be diagnosed and fixed.
Symptoms
No picture, no 1. The power cord is not plugged
sound, and no in
indicator light 2. The power is off
on
Possible Reasons
Correction
1. Plug the power cord in
2. Turn on the power
No picture, no
sound, but the Functions of ON/OFF TIME and
Press【 】to turn on the TV
green light
indicator
SLEEP have been set
No picture, no 1.PC is in VGA Mode without any 1.Press 【 】or input the PC
sound, but the
yellow light
indicator
PC signal input
2.The signal cord is not connected 2.Connect
signal
the
signal
cord
correctly
properly
1.Adjust the value of Contrast,
sharpness, and colour
2.Set the Colour System to the
country broadcasting standard
3.Set the Sound System to the
country broadcasting standard
1.Contrast, sharpness, and colour
are set improperly
2.Colour system is set improperly
3.Sound system is set improperly
Picture and
sound with
abnormality
Picture is
spotted or with
snow
Signal source is low-grade or the
signal is in a lower quality
Use the qualified signal cord
Blue
background
No Video signal or the signal cord is
improperly/not connected
Connect the signal cord properly
Picture is
unclear, or
Adjust automatically by selecting
Auto Adjust or adjust Clock 、
Phase、H Position and V Position
manually after enter into the PC
Setup menu to solve this problem
moves or have
black stripes
on horizontal
position in PC
mode
Picture is not well adjusted
PC Picture is
not in the
middle of the
screen
Adjust pictures automatically by
resetting H Position、V Position、
Phase and Clock
Picture is not well adjusted
1.Connect the audio signal cord
properly
No Audio signal or the signal cord is
improperly/not connected
No sound
2.Set the sound system properly
1.Make sure the positive and the
negative polarities are correct.
The remote
control does
not work
Batteries are improperly installed or 2.Check if there is loose contact
exhausted
between the springs and the
batteries.
3.Replace the batteries
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
FLA-1512B
Items
Specifications
Size (diagonal)
38cm/15.0 inch
250 cd/m2
450:1
Brightness
Contrast
Angle of View
Speed Response
Lamp Life
1200(H)/1000(V)
16 ms
LCD panel
items
50,000 Hours
Recommended
Pixel Pitch
1024 X 768
0.297mm(H) X 0.297mm (V)
1024XRGBX768
304.1mm(H) x 228.1mm (V)
16.7million
Number of Dots
Viewable Area
Color Display
Color System
Sound System
PAL/SECAM
D/K,B/G,I,M
PC Qualified Input Format
VGA/SVGA/XGA
YPbPr Input
Format
480i, 480p, 576i, 576p, 720p, 1080i,1080p
Audio Output Consumption
AV-Audio Input
2x2.0 W
One way (S-Video is parallel)
AV-Video Input
One way
Headphone Output
Comb Filter
One way
YES
S-Video Input
One way
YPbPr Input
One way (with audio input)
One way
D-sub Video Input
D-sub Audio Input
DC Voltage Input
Power Adaptor Voltage Input
Rated Power Consumption
Standby Power Consumption
Unit Dimension
One way
DC 12V
Please refer to the power adapter.
≤1.5W(with power adapter)
454mm(W)×343mm(H)×166mm(D)
4.5kg (approximate)
Net Weight
Note:
The LCD panel is a high technology product that reproduces finely detailed pictures.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green,
red, black or white. Please note that this does not affect the performance of your LCD TV.
For service, support, and queries, call 1300 366 144.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|