DVD Player
DVP 0600
Operation Manual
- 1 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNING: To reduce the risk of fire or
electric shock, DO NOT expose this product
to rain or moisture.
The lighting flash with arrowhead symbol within a triangle
alerts the user to “dangerous voltage” which could cause electric shock.
The exclamation point within a triangle alerts the user to read important operating
and maintenance instructions in the manual.
IMPORTANT FOR LASER PRODUCTS
CLASS 1 LASER PRODUCT
1. DANGER: Visible laser radiation when
open and interlock failed or defeated. Avoid
direct exposure to beam.
2. CAUTION: Do not open the top cover.
There are no user service-able parts inside
the unit, leave all servicing to qualified
service personnel.
NOTES
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9)
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of
time.
14) Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
- 3 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
DUAL COMPATIBILITY
■
VIDEO OUT
Supports both “Progressive scan” and Standard Video, S-Video and easy
“Interlaced” televisions.
PAL/NTSC shift.
AUDIO OUT
2CH and 5.1CH analog audio output,
Progressive Scan creates a picture signal
■
with double the scan lines of
a
conventional DVD, resulting in higher optical and coaxial digital audio output
picture resolution and sharper image can be connected to any amplifiers.
quality.
GENERAL FUNCTIONS
HIGH QUALITY PROPERTIES
DIVX FUNCTIONALITY
■
COMPATIBILITY
DVD, CD, CD-R, CD-RW, MP3 and DivX
discs compatible.
■
Plays DivX5, DivX4, DivX3 and DivX
■
ZOOM FUNCTION
Video Content. (In compliance with DivX If desired, the picture can be enlarged to
Certified Technical Requirements).
further enhance your enjoyment.
ALL PLAYBACK FUNCTIONS
■
The maximum bit rate supported is 4
Mbit/s. The average bit rate is 2 Mbit/s.
Fast forward and reverse
Slow playback
■
HIGH RESOLUTION
Frame playback
MPEG2 decoding format to achieve Repeat playback
horizontal resolution more than 500 lines. Program playback
EXCELLENT TIMBRE SEARCH BY TIME
■
■
Build-in Dolby Digital decoder to output Search for scenes by times; ideal for
digital audio signal to reproduce high finding your favorite scenes.
quality sound effects.
SCREEN
Supports 4:3 and 16:9 aspect ratios.
SPECIAL FUNCTION
■
LAST MEMORY PLAYBACK
■
Continue playing from the last point you
stopped.
■
Supports multi-angle and multi-language
playback for enjoying unique video
features.
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
About Discs
Disc Formats Supported by this Player
The unit can play discs bearing any of the following logos:
PLAYBACK TIME/
PLAYABLE SIDES
DISC LOGO
DIAMETER
133 min SS-SL
242 min SS-DL
266 min DS-SL
484 min DS-DL
DVD
CD
12cm
12cm
74 min
8cm
20 min
MP3
12cm
600 min
DIVX
12cm
The operating method of some DVD discs is specified by the software maker.
Please refer to the instruction manual of the disc.
The DVD Player will play most recordable (CD-R) or erasable (CD-RW) CDs, but
playback of CD-R or CD-RW discs created on a computer requires proper
formatting and finalization of the disc for audio playback. Some computers and/or
software programs may not be capable of creating compatible discs.
About Disc Terms
-
Title
Generally, pictures or music compressed on a DVD are divided into several sections,
“title”.
-
Chapter
The smaller section unit of picture or music in a DVD under the title, usually one title
is comprised of one or more chapters and each of them is numbered for easy
searching. But some discs may not have a recording chapter.
Track
-
A segment of picture or music on a CD. Each track is numbered for searching.
- 5 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Care of Discs
How to hold discs
Cleaning Care
When loading or removing discs, try not
to touch their playing surfaces.
Use a soft, dry cloth for cleaning. For
stubborn dirt, soak the cloth in
a
detergent solution; ring well first and
wipe. Use a dry cloth to wipe it dry. Do
not use any volatile agents such as
benzine or paint thinner, as they may
damage the surface of the player.
Cleaning
Lens cleaner
Fingerprints or other dirt on the disc
may affect sound and picture quality. To
clean your discs, use a soft clean cloth
to wipe them. If necessary, moisten a
soft cloth with diluted neutral detergent
to remove heavy dirt or fingerprints.
The player’s pickup lens should not
become dirty under normal use, but is
for some reason it should malfunction
due to soiling, contact your nearest
WACA authorized service center. Lens
cleaners are commercially available, but
special care should be exercised in their
use since some may cause damage to
the lens.
Do not wipe in
a
circular direction
(Concentric scratches in the disc groove
tend to cause noise.) Gently wipe from
the inside to the outer edge.
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Elements of Operation – Front Panel
1. Standby-on button
-Press to turn off the power.
2. Remote sensor
-Receiving remote control signal for
operation.
7. STOP button
-Press to stop playback.
8. PREV button
-Press to select the previous track or
menu page.
3. Display panel
9. NEXT button
-Indicates the current status of the
unit.
-Press to select the next track or
menu page.
4. Disc tray
10. MENU button
-Used to load disc
-Press to display/close the menu.
5. EJECT button
-Press to open/close the disc tray.
6. PLAY button
-Press to begin the playback of the
inserted disc.
Display Panel
9.
- 7 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
1. 5.1CH Audio output jacks
2. 2CH Audio output jacks
6. Video output jack
7. Component (Y/Y, Pb/Cb, Pr/Cr)
output jacks
3. Coaxial digital audio output jack
4. Optical digital audio output jack
5. S-video output jack
8. Switch between progressive and
interlace scan
9. Power-supply cord
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Handset Button Functions
1. Power
5. 10
-Press to turn the DVD player on or off.
2. Angle
-Used corporately with 0-9 number
buttons to select the track number more
than nine numbers.
-Press to access various camera angles
(if the DVD contains multiple camera
angles).
6. Menu
-Press to display/close the disc menu
on the TV screen in Play mode.
7. Direction buttons (◄/►▲/▼)
-Used to select menu items or settings.
8. Setup
3. Audio
-Press to access various audio
languages (if the DVD contains multiple
audio languages).
4. 0-9 Number buttons
-Select numbers by pressing these
buttons.
-Press to access the DVD player’s setup
menu.
- 9 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control Handset Button Functions
9. Pause/Step
19. Title
-Press to pause playback or step frame
by frame.
-Press to display titles if present on the
DVD disc.
-Press PLAY button to resume normal
playback.
20. Enter
-Press to confirm after selection.
21. Zoom
10. Reverse ꢀ
-Press to search backward.
11. Forward ꢁ
-When a DVD disc is playing, press this
button to activate zoom.
22. Stop
-Press to search forward.
12. Program
-Press to stop playback, press the
PLAY button to resume normal
playback.
-Allow you to play the disc in
a
programmed sequence for certain discs
(The button is not available for DVD,
MP3 and JPEG discs).
-Press the STOP button twice
repeatedly to stop playback.
23. Play
13. Slow
-Press to activate slow forward or slow
rewind.
-Press to begin playback.
24. Next Skip/Scan
14. Display
-Press to skip to the next chapter/track.
25. Previous Skip/Scan
-Press to skip to the previous
chapter/track.
-Press to show the elapsed, remain
playback time. Press to cancel on the
screen text.
15. Eject
26. Repeat
-Press to open or close the disc tray.
16. P/N
-Press to repeat a chapter, track, title, or
all content (not available for MP3 and
JPEG discs).
-Press to select the TV system.
17. Subtitle
27. A-B Repeat
-When a DVD disc is playing, press to
select a subtitle language.
18. Search
-Press to mark a segment to repeat
between A and B.
28. Volume Up/Down
-Allow you to select the desired disc
starting time.
-Press to increase or decrease the
playing disc sound volume level slightly.
-In DVD status, press to select the
playback chapter or title (if the DVD
contains multiple titles or chapters).
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage of the Remote Control
Battery Installation
● Do not mix old and new batteries.
● Wipe away any leakage inside the
remote control unit, and install new
batteries.
Insert the batteries supplied while
observing the correct (+) and
polarities.
(
)
● If leakage should come into contact
with your skin, immediately wash it off
thoroughly with water.
● Batteries contain chemical substances
and we recommend that you dispose of
them properly and in compliance with
any local regulations.
Remote Control Operation Range
Point the remote control unit from no
more than about 23 feet from the
remote sensor and within about 60
degrees of the front of the unit.
Service life of Batteries
●
The batteries operation period
normally last for about six months,
although this depends on how often, or
for what operations, the remote control
is used.
● If the remote control unit fails to work
even when it is operated near the player,
replace the batteries.
● The operating distance may vary
according to the brightness of the room.
Notes:
● Use new “AAA” batteries.
Notes:
● Do not point bright lights at the
remote control sensor.
●
Do not attempt to recharge,
short-circuit, disassemble or heat
batteries; do not throw them into fire.
● Do not place objects between the
remote control unit and the remote
control sensor.
● Do not drop, step on or otherwise
● Do not use this remote control unit
while simultaneously operating on any
other equipment.
batter the remote control unit. This may
damage the parts or lead to
malfunction.
a
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Do not connect the power cord until all other connections have been made.
Audio Connection: There are stereo audio output and coaxial digital audio output;
Video Connection: there are video output and S-video output. You can choose
anyone to connect.
Connecting to a TV
The connection is shown as following:
1. In this figure, there are VIDEO OUT and S-VIDEO OUT. If the TV has S-VIDEO IN
jack, you can achieve more vivid picture by connecting this jack.
2. Setup of the DVD Player
You can move courser to “TV TYPE” in “PREFERENCES” to select the corresponding
color system depending on your TV connected.
1) If TV system is PAL, set “TV TYPE” to “PAL” in “PREFERENCES” setup.
2) If TV system is NTSC, set “TV TYPE” to “NTSC” in “PREFERENCES” setup.
3) If TV system is MULTI, set “TV TYPE” to “MULTI. SYSTEM” in “PREFERENCES”
setup.
“PREFERENCES” is not available while a disc is playing. (During playback, press
the STOP button twice repeatedly to stop playback completely).
You can select any one of video out connections depending on the TV type.
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
3. Y Cb Cr video connection
If a display device with Y/Cb/Cr jacks is connected, then you should connect the jacks
with three Y/Cb/Cr cables:
1) Press the SETUP button to access the setup menu.
2) Press the up/down direction buttons to select “VIDEO OUTPUT” in
“PREFERENCES”.
3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to
confirm.
IMPORTANT: Y/Cb/Cr uses interlacing. Please move switch on the rear panel to the
location of “interlace” setting.
4. Y/Pb/Pr connection
If a display device with Y/Pb/Pr jacks is connected, then you should connect the jacks
with three Y/Pb/Pr cables:
1) Press the SETUP button to access the setup menu.
2) Press the up/down direction buttons to select “VIDEO OUTPUT” in
“PREFERENCES”.
3) Select “YPBPR/YCBCR” in “VIDEO OUTPUT”, then press the ENTER button to
confirm.
IMPORTANT: Y/Pb/Pr uses progressive scan. Please move the switch on the rear
panel to the location of “progressive” setting.
- 13 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an Analog Amplifier
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an Amplifier with 5.1 CH Audio Output
Audio Connection: To experience the best possible sound from your DVD player, you
should use the 5.1 channel audio connections. To do this, connect the 5.1 CH AUDIO
OUT jacks on the DVD player to the corresponding AUDIO IN on your amplifier.
Ensure that each channel is connected correctly. For example, the subwoofer output
from the DVD player must be connected to the subwoofer input on your amplifier.
Video Connection: Only one video connection is required. You may select one of
video connection to your TV.
Make some relevant setup in “SPEAKER SETUP”.
You can select 2CH or 5.1CH during connection.
You can select any one of video out connections according to your TV type.
- 15 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
Connecting to an Amplifier with Dolby Digital Decoder
If the amplifier has Dolby Digital decoding function, set the output format of digital
audio signal in setup menu to “SPDIF/RAW”.
An optical digital audio cable or coaxial audio cable (both optional) is required for
these connections, as shown above. Only one connection is needed, not both at
the same time.
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
Preparation After connection, turn on the power of relevant equipment and select
video input.
1. Turn on the player’s power
Press the EJECT button on front panel to turn on the power and the player will search
for the disc automatically. If there is a disc in, the player will play it.
2. Press the EJECT button on front panel or the OPEN/CLOSE button on remote
control to open the disc tray.
3. Load the disc into the disc tray
Load the disc into the disc tray with the disc label side facing up so as not to damage
the player or the disc.
4. Press the EJECT button or the OPEN/CLOSE button to close the disc tray and
begin to play the disc.
Warning: Do not play bad quality discs in order not to damage the lens.
DVD Playback
Menu
Normally there is a selecting menu in a DVD disc. You can use the MENU button to
enter the selecting menu directly, and use direction buttons to choose the item you like
and press the ENTER button to enter it.
Title & Chapter
Normally there are several titles in a DVD disc, and also there are several chapters in
a title. You can select any one of titles or chapters fast.
Region Restriction Code (region code)
Regional restriction codes are built in to DVD players and DVD discs for each sales
region. If the regional code of the DVD player does not match one of the regional
codes of the DVD disc, playback is not possible. The region number can be found on
the rear panel of the DVD player.
Language
There are up to 8 kinds of audio languages in a DVD disc. When you play a
multi-language DVD disc, press the AUDIO button on remote control to select a
different audio language.
NOTE: This function is only available for discs that have several audio bitstreams.
- 17 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
Subtitle
The DVD player can support up to 32 kinds of subtitles. When you play a multi-subtitle
disc, press the SUBTITLE button on remote control to select different subtitle.
Angle
The DVD player supports multi-angle function. Multi-angle means that a scene is shot
from different angles so that audience can watch from any angle. If there are multiple
angles in a scene, you can use the ANGLE button to select the angle you like to enjoy.
Press the ANGLE button repeatedly to view different angle.
Volume
During playback, press VOL+ button to increase the volume and press VOL- button to
decrease the volume.
CD Playback
The player will play all tracks continuously in default status. You can press the ꢂ/ꢃ
button or number buttons to select a certain track.
MP3 Playback
MP3 is an audio compression mode using Level 3 of the international standard MPEG,
which compresses the audio signal at the rate of 12:1. Using MP3 format, one disc
can record more than 600 minutes music, the timbre of which is similar with that of CD
discs.
There are many different formats for storing MP3 songs. Usually, one MP3 disc
includes many folders (directories) and every folder includes several files (songs). Use
the UP/DOWN direction button to select the directory you want and press the ENTER
button to enter it. Use the UP/DOWN direction button to select the song.
In playing status, you can use the ꢂ/ꢃ button to select other songs.
The player can only output stereo signal when playing MP3 discs.
There is no search by time and slow playback function for MP3 discs.
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc Play Operations
JPEG Playback
JPEG is a common picture format that has few bytes and low loss rate of picture.
Hundreds of pictures can be stored in a disc in this format. In order to realize real
digital album, use film to make”PICTURE CD”, namely JPEG format.
1. Normal Playback
Load a JPEG disc in. After reading the disc, the display may show “SMART NAVI” and
“ROOT” (the left is the menu of last level and the right is the menu of next level). Use
the ENTER button and the Left/Right direction button to select submenu with picture.
Use the Up/Down button to select the contents in the menu.
Many discs have other contents besides pictures.
2. Picture Rotation
It can be operated when the picture is displayed. Once another picture is selected, it
will be cancelled automatically.
Press the right or left direction button one time. The displayed picture rotates 90
degrees to the left or right depending upon the button pressed. To continue rotating
the picture, keep pressing the direction button.
3. Zoom of Picture
You can enlarge a JPEG to see detail up close.
Press the ZOOM button. The message ZOOM ON appears.
Press the ꢁ button, the view enlarges to 150%. Pressing the ꢁ button repeatedly
steps through 150% and 200%. To resume normal enlargement, press the ZOOM
again.
Press the STOP button to return to root menu.
- 19 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Stop
During playback, press the STOP button on remote control to stop playback. For DVD
discs, after pressing the STOP button once, if you press the PLAY button, then the
player will play from the stopped point.
Pause
Press the PAUSE/STEP button on remote control to pause, and press it repeatedly to
achieve step-by-step playback.
Repeat
1. Use the REPEAT button to repeat a title, a chapter, a track and a disc respectively
according to different discs, and also to cancel repeat.
2. Use the A-B button to repeat section A to B. Press it once to set the starting point
A, twice to set the ending point B, and the third time to cancel repeat.
Some discs do not support repeat function.
Search By Time
You can use the SEARCH button to search by time, namely to play from a specific
time. During DVD playback, press the SEARCH button once and TV screen will
display the title or chapter, then you can use number buttons to select any one of them.
Press the SEARCH button twice, then you can use number buttons to input the time
you desired (hour, minute, second), and the player will play from the inputted time.
Some DVD discs do not support search function.
Fast Forward & Rewind
Press the ꢀ/ꢁ button to activate fast forward or rewind.
Slow Forward & Rewind
Press the SLOW button to activate slow forward and rewind.
There is no slow playback function for CD and MP3 discs.
Disc Information Display
Press the DISPLAY button on remote control to display the disc information.
Play
Press the PLAY button to start playback. Press the POWER button on remote control
to enter standby status, and press it again to resume back to playback status. If there
is no operation for a long time, the player will automatically enter screen saver status
and then enter standby status.
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Functions
Program Playback
Use the PROGRAM button to activate program playback of CD discs.
Operation steps:
1. Press the STOP button on remote control to stop playback.
2. Press the PROGRAM button to enter program status.
3. The player display may show “PROGRAM P00:00”. Use number buttons to input
your favorite song numbers.
4. Press the PLAY button to begin the program playback.
Zoom Function
Use the ZOOM button on remote control to activate zooming out and zooming in
function.
Press the ZOOM button to achieve cycle of the following functions:
1.5X
2X
3X
Normal
There is no zoom function for CD and MP3 discs.
- 21 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
SETUP MENU
Press the SETUP button on the remote control to display a main menu: GENERAL
SETUP, SPEAKER SETUP, AUDIO SETUP and PREFERENCES.
Operation steps:
1. Press the SETUP button to enter the main menu.
2. Use the ▲, ▼ direction button to select the item you want to set and press the
ENTER button to enter it.
3. Similarly use the ▲, ▼ direction button to choose one item in submenu, use the ►
button to enter it.
4. Use the ▲, ▼ direction button to choose the content as you wish. Press the
ENTER button to confirm, the ◄ button to return to submenu, the ▲, ▼ direction
button to select “MAIN PAGE” and the ENTER button to return to main menu.
5. Press the SETUP button to exit from the setup menu.
“PREFERENCES” is not available while a disc is playing. (During playback, press
the STOP button on remote control twice repeatedly to stop playback completely).
GENERAL SETUP
The general setup is shown as following:
1. TV DISPLAY (NORMAL/PS, NORMAL/LB & WIDE)
The player allows you to set the best screen proportion depending on the disc.
2. PIC MODE (AUTO, FILM, VIDEO, SMART and SUPER SMART)
You can set different picture depending on your desire.
3. ANGLE MARK (ON & OFF)
Some chapters of DVD discs include many different angles information. If the angle
mark is set to be “ON”, then there will be a multi-angle mark displaying on the screen
when playing the contents with multi-angle. Here, you can use the ANGLE button to
enjoy different angles. If the angle mark is set to be “OFF”, then there will be no angle
mark on the screen.
4. OSD LANG (ENGLISH, CHINESE, FRENCH, & SPANISH)
Please select preferred language for the OSD menus.
5. CAPTIONS (ON & OFF)
Some DVD discs have hidden captions. You can choose captions on or off on screen
during playback.
6. SCREEN SAVER (ON & OFF)
You can select “ON” to activate screen saver at the time of no operation. Select “OFF”
to turn off this function.
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
SPEAKER SETUP
1. DOWNMIX (LT/RT, STEREO and 5.1CH)
Selecting “LT/RT” in the “DOWNMIX” will alter the audio output into a mixed Dolby
output.
By selecting “STEREO” in the “DOWNMIX”, the player will output a normal stereo
signal.
By selecting “5.1CH” in “DOWNMIX” will alter the setup of center and rear speakers.
2. CENTER, REAR and SUBWOOFER (ON and OFF)
Allows you to select “ON” or “OFF” for the center, rear and subwoofer. Only when
DOWNMIX is in “5.1CH” status, the setup of center, rear and subwoofer speakers can
be carried out.
3. CENTER DELAY, REAR DELAY
Having activated the center and rear speakers, now you should set “CENTER DELAY”
and “REAR DELAY”.
4. TEST TONE
This function is available only as the “DOWNMIX” is in “5.1CH” status and the disc is
not loaded.
AUDIO SETUP
1.SPDIF (OFF, SPDIF/RAW & SPDIF/PCM)
This item is used to set the format of digital audio.
“SPDIF/RAW” outputs the original. For example, if a disc being played is Dolby Digital,
then the digital audio is also Dolby Digital.
”SPDIF/PCM” means that PCM channel signal is output to speakers that has only
two output channels.
2. OP MODE (LINE OUT and RF REMOD)
Select “LINE OUT”, and then it will do linear process to audio signal during audio
decoding.
Select “RF REMOD”, and then it will do RF process to audio signal during audio
decoding.
3. COMPRESSION
You can adjust linear dynamic compression rate to achieve different compression
effects.
4. LPCM OUTPUT (LPCM 48K & LPCM 96K)
There are two kinds of sampling frequency for selection.
- 23 -
Download from Www.Somanuals.com. All Manuals Search And Download.
System Setup
PREFERENCES
You can set preferences for the following features:
1. TV TYPE (MULTI.SYSTEM, NTSC & PAL)
You can select relevant system depending on your connected TV type. It is originally
set in NTSC.
2. VIDEO OUTPUT (S-VIDEO, YPBPR/YCBCR & RGB)
You can choose the appropriate video output.
3. AUDIO, SUBTITLE and DISC MENU (ENGLISH, FRENCH, SPANISH, CHINESE &
JAPANESE)
There are several audio, subtitle and disc menu languages in some DVD discs. If
there is no preset in the disc, then the set language will have the priority to be played
first.
4. LOCALE (CHINA, FRANCE, HONG KONG, JAPAN, TAIWAN, GBR & USA)
As for the disc with local limitation, you can choose the region.
5. PARENTAL
DVD discs with parental function are divided into several levels. You can select
relevant level depending on the disc and your desire.
6. PASSWORD (CHANGE)
1) Press the ENTER button to enter password change page.
2) Press the number buttons to input the old password 3308.
3) Press number buttons to input the new password.
4) Repeat it for safety confirmation.
5) You close this procedure by pressing the ENTER button.
7. DEFAULTS (RESET)
Choose “DEFAULT” and confirm “RESET” if you want to recall the factory settings.
8. SMARTNAVI (NO MENU and WITH MENU)
You can select NO MENU or WITH MENU for playback. For example: Select NO
MENU in SMARTNAVI. Load a MP3 disc in, after searching, press the PLAY button to
active playback, also you can use the number buttons to select the desired track.
Select WITH MENU, then OSD will display selected menu after reading. Please refer
to the operating methods on MP3 playback in this user’s manual.
“PREFERENCES” is not available while a disc is playing. (During layback, press
the STOP button on remote control twice repeatedly to stop playback completely).
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Symptom
Check Item to See If:
-disc tray is closed.
-disc is loaded.
-disc is dirty or warped. If it is, clean it or press it.
-the player’s region code is the same as region code of
DVD disc.
-water condensation has occurred. If it has, remove
disc and leave player on for several hours.
The player cannot play.
There is no sound.
-system connection is correct.
-the speakers are plugged in.
-the sound setup of DVD disc is correct.
-disc is dirty or warped. If it is, clean it or press it.
-TV is turned on and in correct video mode.
-system connection is correct.
There is no picture.
Poor AV performance.
-disc is dirty or warped. If it is, clean it or press it.
-it is in A-B repeat status.
-it is true, press A-B button to cancel it.
-disc is dirty or warped. If it is, clean it or press it.
Cannot continue to play and
play a section repeatedly.
-there are obstructions between the remote control and
the player.
The remote control does not -the remote control is pointing at the player.
work.
-batteries are correctly inserted or the polarity is
correct.
-batteries are weak. If they are, replace your batteries.
Others:
Static or other external interference may cause the player to function abnormally. In
this circumstance, unplug the power-supply cord from the outlet and plug it in again to
reset the player so that the normal operation can resume. If you are still having
problems, then please disconnect the power and consult your service center or a
qualified technician.
- 25 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Laser Wavelength
Wavelength: 780/650nm
PAL/MULTI/NTSC
20Hz 20kHz ±2.5dB
≥85dB
Video System
Frequency Response
Audio Signal-to-noise Rate
Audio distortion + noise
Channel Separation
Dynamic Range
≤-70dB 1kHz
≥70dB 1kHz
≥80dB 1kHz
0.2
1.0
Analog Audio Out
Out Level: 2V±
,
Load: 10kΩ
Audio Out
Digital Audio Out
Video Out
Out Level: 0.5VP-P
,
Load: 75Ω
Out Level:1VP-P±0.2, Load:75Ω
Unbalanced Negative
Video Out
Power
Out Level: Y: 1VP-P, C: 0.286VP-P
S-Video Out
Load 75Ω
AC120V ~ 60Hz
Power Consumption 25W
Dimension
Weight
348 mm×240 mm×65 mm
About 2.8kgs
DESIGN AND SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
Confidential unpublished works. © 1992 -1997 Dolby Laboratories.
All rights reserved.
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|