ENG LIS H
The Polar Speed Sensor W.I.N.D. is designed to
measure speed and distance when cycling. No
other use is intended or implied.
Please follow the pictures on the front cover.
Product Elements
1.
2.
Polar Bike Mount and Cycling Computer
(picture 1 A)
Polar Speed Sensor, rubber part and spoke
magnet (picture 1 B)
Installing the Polar Bike Mount and Cycling
Computer
You can install the bike mount and the cycling
computer on the left or right side of the
handlebar or on the stem.
1.
Place the rubber part on the handlebar or
stem and insert the bike mount on top of it
(picture 2).
2.
Pass the cable ties over the bike mount and
adjust them around the handlebar/stem.
Secure the bike mount firmly. Cut off any
excess cable tie ends (picture 2).
Position the cycling computer on to the
bike mount. Turn the cycling computer
clockwise until you hear a click. You can
release the cycling computer by pressing it
down and simultaneously turning it counter
clockwise.
3.
Installing the Polar Speed Sensor
To install the speed sensor and spoke magnet,
you will need cutters and a cross-head
screwdriver.
1.
It is recommended to install the speed
sensor on the front fork (as in picture 1) of
your bicycle. Do not install the speed
sensor on the seat stay if the (optional)
power sensor is mounted.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
E NG L IS H
Speed Sensor Teaching
The cycling computer has to be coded to the
Speed Sensor i.e. taught to receive speed and
distance data. This enables exercising in a
group without interference from other sensors.
The cycling computer and sensor that come
with the product set have already been
synchronized but teaching is necessary when
you start using a new sensor or if you use other
bike settings than Bike 1.
Install the speed sensor to your bike as advised.
Before you start teaching, make sure that there
are no other speed sensors or cycling computers
nearby (40 m / 130 ft). The procedure only
takes a few seconds. You can teach one sensor
for each bike.
Select Settings > Bike > Bike 1/2/3 > Speed.
Select On/Off and On to turn the speed on.
Press OK. Teach new sensor? is displayed.
Select YES to confirm teaching. Rotate the
wheel a few times to activate the sensor. The
flashing red light indicates that the sensor is
activated. Completed is displayed once the
teaching process is over. The cycling
computer is now ready to receive speed and
distance data.
Select NO to cancel the teaching. The
teaching is cancelled and the cycling
computer resumes contact with the previous
sensor.
To return to Time mode, press and hold the
BACK button.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLI SH
Care and Maintenance
Keep the speed sensor clean. Clean it with a
mild soap and water solution and rinse off with
clean water. Dry it carefully with a soft towel.
Never use alcohol or any abrasive material such
as steel wool or cleaning chemicals. Do not
immerse the speed sensor in water.
Your safety is important to us. Make sure that
you can turn your handlebars normally and that
the cable wires for brakes or gears do not catch
the bike mount or the sensor. Also, make sure
that the sensor does not disturb pedaling or
using the brakes or gears. While riding your
bike, keep your eyes on the road to prevent
possible accidents and injury. Avoid hard hits as
these may damage the sensor.
Speed Sensor Battery
Contact your authorized Polar Service Center for
a replacement of speed sensor. Polar recycles
used sensors. For more information on local
after sales services, consult the Polar Customer
Service Card.
Frequently Asked Questions
What should I do if...
...the speed reading is 0.0 or there is no speed
reading while cycling?
Start searching for the data again by
pressing and holding the LIGHT button and
selecting Seek sensor.
Make sure the position and distance of the
sensor to the magnet are appropriate.
Check that you have activated the speed
function in the cycling computer. For further
information, see Speed Sensor Teaching.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
E NG L IS H
If the 0.0 reading appears irregularly, this
may be due to temporary electromagnetic
interference in your current surroundings.
If the 0.0 reading is constant, you may have
exceeded 3000 riding hours and the battery
is empty.
Check speed is displayed?
Make sure your speed sensor is positioned
correctly. Rotate the wheel a few times to
activate the sensor. The flashing red light
indicates that the sensor is activated. Also
the battery of your speed sensor may be
empty. For futher information, see Care and
Maintenance.
Sensor not found and Try again? are
displayed?
Press OK to start seeking.
...there are irregular speed, distance or heart
rate readings?
Electromagnetic interference, as well as
interference from other wireless cycling
computers, may affect readings of speed,
distance and heart rate.
Disturbances may occur near high voltage
power lines, traffic lights, overhead lines of
electric railways, electric bus lines or trams,
WLAN base stations, car motors, bike
computers, some motor driven exercise
equipment, cellular phones, or when walking
through electric security gates.
Technical Specification
Operating
-10 ºC to +50 ºC / +14 ºF to
+122 ºF
temperature:
Battery life:
Accuracy:
Average 3000 riding hours
±1 %
Material:
Water resistance:
Thermoplastic polymer
Splash proof
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLI SH
Limited Polar International Guarantee
This limited Polar international guarantee is
issued by Polar Electro Inc. for consumers
who have purchased this product in the USA
or Canada. This limited Polar international
guarantee is issued by Polar Electro Oy for
consumers who have purchased this product
in other countries.
Polar Electro Inc./Polar Electro Oy
guarantees to the original
consumer/purchaser of this product that the
product will be free from defects in material
or workmanship for two years from the date
of purchase.
Please keep the receipt, which is your
proof of purchase!
The guarantee does not cover the battery,
damage due to misuse, abuse, accidents or
non-compliance with the precautions,
improper maintenance, commercial use, and
cracked or broken cases.
The guarantee does not cover any damage/s,
losses, costs or expenses, direct, indirect or
incidental, consequential or special, arising
out of, or related to the product. During the
guarantee period the product will be either
repaired or replaced at an authorized service
center free of charge.
This guarantee does not affect the
consumer
national or state laws in force, or the
consumer
from their sales/purchase contract.
This product is compliant with Directive
93/42/EEC. The relevant Declaration of
Conformity is available at
6
Download from Www.Somanuals.com. All Manuals Search And Download.
E NG L IS H
This crossed out wheeled bin marking shows
that Polar products are electronic devices and
are in the scope of Directive 2002/96/EC of the
European Parliament and of the Council on
waste electrical and electronic equipment
(WEEE). These products should thus be
disposed of separately in EU countries. Polar
encourages you to minimize possible effects of
waste on the environment and human health,
also outside the European Union, by following
local waste disposal regulations and, where
possible, utilizing separate collection of
electronic devices.
Copyright © 2007 Polar Electro Oy, FIN-90440
KEMPELE, Finland.
Polar Electro Oy is a ISO 9001:2000 certified
company.
All rights reserved. No part of this manual may
be used or reproduced in any form or by any
means without prior written permission of Polar
Electro Oy. The names and logos marked with a
of this product are trademarks of Polar Electro
Oy. The names and logos marked with a ®
symbol in this user manual or in the package of
this product are registered trademarks of Polar
Electro Oy.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGLI SH
Disclaimer
The material in this manual is for informational
purposes only. The products it describes are
subject to change without prior notice, due to
the manufacturer
program.
Polar Electro Inc./Polar Electro Oy makes no
representations or warranties with respect to
this manual or with respect to the products
described herein.
Polar Electro Inc./Polar Electro Oy shall not be
liable for any damages, losses, costs or
expenses, direct, indirect or incidental,
consequential or special, arising out of, or
related to the use of this material or the
products described herein.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|