Polaroid DVD VCR Combo DVC 2010 User Manual

DVD Player/HiFi VCR Combo  
DVC-2010  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Safety Instructions  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result in  
hazardous radiation exposure.  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND  
THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFERENCE.  
This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.  
The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.  
This unit is fully transistorized and does not contain any parts that can be repaired by the user.  
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL ONLY.  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings  
4. Follow all instructions.  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth  
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that  
produce heat.  
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than  
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your  
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where  
they exit from the apparatus.  
11. Only use attachments/accessories specified by the manufacturer.  
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart  
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or when unused for long periods of time.  
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,  
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus  
has been exposed to rain or moisture, does not operate normally, or has been dropped.  
ADDITIONAL SAFETY INSTRUCTIONS  
15. When you use headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume  
sound, it may cause tearing damage.  
16. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric  
shock.  
17. Keep your fingers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.  
18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and serious  
damage to the apparatus.  
19. Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and  
apparatus malfunction.  
20. Caution - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service personnel.  
Caution: This unit should only be serviced by an authorized and properly trained technician. Opening the cover or other  
attempts by the user to service this unit may result in serious injury or death from electrical shock, and may increase the  
risk of fire.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Notes on handling  
• When shipping the Player, the original shipping carton and packing materials come in handy. For maximum protection, repack the  
unit as it was originally packed at the factory.  
• Do not use volatile liquids, such as insect spray, near the player. Do not leave rubber or plastic products in contact with the Player  
for a long time. They will leave marks on the finish.  
• The top and rear panels of the Player may become warm after a long period of use. This is not a malfunction.  
• When the Player is not in use, be sure to remove the disc and turn off the power.  
• If you do not use the Player for a long period, the unit may not function properly in the future. Turn on and use the player occasionally.  
Notes on locating  
• Place the player on a level surface. Do not use is on a shaky or unstable surface such as a wobbling table or inclined stand. The  
loaded disc may come off the proper position and cause damage to the player.  
• When you place this player near a TV or radio, the playback picture may become poor and the sound may be distorted. In this case,  
place the player away from the TV or radio.  
Notes on cleaning  
Use a soft, dry cloth for cleaning.  
• For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth to wipe it dry. Do not use any  
type of solvent, such as thinner and gasoline, as they may damage the surface of the player.  
• If you use a chemical saturated cloth to clean the unit, follow that product's instructions.  
To obtain a clear picture  
The player is a high tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn down, the picture quality  
becomes poor. To obtain a clear picture, we recommend regular inspection and maintenance (cleaning or parts replacement) every  
1,000 hours of use depending on the operating environment. For details, contact your nearest dealer.  
Notes on moisture condensation  
Moisture condensation damages the player. Please read the following carefully.  
Moisture condensation occurs, for example, when you pour a cold drink into a glass on a warm day. Drops of water form on the outside  
of the glass. In the same way, moisture may condense on the optical pick-up lens inside this unit, one of the most crucial internal parts  
of the player.  
Moisture condensation occurs during the following cases.  
• When you bring the player directly from a cold place to a warm place.  
• When you use the player in a room where you just turned on the heater, or a place where the cold wind from the air conditioner  
directly hits the unit.  
• In summer, when you use the player in a hot and humid place just after you move the unit from an air-conditioned room.  
• When you use the player in a humid place.  
Do not use the player when moisture condensation may occur.  
If you use the player in such a situation, it may damage discs and internal parts. Remove the disc, connect the power cord of the  
player to the wall outlet, turn on the player, and leave it for two or three hours, the player will have warmed up and evaporated any  
moisture. Keep the player connected to the wall outlet and moisture condensation will seldom occur.  
Table of Contents  
Safety Precautions..............................................................................1 Playing Back a Disc...........................................................................11  
Important Safety Instructions.............................................................2 Locating a Specific Title, Chapter or Track....................................13  
Precautions..........................................................................................3 Using the On-screen Display............................................................13  
Introduction.........................................................................................4 Playing Repeatedly............................................................................14  
Notes On Discs....................................................................................4 Playing in Random Order..................................................................14  
Identification of Controls....................................................................5 Zooming a Picture On DVD...............................................................14  
Remote Control....................................................................................5 Selecting Subtitles ............................................................................14  
Connecting with TV..............................................................................6 Playing in a Favorite order................................................................15  
Connecting with other Video Equipment......................................7 Selecting The Camera Angles/Languages/Audio Settings............15  
Connecting TV With S-VIDEO /Component Jack, AMP With Digital MP3 Operation...................................................................................16  
Audio Out Jack....................................................................................7 WMA Operation..................................................................................16  
Progressive Scan................................................................................7 Playing Back Your Kodak Picture CD/JPEG....................................16  
VCR Playback....................................................................................8 Setting the Parental Lock..................................................................17  
Recording...........................................................................................8 Customizing the Function Settings..................................................18  
Search Function.................................................................................9 Troubleshooting Guide.....................................................................19  
VCR Setting........................................................................................9 Specifications....................................................................................20  
Tape Handling....................................................................................10 Memo On Output Sounds..................................................................20  
AFF Function.....................................................................................11  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Your new VCR&DVD PLAYER is designed for you to enjoy all forms of disc media and VHS Tape. Your player  
will allow you to enjoy full-length motion pictures with “at-the-movies” picture and cinema quality sound.  
Your new player also supports CD, MP3, and WMA.Your player also has several unique features, including AFF  
(Active Full Screen Function that allows you to view wide screen movie presentations in full screen mode), S-  
Video and component video output with Progressive Scan (for greater picture clarity), Parental Control (to  
prevent children from viewing inappropriate content) and Kodak Picture CD compatibility (so you can view photos  
on your TV). This is a true multimedia machine designed for the multimedia world to enjoy.  
R
E
A
D
A
B
L
E
Notes on Discs  
HOW TO HANDLE, CLEAN, AND STORE DISCS.  
HANDLING DISCS  
• Do not touch the playback side of the disc.  
• Do not attach paper or tape to discs.  
NOTE: The dealer shall not be responsible for damage that may occur to a disc from being operated in the player.  
CLEANING DISCS  
• Fingerprints and dirt on the disc cause picture and sound deterioration. Wipe the disc from the center outward with a soft cloth. Always keep the disc clean.  
• If you cannot wipe off the dirt off, wipe the disc lightly with a slightly moistened soft cloth and finish with a dry cloth.  
• Do not use any type of solvent such as a thinner, benzine, commercially available cleaners or anti-static spray for vinyl LP’s.  
STORING DISCS  
PLAYABLE DISCS  
• Do not store discs in places subject to direct sunlight or near heat sources.  
• Do not store discs in places subject to moisture and dust.  
• Store discs vertically in a case. Stacking or placing objects on discs outside of their  
case may cause warping.  
This combo player can playback the following discs.  
Disc Mark  
Contains  
Disc Size  
Maximum playback time  
Approx. 4 hours  
(single sided disc)  
Audio  
+
Video  
(moving  
pictures)  
NOTES ON REGIONAL NUMBERS  
DVD  
video  
disc  
12 cm  
DVDs are divided into separate regions. The United States and Canada are  
designated as region 1 DVD. Your player plays region 1 DVDs only.  
Approx. 8 hours  
(double sided disc)  
TYPE OF TV SYSTEM  
12 cm  
Approx. 74 minutes  
Approx. 20 minutes  
Approx. 600+ minutes  
Connect this combo player to a TV with the NTSC system.  
Audio  
CD  
Audio  
8 cm  
(CD single)  
Note:  
Though every attempt is made to accommodate all  
supported disc technologies, certain discs may not  
playback.  
The OSD and illustration in this manual may be  
somewhat different from the actual situation.  
Please take the unit as the standard.  
MP3  
CD  
Audio  
Spec.  
12 cm  
12 cm  
Kodak  
Picture  
CD  
UNPACKING  
First check and identify the contents of your combo player package, as WHERE TO PLACE YOUR COMBO PLAYER  
listed below:  
VCR&DVD Player  
AUDIO cable(red and white)  
Video cable(yellow)  
Batteries(AAA)  
Remote control  
RF(Radio Frequency)Antenna Cable  
User’s manual  
If any item should be damaged or missing, please inform your dealer  
without delay.  
Keep the packaging materials, you may need them to transport your  
player in the future.  
A. Place the unit on a firm, flat surface.  
1
1
1
2
1
1
1
B. When you place this combo player near a radio, or VCR, the  
playback picture may become poor and/or distorted. In this situation,  
move the combo player away from the other units.  
C. If placed in a cabinet, please allow at least 2.5 cm (1 inch) of free  
space all around the player for proper ventilation.  
TO OBTAIN A CLEAR PICTURE  
The combo player is a precision device. If the optical pick-up lens,  
disc drive parts and head are dirty or worn down, picture quality can  
become poor. We recommend regular inspection and maintenance  
every 1,000 hours of use depending on the operating environment.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Identification of Controls  
FRONT PANEL  
REAR PANEL  
1
2
3
4
5
6
7
8
9
10 11 12 13  
18  
14 15 16 17  
1
2
3
4
5
6
7
8
9
POWER  
1
2
3
4
5
6
7
8
9
10 11  
VIDEO INPUT JACK  
AUDIO INPUT JACK  
RECORD  
1
2
3
4
5
6
7
8
9
DIGITAL AUDIO-OPTICAL OUTPUT  
S-VIDEO OUTPUT  
DIGITAL AUDIO-COAXIAL OUTPUT  
COMPONENT/PROGRESSIVE VIDEO OUTPUT Y Pb Pr  
ANALOG AUDIO OUTPUT L R  
ANALOG AUDIO INPUT L R  
ANALOG AUDIO OUTPUT L R  
COMPOSITE VIDEO OUTPUT  
COMPOSITE VIDEO INPUT  
TV/VCR  
CHANNEL UP/DOWN BUTTON  
VCR DECK  
OPERATION DISPLAY WINDOW  
EJECT  
10 DVD TRAY  
11  
VCR INDICATOR  
12 DVD INDICATOR  
13 DVD/VCR  
14 STOP  
10 RF OUTPUT  
11 ANTENNA INPUT  
15 PLAY/PAUSE  
16 SKIP REVERSE  
17 SKIP FORWARD  
18 OPEN/CLOSE  
Remote Control  
THE DESCRIPTIONS BELOW DESCRIBE THE FUNCTIONS ON THE REMOTE CONTROL.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
POWER  
19. OPEN/CLOSE  
20. ANGLE  
21. I/P (INTERLACE/PROGRESSIVE SCAN)  
22. ZOOM  
23. AFF  
24. DISPLAY  
25. REC  
26. TITLE  
27. ENTER  
28. STOP  
STEP (frame-by-frame slow motion)  
SUBTITLE  
SHUFFLE  
REPEAT  
AUDIO  
A-B REPEAT  
DVD  
1
2
19  
20  
21  
22  
23  
24  
25  
3
4
5
6
7
VCR  
8
9
10. SETUP  
11. MENU  
12. DIRECTION BUTTONS  
12. TRACKING  
29. SKIP REVERSE  
30. SKIP FORWARD  
31. SPEED  
26  
27  
10  
11  
12  
12  
CHANNEL UP/DOWN  
32. TV/VCR  
13. PLAY/PAUSE  
14. FAST FORWARD  
15. FAST REVERSE  
16. PROGRAM  
33. COUNTER/CLOCK  
34. INPUT SEL  
35. CLEAR/RESET  
28  
29  
30  
13  
14  
15  
16  
17  
17. SEARCH  
18. NUMBER BUTTONS  
31  
32  
33  
34  
POWER button on the remote control is for standby power.  
18  
!
• When“  
” displayed on TV, function is not operational on the disc.  
• Child Lock!!!  
Press the POWER button of the remote control for about 8 seconds.  
No buttons of front panel and remote control can be operated now  
35  
and Lock indicator “  
” will be displayed on window display. To  
release child lock, press the POWER button of the remote control for  
about 8 seconds.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
(Continued)  
PREPARING THE REMOTE CONTROL  
To operate the combo player, you must first place the batteries in the remote control.  
2
1
3
Open the cover.  
Insert batteries (AAA size).  
Make sure to match the + and - on  
the batteries to the marks inside the  
battery compartment.  
Close the cover.  
OPERATING WITH THE REMOTE CONTROL  
Operating player with the remote control.  
The remote control must point at the remote sensor in order for  
the remote to function correctly.  
Distance: Maximum of 7 m from the front of the remote sensor.  
Angle: Approximately 30° from each direction.  
*Do not place the remote control under intense light source such as direct  
sunlight.  
3
0
3
0
BATTERIES  
INCORRECT USE OF BATTERIES MIGHT CAUSE THEM TO LEAK, CORRODE OR EXPLODE.  
• Do not place the batteries in the wrong direction.  
• It is dangerous to charge, heat, open, or short-circuit the batteries.  
• Do not leave dead batteries or mix new with old batteries in the remote control.  
• When not using the remote control for a long duration of time, remove the batteries. When operating range becomes reduced,  
replace batteries.  
• If battery leakage occurs, wipe the battery liquid from the battery compartment, then replace batteries.  
REMOTE CONTROL  
• The remote control should be aimed directly towards the remote sensor of the combo player.  
Connecting With TV  
When connecting the RF cable to your TV, set your TV to channel 3 or 4 depending on how your TV was originally set up for video inputs.  
HOW TO CONNECT WITH RF CABLE OR AV CABLE  
1. Using an RF or AV cable, plug one end of the cable into the cable  
TV outlet on your wall and the other end into the "ANT.IN" jack on the  
rear of the Combo Player.  
2. Using another RF or AV cable, plug one end of the cable to the "RF  
OUT" jack on the Combo Player and the other end of the cable to the  
"ANT.IN" jack on your TV.  
3. Using RCA cables, connect the red, white and yellow ends to the  
corresponding color-coded AV OUT jacks on the Combo Player.  
Connect the other end of the RCA cables to the corresponding color-  
coded AV IN jacks on the TV.  
By using RCA cables you will enjoy cleaner audio and video.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting With Other Video Equipment  
HOW TO CONNECT  
1. Using an AV cable, plug one end of the cable to the AV out jack on your camcorder (or other optional equipment) and plug  
the other end into the AV IN jack on the Combo Player (AV IN jacks are on both the front and rear of the Combo Player. The  
rear AV IN jack is AV1 while the front jack is AV2).  
2. Select AV1 or AV2 (depending on which jack your camcorder or other optional equipment is plugged into) by pressing the  
channel + and - buttons.  
Connecting TV With S-VIDEO/Component Jack, AMP With Digital Audio Out jack  
How to Connect (DVD only)  
Connect COAXIAL or OPTICAL to AMP of Dolby Digital.  
Progressive Scan  
WHAT IS PROGRESSIVE SCAN?  
With the introduction of Digital/High-Definition TV, televisions can scan viewable information at double the frequency of standard NTSC  
televisions. This provides for greater picture clarity and detail. This player provides the delivery of images to these newer televisions with  
greater detail and film like quality. Connect the player to your HDTV ready television using the component video inputs/outputs.  
HOW TO SETUP THE VIDEO SCAN MODE?  
Connect this Player with Y, Pr and Pb, if your TV has Progressive Scan & Component Video inputs commonly found on HDTV sets.  
Press I/P button on remote control unit to switch between Interlace & Progressive Scan mode.  
It is forbidden by law to copy, broadcast, show, play in public, and rent copyrighted material without permission.  
DVD video discs are copy protected, and any recordings made from these discs will be distorted.  
Manufactured under license from Dolby Labs.  
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential unpublished works.  
c
1992-1997 Dolby Laboratories, Inc. All rights reserved.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Playback  
1 Press POWER button to power on.  
Press DVD/VCR button to select VCR mode.  
2 Insert the desired tape.  
3 To playback, press  
button.  
If the playback picture is partially noisy, adjust with  
TRACKING +/- button on front panel.  
• Press EJECT button on the front panel or OPEN/CLOSE  
button on remote control to remove the tape  
6 To monitor Video 1, Video 2, or TV, press INPUT SEL. button  
on remote control.  
4 To stop, press  
To pause, press  
5 To playback forward fast or to reverse, press  
button, respectively.  
button.  
button in playback mode.  
o r  
Recording a Television Show  
1. Turn on the Combo Player by pressing the power button.  
2. Press the VCR button to change into VCR mode.  
6. Select the desired channel that you wish to record by using the  
CH+/- buttons on your Player Combo remote.  
7. Press the REC button on your Combo Player's remote to begin  
recording.  
3. Turn on your TV and select channel 3 or select AV input.  
4. Insert a blank tape or a tape that you wish to record over.  
NOTE: VCR tapes have a recording tab that needs to be in place in  
order to record. If the tab is not in place, you will not be able to record  
on the tape and the tape will eject when you push the record button.  
5. Press the Speed button on your Combo Player's remote to select  
the desired recording speed (SP or SLP).  
8. Press  
button to pause recording, press again to resume.  
Recording automatically cancels if the Combo Player is left on pause  
for five minutes.  
9. Press the button to stop recording.  
WATCHING A DVD WHILE YOU RECORD A VHS VIDEOTAPE  
To playback DVD during recording with video, insert a DVD  
disc.  
• Place the desired DVD disc on DVD tray, press DVD button  
to switch into DVD mode and press button.  
COPYING DVD DISCS TO VHS VIDEOTAPE  
1. Press the DVD button to switch to DVD mode.  
2. Insert the DVD disc you wish to record.  
3. Insert a blank tape or a tape you wish to record over.  
4. Press REC button.  
5. To stop copying, press the VCR button and then press the  
button. If you don't, the VCR will continue recording the DVD disc.  
NOTE: This feature will not work with copy protected DVD discs.  
This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other  
intellectual property rights owned by Macrovision Corporation and other right owners Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
begin recording.  
RECORDING FROM DIGITAL CABLE OR SATELLITE  
*Please note: when recording from a digital cable or satellite  
receiver, you will not be able to record one channel and view  
another. The player must by tuned to channel 3 or 4 and the  
digital cable or satellite receiver must be tuned to the desired  
recording channel.  
1. Follow directions 1-5 under "Recording a Television Show".  
2. Turn on your digital cable or satellite receiver and turn the  
receiver to the channel you wish to record.  
3. Press the REC button on your Combo Player's remote to  
ONE TOUCH TIMER RECORDING(OTR)  
One-Touch Recording(OTR) allows you to record in 30- 3 Add Recording Time  
minute increments up to 4 hours at the touch of a button.  
1 Start Recording  
Follow the instructions on “Recording”.  
2 Activate OTR  
Continue pressing REC to add recording time in 30 minute  
increments up to 4 hours.  
•The VCR&DVD PLAYER stops recording automatically when  
the time has elapsed.  
While in Record mode, press the REC button again to activate 4 Press  
button to stop recording mode.  
One-Touch Recording(OTR).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
There are 4 types of search modes you may select to find a segment on your tape.  
Search Function  
3. Press ENTER button at “Go To Zero Search” to start.  
SEARCH COUNTER ZERO  
• As soon as the counter searches 0:00:00 , the tape will play  
automatically.  
• Press DVD/VCR button to select VCR mode.  
1 Press the SETUP button on the remote control.  
2. Press the button to select the “Search”, and press ENTER button.  
SEARCH COUNTER  
3. Press the  
ENTER button.  
4. Enter the desired time and press ENTER button.  
• The counter appears on screen and the LED.  
button to select the “Counter Search”, and press  
•Press DVD/VCR button to select VCR mode.  
1 Press the SETUP button on the remote control.  
2. Press the button to select the “Search”, and press ENTER button.  
searching motion, then press ENTER button.  
4. If your search is backward direction, highlight “Index Search(-)” Index  
searching motion, then press ENTER button.  
SEARCH INDEX FORWARD/BACKWARD  
• Press DVD/VCR button select VCR mode.  
1 Press the SETUP button on the remote control.  
• The index signal is recorded on the tape automatically when the  
recording is started. You can view a recording at a specific start point.  
2. Press the button to select the “Search”, and press ENTER button.  
3. If your search is forward direction, highlight “Index Search(+)” Index  
4. Index NUMBER setting method.  
• If your search is forward direction, press up  
desired Index Number.  
• If your search is reverse direction, press down  
select desired Index Number.  
5 After setting up , Please Press ENTER Button.  
SEARCH INDEX NUMBER  
• Press DVD/ VCR button to select VCR mode  
button to select  
1 Press the SETUP button on the remote control.  
2. Press the  
button to select the “Search”, and press ENTER button.  
button to  
3. Press the  
button to select the “Index Number Search “,  
and press ENTER button.  
VCR Setting  
CLOCK  
• Press DVD/VCR button to select VCR mode and follow the NUMBER button.  
procedures below.  
For DATE SET, follow the order of Month/Day/ Year ; for TIME  
SET, follow the order of Hour/Minute in CLOCK SET screen.  
4 Press SETUP button after completion.  
1 Press the SETUP button on the remote control.  
2 Press the ENTER button, while highlighting CLOCK SET.  
3 Set the current date and time with  
button or  
PROGRAMMING  
1 In VCR mode press the SETUP button on the remote control . 7 Select End time  
• Move into "End Time" with  
button and then, select the  
2 Press the  
ENTER button.  
3 Select “Channel”  
button to select the “Program Set” and press  
desired number to record with Up/down button or number  
button.  
8 Select Tape Speed  
• Move into "Tape Speed" with  
desired speed with the up/down button.  
• Move into desired channel signal with up  
and follow the order below.  
/down  
button  
button and then, select the  
cable  
video 1  
video 2  
Antenna  
• Recording speed will appear in the order shown below.  
SP  
SLP  
4 Select “Start Date”  
• Move into “Start Date “with  
button and then, select the  
• Press SETUP button to exit after completion  
desired number to record with up/down button or number button  
• Press NEXT and PREV button to finish 8-event programming.  
• Press the POWER button to activate timer recording.  
To cancel a program, press the SETUP button, then press the  
button until "Program Set" is highlighted. Press the PREV or  
NEXT buttons on the Combo Player's remote control until you  
get to the program you wish to cancel. Press the CLEAR button  
on your Combo Player's remote control to cancel the  
programming.  
5 Select “REC cycle”.  
• Move into “REC Cycle” with  
desired one with up/down button  
button and then, select the  
• REC cycle changes like the orders.  
One Time weekly weekdays  
Daily  
6 Select Start Time  
• Move into “Start Time” with  
button and then, select the desired  
number to record with up/down button or number button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR Setting  
CHANNEL  
• Operates in stop mode.  
“Add”.  
• Press VCR button to select VCR mode and follow the  
Press NUMBER button and  
select the desired channel to memorize.  
To check the memorized channels, press CH+/- button on  
remote control. To delete Channels Manually, when ENTER  
button is pressed, “Add” converts into “Erase”. Press NUMBER  
/
button of remote control to  
procedure below.  
1 Press the SETUP button on the remote control.  
2 Press the  
button to highlight and select (Enter) the  
“Channel Set”.  
3 Selecting cable or antenna viewing  
You must set the viewing mode for your VCR, choosing either  
CABLE (cable system connection) or ANTENNA(antenna  
connection). To set the viewing mode:  
button and  
/
button on the remote control to select the  
desired channel to delete.  
To check the deleted channels, press CH+/- button on remote  
control.  
5 SELECT “Auto Preset”  
• Press ENTER to toggle between CABLE and ANTENNA.  
4 SELECT “Manual Set”  
• Press  
button in Channel Set to highlight “Auto Preset”  
Move into “Manual set” with  
button to select either add/erase  
• Press ENTER button to detect the channel automatically.  
and press ENTER. Memorize channel and select the desired  
channel when ENTER button is pressed, “Erase” converts into  
ON-SCREEN MENU LANGUAGE  
1 Press the SETUP button on the remote control. The initial ENTER button  
MENU is displayed. 3 Select the language among English, Spanish and French.  
2. Press the  
button to select “Language Select” and press  
SETTING THE OSD DISPLAY  
• Press DVD/VCR button to select VCR mode  
3. Press ENTER button until the appropriate system is  
selected.(“On” or “Off”)  
4. Please press SETUP button to quit.  
1 Press the SETUP button on the remote control.  
2. Press the  
button to highlight and select “Option”, and  
press ENTER button.  
AUTO POWER OFF  
• Press DVD/VCR button to select VCR mode  
3. Press the  
button to select “Auto Power Off”.  
1 Press the SETUP button on the remote control.  
4. Press ENTER button, until the appropriate system is  
selected.(“Yes” or “No”)  
5. Press SETUP button to quit.  
2. Press the  
button.  
button to select “Option”, and press ENTER  
RF OUT  
• Press VCR button to change into VCR mode  
3. Press the  
button to select the “Output Channel”.  
1. Press the SETUP button on the remote control.  
4. Press ENTER button, until the appropriate system is  
selected. ( “CH3” or “CH4” )  
5. Press SETUP button to quit.  
2. Press the  
button to select “Option”, and press  
ENTER button.  
Tape Handling  
1. Do not use the following:  
4. Do not store in the following places:  
-High temperature and humidity  
-Tape with mold  
-Tape stained with juice or attachments  
-Disassembled tape  
-Subject to direct sunlight  
-Near strong magnetic materials such as speakers  
2. Moisture condensation may occur and damage tape.  
Moisture condensation damages the tape. Please use the tape  
after the moisture condensation is disappeared.  
3. After use, store tape vertically.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AFF Function  
WHAT IS AFF?  
AFF stands for Active Full-screen Function. It allows you to fill the television screen viewing area when using a wide screen formatted  
DVD. Press the AFF button on your remote control, as this will eliminate black bars on the top & bottom of the TV screen when viewing  
movies with an aspect ratio of 1.85:1 and minimize (but not eliminate) black bars on movies with a wider aspect ratio (2.35:1).  
After AFF  
Before AFF  
Playing Back a Disc  
HOW TO PLAYBACK A DISC.  
BASIC PLAYBACK  
How to playback DVD video discs.  
• Turn on the TV and select the video input source connected to the combo player.  
1. Press the POWER button on the front panel. Press DVD  
button of remote control to select DVD mode.  
2. Press the OPEN/CLOSE button.  
3. Place the disc on the disc tray.  
Be sure the graphics side is up and playback side is faced  
down.  
4. Press the  
button.  
This will open the disc tray.  
NOTICE:  
• A disc may be damaged if not correctly placed on the guides in the disc tray. This may also cause the combo player to malfunction.  
• The menu screen will appear automatically or you may access the menu screen by pressing the TITLE button.  
• Moving the combo player during playback may cause damage to the disc as well as the player.  
To open and close the disc tray, you should only use the OPEN/CLOSE button on the remote control or combo player.  
depending on the TV used with the combo player. To control  
picture noise, reduce the sharpness adjustment on your TV  
when viewing DVD discs.  
FOR A HIGHER QUALITY PICTURE  
The DVD discs produce a high resolution picture with  
abundance of information. This may cause some picture  
noise on the TV during playback. The noise will vary  
HOW TO START PLAYBACK FROM THE MENU SCREEN  
ABOUT DVD, CD  
DVD, CD icons will appear depending on the disc being  
played back.  
1. Press  
or the number buttons to select the title.  
2. Press the ENTER button.  
The combo player will start playback from the title selected.  
DVD: DVD video discs  
CD: Audio CDs  
HOW TO PAUSE PLAYBACK (STILL PLAYBACK)  
HOW TO REMOVE THE DISC  
Press the OPEN/CLOSE button.  
Press the  
during playback.  
Wait until the disc tray is completely open before removing any discs.  
After removing the disc, press the OPEN/CLOSE button to close the  
disc tray.  
Press the  
button to resume normal playback.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back a Disc  
(Continued)  
NOTICE:  
HOW TO STOP PLAYBACK  
Press the STOP button once.  
The combo player is stopped.  
At the completion of each movie a menu screen will appear. Be  
aware that the on-screen setup menu may damage your TV by  
permanently burning that image onto the screen. To avoid this,  
press the STOP button at the completion of each movie. You  
may also decide to setup the SCREEN SAVER.  
Press the  
button to replay.  
Press the STOP button twice.  
The combo player is stopped completely.  
ADVANCED PLAYBACK  
The combo player allows you to playback discs at various speeds.  
TV SCREEN  
2x  
4x  
4x  
8x  
8x  
16x  
16x  
2x  
NOTICE:  
PLAYING AT 2X, 4X, 8X, OR 16X THE NORMAL  
• The combo player may not playback sound during scan  
reverse or forward playback of DVD video discs. The combo  
player will play sound during fast forward or fast reverse  
playback of audio CDs.  
• The speeds may vary slightly from disc to disc and the 2x, 4x,  
8x, and 16x speeds are only approximate speeds.  
SPEED  
You can play back a disc at 2x, 4x, 8x, or 16x the normal speed.  
Press the REW or FF button during playback.  
The playback speed becomes 2x the normal speed.  
The playback speed changes each time you press the REW or  
FF button.  
REW: Fast reverse  
FF: Fast forward  
Press  
to resume normal playback.  
NOTICE  
PLAYING IN SLOW-MOTION  
• During the slow-motion playback, the sound may not be heard.  
• Some discs do not utilize this feature.  
A disc can be played back in slow-motion.  
Press the  
Press  
or  
button during pause.  
button to resume normal playback.  
NOTICE  
RESUMING PLAYBACK FROM THE SAME  
• The following action will cancel the RESUME function:  
- Powering off the combo player after you stop playback.  
- Ejecting the disc.  
• Depending on the disc, you may experience a different  
location where playback resumes.  
LOCATION  
This combo player allows you to stop playback and continue  
playback later from the same location on the disc.  
1. Press the STOP button  
This will interrupt the playback and the combo player will  
memorize the location where you stopped playback.  
• Certain discs do not utilize this feature.  
2. Press the  
button  
The combo player will resume the playback from the location  
where you stopped playback.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating a Specific Title, Chapter or Track  
THE DVD VIDEO DISCS ARE NORMALLY DIVIDED INTO TITLES. THE TITLES ARE SUB-DIVIDED INTO CHAPTERS. MOREOVER,  
AUDIO CD AND MP3 CD ARE DIVIDED INTO TRACKS. YOU CAN CONVENIENTLY LOCATE ANY SPECIFIC TITLE, CHAPTER, OR  
TRACK WITH THIS COMBO PLAYER.  
Chapter 1  
Chapter 2  
Chapter 1  
Chapter 2  
Chapter 3  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
TITLE 1  
TITLE 2  
DVD Video Disc  
Audio CD  
This will cause the combo player to start playback  
from chapter 1 of the title selected.  
NOTICE  
LOCATING A TITLE USING THE TITLE MENU  
Locate a specific title using the title menu function,  
provided a DVD video disc contains a title menu.  
1. Press the TITLE button  
You may find that some discs will not respond to this function.  
• If different instructions appear on the TV screen, follow those  
instructions. The instructions above are describing the basic  
procedure. Procedures may vary depending on the contents of  
the DVD video disc.  
On the TV screen, the title menu will appear.  
2. Press the  
want.  
buttons to select the title you  
You can also directly locate a specific title by pressing  
its assigned number with the number buttons.  
3. Press the ENTER button  
LOCATING A SPECIFIC CHAPTER OR TRACK  
This combo player allows you to locate consecutive chapters  
or tracks.  
starts playback from the beginning of the proceeding chapter  
or track.  
Press the SKIP  
requested chapter or track.  
The combo player starts playback from the selected chapter or starts playback from the beginning of the succeeding chapter  
or  
button repeatedly to display the How to locate succeeding chapters or tracks  
• When you press the SKIP button, the combo player  
track.  
or track.  
How to locate preceding chapters or tracks  
• When you press the SKIP  
On certain discs the titles may not display the sub-divided  
chapters.  
button, the combo player  
3. Move the cursor to select Audio, Subtitle, Angle, TT Time,  
CH Time, Repeat, Time Disp..  
LOCATING A TITLE  
You may also locate a specific title by directly selecting a title  
number.  
NOTICE  
1. Press SEARCH button during playback.  
The menu will appear.  
2. Press direction buttons and numbers to select the title and  
chapter you want.  
• The displays may vary depending on the discs.  
You may experience a difference in TITLE or MENU display.  
Using the On-Screen Display  
THE COMBO PLAYER ALLOWS YOU TO VIEW THE OPERATIONAL STATUS AND DISC INFORMATION ON YOUR TV SCREEN.  
CHECKING THE OPERATIONAL STATUS  
With this function you can view on your TV the following:  
-Current title  
-Track number  
-Total playing time  
Press DISPLAY during playback.  
Press DISPLAY repeatedly until  
DISPLAY OFF appears on TV screen.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Repeatedly  
THIS COMBO PLAYER ALLOWS YOU TO PLAYBACK A SPECIFIC TITLE, CHAPTER, TRACK, OR SEGMENT REPEATEDLY.  
(TITLE REPEAT, CHAPTER/TRACK REPEAT, A-B REPEAT).  
HOW TO REPEAT A TITLE, CHAPTER, OR TRACK  
1. select the title, chapter, or track you want to repeat.  
2. Press the REPEAT button.  
The repeat mode changes each time you press the REPEAT  
button.  
HOW TO REPEAT A SPECIFIC SEGMENT  
1. Press the A-B RPT button at the beginning of the  
segment in which you want to repeat playback. (point A)  
2. Press the A-B RPT button again at the end of the  
segment (point B).  
The combo player will automatically return to point A and  
start to repeat playback of the selected segment (A-B).  
3. Press the A-B RPT button to cancel the A-B  
repeat function.  
Repeats the same chapter.  
Chapter  
Repeats the same title.  
Title  
Repeats the disc.  
All  
The combo player will resume to normal playback.  
A
No repeats.  
AB  
DVD video disc  
NOTICE:  
• Depending on the disc, you may experience a difference between point A and the location where playback actually resumes.  
• Be aware that some discs will not respond to the A-B repeat function.  
Playing in Random Order  
THIS COMBO PLAYER ALLOWS YOU TO PLAYBACK TITLES, CHAPTERS WITHIN A TITLE, OR TRACKS IN RANDOM ORDER. (RANDOM PLAYBACK)  
2. Press the SHUFFLE button again during random playback  
to resume normal playback.  
PLAYING TITLES IN RANDOM ORDER  
This combo player will automatically choose the titles in a  
DVD video disc and play them back randomly.  
1. Press the SHUFFLE button .  
NOTICE:  
• The combo player will go to another chapter or track and start  
The combo player will now start random playback.  
playback if you press the SKIP  
button during random playback.  
Zooming a Picture On DVD  
ZOOMING A PICTURE  
This combo player allows you to zoom into a picture as well as shift the zoom point.  
2x  
3x  
4x  
1/3  
1/4  
1/2  
Press ZOOM during playback.  
The combo player magnifies in the center of the picture.  
If you press  
during zoom playback, the zoom point will shift.  
Press ZOOM repeatedly during zoom playback until the player resumes normal playback.  
Selecting Subtitles  
THIS COMBO PLAYERALLOWS YOU TO DISPLAY THE SUBTITLES FROM THOSE INCLUDED ON THE DISC, ON TO YOUR TV SCREEN.  
HOW TO DISPLAY SUBTITLES  
You have the option to select a preferred subtitle from those included on the DVD video disc.  
Press the SUB-T button during playback.  
Subtitle  
01/02 : English  
02/02 : French  
Subtitle  
Press the SUB-T during playback until SUBTITLE OFF appears.  
NOTICE  
Subtitle Off  
• With some DVDs, you may not be able to turn off the subtitles and they will appear on screen automatically.  
• As you press the SUB-T button, the subtitles may not appear immediately during some scenes.  
• If the subtitles continue to show on your TV even after the DVD has been turned off, please  
refer to the TV’s close caption settings.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing in a Favorite Order  
COMBINE YOUR FAVORITE TITLES, CHAPTERS, OR TRACKS AND PLAY THEM BACK IN ANY ORDER.(PROGRAM PLAYBACK)  
HOW TO SET TITLES, CHAPTERS, OR TRACKS IN A FAVORITE ORDER  
The program playback function will automatically playback titles, chapters or tracks in the order preprogrammed.  
1. Insert a disc, then press the PROGRAM button.  
3. Select START from the menu, then press the ENTER  
button.  
At this time, the menu will appear.  
The combo player starts memory playback.  
Program: TT(XX) CH(XX)  
01 TT: CH:  
02 TT: CH:  
03 TT: CH:  
04 TT: CH:  
05 TT: CH:  
06 TT:  
07 TT:  
08 TT:  
09 TT:  
10 TT:  
CH:  
CH:  
CH:  
CH:  
CH:  
To CHANGE the programmed item:  
Press the STOP button, then follow step 1.  
To CANCEL the programmed item:  
Press the STOP button, then press the  
button.  
Exit  
NEXT  
• When the combo player is turned off, or if the disc is removed,  
the program item will be removed.  
• Depending on the disc, the program playback may not function.  
2. Using the numbered button, select the items in the order  
you want them programmed in.  
Program: TT(XX) CH(XX)  
01 TT:05 CH:12  
02 TT:02 CH:07  
03 TT:04 CH:07  
06 TT: CH:  
07 TT: CH:  
08 TT: CH:  
09 TT: CH:  
10 TT: CH:  
Start NEXT  
04 TT:  
05 TT:  
CH:  
CH:  
Exit  
To clear the numbers that you have programmed in just now, press CLEAR button.  
Selecting The Camera Angles/ Languages / Audio Settings  
THIS COMBO PLAYER ALLOWS YOU TO SELECT FROM SEVERAL DIFFERENT ANGLES AND LANGUAGES.  
HOW TO CHANGE THE CAMERA ANGLE  
Press the ANGLE button while playing back a scene recorded with multiple angles.  
Each time you press the ANGLE button, the angle will change.  
1/2  
2/2  
NOTICE  
Selecting the camera angle  
• The angle function will not work on DVD video discs that do not contain recorded multiple angles.  
• The angle icon indicator will illuminate while playing back a title that contains at least one scene recorded with multiple angles.  
HOW TO SELECT A PLAYBACK AUDIO SETTING  
Audio  
1/3  
:
AC3 5.1CH  
English  
Language  
This combo player allows you to select a preferred language and sound recording system from  
those included on the DVD video disc.  
Total Audio Channels  
Current Audio Position  
1. Press the AUDIO button during playback.  
2. Press the AUDIO button again to cycle backwards.  
NOTICE  
• The player returns to the initial default settings, when you turn on the combo player or replace a disc.  
Audio  
2/3  
:
:
AC3 5.1CH  
AC3 5.1CH  
AC3 5.1CH  
French  
Audio  
Audio  
3/3  
Spanish  
English  
1/3  
:
Selecting a language  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Operation  
WHAT IS MP3?  
MP3 refers to a format of music files available for playback over the internet.  
PLAYING An MP3 FORMAT  
1. To pIay you must view through your television. Insert an MP3 CD, the combo player will  
initialize the disc when the tray is closed and the directory (folder) will be shown in an MP3  
MENU on screen.  
2. Press  
then the  
key to select and highlight an MP3 file (song).Press ENTER to play.  
WMA Operation  
WHAT IS WMA?  
WMA refers to a new format of music files from Microsoft available for playback from WMA web sites. The compression used allows you to  
record from your computer up to 22 hours of music on CD-R and play back through your combo player.  
PLAYING A WMA FORMAT  
1.To pIay you must view through your television. Insert a WMA CD, the combo player will initialize the disc  
when the tray is closed and the directory (folder) will be shown in a WMA MENU on screen.  
2.Press  
then the  
key to select and highlight a WMA file (song). Press ENTER to play.  
Playing Back Your Kodak Picture CD/JPEG  
NORMAL  
When a Kodak Picture CD/JPEG is inserted, an automated slideshow is launched, each picture in the current directory will be displayed  
consecutively in a slideshow fashion and will be scaled to fit most of the TV screen. Fifteen slideshow transition modes are provided. Use  
PROGRAM” key to select: Customers can set “transition” effects for every picture at any time during the slideshow.  
NONE:(by default)  
mode 1: WIPE TOP  
mode 2: WIPE BOTTOM  
mode 3: WIPE LEFT  
mode 9: EXTEND FROM CENTER H  
mode 10: EXTEND FROM CENTER V  
mode 11: COMPRESS TO CENTER H  
mode 12: COMPRESS TO CENTER V  
mode 13: WINDOW H  
mode 4: WIPE RIGHT  
mode 5: DIAGONAL WIPE LEFT TOP  
mode 6: DIAGONAL WIPE RIGHT TOP  
mode 7: DIAGONAL WIPE LEFT BOTTOM  
mode 8: DIAGONAL WIPE RIGHT BOTTOM  
mode 14: WINDOW V  
mode 15: WIPE FROM EDGE TO CENTER  
RANDOM  
To display an image indefinitely, press the  
key. To view the Next or Previous picture press the SKIP FORWARD or SKIP REVERSE key.  
IMAGE ROTATION  
There are four modes to rotate a picture: “Invert”, “Mirror”, “Left”, and “Right”. These operations are allowed only when a picture is being displayed  
normally, and will be cancelled automatically when a new picture is displayed. The direction buttons are used to select the different transformation  
modes:  
Up  
Down  
-Invert/Normal  
-Mirror/Normal  
Left  
Right  
-Turn left  
-Turn right  
ZOOM  
This features allows you to view a picture at 50%-200% in several increments. Press the ZOOM button. An on screen message (“Zoom 100%”)  
will verify your selection. Use  
and  
keys to control the zoom level. Press the direction keys to move the picture in any direction. .  
Note: When in the ZOOM mode, the slideshow transition and image transformation features are disabled.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the Parental Lock  
YOU CAN USE THE PARENTAL LOCK FUNCTION ONLY WITH DVD VIDEO DISCS EQUIPPED WITH THE  
PARENTAL LOCK FEATURE.  
SETTING THE PARENTAL LOCK  
DVD video discs equipped with the parental lock function are rated according to their content. The contents allowed by a parental lock  
level and the way a DVD video disc can be controlled may vary from disc to disc. For example, if the disc allows, you can edit out violent  
scenes unsuitable for children and replace them with more suitable scenes, or lock out playback of the disc all together.  
1. Press STOP twice during playback.  
TO CHANGE YOUR PASSWORD:  
2. Press SETUP  
The SETUP MENU appears on the TV screen.  
1. Follow step 3 to select password, select Change.  
2. Enter old password.  
3. Enter new password.  
4. Re-enter to confirm your new password.  
5. Press ENTER.  
6. Press SETUP.  
3. Select Preference Page, press ENTER.  
4. Select PARENTAL, press direction buttons.Select  
Parental, press ENTER.  
5. Enter your password then press ENTER.  
The preset password is 3308  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Function Settings  
THIS COMBO PLAYER ALLOWS YOU TO CUSTOMIZE THE PERFORMANCE TO YOUR PERSONAL PREFERENCE.  
DISPLAYING THE SETUP MENU SCREEN  
The SETUP MENU screen asks you to select a setting category from General Setup, Speaker Setup, Dolby Digital Setup, Video  
Setup and Preferences. The selected category will provide you the setting details on-screen.  
1. Press SETUP.  
2. Press  
to select category (highlight), then press ENTER.  
3. Press SETUP to exit.  
--Video Setup Page--  
--Preference Page--  
--General Setup Page--  
--Speaker Setup Page--  
Downmix  
--Dolby Digital Setup--  
Dual Mono  
Dynamic  
Sharpness  
Brightness  
Contrast  
Low  
00  
00  
Audio  
ENG  
Off  
TV Display  
Angle Mark  
OSD Lang  
PS  
On  
ENG  
Subtitle  
Disc Menu  
Parental  
Password  
Default  
ENG  
LT/RT  
Stereo*  
SPDIF Output RAW  
Stereo*  
Captions  
Screen Saver  
Off  
On  
L-Mono  
R-Mono  
Mix-Mono  
Normal /PS*  
Normal /LB  
Wide  
High  
Medium  
Low*  
English*  
FULL  
French  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Thai  
*
3
1
1
/
/
/
4
2
4
English  
French  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Thai  
On*  
Off  
OFF  
English*  
-20  
0
+20  
+16  
French  
Spanish  
English*  
French  
Spanish  
Chinese  
Japanese  
Korean  
Russian  
Thai  
-16  
0
Off*  
SPDIF Off  
SPDIF/RAW*  
SPDIF/PCM  
1 KID SAFE  
2 G  
3 PG  
On  
Off*  
4 PG-13  
5 PG R  
6 R  
7 NC-17  
8 ADULT*  
Off  
On*  
Off  
Old Password  
New Password  
Confirm PWD  
OK  
Change  
Reset  
NOTICE  
• Preset password is 3308 .  
•The SETUP MENU screen disappears if you press the SETUP button while it is displayed.  
•Any button can disable Screen Saver except the POWER button. After that,you can press some button to make the relative operation.  
• Functions and menu are subject to change without notice.  
You must remove any/all disc from the player in order to access Preference Page.  
* Factory defaults  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
SYMPTOMS & CORRECTION  
• Connect the power plug into the wall outlet securely.  
• Check if the child lock is released.  
No power  
• Check if the power plug is connected to an AC outlet.  
• Check the batteries in the remote control.  
• Aim the remote control directly at the remote sensor. If necessary, remove all of the obstacles between the  
sensor and the remote.  
The player does not respond  
to the remote control.  
D
V
D
You have to be within 7m of the player.  
• Verify the connection from the video output of the player to the TV video input. Then switch TV to  
appropriate mode.  
No picture  
• Connect the video cable into the jacks securely. Refer to your television owners manual.  
• Verify the video connection between your TV and the Combo Player. Make sure your TV channel is set to  
channel 3 or AV INPUT. For more details, refer to your TV manual.  
V
C
R
Have sound but no picture  
No sound  
• Press I/P button on the Combo Player's remote control.  
• Connect the audio cables into the jacks securely.  
• Verify the connection from the DVD audio output to the TV or receiver audio input. Then switch to the  
appropriate source on the receiver. Refer to your audio amplifier owners manual.  
• Check if the player is in VCR mode or DVD mode.  
• Check if the player is in counter status. Press the COUNTER/CLOCK button to switch.  
LED no playtime display  
Timer recording failure  
• Make sure the timer recording is set correctly.  
• Make sure power is off.  
• Make sure the DVD/VCR is set correctly.  
Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with scotch tape.  
Playback picture is partially  
• Adjust tracking control for a better picture by pressing the TRACKING +/- button.  
noisy  
Cannot view a tape but the  
• Head cleaning may be necessary.  
audio is OK.  
V
C
R
• Select channel 3 or 4 on your TV.  
No or poor playback picture  
• Fine tune your TV.  
TV programs cannot be seen • Check the ANT.IN and RF OUT connections.  
normally.  
• Press the VCR button on the remote control.  
Video or color fades in and  
out when making a copy of a You cannot copy a copyrighted video tape. You are experiencing copy guard protection.  
video tape.  
Cannot remove the tape  
Black & White picture  
• Check if the player is in the VCR mode. If not, press the VCR button to switch the mode.  
• Damaged S-Video connector (bent pin)  
• A small amount of picture distortion may appear because of a poor quality video/sound transfer to disc.  
This is especially true of some discs manufactured between 1997-1998.  
• Scratched disc  
The playback picture has  
occasional distortion  
Brightness is unstable or  
noises are produced on  
playback pictures  
• Connect the player directly through the TV and not through any other source. What you’re viewing is the  
effect of the copy protection circuitry required on all DVD players.  
D
V
D
• Place the disc with the graphics side up.  
• Place the disc on the disc tray correctly inside the guide.  
• Make sure the disc is free from scratches & fingerprints.  
• Press the SETUP button to turn off the menu screen.  
• Cancel the parental lock function or change the parental lock level. (The Pre-set password is 3308.)  
• Turn the power off then disconnect the power plug and reinsert it back into the wall. Retry again.  
• Use region 1 discs only.  
The combo player does not  
start playback  
MP3 won’t read disc or it  
skips  
• Reburn disc as the software edition used may not be compatible with the player. Check web site for  
instruction.  
If our troubleshooting guide doesn't help, give us a call. For service, support and warranty information, visit  
WARNING: Opening the back cover of your Combo Player will void the warranty.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power supply  
120V~ 60 Hz  
Power consumption  
Weight (Approx.)  
External dimensions  
Signal system  
25W  
5.4 kg  
430 x 91 x 355.5 mm (W/H/D)  
NTSC  
Operative temperature  
Installation condition  
Received channels  
RF Input/output  
Video input  
+5°C~35°C  
Horizontal/Relative humidity under 80%  
VHF:2-13 CH / UHF:14-69 CH/Cable:1-125  
U/V-mixed:75  
1.0 V (p-p), 75  
unbalanced  
unbalanced RCA JACK  
Audio input  
-8.8 dBm,RCA JACK  
3 or 4 CH  
RF output  
Video output  
1.0 V (p-p), 75 ohms RCA JACK  
(Y) 1.0 V (p-p), 75 ohms negative sync., Mini DIN 4-pin x 1  
(C) 0.286 V (p-p), 75 ohms  
S video output  
(Y)1.0V (p-p), 75 ohms  
(Pb)0.7V (p-p), 75 ohms  
(Pr)0.7V (p-p), 75 ohms  
Component video output  
Audio output(DVD analog audio)  
Audio output(VCR analog audio)  
Playable tape  
1.8+0.2V(p-p)(rms),10k ohms, pin jack(L,R)x 1  
-8.8 dBm,RCA JACK  
Very high dense tapes with VHS marks  
SP:33.35mm/s, SLP:11.12mm/s  
SP:2hrs, SLP:6hrs(use of T-120 tape)  
12 hrs AM/PM  
Tape speed  
Playtime  
Clock display  
FF/REW time(VCR)  
<220 seconds (T-120 tape)  
Memo On Output Sounds  
DISCS AND OUTPUT SOUNDS  
DVD Video Discs  
CD  
MP3 CD  
Sound recording  
system  
Linear PCM  
Dolby Digital  
MPEG 2  
MP3  
PCM44.1kHz  
48kHz  
96kHz  
SPDIF  
/PCM  
SPDIF  
/PCM  
ANALOG  
ANALOG  
ANALOG  
SPDIF  
/RAW  
SPDIF ANALOG SPDIF SPDIF  
SPDIF  
SPDIF  
SPDIF  
/RAW  
Audio setting on  
the setting screen  
ANALOG  
ANALOG  
/RAW  
SPDIF  
/PCM  
/RAW /PCM  
/RAW  
SPDIF  
/PCM  
/RAW  
SPDIF  
/PCM  
___  
ANALOG  
AUDIO OUT jacks  
___  
___  
__  
__  
___  
___  
___  
o
___  
o
o
o
o
o
PCM  
(48kHz)  
MPEG 2  
bitstream  
PCM  
(48kHz)  
PCM  
(48kHz)  
PCM  
(44.1kHz)  
PCM  
(44.1kHz)  
DIGITAL  
AUDIO OUT jack  
Dolby  
Digital  
bitstream  
___ ___  
PCM  
(48kHz)  
__  
__  
___  
___  
__  
MPEG 1 AUDIO LAYER 3 DISC (MP3)  
MP3 Audio Disc Play Back Capable MP3 audio disc can be played back by operating the unit in the  
same way as the audio CD.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
For service, support and warranty information, visit www.polaroidelectronics.com or in the  
US call 1-866-289-5168, in Canada call 1-866-301-7922 and in Mexico call 01-800-400-  
2443.  
“Polaroid” is a registered trademark of Polaroid Corporation of Waltham, MA USA and  
licensed for use on the DVC-2010 to Petters Consumer Brands, LLC.  
French  
Pour les informations concernant l’entretien, l’assistance et la garantie, visiter  
www.polaroidelectronics.com ou appeler le 1-866-289-5168 aux États-Unis et le 1-866-301-  
7922 au Canada. Au Mexique appeler le 01-800-400-2443.  
«Polaroid» est une marque déposée de Polaroid Corporation, Waltham, MA, États-Unis, et  
dont l’usage est autorisé pour le DVC-2010 auprès de Petters Consumer Brands, LLC.  
Spanish  
Para información relacionada al mantenimiento, soporte y garantía, visite  
www.polaroidelectronics.com o, en los Estados Unidos, llame al 1-866-289-5168. En  
Canadá, llame al 1-866-301-7922. En México llame al 01-800-400-2443.  
“Polaroid” es una marca registrada de Polaroid Corporation, Waltham, MA, USA. Petters  
Consumer Brands, LLC, ha sido autorizado para usarla en el DVC-2010.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Pelco Car Video System PMCL317A User Manual
Pelco Security Camera PT780 24P User Manual
Perle Systems Network Router S 10G STS User Manual
Philips Coffeemaker HD8743 User Manual
Philips DVD VCR Combo DVP3345V User Manual
Philips Wheelchair NT9105 User Manual
Polycom Universal Remote EF IR11 User Manual
Premier Mounts Projector Accessories GB PIPE1 User Manual
Prince Castle Kitchen Utensil 965 B User Manual
PYLE Audio Music Mixer PYD1955 User Manual